//+
−
// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).+
−
// All rights reserved.+
−
// This component and the accompanying materials are made available+
−
// under the terms of "Eclipse Public License v1.0"+
−
// which accompanies this distribution, and is available+
−
// at the URL "http://www.eclipse.org/legal/epl-v10.html".+
−
//+
−
// Initial Contributors:+
−
// Nokia Corporation - initial contribution.+
−
//+
−
// Contributors:+
−
//+
−
// Description:+
−
//+
−
+
−
+
−
RUN_UTILS	MkDir	${SYSDRIVE}\bluetooth\+
−
RUN_UTILS	MkDir	${SYSDRIVE}\bluetooth\tbtsockAPI\+
−
+
−
LOAD_SUITE	T_BTSockAPI -SharedData+
−
DELAY		2000+
−
+
−
+
−
//! @file+
−
//! @SYMTestSuiteName		BT-USER-SOCK-PublicAPI-Active-Slave+
−
//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command3NewL+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetFamily		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command6SetFamily+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command7SetPort+
−
			COMMAND		CBluetoothSocket1	Bind		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command9Bind+
−
			COMMAND		CBluetoothSocket1	Listen		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command10Listen+
−
			COMMAND		CBluetoothSessionSocket	SetRsocketServerFromCBTSocket		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command12SetRsocketServerFromCBTSocket+
−
			COMMAND		CBluetoothSessionSocket	NewL		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0001command13NewL+
−
			STORE	CBluetoothSocket1	+
−
			STORE	CBluetoothSessionSocket	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	+
−
			CREATE_OBJECT	TBTDevAddr	TBTDevAddrLocal	+
−
			COMMAND		TBTDevAddrLocal	Construct+
−
			COMMAND		TBTDevAddrLocal	OpenHostResolver		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0002command3OpenHostResolver+
−
			COMMAND		TBTDevAddrLocal	SetHostNameL		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0002command4SetHostNameL+
−
			COMMAND		TBTDevAddrLocal	SetDiscoverable+
−
			STORE	CBluetoothSocket1	+
−
			STORE	CBluetoothSessionSocket	+
−
			STORE	TBTDevAddrLocal	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Active-SetBTAddresses-0003+
−
	START_TEST_BLOCK	300	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	+
−
			COMMAND		CBluetoothSocket1	Accept		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0003command1Accept+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE	CBluetoothSessionSocket	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Active-SetBTAddresses-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Active-SetBTAddresses-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrLocal	+
−
			CREATE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSessionSocket	Recv		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0004command1Recv+
−
			OUTSTANDING+
−
			COMMAND		TBTDevAddrLocal	SetBTAddr		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0004command3SetBTAddr+
−
			COMMAND		TBTDevAddrRemote	Construct+
−
			COMMAND		TBTDevAddrRemote	SetBTAddr		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0004command6SetBTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	CBluetoothSessionSocket	+
−
			STORE	TBTDevAddrLocal	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Active-SetBTAddresses-0004+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Active-SetBTAddresses-0005+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSessionSocket	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSessionSocket	Shutdown		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0005command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSessionSocket	~+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses-0005command4Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Active-SetBTAddresses-0005+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Passive-SetBTAddresses+
−
+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0001+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0001+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		27/03/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket changing the event notifier +
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, SetNotifier, Send()1, +
−
//!				HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Use SetNotifier to change the notifier of events (A special notifier implementation will be used)+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0001-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0001-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0001-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0001-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0001-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0001-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	SetNotifier		BT-USER-SOCK-PublicAPI-Active-0001-0002command1SetNotifier+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0001-0002command2Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0001-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0001-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0001-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0001-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0001-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0001-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0001-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0001+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0002+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0002+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		27/03/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewLC()1, Connect()2, HandleConnectCompleteL, Send()2, HandleSendCompleteL, LocalName(), RemoteName()+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewLC()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect()2 of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Get the address of the local device+
−
//!				15. Get the address of the remote device+
−
//!				16. Send data to the socket using Send()2+
−
//!				17. HandleSendCompleteL gets called verify that there is no error code+
−
//!				18. Get result from slave+
−
//!				19. Order slave to cleanup+
−
//!				20. Wait for slave +
−
//!				21. Do socket cleanup+
−
//!				22. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewLC		BT-USER-SOCK-PublicAPI-Active-0002-0001command2NewLC+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0002-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0002-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0002-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0002-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0002-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	SetOpt		BT-USER-SOCK-PublicAPI-Active-0002-0002command1SetOpt+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0002-0002command2Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0002-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0002-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrLocal	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	LocalName		BT-USER-SOCK-PublicAPI-Active-0002-0003command1LocalName+
−
			COMMAND		CBluetoothSocket1	RemoteName		BT-USER-SOCK-PublicAPI-Active-0002-0003command2RemoteName+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0002-0003command3Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TBTDevAddrLocal	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0002-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0002-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0002-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0002+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0004+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0004+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		27/03/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0004-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0004-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0004-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0004-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0004-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0004-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0004-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0004-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0004-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0004-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0004-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0004-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0004-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0004-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0004+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0006+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0006+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Configure Outgoing MTU+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Ioctl()2,  +
−
//!				HandleIoctlCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Call Ioctl()2 with KL2CAPOutgoingMTUIoctl, Buffer, KSolBtL2CAP+
−
//!				18. HandleIoctlCompleteL gets called when operation completes+
−
//!				19. Order slave to cleanup+
−
//!				20. Wait for slave +
−
//!				21. Do socket cleanup+
−
//!				22. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and MTU configured+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0006-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0006-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0006-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0006-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0006-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0006-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0006-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0006-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0006-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0006-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0006-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0006-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Ioctl		BT-USER-SOCK-PublicAPI-Active-0006-0004command1Ioctl+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
		DELAY		2000+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0006-0005command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0006-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0006+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0007+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0007+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Configure Outgoing MTU, followed by cancel+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Ioctl()2, +
−
//!				CancelIoctl, HandleIoctlCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Call Ioctl()2 with KL2CAPOutgoingMTUIoctl, Buffer, KSolBtL2CAP+
−
//!				17. Call CancelIoctl (Bundle with Ioctl()2 to make sure it is cancelled?)+
−
//!				18. HandleIoctlCompleteL gets called when Ioctl operation is cancelled+
−
//!				19. Get result from slave+
−
//!				20. Order slave to cleanup+
−
//!				21. Wait for slave +
−
//!				22. Do socket cleanup+
−
//!				23. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and Ioctlt request cancelled+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0007-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0007-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0007-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0007-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0007-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0007-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0007-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0007-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0007-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0007-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0007-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0007-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			DELAY	1000+
−
			COMMAND		CBluetoothSocket1	Ioctl		BT-USER-SOCK-PublicAPI-Active-0007-0004command2Ioctl+
−
			COMMAND		CBluetoothSocket1	CancelIoctl+
−
            OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
		DELAY		2000+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0007-0005command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0007-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0007+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0008+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0008+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Configure Outgoing MTU +
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Ioctl()1, +
−
//!				HandleIoctlCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Call Ioctl()1 with KSolBtL2CAP, KL2CAPOutgoingMTUIoctl, Buffer, +
−
//!				18. HandleIoctlCompleteL gets called when operation completes+
−
//!				19. Order slave to cleanup+
−
//!				20. Wait for slave +
−
//!				21. Do socket cleanup+
−
//!				22. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully Ioctl request successful+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0008-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0008-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0008-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0008-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0008-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0008-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0008-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0008-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0008-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0008-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0008-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0008-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0008-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0008-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0008+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0009+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0009+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Client side to Configure Incoming MTU on server side+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Ioctl()1, +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//!				Synchronization point+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully Ioctl request successful on slave side+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0009-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0009-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0009-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0009-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0009-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0009-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0009-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0009-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0009-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0009-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0009-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0009-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0009-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0009-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0009+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0010+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0010+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Test low power switching+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, AllowLowPowerModes,+
−
//!				CancelLowPowerModeRequester, PreventLowPowerModes +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call AllowLowPowerModes+
−
//!				15. Call CancelLowPowerModeRequester+
−
//!				16. Call PreventLowPowerModes +
−
//!				17. Send data to the socket using Send()1+
−
//!				18. HandleSendCompleteL gets called verify that there is no error code+
−
//!				19. Get result from slave+
−
//!				20. Order slave to cleanup+
−
//!				21. Wait for slave +
−
//!				22. Do socket cleanup+
−
//!				23. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and lowpower switching is successful+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0010-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0010-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0010-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0010-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0010-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0010-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0010-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0010-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0010-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	AllowLowPowerModes+
−
			COMMAND		CBluetoothSocket1	CancelLowPowerModeRequester+
−
			COMMAND		CBluetoothSocket1	PreventLowPowerModes+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0010-0003command4Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0010-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0010-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0010-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0010-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0010+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0011+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0011+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Verify Baseband notifier functionality+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				ActivateBasebandEventNotifier, HandleActivateBasebandEventNotifierCompleteL, +
−
//!				PhysicalLinkState, CancelBasebandEventNotifier+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call ActivateBasebandEventNotifier+
−
//!				15. HandleActivateBasebandEventNotifierCompleteL will get called with status info+
−
//!				16. Call PhysicalLinkState+
−
//!				17. HandleActivateBasebandEventNotifierCompleteL will get called with status info+
−
//!				18. Call CancelBasebandEventNotifier+
−
//!				19. Call PhysicalLinkState+
−
//!				20. HandleActivateBasebandEventNotifierCompleteL should not get called (see if this can be verified here, otherwise separate test)+
−
//!				21. Get result from slave+
−
//!				22. Order slave to cleanup+
−
//!				23. Wait for slave +
−
//!				24. Do socket cleanup+
−
//!				25. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and baseband notification switching is successful+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0011-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0011-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0011-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0011-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0011-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0011-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0011-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0011-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0011-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0011-0003command1Send+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	ActivateBasebandEventNotifier		BT-USER-SOCK-PublicAPI-Active-0011-0003command2ActivateBasebandEventNotifier+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	PhysicalLinkState		BT-USER-SOCK-PublicAPI-Active-0011-0003command3PhysicalLinkState+
−
			COMMAND		CBluetoothSocket1	CancelBasebandEventNotifier+
−
			COMMAND		CBluetoothSocket1	PhysicalLinkState+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0011-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0011-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0011-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0011-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0011+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0012+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0012+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Verify role switching functionality+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, PreventRoleSwitch,+
−
//!				AllowRoleSwitch, RequestSlaveRole, RequestMasterRole +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				11. Call PreventRoleSwitch and verify return value+
−
//!				12. Call AllowRoleSwitch and verify return value+
−
//!				13. Call RequestSlaveRole and verify return value+
−
//!				14. Call RequestMasterRole and verify return value+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and role switching is correct+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0012-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0012-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0012-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0012-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0012-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0012-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0012-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0012-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0012-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0012-0003command1Send+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	PreventRoleSwitch+
−
			COMMAND		CBluetoothSocket1	AllowRoleSwitch+
−
			COMMAND		CBluetoothSocket1	RequestSlaveRole+
−
			COMMAND		CBluetoothSocket1	RequestMasterRole+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0012-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0012-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0012-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0012-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0012+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0013+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0013+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Verify park and sniff requester calls+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				ActivateSniffRequester, ActivateParkRequester +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call ActivateParkRequester  and verify return value+
−
//!				15. Call ActivateSniffRequester and verify return value//!				16. Get result from slave+
−
//!				16. Order slave to cleanup+
−
//!				17. Wait for slave +
−
//!				18. Do socket cleanup+
−
//!				19. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully, park and sniff requester calls correctly+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0013-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0013-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0013-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0013-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0013-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0013-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0013-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0013-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0013-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0013-0003command1Send+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	ActivateParkRequester+
−
			COMMAND		CBluetoothSocket1	ActivateSniffRequester+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0013-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0013-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0013-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0013-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0013+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0014+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0014+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Cancel send of data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Send()1, CancelSend, +
−
//!				HandleSendCompleteL   +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. Call CancelSend before the send operation is completed+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data send is cancelled+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0014-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0014-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0014-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0014-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0014-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0014-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0014-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0014-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0014-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			DELAY	1000+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0014-0003command2Send+
−
			COMMAND		CBluetoothSocket1	CancelSend+
−
            OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0014-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0014-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0014-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0014-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0014+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0015+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0015+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Cancel send of data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Send()1, CancelAll,+
−
//!				HandleSendCompleteL +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. Call CancelAll before the send operation is completed+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data send is cancelled+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0015-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0015-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0015-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0015-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0015-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0015-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0015-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0015-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0015-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			DELAY	10000+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0015-0003command2Send+
−
			COMMAND		CBluetoothSocket1	CancelAll+
−
            OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0015-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0015-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0015-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0015-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0015+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0016+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0016+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket, recovery is cancelled on passive side+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Send()1, +
−
//!				HandleSendCompleteL +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully, recovery is cancelled on passive side+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0016-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0016-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0016-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0016-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0016-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0016-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0016-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0016-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0016-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0016-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0016-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0016-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0016-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0016-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0016+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0017+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0017+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Write, +
−
//!				HandleSendCompleteL +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using write+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0017-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0017-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0017-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0017-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0017-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0017-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0017-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0017-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0017-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Write		BT-USER-SOCK-PublicAPI-Active-0017-0003command1Write+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0017-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0017-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0017-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0017-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0017+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0018+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0018+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Cancel send of data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Write, CancelWrite,+
−
//!				HandleSendCompleteL +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Write+
−
//!				15. Call CancelWrite to cancel the write operation+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data send cancelled successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0018-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0018-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0018-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0018-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0018-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0018-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0018-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0018-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0018-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			DELAY	1000+
−
			COMMAND		CBluetoothSocket1	Write		BT-USER-SOCK-PublicAPI-Active-0018-0003command2Write+
−
			COMMAND		CBluetoothSocket1	CancelWrite+
−
            OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0018-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0018-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0018-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0018-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0018+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0019+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0019+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket, read will be cancelled on passive side+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Write, +
−
//!				HandleSendCompleteL +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using write+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully, read will be cancelled on passive side+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0019-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0019-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0019-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0019-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0019-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0019-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0019-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0019-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0019-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Write		BT-USER-SOCK-PublicAPI-Active-0019-0003command1Write+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0019-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0019-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0019-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0019-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0019+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0020+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0020+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		05/04/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket so that RecvOneOrMore can be verified on passive side+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Send()1, +
−
//!				HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0020-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0020-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0020-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0020-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0020-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0020-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0020-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0020-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0020-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0020-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0020-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0020-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0020-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0020-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0020+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0021+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0021+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		06/04/2006+
−
//! @SYMTestCaseDesc		Connection setup successfully to test GetDisconnectData method+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, GetDisconnectData +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Call GetDisconnectData to see if any disconnect data is available (protocol specific if there is or not)+
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully to test GetDisconnectData method+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0021-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0021-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0021-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0021-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0021-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0021-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0021-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0021-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0021-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0021-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0021-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0021-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		!Error=-5 CBluetoothSocket1	GetDisconnectData+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0021-0004command2Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0021-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0021+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0022+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0022+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		06/04/2006+
−
//! @SYMTestCaseDesc		Test RequestChangeSupportedPacketTypes method+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				RequestChangeSupportedPacketTypes, GetDisconnectData +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call RequestChangeSupportedPacketTypes with a bad packet type+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults	RequestChangeSupportedPacketTypes fails with error KErrArgument (-6)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0022-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0022-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0022-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0022-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0022-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0022-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0022-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0022-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0022-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND	!Error=-6	CBluetoothSocket1	RequestChangeSupportedPacketTypes		BT-USER-SOCK-PublicAPI-Active-0022-0003command1RequestChangeSupportedPacketTypes+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0022-0003command2Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0022-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0022-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0022-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0022-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0022+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0023+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0023+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to send data over a BT socket while already sending+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. Immediately send data to the socket again, using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is error code KErrInUse+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully but second send returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0023-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0023-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0023-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0023-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0023-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0023-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0023-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0023-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0023-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		!Error=-14  CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0023-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0023-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0023-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0023-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0023-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0023+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0024+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0024+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to send data over a BT socket while already sending+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()2, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()2+
−
//!				15. Immediately send data to the socket again, using Send()2+
−
//!				16. HandleSendCompleteL gets called verify that there is error code KErrInUse+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully but second send returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0024-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0024-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0024-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0024-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0024-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0024-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0024-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0024-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0024-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		!Error=-14  CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0024-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0024-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0024-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0024-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0024-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0024+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0025+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0025+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Cancel send of data over a BT socket without first sending any data+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Send()1, CancelSend, +
−
//!				HandleSendCompleteL   +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call CancelSend before calling the send operation+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0025-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0025-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0025-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0025-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0025-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0025-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0025-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0025-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0025-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	CancelSend+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0025-0003command2Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0025-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0025-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0025-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0025-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0025+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0026+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0026+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0026-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0026-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0026-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0026-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0026-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0026-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0026-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0026-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0026-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0026-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0026-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0026-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0026-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0026-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0026+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0027+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0027+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0027-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0027-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0027-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0027-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0027-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0027-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0027-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0027-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0027-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0027-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0027-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0027-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0027-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0027-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0027+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0028+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0028+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0028-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0028-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0028-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0028-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0028-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0028-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0028-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0028-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0028-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0028-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0028-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0028-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0028-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0028-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0028+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0029+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0029+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0029-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0029-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0029-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0029-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0029-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0029-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0029-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0029-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0029-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0029-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0029-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0029-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0029-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0029-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0029+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0030+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0030+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0030-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0030-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0030-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0030-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0030-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0030-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0030-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0030-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0030-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0030-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0030-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0030-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0030-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0030-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0030+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0031+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0031+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0031-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0031-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0031-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0031-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0031-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0031-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0031-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0031-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0031-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0031-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0031-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0031-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0031-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0031-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0031+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0032+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0032+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to send data over a BT socket while already sending+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Write(), HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Write()+
−
//!				15. Immediately send data to the socket again, using Write()+
−
//!				16. HandleSendCompleteL gets called verify that there is error code KErrInUse+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully but second send returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0032-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0032-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0032-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0032-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0032-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0032-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0032-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0032-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0032-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		!Error=-14  CBluetoothSocket1	Write		BT-USER-SOCK-PublicAPI-Active-0032-0003command1Write+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0032-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0032-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0032-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0032-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0032+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0033+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0033+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Cancel send of data over a BT socket without first sending any data+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Write(), CancelWrite, +
−
//!				HandleSendCompleteL   +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call CancelWrite before calling the write operation+
−
//!				15. Send data to the socket using Write()+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0033-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0033-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0033-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0033-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0033-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0033-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0033-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0033-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0033-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	CancelWrite+
−
			COMMAND		CBluetoothSocket1	Write		BT-USER-SOCK-PublicAPI-Active-0033-0003command2Write+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0033-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0033-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0033-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0033-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0033+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0034+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0034+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to connect to a BT device while already connected+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object, using Connect()1+
−
//!				12. Immediately connect again, using Connect()1+
−
//!				13. HandleConnectCompleteL gets called indicating that connecting the BT connection completed with KErrInUse+
−
//!				14. Get result from slave+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully but second connect returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0034-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0034-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0034-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0034-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0034-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0034-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0034-0002command1Connect+
−
			COMMAND		!Error=-14 CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0034-0002command2Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0034-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0034-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0034-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0034-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0034-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0034-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0034-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0034+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0035+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0035+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to connect to a BT device while already connected+
−
//!				Uses API elements: NewL()1, Connect()2, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object, using Connect()1+
−
//!				12. Immediately connect again, using Connect()2+
−
//!				13. HandleConnectCompleteL gets called indicating that connecting the BT connection completed with KErrInUse+
−
//!				14. Get result from slave+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully but second connect returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0035-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0035-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0035-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0035-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0035-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0035-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0035-0002command1Connect+
−
			COMMAND !Error=-14	CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0035-0002command2Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0035-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0035-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0035-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0035-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0035-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0035-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0035-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0035+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0036+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0036+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to connect to a BT device while already connected+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object, using Connect()1+
−
//!				12. Immediately connect again, using Connect()3+
−
//!				13. HandleConnectCompleteL gets called indicating that connecting the BT connection completed with KErrInUse+
−
//!				14. Get result from slave+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully but second connect returns KErrAlreadyExists (-11)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0036-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0036-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0036-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0036-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0036-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0036-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0036-0002command1Connect+
−
			COMMAND !Error=-11	CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0036-0002command2Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0036-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0036-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0036-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0036-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0036-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0036-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0036-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0036+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0037+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0037+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to cancel connect to a BT device without already being connected+
−
//!				Uses API elements: NewL()1, CancelConnect(), Connect()1, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Try to cancel connection+
−
//!				12. Use the TRfcommSockAddr in the connect of the CBluetooth object, using Connect()1+
−
//!				13. HandleConnectCompleteL gets called indicating that connecting the BT connection completed with no error+
−
//!				14. Get result from slave+
−
//!				15. Send data to the socket using Send()1+
−
//!				16. HandleSendCompleteL gets called verify that there is no error code+
−
//!				17. Get result from slave+
−
//!				18. Order slave to cleanup+
−
//!				19. Wait for slave +
−
//!				20. Do socket cleanup+
−
//!				21. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0037-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0037-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0037-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0037-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0037-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0037-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	CancelConnect+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0037-0002command2Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0037-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0037-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0037-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0037-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0037-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0037-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0037-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0037+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0040+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0040+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0040-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0040-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0040-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0040-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0040-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0040-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0040-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0040-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0040-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0040-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0040-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0040-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0040-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0040-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0040+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0041+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0041+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to apply an asynchronous control operation on a socket while another ioctl command is still being used+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Ioctl()2,  +
−
//!				HandleIoctlCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Call Ioctl()2 with KL2CAPOutgoingMTUIoctl, Buffer, KSolBtL2CAP+
−
//!				18. Immediately call Ioctl()2 again, with KL2CAPOutgoingMTUIoctl, Buffer, KSolBtL2CAP+
−
//!				19. HandleIoctlCompleteL gets called when operation completes with KErrInUse+
−
//!				20. Order slave to cleanup+
−
//!				21. Wait for slave +
−
//!				22. Do socket cleanup+
−
//!				23. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and MTU configured, but second Ioctl() returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0041-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0041-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0041-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0041-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0041-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0041-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0041-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0041-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0041-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0041-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0041-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0041-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		!Error=-14  CBluetoothSocket1	Ioctl		BT-USER-SOCK-PublicAPI-Active-0041-0004command1Ioctl+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
		DELAY		2000+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0041-0005command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0041-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0041+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0042+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0042+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to cancel an asynchronous control operation on a socket without applying one first+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, Ioctl()2,  +
−
//!				HandleIoctlCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Call CancelIoctl(), without calling Ioctl() first+
−
//!				18. Call Ioctl()2 with KL2CAPOutgoingMTUIoctl, Buffer, KSolBtL2CAP+
−
//!				19. HandleIoctlCompleteL gets called when operation completes+
−
//!				20. Order slave to cleanup+
−
//!				21. Wait for slave +
−
//!				22. Do socket cleanup+
−
//!				23. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and MTU configured+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0042-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0042-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0042-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0042-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0042-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0042-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0042-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0042-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0042-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0042-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0042-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0042-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	CancelIoctl+
−
			COMMAND		CBluetoothSocket1	Ioctl		BT-USER-SOCK-PublicAPI-Active-0042-0004command2Ioctl+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
		DELAY		2000+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0042-0005command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0042-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0042+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0043+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0043+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to set up notification of baseband events while baseband event notifier is already being used+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				ActivateBasebandEventNotifier, HandleActivateBasebandEventNotifierCompleteL, +
−
//!				PhysicalLinkState, CancelBasebandEventNotifier+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call ActivateBasebandEventNotifier+
−
//!				15. Immediately call ActivateBasebandEventNotifier again+
−
//!				16. HandleActivateBasebandEventNotifierCompleteL will get called with error KErrInUse+
−
//!				17. Call PhysicalLinkState+
−
//!				18. HandleActivateBasebandEventNotifierCompleteL will get called with status info+
−
//!				19. Call CancelBasebandEventNotifier+
−
//!				20. Call PhysicalLinkState+
−
//!				21. HandleActivateBasebandEventNotifierCompleteL should not get called (see if this can be verified here, otherwise separate test)+
−
//!				22. Get result from slave+
−
//!				23. Order slave to cleanup+
−
//!				24. Wait for slave +
−
//!				25. Do socket cleanup+
−
//!				26. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and baseband notification switching is successful, but second call returns KErrInUse (-14)+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0043-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0043-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0043-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0043-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0043-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0043-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0043-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0043-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0043-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0043-0003command1Send+
−
			OUTSTANDING+
−
			DELAY	1+
−
			COMMAND		CBluetoothSocket1	ActivateBasebandEventNotifier		BT-USER-SOCK-PublicAPI-Active-0043-0003command3ActivateBasebandEventNotifier+
−
            OUTSTANDING+
−
			COMMAND		!Error=-14  CBluetoothSocket1	ActivateBasebandEventNotifier		BT-USER-SOCK-PublicAPI-Active-0043-0003command4ActivateBasebandEventNotifier+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	PhysicalLinkState+
−
			COMMAND		CBluetoothSocket1	CancelBasebandEventNotifier+
−
			COMMAND		CBluetoothSocket1	PhysicalLinkState+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0043-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0043-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0043-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0043-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0043+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0044+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0044+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Try to cancel notification of baseband events without setting one up first+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				ActivateBasebandEventNotifier, CancelBasebandEventNotifier(), HandleActivateBasebandEventNotifierCompleteL, +
−
//!				PhysicalLinkState, CancelBasebandEventNotifier+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call CancelBasebandEventNotifier() with calling ActivateBasebandEventNotifier() first+
−
//!				15. Call ActivateBasebandEventNotifier+
−
//!				16. HandleActivateBasebandEventNotifierCompleteL will get called with no error+
−
//!				17. Call PhysicalLinkState+
−
//!				18. HandleActivateBasebandEventNotifierCompleteL will get called with status info+
−
//!				19. Call CancelBasebandEventNotifier+
−
//!				20. Call PhysicalLinkState+
−
//!				21. HandleActivateBasebandEventNotifierCompleteL should not get called (see if this can be verified here, otherwise separate test)+
−
//!				22. Get result from slave+
−
//!				23. Order slave to cleanup+
−
//!				24. Wait for slave +
−
//!				25. Do socket cleanup+
−
//!				26. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and baseband notification switching is successful+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0044-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0044-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0044-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0044-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0044-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0044-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0044-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0044-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0044-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0044-0003command1Send+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	CancelBasebandEventNotifier+
−
			COMMAND		CBluetoothSocket1	ActivateBasebandEventNotifier		BT-USER-SOCK-PublicAPI-Active-0044-0003command3ActivateBasebandEventNotifier+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	PhysicalLinkState+
−
			COMMAND		CBluetoothSocket1	CancelBasebandEventNotifier+
−
			COMMAND		CBluetoothSocket1	PhysicalLinkState+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0044-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0044-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0044-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0044-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0044+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0003+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0003+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		27/03/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect()1 of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection failed at connect due to cancellation at server+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0003-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0003-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0003-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0003-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0003-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0003-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			DELAY	1000000+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0003-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0003-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0003-0003+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0003+
−
+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0005+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0005+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			Johan Eriksson+
−
//! @SYMCreationDate		27/03/2006+
−
//! @SYMTestCaseDesc		Cancel BT connect+
−
//!				Uses API elements: NewL()1, Connect()1, CancelConnect, HandleConnectCompleteL +
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. Call CancelConnect (Bundle with connect to make sure it is cancelled?)+
−
//!				13. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				14. Get result from slave+
−
//!				15. Order slave to cleanup+
−
//!				16. Wait for slave +
−
//!				17. Do socket cleanup+
−
//!				18. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection failed at connect due to cancellation at client+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0005-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0005-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0005-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0005-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0005-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0005-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0005-0002command2Connect+
−
			COMMAND		CBluetoothSocket1	CancelConnect		BT-USER-SOCK-PublicAPI-Active-0005-0002command3CancelConnect+
−
            OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0005-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0005-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0005-0003+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0005+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0051+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0051+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		11/08/2006+
−
//! @SYMTestCaseDesc		Verify SetAutomaticSniffMode() calls+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				SetAutomaticSniffMode1, SetAutomaticSniffMode2+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call SetAutomaticSniffMode1+
−
//!				15. Call SetAutomaticSniffMode2+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully, SetAutomaticSniffMode calls correctly+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0051-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0051-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0051-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0051-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0051-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0051-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0051-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0051-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0051-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0051-0003command1Send+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	SetAutomaticSniffMode		BT-USER-SOCK-PublicAPI-Active-0051-0003command2SetAutomaticSniffMode+
−
			COMMAND		CBluetoothSocket1	SetAutomaticSniffMode		BT-USER-SOCK-PublicAPI-Active-0051-0003command3SetAutomaticSniffMode+
−
			COMMAND		CBluetoothSocket1	SetAutomaticSniffMode		BT-USER-SOCK-PublicAPI-Active-0051-0003command4SetAutomaticSniffMode+
−
			COMMAND		CBluetoothSocket1	SetAutomaticSniffMode		BT-USER-SOCK-PublicAPI-Active-0051-0003command5SetAutomaticSniffMode+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0051-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0051-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0051-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0051-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0051+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0052+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0052+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		11/08/2006+
−
//! @SYMTestCaseDesc		Try using bad SetAutomaticSniffMode() calls+
−
//!				Uses API elements: NewL()1, Connect()1, HandleConnectCompleteL, +
−
//!				SetAutomaticSniffMode1, SetAutomaticSniffMode2+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Call SetAutomaticSniffMode2 with invalid delay+
−
//!				15. Get result from slave+
−
//!				16. Order slave to cleanup+
−
//!				17. Wait for slave +
−
//!				18. Do socket cleanup+
−
//!				19. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	SetAutomaticSniffMode returns KErrArgument+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0052-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0052-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0052-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0052-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0052-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0052-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0052-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0052-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0052-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0052-0003command1Send+
−
			OUTSTANDING+
−
			COMMAND		!Error=-6   CBluetoothSocket1	SetAutomaticSniffMode		BT-USER-SOCK-PublicAPI-Active-0052-0003command2SetAutomaticSniffMode+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0052-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0052-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0052-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0052-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0052+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0045+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0045+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		10/08/2006+
−
//! @SYMTestCaseDesc		Send blank data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0045-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0045-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0045-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0045-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0045-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0045-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0045-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0045-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0045-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0045-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0045-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0045-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0045-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0045-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0045+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0049+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0049+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		10/08/2006+
−
//! @SYMTestCaseDesc		Send blank data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()2, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()2+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0049-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0049-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0049-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0049-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0049-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0049-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0049-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0049-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0049-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0049-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0049-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0049-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0049-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0049-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0049+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0050+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0050+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		10/08/2006+
−
//! @SYMTestCaseDesc		Send blank data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Write(), HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Write()+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0050-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0050-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0050-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0050-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0050-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0050-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0050-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0050-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0050-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Write		BT-USER-SOCK-PublicAPI-Active-0050-0003command1Write+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0050-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0050-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0050-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0050-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0050+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0046+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0046+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		10/08/2006+
−
//! @SYMTestCaseDesc		Send data over a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0046-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0046-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0046-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0046-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0046-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0046-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0046-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0046-0002+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0046-0003+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-SOCK-PublicAPI-Active-0046-0003command1Send+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0046-0003+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0046-0004+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0046-0004command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0046-0004+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0046+
−
+
−
+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0038+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0038+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Connect to a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0038-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0038-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0038-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0038-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0038-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0038-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0038-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
		DELAY		2000+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0038-0003command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0038-0002+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0038+
−
+
−
+
−
START_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0039+
−
//! @SYMTestCaseID		BT-USER-SOCK-PublicAPI-Active-Slave-0039+
−
//! @SYMAPI			CBluetoothSocket+
−
//! @SYMAuthor			James Mechen+
−
//! @SYMCreationDate		07/08/2006+
−
//! @SYMTestCaseDesc		Connect to a BT socket+
−
//!				Uses API elements: NewL()1, Connect()3, HandleConnectCompleteL, Send()1, HandleSendCompleteL+
−
//! @SYMTestActions		1. Order slave to set up connection   +
−
//!				2. Get result from slave to wait for it to be ready		+
−
//!				3. Create a connection to the RSocket server+
−
//!				4. Create the CBluetoothSocket object using NewL()1 (Standard constructor)+
−
//!				5. Create an empty TBTServiceSecurity object+
−
//!				6. Create a TRfcommSockAddr object+
−
//!				7. Set the Security of the TRfcommSockAddr (Use default/empty as on server)+
−
//!				8. Set the BT address of the TRfcommSockAddr to the one of the Casira pod of the slave that we connect to+
−
//!				9. Set the port to the specific one of the protocol we use+
−
//!				10. Verify the set BT Address+
−
//!				11. Use the TRfcommSockAddr in the connect of the CBluetooth object+
−
//!				12. HandleConnectCompleteL gets called indicating that connecting the BT connection completed+
−
//!				13. Get result from slave+
−
//!				14. Send data to the socket using Send()1+
−
//!				15. HandleSendCompleteL gets called verify that there is no error code+
−
//!				16. Get result from slave+
−
//!				17. Order slave to cleanup+
−
//!				18. Wait for slave +
−
//!				19. Do socket cleanup+
−
//!				20. delete CBluetoothSocket object+
−
//! @SYMTestStatus		Implemented+
−
//! @SYMTestPriority		Critical+
−
//! @SYMTestExpectedResults  	Connection setup successfully and data sent successfully+
−
//! @SYMTestType		CIT+
−
+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-SOCK-PublicAPI-Active-0039-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct+
−
			COMMAND		TRfcommSockAddr1	Construct+
−
			COMMAND		TRfcommSockAddr1	SetSecurity		BT-USER-SOCK-PublicAPI-Active-0039-0001command7SetSecurity+
−
			COMMAND		TRfcommSockAddr1	SetBTAddr		BT-USER-SOCK-PublicAPI-Active-0039-0001command8SetBTAddr+
−
			COMMAND		TRfcommSockAddr1	SetPort		BT-USER-SOCK-PublicAPI-Active-0039-0001command9SetPort+
−
			COMMAND		TRfcommSockAddr1	BTAddr		BT-USER-SOCK-PublicAPI-Active-0039-0001command10BTAddr+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TRfcommSockAddr1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
	START_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0039-0002+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TRfcommSockAddr	TRfcommSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-SOCK-PublicAPI-Active-0039-0002command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
		DELAY		2000+
−
	START_TEST_BLOCK	100	T_BTSockAPI	\bluetooth\BT-USER-SOCK-PublicApi-Active-Slave.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		CBluetoothSocket1	Shutdown		BT-USER-SOCK-PublicAPI-Active-0039-0003command1Shutdown+
−
			OUTSTANDING+
−
			COMMAND		CBluetoothSocket1	~+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose+
−
	END_TEST_BLOCK+
−
	END_SYNCHRONISED_TESTCASE BT-USER-SOCK-PublicAPI-Passive-Master-0039-0002+
−
+
−
END_TESTCASE BT-USER-SOCK-PublicAPI-Active-Slave-0039+
−
+
−