//+
−
// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).+
−
// All rights reserved.+
−
// This component and the accompanying materials are made available+
−
// under the terms of "Eclipse Public License v1.0"+
−
// which accompanies this distribution, and is available+
−
// at the URL "http://www.eclipse.org/legal/epl-v10.html".+
−
//+
−
// Initial Contributors:+
−
// Nokia Corporation - initial contribution.+
−
//+
−
// Contributors:+
−
//+
−
// Description:+
−
//+
−
///////////////////////////////////////////////////////////////////////////////+
−
//! @file+
−
//! @SYMTestSuiteName			T_BTUserAPI+
−
//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.+
−
//! @SYMScriptDescription		Tests all public elements of the RBTPhysicalLinkAdapter classe+
−
//!								as a means of confidence that the API works as expected. +
−
//!								The purpose is to provide a regression test suite of PublishedAll APIs for +
−
//!								BT USER related classes.+
−
//!								Negative testing is performed to confirm that correct errors are returned +
−
//!								when incorrect parameters are given. The tests are fully automated.+
−
//! @SYMAuthor					Zoe Chen+
−
//! @SYMCreationDate			03/04/2007+
−
///////////////////////////////////////////////////////////////////////////////+
−
+
−
RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\+
−
RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\+
−
+
−
LOAD_SUITE	T_BTUserAPI+
−
DELAY		500+
−
+
−
+
−
// ****************************************************************************+
−
// RBTPhysicalLinkAdapter+
−
// **************************************************************************** +
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0001+
−
//! @SYMAPI							RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc				Create a RBTPhysicalLinkAdapter object+
−
//!									Uses API elements: 	RBTPhysicalLinkAdapter()+
−
//! @SYMTestActions					Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			RBTPhysicalLinkAdapter object was created successfully+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0001+
−
+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0002+
−
//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ+
−
//! @SYMTestCaseDesc				Open a physical link adapter on an existing physical link+
−
//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks+
−
//!														RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter+
−
//!														RSocketServ(), Connect() and Close() from RSocketServ+
−
//! @SYMTestActions					1. Create and start a session on the socket server+
−
//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful+
−
//!									3. Bring in a new member to the piconet with a device address(11111111) using +
−
//!									   CreateConnection() function. Return KErrNone if successful+
−
//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									5. Open a physical link adapter on an existing physical link with a device address(11111111)+
−
//!									   using Open()2 function. Return KErrNone if successful+
−
//!									6. Close the physical link adapter using Close() function+
−
//!									7. Delete the socket using destructor+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			KErrNone returned+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	+
−
			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
			COMMAND		RSocketServ1	RSocketServ	+
−
			COMMAND		RSocketServ1	Connect	+
−
			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command5NewL+
−
			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command6CreateConnection+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0002-0001command9Open+
−
			COMMAND		RBTPhysicalLinkAdapter1	Close	+
−
			COMMAND		CBluetoothPhysicalLinks1	~	+
−
			COMMAND		RSocketServ1	Close	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0002+
−
+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0003+
−
//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ+
−
//! @SYMTestCaseDesc				Check whether the physical link adapter is open+
−
//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks+
−
//!														RBTPhysicalLinkAdapter(), Open()2 and IsOpen() from RBTPhysicalLinkAdapter+
−
//!														RSocketServ(), Connect() and Close() from RSocketServ+
−
//! @SYMTestActions					1. Create and start a session on the socket server+
−
//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful+
−
//!									3. Bring in a new member to the piconet with a device address(11111111) using +
−
//!									   CreateConnection() function. Return KErrNone if successful+
−
//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									5. Check whether the physical link adapter is open using IsOpen() function. +
−
//!									6. Verify that the result (False) is as expected (False)+
−
//!									7. Open a physical link adapter on an existing physical link with a device address(11111111)+
−
//!									   using Open()2 function. Return KErrNone if successful+
−
//!									8. Check whether the physical link adapter is open using IsOpen() function.+
−
//!									9. Verify that the result (True) is as expected (True)+
−
//!									10. Delete the socket using destructor+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			True if the physical link adapter is open, otherwise false+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	+
−
			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
			COMMAND		RSocketServ1	RSocketServ	+
−
			COMMAND		RSocketServ1	Connect	+
−
			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command5NewL+
−
			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command6CreateConnection+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND		RBTPhysicalLinkAdapter1	IsOpen		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command9IsOpen+
−
			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command10Open+
−
			COMMAND		RBTPhysicalLinkAdapter1	IsOpen		BT-USER-BTPhysicalLinkAdapter-PublicApi-0003-0001command11IsOpen+
−
			COMMAND		CBluetoothPhysicalLinks1	~	+
−
			COMMAND		RSocketServ1	Close	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0003+
−
+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0004+
−
//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ+
−
//! @SYMTestCaseDesc				Update the set of baseband packet types that are allowed locally+
−
//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks+
−
//!														RBTPhysicalLinkAdapter(), Open()2, RequestChangeSupportedPacketTypes() and Close() from RBTPhysicalLinkAdapter+
−
//!														RSocketServ(), Connect() and Close() from RSocketServ+
−
//! @SYMTestActions					1. Create and start a session on the socket server+
−
//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful+
−
//!									3. Bring in a new member to the piconet with a device address(11111111) using +
−
//!									   CreateConnection() function. Return KErrNone if successful+
−
//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									5. Open a physical link adapter on an existing physical link with a device address(11111111)+
−
//!									   using Open()2 function. Return KErrNone if successful+
−
//!									6. Update the set of baseband packet types that are allowed locally using +
−
//!									   RequestChangeSupportedPacketTypes() function. Return KErrNone if successful+
−
//!									7. Close the physical link adapter using Close() function+
−
//!									8. Delete the socket using destructor+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			KErrNone returned+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	+
−
			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
			COMMAND		RSocketServ1	RSocketServ	+
−
			COMMAND		RSocketServ1	Connect	+
−
			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command5NewL+
−
			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command6CreateConnection+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command9Open+
−
			COMMAND		RBTPhysicalLinkAdapter1	RequestChangeSupportedPacketTypes		BT-USER-BTPhysicalLinkAdapter-PublicApi-0004-0001command10RequestChangeSupportedPacketTypes+
−
			COMMAND		RBTPhysicalLinkAdapter1	Close	+
−
			COMMAND		CBluetoothPhysicalLinks1	~	+
−
			COMMAND		RSocketServ1	Close	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0004+
−
+
−
+
−
// ****************************************************************************+
−
// Negative test cases+
−
// ****************************************************************************+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0005+
−
//! @SYMAPI							RBTPhysicalLinkAdapter and RSocketServ+
−
//! @SYMTestCaseDesc				Open a physical link adapter on a socket which is not open and connected+
−
//!									Uses API elements: 	RBTPhysicalLinkAdapter(), Open()1 and Close() from RBTPhysicalLinkAdapter+
−
//!														RSocketServ(), Connect() and Close() from RSocketServ+
−
//! @SYMTestActions					1. Create and start a session on the socket server+
−
//!									2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									3. Open a physical link adapter on an existing physical with a RSocket object link+
−
//!									   using Open()1 function. Return KErrNone if successful+
−
//!									4. Close the physical link adapter using Close() function+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			KErrNotReady(-18) returned at step 2+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			CREATE_OBJECT	RSocket	RSocket1	+
−
			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
			COMMAND		RSocketServ1	RSocketServ	+
−
			COMMAND		RSocketServ1	Connect	+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND	!Error=-18	RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0005-0001command6Open+
−
			COMMAND		RBTPhysicalLinkAdapter1	Close	+
−
			COMMAND		RSocketServ1	Close	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0005+
−
+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0007+
−
//! @SYMAPI							RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks and RSocketServ+
−
//! @SYMTestCaseDesc				Block a role switch+
−
//!									Uses API elements: 	NewL(), CreateConnection() and destructor from CBluetoothPhysicalLinks+
−
//!														RBTPhysicalLinkAdapter(), Open()2, AllowRoleSwitch(), PreventRoleSwitch() and Close() from RBTPhysicalLinkAdapter+
−
//!														RSocketServ(), Connect() and Close() from RSocketServ+
−
//! @SYMTestActions					1. Create and start a session on the socket server+
−
//!									2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful+
−
//!									3. Bring in a new member to the piconet with a device address(22222222) using +
−
//!									   CreateConnection() function. Return KErrNone if successful+
−
//!									4. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									5. Open a physical link adapter on an existing physical link with a device address(22222222)+
−
//!									   using Open()2 function. Return KErrNone if successful+
−
//!									6. Ensure this object does not block a role switch using AllowRoleSwitch() function.+
−
//!									   Return KErrNone if successful+
−
//!									7. Block a role switch using PreventRoleSwitch() function. Return KErrNone if successful+
−
//!									8. Close the physical link adapter using Close() function+
−
//!									9. Delete the socket using destructor+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			KErrDisconnected(-36) returned at step 6 and 7+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinks1	+
−
			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
			COMMAND		RSocketServ1	RSocketServ	+
−
			COMMAND		RSocketServ1	Connect	+
−
			COMMAND		CBluetoothPhysicalLinks1	NewL		BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command5NewL+
−
			COMMAND		CBluetoothPhysicalLinks1	CreateConnection		BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command6CreateConnection+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0007-0001command9Open+
−
			COMMAND	!Error=-36	RBTPhysicalLinkAdapter1	AllowRoleSwitch	+
−
			COMMAND	!Error=-36	RBTPhysicalLinkAdapter1	PreventRoleSwitch	+
−
			COMMAND		RBTPhysicalLinkAdapter1	Close	+
−
			COMMAND		CBluetoothPhysicalLinks1	~	+
−
			COMMAND		RSocketServ1	Close	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0007+
−
+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0008+
−
//! @SYMAPI							RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc				Check whether the physical link adapter is open+
−
//!									Uses API elements: RBTPhysicalLinkAdapter() and IsOpen()+
−
//! @SYMTestActions					1. Create an empty RBTPhysicalLinkAdapter object+
−
//!									2. Verify that if the physical link adapter is open+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			Returned False+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND		RBTPhysicalLinkAdapter1	IsOpen		BT-USER-BTPhysicalLinkAdapter-PublicApi-0008-0001command2IsOpen+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0008+
−
+
−
+
−
START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0009+
−
//! @SYMAPI							RBTPhysicalLinkAdapter and RSocketServ+
−
//! @SYMTestCaseDesc				Open a physical link adapter on a socket which is not open and connected+
−
//!									Uses API elements: 	RBTPhysicalLinkAdapter(), Open()2 and Close() from RBTPhysicalLinkAdapter+
−
//!														RSocketServ(), Connect() and Close() from RSocketServ+
−
//! @SYMTestActions					1. Create and start a session on the socket server+
−
//!									2. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									3. Open a physical link adapter without an existing physical links using Open()2 function.+
−
//!									   Return KErrNone if successful+
−
//!									4. Close the physical link adapter using Close() function+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			KErrNone returned+
−
//! @SYMTestType					CIT+
−
+
−
	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
			COMMAND		RSocketServ1	RSocketServ	+
−
			COMMAND		RSocketServ1	Connect	+
−
			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0009-0001command6Open+
−
			COMMAND		RBTPhysicalLinkAdapter1	Close	+
−
			COMMAND		RSocketServ1	Close	+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0009+
−
+
−
+
−
//!START_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006+
−
//! @SYMTestCaseID					BT-USER-BTPhysicalLinkAdapter-PublicApi-0006+
−
//! @SYMAPI							RBTPhysicalLinkAdapter and RSocketServ+
−
//! @SYMTestCaseDesc				Open a physical link adapter on a socket which is not open and connected+
−
//!									Uses API elements: 	RBTPhysicalLinkAdapter() and Open()2+
−
//! @SYMTestActions					1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!									2. Open a physical link adapter without an existing physical links+
−
//! @SYMTestStatus					Implemented+
−
//! @SYMTestPriority				Low+
−
//! @SYMTestExpectedResults			Panic at step 2+
−
//! @SYMTestType					CIT+
−
+
−
//!	START_TEST_BLOCK	10	T_BTUserAPI	\bluetooth\user\BT-USER-BTPhysicalLinkAdapter-PublicApi.ini+
−
//!			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapter1	+
−
//!			CREATE_OBJECT	RSocketServ	RSocketServ1	+
−
//!			COMMAND		RBTPhysicalLinkAdapter1	RBTPhysicalLinkAdapter	+
−
//!			COMMAND		RBTPhysicalLinkAdapter1	Open		BT-USER-BTPhysicalLinkAdapter-PublicApi-0006-0001command2Open+
−
//!	END_TEST_BLOCK	!PanicCode=3	!PanicString=KERN-EXEC+
−
+
−
//!END_TESTCASE BT-USER-BTPhysicalLinkAdapter-PublicApi-0006+
−
+
−
+
−
DELAY		2000+
−