//+
−
// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).+
−
// All rights reserved.+
−
// This component and the accompanying materials are made available+
−
// under the terms of "Eclipse Public License v1.0"+
−
// which accompanies this distribution, and is available+
−
// at the URL "http://www.eclipse.org/legal/epl-v10.html".+
−
//+
−
// Initial Contributors:+
−
// Nokia Corporation - initial contribution.+
−
//+
−
// Contributors:+
−
//+
−
// Description:+
−
//+
−
///////////////////////////////////////////////////////////////////////////////+
−
//! @file+
−
//! @SYMTestSuiteName			T_BTUserAPI+
−
//! @SYMScriptTestEnvironment	This test script requires a basic ROM with bluetooth dongle.+
−
//! @SYMScriptDescription		Tests all public elements of the RBTPhysicalLinkAdapter class+
−
//!								as a means of confidence that the API works as expected. +
−
//!								The purpose is to provide a regression test suite of PublishedAll APIs for +
−
//!								BT USER related classes.+
−
//!								Negative testing is performed to confirm that correct errors are returned +
−
//!								when incorrect parameters are given. The tests are fully automated.+
−
//! @SYMAuthor					Ting Yen and PaiHung Huang+
−
//! @SYMCreationDate			11/09/2007+
−
///////////////////////////////////////////////////////////////////////////////+
−
+
−
RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\+
−
RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\user\+
−
+
−
LOAD_SUITE	UCCControlTE+
−
LOAD_SUITE	T_BTUserAPI	-SharedData+
−
DELAY		2000+
−
+
−
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncService+
−
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartTDService+
−
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini BuildRunAdapterAutoPassiveSlave+
−
+
−
DELAY		5000+
−
// ****************************************************************************+
−
// Set up BT Addresses+
−
// ****************************************************************************+
−
+
−
START_TESTCASE BT-USER-PublicApi-Master-SetBTAddresses+
−
+
−
	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			COMMAND		CBluetoothSocket1	RSocketServerConnect		+
−
			COMMAND		CBluetoothSocket1	NewL		BT-USER-PublicApi-Active-SetBTAddresses-0001command2NewL+
−
			COMMAND		TBTServiceSecurity1	Construct		+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TBTServiceSecurity1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	DELAY		2000+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	+
−
			CREATE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TBTServiceSecurity	TBTServiceSecurity1	+
−
			COMMAND		TBTDevAddrRemote	Construct		+
−
			COMMAND		TBTDevAddrRemote	OpenHostResolver		BT-USER-PublicApi-Active-SetBTAddresses-0002command3OpenHostResolver+
−
			COMMAND		TBTDevAddrRemote	SetHostNameL		BT-USER-PublicApi-Active-SetBTAddresses-0002command4SetHostNameL+
−
			COMMAND		TBTDevAddrRemote	GetDeviceAddress		BT-USER-PublicApi-Active-SetBTAddresses-0002command5GetDeviceAddress+
−
			OUTSTANDING+
−
			COMMAND		TL2CAPSockAddr1	TL2CAPSockAddr		+
−
			COMMAND		TL2CAPSockAddr1	SetSecurity		BT-USER-PublicApi-Active-SetBTAddresses-0002command8SetSecurity+
−
			COMMAND		TL2CAPSockAddr1	SetBTAddr		BT-USER-PublicApi-Active-SetBTAddresses-0002command9SetBTAddr+
−
			COMMAND		TL2CAPSockAddr1	BTAddr		BT-USER-PublicApi-Active-SetBTAddresses-0002command10BTAddr+
−
			COMMAND		TL2CAPSockAddr1	SetPort		BT-USER-PublicApi-Active-SetBTAddresses-0002command11SetPort+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	TL2CAPSockAddr1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	DELAY		5000+
−
	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	+
−
			COMMAND		CBluetoothSocket1	Connect		BT-USER-PublicApi-Active-SetBTAddresses-0003command1Connect+
−
			OUTSTANDING+
−
			STORE	CBluetoothSocket1	+
−
			STORE	TL2CAPSockAddr1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	START_TEST_BLOCK	100	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			CREATE_OBJECT	TBTDevAddr	TBTDevAddrLocal	+
−
			COMMAND		TBTDevAddrLocal	Construct		+
−
			COMMAND		TBTDevAddrLocal	SetBTAddr		BT-USER-PublicApi-Active-SetBTAddresses-0004command3SetBTAddr+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-PublicApi-Active-SetBTAddresses-0004command5Send+
−
			OUTSTANDING	+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
+
−
END_TESTCASE BT-USER-PublicApi-Master-SetBTAddresses+
−
+
−
DELAY		2000+
−
+
−
// ****************************************************************************+
−
// RBluetoothPhysicalLinkAdapter Master+
−
// **************************************************************************** +
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0001+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0001+
−
//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Check whether the physical link adapter is open+
−
//!								Uses API elements: 	RSocketServ() and Connect() from RSocketServ+
−
//!													NewL() and CreateConnection() from CBluetoothPhysicalLinks+
−
//!													HandleCreateConnectionCompleteL() from MBluetoothPhysicalLinksNotifier+
−
//!													RBTPhysicalLinkAdapter(), Open()2, IsOpen() and Close() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				1. Create and start a session on the socket server+
−
//!								2. Open a Bluetooth socket using NewL() function. Return KErrNone if successful+
−
//!								3. Bring in a new member to the piconet with a device address using CreateConnection()+
−
//!								   function. Return KErrNone if successful+
−
//!								4. Return callback HandleCreateConnectionCompleteL() function+
−
//!								5. Verify that if return result (decimal 0) from callback function is as expected (decimal 0)+
−
//!								6. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								7. Check whether the physical link adapter is open using IsOpen() function+
−
//!								8. Verify that the result (False) is as expected (False)+
−
//!								9. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								10. Check whether the physical link adapter is open using IsOpen() function+
−
//!								11. Verify that the result (True) is as expected (True)+
−
//!								12. Close the physical link adapter using Close() function+
−
//!								13. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		False returned at step 8, True returned at step 11+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			CREATE_OBJECT	RSocketServ	RSocketServData	+
−
			CREATE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	+
−
			COMMAND		RSocketServData	RSocketServ		+
−
			COMMAND		RSocketServData	Connect		+
−
			COMMAND		CBluetoothPhysicalLinksData	NewL		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command5NewL+
−
			COMMAND		CBluetoothPhysicalLinksData	CreateConnection		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command6CreateConnection+
−
			OUTSTANDING	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command10IsOpen+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command11Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0001-0001command12IsOpen+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE	CBluetoothPhysicalLinksData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0001+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0002+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0002+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Sniff Mode+
−
//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, IsOpen(), PhysicalLinkState(), ActivateSniffRequester() and Close()+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Check whether the physical link adapter is open using IsOpen() function+
−
//!								4. Verify that the result (True) is as expected (True)+
−
//!								5. Get the state of the physical link using PhysicalLinkState() function+
−
//!								6. Verify that the result (3178245) is as expected (3178245)+
−
//!								7. Start a facility that will continually attempt to put the physical link into Sniff Mode+
−
//!								   using ActivateSniffRequester() function. Return KErrNone if successful+
−
//!								8. Get the state of the physical link using PhysicalLinkState() function+
−
//!								9. Verify that the result (3178245) is as expected (3178245)+
−
//!								10. Close the physical link adapter using Close() function+
−
//!								11. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrNone returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	DELAY		5000+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command3Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command4IsOpen+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command5PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	ActivateSniffRequester		+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0002-0001command7PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0002+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0003+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0003+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Cancel a facility that is continually requesting a low power mode+
−
//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, IsOpen(), PhysicalLinkState(), ActivateParkRequester(), CancelLowPowerModeRequester() and Close()+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Check whether the physical link adapter is open using IsOpen() function+
−
//!								4. Verify that the result (True) is as expected (True)+
−
//!								5. Get the state of the physical link using PhysicalLinkState() function+
−
//!								6. Verify that the result (3178245) is as expected (3178245)+
−
//!								7. Start a facility that will continually attempt to put the physical link into Park Mode+
−
//!								   using ActivateParkRequester() function. Return KErrNone if successful+
−
//!								8. Get the state of the physical link using PhysicalLinkState() function+
−
//!								9. Verify that the result (3178245) is as expected (3178245)+
−
//!								10. Cancel a facility that is continually requesting a low power mode using CancelLowPowerModeRequester()+
−
//!								    function. Return KErrNone if successful+
−
//!								11. Close the physical link adapter using Close() function+
−
//!								12. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrNone returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	DELAY		5000+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command3Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command4IsOpen+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command5PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	ActivateParkRequester		+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0003-0001command7PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	CancelLowPowerModeRequester		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0003+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0004+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0004+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Attempt to be the Bluetooth Master of a Piconet+
−
//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, RequestSlaveRole(), PhysicalLinkState() and Close()+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Attempt to be the Bluetooth Slave of a Piconet using RequestSlaveRole() function.+
−
//!								   Return KErrNone if successful+
−
//!								4. Get the state of the physical link using PhysicalLinkState() function+
−
//!								5. Verify that the result (3178246) is as expected (3178246)+
−
//!								6. Close the physical link adapter using Close() function+
−
//!								7. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrNone returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	DELAY		5000+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0004-0001command3Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	RequestSlaveRole		+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0004-0001command5PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0004+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0005+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0005+
−
//! @SYMAPI						RBTPhysicalLinkAdapter, CBluetoothPhysicalLinks, RSocketServ+
−
//! @SYMTestCaseDesc			Attempt to be a Bluetooth Slave of a Piconet+
−
//!								Uses API elements: 	RBTPhysicalLinkAdapter(), Open()2, RequestSlaveRole(), PhysicalLinkState(), Close() and destructor from RBTPhysicalLinkAdapter+
−
//!													destructor from CBluetoothPhysicalLinks+
−
//!													Close() from RSocketServ+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Attempt to be a Bluetooth Slave of a Piconet using RequestSlaveRole() function.+
−
//!								   Return KErrNone if successful+
−
//!								4. Get the state of the physical link using PhysicalLinkState() function+
−
//!								5. Verify that the result (3178246) is as expected (3178246)+
−
//!								6. Close the physical link adapter using Close() function+
−
//!								7. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrNone returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	DELAY 5000+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0005-0001command3Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	RequestSlaveRole		+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0005-0001command5PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0005+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0006+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0006+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Park Mode+
−
//!								Uses API elements: RBTPhysicalLinkAdapter(), Open()2, IsOpen(), PhysicalLinkState(), NotifyNextBasebandChangeEvent(), CancelNextBasebandChangeEventNotifier(), ActivateParkRequester() and Close()+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Check whether the physical link adapter is open using IsOpen() function+
−
//!								4. Verify that the result (True) is as expected (True)+
−
//!								5. Get the state of the physical link using PhysicalLinkState() function+
−
//!								6. Verify that the result (3178246) is as expected (3178246)+
−
//!								7. Request a notification with ENotifyParkMode using NotifyNextBasebandChangeEvent() function+
−
//!								8. Verify that the result (16) is as expected (16)+
−
//!								9. Cancel a currently requested notification using CancelNextBasebandChangeEventNotifier() function+
−
//!								10. Start a facility that will continually attempt to put the physical link into Park Mode +
−
//!								   using ActivateParkRequester() function. Return KErrNone if successful+
−
//!								11. Get the state of the physical link using PhysicalLinkState() function+
−
//!								12. Verify that the result (3178258) is as expected (3178258)+
−
//!								13. Close the physical link adapter using Close() function+
−
//!								14. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrCancel returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	DELAY		5000+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command3Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command4IsOpen+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command5PhysicalLinkState+
−
			COMMAND	!AsyncError=-3		RBTPhysicalLinkAdapterData	NotifyNextBasebandChangeEvent		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command6NotifyNextBasebandChangeEvent+
−
			COMMAND		RBTPhysicalLinkAdapterData	CancelNextBasebandChangeEventNotifier		+
−
			OUTSTANDING	+
−
			COMMAND		RBTPhysicalLinkAdapterData	ActivateParkRequester		+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0006-0001command10PhysicalLinkState+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	DELAY		5000	+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0006+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0007+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0007+
−
//! @SYMAPI						RBTPhysicalLinkAdapter, CBluetoothSocket, MBluetoothSocketNotifier+
−
//! @SYMTestCaseDesc			Update the set of baseband packet types that are allowed locally+
−
//!								Uses API elements: 	RBTPhysicalLinkAdapter(), Open()2, RequestChangeSupportedPacketTypes(), NotifyNextBasebandChangeEvent(), PhysicalLinkState() and Close() from RBTPhysicalLinkAdapter+
−
//!													Send()1 from CBluetoothSocket+
−
//!													HandleSendCompleteL() from MBluetoothSocketNotifier+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Update the set of baseband packet types that are allowed locally with EPacketsDM1+
−
//!								   using RequestChangeSupportedPacketTypes() function. Return KErrNone if successful+
−
//!								4. Get the state of the physical link using PhysicalLinkState() function+
−
//!								5. Verify that the result (3178246) is as expected (3178246)+
−
//!								6. Request a notification with ENotifyPacketsDM1 using NotifyNextBasebandChangeEvent() function+
−
//!								7. Verify that the result (16) is as expected (16)+
−
//!								8. Send data to a remote bluetooth device using Send()1 function. Return KErrNone if successful+
−
//!								9. HandleSendCompleteL() gets called verify that there is no error code+
−
//!								10. Close the physical link adapter using Close() function+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrNone returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	START_TEST_BLOCK	1000	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command3Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command4PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	NotifyNextBasebandChangeEvent		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command5NotifyNextBasebandChangeEvent+
−
			COMMAND		RBTPhysicalLinkAdapterData	RequestChangeSupportedPacketTypes		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command6RequestChangeSupportedPacketTypes+
−
			OUTSTANDING	+
−
			COMMAND		CBluetoothSocket1	Send		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0007-0001command9Send+
−
			OUTSTANDING	+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	RSocketServData	+
−
			STORE	CBluetoothSocket1	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0007+
−
+
−
+
−
// ****************************************************************************+
−
// RBluetoothPhysicalLinkAdapter Negative Test Cases+
−
// ****************************************************************************	+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0008+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0008+
−
//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Update an invalid baseband packet type (EPacketsHV1) locally+
−
//!								Uses API elements: 	Close() from RSocketServ+
−
//!													destructor from CBluetoothPhysicalLinks+
−
//!													RBTPhysicalLinkAdapter(), Open()2, PhysicalLinkState(), RequestChangeSupportedPacketTypes() and Close() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				1. Create a RBTPhysicalLinkAdapter object using RBTPhysicalLinkAdapter() function+
−
//!								2. Open a physical link adapter on an existing physical link with a device address+
−
//!								   using Open()2 function. Return KErrNone if successful+
−
//!								3. Get the state of the physical link using PhysicalLinkState() function+
−
//!								4. Verify that the result (3146502) is as expected (3146502)+
−
//!								5. Update the set of baseband packet types that are allowed locally with EPacketsHV1 +
−
//!								   using RequestChangeSupportedPacketTypes() function. Return KErrNone if successful+
−
//!								6. Close the physical link adapter using Close() function+
−
//!								7. Destroy the physical link adapter object+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		Error at step 6. KErrArgument(-6) returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	TL2CAPSockAddr	TL2CAPSockAddr1	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001command7Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001command8PhysicalLinkState+
−
			COMMAND	!Error=-6		RBTPhysicalLinkAdapterData	RequestChangeSupportedPacketTypes		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0008-0001command9RequestChangeSupportedPacketTypes+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			STORE	TBTDevAddrRemote	+
−
			STORE	TL2CAPSockAddr1	+
−
			STORE	RSocketServData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0008+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0009+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0009+
−
//! @SYMAPI						RSocketServ, CBluetoothPhysicalLinks, MBluetoothPhysicalLinksNotifier, RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Get the state of the physical link without opening a physical link adapter+
−
//!								Uses API elements: 	PhysicalLinkState() and Open() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				1. Get the state of the physical link+
−
//!								2. Open a physical link adapter on an existing physical link defined by the remote address +
−
//!								3. Get the state of the physical link+
−
//!								4. Verify that the result (decimal 3146502) is as expected (decimal 3146502)+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		Error at step 1. KErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			CREATE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	TBTDevAddr	TBTDevAddrRemote	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	RBTPhysicalLinkAdapter		+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0009-0001command3PhysicalLinkState+
−
			COMMAND		RBTPhysicalLinkAdapterData	Open		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0009-0001command4Open+
−
			COMMAND		RBTPhysicalLinkAdapterData	PhysicalLinkState		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0009-0001command5PhysicalLinkState+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE	RSocketServData	+
−
			STORE	TBTDevAddrRemote	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0009+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0010+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0010+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Attempt to be a Bluetooth Master of a piconet without opening a physical link adapter+
−
//!								Uses API elements: 	AllowRoleSwitch() and Close() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				1. Close the physical link adapter+
−
//!								2. Attempt to be a Bluetooth Master of a piconet and return KErrNone if successful+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		Error at Step 2. KErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	RequestMasterRole		+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0010+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0011+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0011+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Ensure not to block the use of a specified set of low power modes without opening a physcial link adapter+
−
//!								Uses API elements: 	IsOpen() and AllowLowPowerModes() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				1. Verify that if a physical link adapter has not been opened and returned result (false) is as expected+
−
//!								2. Ensure this object does not block the use of a specified set (EAnyLowPowerMode) of low power modes+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		Error at step 2. KErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0011-0001command1IsOpen+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	AllowLowPowerModes		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0011-0001command2AllowLowPowerModes+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0011+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0012+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0012+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Active Mode without opening a physical link adapter+
−
//!								Uses API elements: 	ActivateActiveRequester() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				Start a facility that will continually attempt to put the physical link into Active Mode+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		KErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	ActivateActiveRequester		+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0012+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0013+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0013+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Block the use of a specified set of low power modes without opening a physical link adapter+
−
//!								Uses API elements: 	IsOpen() and PreventLowPowerModes() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				1. Verify that if a physical link adapter has not been opened and returned result (false) is as expected+
−
//!								2. Block the use of a specified set of low power modes (EParkMode)+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		Error at step 2. KErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0013-0001command1IsOpen+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	PreventLowPowerModes		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0013-0001command2PreventLowPowerModes+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0013+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0014+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0014+
−
//! @SYMAPI						RBTPhysicalLinkAdapter+
−
//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Sniff Mode without opening a physical link adapter+
−
//!								Uses API elements: 	IsOpen() and ActivateSniffRequester() from RBTPhysicalLinkAdapter+
−
//! @SYMTestActions				Start a facility that will continually attempt to put the physical link into Sniff Mode+
−
//!+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		ErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	ActivateSniffRequester		+
−
			STORE	RBTPhysicalLinkAdapterData	+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0014+
−
+
−
+
−
START_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0015+
−
//! @SYMTestCaseID				BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0015+
−
//! @SYMAPI						RBTPhysicalLinkAdapter, CBluetoothSocket, CBluetoothPhysicalLinks, RSocketServ+
−
//! @SYMTestCaseDesc			Start a facility that will continually attempt to put the physical link into Park Mode without opening a physical link adapter+
−
//!								Uses API elements: IsOpen(), ActivateParkRequester(), CancelNextBasebandChangeEventNotifier(), Close() and destructor from RBTPhysicalLinkAdapter+
−
//!												   Destructor() from CBluetoothSocket+
−
//!												   Destructor() from CBluetoothPhysicalLinks+
−
//!												   Close() from RSocketServ+
−
//! @SYMTestActions				1. Verify that if a physical link adapter has not been opened and returned result (false) is as expected+
−
//!								2. Start a facility that will continually attempt to put the physical link into Park Mode+
−
//!								3. Cancel a currently requested notification using CancelNextBasebandChangeEventNotifier() function+
−
//!								4. Close the physical link adapter using Close() function+
−
//!								5. Destroy the physical link adapter object+
−
//!								6. Delete CBluetoothSocket object+
−
//!								7. Delete CBluetoothPhysicalLink object+
−
//!								8. Close RSocket object+
−
//!								+
−
//! @SYMTestStatus				Implemented+
−
//! @SYMTestPriority			Critical+
−
//! @SYMTestExpectedResults		Error at step 2. ErrNotReady (-18) returned+
−
//! @SYMTestType				CIT+
−
+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StartSyncTestCase+
−
DELAY 10000+
−
	START_TEST_BLOCK	500	T_BTUserAPI	\bluetooth\user\BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto.ini+
−
			SHARED_ACTIVE_SCHEDULER+
−
			RESTORE_OBJECT	RBTPhysicalLinkAdapter	RBTPhysicalLinkAdapterData	+
−
			RESTORE_OBJECT	CBluetoothSocket	CBluetoothSocket1	+
−
			RESTORE_OBJECT	CBluetoothPhysicalLinks	CBluetoothPhysicalLinksData	+
−
			RESTORE_OBJECT	RSocketServ	RSocketServData	+
−
			COMMAND		RBTPhysicalLinkAdapterData	IsOpen		BT-USER-PhysicalLinkAdapter-PublicApi-Active-0015-0001command2IsOpen+
−
			COMMAND	!Error=-18		RBTPhysicalLinkAdapterData	ActivateParkRequester		+
−
			COMMAND		RBTPhysicalLinkAdapterData	CancelNextBasebandChangeEventNotifier		+
−
			COMMAND		RBTPhysicalLinkAdapterData	Close		+
−
			COMMAND		RBTPhysicalLinkAdapterData	~		+
−
			COMMAND		CBluetoothPhysicalLinksData	~		+
−
			COMMAND		CBluetoothSocket1	~		+
−
			COMMAND		CBluetoothSocket1	RSocketServerClose		+
−
			COMMAND		RSocketServData	Close		+
−
			STORE_ACTIVE_SCHEDULER+
−
	END_TEST_BLOCK+
−
	RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveSyncTestCaseResult+
−
+
−
END_TESTCASE BT-USER-PhysicalLinkAdapter-PublicApi-Active-Master-Auto-0015+
−
+
−
+
−
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini RetrieveExecutionResultAdapterAutoPassiveSlave+
−
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StopTDService+
−
RUN_TEST_STEP -1 UCCControlTE RunCommand \bluetooth\user\UccControlChannelConfig.ini StopSyncService+
−
+
−