diff -r 000000000000 -r 29b1cd4cb562 bluetoothapitest/bluetoothsvs/T_BTSdpAPI/scripts/BTSDP-SearchPattern-PublicApi-Unconnected.script --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/bluetoothapitest/bluetoothsvs/T_BTSdpAPI/scripts/BTSDP-SearchPattern-PublicApi-Unconnected.script Fri Jan 15 08:13:17 2010 +0200 @@ -0,0 +1,3814 @@ +// +// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies). +// All rights reserved. +// This component and the accompanying materials are made available +// under the terms of "Eclipse Public License v1.0" +// which accompanies this distribution, and is available +// at the URL "http://www.eclipse.org/legal/epl-v10.html". +// +// Initial Contributors: +// Nokia Corporation - initial contribution. +// +// Contributors: +// +// Description: +// +/////////////////////////////////////////////////////////////////////////////// +//! @file +//! @SYMTestSuiteName T_BTSdpAPI +//! @SYMScriptTestEnvironment This test script requires a basic ROM with bluetooth dongle. +//! @SYMScriptDescription Tests all public elements of the CSdpAttrValueURL, CSdpSearchPattern, SdpUtil, +//! CElementParser, CSdpAttrValueInt, CSdpAttrValueUint, RSdpDatabase, and RSdp classes +//! as a means of confidence that the API works as expected. +//! The purpose is to provide a regression test suite of PublishedAll APIs for +//! BT SDP related classes. +//! Negative testing is performed to confirm that correct errors are returned +//! when incorrect parameters are given. The tests are fully automated. +//! @SYMAuthor Symbio +//! @SYMCreationDate 21/09/2006 +/////////////////////////////////////////////////////////////////////////////// + + +RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\ +RUN_UTILS MkDir ${SYSDRIVE}\bluetooth\sdp\ + +LOAD_SUITE T_BTSdpAPI +DELAY 500 + + +// **************************************************************************** +// CSdpAttrValueURL +// **************************************************************************** + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2001 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2001 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Create a CSdpAttrValueURL object +//! Uses API elements: NewURLL() and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueURL object was created successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2001-0001command1NewURLL + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2001 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2002 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2002 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Get the data type of CSdpAttrValueURL +//! Uses API elements: NewURLL(), Type() and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Verify the object type using Type() function. Test pass if expected type is ETypeURL +//! 4. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueURL type is ETypeURL +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2002-0001command1NewURLL + COMMAND csdpattrvalueurl1 Type BTSDP-AttrValURL-PublicApi-2002-0001command2Type + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2002 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2003 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2003 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Get a data buffer attribute value in CSdpAttrValueURL object +//! Uses API elements: NewURLL(), Des() and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Use Des() function to retrieve CSdpAttrValueURL object's data pointer descriptor +//! 4. Read an input data from test data and test pass if the content in data pointer descriptor is as expected +//! 5. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Data buffer attribute value was matched to the expected data from test data successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2003-0001command1NewURLL + COMMAND csdpattrvalueurl1 Des BTSDP-AttrValURL-PublicApi-2003-0001command2Des + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2003 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2004 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2004 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Get the size of a CSdpAttrValueURL attribute +//! Uses API elements: NewURLL(), DataSize() and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Get the size of CSdpAttrValueURL object using DataSize() function +//! 4. Read the expected size from test data and test pass if current size is as expected +//! 5. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Actual object size was matched to the expected size successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2004-0001command1NewURLL + COMMAND csdpattrvalueurl1 DataSize BTSDP-AttrValURL-PublicApi-2004-0001command2DataSize + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2004 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2005 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2005 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Destroy a CSdpAttrValueURL object +//! Uses API elements: NewURLL() and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueURL object was deleted successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2005-0001command1NewURLL + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2005 + + +// **************************************************************************** +// Testing virtual functions inherited from CSdpAttrValue +// **************************************************************************** + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2006 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2006 +//! @SYMAPI CSdpAttrValueURL, CSdpAttrValue and MSdpAttributeValueVisitor +//! @SYMTestCaseDesc Request a call back to pass the attribute value +//! Uses API elements: NewURLL(), AcceptVisitorL(), VisitAttributeValueL() +//! and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Test AcceptVisitorL() function to pass the object itself. Return KErrNone if successed +//! Also check actual attribute types if successful +//! 4. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueURL object type itself returned +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2006-0001command1NewURLL + COMMAND csdpattrvalueurl1 AcceptVisitorL BTSDP-AttrValURL-PublicApi-2006-0001command2AcceptVisitorL + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2006 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2007 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2007 +//! @SYMAPI CSdpAttrValueURL and CSdpAttrValue +//! @SYMTestCaseDesc Call CSdpAttrValue's Bool() function to get a Boolean attribute value +//! Uses API elements: NewURLL() and Bool() +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Call CSdpAttrValue's Bool() function and catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2007-0001command1NewURLL + COMMAND csdpattrvalueurl1 Bool + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2007 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2008 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2008 +//! @SYMAPI CSdpAttrValueURL and CSdpAttrValue +//! @SYMTestCaseDesc Test if CSdpAttrValueURL attribute can be stored in an integer value +//! Uses API elements: NewURLL(), DoesIntFit() and destructor +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Verify that CSdpAttrValueURL object cannot hold integer value using DoesIntFit() function +//! 4. Read an expected result, False from test data and compare results. Test pass if results are matched +//! 5. Delete CSdpAttrValueURL object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueURL attribute cannot be stored in an integer value and EFalse returned +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2008-0001command1NewURLL + COMMAND csdpattrvalueurl1 DoesIntFit BTSDP-AttrValURL-PublicApi-2008-0001command2DoesIntFit + COMMAND csdpattrvalueurl1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2008 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2009 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2009 +//! @SYMAPI CSdpAttrValueURL and CSdpAttrValue +//! @SYMTestCaseDesc Call CSdpAttrValue's Int() function to get a signed integer attribute value +//! Uses API elements: NewURLL() and Int() +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Call CSdpAttrValue's Int() function and catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2009-0001command1NewURLL + COMMAND csdpattrvalueurl1 Int + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2009 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2010 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2010 +//! @SYMAPI CSdpAttrValueURL and CSdpAttrValue +//! @SYMTestCaseDesc Call CSdpAttrValue's UUID() function to get a UUID attribute value +//! Uses API elements: NewURLL() and UUID() +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Call CSdpAttrValue's UUID() function and catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2010-0001command1NewURLL + COMMAND csdpattrvalueurl1 UUID + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2010 + + +START_TESTCASE BTSDP-AttrValURL-PublicApi-2011 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2011 +//! @SYMAPI CSdpAttrValueURL and CSdpAttrValue +//! @SYMTestCaseDesc Call CSdpAttrValue's Uint() function to get an unsigned integer attribute value +//! Uses API elements: NewURLL() and Uint() +//! @SYMTestActions 1. Read a URL value from test data if successful +//! 2. Create a CSdpAttrValueURL object with the URL value using NewURLL() function. +//! Return KErrNone if successed +//! 3. Call CSdpAttrValue's Uint() function and catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 + COMMAND csdpattrvalueurl1 NewURLL BTSDP-AttrValURL-PublicApi-2011-0001command1NewURLL + COMMAND csdpattrvalueurl1 Uint + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValURL-PublicApi-2011 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +//!START_TESTCASE BTSDP-AttrValURL-PublicApi-2012 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2012 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Get the data type of CSdpAttrValueURL +//! Uses API elements: Type() +//! @SYMTestActions 1. Verify the object type using Type() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 +//! COMMAND csdpattrvalueurl1 Type +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValURL-PublicApi-2012 + + +//!START_TESTCASE BTSDP-AttrValURL-PublicApi-2013 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2013 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Get a data buffer attribute value in CSdpAttrValueURL object +//! Uses API elements: Des() +//! @SYMTestActions 1. Use Des() function to retrieve CSdpAttrValueURL object's data pointer descriptor. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 +//! COMMAND csdpattrvalueurl1 Des +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValURL-PublicApi-2013 + + +//!START_TESTCASE BTSDP-AttrValURL-PublicApi-2014 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2014 +//! @SYMAPI CSdpAttrValueURL +//! @SYMTestCaseDesc Get the size of a CSdpAttrValueURL attribute +//! Uses API elements: DataSize() +//! @SYMTestActions 1. Get the size of CSdpAttrValueURL object using DataSize() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 +//! COMMAND csdpattrvalueurl1 DataSize +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValURL-PublicApi-2014 + + +//!START_TESTCASE BTSDP-AttrValURL-PublicApi-2015 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2015 +//! @SYMAPI CSdpAttrValue +//! @SYMTestCaseDesc Request a call back to pass the attribute value +//! Uses API elements: AcceptVisitorL() +//! and destructor +//! @SYMTestActions 1. Test AcceptVisitorL() function to pass the object itself. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 +//! COMMAND csdpattrvalueurl1 AcceptVisitorL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValURL-PublicApi-2015 + + +//!START_TESTCASE BTSDP-AttrValURL-PublicApi-2016 +//! @SYMTestCaseID BTSDP-AttrValURL-PublicApi-2016 +//! @SYMAPI CSdpAttrValue +//! @SYMTestCaseDesc Test if CSdpAttrValueURL attribute can be stored in an integer value +//! Uses API elements: NewURLL(), DoesIntFit() and destructor +//! @SYMTestActions 1. Verify that CSdpAttrValueURL object cannot hold integer value using DoesIntFit() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueURL csdpattrvalueurl1 +//! COMMAND csdpattrvalueurl1 DoesIntFit +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValURL-PublicApi-2016 + + + +// **************************************************************************** +// CSdpSearchPattern +// **************************************************************************** + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2101 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2101 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Create a CSdpSearchPattern object +//! Uses API elements: NewL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpSearchPattern object was created successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2101 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2102 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2102 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Allocate a new UUID array +//! Uses API elements: NewL(), ConstructL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The new UUID array was created successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2102 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2103 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2103 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Add a UID to the list +//! Uses API elements: NewL(), ConstructL(), AddL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 non-existent UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Read the expected values from test data and test pass if the positions are as expected +//! 6. Read an existent UUID from test data if successed +//! 7. Add the existent UUID to the list using AddL() function. Return KErrNone if successed +//! 8. Read the expected value from test data and test pass if the position is as expected +//! 9. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The positions were matched to the expected. In step 4 the 2 UUIDs were inserted to the list, but the UUID in step 7 wasn't +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2103-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2103-0001command4AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2103-0001command5AddL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2103 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2104 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2104 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Remove a UUID from the list +//! Uses API elements: NewL(), ConstructL(), AddL(), Remove() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 3 non-existent UUIDs from test data if successed +//! 4. Add the 3 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Remove an existent UUID from the list using Remove() function +//! 6. Read the expected value from test data and test pass if the position is as expected +//! 7. Remove an non-existent UUID from the list using Remove() function +//! 8. Read the expected value from test data and test pass if the position is as expected +//! 9. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The positions were matched to the expected. In step 5 the UUID was removed, but the UUID in step 7 wasn't +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2104-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2104-0001command4AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2104-0001command5AddL + COMMAND csdpsearchpattern1 Remove BTSDP-SearchPattern-PublicApi-2104-0001command6Remove + COMMAND csdpsearchpattern1 Remove BTSDP-SearchPattern-PublicApi-2104-0001command7Remove + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2104 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2105 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2105 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Get the position of the specified UUID in the list +//! Uses API elements: NewL(), ConstructL(), AddL(), Find() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Get the positions of an existent UUID in the list using Find() function +//! 6. Read the expected values from test data and test pass if the position is as expected and the UUID can be found +//! 7. Get the positions of an non-existent UUID in the list using Find() function +//! 8. Read the expected values from test data and test pass if the position is as expected and the UUID can be found +//! 9. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The positions were matched to the expected. In step 5 the UUID was found, but the UUID in step 7 wasn't +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2105-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2105-0001command4AddL + COMMAND csdpsearchpattern1 Find BTSDP-SearchPattern-PublicApi-2105-0001command5Find + COMMAND csdpsearchpattern1 Find BTSDP-SearchPattern-PublicApi-2105-0001command6Find + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2105 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2106 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2106 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Get the number of UUIDs in the list +//! Uses API elements: NewL(), ConstructL(), AddL(), Count() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Get the number of UUIDs in the list using Count() function +//! 6. Read the expected value from test data and test pass if the number of UUIDs in the list is as expected +//! 7. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The number of UUIDs in the list was matched to the expected +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2106-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2106-0001command4AddL + COMMAND csdpsearchpattern1 Count BTSDP-SearchPattern-PublicApi-2106-0001command5Count + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2106 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2107 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2107 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Get the UUID at the specified position in the list +//! Uses API elements: NewL(), ConstructL(), AddL(), At() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Get the UUID at the specified position in the list using At() function +//! 6. Read the expected value from test data and test pass if the UUID is as expected +//! 7. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The UUID was matched to the expected +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2107-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2107-0001command4AddL + COMMAND csdpsearchpattern1 At BTSDP-SearchPattern-PublicApi-2107-0001command5At + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2107 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2108 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2108 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Remove all UUIDs from the list +//! Uses API elements: NewL(), ConstructL(), AddL(), Reset() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Remove all UUIDs from the list using Reset() function +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults All UUIDs in the list were removed +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2108-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2108-0001command4AddL + COMMAND csdpsearchpattern1 Reset + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2108 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2109 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2109 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Test if the list is empty +//! Uses API elements: NewL(), ConstructL(), AddL(), Reset(), IsEmpty() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Remove all UUIDs from the list using Reset() function +//! 6. Check if the list is empty using IsEmpty() function +//! 7. Read the expected value, True from test data and test pass if result is as expected +//! 8. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The list was empty and result was matched to the expected +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2109-0001command3AddL + COMMAND csdpsearchpattern1 Reset + COMMAND csdpsearchpattern1 IsEmpty BTSDP-SearchPattern-PublicApi-2109-0001command5IsEmpty + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2109 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2110 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2110 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Destroy CSdpSearchPattern object +//! Uses API elements: NewL(), ConstructL(), AddL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpSearchPattern object was deleted +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2110-0001command3AddL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2110-0001command4AddL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2110 + + +// **************************************************************************** +// Testing virtual functions inherited from MSdpElementBuilder +// **************************************************************************** + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2111 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2111 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildBooleanL() function to add a Boolean element +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildBooleanL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add a Boolean element using MSdpElementBuilder's BuildBooleanL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2111-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildBooleanL BTSDP-SearchPattern-PublicApi-2111-0001command4BuildBooleanL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2111 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2112 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2112 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Test MSdpElementBuilder's BuildDEAL() function +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildDEAL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add a Data element alternative using MSdpElementBuilder's BuildDEAL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2112-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildDEAL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2112 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2113 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2113 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildIntL() function to add a signed integer element +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildIntL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add a signed integer element using MSdpElementBuilder's BuildIntL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2113-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildIntL BTSDP-SearchPattern-PublicApi-2113-0001command4BuildIntL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2113 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2114 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2114 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildNilL() function to add a null element +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildNilL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add a null element using MSdpElementBuilder's BuildNilL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2114-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildNilL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2114 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2115 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2115 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildStringL() function to add a Text String element +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildStringL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add a Text String element using MSdpElementBuilder's BuildStringL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2115-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildStringL BTSDP-SearchPattern-PublicApi-2115-0001command4BuildStringL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2115 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2116 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2116 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildURLL() function to add a URL element +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildURLL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add a URL element using MSdpElementBuilder's BuildURLL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2116-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildURLL BTSDP-SearchPattern-PublicApi-2116-0001command4BuildURLL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2116 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2117 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2117 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildUintL() function to add an unsigned integer element +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildUintL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add an unsigned integer element using MSdpElementBuilder's BuildUintL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2117-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildUintL BTSDP-SearchPattern-PublicApi-2117-0001command4BuildUintL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2117 + + +START_TESTCASE BTSDP-SearchPattern-PublicApi-2118 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2118 +//! @SYMAPI CSdpSearchPattern and MSdpElementBuilder +//! @SYMTestCaseDesc Call MSdpElementBuilder's BuildUnknownL() function to add an element of any type +//! Uses API elements: NewL(), ConstructL(), AddL(), BuildUnknownL() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read a non-existent UUIDs from test data if successed +//! 4. Add the UUID to the list using AddL() function. Return KErrNone if successed +//! 5. Add an element of any type using MSdpElementBuilder's BuildUnknownL() function. +//! The error KErrGeneral is expected from this function call +//! 6. Delete CSdpSearchPattern object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Leave the error KErrGeneral +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 + COMMAND csdpsearchpattern1 NewL + COMMAND csdpsearchpattern1 ConstructL + COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2118-0001command3AddL + COMMAND !Error=-2 csdpsearchpattern1 BuildUnknownL BTSDP-SearchPattern-PublicApi-2118-0001command4BuildUnknownL + COMMAND csdpsearchpattern1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-SearchPattern-PublicApi-2118 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2119 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2119 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Get the UUID at the specified position in the list +//! Uses API elements: NewL(), ConstructL(), AddL(), At() and destructor +//! @SYMTestActions 1. Allocate and construct a new CSdpSearchPattern object using NewL() function. +//! Return KErrNone if successed +//! 2. Allocate a new UUID array using ConstructL() function. Return KErrNone if successed +//! 3. Read 2 non-existent UUIDs from test data if successed +//! 4. Add the 2 UUIDs to the list using AddL() function. Return KErrNone if successed +//! 5. Specify the position is equal to the number of objects currently within the list using At() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 NewL +//! COMMAND csdpsearchpattern1 ConstructL +//! COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2119-0001command3AddL +//! COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2119-0001command4AddL +//! COMMAND csdpsearchpattern1 At BTSDP-SearchPattern-PublicApi-2119-0001command5At +//! END_TEST_BLOCK !PanicCode=21 !PanicString=E32USER-CBase + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2119 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2120 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2120 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Allocate a new UUID array +//! Uses API elements: ConstructL() +//! @SYMTestActions 1. Allocate a new UUID array using ConstructL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 ConstructL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2120 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2121 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2121 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Adds a UID to the list +//! Uses API elements: AddL() +//! @SYMTestActions 1. Adds a UID to the list using AddL() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 AddL BTSDP-SearchPattern-PublicApi-2121-0001command1AddL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2121 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2122 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2122 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Removes a UUID from the list +//! Uses API elements: Remove() +//! @SYMTestActions 1. Removes a UUID from the list using Remove() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 Remove BTSDP-SearchPattern-PublicApi-2122-0001command1Remove +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2122 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2123 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2123 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Gets the position of the specified UUID in the list +//! Uses API elements: Find() +//! @SYMTestActions 1. Gets the position of the specified UUID in the list using Find() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 Find BTSDP-SearchPattern-PublicApi-2123-0001command1Find +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2123 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2124 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2124 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Gets the number of UUIDs in the list +//! Uses API elements: Count() +//! @SYMTestActions 1. Gets the number of UUIDs in the list using Count() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 Count +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2124 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2125 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2125 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Removes all UUIDs from the list +//! Uses API elements: Reset() +//! @SYMTestActions 1. Removes all UUIDs from the list using Reset() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 Reset +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2125 + + +//!START_TESTCASE BTSDP-SearchPattern-PublicApi-2126 +//! @SYMTestCaseID BTSDP-SearchPattern-PublicApi-2126 +//! @SYMAPI CSdpSearchPattern +//! @SYMTestCaseDesc Tests if the list is empty +//! Uses API elements: IsEmpty() +//! @SYMTestActions 1. Tests if the list is empty using IsEmpty() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpSearchPattern csdpsearchpattern1 +//! COMMAND csdpsearchpattern1 IsEmpty +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-SearchPattern-PublicApi-2126 + + + +// **************************************************************************** +// SdpUtil +// **************************************************************************** + +START_TESTCASE BTSDP-Util-PublicApi-2201 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2201 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Put an unsigned integer into a descriptor +//! Uses API elements: PutUint() +//! @SYMTestActions 1. Read an integer to be copied into a descriptor and a number of bytes occupied by the integer from test data if successful +//! 2. Put the unsigned integer into a descriptor using PutUint() function +//! 3. Calculate the expected value and test pass if the pointer to the descriptor's data field is as expected +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Pointer to the descriptor's data field was matched to the expected value +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 PutUint BTSDP-Util-PublicApi-2201-0001command1PutUint + END_TEST_BLOCK + +END_TESTCASE BTSDP-Util-PublicApi-2201 + + +START_TESTCASE BTSDP-Util-PublicApi-2202 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2202 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Get an unsigned integer from a descriptor +//! Uses API elements: GetUint() +//! The length of parameter(define in ini file) should be 0, 1, 2 or 4 +//! @SYMTestActions 1. Read a descriptor containing an integer from test data if successful +//! 2. Get an unsigned integer from the descriptor using GetUint() function +//! 3. Calculate the expected value and test pass if the unsigned integer is as expected +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The unsigned integer was matched to the expected value +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 GetUint BTSDP-Util-PublicApi-2202-0001command1GetUint + END_TEST_BLOCK + +END_TESTCASE BTSDP-Util-PublicApi-2202 + + +START_TESTCASE BTSDP-Util-PublicApi-2204 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2204 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Get an unsigned 64 bit integer from a descriptor +//! Uses API elements: GetUint64() +//! The length of parameter(define in ini file) should be 8 +//! @SYMTestActions 1. Read a descriptor containing an unsigned 64 bit integer from test data if successful +//! 2. Get an unsigned 64 bit integer from the descriptor using GetUint64() function +//! 3. Calculate the expected value and test pass if the unsigned 64 bit integer is as expected +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The unsigned 64 bit integer was matched to the expected value +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 GetUint64 BTSDP-Util-PublicApi-2204-0001command1GetUint64 + END_TEST_BLOCK + +END_TESTCASE BTSDP-Util-PublicApi-2204 + + +START_TESTCASE BTSDP-Util-PublicApi-2206 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2206 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Get two unsigned 64 bit integers from a descriptor +//! Uses API elements: GetUint128() +//! The length of parameter(define in ini file) should be 16 +//! @SYMTestActions 1. Read a descriptor containing two unsigned 64 bit integers from test data if successful +//! 2. Get two unsigned 64 bit integers from the descriptor using GetUint128() function +//! 3. Calculate the expected value and test pass if the two unsigned 64 bit integers are as expected +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The two unsigned 64 bit integers were matched to the expected value +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 GetUint128 BTSDP-Util-PublicApi-2206-0001command1GetUint128 + END_TEST_BLOCK + +END_TESTCASE BTSDP-Util-PublicApi-2206 + + +START_TESTCASE BTSDP-Util-PublicApi-2207 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2207 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Get an unsigned integer from a descriptor +//! Uses API elements: GetUint() +//! The length of parameter(define in ini file) should not be 0, 1, 2 or 4 +//! @SYMTestActions 1. Read a descriptor containing an integer from test data if successful +//! 2. Get an unsigned integer from the descriptor using GetUint() function +//! Verify if a panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 GetUint BTSDP-Util-PublicApi-2207-0001command1GetUint + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Parse + +END_TESTCASE BTSDP-Util-PublicApi-2207 + + +START_TESTCASE BTSDP-Util-PublicApi-2208 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2208 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Get an unsigned 64 bit integer from a descriptor +//! Uses API elements: GetUint64() +//! The length of parameter(define in ini file) should not be 8 +//! @SYMTestActions 1. Read a descriptor containing an unsigned 64 bit integer from test data if successful +//! 2. Get an unsigned 64 bit integer from the descriptor using GetUint64() function +//! Verify if a panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 GetUint64 BTSDP-Util-PublicApi-2208-0001command1GetUint64 + END_TEST_BLOCK !PanicCode=3 !PanicString=SDP-Parse + +END_TESTCASE BTSDP-Util-PublicApi-2208 + + +START_TESTCASE BTSDP-Util-PublicApi-2209 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2209 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Get two unsigned 64 bit integers from a descriptor +//! Uses API elements: GetUint128() +//! The length of parameter(define in ini file) should not be 16 +//! @SYMTestActions 1. Read a descriptor containing two unsigned 64 bit integers from test data if successful +//! 2. Get two unsigned 64 bit integers from the descriptor using GetUint128() function +//! Verify if a panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught a panic +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 GetUint128 BTSDP-Util-PublicApi-2209-0001command1GetUint128 + END_TEST_BLOCK !PanicCode=4 !PanicString=SDP-Parse + +END_TESTCASE BTSDP-Util-PublicApi-2209 + + + +// **************************************************************************** +// CElementParser +// **************************************************************************** + +START_TESTCASE BTSDP-ElementParser-PublicApi-2301 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2301 +//! @SYMAPI CElementParser and CSdpAttrValueDEA +//! @SYMTestCaseDesc Create a CElementParser object +//! Uses API elements: NewDEAL(), BuildStringL(), NewL() and destructor +//! @SYMTestActions 1. Create a list using NewDEAL() function and return KErrNone if successed +//! 2. Read a string value from test data if successful +//! 3. Add the string value in the list using BuildStringL() function. Return KErrNone if successed +//! 4. Create a new CElementParser object with the CSdpAttrValueDEA object using NewL() function. +//! Return KErrNone if successed +//! 5. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CElementParser object was created successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDEA attrValueDEA + COMMAND attrValueDEA NewDEAL + COMMAND attrValueDEA BuildStringL BTSDP-ElementParser-PublicApi-2301-0001command3BuildStringL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2301-0001command5NewL + COMMAND celementparser1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2301 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2302 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2302 +//! @SYMAPI CElementParser and CSdpAttrValueDES +//! @SYMTestCaseDesc Reset the parser's buffers to be empty +//! Uses API elements: NewDESL(), BuildNilL(), NewL(), Reset() and destructor +//! @SYMTestActions 1. Create a list using NewDESL() function and return KErrNone if successed +//! 2. Add a NULL type of element using BuildNilL() function. Return KErrNone if successed +//! 3. Create a new CElementParser object with the CSdpAttrValueDES object using NewL() function. +//! Return KErrNone if successed +//! 4. Reset CElementParser object's buffers using Reset() function +//! 5. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CElementParser's buffers was empty +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDES attrValueDES + COMMAND attrValueDES NewDESL + COMMAND attrValueDES BuildNilL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2302-0001command5NewL + COMMAND celementparser1 Reset + COMMAND celementparser1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2302 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2303 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2303 +//! @SYMAPI CElementParser and CSdpAttrValueDES +//! @SYMTestCaseDesc Reset the parser's buffers to be empty, and reset the element builder object used +//! Uses API elements: NewDESL(), BuildBooleanL(), NewL(), Reset() and destructor +//! @SYMTestActions 1. Create a list using NewDESL() function and return KErrNone if successed +//! 2. Read a boolean value from test data if successful +//! 3. Add the boolean in the list using BuildBooleanL() function. Return KErrNone if successed +//! 4. Create a new CElementParser object with the CSdpAttrValueDES object using NewL() function. +//! Return KErrNone if successed +//! 5. Use Reset() function to reset CElementParser object's buffers and the element builder, CSdpAttrValueDES object used +//! 6. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Reset successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDES attrValueDES + COMMAND attrValueDES NewDESL + COMMAND attrValueDES BuildBooleanL BTSDP-ElementParser-PublicApi-2303-0001command3BuildBooleanL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2303-0001command5NewL + COMMAND celementparser1 Reset BTSDP-ElementParser-PublicApi-2303-0001command6Reset + COMMAND celementparser1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2303 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2304 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2304 +//! @SYMAPI CElementParser and CSdpAttrValueDEA +//! @SYMTestCaseDesc Return MSdpElementBuilder object +//! Uses API elements: NewDEAL(), BuildDEAL(), NewL(), Builder() and destructor +//! @SYMTestActions 1. Create a list using NewDEAL() function and return KErrNone if successed +//! 2. Add a data element alternative in the list using BuildDEAL() function. Return KErrNone if successed +//! 3. Create a new CElementParser object with the CSdpAttrValueDEA object using NewL() function. +//! Return KErrNone if successed +//! 4. Call Builder() function +//! 5. Read an expected result from test data and test pass if results are matched +//! 6. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Returned a MSdpElementBuilder object successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDEA attrValueDEA + COMMAND attrValueDEA NewDEAL + COMMAND attrValueDEA BuildDEAL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2304-0001command5NewL + COMMAND celementparser1 Builder BTSDP-ElementParser-PublicApi-2304-0001command6Builder + COMMAND celementparser1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2304 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2305 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2305 +//! @SYMAPI CElementParser and CSdpAttrValueDES +//! @SYMTestCaseDesc Set MSdpElementBuilder +//! Uses API elements: NewDESL(), BuildIntL(), NewL(), SetBuilder() and destructor +//! @SYMTestActions 1. Create a list using NewDESL() function and return KErrNone if successed +//! 2. Read a signed integer from test data if successful +//! 3. Add the signed integer in the list using BuildIntL() function. Return KErrNone if successed +//! 4. Create a new CElementParser object with the CSdpAttrValueDES object using NewL() function. +//! Return KErrNone if successed +//! 5. Call SetBuilder() function to parse CSdpAttrValueDES object +//! 6. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueDES object was set successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDES attrValueDES + COMMAND attrValueDES NewDESL + COMMAND attrValueDES BuildIntL BTSDP-ElementParser-PublicApi-2305-0001command3BuildIntL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2305-0001command5NewL + COMMAND celementparser1 SetBuilder BTSDP-ElementParser-PublicApi-2305-0001command6SetBuilder + COMMAND celementparser1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2305 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2306 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2306 +//! @SYMAPI CElementParser and CSdpAttrValueDEA +//! @SYMTestCaseDesc Parse a data buffer into the currently set MSdpElementBuilder interface +//! Uses API elements: NewDEAL(), BuildUintL(), NewL(), ParseElementsL() and destructor +//! @SYMTestActions 1. Create a list using NewDEAL() function and return KErrNone if successed +//! 2. Read an unsigned integer from test data if successful +//! 3. Add the unsigned integer in the list using BuildUintL() function. Return KErrNone if successed +//! 4. Create a new CElementParser object with the CSdpAttrValueDEA object using NewL() function. +//! Return KErrNone if successed +//! 5. Retrieve some data from an existent file using RFs and RFile objects +//! 6. CElementParser object parses a data buffer is gotten in step 5 and return number of bytes not consumed +//! Return KErrNone if successed +//! 7. Read an expected result from test data and test pass if the number of bytes not consumed is as expected +//! 8. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The number of bytes not consumed was matched to the expected +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDEA attrValueDEA + COMMAND attrValueDEA NewDEAL + COMMAND attrValueDEA BuildUintL BTSDP-ElementParser-PublicApi-2306-0001command3BuildUintL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2306-0001command5NewL + COMMAND celementparser1 ParseElementsL BTSDP-ElementParser-PublicApi-2306-0001command6ParseElementsL + COMMAND celementparser1 Builder BTSDP-ElementParser-PublicApi-2306-0001command7Builder + COMMAND attrValueDEA DataSize BTSDP-ElementParser-PublicApi-2306-0001command9DataSize + COMMAND attrValueDEA ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2306 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2307 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2307 +//! @SYMAPI CElementParser and CSdpAttrValueDEA +//! @SYMTestCaseDesc Parse out some encoded data, with transparent buffering of unparsed data between calls +//! Uses API elements: NewDEAL(), BuildUUIDL(), NewL(), BufferedParseL() and destructor +//! @SYMTestActions 1. Create a list using NewDEAL() function and return KErrNone if successed +//! 2. Read a UUID from test data and add it to the list if successful +//! 3. Add the UUID in the list using BuildUUIDL() function. Return KErrNone if successed +//! 4. Create a new CElementParser object with the CSdpAttrValueDEA object using NewL() function. +//! Return KErrNone if successed +//! 5. Retrieve some data from an existent file using RFs and RFile objects +//! 6. CElementParser object parses an input buffer is gotten in step 5 and return the result +//! Return KErrNone if successed +//! 7. Read an expected result from test data and test pass if the results are matched +//! 8. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Returned True and matched to the expected +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDEA attrValueDEA + COMMAND attrValueDEA NewDEAL + COMMAND attrValueDEA BuildUUIDL BTSDP-ElementParser-PublicApi-2307-0001command3BuildUUIDL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2307-0001command5NewL + COMMAND celementparser1 BufferedParseL BTSDP-ElementParser-PublicApi-2307-0001command6BufferedParseL + COMMAND celementparser1 Builder BTSDP-ElementParser-PublicApi-2307-0001command7Builder + COMMAND attrValueDEA DataSize BTSDP-ElementParser-PublicApi-2307-0001command9DataSize + COMMAND attrValueDEA ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2307 + + +START_TESTCASE BTSDP-ElementParser-PublicApi-2308 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2308 +//! @SYMAPI CElementParser and CSdpAttrValueDES +//! @SYMTestCaseDesc Destroy CElementParser object +//! Uses API elements: NewDESL(), BuildURLL() and NewL() and destructor +//! @SYMTestActions 1. Create a list using NewDESL() function and return KErrNone if successed +//! 2. Read a URL from test data and add it to the list if successful +//! 3. Add the URL in the list using BuildURLL() function. Return KErrNone if successed +//! 4. Create a new CElementParser object with the CSdpAttrValueDES object using NewL() function. +//! Return KErrNone if successed +//! 5. Delete CElementParser object using destructor +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CElementParser object was deleted successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CElementParser celementparser1 + CREATE_OBJECT CSdpAttrValueDES attrValueDES + COMMAND attrValueDES NewDESL + COMMAND attrValueDES BuildURLL BTSDP-ElementParser-PublicApi-2308-0001command3BuildURLL + COMMAND celementparser1 NewL BTSDP-ElementParser-PublicApi-2308-0001command5NewL + COMMAND celementparser1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-ElementParser-PublicApi-2308 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +//!START_TESTCASE BTSDP-ElementParser-PublicApi-2309 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2309 +//! @SYMAPI CElementParser +//! @SYMTestCaseDesc Parse a data buffer into the currently set MSdpElementBuilder interface +//! Uses API elements: ParseElementsL() +//! @SYMTestActions 1. Parses a data buffer into the currently set MSdpElementBuilder interface using ParseElementsL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CElementParser celementparser1 +//! COMMAND celementparser1 ParseElementsL BTSDP-ElementParser-PublicApi-2309-0001command1ParseElementsL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-ElementParser-PublicApi-2309 + + +//!START_TESTCASE BTSDP-ElementParser-PublicApi-2310 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2310 +//! @SYMAPI CElementParser +//! @SYMTestCaseDesc Parse out some encoded data, with transparent buffering of unparsed data between calls +//! Uses API elements: BufferedParseL() +//! @SYMTestActions 1. Parse out some encoded data, with transparent buffering of unparsed data between calls using BufferedParseL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CElementParser celementparser1 +//! COMMAND celementparser1 BufferedParseL BTSDP-ElementParser-PublicApi-2310-0001command1BufferedParseL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-ElementParser-PublicApi-2310 + + +//!START_TESTCASE BTSDP-ElementParser-PublicApi-2311 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2311 +//! @SYMAPI CElementParser +//! @SYMTestCaseDesc Reset the parser's buffers to be empty +//! Uses API elements: Reset() +//! @SYMTestActions 1. Reset CElementParser object's buffers using Reset() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CElementParser celementparser1 +//! COMMAND celementparser1 Reset +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-ElementParser-PublicApi-2311 + + +//!START_TESTCASE BTSDP-ElementParser-PublicApi-2312 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2312 +//! @SYMAPI CElementParser +//! @SYMTestCaseDesc Reset the parser's buffers to be empty, and reset the element builder object used +//! Uses API elements: Reset() +//! @SYMTestActions 1. Use Reset() function to reset CElementParser object's buffers and the element builder, CSdpAttrValueDES object used. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CElementParser celementparser1 +//! CREATE_OBJECT CSdpAttrValueDES attrValueDES +//! COMMAND celementparser1 Reset BTSDP-ElementParser-PublicApi-2312-0001command1Reset +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-ElementParser-PublicApi-2312 + + +//!START_TESTCASE BTSDP-ElementParser-PublicApi-2313 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2313 +//! @SYMAPI CElementParser +//! @SYMTestCaseDesc Return MSdpElementBuilder object +//! Uses API elements: Builder() +//! @SYMTestActions 1. Call Builder() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CElementParser celementparser1 +//! COMMAND celementparser1 Builder +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-ElementParser-PublicApi-2313 + + +//!START_TESTCASE BTSDP-ElementParser-PublicApi-2314 +//! @SYMTestCaseID BTSDP-ElementParser-PublicApi-2314 +//! @SYMAPI CElementParser +//! @SYMTestCaseDesc Set MSdpElementBuilder +//! Uses API elements: SetBuilder() +//! @SYMTestActions 1. Call SetBuilder() function to parse CSdpAttrValueDES object. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CElementParser celementparser1 +//! CREATE_OBJECT CSdpAttrValueDES attrValueDES +//! COMMAND celementparser1 SetBuilder BTSDP-ElementParser-PublicApi-2314-0001command1SetBuilder +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-ElementParser-PublicApi-2314 + + + +// **************************************************************************** +// BTSDP-AttrValueInt +// **************************************************************************** + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3101 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3101 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Allocate and construct a new CSdpAttrValueInt object. +//! Uses API elements: NewIntL() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Deconstruct CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueInt object was created successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3101-0001command1NewIntL + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3101 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3102 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3102 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets the size of the attribute. +//! Uses API elements: NewIntL(), DataSize() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Get the current size of CSdpAttrValueInt object using DataSize() function +//! 4. Read the expected size from test data and compare if actual size is as expected +//! 5. Test failed if sizes doesn't match +//! 6. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Actual object size was matched to the expected size successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3102-0001command1NewIntL + COMMAND attrvalueInt1 DataSize BTSDP-AttrValInt-PublicApi-3102-0001command2DataSize + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3102 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3103 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3103 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets the attribute type. +//! Uses API elements: NewIntL(), Type() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object type using Type() function. Test pass if expected type is ETypeInt. +//! 4. Test failed if type doesn't match. +//! 5. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueInt type is ETypeInt. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3103-0001command1NewIntL + COMMAND attrvalueInt1 Type BTSDP-AttrValInt-PublicApi-3103-0001command2Type + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3103 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3104 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3104 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets the value as a signed integer type. +//! Uses API elements: NewIntL(), Int() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object signed integer value using Int() function. Test pass if expected signed integer value +//! is same as actual signed integer value. +//! 4. Test failed if signed integer value doesn't match. +//! 5. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults Actual signed integer value was matched to the expected value successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT TSdpIntBuf32 attrIntBuf1 + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrIntBuf1 NewIntBuf BTSDP-AttrValInt-PublicApi-3104-0001command1NewIntBuf + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3104-0001command3NewIntL + COMMAND attrvalueInt1 Int BTSDP-AttrValInt-PublicApi-3104-0001command4Int + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3104 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3105 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3105 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Tests if the attribute can be stored in an integer value. +//! Uses API elements: NewIntL(), DoesIntFit() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an integer value using DoesIntFit() function. +//! Test pass if object can be stored in an integer value and return ETrue as expected. +//! 4. Test failed if object can't be stored in an integer value and return EFalse. +//! 5. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Object can be stored in an integer value and return ETrue successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3105-0001command1NewIntL + COMMAND attrvalueInt1 DoesIntFit BTSDP-AttrValInt-PublicApi-3105-0001command2DoesIntFit + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3105 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3106 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3106 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets the value as a data buffer. +//! Uses API elements: NewIntL(), Des() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Use Des() function to retrieve CSdpAttrValueInt object's data pointer descriptor. +//! 4. Read an input integer from test data and compare it with the contents in data pointer descriptor +//! and check if actual integer value is same as expected input integer value. +//! 5. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults Data buffer integer value was matched to the expected integer from test data successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3106-0001command1NewIntL + COMMAND attrvalueInt1 Des BTSDP-AttrValInt-PublicApi-3106-0001command2Des + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3106 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3107 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3107 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets an unsigned integer attribute value. +//! Uses API elements: NewIntL(), Uint() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Execute Uint() function and catch a panic and check if panic is thrown out as expected. +//! 4. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3107-0001command1NewIntL + COMMAND attrvalueInt1 Uint + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3107 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3108 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3108 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets a UUID attribute value. +//! Uses API elements: NewIntL(), UUID() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Execute UUID() function and catch a panic and check if panic is thrown out as expected. +//! 4. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3108-0001command1NewIntL + COMMAND attrvalueInt1 UUID + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3108 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3109 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3109 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Gets a Boolean attribute value. +//! Uses API elements: NewIntL(), Bool() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Execute Bool() function and catch a panic and check if panic is thrown out as expected. +//! 4. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3109-0001command1NewIntL + COMMAND attrvalueInt1 Bool + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3109 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3110 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3110 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Test CSdpAttrValue's AcceptVisitorL() function +//! Uses API elements: NewIntL(), AcceptVisitorL() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Execute AcceptVisitorL() function and return TSdpElementType is ETypeInt, integer value. +//! 4. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The correct TSdpElementType and value were returned successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3110-0001command1NewIntL + COMMAND attrvalueInt1 AcceptVisitorL BTSDP-AttrValInt-PublicApi-3110-0001command2AcceptVisitorL + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3110 + + +// **************************************************************************** +// Negative +// **************************************************************************** + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3111 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3111 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Tests if the attribute can be stored in an positive integer value 64 bits. +//! Uses API elements: NewIntL(), DoesIntFit(), Des() and destructor +//! @SYMTestActions 1. Read an input positive integer 64 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an positive integer value 64 bits using DoesIntFit() function. +//! Test pass if object can not be stored in an integer value 64 bits and return EFalse as expected. +//! 4. Test failed if object can be stored in an positive integer value 64 bits and return ETrue. +//! 7. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Object can not be stored in an positive integer value 64 bits and return EFalse successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3111-0001command1NewIntL + COMMAND attrvalueInt1 DoesIntFit BTSDP-AttrValInt-PublicApi-3111-0001command2DoesIntFit + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3111 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3112 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3112 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Tests if the attribute can be stored in an positive integer value 128 bits. +//! Uses API elements: NewIntL(), DoesIntFit(), Des() and destructor +//! @SYMTestActions 1. Read an input positive integer 128 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an positive integer value 128 bits using DoesIntFit() function. +//! Test pass if object can not be stored in an positive integer value 128 bits and return EFalse as expected. +//! 4. Test failed if object can be stored in an positive integer value 128 bits and return ETrue. +//! 7. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Object can not be stored in an positive integer value 128 bits and return EFalse successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3112-0001command1NewIntL + COMMAND attrvalueInt1 DoesIntFit BTSDP-AttrValInt-PublicApi-3112-0001command2DoesIntFit + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3112 + + +START_TESTCASE BTSDP-AttrValInt-PublicApi-3113 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3113 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Tests if the attribute can be stored in an negative integer value 64 bits. +//! Uses API elements: NewIntL(), DoesIntFit(), Des() and destructor +//! @SYMTestActions 1. Read an input negative integer 64 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an negative integer value 64 bits using DoesIntFit() function. +//! Test pass if object can not be stored in an negative integer value 64 bits and return EFalse as expected. +//! 4. Test failed if object can be stored in an negative integer value 64 bits and return ETrue. +//! 7. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Object can not be stored in an negative integer value 64 bits and return EFalse successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 + COMMAND attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3113-0001command1NewIntL + COMMAND attrvalueInt1 DoesIntFit BTSDP-AttrValInt-PublicApi-3113-0001command2DoesIntFit + COMMAND attrvalueInt1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValInt-PublicApi-3113 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3114 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3114 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Tests if the attribute can be stored in an negative integer value 128 bits. +//! Uses API elements: NewIntL(), DoesIntFit(), Des() and destructor +//! @SYMTestActions 1. Read an input negative integer 128 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an negative integer value 128 bits using DoesIntFit() function. +//! Test pass if object can not be stored in an negative integer value 128 bits and return EFalse as expected. +//! 4. Test failed if object can be stored in an negative integer value 128 bits and return ETrue. +//! 7. Deconstructs CSdpAttrValueInt object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. Object can not be stored in an negative integer value 128 bits and return EFalse successfully. +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND !Error=-6 attrvalueInt1 NewIntL BTSDP-AttrValInt-PublicApi-3114-0001command1NewIntL +//! COMMAND attrvalueInt1 DoesIntFit BTSDP-AttrValInt-PublicApi-3114-0001command2DoesIntFit +//! COMMAND attrvalueInt1 ~ +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3114 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3115 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3115 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Get the attribute type +//! Uses API elements: Type() +//! @SYMTestActions 1. Get the attribute type using Type() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND attrvalueInt1 Type +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3115 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3116 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3116 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Get the size of the attribute +//! Uses API elements: DataSize() +//! @SYMTestActions 1. Get the size of the attribute using DataSize() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND attrvalueInt1 DataSize +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3116 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3117 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3117 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Get the value as a signed integer type +//! Uses API elements: Int() +//! @SYMTestActions 1. Get the value as a signed integer type using Int() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND attrvalueInt1 Int +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3117 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3118 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3118 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Test if the attribute can be stored in an integer value +//! Uses API elements: DoesIntFit() +//! @SYMTestActions 1. Test if the attribute can be stored in an integer value using DoesIntFit() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND attrvalueInt1 DoesIntFit +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3118 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3119 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3119 +//! @SYMAPI CSdpAttrValueInt +//! @SYMTestCaseDesc Get the value as a data buffer +//! Uses API elements: Des() +//! @SYMTestActions 1. Get the value as a data buffer using Des() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND attrvalueInt1 Des +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3119 + + +//!START_TESTCASE BTSDP-AttrValInt-PublicApi-3120 +//! @SYMTestCaseID BTSDP-AttrValInt-PublicApi-3120 +//! @SYMAPI CSdpAttrValue +//! @SYMTestCaseDesc Request a call back to pass the attribute value +//! Uses API elements: AcceptVisitorL() +//! @SYMTestActions 1. Request a call back to pass the attribute value using AcceptVisitorL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueInt attrvalueInt1 +//! COMMAND attrvalueInt1 AcceptVisitorL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValInt-PublicApi-3120 + + + +// **************************************************************************** +// BTSDP-AttrValueUint +// **************************************************************************** + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3201 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3201 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Allocate and construct a new CSdpAttrValueUint object. +//! Uses API elements: NewUintL() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Deconstruct CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueUint object was created successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3201-0001command1NewUintL + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3201 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3202 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3202 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets the size of the attribute. +//! Uses API elements: NewUintL(), DataSize() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Get the current size of CSdpAttrValueUint object using DataSize() function +//! 4. Read the expected size from test data and compare if actual size is as expected +//! 5. Test failed if sizes doesn't match +//! 6. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Actual object size was matched to the expected size successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3202-0001command1NewUintL + COMMAND attrValueUint1 DataSize BTSDP-AttrValUint-PublicApi-3202-0001command2DataSize + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3202 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3203 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3203 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets the attribute type. +//! Uses API elements: NewUintL(), Type() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object type using Type() function. Test pass if expected type is ETypeUint. +//! 4. Test failed if type doesn't match. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults CSdpAttrValueUint type is ETypeUint. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3203-0001command1NewUintL + COMMAND attrValueUint1 Type BTSDP-AttrValUint-PublicApi-3203-0001command2Type + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3203 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3204 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3204 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets the value as a unsigned integer type. +//! Uses API elements: NewUintL(), Uint() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object unsigned integer value using Uint() function. Test pass if expected unsigned integer value +//! is same as actual unsigned integer value. +//! 4. Test failed if unsigned integer value doesn't match. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults Actual unsigned integer value was matched to the expected value successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT TSdpIntBuf32 attrIntBuf1 + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrIntBuf1 NewIntBuf BTSDP-AttrValUint-PublicApi-3204-0001command1NewIntBuf + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3204-0001command3NewUintL + COMMAND attrValueUint1 Des BTSDP-AttrValUint-PublicApi-3204-0001command4Des + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3204-0001command5NewUintL + COMMAND attrValueUint1 Uint BTSDP-AttrValUint-PublicApi-3204-0001command6Uint + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3204 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3205 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3205 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Tests if the attribute can be stored in an integer value. +//! Uses API elements: NewUintL(), DoesIntFit() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an integer value using DoesIntFit() function. +//! Test pass if object can be stored in an integer value and return ETrue as expected. +//! 4. Test failed if object can't be stored in an integer value and return EFalse. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Object can be stored in an integer value and return ETrue successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3205-0001command1NewUintL + COMMAND attrValueUint1 DoesIntFit BTSDP-AttrValUint-PublicApi-3205-0001command2DoesIntFit + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3205 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3206 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3206 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets the value as a data buffer. +//! Uses API elements: NewUintL(), Des() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Use Des() function to retrieve CSdpAttrValueUint object's data pointer descriptor. +//! 4. Read an input integer from test data and compare it with the contents in data pointer descriptor +//! and check if actual integer value is same as expected input integer value. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults Data buffer integer value was matched to the expected integer from test data successfully +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3206-0001command1NewUintL + COMMAND attrValueUint1 Des BTSDP-AttrValUint-PublicApi-3206-0001command2Des + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3206 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3207 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3207 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets an signed integer attribute value. +//! Uses API elements: NewUintL(), Int() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Execute Int() function and catch a panic and check if panic is thrown out as expected. +//! 4. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3207-0001command1NewUintL + COMMAND attrValueUint1 Int + COMMAND attrValueUint1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3207 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3208 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3208 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets a UUID attribute value. +//! Uses API elements: NewUintL(), UUID() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Execute UUID() function and catch a panic and check if panic is thrown out as expected. +//! 4. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3208-0001command1NewUintL + COMMAND attrValueUint1 UUID + COMMAND attrValueUint1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3208 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3209 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3209 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Gets a Boolean attribute value. +//! Uses API elements: NewUintL(), Bool() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Execute Bool() function and catch a panic and check if panic is thrown out as expected. +//! 4. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3209-0001command1NewUintL + COMMAND attrValueUint1 Bool + COMMAND attrValueUint1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Database + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3209 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3210 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3210 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Test CSdpAttrValue's AcceptVisitorL() function +//! Uses API elements: NewUintL(), AcceptVisitorL() and destructor +//! @SYMTestActions 1. Read an input integer from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Execute AcceptVisitorL() function and and return TSdpElementType is ETypeUint, integer value. +//! 4. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The correct TSdpElementType and value were returned successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3210-0001command1NewUintL + COMMAND attrValueUint1 AcceptVisitorL BTSDP-AttrValUint-PublicApi-3210-0001command2AcceptVisitorL + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3210 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3211 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3211 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Tests if the attribute can be stored in an integer value 64 bits. +//! Uses API elements: NewUintL(), DoesIntFit(), Des() and destructor +//! @SYMTestActions 1. Read an input integer 64 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an integer value 64 bits using DoesIntFit() function. +//! Test pass if object can be stored in an integer value 64 bits and return ETrue as expected. +//! 4. Test failed if object can't be stored in an integer value 64 bits and return EFalse. +//! 5. Use Des() function to retrieve CSdpAttrValueUint object's data pointer descriptor. +//! 6. Read an input integer 64 bits from test data and compare it with the contents in data pointer descriptor +//! and check if actual integer value 64 bits is same as expected input integer value 64 bits. +//! 7. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Object can be stored in an integer value 64 bits and return ETrue successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3211-0001command1NewUintL + COMMAND attrValueUint1 DoesIntFit BTSDP-AttrValUint-PublicApi-3211-0001command2DoesIntFit + COMMAND attrValueUint1 Des BTSDP-AttrValUint-PublicApi-3211-0001command3Des + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3211 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3212 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3212 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Tests if the attribute can be stored in an integer value 128 bits. +//! Uses API elements: NewUintL(), DoesIntFit(), Des() and destructor +//! @SYMTestActions 1. Read an input integer 128 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object can be stored in an integer value 128 bits using DoesIntFit() function. +//! Test pass if object can be stored in an integer value 128 bits and return ETrue as expected. +//! 4. Test failed if object can't be stored in an integer value 128 bits and return EFalse. +//! 5. Use Des() function to retrieve CSdpAttrValueUint object's data pointer descriptor. +//! 6. Read an input integer 64 bits from test data and compare it with the contents in data pointer descriptor +//! and check if actual integer value 128 bits is same as expected input integer value 128 bits. +//! 7. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults Object can be stored in an integer value 128 bits and return ETrue successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3212-0001command1NewUintL + COMMAND attrValueUint1 DoesIntFit BTSDP-AttrValUint-PublicApi-3212-0001command2DoesIntFit + COMMAND attrValueUint1 Des BTSDP-AttrValUint-PublicApi-3212-0001command3Des + COMMAND attrValueUint1 ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3212 + + +// **************************************************************************** +// Negative +// **************************************************************************** + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3213 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3213 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Tests if the attribute can be stored in an negative integer value 16 bits. +//! Uses API elements: NewUintL(), Uint() and destructor +//! @SYMTestActions 1. Read an input negative integer 16 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object nagtive integer value using Uint() function. +//! 4. Catch a panic and check if panic is thrown out as expected. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. Object can not be stored in an negative integer value 16 bits. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3213-0001command1NewUintL + COMMAND attrValueUint1 Uint + COMMAND attrValueUint1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Parse + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3213 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3214 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3214 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Tests if the attribute can be stored in an negative integer value 32 bits. +//! Uses API elements: NewUintL(), Uint() and destructor +//! @SYMTestActions 1. Read an input negative integer 32 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object nagtive integer value using Uint() function. +//! 4. Catch a panic and check if panic is thrown out as expected. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. Object can not be stored in an negative integer value 32 bits. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3214-0001command1NewUintL + COMMAND attrValueUint1 Uint + COMMAND attrValueUint1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Parse + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3214 + + +START_TESTCASE BTSDP-AttrValUint-PublicApi-3215 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3215 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Tests if the attribute can be stored in an negative integer value 64 bits. +//! Uses API elements: NewUintL(), Uint() and destructor +//! @SYMTestActions 1. Read an input negative integer 64 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object nagtive integer value using Uint() function. +//! 4. Catch a panic and check if panic is thrown out as expected. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. Object can not be stored in an negative integer value 64 bits. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT CSdpAttrValueUint attrValueUint1 + COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3215-0001command1NewUintL + COMMAND attrValueUint1 Uint + COMMAND attrValueUint1 ~ + END_TEST_BLOCK !PanicCode=0 !PanicString=SDP-Parse + +END_TESTCASE BTSDP-AttrValUint-PublicApi-3215 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3216 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3216 +//! @SYMAPI CSdpAttrValueUint +///! @SYMTestCaseDesc Tests if the attribute can be stored in an negative integer value 128 bits. +//! Uses API elements: NewUintL(), Uint() and destructor +//! @SYMTestActions 1. Read an input negative integer 128 bits from test data if successful. +//! 2. Allocate and construct a new CSdpAttrValueUint object using NewUintL() function and return KErrNone if successed. +//! 3. Verify the object nagtive integer value using Uint() function. +//! 4. Catch a panic and check if panic is thrown out as expected. +//! 5. Deconstructs CSdpAttrValueUint object. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic. Object can not be stored in an negative integer value 128 bits. +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 NewUintL BTSDP-AttrValUint-PublicApi-3216-0001command1NewUintL +//! COMMAND attrValueUint1 Uint +//! COMMAND attrValueUint1 ~ +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3216 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3117 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3117 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Get the attribute type +//! Uses API elements: Type() +//! @SYMTestActions 1. Get the attribute type using Type() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 Type +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3117 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3118 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3118 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Get the size of the attribute +//! Uses API elements: DataSize() +//! @SYMTestActions 1. Get the size of the attribute using DataSize() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 DataSize +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3118 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3119 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3119 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Get the value as a signed integer type +//! Uses API elements: Uint() +//! @SYMTestActions 1. Get the value as a signed integer type using Uint() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 Uint +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3119 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3120 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3120 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Test if the attribute can be stored in an integer value +//! Uses API elements: DoesIntFit() +//! @SYMTestActions 1. Test if the attribute can be stored in an integer value using DoesIntFit() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 DoesIntFit +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3120 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3121 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3121 +//! @SYMAPI CSdpAttrValueUint +//! @SYMTestCaseDesc Get the value as a data buffer +//! Uses API elements: Des() +//! @SYMTestActions 1. Get the value as a data buffer using Des() function. Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 Des +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3121 + + +//!START_TESTCASE BTSDP-AttrValUint-PublicApi-3122 +//! @SYMTestCaseID BTSDP-AttrValUint-PublicApi-3122 +//! @SYMAPI CSdpAttrValue +//! @SYMTestCaseDesc Request a call back to pass the attribute value +//! Uses API elements: AcceptVisitorL() +//! @SYMTestActions 1. Request a call back to pass the attribute value using AcceptVisitorL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT CSdpAttrValueUint attrValueUint1 +//! COMMAND attrValueUint1 AcceptVisitorL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-AttrValUint-PublicApi-3122 + + + +// **************************************************************************** +// BTSDP-Database +// **************************************************************************** + +START_TESTCASE BTSDP-Database-PublicApi-3301 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3301 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Allocate and construct a new RSdpDatabase object. +//! Uses API elements: RSdpDatabase() +//! @SYMTestActions Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults RSdpDatabase object was allocated successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + COMMAND database1 Constructor + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3301 + + +START_TESTCASE BTSDP-Database-PublicApi-3302 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3302 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Connects a client process to the database, then opens a SDP database subsession. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Close the SDP database subsession using Close() function. +//! 4. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults RSdpDatabase object was Opened successfully with subsession. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3302-0001command6Open + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3302 + + +START_TESTCASE BTSDP-Database-PublicApi-3303 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3303 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Creates a new service record, with a single service class, in the SDP database. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Close the SDP database subsession using Close() function. +//! 8. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The service record was created successfully in SDP database. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3303-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3303-0001command7CreateServiceRecordL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3303 + + +START_TESTCASE BTSDP-Database-PublicApi-3304 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3304 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Deletes a service record. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), DeleteRecordL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Deletes the service record using DeleteRecordL() function and return KErrNone if successed. +//! 8. Close the SDP database subsession using Close() function. +//! 9. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The service record was deleted successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3304-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3304-0001command7CreateServiceRecordL + COMMAND database1 DeleteRecordL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3304 + + +START_TESTCASE BTSDP-Database-PublicApi-3305 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3305 +//! @SYMAPI RSdpDatabase, CSdpAttrValueDES +//! @SYMTestCaseDesc Creates a new service record, with multiple service classes, in the SDP database. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), DeleteRecordL() ,Close() and NewDESL() +//! @SYMTestActions 1. Allocate and construct a new CSdpAttrValueDES object using NewDESL() function and return KErrNone if successed. +//! 2. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 3. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 4. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 5. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 6. Read the CSdpAttrValueDES object from test data if successful. +//! 7. Creates a new service record with multiple service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 8. Close the SDP database subsession using Close() function. +//! 9. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The Service record with multiple service classes was created successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + CREATE_OBJECT CSdpAttrValueDES attrValueDES + COMMAND attrValueDES NewDESL + COMMAND attrValueDES BuildUUIDL BTSDP-Database-PublicApi-3305-0001command3BuildUUIDL + COMMAND attrValueDES BuildUUIDL BTSDP-Database-PublicApi-3305-0001command4BuildUUIDL + COMMAND attrValueDES BuildUUIDL BTSDP-Database-PublicApi-3305-0001command5BuildUUIDL + COMMAND attrValueDES BuildUUIDL BTSDP-Database-PublicApi-3305-0001command6BuildUUIDL + COMMAND attrValueDES BuildUUIDL BTSDP-Database-PublicApi-3305-0001command7BuildUUIDL + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3305-0001command13Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3305-0001command14CreateServiceRecordL + COMMAND database1 Close + COMMAND rsdp Close + COMMAND attrValueDES ~ + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3305 + + +START_TESTCASE BTSDP-Database-PublicApi-3306 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3306 +//! @SYMAPI RSdpDatabase, CSdpAttrValueInt +//! @SYMTestCaseDesc Updates a service record attribute with a value encapsulated in a CSdpAttrValue. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL(), NewIntL() and Close() +//! @SYMTestActions 1. Allocate and construct a new CSdpAttrValueInt object using NewIntL() function and return KErrNone if successed. +//! 2. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 3. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 4. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 5. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 6. Read an input service record UUID from test data if successful. +//! 7. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 8. Read an input attribute ID from test data if successful. +//! 9. Read the CSdpAttrValueInt object from test data if successful. +//! 10.Updates a service record attribute with a value encapsulated in a CSdpAttrValueInt using UpdateAttributeL() function and return KErrNone if successed. +//! 11.Close the SDP database subsession using Close() function. +//! 12.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The service record with attribute ID and attribute value encapsulated in the CSdpAttrValueInt was updated successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + CREATE_OBJECT CSdpAttrValueInt attrValueInt + COMMAND attrValueInt NewIntL BTSDP-Database-PublicApi-3306-0001command2NewIntL + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3306-0001command8Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3306-0001command9CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3306-0001command10UpdateAttributeL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3306 + + +START_TESTCASE BTSDP-Database-PublicApi-3307 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3307 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Delete an attribute from a service record. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL(), DeleteAttributeL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Read an input attribute ID from test data if successful. +//! 8. Read a narrow descriptor from test data if successful. +//! 9. Updates a service record attribute with a narrow descriptor using UpdateAttributeL() function and return KErrNone if successed. +//! 10.Delete an attribute from a service record using DeleteAttributeL() function and return KErrNone if successed. +//! 11.Close the SDP database subsession using Close() function. +//! 12.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The attribute on a servie reocrd was deleted successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3307-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3307-0001command7CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3307-0001command8UpdateAttributeL + COMMAND database1 DeleteAttributeL BTSDP-Database-PublicApi-3307-0001command9DeleteAttributeL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3307 + + +START_TESTCASE BTSDP-Database-PublicApi-3308 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3308 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Updates a service record attribute with an integer value. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Read an input attribute ID from test data if successful. +//! 8. Read an integer value from test data if successful. +//! 9. Updates a service record attribute with an integer value using UpdateAttributeL() function and return KErrNone if successed. +//! 10.Close the SDP database subsession using Close() function. +//! 11.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The service record with attribute ID and an integer value was updated successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3308-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3308-0001command7CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3308-0001command8UpdateAttributeL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3308 + + +START_TESTCASE BTSDP-Database-PublicApi-3309 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3309 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Updates a service record attribute with a TDesC8 value. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Read an input attribute ID from test data if successful. +//! 8. Read a narrow descriptor (TDesC8) from test data if successful. +//! 9. Updates a service record attribute with a narrow descriptor (TDesC8) using UpdateAttributeL() function and return KErrNone if successed. +//! 10.Close the SDP database subsession using Close() function. +//! 11.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The service record with attribute ID and a narrow descriptor (TDesC8) was updated successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3309-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3309-0001command7CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3309-0001command8UpdateAttributeL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3309 + + +START_TESTCASE BTSDP-Database-PublicApi-3310 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3310 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Updates a service record attribute with a TDesC16 value. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Read an input attribute ID from test data if successful. +//! 8. Read a narrow descriptor (TDesC16) from test data if successful. +//! 9. Updates a service record attribute with a narrow descriptor (TDesC16) using UpdateAttributeL() function and return KErrNone if successed. +//! 10.Close the SDP database subsession using Close() function. +//! 11.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The service record with attribute ID and a narrow descriptor (TDesC16) was updated successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3310-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3310-0001command7CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3310-0001command8UpdateAttributeL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3310 + + +START_TESTCASE BTSDP-Database-PublicApi-3311 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3311 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Gets the version of the database server. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), Version() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Get the version of the database server using Version() function. Test Pass if expected version name, +//! build number, major number and minor number are same as actual version name, actual build number, +//! major number and minor number. +//! 6. Test fail if version name or build number or major number or minor number is not same as expected. +//! 7. Close the SDP database subsession using Close() function. +//! 8. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The actual Version name, build number, major number and minor number are same as expected successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3311-0001command6Open + COMMAND rsdp Version BTSDP-Database-PublicApi-3311-0001command8Version + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3311 + + +START_TESTCASE BTSDP-Database-PublicApi-3312 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3312 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Starts the counter to keep track of open subsessions. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), ResourceCountMarkStart(), ResourceCountMarkEnd() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Start the counter to keep track of open subsessions using ResourceCountMarkStart() function. +//! 6. Stop the counter using ResourceCountMarkEnd() function. +//! 7. Close the SDP database subsession using Close() function. +//! 8. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The resource counter start successfully and stop successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3312-0001command6Open + COMMAND rsdp ResourceCountMarkStart + COMMAND rsdp ResourceCountMarkEnd + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3312 + + +START_TESTCASE BTSDP-Database-PublicApi-3313 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3313 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Gets the number of open subsessions to the database. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), ResourceCountMarkStart(), ResourceCountMarkEnd(), ResourceCount() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Start the counter to keep track of open subsessions using ResourceCountMarkStart() function. +//! 6. Get the number of open subsessions on the database using ResourceCount() function. Test pass if expected +//! resource counter number is same as actual resource counter number. +//! 7. Test fail if expected resource counter is not same as actual resource counter. +//! 8. Stop the counter using ResourceCountMarkEnd() function. +//! 9. Close the SDP database subsession using Close() function. +//! 10.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The actual resource counter number is same as expected successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3313-0001command6Open + COMMAND rsdp ResourceCountMarkStart + COMMAND rsdp ResourceCount BTSDP-Database-PublicApi-3313-0001command9ResourceCount + COMMAND rsdp ResourceCountMarkEnd + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3313 + +START_TESTCASE BTSDP-Database-PublicApi-3314 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3314 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Multiple records being added to the database, then deleted them from database +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), DeleteRecordL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read Multiple input service record UUIDs from test data if successful. +//! 6. Creates multiple new service records with the service record UUIDs using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Deletes the service records using DeleteRecordL() function and return KErrNone if successed. +//! 8. Close the SDP database subsession using Close() function. +//! 9. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Multiple records being added to the database and deleted successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3314-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3314-0001command7CreateServiceRecordL + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3314-0001command8CreateServiceRecordL + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3314-0001command9CreateServiceRecordL + COMMAND database1 DeleteRecordL + COMMAND database1 DeleteRecordL + COMMAND database1 DeleteRecordL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3314 + + +START_TESTCASE BTSDP-Database-PublicApi-3315 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3315 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Multiple attributes being added to a service record, then updated each attribute with properly value. Finally deleted all attributes. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL(), DeleteAttributeL() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Read multiple attribute IDs from test data if successful. +//! 8. Read multiple values from test data if successful. +//! 9. Updates a service record attribute with values using UpdateAttributeL() function and return KErrNone if successed. +//! 10.Read multiple attribute IDs again from test data if successful. +//! 11.Read multiple values again from test data if successful. +//! 12.Updates multiple service record attributes again with values using UpdateAttributeL() function and return KErrNone if successed. +//! 13.Delete multiple attributes from service record using DeleteAttributeL() function and return KErrNone if successed. +//! 14.Close the SDP database subsession using Close() function. +//! 15.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults Multiple attributes being added to a service reocrd, then updated each attribute successfully. Finally deleted all attribute. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3315-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3315-0001command7CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3315-0001command8UpdateAttributeL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3315-0001command9UpdateAttributeL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3315-0001command10UpdateAttributeL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3315-0001command11UpdateAttributeL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3315-0001command12UpdateAttributeL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3315-0001command13UpdateAttributeL + COMMAND database1 DeleteAttributeL BTSDP-Database-PublicApi-3315-0001command14DeleteAttributeL + COMMAND database1 DeleteAttributeL BTSDP-Database-PublicApi-3315-0001command15DeleteAttributeL + COMMAND database1 DeleteAttributeL BTSDP-Database-PublicApi-3315-0001command16DeleteAttributeL + COMMAND database1 DeleteRecordL + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3315 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +//!START_TESTCASE BTSDP-Database-PublicApi-3316 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3316 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Open a SDP database subsession +//! Uses API elements: Open() +//! @SYMTestActions 1. Open a SDP database subsession using Open() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! CREATE_OBJECT RSdp rsdp +//! COMMAND database1 Open BTSDP-Database-PublicApi-3316-0001command1Open +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3316 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3317 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3317 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Close the SDP database subsession +//! Uses API elements: Close() +//! @SYMTestActions 1. Close the SDP database subsession using Close() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 Close +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3317 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3318 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3318 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Create a new service record, with a single service class, in the SDP database +//! Uses API elements: CreateServiceRecordL() +//! @SYMTestActions 1. Create a new service record, with a single service class, in the SDP database using CreateServiceRecordL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3318-0001command1CreateServiceRecordL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3318 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3319 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3319 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Create a new service record, with multiple service classes, in the SDP database +//! Uses API elements: CreateServiceRecordL() +//! @SYMTestActions 1. Create a new service record, with multiple service classes, in the SDP database using CreateServiceRecordL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! CREATE_OBJECT CSdpAttrValueDES attrValueDES +//! COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3319-0001command1CreateServiceRecordL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3319 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3320 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3320 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Update a service record attribute (value encapsulated in a CSdpAttrValue) +//! Uses API elements: UpdateAttributeL() +//! @SYMTestActions 1. Update a service record attribute (value encapsulated in a CSdpAttrValue) using UpdateAttributeL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! CREATE_OBJECT CSdpAttrValueInt attrValueInt +//! COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3320-0001command1UpdateAttributeL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3320 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3321 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3321 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Update a service record attribute (integer value) +//! Uses API elements: UpdateAttributeL() +//! @SYMTestActions 1. Update a service record attribute (integer value) using UpdateAttributeL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3321-0001command1UpdateAttributeL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3321 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3322 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3322 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Update a service record attribute (narrow descriptor value) +//! Uses API elements: UpdateAttributeL() +//! @SYMTestActions 1. Update a service record attribute (narrow descriptor value) using UpdateAttributeL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3322-0001command1UpdateAttributeL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3322 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3323 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3323 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Update a service record attribute (narrow descriptor value) +//! Uses API elements: UpdateAttributeL() +//! @SYMTestActions 1. Update a service record attribute (narrow descriptor value) using UpdateAttributeL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3323-0001command1UpdateAttributeL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3323 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3324 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3324 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Delete an attribute from a service record +//! Uses API elements: DeleteAttributeL() +//! @SYMTestActions 1. Delete an attribute from a service record using DeleteAttributeL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 DeleteAttributeL BTSDP-Database-PublicApi-3324-0001command1DeleteAttributeL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3324 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3325 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3325 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Delete a service record +//! Uses API elements: DeleteRecordL() +//! @SYMTestActions 1. Delete a service record using DeleteRecordL() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 DeleteRecordL +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3325 + + + +// **************************************************************************** +// BTSDP-Rsdp +// **************************************************************************** + +START_TESTCASE BTSDP-Rsdp-PublicApi-3401 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3401 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Allocate and construct a new RSdp object. +//! Uses API elements: RSdp() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults RSdp object was allocated successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdp rsdp1 + COMMAND rsdp1 Constructor + END_TEST_BLOCK + +END_TESTCASE BTSDP-Rsdp-PublicApi-3401 + + +START_TESTCASE BTSDP-Rsdp-PublicApi-3402 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3402 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Connect a client process to the database. +//! Uses API elements: RSdp(), Connect() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Connect to the database was successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdp rsdp1 + COMMAND rsdp1 Constructor + COMMAND rsdp1 Connect + OUTSTANDING + COMMAND rsdp1 Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Rsdp-PublicApi-3402 + + +START_TESTCASE BTSDP-Rsdp-PublicApi-3403 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3403 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Get the version of the database server. +//! Uses API elements: RSdp(), Connect(), Version() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Get the version of the database server using Version() function. Test Pass if expected version name, +//! build number, major number and minor number are same as actual version name, actual build number, +//! major number and minor number. +//! 4. Test fail if version name or build number or major number or minor number is not same as expected. +//! 5. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The actual Version name, build number, major number and minor number are same as expected successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdp rsdp1 + COMMAND rsdp1 Constructor + COMMAND rsdp1 Connect + OUTSTANDING + COMMAND rsdp1 Version BTSDP-Rsdp-PublicApi-3403-0001command3Version + COMMAND rsdp1 Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Rsdp-PublicApi-3403 + + +START_TESTCASE BTSDP-Rsdp-PublicApi-3404 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3404 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Get the number of open subsessions on the database. +//! Uses API elements: RSdp(), Connect(), ResourceCountMarkStart(), ResourceCountMarkEnd(), ResourceCount() and Close() +//! @SYMTestActions 1. 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Start the counter to keep track of open subsessions using ResourceCountMarkStart() function. +//! 4. Get the number of open subsessions on the database using ResourceCount() function. Test pass if expected +//! resource counter number is same as actual resource counter number. +//! 5. Test fail if expected resource counter is not same as actual resource counter. +//! 6. Stop the counter using ResourceCountMarkEnd() function. +//! 7. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults The actual resource counter number is same as expected successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdp rsdp1 + COMMAND rsdp1 Constructor + COMMAND rsdp1 Connect + OUTSTANDING + COMMAND rsdp1 ResourceCountMarkStart + COMMAND rsdp1 ResourceCount BTSDP-Rsdp-PublicApi-3404-0001command4ResourceCount + COMMAND rsdp1 ResourceCountMarkEnd + COMMAND rsdp1 Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Rsdp-PublicApi-3404 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +//!START_TESTCASE BTSDP-Rsdp-PublicApi-3405 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3405 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Connect a client process to the database. +//! Uses API elements: Connect() +//! @SYMTestActions 1. Connect a client process to the database using Connect() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdp rsdp1 +//! COMMAND rsdp1 Connect +//! OUTSTANDING +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Rsdp-PublicApi-3405 + + +//!START_TESTCASE BTSDP-Rsdp-PublicApi-3406 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3406 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Start the counter to keep track of open subsessions +//! Uses API elements: ResourceCountMarkStart() +//! @SYMTestActions 1. Starts the counter to keep track of open subsessions using ResourceCountMarkStart() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdp rsdp1 +//! COMMAND rsdp1 ResourceCountMarkStart +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Rsdp-PublicApi-3406 + + +//!START_TESTCASE BTSDP-Rsdp-PublicApi-3407 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3407 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Stop the counter to keep track of open subsessions +//! Uses API elements: ResourceCountMarkEnd() +//! @SYMTestActions 1. Stop the counter to keep track of open subsessions using ResourceCountMarkEnd() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdp rsdp1 +//! COMMAND rsdp1 ResourceCountMarkEnd +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Rsdp-PublicApi-3407 + + +//!START_TESTCASE BTSDP-Rsdp-PublicApi-3408 +//! @SYMTestCaseID BTSDP-Rsdp-PublicApi-3408 +//! @SYMAPI RSdp +//! @SYMTestCaseDesc Get the number of open subsessions to the database +//! Uses API elements: ResourceCount() +//! @SYMTestActions 1. Get the number of open subsessions to the database using ResourceCount() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdp rsdp1 +//! COMMAND rsdp1 ResourceCount +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Rsdp-PublicApi-3408 + +START_TESTCASE BTSDP-Util-PublicApi-2203 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2203 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Put an unsigned 64 bit integer into a descriptor +//! Uses API elements: PutUint64() +//! @SYMTestActions 1. Read an unsigned 64 bit integer from test data if successful +//! 2. Put the unsigned 64 bit integer into a descriptor using PutUint64() function +//! 3. Calculate the expected value and test pass if the pointer to the descriptor's data field is as expected +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Pointer to the descriptor's data field was matched to the expected value +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 PutUint64 BTSDP-Util-PublicApi-2203-0001command1PutUint64 + END_TEST_BLOCK + +END_TESTCASE BTSDP-Util-PublicApi-2203 + + +START_TESTCASE BTSDP-Util-PublicApi-2205 +//! @SYMTestCaseID BTSDP-Util-PublicApi-2205 +//! @SYMAPI SdpUtil +//! @SYMTestCaseDesc Put two unsigned 64 bit integers into a descriptor +//! Uses API elements: PutUint128() +//! @SYMTestActions 1. Read a 64 lower bits and a 64 higher bits of a 128 bit integer from test data if successful +//! 2. Put the two unsigned 64 bit integers into a descriptor using PutUint128() function +//! 3. Calculate the expected value and test pass if the pointer to the descriptor's data field is as expected +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Pointer to the descriptor's data field was matched to the expected value +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT SdpUtil sdputil1 + COMMAND sdputil1 PutUint128 BTSDP-Util-PublicApi-2205-0001command1PutUint128 + END_TEST_BLOCK + +END_TESTCASE BTSDP-Util-PublicApi-2205 + + +START_TESTCASE BTSDP-Database-PublicApi-3326 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3326 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Deletes a service record. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), DeleteRecord() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Deletes the service record using DeleteRecord() function and return KErrNone if successed. +//! 8. Close the SDP database subsession using Close() function. +//! 9. Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The service record was deleted successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3326-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3326-0001command7CreateServiceRecordL + COMMAND database1 DeleteRecord + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3326 + + +START_TESTCASE BTSDP-Database-PublicApi-3327 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3327 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Delete an attribute from a service record. +//! Uses API elements: Rsdp(), RSdpDatabase(), Connect(), Open(), CreateServiceRecordL(), UpdateAttributeL(), DeleteAttribute() and Close() +//! @SYMTestActions 1. Allocate and construct a new RSdp object using RSdp() function and return KErrNone if successed. +//! 2. Connect a client process to the database using Connect() function and return KErrNone if successed. +//! 3. Allocate and construct a new RSdpDatabase object using RSdpDatabase() function and return KErrNone if successed. +//! 4. Opens a SDP database subsession using Open() function and return KErrNone if successed. +//! 5. Read an input service record UUID from test data if successful. +//! 6. Creates a new service record with the service record UUID using CreateServiceRecordL() function and return KErrNone if successed. +//! 7. Read an input attribute ID from test data if successful. +//! 8. Read a narrow descriptor from test data if successful. +//! 9. Updates a service record attribute with a narrow descriptor using UpdateAttributeL() function and return KErrNone if successed. +//! 10.Delete an attribute from a service record using DeleteAttribute() function and return KErrNone if successed. +//! 11.Close the SDP database subsession using Close() function. +//! 12.Close the client process using Close() function. +//! @SYMTestStatus Implemented +//! @SYMTestPriority Medium +//! @SYMTestExpectedResults The attribute on a servie reocrd was deleted successfully. +//! @SYMTestType CIT + + START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini + CREATE_OBJECT RSdpDatabase database1 + CREATE_OBJECT RSdp rsdp + COMMAND rsdp Constructor + COMMAND rsdp Connect + OUTSTANDING + COMMAND database1 Constructor + COMMAND database1 Open BTSDP-Database-PublicApi-3327-0001command6Open + COMMAND database1 CreateServiceRecordL BTSDP-Database-PublicApi-3327-0001command7CreateServiceRecordL + COMMAND database1 UpdateAttributeL BTSDP-Database-PublicApi-3327-0001command8UpdateAttributeL + COMMAND database1 DeleteAttribute BTSDP-Database-PublicApi-3327-0001command9DeleteAttribute + COMMAND database1 Close + COMMAND rsdp Close + END_TEST_BLOCK + +END_TESTCASE BTSDP-Database-PublicApi-3327 + + +// **************************************************************************** +// Negative test cases +// **************************************************************************** + +//!START_TESTCASE BTSDP-Database-PublicApi-3328 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3328 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Delete a service record +//! Uses API elements: DeleteRecord() +//! @SYMTestActions 1. Delete a service record using DeleteRecord() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 DeleteRecord +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3328 + + +//!START_TESTCASE BTSDP-Database-PublicApi-3329 +//! @SYMTestCaseID BTSDP-Database-PublicApi-3329 +//! @SYMAPI RSdpDatabase +//! @SYMTestCaseDesc Delete an attribute from a service record +//! Uses API elements: DeleteAttribute() +//! @SYMTestActions 1. Delete an attribute from a service record using DeleteAttribute() function. +//! Catch a panic if panic is thrown out +//! @SYMTestStatus Implemented +//! @SYMTestPriority Low +//! @SYMTestExpectedResults Caught the panic +//! @SYMTestType CIT + +//! START_TEST_BLOCK 10 T_BTSdpAPI \bluetooth\sdp\BTSDP-SearchPattern-PublicApi-Unconnected.ini +//! CREATE_OBJECT RSdpDatabase database1 +//! COMMAND database1 DeleteAttribute BTSDP-Database-PublicApi-3329-0001command1DeleteAttribute +//! END_TEST_BLOCK !PanicCode=3 !PanicString=KERN-EXEC + +//!END_TESTCASE BTSDP-Database-PublicApi-3329 + + + +DELAY 2000