--- a/basebandadaptationplugins/basebandchanneladaptorforc32/c32bca2/src/C32Bca.cpp Tue Aug 31 16:23:08 2010 +0300
+++ b/basebandadaptationplugins/basebandchanneladaptorforc32/c32bca2/src/C32Bca.cpp Wed Sep 01 12:40:21 2010 +0100
@@ -1,4 +1,4 @@
-// Copyright (c) 2004-2010 Nokia Corporation and/or its subsidiary(-ies).
+// Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
@@ -21,12 +21,6 @@
@internalComponent
*/
-
-#include "OstTraceDefinitions.h"
-#ifdef OST_TRACE_COMPILER_IN_USE
-#include "C32BcaTraces.h"
-#endif
-
#include "C32Bca.h"
#include <cdbcols.h>
#include <commsdat_partner.h>
@@ -50,12 +44,14 @@
iPort(aPort)
{
CActiveScheduler::Add(this);
+ __FLOG_OPEN(KC32BcaLogFolder, KC32BcaLogFile); // Connect to the BCA logger
}
/**
C++ destructor */
CCommBase::~CCommBase()
{
+ __FLOG_CLOSE;
}
/**
@@ -177,7 +173,7 @@
void CCommLinkMonitor::Setup(TUint32 aMask)
{
iNotifyChangeSignalMask = aMask;
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CCOMMLINKMONITOR_SETUP1_1, "CommLinkMonitor setup: Notify on signal mask [0x%X]",iNotifyChangeSignalMask);
+ __FLOG_1(_L8("CommLinkMonitor setup: Notify on signal mask [0x%X]"),iNotifyChangeSignalMask);
}
/**
@@ -193,7 +189,7 @@
iSavedSignalState = iPort.Signals(iNotifyChangeSignalMask) & iNotifyChangeSignalMask;
iPort.NotifySignalChange(iStatus, iSignals, iNotifyChangeSignalMask);
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CCOMMLINKMONITOR_NOTIFYLINKDOWN1_1, "CommLinkMonitor::NotifyLinkDown: initial signals: [0x%X]", iSavedSignalState);
+ __FLOG_1(_L8("CommLinkMonitor::NotifyLinkDown: initial signals: [0x%X]"), iSavedSignalState);
SetActive();
}
@@ -203,7 +199,7 @@
*/
void CCommLinkMonitor::RunL()
{
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CCOMMLINKMONITOR_RUNL1_1, "CommLinkMonitor::RunL: Signals changed [0x%X]; new signals [0x%X]", iSignals & (~0x1F), iSignals & 0x1F);
+ __FLOG_2(_L8("CommLinkMonitor::RunL: Signals changed [0x%X]; new signals [0x%X]"), iSignals & (~0x1F), iSignals & 0x1F);
// We report link failure if and only if a monitored line went from high to low.
// Method: mask the saved signals using inverted monitored bits in the signal bitmask,
@@ -224,7 +220,7 @@
Cancels notification request of link failure */
void CCommLinkMonitor::DoCancel()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CCOMMLINKMONITOR_DOCANCEL1_1, "CommLinkMonitor::DoCancel: Cancelling signal change notification.");
+ __FLOG(_L8("CommLinkMonitor::DoCancel: Cancelling signal change notification."));
iPort.NotifySignalChangeCancel();
}
@@ -237,7 +233,8 @@
*/
CC32Bca::CC32Bca()
{
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CTOR1_1, "====== CC32Bca::CC32Bca: Shim BCA for C32 [Vesion: major= %d minor= %d] Constructed. ======", KC32BcaMajorVersionNumber, KC32BcaMinorVersionNumber);
+ __FLOG_OPEN(KC32BcaLogFolder,KC32BcaLogFile);
+ __FLOG_2(_L8("====== CC32Bca::CC32Bca: Shim BCA for C32 [Vesion: major= %d minor= %d] Constructed. ======"), KC32BcaMajorVersionNumber, KC32BcaMinorVersionNumber);
}
/**
@@ -263,7 +260,7 @@
CC32Bca::~CC32Bca()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_DTOR1_1, "CC32Bca::~CC32Bca: releasing resources...");
+ __FLOG(_L8("CC32Bca::~CC32Bca: releasing resources..."));
CloseCommDbConnection();
CloseCommPort(); // Cancels reader / writer / monitor
@@ -275,13 +272,14 @@
delete iWriter;
delete iLinkMonitor; // Note: may have never been created.
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_DTOR1_2, "CC32Bca::~CC32Bca: CC32Bca destroyed.");
+ __FLOG(_L8("CC32Bca::~CC32Bca: CC32Bca destroyed."));
+ __FLOG_CLOSE;
}
/** This method deletes the BCA itself.*/
void CC32Bca::Release()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_RELEASE1_1, "CC32Bca::Release");
+ __FLOG(_L8("CC32Bca::Release"));
delete this;
}
@@ -301,7 +299,7 @@
TRequestStatus* ptrStatus = &aStatus;
if(iCommPortOpen)
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_1, "Warning: C32Bca is already Opened.");
+ __FLOG(_L8("Warning: C32Bca is already Opened."));
User::RequestComplete(ptrStatus,KErrNone);
return;
@@ -322,12 +320,12 @@
// So, we just log a warning.
if(KErrNone == commPortErr && iCommPort.Size() == 0)
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_2, "Warning: Null string read from CommDB. Will try to open Comm Port anyway.");
+ __FLOG(_L8("Warning: Null string read from CommDB. Will try to open Comm Port anyway."));
}
if(KErrNone != commPortErr) // Fatal: we do not have a port name. Can't open RComm.
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_3, "Error: Failed to get C32 PortName from CommDB ");
+ __FLOG(_L8("Error: Failed to get C32 PortName from CommDB "));
CloseCommDbConnection();
User::RequestComplete(ptrStatus, commPortErr);
return;
@@ -340,7 +338,7 @@
if (len1 < KErrNone)
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_4, "** ERROR: No :: (Double Colon) in aChannelId **");
+ __FLOG(_L8("** ERROR: No :: (Double Colon) in aChannelId **"));
User::RequestComplete(ptrStatus, KErrBadName);
return;
}
@@ -371,7 +369,7 @@
{
// We do not use a hardcoded value (e.g. ECUART), because the client code or the environment are
// confused - it is better to fail them, rather than mask their problems.
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_5, "Error: Failed to get CSY name from CommDB ");
+ __FLOG(_L8("Error: Failed to get CSY name from CommDB "));
CloseCommDbConnection();
User::RequestComplete(ptrStatus,getCsyErr);
return;
@@ -401,13 +399,13 @@
TInt ret = iCommServ.Connect();
if(ret)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_6, "Open: C32 Server connection error %d", ret);
+ __FLOG_1(_L8("Open: C32 Server connection error %d"), ret);
User::RequestComplete(ptrStatus,ret);
return;
}
ret = iCommServ.LoadCommModule(iCsyName);
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_7, "Open: CSY module [%S] loaded with error %d", iCsyName, ret);
+ __FLOG_2(_L16("Open: CSY module [%S] loaded with error %d"), &iCsyName, ret);
if(ret)
{
@@ -424,7 +422,7 @@
ret = iComm.Open(iCommServ, iCommPort, ECommShared, iCommRole);
}
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_OPEN1_8, "Open: C32 port [%S] opened with error %d", iCommPort, ret);
+ __FLOG_2(_L16("Open: C32 port [%S] opened with error %d"), &iCommPort, ret);
if(ret)
{
@@ -462,7 +460,7 @@
TRequestStatus* request = &aStatus;
User::RequestComplete(request, KErrNone);
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_SHUTDOWN1_1, "C32Bca::Shutdown: BCA shut down with error %d", KErrNone);
+ __FLOG_1(_L8("C32Bca::Shutdown: BCA shut down with error %d"), KErrNone);
}
/**
@@ -472,7 +470,7 @@
void CC32Bca::Close()
{
CloseCommPort();
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CLOSE1_1, "C32Bca::Close:Close: BCA closed with error %d", KErrNone);
+ __FLOG_1(_L8("C32Bca::Close:Close: BCA closed with error %d"), KErrNone);
}
/**
@@ -527,7 +525,7 @@
void CC32Bca:: CancelRead()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CANCELREAD_1, "CancelRead: Read is cancelled by client.");
+ __FLOG(_L8("CancelRead: Read is cancelled by client."));
iReader->Cancel();
if(iReadRequest != NULL)
@@ -542,7 +540,7 @@
void CC32Bca::CancelWrite()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CANCELWRITE1_1, "CancelWrite: Write is cancelled by client.");
+ __FLOG(_L8("CancelWrite: Write is cancelled by client."));
iWriter->Cancel();
@@ -554,7 +552,7 @@
// Debug dumps:
-#ifdef OST_TRACE_COMPILER_IN_USE
+#ifdef __FLOG_ACTIVE
_LIT8(KLitOptLevelGeneric, "KBcaOptLevelGeneric");
_LIT8(KLitOptLevelExtSerial, "KBcaOptLevelExtSerial");
@@ -639,9 +637,22 @@
return KLitOptNameUnsupported;
}
}
-#endif // OST_TRACE_CATEGORY & OST_TRACE_CATEGORY_DEBUG
+#endif // __FLOG_ACTIVE
+#ifdef __FLOG_ACTIVE
+/**
+Print debug output of the TCommComfig parameters.
+
+@param The configuration whose parameters should be logged.
+*/
+void CC32Bca::LogCommConfig(TCommConfig& c)
+ {
+ __FLOG_5(_L8("Rate[%d] DataBits[%d] StopBits[%d] Parity[%d] Handshake[0x%x]"), c().iRate, c().iDataBits, c().iStopBits, c().iParity, c().iHandshake);
+ __FLOG_4(_L8("ParityError[%d] Fifo[%d] SpecialRate[%d] terminatorCount[%d]"), c().iParityError, c().iFifo, c().iSpecialRate, c().iTerminatorCount);
+ __FLOG_1(_L8("Terminator[0x%x]"), c().iTerminator);
+ }
+#endif // __FLOG_ACTIVE
/**
@@ -655,7 +666,7 @@
void CC32Bca::Ioctl(TRequestStatus& aStatus, TUint aOptLevel, TUint aOptName, TDes8& aOpt)
{
- OstTraceDefExt4(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_1, "Ioctl: Level[%s](0x%X) Name[%s](0x%X).", IoctlOptLevelStr(aOptLevel), aOptLevel, IoctlOptNameStr(aOptName), aOptName);
+ __FLOG_4(_L8("Ioctl: Level[%S](0x%X) Name[%S](0x%X)."), &IoctlOptLevelStr(aOptLevel), aOptLevel, &IoctlOptNameStr(aOptName), aOptName);
aStatus = KRequestPending;
@@ -685,7 +696,7 @@
{
TUint32 tempIapId = *(reinterpret_cast<const TUint32*>(aOpt.Ptr()));
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_2, "Ioctl: IAP ID [%d] specified.",tempIapId);
+ __FLOG_1(_L8("Ioctl: IAP ID [%d] specified."),tempIapId);
if(tempIapId < 1 )
{
@@ -734,15 +745,14 @@
case KSerialConfig:
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_3, "Ioctl: KSerialConfig");
+ __FLOG(_L8("Ioctl: KSerialConfig"));
TCommConfig cfg;
iComm.Config(cfg);
- OstTraceDefExt3(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_4, "Rate[%d] DataBits[%d] StopBits[%d]", cfg().iRate, cfg().iDataBits, cfg().iStopBits);
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_5, "Parity[%d] Handshake[0x%x]", cfg().iParity, cfg().iHandshake);
- OstTraceDefExt4(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_6, "ParityError[%d] Fifo[%d] SpecialRate[%d] terminatorCount[%d]", cfg().iParityError, cfg().iFifo, cfg().iSpecialRate, cfg().iTerminatorCount);
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_7, "Terminator[0x%x]", cfg().iTerminator);
+#ifdef __FLOG_ACTIVE
+ LogCommConfig(cfg);
+#endif // __FLOG_ACTIVE
TPckgBuf<TCommConfig> cfgBuf(cfg);
aOpt.Copy(cfgBuf);
@@ -751,15 +761,13 @@
case KSerialSetConfig:
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_8, "Ioctl: KSerialSetConfig");
+ __FLOG(_L8("Ioctl: KSerialSetConfig"));
TCommConfig cfg(*(reinterpret_cast<const TCommConfig*>(aOpt.Ptr())));
- OstTraceDefExt3(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_9, "Rate[%d] DataBits[%d] StopBits[%d]", cfg().iRate, cfg().iDataBits, cfg().iStopBits);
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_10, "Parity[%d] Handshake[0x%x]", cfg().iParity, cfg().iHandshake);
- OstTraceDefExt4(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_11, "ParityError[%d] Fifo[%d] SpecialRate[%d] terminatorCount[%d]", cfg().iParityError, cfg().iFifo, cfg().iSpecialRate, cfg().iTerminatorCount);
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_12, "Terminator[0x%x]", cfg().iTerminator);
-
+#ifdef __FLOG_ACTIVE
+ LogCommConfig(cfg);
+#endif // __FLOG_ACTIVE
ret = iComm.SetConfig(cfg);
break;
@@ -779,11 +787,11 @@
reinterpret_cast<const TName*>(aOpt.Ptr())
));
iCsyNameOverride = ETrue;
- OstTraceDefExt1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_13, "Ioctl: CSY Name set to [%S]", iCsyName);
+ __FLOG_1(_L8("Ioctl: CSY Name set to [%S]"), &iCsyName);
}
else
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_14, "Ioctl: Warning: Cannot set the CSY name because the Comm Port is already open.");
+ __FLOG(_L8("Ioctl: Warning: Cannot set the CSY name because the Comm Port is already open."));
ret = KErrAlreadyExists;
}
@@ -796,11 +804,11 @@
{
iCommRole = *(reinterpret_cast<const TCommRole*>(aOpt.Ptr()));
iCommRoleOverride = ETrue;
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_15, "Ioctl: Comm Role set to [%d]", iCommRole);
+ __FLOG_1(_L8("Ioctl: Comm Role set to [%d]"), iCommRole);
}
else
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_16, "Ioctl: Warning: Cannot set Comm Role because the Comm Port is already open.");
+ __FLOG(_L8("Ioctl: Warning: Cannot set Comm Role because the Comm Port is already open."));
ret = KErrAlreadyExists;
}
break;
@@ -809,7 +817,7 @@
case KSerialSetTxRxBufferSize:
{
TInt bufSize = *(reinterpret_cast<const TInt*>(aOpt.Ptr()));
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_17, "Ioctl: Setting Rx Tx buffer size to [%d]", bufSize);
+ __FLOG_1(_L8("Ioctl: Setting Rx Tx buffer size to [%d]"), bufSize);
iComm.SetReceiveBufferLength(bufSize);
break;
@@ -830,7 +838,7 @@
else
{
const TSerialSetControlLines& lines = *(reinterpret_cast<const TSerialSetControlLines*>(aOpt.Ptr()));
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_18, "Ioctl: Setting/clearing control lines %x/%x", lines.iSetMask, lines.iClearMask);
+ __FLOG_2(_L8("Ioctl: Setting/clearing control lines %x/%x"), lines.iSetMask, lines.iClearMask);
iComm.SetSignals(lines.iSetMask, lines.iClearMask);
ret = KErrNone;
}
@@ -847,7 +855,7 @@
}
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_IOCTL1_19, "Ioctl completed with error %d", ret);
+ __FLOG_1(_L8("Ioctl completed with error %d"), ret);
TRequestStatus* ptrStatus = &aStatus;
User::RequestComplete(ptrStatus, ret);
@@ -863,7 +871,7 @@
*/
void CC32Bca::MonitorControlLinesL(TUint32 aArgMask)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_MONITORCONTROLLINESL1_1, "Ioctl: argument bitmask = [0x%X] ", aArgMask);
+ __FLOG_1(_L8("Ioctl: argument bitmask = [0x%X] "), aArgMask);
if(iLinkMonitor) // We may have never started...
{
@@ -873,12 +881,12 @@
if(KMonitorOff == aArgMask) // Stop monitoring:
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_MONITORCONTROLLINESL1_2, "MonitorControlLinesL: Stopping Control Lines monitoring.");
+ __FLOG(_L8("MonitorControlLinesL: Stopping Control Lines monitoring."));
// We either never started, or we just cancelled above.
}
else // Start Monitoring, or change the monitored lines.
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_MONITORCONTROLLINESL1_3, "MonitorControlLinesL: Starting to monitor Control Lines.");
+ __FLOG(_L8("MonitorControlLinesL: Starting to monitor Control Lines."));
if(!iLinkMonitor) // We are starting to monitor for the first time
{
@@ -927,7 +935,7 @@
iLinkMonitor->Setup(lineMask);
iLinkMonitor->NotifyLinkDown();
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_MONITORCONTROLLINESL1_4, "MonitorControlLinesL: Control Lines monitoring started.");
+ __FLOG(_L8("MonitorControlLinesL: Control Lines monitoring started."));
}
}
@@ -945,7 +953,7 @@
@leave if the value could not be read */
void CC32Bca::ReadCommPortFromCommDbL(TDes& aPortName)
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_READCOMMPORTFROMCOMMDBL1_1, "CC32Bca::ReadCommPortFromCommDbL()");
+ __FLOG(_L8("CC32Bca::ReadCommPortFromCommDbL()"));
ConnectToCommDbBearerRecordL();
TInt ret(0);
@@ -958,7 +966,7 @@
if(ret!=KErrNone)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_READCOMMPORTFROMCOMMDBL1_2, "portField->LoadL(*iCommsDat) left with[%d] ", ret);
+ __FLOG_1(_L8("portField->LoadL(*iCommsDat) left with[%d] "), ret);
User::Leave(ret);
}
@@ -972,7 +980,7 @@
@leave if the value could not be read */
void CC32Bca::ReadCsyNameFromCommDbL(TDes& aCsyName)
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_READCSYNAMEFROMCOMMDBL1_1, "CC32Bca::ReadCsyNameFromCommDbL()");
+ __FLOG(_L8("CC32Bca::ReadCsyNameFromCommDbL()"));
ConnectToCommDbBearerRecordL();
TInt ret(0);
@@ -985,7 +993,7 @@
if(ret!=KErrNone)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_READCSYNAMEFROMCOMMDBL1_2, "csyField->LoadL(*iCommsDat) left with[%d] ", ret);
+ __FLOG_1(_L8("csyField->LoadL(*iCommsDat) left with[%d] "), ret);
User::Leave(ret);
}
@@ -1000,7 +1008,7 @@
@leave if the value could not be read */
void CC32Bca::ReadCommRoleFromCommDbL(TCommRole& aCommRole)
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_READCOMMROLEFROMCOMMDBL1_1, "CC32Bca::ReadCommRoleFromCommDbL()");
+ __FLOG(_L8("CC32Bca::ReadCommRoleFromCommDbL()"));
ConnectToCommDbBearerRecordL();
TUint32 role(0);
@@ -1013,7 +1021,7 @@
if(ret!=KErrNone)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_READCOMMROLEFROMCOMMDBL1_2, "roleField->LoadL(*iCommsDat) left with[%d] ", ret);
+ __FLOG_1(_L8("roleField->LoadL(*iCommsDat) left with[%d] "), ret);
User::Leave(ret);
}
@@ -1031,7 +1039,7 @@
*/
void CC32Bca::ConnectToCommDbBearerRecordL()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CONNECTTOCOMMDBBEARERRECORDL1_1, "CC32Bca::ConnectToCommDbBearerRecordL()");
+ __FLOG(_L8("CC32Bca::ConnectToCommDbBearerRecordL()"));
if(iCommsDat != NULL) // CommDB is already open, we don't need to do anything
{
return;
@@ -1039,7 +1047,7 @@
if(iIapId < 1) // Can't access CommDB if IAP ID is unknown
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CONNECTTOCOMMDBBEARERRECORDL1_2, "iIapId[%d] is unknown", iIapId);
+ __FLOG_1(_L8("iIapId[%d] is unknown"), iIapId);
User::Leave(KErrNotReady);
}
@@ -1072,7 +1080,7 @@
TRAPD(ret,iapRecord->LoadL(*iCommsDat));
if (ret != KErrNone)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CONNECTTOCOMMDBBEARERRECORDL1_3, "iapRecord->LoadL(*iCommsDat) left with[%d] ", ret);
+ __FLOG_1(_L8("iapRecord->LoadL(*iCommsDat) left with[%d] "), ret);
User::Leave(ret);
}
@@ -1092,7 +1100,7 @@
if(iModemId == 0) // ID not found.
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CONNECTTOCOMMDBBEARERRECORDL1_4, "iModemId[%d] is not found", iModemId);
+ __FLOG_1(_L8("iModemId[%d] is not found"), iModemId);
User::Leave(KErrNotFound);
}
}
@@ -1101,7 +1109,7 @@
/** Cancels an outstanding Ioctl, if any. */
void CC32Bca::CancelIoctl()
{
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CANCELIOCTL1_1, "CancelIoctl(): Ioctl cancel request. No Ioctl to cancel.");
+ __FLOG(_L8("CancelIoctl(): Ioctl cancel request. No Ioctl to cancel."));
}
@@ -1128,7 +1136,7 @@
iCommServ.Close();
iCommPortOpen = EFalse;
}
- OstTraceDef0(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_CLOSECOMMPORT1_1, "CloseCommPort(): Session with C32 & RComm closed.");
+ __FLOG(_L8("CloseCommPort(): Session with C32 & RComm closed."));
}
/**
@@ -1137,7 +1145,7 @@
*/
void C32Bca::Panic(TC32BcaPanic aPanic)
{
- OstTraceDefExt2(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_PANIC1_1, "%S Panic %d", KC32BcaPanic(), aPanic);
+ __FLOG_STATIC2(KC32BcaLogFolder,KC32BcaLogFile,_L8("%S Panic %d"), &KC32BcaPanic(), aPanic);
User::Panic(KC32BcaPanic, aPanic);
}
@@ -1165,7 +1173,7 @@
// Upcall from the link monitor: Link has gone down.
void CC32Bca::CommLinkDown(TInt aErr)
{
- OstTraceDef1(OST_TRACE_CATEGORY_DEBUG, TRACE_INTERNALS, CC32BCA_COMMLINKDOWN1_1, "CommLinkDown: Warning: serial link has gone down with error[%d]. Erroring the outstanding Read & Write.", aErr);
+ __FLOG_1(_L8("CommLinkDown: Warning: serial link has gone down with error[%d]. Erroring the outstanding Read & Write."), aErr);
__ASSERT_DEBUG(KErrNone != aErr, Panic(EGeneralLogicError)); // If KErrNone, use has no way to know that the read has failed.
if(iReader->IsActive())