--- a/wapstack/wapmessageapi/inc/wapmessage.h Tue Aug 31 16:23:08 2010 +0300
+++ /dev/null Thu Jan 01 00:00:00 1970 +0000
@@ -1,900 +0,0 @@
-// Copyright (c) 2001-2010 Nokia Corporation and/or its subsidiary(-ies).
-// All rights reserved.
-// This component and the accompanying materials are made available
-// under the terms of "Eclipse Public License v1.0"
-// which accompanies this distribution, and is available
-// at the URL "http://www.eclipse.org/legal/epl-v10.html".
-//
-// Initial Contributors:
-// Nokia Corporation - initial contribution.
-//
-// Contributors:
-//
-// Description:
-//
-
-#ifndef __WAPMESSAGE_H__
-#define __WAPMESSAGE_H__
-
-
-#include <e32base.h>
-#include <e32std.h>
-#include <in_sock.h>
-
-/**
-* @file
-*
-* The WAP Messaging API.
-*
-* Four interfaces are defined that provide bound and fully-specified versions of WDP and Connectionless Push.
-* An instantiation of each may be obtained using the CreateImplementationL() function, and must be released
-* using Release() when no longer required. Release() causes the instantiation to be deleted.
-*
-* For error codes returned by methods in this API, see <wapmsgerr.h>. Most methods can return a set of general
-* errors, with some returning additional specific errors.
-*
-* @publishedAll
-* @released since v7.0
-*/
-
-/**
-* Defines WAP-related types and error codes.
-*/
-namespace Wap
- {
- // Bearer type definition
- typedef enum
- /** Type definition for an enum defining WAP bearer types. */
- {
- /** All bearers. */
- EAll,
- /** Internet Protocol. */
- EIP,
- /** 7-bit SMS. */
- ESMS7,
- /** 8-bit SMS. */
- ESMS,
- /** 7-bit SMS. The bearers WAPSMS and WAPSMS7 are intended for WAP browsing where
- delivery reports are not required and the validity period is much shorter (5 minutes). */
- EWAPSMS7,
- /** 8-bit SMS. */
- EWAPSMS
- } TBearer;
-
- // Port number definition
- /** A port number. */
- typedef TUint16 TPort;
-
- class TAddressInfo
- /** Encapsulates an interface name and address. */
- {
- public:
- /** Interface name. */
- TName iName;
- /** Interface IP address. */
- TInetAddr iAddress;
- };
- }
-
-
-/**
-* The WSP status type definition.
-* @internalComponent
-*/
-typedef TUint8 TWSPStatus;
-
-/** Bound WDP */
-class CWapBoundDatagramService : public CBase
-/**
-* Sends and receives datagrams over WDP using a specified local port.
-*
-* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
-* of the interface, and then call the interface's virtual functions to access
-* the implementation's services.
-*
-* The use of the plug-in architecture allows different implementations to use
-* different underlying WAP stacks.
-*
-* Functions can return system wide error codes, and also API-specific errors
-* as defined in wapmsgerr.h.
-*
-*/
- {
-public: // creation/deletion
- IMPORT_C static CWapBoundDatagramService* NewL();
- IMPORT_C static CWapBoundDatagramService* NewL(const TUid& aImplementation);
- IMPORT_C virtual ~CWapBoundDatagramService();
-
-public: // API methods
-
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * subsequent incoming datagrams.
- *
- * This overload of Connect() allows an IP address associated with a network
- * interface to be specified. In multihomed systems, this can be used to specify
- * the network interface to which the endpoint should be bound.
- *
- * All CWapBoundDatagramService implementations must automatically close this
- * endpoint upon destruction.
- *
- * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
- * @param aPort The port to listen on. If set to 0, a local port will be chosen
- * for the client's first SendTo()
- * @param aInetAddr The IP address of the network interface that should be used
- * in a multihomed system.
- * @return KErrNone on successful completion, or one of the system error codes
- * on failure.
- */
- virtual TInt Connect(Wap::TBearer aBearer, Wap::TPort aPort,TInetAddr aInetAddr)=0;
-
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * subsequent incoming datagrams.
- *
- * All CWapBoundDatagramService implementations must automatically close this
- * endpoint upon destruction.
- *
- * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
- * @param aPort The port to listen on. If set to 0, a local port will be chosen
- * for the client's first SendTo()
- * @return KErrNone on successful completion, or one of the system error codes
- * on failure.
- */
- virtual TInt Connect(Wap::TBearer aBearer,Wap::TPort aPort)=0;
-
- /** Sends data to a remote endpoint.
- *
- * @param aRemoteHost The address of the remote host to which to send the data.
- * The format of the address is bearer-specific.
- * @param aRemotePort The port on the remote host to which the data will be sent
- * @param aBuffer The data buffer to be sent
- * @param aBearer The bearer to be used, if the bound connection was opened with EAll
- * @return KErrNone on successful completion, or one of the system error codes
- * on failure.
- */
-virtual TInt SendTo(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, const TDesC8& aBuffer, Wap::TBearer aBearer)=0;
-
- /**
- * Waits for a datagram to be received, and discovers the size of buffer required
- * to retrieve it.
- *
- * This asynchronous method waits for a datagram to be received and will then
- * complete allowing the client to discover how large a buffer is needed to retrieve
- * the entire datagram that has been received. A later call to RecvFrom() with
- * a buffer of sufficient size will then allow the client to retrieve the datagram
- * fully.
- *
- * @param aDataSizePckg On completion, the size of data received, in bytes
- * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
- * @return KErrNone on successful completion, or one of the system error codes
- * on failure.
- */
- virtual TInt AwaitRecvDataSize(TPckg<TUint16>& aDataSizePckg, TRequestStatus& aReqStatus)=0;
-
- /**
- * Receives data on a bound port.
- *
- * An asynchronous notification is sent to the client when data arrives.
- *
- * @param aRemoteHost On completion, the bearer-dependent address of the remote
- * host from which the data was received
- * @param aRemotePort On completion, the port on the remote host from which the
- * data was received
- * @param aBuffer A client-allocated data buffer that on completion is filled
- * with data received. Data that overflows the buffer is discarded.
- * @param aTruncated On completion, indicates whether the received datagram was
- * truncated to fit in the client's supplied buffer
- * @param aReqStatus Asynchronous status word, used to notify the client that
- * a datagram was received
- * @param aTimeout An optional millisecond time-out which allows a timed read
- * to be made. If no data is received within the timeout period, the request
- * completes with KErrTimedOut. If a value of 0 is supplied, the timeout is infinite.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt RecvFrom(TDes8& aRemoteHost, Wap::TPort& aRemotePort, TDes8& aBuffer, TBool& aTruncated,
- TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
-
- /**
- * Cancels a previously asynchronous RecvFrom() or AwaitRecvDataSize() request.
- *
- * If a datagram arrives at the local host, it will be discarded.
- *
- */
- virtual void CancelRecv()=0;
-
- /**
- * Gets the local port of this endpoint.
- *
- * This is useful if the port was chosen automatically.
- *
- * @param aPort On return, the port number
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalPort(Wap::TPort& aPort)=0;
-
- /**
- * Gets the local address of this endpoint.
- *
- * @param aLocalHost On return, the address of the local host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0;
-
- /**
- * Gets the bearer on which a received datagram arrived.
- *
- * This is useful when EAll was specified as the bearer in Connect().
- *
- * @param aBearer On return, the bearer
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetBearer(Wap::TBearer& aBearer)=0;
-
- /**
- * Queries the WDP bearer for its maximum datagram size and its nominal datagram size.
- *
- * The nominal size is the size within which a datagram won't have to be split
- * into smaller individual messages and then re-assembled at the other end.
- *
- * The function will fail for a stream connection.
- *
- * @param aMaxSize On return, the maximum datagram size
- * @param aNominalSize On return, the nominal datagram size
- * @return KErrNone on successful completion, or one of the system error codes
- * on failure.
- */
- virtual TInt GetDatagramSizes(TUint16& aMaxSize, TUint16& aNominalSize)=0;
-
-protected: // methods
- IMPORT_C CWapBoundDatagramService();
- IMPORT_C void ConstructL();
-
-private: // attributes
- // D'tor Key identification required for ECOM
- TUid iDtor_ID_Key;
- };
-
-/** Fully-Specified WDP
-*/
-class CWapFullySpecDatagramService : public CBase
-/**
-* Sends and receives datagrams over WDP using a specified local port and a single,
-* named remote host.
-*
-* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
-* of the interface, and then call the interface's virtual functions to access
-* the implementation's services.
-*
-* The use of the plug-in architecture allows different implementations to use
-* different underlying WAP stacks.
-*
-* Functions can return system wide error codes, and also API-specific errors
-* as defined in wapmsgerr.h.
-*/
- {
-public: // creation/deletion
- IMPORT_C static CWapFullySpecDatagramService* NewL();
- IMPORT_C static CWapFullySpecDatagramService* NewL(const TUid& aImplementation);
- IMPORT_C virtual ~CWapFullySpecDatagramService();
-
-public: // API methods
-
- // Connect to the wapstack, opening an endpoint which is to be used only with a single, named remote host.
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * subsequent incoming datagrams.
- *
- * This overload of Connect() allows an IP address associated with a network
- * interface to be specified. In multihomed systems, this can be used to specify
- * the network interface to which the endpoint should be bound.
- *
- * All CWapFullySpecDatagramService implementations must automatically close
- * this endpoint upon destruction.
- *
- * @param aRemoteHost The bearer-dependent address of the remote host with which
- * the data will be exchanged
- * @param aRemotePort The port on the remote host to which data will be sent
- * @param aBearer The bearer to use. EAll cannot be used.
- * @param aInetAddr The IP address of the network interface that should be used
- * in a multihomed system.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TInetAddr aInetAddr)=0;
-
- // Connect to the wapstack, opening an endpoint which is to be used only with a single, named remote host.
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * subsequent incoming datagrams.
- *
- * All CWapFullySpecDatagramService implementations must automatically close
- * this endpoint upon destruction.
- *
- * @param aRemoteHost The bearer-dependent address of the remote host with which
- * the data will be exchanged
- * @param aRemotePort The port on the remote host to which data will be sent
- * @param aBearer The bearer to use. EAll cannot be used.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer)=0;
-
- /**
- * Sends data on a fully-specified connection.
- *
- * @param aBuffer The data buffer to be written over the connection
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Send(const TDesC8& aBuffer)=0;
-
- /**
- * Waits for a datagram to be received, and discover how large a buffer is required
- * to retrieve it.
- *
- * This asynchronous request waits for a datagram to be received and will then
- * complete allowing the client to discover how large a buffer is needed to retrieve
- * the entire datagram that has been received. A later call to Recv() with a
- * buffer of sufficent size will then allow the client to retrieve the datagram
- * fully.
- *
- * @param aDataSizePckg On completion, the size of data received, in bytes
- * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt AwaitRecvDataSize(TPckg<TUint16>& aDataSizePckg, TRequestStatus& aReqStatus)=0;
-
- /**
- * Receives data on a bound port.
- *
- * An asynchronous notification is sent to the client when data arrives.
- *
- * @param aBuffer A client-allocated data buffer that, on completion, is filled
- * with data received. Data that overflows the buffer is discarded.
- * @param aTruncated On completion, indicates whether the received datagram was
- * truncated to fit in the client's supplied buffer
- * @param aReqStatus Asynchronous status word, used to notify the client that
- * a datagram was received
- * @param aTimeout An optional millisecond time-out which allows a timed read
- * to be made. If no data is received within the timeout period, the request
- * completes with KErrTimedOut. If a value of 0 is supplied, the timeout is infinite.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Recv(TDes8& aBuffer, TBool& aTruncated, TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
-
- /**
- * Cancels a previously asynchronous Recv() or AwaitRecvDataSize() request.
- *
- * If a datagram arrives at the local host, it will be discarded.
- *
- */
- virtual void CancelRecv()=0;
-
- /**
- * Gets the local port of this endpoint.
- *
- * This is useful if the port was chosen automatically.
- *
- * @param aPort On return, the port number
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalPort(Wap::TPort& aPort)=0;
-
- /**
- * Gets the local address of this endpoint.
- *
- * @param aLocalHost On return, the address of the local host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0;
-
- /**
- * Queries the WDP bearer for its maximum datagram size and its nominal datagram size.
- *
- * The nominal size is the size within which a datagram won't have to be split
- * into smaller individual messages and then re-assembled at the other end.
- *
- * @param aMaxSize On return, the maximum datagram size
- * @param aNominalSize On return, the nominal datagram size
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetDatagramSizes(TUint16& aMaxSize, TUint16& aNominalSize)=0;
-
-protected: // methods
- IMPORT_C CWapFullySpecDatagramService();
- IMPORT_C void ConstructL();
-
-private: // ECOM
- // D'tor Key identification required for ECOM
- TUid iDtor_ID_Key;
- };
-
-/** Bound Connectionless Push
-*/
-class CWapBoundCLPushService : public CBase
-/**
-* Listens for WAP Push messages from any sender.
-*
-* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
-* of the interface, and then call the interface's virtual functions to access
-* the implementation's services.
-*
-* The use of the plug-in architecture allows different implementations to use
-* different underlying WAP stacks.
-*
-* Functions can return system wide error codes, and also API-specific errors
-* as defined in wapmsgerr.h.
-*
-*/
-{
-public: // creation/deletion
- IMPORT_C static CWapBoundCLPushService* NewL();
- IMPORT_C static CWapBoundCLPushService* NewL(const TUid& aImplementation);
- IMPORT_C virtual ~CWapBoundCLPushService();
-
-public: // API methods
-
-
- // Opens a socket which is to be used to listen for subsequent incoming Push messages from any sender;
- // i.e. it has only been 'bound' to the local address
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * Push messages from any sender.
- *
- * This overload of Connect() allows an IP address associated with a network
- * interface to be specified. In multihomed systems, this can be used to specify
- * the network interface to which the endpoint should be bound.
- *
- * All CWapBoundCLPushService implementations must automatically close this endpoint
- * upon destruction.
- *
- * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
- * @param aPort The port to listen on. If set to 0, a local port will be chosen
- * for the client's first SendTo()
- * @param aSecure Security flag to indicate whether WTLS should be used or not
- * @param aInetAddr The address of the adapter to use
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(Wap::TBearer aBearer, Wap::TPort aPort, TBool aSecure, TInetAddr aInetAddr)=0;
-
-
- // Opens a socket which is to be used to listen for subsequent incoming Push messages from any sender;
- // i.e. it has only been 'bound' to the local address
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * Push messages from any sender.
- *
- * All CWapBoundCLPushService implementations must automatically close this endpoint
- * upon destruction.
- *
- * @param aBearer The bearer to listen on. Use EAll to specify all bearers.
- * @param aPort The port to listen on. If set to 0, a local port will be chosen
- * for the client's first SendTo()
- * @param aSecure Security flag to indicate whether WTLS should be used or not
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(Wap::TBearer aBearer, Wap::TPort aPort, TBool aSecure)=0;
-
- /**
- * Requests an asynchronous notification upon arrival of the next push message
- * on the listening connection.
- *
- * The request completes upon receipt of the message, filling the buffers with
- * as much received data as possible. A return code indicates whether further
- * data remains. The call must be re-issued for subsequent messages or to receive
- * remaining data from a previous push message.
- *
- * @param aPushHeaders A client-allocated buffer that, on completion, is filled
- * with the push message's header data
- * @param aPushBody A client-allocated buffer that, on completion, is filled with
- * the push message's body data
- * @param aPushIdPckg On completion, an integer ID that uniquely specifies the
- * push message
- * @param aReqStatus Asynchonrous status word, used by the service provider to
- * notify the client when a push message has arrived.
- * EMoreData is returned if more pushed data is available.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt AwaitPush(TDes8& aPushHeaders, TDes8& aPushBody, TPckgBuf<TUint8>& aPushIdPckg, TRequestStatus& aReqStatus)=0;
-
- /**
- * Cancels a previous push message request.
- *
- * If a push message arrives, the client will not be notified.
- *
- */
- virtual void CancelAwaitPush()=0;
-
- /**
- * Gets the local port of this endpoint.
- *
- * This is useful if the port was chosen automatically.
- *
- * @param aPort On return, the port number
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalPort(Wap::TPort& aPort)=0;
-
- /**
- * Gets the local address of this endpoint.
- *
- * @param aLocalHost On return, the address of the local host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0;
-
- /**
- * Gets the bearer on which a received datagram arrived.
- *
- * This is useful when EAll was specified as the bearer in Connect().
- *
- * @param aBearer On return, the bearer
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetBearer(Wap::TBearer& aBearer)=0;
-
- /**
- * Gets the address of the remote server.
- *
- * This function cannot be called when there is an outstanding AwaitPush().
- *
- * @param aRemoteHost On return, the address of the remote host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, KErrNotSupported if not implemented,
- * or one of the system error codes on failure.
- */
- virtual TInt GetServerAddress(HBufC8*& aRemoteHost)=0;
-
-protected: // methods
- IMPORT_C CWapBoundCLPushService();
- IMPORT_C void ConstructL();
-
-private: // ECOM
- // D'tor Key identification required for ECOM
- TUid iDtor_ID_Key;
-};
-
-/** Fully-Specified Connectionless Push
-*/
-class CWapFullySpecCLPushService : public CBase
-/**
-* Listens for WAP Push messages from a single, named remote host.
-*
-* The class is an ECom plug-in interface. Clients use NewL() to request an implementation
-* of the interface, and then call the interface's virtual functions to access
-* the implementation's services.
-*
-* The use of the plug-in architecture allows different implementations to use
-* different underlying WAP stacks.
-*
-* Functions can return system wide error codes, and also API-specific errors
-* as defined in wapmsgerr.h.
-*/
-{
-public: // creation/deletion
- IMPORT_C static CWapFullySpecCLPushService* NewL();
- IMPORT_C static CWapFullySpecCLPushService* NewL(const TUid& aImplementation);
- IMPORT_C virtual ~CWapFullySpecCLPushService();
-
-public: // API methods
-
- // Opens a socket which is to be used only with a single, named remote host.
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * Push messages from a specified remote host.
- *
- * This overload of Connect() allows an IP address associated with a network
- * interface to be specified. In multihomed systems, this can be used to specify
- * the network interface to which the endpoint should be bound.
- *
- * All CWapFullySpecCLPushService implementations must automatically close this
- * endpoint upon destruction.
- *
- * @param aRemoteHost The bearer-dependent address of the remote host with which
- * the data will be exchanged
- * @param aRemotePort The port on the remote host to which data will be sent
- * @param aBearer The bearer to listen on. You cannot use EAll.
- * @param aSecure Security flag to indicate whether WTLS should be used or not
- * @param aInetAddr The address of the adapter to use
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TBool aSecure, TInetAddr aInetAddr)=0;
-
- // Opens a socket which is to be used only with a single, named remote host.
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * Push messages from a specified remote host.
- *
- * All CWapFullySpecCLPushService implementations must automatically close this
- * endpoint upon destruction.
- *
- * @param aRemoteHost The bearer-dependent address of the remote host with which
- * the data will be exchanged
- * @param aRemotePort The port on the remote host to which data will be sent
- * @param aBearer The bearer to listen on. You cannot use EAll.
- * @param aSecure Security flag to indicate whether WTLS should be used or not
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TBool aSecure)=0;
-
- /**
- * Requests an asynchronous notification upon arrival of the next push message
- * on the listening connection.
- *
- * The request completes upon receipt of the message, filling the buffers with
- * as much received data as possible. A return code indicates whether further
- * data remains. The call must be re-issued for subsequent messages or to receive
- * remaining data from a previous push message.
- *
- * @param aPushHeaders A client-allocated buffer that, on completion, is filled
- * with the push message's header data
- * @param aPushBody A client-allocated buffer that, on completion, is filled with
- * the push message's body data
- * @param aPushIdPckg On completion, an integer ID that uniquely specifies the
- * push message
- * @param aReqStatus Asynchronous status word, used by the service provider to
- * notify the client when a push message has arrived.
- * EMoreData is returned if more pushed data is available.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt AwaitPush(TDes8& aPushHeaders, TDes8& aPushBody, TPckgBuf<TUint8>& aPushIdPckg, TRequestStatus& aReqStatus)=0;
-
- /**
- * Cancels a previous push message request.
- *
- * If a push message arrives, the client will not be notified.
- *
- */
- virtual void CancelAwaitPush()=0;
-
-
- /**
- * Gets the local port of this endpoint.
- *
- * This is useful if the port was chosen automatically.
- *
- * @param aPort On return, the port number
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalPort(Wap::TPort& aPort)=0; // // (out) the port number
-
-
- /**
- * Gets the local address of this endpoint.
- *
- * @param aLocalHost On return, the address of the local host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0; // // (out) the address of the local host
-
-protected: // methods
- IMPORT_C CWapFullySpecCLPushService();
- IMPORT_C void ConstructL();
-
-private: // ECOM
- // D'tor Key identification required for ECOM
- TUid iDtor_ID_Key;
-};
-
-/** Bound Connectionless WSP
-* @released since v8.0
-*/
-class CWapBoundCLWSPService : public CBase
-{
-public: // creation/deletion
- IMPORT_C static CWapBoundCLWSPService* NewL();
- IMPORT_C static CWapBoundCLWSPService* NewL(const TUid& aImplementation);
- IMPORT_C virtual ~CWapBoundCLWSPService();
-
-public: // API methods
-
- /**
- * Connects to the WAP stack, opening an endpoint that can be used for S-Unit-MethodInvoke and
- * S-Unit-MethodResult primitives.
- *
- * @param aBearer The bearer to listen on (use EAll for all bearers)
- * @param aPort The port to listen on. If set to 0, a local port will be chosen for the
- * client's first MethodInvoke()
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(Wap::TBearer aBearer,Wap::TPort aPort, TBool aSecure)=0;
-
- /**
- * Sends a request to a remote endpoint.
- *
- * @param aBearer The bearer to be used, if the bound connection was opened with EAll
- * @param aRemoteHost The address of the remote host to which to send the request.
- * The format of the address is bearer-specific.
- * @param aRemotePort The port on the remote host to which the request will be sent
- * @param aMethod
- * @param aURI
- * @param aReqHeaders
- * @param aReqBody
- * @param aTransactionId
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt MethodInvoke(Wap::TBearer aBearer, const TDesC8& aRemoteHost, Wap::TPort aRemotePort, TUint aMethod, const TDesC& aURI, const TDesC8& aReqHeaders, const TDesC8& aReqBody, const TUint8 aTransactionId)=0;
-
- /**
- * Waits for a datagram to be received.
- *
- * @param aReqHeaders
- * @param aReqBody
- * @param aTransactionIdPckg
- * @param aWspStatus
- * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
- * @param aTimeout
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt MethodResult(TDes8& aReqHeaders, TDes8& aReqBody, TPckgBuf<TUint8>& aTransactionIdPckg, TWSPStatus& aWspStatus, TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
-
- /**
- * Cancels a previously requested asynchronous MethodResult() notification.
- *
- * If a datagram arrives at the local host, it will be discarded.
- *
- */
- virtual void CancelReq()=0;
-
-
- /**
- * Gets the local port of this endpoint.
- *
- * This is useful if the port was chosen automatically.
- *
- * @param aPort On return, the port number
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalPort(Wap::TPort& aPort)=0; // // (out) the port number
-
- /**
- * Gets the local address of this endpoint.
- *
- * @param aLocalHost On return, the address of the local host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0; // // (out) the address of the local host
-
- /**
- * Gets the bearer on which a received datagram arrived.
- *
- * Useful when EAll was specified in Connect()
- *
- * @param aBearer On return, the bearer
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetBearer(Wap::TBearer& /*aBearer*/)=0;
-
- /**
- * Gets the remote server address.
- *
- * @param aServerAddress On return, the address of the remote server. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetServerAddress(HBufC8*& aServerAddress)=0; // // (out) the address of the remote server
-
-protected: // methods
- IMPORT_C CWapBoundCLWSPService();
- IMPORT_C void ConstructL();
-
-private: // ECOM
- // D'tor Key identification required for ECOM
- TUid iDtor_ID_Key;
-};
-
-/**
-* Fully-Specified Connectionless WSP
-* @released since v8.0
-*/
-class CWapFullySpecCLWSPService : public CBase
-{
-public: // creation/deletion
- IMPORT_C static CWapFullySpecCLWSPService* NewL();
- IMPORT_C static CWapFullySpecCLWSPService* NewL(const TUid& aImplementation);
- IMPORT_C virtual ~CWapFullySpecCLWSPService();
-
-public: // API methods
-
- // Opens a socket which is to be used only with a single, named remote host.
- /**
- * Connects to the WAP stack, opening an endpoint that can be used to listen for
- * Push messages from a specified remote host.
- *
- * All CWapFullySpecCLWSPService implementations must automatically close this
- * endpoint upon destruction.
- *
- * @param aRemoteHost The bearer-dependent address of the remote host with which
- * the data will be exchanged
- * @param aRemotePort The port on the remote host to which data will be sent
- * @param aBearer The bearer to listen on. You cannot use EAll.
- * @param aSecure Security flag to indicate whether WTLS should be used or not
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt Connect(const TDesC8& aRemoteHost, Wap::TPort aRemotePort, Wap::TBearer aBearer, TBool aSecure)=0;
-
- /**
- * Sends a request to a remote endpoint.
- *
- * @param aMethod
- * @param aURI
- * @param aReqHeaders
- * @param aReqBody
- * @param aTransactionId
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt MethodInvoke(TUint aMethod, const TDesC& aURI, const TDesC8& aReqHeaders, const TDesC8& aReqBody, TUint8 aTransactionId)=0;
-
- /**
- * Waits for a datagram to be received
- *
- * @param aReqHeaders
- * @param aReqBody
- * @param aTransactionIdPckg
- * @param aWspStatus
- * @param aReqStatus Asynchonrous status word, used to signal when a data size is known
- * @param aTimeout
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt MethodResult(TDes8& aReqHeaders, TDes8& aReqBody, TPckgBuf<TUint8>& aTransactionIdPckg, TWSPStatus& aWspStatus, TRequestStatus& aReqStatus, TUint32 aTimeout)=0;
-
-
- /**
- * Cancels a previously-requested MethodResult() notification.
- *
- * If a message arrives the client will not be notified.
- *
- */
- virtual void CancelReq()=0;
-
- /**
- * Gets the local port of this endpoint.
- *
- * This is useful if the port was chosen automatically.
- *
- * @param aPort On return, the port number
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalPort(Wap::TPort& aPort)=0; // // (out) the port number
-
- /**
- * Gets the local address of this endpoint.
- *
- * @param aLocalHost On return, the address of the local host. Clients must pass
- * in a reference to a NULL HBufC8 pointer. The function allocates a new HBufC8
- * buffer to hold the address, and passes ownership of the buffer to the client.
- * @return KErrNone on successful completion, or one of the system error codes on failure.
- */
- virtual TInt GetLocalAddress(HBufC8*& aLocalHost)=0; // // (out) the address of the local host
-
-protected: // methods
- IMPORT_C CWapFullySpecCLWSPService();
- IMPORT_C void ConstructL();
-
-private: // ECOM
- // D'tor Key identification required for ECOM
- TUid iDtor_ID_Key;
-};
-
-
-// Utility class for client/implementation use.
-class CWapMessageUtils : public CBase
-/** Utility functions for use with WAP Messaging. */
- {
-public:
- // // Return a list of all the addresses that are available
- IMPORT_C static TInt GetLocalAddressesL(RArray<Wap::TAddressInfo>& aAddressInfo);
- };
-
-
-#endif // __WAPMESSAGE_H__