telephonyserverplugins/multimodetsy/test/Te_LoopBack/Te_LoopBackCDataCallDiffParam.h
// Copyright (c) 1997-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// This file has the class definitions and scripts for the "Data Call with diff.
// speed" Test in the ETel Regression test harness.
// The call scripts are processed and handled by the emulator side of the test via the
// scripting engine. Each line in the script represents an action that the emulator must
// take, either a receive action (which defines an expected string) or a transmit action with the
// ASCII data to be sent. See the description of the scripting language for more information.
//
//
/**
@file
@internalComponent
*/
#ifndef __CDATA_CALL_DIFF_PARAM_H__
#define __CDATA_CALL_DIFF_PARAM_H__
#include "Te_LoopbackTestStepBase.h"
#include "Te_LoopBackScriptEng.h"
//_LIT8(KWriteTestRemoteHangupData,"ABCD\r\n");
//_LIT8(KWriteTestRemoteHangupData2,"EFGH\r\n");
// KCallDiffParamDefVarDelay is the default Variable Delay value when the user did NOT enter a variable
// delay value to be used as a timeout by script processing when the iParam value is set -1 in a
// TScript script whose iCommand is an EWait.
const TInt KCallDiffParamDefVarDelay=15;
// KCallDiffParamMinVarDelay is Minimum Variable Delay value that can be input by the user as the timeout
// by script processing when iParam value is set -1 in a TScript script whose iCommand is an EWait.
const TInt KCallDiffParamMinVarDelay=1;
// KCallDiffParamMaxVarDelay is Maximum Variable Delay value that can be input by the user as the timeout
// by script processing when iParam value is set -1 in a TScript script whose iCommand is an EWait.
const TInt KCallDiffParamMaxVarDelay=45;
// KCallDiffParamMaxDigits is Maximum number of digits allowed to be entered by the operator when
// Variable Delay value that can be input by the user as the timeout by script
// processing when the iParam value is set -1 in a TScript script whose iCommand is an EWait.
const TInt KCallDiffParamMaxDigits=3;
//
// First a Script where everything is in order
//
const struct TScript KCDataCallDiffParamScript[]= {
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeedUnspecified) ;
//*************************************************
{ ERxString, (TText8*)"AT\r", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ EIfRxStringJmp, (TText8*)"AT\r", 1, 0 },
{ ERxString, (TText8*)"AT+FCLASS=?", 0, ERxEvent },
{ ETxString, (TText8*)"0,1,2\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//
// The initialisation string - we don't care what it is
//
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CNMI=,0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"ATS7?", 0, ERxEvent },
{ ETxString, (TText8*)"050\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"ATS0=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGMI", 0, ERxEvent },
{ ETxString, (TText8*)"ERICSSON\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGMM", 0, ERxEvent },
{ ETxString, (TText8*)"1100801\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGMR", 0, ERxEvent },
{ ETxString, (TText8*)"9808261341\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGSN", 0, ERxEvent },
{ ETxString, (TText8*)"520002512954000\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CIMI", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CMGF=?", 0, ERxEvent },
{ ETxString, (TText8*)"+CMGF: (0)\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CMGF=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CPMS=?", 0, ERxEvent },
{ ETxString, (TText8*)"+CPMS: (\"ME\",\"SM\"),(\"ME\",\"SM\")\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CPMS?", 0, ERxEvent },
{ ETxString, (TText8*)"+CPMS: \"SM\",0,15,\"SM\",0,15\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CPBS=?", 0, ERxEvent },
{ ETxString, (TText8*)"+CPBS: (\"ME\",\"SM\")\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CREG=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CREG=2", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CREG=1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CREG?", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CRC=1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+COPS?", 0, ERxEvent },
{ ETxString, (TText8*)"+COPS: 0,0,\"UK VODAFONE\"\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CBC", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CSQ", 0, ERxEvent },
{ ETxString, (TText8*)"+CSQ: 31,99\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGCLASS", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGCLASS", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGQREQ", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGATT", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CNMI=?", 0, ERxEvent },
{ ETxString, (TText8*)"+CNMI: (0-2),(0,1,3),(0),(0),(0,1)\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CBST=?", 0, ERxEvent },
{ ETxString, (TText8*)"+CBST: (0-7,12,14-16,34,36,38,39,43,47-51,65,66,68,70,71,75,79-81),(0,2),(1)\r", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CSCA?", 0, ERxEvent },
{ ETxString, (TText8*)"+CSCA: \"441632960000\",145", 0, ETxEvent|EFailIfTimeOut },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT+CGREG=1", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT*ECAM=1", 0, ERxEvent },
{ ETxString, (TText8*)"ERROR\r", 0, ETxEvent|EFailIfTimeOut },
//
// Initialisation complete.
//*************************************************
// DialDiffDataService(RMobileCall::EServiceUnspecified) ; //44
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServiceDataCircuitAsync) ; //45
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServiceDataCircuitAsyncRdi) ; //46
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,4,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServicePADAsyncUDI) ; //48
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,2,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServicePADAsyncRDI) ; //49
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,6,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServicePacketAccessSyncUDI) ; //50
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,3,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServicePacketAccessSyncRDI) ; //51
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,7,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffDataService(RMobileCall::EServiceDataCircuitSyncRdi) ; //47
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,5,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeedUnspecified) ;
//*************************************************
// Perform the Dial request
//
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the Data Init String
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeedAutobauding) ;
//*************************************************
//
// Initialisation complete.
// Perform the Dial request
//
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=0,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed2400, RMobileCall::EProtocolV22bis) ; //4
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=4,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed2400, RMobileCall::EProtocolV110) ; //5
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=68,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed2400, RMobileCall::EProtocolV120) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=36,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed2400, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=68,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed4800, RMobileCall::EProtocolV32) ; //6
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=6,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed4800, RMobileCall::EProtocolV110) ;//7
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=70,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed4800, RMobileCall::EProtocolV120) ;//8
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=38,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed4800, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=70,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed9600, RMobileCall::EProtocolV32) ; //9
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed9600, RMobileCall::EProtocolV34) ; //10
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=12,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed9600, RMobileCall::EProtocolV110) ;//11
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=71,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed9600, RMobileCall::EProtocolV120) ;//12
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=39,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed9600, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=71,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed14400, RMobileCall::EProtocolV34) ; //13
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=14,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed14400, RMobileCall::EProtocolV110) ; //14
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=75,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed14400, RMobileCall::EProtocolV120) ; //15
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=43,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed14400, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=75,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed19200, RMobileCall::EProtocolV34) ; //16
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=15,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed19200, RMobileCall::EProtocolV110) ;//17
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=79,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed19200, RMobileCall::EProtocolV120) ;//18
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=47,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed19200, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=79,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed28800, RMobileCall::EProtocolV34) ; //19
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=16,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed28800, RMobileCall::EProtocolV110) ; //20
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=80,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed28800, RMobileCall::EProtocolV120) ; //21
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=48,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed28800, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=80,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed38400, RMobileCall::EProtocolV110) ;//22
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=81,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed38400, RMobileCall::EProtocolV120) ;//23
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=49,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed38400, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=81,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed48000, RMobileCall::EProtocolV110) ;//24
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=82,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed48000, RMobileCall::EProtocolV120) ;//25
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=50,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed48000, RMobileCall::EProtocolX31FlagStuffing) ; //6
//*************************************************
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=82,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed56000, RMobileCall::EProtocolV110) ;//34
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=83,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed56000, RMobileCall::EProtocolV120) ;//35
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=51,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed2400, RMobileCall::EProtocolX31FlagStuffing) ; //36
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=83,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed56000, RMobileCall::EProtocolBitTransparent) ;//37
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=115,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffSpeed(RMobileCall::ESpeed64000, RMobileCall::EProtocolBitTransparent) ;//39
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=116,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffQoS(RMobileCall::EQoSUnspecified) ;
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffQoS(RMobileCall::EQoSTransparent) ;
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0,0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffQoS(RMobileCall::EQoSNonTransparent) ;
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0,1", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffQoS(RMobileCall::EQosTransparentPreferred) ;
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0,2", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//*************************************************
// DialDiffQoS(RMobileCall::EQosNonTransparentPreferred) ;
//*************************************************
// Perform the Dial request
{ ERxString, (TText8*)"AT+FCLASS=0", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Note: Run another test where we ERROR this request
{ ERxString, (TText8*)"ATM1L0X4S8=4", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"AT345678901234567890123456789012345678901234567890", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is just another quick "AT", "OK" sequence to check we're still alright
{ ERxString, (TText8*)"AT", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// This is the data call parameters setup command (new for MMTSY since 13/Sep/01)
{ ERxString, (TText8*)"AT+CBST=7,0,3", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
// Issue the dial command and wait for connection
{ ERxString, (TText8*)"ATD+1234", 0, ERxEvent },
// Set signal for connection
{ ESignalMark, NULL, KSignalDCD, 0 },
{ ETxString, (TText8*)"\r\nCONNECT\r\n", 0, ETxEvent|EFailIfTimeOut },
{ ERxString, (TText8*)"+++", 0, ERxEvent },
{ ERxString, (TText8*)"ATH", 0, ERxEvent },
{ ETxStringOK, NULL, 0, ETxEvent|EFailIfTimeOut },
//+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
{ EComplete, NULL, 0, 0 },
};
/**
* This class is used by the client side of the test. It contains the method DriveETelApi
* which is the primary client side method. This class inherits from the CTestBase class.
* All client side test classes must contain these entries.
*/
class CTestDriveDataCallDiffParam : public CTestBase
{
public:
static CTestDriveDataCallDiffParam* NewL(const TScriptList aScriptListEntry,
TInt aVarDelay=0);
// Called by the user interface from the C function PerformTestL.
virtual TInt RunTestL();
protected:
// Called by the CTestBase::StartEmulator method to drive the ETel API.
virtual TInt DriveETelApiL();
private:
CTestDriveDataCallDiffParam(const TScriptList aScriptListEntry, TInt aVarDelay);
void DialDiffSpeedL(RMobileCall::TMobileCallDataSpeed aSpeed,
RMobileCall::TMobileCallDataProtocol aArg=RMobileCall::EProtocolV32) ;
void DialDiffQoSL(RMobileCall::TMobileCallDataQoS aQoS) ;
void DialDiffProtocolL(RMobileCall::TMobileCallDataProtocol aArg);
void DialDiffDataServiceL(RMobileCall::TMobileCallDataService aArg) ;
void Print_RMobileCall_TMobileCallDataSpeed(RMobileCall::TMobileCallDataSpeed& aArg);
void Print_RMobileCall_TMobileCallDataProtocol(RMobileCall::TMobileCallDataProtocol& aArg);
void Print_RMobileCall_TMobileCallDataQoS(RMobileCall::TMobileCallDataQoS& aArg);
void Print_RMobileCall_TMobileCallDataService(RMobileCall::TMobileCallDataService aArg);
TScriptList iScriptListEntry; //< Initialized by the constructor, it records the enumerated
//< script entry number.
TInt iVarDelay; //< Variable delay value to be used as the timeout by the
//< ...script processing when the iParam value is set -1 in
//< ...a TScript script whose iCommand is an EWait.
RMobilePhone iPhone3;
};
/**
* This class is used by the emulator side of the test. It implements several virtual functions
* which are test specific and referenced by other classes. This class inherits from the
* CATScriptEng class. All Emulator side test classes should have this structure.
*/
class CTestDataCallDiffParam : public CATScriptEng
{
public:
static CTestDataCallDiffParam* NewL(const TScript* aScript);
static CTestDataCallDiffParam* NewL(const TScript* aScript, const TInt aVarDelay);
// Called by the scripting engine to implement the EExecuteSpecial Command.
virtual void SpecificAlgorithmL(TInt aParam);
// Called by the scripting engine to end the execution of the script.
virtual void Complete(TInt aError);
// Called by the scripting engine to start the execution of the script.
virtual TInt Start();
private:
CTestDataCallDiffParam(const TScript* aScript);
CTestDataCallDiffParam(const TScript* aScript, const TInt aVarDelay);
void ConstructL();
const TScript* iScript; //< Pointer to the first line in the associated script.
};
#endif