diff -r 1ac40e087278 -r 17af172ffa5f smsprotocols/smsstack/smsprot/Test/TE_Smsprt/te_smsprt_gsmu.script
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/smsprotocols/smsstack/smsprot/Test/TE_Smsprt/te_smsprt_gsmu.script	Thu Aug 19 11:03:36 2010 +0300
@@ -0,0 +1,767 @@
+// Copyright (c) 2004-2010 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+
+RUN_SCRIPT z:\TestData\Scripts\TE_smsprt_setup.script
+
+LOAD_SUITE TE_smsprt -SharedData
+
+//!@file
+
+START_TESTCASE SMS-GSMU-0046
+//!@SYMTestCaseID SMS-GSMU-0046	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Send single 7 bit PDU with TP-SRR status report scheme.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (2)
+//3. Set the scheme to TSmsStatusReportScheme::ETPSRRScheme
+//4. Set Default to zero and set the last segment
+//5. Send the message
+//6. Check request completes with KErrNone 
+//7. Delete the message.
+//8. Unmark the heap
+//!@SYMTestExpectedResults The message is sent successfully and SIMTSY has verified the format and correctness of the PDU - that it contains TP-SRR bit set, PDU = PDU (3).
+RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send7BitTPSRRSchemeSinglePDU
+
+END_TESTCASE SMS-GSMU-0046
+
+START_TESTCASE SMS-GSMU-0047
+//!@SYMTestCaseID SMS-GSMU-0047	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Send single 8 bit PDU with TP-SRR status report scheme.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (3)
+//3. Set the scheme to TSmsStatusReportScheme::ETPSRRScheme
+//4. Set Default to zero and set the last segment
+//5. Send the message
+//6. Check request completes with KErrNone 
+//7. Delete the message.
+//8. Unmark the heap
+//!@SYMTestExpectedResults The message is sent successfully and SIMTSY has verified the format and correctness of the PDU - that it contains TP-SRR bit set, PDU = PDU (803).
+RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send8BitTPSRRSchemeSinglePDU
+
+END_TESTCASE SMS-GSMU-0047
+
+START_TESTCASE SMS-GSMU-0059
+//!@SYMTestCaseID SMS-GSMU-0059	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Send 7 bit multiple PDU message with TP-SRR status report scheme set in all segments.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (4)
+//3. Set default to zero and set scheme TSmsStatusReportScheme::ETPSRRScheme in every segment
+//4. Send the message
+//5. Check request completes KErrNone 
+//6. Delete the message
+//7. Unmark the heap
+//!@SYMTestExpectedResults The message is verified by SimTSY that it contains TP-SRR bit set in every segment which = PDU (29-31).
+RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send7BitTPSRRSchemeMultiplePDU
+
+END_TESTCASE SMS-GSMU-0059
+
+START_TESTCASE SMS-GSMU-0060
+//!@SYMTestCaseID SMS-GSMU-0060	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Send 8 bit multiple PDU message with TP-SRR status report scheme set in all segments.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (4)
+//3. Set default to zero and set scheme TSmsStatusReportScheme::ETPSRRScheme in every segment
+//4. Send the message
+//5. Check request completes KErrNone 
+//6. Delete the message
+//7. Unmark the heap
+//!@SYMTestExpectedResults The message is verified by SimTSY that it contains TP-SRR bit set in every segment which = PDU (829-831).
+RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInAllPDUs z:\testdata\configs\te_statusReportScheme.ini Send8BitTPSRRSchemeMultiplePDU
+
+END_TESTCASE SMS-GSMU-0060
+
+START_TESTCASE SMS-GSMU-0067
+//!@SYMTestCaseID SMS-GSMU-0067
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Send 7 bit multiple PDU message with TP-SRR scheme set in only the last PDU.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (4)
+//3. Set scheme to TSmsStatusReportScheme::ETPSRRScheme and set default to zero.
+//4. Set TP-SRR for last segment only.
+//5. Send the message and check request completes KErrNone 
+//6. Delete the message
+//7. Unmark the heap
+//!@SYMTestExpectedResults The message sent is verified by SimTSY, PDUs = PDU(41-43) that it contains TP-SRR scheme set only in last segment.
+RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInLastPDU z:\testdata\configs\te_statusReportScheme.ini Send7BitTPSRRSchemeLastPDU
+END_TESTCASE SMS-GSMU-0067
+
+
+START_TESTCASE SMS-GSMU-0068
+//!@SYMTestCaseID SMS-GSMU-0068	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Send 8 bit multiple PDU message with TP-SRR scheme set in only the last PDU.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (4)
+//3. Set scheme to TSmsStatusReportScheme::ETPSRRScheme and set default to zero. 
+//4. Use function which sets the last segment.
+//5. Set TP-SRR for last segment only.
+//6. Send the message and check request completes KErrNone 
+//7. Delete the message
+//8. Unmark the heap
+//!@SYMTestExpectedResults The message sent is verified by SimTSY, PDUs = PDU(841-843) that it contains TP-SRR scheme set only in last segment.
+RUN_TEST_STEP  100 TE_smsprt TestSendingTPSRRSchemeInLastPDU z:\testdata\configs\te_statusReportScheme.ini Send8BitTPSRRSchemeLastPDU
+
+// -------------------------------------------------------------------------------------------------------
+END_TESTCASE SMS-GSMU-0068
+
+
+START_TESTCASE SMS-GSMU-0092
+//!@SYMTestCaseID SMS-GSMU-0092	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive a “completed” status report for a TP-SRR scheme in a single 8bit PDU message.    
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report - PDU(103)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending the message. The received status report generates a notification.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini ReceiveStatusReportCompletedSinglePDU
+END_TESTCASE SMS-GSMU-0092
+
+
+START_TESTCASE SMS-GSMU-0093
+//!@SYMTestCaseID SMS-GSMU-0093	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “permanent failure” status report for a TP-SRR scheme in a single 8 bit PDU message.  
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive permanent failure status report - PDU(104)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending the message. The received status report generates a notification.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini ReceiveStatusReportPermanentFailureSinglePDU
+END_TESTCASE SMS-GSMU-0093
+
+
+START_TESTCASE SMS-GSMU-0094
+//!@SYMTestCaseID SMS-GSMU-0094	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “temporary failure” status report and then a “completed” for a TP-SRR scheme in a single 8 bit PDU message.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive temporary failure status report - PDU(105)
+//6. Receive completed status report - PDU(106)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending or after receiving the temporary failure.  However, a notification is generated after receiving the completed status report.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini TemporyFailureCompletedSinglePDU
+END_TESTCASE SMS-GSMU-0094
+
+
+START_TESTCASE SMS-GSMU-0095
+//!@SYMTestCaseID SMS-GSMU-0095	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “temporary failure” status report and then a “permanent failure” for a TP-SRR scheme in a single 8 bit PDU message.  
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with TP-SRR scheme set (1).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive temporary failure status report - PDU(107)
+//6. Receive completed status report - PDU(108)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending or after receiving the temporary failure.  However, a notification is generated after receiving the permanent failure status report.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini TemporyFailurePermanentFailureSinglePDU
+END_TESTCASE SMS-GSMU-0095
+
+
+START_TESTCASE SMS-GSMU-0097
+//!@SYMTestCaseID SMS-GSMU-0097	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “completed” status reports for a multiple 8 bit PDU message with TP-SRR set in every PDU in this order: third,second,first.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and with TP-SRR scheme set in every PDU.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for third PDU - PDU(112)
+//6. Receive completed status report for second PDU - PDU(111)
+//7. Receive completed status report for first PDU - PDU(110)
+//8. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending. The status reports received are logged and a notification is generated on receiving PDU(110).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini MultipeStatusReportsCompletedOrderThirdSecondFirst
+END_TESTCASE SMS-GSMU-0097
+
+
+START_TESTCASE SMS-GSMU-0098
+//!@SYMTestCaseID SMS-GSMU-0098	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “completed” status reports for a multiple 8 bit PDU message with TP-SRR set in every PDU in this order: first, second, third.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and with TP-SRR scheme set in every PDU.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for first PDU - PDU(113)
+//6. Receive completed status report for second PDU - PDU(114)
+//7. Receive completed status report for third PDU - PDU(115)
+//8. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending. The status reports received are logged and a notification is generated on receiving PDU(115).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini MultipeStatusReportsCompletedOrderFirstSecondThird
+END_TESTCASE SMS-GSMU-0098
+
+
+START_TESTCASE SMS-GSMU-0099
+//!@SYMTestCaseID SMS-GSMU-0099	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “completed” and “temporary failure” status reports for a multiple 8 bit PDU message with TP-SRR set in every PDU.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and with TP-SRR scheme set in every PDU.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for first PDU - PDU(116)
+//6. Receive temporary status report for third PDU - PDU(117)
+//7. Receive completed status report for second PDU - PDU(118)
+//8. Receive completed status report for third PDU - PDU(119)
+//9. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending. The status reports received are logged and a notification is only generated on receiving PDU(119).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingTPSRRAllPDU z:\testdata\configs\te_statusReportScheme.ini MultipeStatusReportsTemporyFailureOnThird
+END_TESTCASE SMS-GSMU-0099
+
+
+START_TESTCASE SMS-GSMU-0100
+//!@SYMTestCaseID SMS-GSMU-0100	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “completed” status reports for a multiple 8 bit PDU message with TP-SRR set in last PDU only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and TP-SRR set in last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for last PDU - PDU(120)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending. The status report received is logged and a notification is generated on receiving it.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportCompletedLastOnly
+END_TESTCASE SMS-GSMU-0100
+
+
+START_TESTCASE SMS-GSMU-0101
+//!@SYMTestCaseID SMS-GSMU-0101	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “temporary failure” and “completed” status reports for the last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and TP-SRR set in last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive temporary status report for last PDU - PDU(121)
+//6. Receive completed status report for last PDU - PDU(122)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification is only received on receiving PDU(122).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportTemporaryFailureThenCompletedLastOnly
+END_TESTCASE SMS-GSMU-0101
+
+
+START_TESTCASE SMS-GSMU-0102
+//!@SYMTestCaseID SMS-GSMU-0102	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “permanent failure” status report for the last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and TP-SRR set in last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for last PDU - PDU(123)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn’t received after sending. The status report received is logged and a notification is generated on receiving it.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportPermanentFailureLastPDUOnly
+END_TESTCASE SMS-GSMU-0102
+
+
+START_TESTCASE SMS-GSMU-0103
+//!@SYMTestCaseID SMS-GSMU-0103	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “temporary failure” and “permanent failure” status reports for the last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and TP-SRR set in last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive temporary status report for last PDU - PDU(124)
+//6. Receive permanent failure status report for last PDU - PDU(125)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification is only received on receiving PDU(125).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini SingleStatusReportTemporaryFailureThenPermanentFailureLastOnly
+END_TESTCASE SMS-GSMU-0103
+
+
+START_TESTCASE SMS-GSMU-0104
+//!@SYMTestCaseID SMS-GSMU-0104	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive “completed” status reports for the first and last PDU of a multiple 8 bit PDU message with TP-SRR set in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and TP-SRR set in last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for first PDU - PDU(126)
+//6. Receive completed status report for last PDU - PDU(127)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification is only received on receiving PDU(127).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastTPSRR z:\testdata\configs\te_statusReportScheme.ini CompletedStatusReportForFirstAndThirdPDUSetForLastOnly
+END_TESTCASE SMS-GSMU-0104
+
+
+START_TESTCASE SMS-GSMU-0107
+//!@SYMTestCaseID SMS-GSMU-0107	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive a "completed" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "completed" status report - PDU(131)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn't received after sending the message. The received status report generates a notification.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceiveStatusReportForSinglePDUSMSCLastPDU
+END_TESTCASE SMS-GSMU-0107
+
+
+START_TESTCASE SMS-GSMU-0108
+//!@SYMTestCaseID SMS-GSMU-0108	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive a "permanent failure" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "permanent failure" status report - PDU(132)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn't received after sending the message. The received status report generates a notification.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceivePermanentFailureStatusReportSinglePDUSMSCLastPDU
+END_TESTCASE SMS-GSMU-0108
+
+
+START_TESTCASE SMS-GSMU-0109
+//!@SYMTestCaseID SMS-GSMU-0109	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive a "temporary failure" and a "permanent failure" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "temporary failure" status report - PDU(133)
+//6. Receive "permanent failure" status report - PDU(134)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification isn't received after sending or after receiving the status report PDU(133).  A notification is generated on receiving PDU(134)
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceiveTemporyFailurePermanentFailureStatusReportSinglePDUSMSCScheme
+END_TESTCASE SMS-GSMU-0109
+
+
+START_TESTCASE SMS-GSMU-0110
+//!@SYMTestCaseID SMS-GSMU-0110	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//1@SYMTestCaseDesc Receive a "temporary failure" and a "completed" status report for a SMSC scheme in a single 8bit PDU message set with value 0x01.    
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (3) and with SMSC scheme with value 0x01.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "temporary failure" status report - PDU(135)
+//6. Receive "completed" status report - PDU(136)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification is only generated on receiving PDU(136)
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini ReceiveTemporyFailureCompletedStatusReportSinglePDUSMSCScheme
+END_TESTCASE SMS-GSMU-0110
+
+
+START_TESTCASE SMS-GSMU-0112
+//!@SYMTestCaseID SMS-GSMU-0112	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive "completed" status reports for a multiple 8 bit PDU message with SMSC set in every PDU (0x01) in this order: third,second,first.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and with SMSC scheme set (0x01) and in every PDU.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive completed status report for third PDU - PDU(140)
+//6. Receive completed status report for second PDU - PDU(141)
+//7. Receive completed status report for first PDU - PDU(142)
+//8. Unmark the heap
+//!@SYMTestExpectedResults A notification isn't received after sending. The status reports received are logged and a notification is generated on receiving PDU(142).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCAllPDUs z:\testdata\configs\te_statusReportScheme.ini MultipeCompletedStatusReportsSMSCScheme
+END_TESTCASE SMS-GSMU-0112
+
+
+START_TESTCASE SMS-GSMU-0114
+//!@SYMTestCaseID SMS-GSMU-0114	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive "completed" and "temporary failure" status reports for a multiple 8 bit PDU message with SMSC set in every PDU (0x01) in this order: second, third, first.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and with SMSC scheme set (0x01) and in every PDU.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "completed" status report for second PDU - PDU(146)
+//6. Receive "temporary failure" status report for third PDU - PDU(147)
+//7. Receive "completed" status report for first PDU - PDU(148)
+//8. Receive "completed" status report for third PDU - PDU(149)
+//9. Unmark the heap
+//!@SYMTestExpectedResults A notification isn't received after sending. The status reports received are logged and a notification is generated on receiving PDU(149).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCAllPDUs z:\testdata\configs\te_statusReportScheme.ini MultipeCompletedTemporaryFailureStatusReportsSMSCScheme
+END_TESTCASE SMS-GSMU-0114
+
+
+START_TESTCASE SMS-GSMU-0115
+//!@SYMTestCaseID SMS-GSMU-0115	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive "completed" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "completed" status report for last PDU - PDU(150)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification isn't received after sending. The status report received is logged and a notification is generated on receiving it.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUSingleStatusReportLastPDUSMSCScheme
+END_TESTCASE SMS-GSMU-0115
+
+
+START_TESTCASE SMS-GSMU-0116
+//!@SYMTestCaseID SMS-GSMU-0116	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive "temporary failure" and "completed" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "temporary failure" status report for last PDU - PDU(151)
+//6. Receive "completed" status report for last PDU - PDU(152)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification only received after receiving status report PDU(152).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUTemporaryCompleteStatusReportLastPDUSMSCScheme
+END_TESTCASE SMS-GSMU-0116
+
+
+START_TESTCASE SMS-GSMU-0117
+//!@SYMTestCaseID SMS-GSMU-0117	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive "permanent failure" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "permanent failure" status report for last PDU - PDU(153)
+//6. Unmark the heap
+//!@SYMTestExpectedResults A notification is only received after receiving status report PDU(153).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUPermanentFailureStatusReportLastPDUSMSCScheme
+END_TESTCASE SMS-GSMU-0117
+
+
+START_TESTCASE SMS-GSMU-0118
+//!@SYMTestCaseID SMS-GSMU-0118	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority Critical
+//!@SYMTestCaseDesc Receive "temporary failure" and "permanent failure" status reports for a multiple 8 bit PDU message with SMSC scheme set (0x01) in last segment only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and SMSC scheme set in last segment (0x01).
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "temporary failure" status report for last PDU - PDU(154)
+//6. Receive "permanent failure" status report for last PDU - PDU(155)
+//7. Unmark the heap
+//!@SYMTestExpectedResults A notification only received after receiving status report PDU(155).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingLastSMSC z:\testdata\configs\te_statusReportScheme.ini MultipePDUTemporaryPermanentFailureStatusReportLastPDUSMSCScheme
+END_TESTCASE SMS-GSMU-0118
+
+
+START_TESTCASE SMS-GSMU-0119
+//!@SYMTestCaseID SMS-GSMU-0119	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive "completed" status reports for first and third PDU of a multiple 8 bit PDU message with SMSC set (0x01) in first and last only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and SMSC set in first and last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "completed" status report for first PDU - PDU(156)
+//6. Receive "completed" status report for last PDU - PDU(157)
+//7. Receive "completed" status report for second PDU - PDU(158)
+//8. Unmark the heap
+//!@SYMTestExpectedResults A notification is generated on receiving PDU(157).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCSomePDUs z:\testdata\configs\te_statusReportScheme.ini CompletedStatusReportForFirstAndThirdPDUSMSC
+END_TESTCASE SMS-GSMU-0119
+
+
+START_TESTCASE SMS-GSMU-0120
+//!@SYMTestCaseID SMS-GSMU-0120	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive "permanent failure" status reports for first and second PDU of a multiple 8 bit PDU message with SMSC set (0x01) in first and second only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create SMS message with test data (4) and SMSC set in first and last segment.
+//3. Send the message and check request completes KErrNone 
+//4. Delete the message
+//5. Receive "permanent failure" status report for first PDU - PDU(159)
+//6. Receive "permanent failure" status report for second PDU - PDU(160)
+//7. Receive "permanent failure" status report for last PDU - PDU(161)
+//8. Unmark the heap
+//!@SYMTestExpectedResults A notification is generated on receiving PDU(160).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCSomePDUs z:\testdata\configs\te_statusReportScheme.ini PermanentFailureStatusReportForFirstAndSecondPDUSMSC
+END_TESTCASE SMS-GSMU-0120
+
+
+START_TESTCASE SMS-GSMU-0049
+//!@SYMTestCaseID SMS-GSMU-0049	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive single 8 bit PDU with TP-SRR status report scheme.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Trigger the sending of messages with sending message
+//3. Receive a message of PDU (804).
+//4. Delete the message
+//5. Unmark the heap
+//!@SYMTestExpectedResults Message received has TSmsStatusReportScheme::EDefaultScheme scheme and has text of test data(2).
+RUN_TEST_STEP  100 TE_smsprt TestReceivingDeliversWithTPSRR z:\testdata\configs\te_statusReportScheme.ini ReceiveDeliversWithTPSRRSingle8Bit
+END_TESTCASE SMS-GSMU-0049
+
+
+START_TESTCASE SMS-GSMU-0058
+//!@SYMTestCaseID SMS-GSMU-0058	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive 8 bit multiple PDU message with no status report scheme.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Trigger receive by sending a message PDU(1)
+//3. Receive PDUs (826-828) the message and check request completes KErrNone
+//4. Check message contains text of test data (4) and has TSmsStatusReportScheme::EDefaultScheme scheme.
+//5. Delete the message
+//6. Unmark the heap
+//!@SYMTestExpectedResults The message is verified as containing test data (4) and is found to have TSmsStatusReportScheme::EDefaultScheme status report scheme set.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingDeliversWithTPSRR z:\testdata\configs\te_statusReportScheme.ini ReceiveDeliversWithTPSRRMultiple8Bit
+END_TESTCASE SMS-GSMU-0058
+
+
+START_TESTCASE SMS-GSMU-0061
+//!@SYMTestCaseID SMS-GSMU-0061	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive 7 bit multiple PDU message with TP-SRR status report scheme set in all segments.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Trigger receive by sending a message
+//3. Receive PDUs (32-34) and check request completes successfully
+//4. Check message it has text data = test data (4) and has TSmsStatusReportScheme::ETPSRRScheme scheme set for every PDU.
+//5. Delete the message
+//6. Unmark the heap
+//!@SYMTestExpectedResults The message received has text of test data (4) and has TSmsStatusReportScheme::ETPSRRScheme scheme set for every PDU.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingDeliversWithTPSRR z:\testdata\configs\te_statusReportScheme.ini ReceiveDeliversWithTPSRRMultiple7Bit
+END_TESTCASE SMS-GSMU-0061
+
+
+START_TESTCASE SMS-GSMU-0070
+//!@SYMTestCaseID SMS-GSMU-0070	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive 8 bit multiple PDU message with TP-SRR scheme set in the third (last) PDU only.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Trigger receiving by sending a message
+//3. Receive a message PDUs(844-846) and check message is received ok.
+//4. Check message has TSmsStatusReportScheme::ETPSRRScheme scheme set only in last PDU.
+//5. Delete the message
+//6. Unmark the heap
+//!@SYMTestExpectedResults The message received has text of test data (4) and has TSmsStatusReportScheme::ETPSRRScheme scheme set in third segment only.
+RUN_TEST_STEP  100 TE_smsprt TestDeliversWithTPSRRScheme z:\testdata\configs\te_statusReportScheme.ini ReceiveDeliversWithTPSRRMultiple8BitLastPDU
+END_TESTCASE SMS-GSMU-0070
+
+
+START_TESTCASE SMS-GSMU-0051
+//!@SYMTestCaseID SMS-GSMU-0051	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Send single 8 bit PDU with SMSC status report scheme specifying no status report requested, i.e. 0x00.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (3)
+//3. Set the scheme to TSmsStatusReportScheme::EControlParametersScheme and value = 0x00
+//4. Send the message check request completes KErrNone 
+//5. Delete the message.
+//6. Unmark the heap
+//!@SYMTestExpectedResults The message is sent successfully - SIMTSY has verified the format and correctness of the PDU = PDU(805) - it contains an SMSC control element with a value of 0x00.
+RUN_TEST_STEP  100 TE_smsprt TestSendingSMSCSchemeSinglePDUNoBitSet z:\testdata\configs\te_statusReportScheme.ini Send8BitSMSCSchemeSinglePDUNoBitSet
+END_TESTCASE SMS-GSMU-0051
+
+
+START_TESTCASE SMS-GSMU-0052
+//!@SYMTestCaseID SMS-GSMU-0052
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive single 7 bit PDU with SMSC status report scheme specifying no status report requested, i.e. 0x00.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Receive a message of PDU.
+//3. Test that the scheme is set to SMSC and the status report = 0x00.
+//4. Delete the message
+//5. Unmark the heap
+//!@SYMTestExpectedResults Message received has TSmsStatusReportScheme::EControlParametersScheme scheme set with value=0x00.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCSinglePDU z:\testdata\configs\te_statusReportScheme.ini Receive7BitSMSCSchemSinglePDU
+END_TESTCASE SMS-GSMU-0052
+
+
+START_TESTCASE SMS-GSMU-0055
+//!@SYMTestCaseID SMS-GSMU-0055	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Send single 8 bit PDU with SMSC status report scheme with status report requested for every possible combination, i.e. ESmsStatusReportTransactionCompleted=0x01,  ESmsStatusReportPermanentError, ESmsStatusReportTemporaryError, ESmsStatusReportTemporaryErrorSCTrying, ESmsStatusReportForFutureUse1, ESmsStatusReportForFutureUse2, ESmsStatusReportCancelRestSRR, ESmsStatusReportIncludeOriginalUDH, ESmsSelectiveStatusReportMask.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (2)
+//3. Set scheme to TSmsStatusReportScheme::EControlParametersScheme
+//3. For each configuration of TSmsSMSCControlParameters
+//  3.1 Set value
+//  3.2 Send the message
+//  3.3 Delete the message.
+//4. Unmark the heap
+//!@SYMTestExpectedResults The messages configuration is set for all values up to ESmsStatusReportTemporaryErrorSCTrying.  The messages are sent successfully and SIMTSY has verified the format and correctness of the PDU - PDU(806-813) that it contains an SMSC control element with the corresponding SMSC control parameter value.
+RUN_TEST_STEP  100 TE_smsprt TestSendingSMSCSchemeSinglePDUSomeBitsSet z:\testdata\configs\te_statusReportScheme.ini Send8BitSMSCSchemeSinglePDUSomeBitsSet
+END_TESTCASE SMS-GSMU-0055
+
+
+START_TESTCASE SMS-GSMU-0056
+//!@SYMTestCaseID SMS-GSMU-0056
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive single 8 bit PDU messages with SMSC status report scheme set with status report requested for the lowest 4 bits that is 0x0F
+//!@SYMTestActions
+//1. Mark the heap
+//2. Receive a message of PDU.
+//3. Test that the scheme is set to SMSC and the status report = 0x0F.
+//4. Delete the message
+//5. Unmark the heap
+//!@SYMTestExpectedResults Message received has TSmsStatusReportScheme::EControlParametersScheme scheme set with value=0x0F.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCSinglePDU z:\testdata\configs\te_statusReportScheme.ini Receive8BitSMSCSchemSinglePDU
+END_TESTCASE SMS-GSMU-0056
+
+
+START_TESTCASE SMS-GSMU-0064
+//!@SYMTestCaseID SMS-GSMU-0064	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Send 8 bit multiple PDU message with SMSC status report scheme and set to not requesting status reports, i.e. 0x00.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (4)
+//3. Set scheme to TSmsStatusReportScheme::EControlParametersScheme scheme and with value 0x00
+//4. Send the message and check request completes KErrNone 
+//5. Delete the message
+//6. Unmark the heap
+//!@SYMTestExpectedResults The message sent is verified by SimTSY, PDUs (835-837) that it contains SMSC IE in every PDU and with value of 0x00.
+RUN_TEST_STEP  100 TE_smsprt TestSendingSMSCSchemeMultiplePDUsSomeBitsSet z:\testdata\configs\te_statusReportScheme.ini Send8BitSMSCSchemeMultiplePDU
+END_TESTCASE SMS-GSMU-0064
+
+
+START_TESTCASE SMS-GSMU-0065
+//!@SYMTestCaseID SMS-GSMU-0065
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive 7 bit multiple PDU message with SMSC status report scheme and all PDUs set to not requesting status reports, i.e. 0x00.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Receive a message of PDU.
+//3. Test that the scheme is set to SMSC and the status report = 0x00 for all the PDUs.
+//4. Delete the message
+//5. Unmark the heap
+//!@SYMTestExpectedResults Message received has TSmsStatusReportScheme::EControlParametersScheme scheme set with value=0x00.
+RUN_TEST_STEP 100 TE_smsprt TestReceivingSMSCMultiplePDU z:\testdata\configs\te_statusReportScheme.ini Receive7BitSMSCSchemeMultiplePDU
+END_TESTCASE SMS-GSMU-0065
+
+
+START_TESTCASE SMS-GSMU-0071
+//!@SYMTestCaseID SMS-GSMU-0071	
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Send 7 bit multiple PDU message with TSmsStatusReportScheme::EControlParametersScheme status report scheme for first and last PDU and set to ESmsStatusReportPermanentError and ESmsStatusReportTemporaryError respectively.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Create the message with test data (4)
+//3. Set SMSC scheme for first and last PDU or segment and set values to ESmsStatusReportPermanentError and ESmsStatusReportTemporaryError respectively.
+//4. Send the message and check request completes KErrNone 
+//5. Delete the message
+//6. Unmark the heap
+//!@SYMTestExpectedResults The message sent is verified by SimTSY by receving PDUs (47-49) which contain SMSC scheme for first and last PDU with values ESmsStatusReportPermanentError and ESmsStatusReportTemporaryError respectively.
+RUN_TEST_STEP  100 TE_smsprt TestSendingSMSCSchemeMultiplePDUsSomeBitsSet z:\testdata\configs\te_statusReportScheme.ini Send7BitSMSCSchemeMultiplePDU
+END_TESTCASE SMS-GSMU-0071
+
+
+START_TESTCASE SMS-GSMU-0074
+//!@SYMTestCaseID SMS-GSMU-0074
+//!@SYMFssID CR0205	
+//!@SYMTestPriority High
+//!@SYMTestCaseDesc Receive 8 bit multiple PDU message with SMSC status report scheme set in first and second PDU only and with values ESmsStatusReportForFutureUse2 and ESmsStatusReportCancelRestSRR respectively.
+//!@SYMTestActions
+//1. Mark the heap
+//2. Receive a message of PDU.
+//3. Test that the scheme is set to SMSC and the status report = 0x20 for the first PDU and 0x80 for the second PDU.
+//4. Delete the message
+//5. Unmark the heap
+//!@SYMTestExpectedResults Message received has TSmsStatusReportScheme::EControlParametersScheme scheme set with value = 0x20 for the first PDU and 0x80 for the second PDU.
+RUN_TEST_STEP  100 TE_smsprt TestReceivingSMSCMultiplePDU z:\testdata\configs\te_statusReportScheme.ini Receive8BitSMSCSchemMultiplePDU
+END_TESTCASE SMS-GSMU-0074
+RUN_SCRIPT  z:\testdata\scripts\smsstackcleanprivatedata.script