--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/libraries/spcre/libpcre/pcre/doc/pcre.txt Wed Jun 23 15:52:26 2010 +0100
@@ -0,0 +1,6616 @@
+-----------------------------------------------------------------------------
+This file contains a concatenation of the PCRE man pages, converted to plain
+text format for ease of searching with a text editor, or for use on systems
+that do not have a man page processor. The small individual files that give
+synopses of each function in the library have not been included. There are
+separate text files for the pcregrep and pcretest commands.
+-----------------------------------------------------------------------------
+
+
+PCRE(3) PCRE(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+INTRODUCTION
+
+ The PCRE library is a set of functions that implement regular expres-
+ sion pattern matching using the same syntax and semantics as Perl, with
+ just a few differences. Certain features that appeared in Python and
+ PCRE before they appeared in Perl are also available using the Python
+ syntax. There is also some support for certain .NET and Oniguruma syn-
+ tax items, and there is an option for requesting some minor changes
+ that give better JavaScript compatibility.
+
+ The current implementation of PCRE (release 7.x) corresponds approxi-
+ mately with Perl 5.10, including support for UTF-8 encoded strings and
+ Unicode general category properties. However, UTF-8 and Unicode support
+ has to be explicitly enabled; it is not the default. The Unicode tables
+ correspond to Unicode release 5.0.0.
+
+ In addition to the Perl-compatible matching function, PCRE contains an
+ alternative matching function that matches the same compiled patterns
+ in a different way. In certain circumstances, the alternative function
+ has some advantages. For a discussion of the two matching algorithms,
+ see the pcrematching page.
+
+ PCRE is written in C and released as a C library. A number of people
+ have written wrappers and interfaces of various kinds. In particular,
+ Google Inc. have provided a comprehensive C++ wrapper. This is now
+ included as part of the PCRE distribution. The pcrecpp page has details
+ of this interface. Other people's contributions can be found in the
+ Contrib directory at the primary FTP site, which is:
+
+ ftp://ftp.csx.cam.ac.uk/pub/software/programming/pcre
+
+ Details of exactly which Perl regular expression features are and are
+ not supported by PCRE are given in separate documents. See the pcrepat-
+ tern and pcrecompat pages. There is a syntax summary in the pcresyntax
+ page.
+
+ Some features of PCRE can be included, excluded, or changed when the
+ library is built. The pcre_config() function makes it possible for a
+ client to discover which features are available. The features them-
+ selves are described in the pcrebuild page. Documentation about build-
+ ing PCRE for various operating systems can be found in the README file
+ in the source distribution.
+
+ The library contains a number of undocumented internal functions and
+ data tables that are used by more than one of the exported external
+ functions, but which are not intended for use by external callers.
+ Their names all begin with "_pcre_", which hopefully will not provoke
+ any name clashes. In some environments, it is possible to control which
+ external symbols are exported when a shared library is built, and in
+ these cases the undocumented symbols are not exported.
+
+
+USER DOCUMENTATION
+
+ The user documentation for PCRE comprises a number of different sec-
+ tions. In the "man" format, each of these is a separate "man page". In
+ the HTML format, each is a separate page, linked from the index page.
+ In the plain text format, all the sections are concatenated, for ease
+ of searching. The sections are as follows:
+
+ pcre this document
+ pcre-config show PCRE installation configuration information
+ pcreapi details of PCRE's native C API
+ pcrebuild options for building PCRE
+ pcrecallout details of the callout feature
+ pcrecompat discussion of Perl compatibility
+ pcrecpp details of the C++ wrapper
+ pcregrep description of the pcregrep command
+ pcrematching discussion of the two matching algorithms
+ pcrepartial details of the partial matching facility
+ pcrepattern syntax and semantics of supported
+ regular expressions
+ pcresyntax quick syntax reference
+ pcreperform discussion of performance issues
+ pcreposix the POSIX-compatible C API
+ pcreprecompile details of saving and re-using precompiled patterns
+ pcresample discussion of the sample program
+ pcrestack discussion of stack usage
+ pcretest description of the pcretest testing command
+
+ In addition, in the "man" and HTML formats, there is a short page for
+ each C library function, listing its arguments and results.
+
+
+LIMITATIONS
+
+ There are some size limitations in PCRE but it is hoped that they will
+ never in practice be relevant.
+
+ The maximum length of a compiled pattern is 65539 (sic) bytes if PCRE
+ is compiled with the default internal linkage size of 2. If you want to
+ process regular expressions that are truly enormous, you can compile
+ PCRE with an internal linkage size of 3 or 4 (see the README file in
+ the source distribution and the pcrebuild documentation for details).
+ In these cases the limit is substantially larger. However, the speed
+ of execution is slower.
+
+ All values in repeating quantifiers must be less than 65536.
+
+ There is no limit to the number of parenthesized subpatterns, but there
+ can be no more than 65535 capturing subpatterns.
+
+ The maximum length of name for a named subpattern is 32 characters, and
+ the maximum number of named subpatterns is 10000.
+
+ The maximum length of a subject string is the largest positive number
+ that an integer variable can hold. However, when using the traditional
+ matching function, PCRE uses recursion to handle subpatterns and indef-
+ inite repetition. This means that the available stack space may limit
+ the size of a subject string that can be processed by certain patterns.
+ For a discussion of stack issues, see the pcrestack documentation.
+
+
+UTF-8 AND UNICODE PROPERTY SUPPORT
+
+ From release 3.3, PCRE has had some support for character strings
+ encoded in the UTF-8 format. For release 4.0 this was greatly extended
+ to cover most common requirements, and in release 5.0 additional sup-
+ port for Unicode general category properties was added.
+
+ In order process UTF-8 strings, you must build PCRE to include UTF-8
+ support in the code, and, in addition, you must call pcre_compile()
+ with the PCRE_UTF8 option flag. When you do this, both the pattern and
+ any subject strings that are matched against it are treated as UTF-8
+ strings instead of just strings of bytes.
+
+ If you compile PCRE with UTF-8 support, but do not use it at run time,
+ the library will be a bit bigger, but the additional run time overhead
+ is limited to testing the PCRE_UTF8 flag occasionally, so should not be
+ very big.
+
+ If PCRE is built with Unicode character property support (which implies
+ UTF-8 support), the escape sequences \p{..}, \P{..}, and \X are sup-
+ ported. The available properties that can be tested are limited to the
+ general category properties such as Lu for an upper case letter or Nd
+ for a decimal number, the Unicode script names such as Arabic or Han,
+ and the derived properties Any and L&. A full list is given in the
+ pcrepattern documentation. Only the short names for properties are sup-
+ ported. For example, \p{L} matches a letter. Its Perl synonym, \p{Let-
+ ter}, is not supported. Furthermore, in Perl, many properties may
+ optionally be prefixed by "Is", for compatibility with Perl 5.6. PCRE
+ does not support this.
+
+ Validity of UTF-8 strings
+
+ When you set the PCRE_UTF8 flag, the strings passed as patterns and
+ subjects are (by default) checked for validity on entry to the relevant
+ functions. From release 7.3 of PCRE, the check is according the rules
+ of RFC 3629, which are themselves derived from the Unicode specifica-
+ tion. Earlier releases of PCRE followed the rules of RFC 2279, which
+ allows the full range of 31-bit values (0 to 0x7FFFFFFF). The current
+ check allows only values in the range U+0 to U+10FFFF, excluding U+D800
+ to U+DFFF.
+
+ The excluded code points are the "Low Surrogate Area" of Unicode, of
+ which the Unicode Standard says this: "The Low Surrogate Area does not
+ contain any character assignments, consequently no character code
+ charts or namelists are provided for this area. Surrogates are reserved
+ for use with UTF-16 and then must be used in pairs." The code points
+ that are encoded by UTF-16 pairs are available as independent code
+ points in the UTF-8 encoding. (In other words, the whole surrogate
+ thing is a fudge for UTF-16 which unfortunately messes up UTF-8.)
+
+ If an invalid UTF-8 string is passed to PCRE, an error return
+ (PCRE_ERROR_BADUTF8) is given. In some situations, you may already know
+ that your strings are valid, and therefore want to skip these checks in
+ order to improve performance. If you set the PCRE_NO_UTF8_CHECK flag at
+ compile time or at run time, PCRE assumes that the pattern or subject
+ it is given (respectively) contains only valid UTF-8 codes. In this
+ case, it does not diagnose an invalid UTF-8 string.
+
+ If you pass an invalid UTF-8 string when PCRE_NO_UTF8_CHECK is set,
+ what happens depends on why the string is invalid. If the string con-
+ forms to the "old" definition of UTF-8 (RFC 2279), it is processed as a
+ string of characters in the range 0 to 0x7FFFFFFF. In other words,
+ apart from the initial validity test, PCRE (when in UTF-8 mode) handles
+ strings according to the more liberal rules of RFC 2279. However, if
+ the string does not even conform to RFC 2279, the result is undefined.
+ Your program may crash.
+
+ If you want to process strings of values in the full range 0 to
+ 0x7FFFFFFF, encoded in a UTF-8-like manner as per the old RFC, you can
+ set PCRE_NO_UTF8_CHECK to bypass the more restrictive test. However, in
+ this situation, you will have to apply your own validity check.
+
+ General comments about UTF-8 mode
+
+ 1. An unbraced hexadecimal escape sequence (such as \xb3) matches a
+ two-byte UTF-8 character if the value is greater than 127.
+
+ 2. Octal numbers up to \777 are recognized, and match two-byte UTF-8
+ characters for values greater than \177.
+
+ 3. Repeat quantifiers apply to complete UTF-8 characters, not to indi-
+ vidual bytes, for example: \x{100}{3}.
+
+ 4. The dot metacharacter matches one UTF-8 character instead of a sin-
+ gle byte.
+
+ 5. The escape sequence \C can be used to match a single byte in UTF-8
+ mode, but its use can lead to some strange effects. This facility is
+ not available in the alternative matching function, pcre_dfa_exec().
+
+ 6. The character escapes \b, \B, \d, \D, \s, \S, \w, and \W correctly
+ test characters of any code value, but the characters that PCRE recog-
+ nizes as digits, spaces, or word characters remain the same set as
+ before, all with values less than 256. This remains true even when PCRE
+ includes Unicode property support, because to do otherwise would slow
+ down PCRE in many common cases. If you really want to test for a wider
+ sense of, say, "digit", you must use Unicode property tests such as
+ \p{Nd}.
+
+ 7. Similarly, characters that match the POSIX named character classes
+ are all low-valued characters.
+
+ 8. However, the Perl 5.10 horizontal and vertical whitespace matching
+ escapes (\h, \H, \v, and \V) do match all the appropriate Unicode char-
+ acters.
+
+ 9. Case-insensitive matching applies only to characters whose values
+ are less than 128, unless PCRE is built with Unicode property support.
+ Even when Unicode property support is available, PCRE still uses its
+ own character tables when checking the case of low-valued characters,
+ so as not to degrade performance. The Unicode property information is
+ used only for characters with higher values. Even when Unicode property
+ support is available, PCRE supports case-insensitive matching only when
+ there is a one-to-one mapping between a letter's cases. There are a
+ small number of many-to-one mappings in Unicode; these are not sup-
+ ported by PCRE.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+ Putting an actual email address here seems to have been a spam magnet,
+ so I've taken it away. If you want to email me, use my two initials,
+ followed by the two digits 10, at the domain cam.ac.uk.
+
+
+REVISION
+
+ Last updated: 12 April 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREBUILD(3) PCREBUILD(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE BUILD-TIME OPTIONS
+
+ This document describes the optional features of PCRE that can be
+ selected when the library is compiled. It assumes use of the configure
+ script, where the optional features are selected or deselected by pro-
+ viding options to configure before running the make command. However,
+ the same options can be selected in both Unix-like and non-Unix-like
+ environments using the GUI facility of CMakeSetup if you are using
+ CMake instead of configure to build PCRE.
+
+ The complete list of options for configure (which includes the standard
+ ones such as the selection of the installation directory) can be
+ obtained by running
+
+ ./configure --help
+
+ The following sections include descriptions of options whose names
+ begin with --enable or --disable. These settings specify changes to the
+ defaults for the configure command. Because of the way that configure
+ works, --enable and --disable always come in pairs, so the complemen-
+ tary option always exists as well, but as it specifies the default, it
+ is not described.
+
+
+C++ SUPPORT
+
+ By default, the configure script will search for a C++ compiler and C++
+ header files. If it finds them, it automatically builds the C++ wrapper
+ library for PCRE. You can disable this by adding
+
+ --disable-cpp
+
+ to the configure command.
+
+
+UTF-8 SUPPORT
+
+ To build PCRE with support for UTF-8 character strings, add
+
+ --enable-utf8
+
+ to the configure command. Of itself, this does not make PCRE treat
+ strings as UTF-8. As well as compiling PCRE with this option, you also
+ have have to set the PCRE_UTF8 option when you call the pcre_compile()
+ function.
+
+
+UNICODE CHARACTER PROPERTY SUPPORT
+
+ UTF-8 support allows PCRE to process character values greater than 255
+ in the strings that it handles. On its own, however, it does not pro-
+ vide any facilities for accessing the properties of such characters. If
+ you want to be able to use the pattern escapes \P, \p, and \X, which
+ refer to Unicode character properties, you must add
+
+ --enable-unicode-properties
+
+ to the configure command. This implies UTF-8 support, even if you have
+ not explicitly requested it.
+
+ Including Unicode property support adds around 30K of tables to the
+ PCRE library. Only the general category properties such as Lu and Nd
+ are supported. Details are given in the pcrepattern documentation.
+
+
+CODE VALUE OF NEWLINE
+
+ By default, PCRE interprets character 10 (linefeed, LF) as indicating
+ the end of a line. This is the normal newline character on Unix-like
+ systems. You can compile PCRE to use character 13 (carriage return, CR)
+ instead, by adding
+
+ --enable-newline-is-cr
+
+ to the configure command. There is also a --enable-newline-is-lf
+ option, which explicitly specifies linefeed as the newline character.
+
+ Alternatively, you can specify that line endings are to be indicated by
+ the two character sequence CRLF. If you want this, add
+
+ --enable-newline-is-crlf
+
+ to the configure command. There is a fourth option, specified by
+
+ --enable-newline-is-anycrlf
+
+ which causes PCRE to recognize any of the three sequences CR, LF, or
+ CRLF as indicating a line ending. Finally, a fifth option, specified by
+
+ --enable-newline-is-any
+
+ causes PCRE to recognize any Unicode newline sequence.
+
+ Whatever line ending convention is selected when PCRE is built can be
+ overridden when the library functions are called. At build time it is
+ conventional to use the standard for your operating system.
+
+
+WHAT \R MATCHES
+
+ By default, the sequence \R in a pattern matches any Unicode newline
+ sequence, whatever has been selected as the line ending sequence. If
+ you specify
+
+ --enable-bsr-anycrlf
+
+ the default is changed so that \R matches only CR, LF, or CRLF. What-
+ ever is selected when PCRE is built can be overridden when the library
+ functions are called.
+
+
+BUILDING SHARED AND STATIC LIBRARIES
+
+ The PCRE building process uses libtool to build both shared and static
+ Unix libraries by default. You can suppress one of these by adding one
+ of
+
+ --disable-shared
+ --disable-static
+
+ to the configure command, as required.
+
+
+POSIX MALLOC USAGE
+
+ When PCRE is called through the POSIX interface (see the pcreposix doc-
+ umentation), additional working storage is required for holding the
+ pointers to capturing substrings, because PCRE requires three integers
+ per substring, whereas the POSIX interface provides only two. If the
+ number of expected substrings is small, the wrapper function uses space
+ on the stack, because this is faster than using malloc() for each call.
+ The default threshold above which the stack is no longer used is 10; it
+ can be changed by adding a setting such as
+
+ --with-posix-malloc-threshold=20
+
+ to the configure command.
+
+
+HANDLING VERY LARGE PATTERNS
+
+ Within a compiled pattern, offset values are used to point from one
+ part to another (for example, from an opening parenthesis to an alter-
+ nation metacharacter). By default, two-byte values are used for these
+ offsets, leading to a maximum size for a compiled pattern of around
+ 64K. This is sufficient to handle all but the most gigantic patterns.
+ Nevertheless, some people do want to process enormous patterns, so it
+ is possible to compile PCRE to use three-byte or four-byte offsets by
+ adding a setting such as
+
+ --with-link-size=3
+
+ to the configure command. The value given must be 2, 3, or 4. Using
+ longer offsets slows down the operation of PCRE because it has to load
+ additional bytes when handling them.
+
+
+AVOIDING EXCESSIVE STACK USAGE
+
+ When matching with the pcre_exec() function, PCRE implements backtrack-
+ ing by making recursive calls to an internal function called match().
+ In environments where the size of the stack is limited, this can se-
+ verely limit PCRE's operation. (The Unix environment does not usually
+ suffer from this problem, but it may sometimes be necessary to increase
+ the maximum stack size. There is a discussion in the pcrestack docu-
+ mentation.) An alternative approach to recursion that uses memory from
+ the heap to remember data, instead of using recursive function calls,
+ has been implemented to work round the problem of limited stack size.
+ If you want to build a version of PCRE that works this way, add
+
+ --disable-stack-for-recursion
+
+ to the configure command. With this configuration, PCRE will use the
+ pcre_stack_malloc and pcre_stack_free variables to call memory manage-
+ ment functions. By default these point to malloc() and free(), but you
+ can replace the pointers so that your own functions are used.
+
+ Separate functions are provided rather than using pcre_malloc and
+ pcre_free because the usage is very predictable: the block sizes
+ requested are always the same, and the blocks are always freed in
+ reverse order. A calling program might be able to implement optimized
+ functions that perform better than malloc() and free(). PCRE runs
+ noticeably more slowly when built in this way. This option affects only
+ the pcre_exec() function; it is not relevant for the the
+ pcre_dfa_exec() function.
+
+
+LIMITING PCRE RESOURCE USAGE
+
+ Internally, PCRE has a function called match(), which it calls repeat-
+ edly (sometimes recursively) when matching a pattern with the
+ pcre_exec() function. By controlling the maximum number of times this
+ function may be called during a single matching operation, a limit can
+ be placed on the resources used by a single call to pcre_exec(). The
+ limit can be changed at run time, as described in the pcreapi documen-
+ tation. The default is 10 million, but this can be changed by adding a
+ setting such as
+
+ --with-match-limit=500000
+
+ to the configure command. This setting has no effect on the
+ pcre_dfa_exec() matching function.
+
+ In some environments it is desirable to limit the depth of recursive
+ calls of match() more strictly than the total number of calls, in order
+ to restrict the maximum amount of stack (or heap, if --disable-stack-
+ for-recursion is specified) that is used. A second limit controls this;
+ it defaults to the value that is set for --with-match-limit, which
+ imposes no additional constraints. However, you can set a lower limit
+ by adding, for example,
+
+ --with-match-limit-recursion=10000
+
+ to the configure command. This value can also be overridden at run
+ time.
+
+
+CREATING CHARACTER TABLES AT BUILD TIME
+
+ PCRE uses fixed tables for processing characters whose code values are
+ less than 256. By default, PCRE is built with a set of tables that are
+ distributed in the file pcre_chartables.c.dist. These tables are for
+ ASCII codes only. If you add
+
+ --enable-rebuild-chartables
+
+ to the configure command, the distributed tables are no longer used.
+ Instead, a program called dftables is compiled and run. This outputs
+ the source for new set of tables, created in the default locale of your
+ C runtime system. (This method of replacing the tables does not work if
+ you are cross compiling, because dftables is run on the local host. If
+ you need to create alternative tables when cross compiling, you will
+ have to do so "by hand".)
+
+
+USING EBCDIC CODE
+
+ PCRE assumes by default that it will run in an environment where the
+ character code is ASCII (or Unicode, which is a superset of ASCII).
+ This is the case for most computer operating systems. PCRE can, how-
+ ever, be compiled to run in an EBCDIC environment by adding
+
+ --enable-ebcdic
+
+ to the configure command. This setting implies --enable-rebuild-charta-
+ bles. You should only use it if you know that you are in an EBCDIC
+ environment (for example, an IBM mainframe operating system).
+
+
+PCREGREP OPTIONS FOR COMPRESSED FILE SUPPORT
+
+ By default, pcregrep reads all files as plain text. You can build it so
+ that it recognizes files whose names end in .gz or .bz2, and reads them
+ with libz or libbz2, respectively, by adding one or both of
+
+ --enable-pcregrep-libz
+ --enable-pcregrep-libbz2
+
+ to the configure command. These options naturally require that the rel-
+ evant libraries are installed on your system. Configuration will fail
+ if they are not.
+
+
+PCRETEST OPTION FOR LIBREADLINE SUPPORT
+
+ If you add
+
+ --enable-pcretest-libreadline
+
+ to the configure command, pcretest is linked with the libreadline
+ library, and when its input is from a terminal, it reads it using the
+ readline() function. This provides line-editing and history facilities.
+ Note that libreadline is GPL-licenced, so if you distribute a binary of
+ pcretest linked in this way, there may be licensing issues.
+
+ Setting this option causes the -lreadline option to be added to the
+ pcretest build. In many operating environments with a sytem-installed
+ libreadline this is sufficient. However, in some environments (e.g. if
+ an unmodified distribution version of readline is in use), some extra
+ configuration may be necessary. The INSTALL file for libreadline says
+ this:
+
+ "Readline uses the termcap functions, but does not link with the
+ termcap or curses library itself, allowing applications which link
+ with readline the to choose an appropriate library."
+
+ If your environment has not been set up so that an appropriate library
+ is automatically included, you may need to add something like
+
+ LIBS="-ncurses"
+
+ immediately before the configure command.
+
+
+SEE ALSO
+
+ pcreapi(3), pcre_config(3).
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 13 April 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREMATCHING(3) PCREMATCHING(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE MATCHING ALGORITHMS
+
+ This document describes the two different algorithms that are available
+ in PCRE for matching a compiled regular expression against a given sub-
+ ject string. The "standard" algorithm is the one provided by the
+ pcre_exec() function. This works in the same was as Perl's matching
+ function, and provides a Perl-compatible matching operation.
+
+ An alternative algorithm is provided by the pcre_dfa_exec() function;
+ this operates in a different way, and is not Perl-compatible. It has
+ advantages and disadvantages compared with the standard algorithm, and
+ these are described below.
+
+ When there is only one possible way in which a given subject string can
+ match a pattern, the two algorithms give the same answer. A difference
+ arises, however, when there are multiple possibilities. For example, if
+ the pattern
+
+ ^<.*>
+
+ is matched against the string
+
+ <something> <something else> <something further>
+
+ there are three possible answers. The standard algorithm finds only one
+ of them, whereas the alternative algorithm finds all three.
+
+
+REGULAR EXPRESSIONS AS TREES
+
+ The set of strings that are matched by a regular expression can be rep-
+ resented as a tree structure. An unlimited repetition in the pattern
+ makes the tree of infinite size, but it is still a tree. Matching the
+ pattern to a given subject string (from a given starting point) can be
+ thought of as a search of the tree. There are two ways to search a
+ tree: depth-first and breadth-first, and these correspond to the two
+ matching algorithms provided by PCRE.
+
+
+THE STANDARD MATCHING ALGORITHM
+
+ In the terminology of Jeffrey Friedl's book "Mastering Regular Expres-
+ sions", the standard algorithm is an "NFA algorithm". It conducts a
+ depth-first search of the pattern tree. That is, it proceeds along a
+ single path through the tree, checking that the subject matches what is
+ required. When there is a mismatch, the algorithm tries any alterna-
+ tives at the current point, and if they all fail, it backs up to the
+ previous branch point in the tree, and tries the next alternative
+ branch at that level. This often involves backing up (moving to the
+ left) in the subject string as well. The order in which repetition
+ branches are tried is controlled by the greedy or ungreedy nature of
+ the quantifier.
+
+ If a leaf node is reached, a matching string has been found, and at
+ that point the algorithm stops. Thus, if there is more than one possi-
+ ble match, this algorithm returns the first one that it finds. Whether
+ this is the shortest, the longest, or some intermediate length depends
+ on the way the greedy and ungreedy repetition quantifiers are specified
+ in the pattern.
+
+ Because it ends up with a single path through the tree, it is rela-
+ tively straightforward for this algorithm to keep track of the sub-
+ strings that are matched by portions of the pattern in parentheses.
+ This provides support for capturing parentheses and back references.
+
+
+THE ALTERNATIVE MATCHING ALGORITHM
+
+ This algorithm conducts a breadth-first search of the tree. Starting
+ from the first matching point in the subject, it scans the subject
+ string from left to right, once, character by character, and as it does
+ this, it remembers all the paths through the tree that represent valid
+ matches. In Friedl's terminology, this is a kind of "DFA algorithm",
+ though it is not implemented as a traditional finite state machine (it
+ keeps multiple states active simultaneously).
+
+ The scan continues until either the end of the subject is reached, or
+ there are no more unterminated paths. At this point, terminated paths
+ represent the different matching possibilities (if there are none, the
+ match has failed). Thus, if there is more than one possible match,
+ this algorithm finds all of them, and in particular, it finds the long-
+ est. In PCRE, there is an option to stop the algorithm after the first
+ match (which is necessarily the shortest) has been found.
+
+ Note that all the matches that are found start at the same point in the
+ subject. If the pattern
+
+ cat(er(pillar)?)
+
+ is matched against the string "the caterpillar catchment", the result
+ will be the three strings "cat", "cater", and "caterpillar" that start
+ at the fourth character of the subject. The algorithm does not automat-
+ ically move on to find matches that start at later positions.
+
+ There are a number of features of PCRE regular expressions that are not
+ supported by the alternative matching algorithm. They are as follows:
+
+ 1. Because the algorithm finds all possible matches, the greedy or
+ ungreedy nature of repetition quantifiers is not relevant. Greedy and
+ ungreedy quantifiers are treated in exactly the same way. However, pos-
+ sessive quantifiers can make a difference when what follows could also
+ match what is quantified, for example in a pattern like this:
+
+ ^a++\w!
+
+ This pattern matches "aaab!" but not "aaa!", which would be matched by
+ a non-possessive quantifier. Similarly, if an atomic group is present,
+ it is matched as if it were a standalone pattern at the current point,
+ and the longest match is then "locked in" for the rest of the overall
+ pattern.
+
+ 2. When dealing with multiple paths through the tree simultaneously, it
+ is not straightforward to keep track of captured substrings for the
+ different matching possibilities, and PCRE's implementation of this
+ algorithm does not attempt to do this. This means that no captured sub-
+ strings are available.
+
+ 3. Because no substrings are captured, back references within the pat-
+ tern are not supported, and cause errors if encountered.
+
+ 4. For the same reason, conditional expressions that use a backrefer-
+ ence as the condition or test for a specific group recursion are not
+ supported.
+
+ 5. Because many paths through the tree may be active, the \K escape
+ sequence, which resets the start of the match when encountered (but may
+ be on some paths and not on others), is not supported. It causes an
+ error if encountered.
+
+ 6. Callouts are supported, but the value of the capture_top field is
+ always 1, and the value of the capture_last field is always -1.
+
+ 7. The \C escape sequence, which (in the standard algorithm) matches a
+ single byte, even in UTF-8 mode, is not supported because the alterna-
+ tive algorithm moves through the subject string one character at a
+ time, for all active paths through the tree.
+
+ 8. Except for (*FAIL), the backtracking control verbs such as (*PRUNE)
+ are not supported. (*FAIL) is supported, and behaves like a failing
+ negative assertion.
+
+
+ADVANTAGES OF THE ALTERNATIVE ALGORITHM
+
+ Using the alternative matching algorithm provides the following advan-
+ tages:
+
+ 1. All possible matches (at a single point in the subject) are automat-
+ ically found, and in particular, the longest match is found. To find
+ more than one match using the standard algorithm, you have to do kludgy
+ things with callouts.
+
+ 2. There is much better support for partial matching. The restrictions
+ on the content of the pattern that apply when using the standard algo-
+ rithm for partial matching do not apply to the alternative algorithm.
+ For non-anchored patterns, the starting position of a partial match is
+ available.
+
+ 3. Because the alternative algorithm scans the subject string just
+ once, and never needs to backtrack, it is possible to pass very long
+ subject strings to the matching function in several pieces, checking
+ for partial matching each time.
+
+
+DISADVANTAGES OF THE ALTERNATIVE ALGORITHM
+
+ The alternative algorithm suffers from a number of disadvantages:
+
+ 1. It is substantially slower than the standard algorithm. This is
+ partly because it has to search for all possible matches, but is also
+ because it is less susceptible to optimization.
+
+ 2. Capturing parentheses and back references are not supported.
+
+ 3. Although atomic groups are supported, their use does not provide the
+ performance advantage that it does for the standard algorithm.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 19 April 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREAPI(3) PCREAPI(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE NATIVE API
+
+ #include <pcre.h>
+
+ pcre *pcre_compile(const char *pattern, int options,
+ const char **errptr, int *erroffset,
+ const unsigned char *tableptr);
+
+ pcre *pcre_compile2(const char *pattern, int options,
+ int *errorcodeptr,
+ const char **errptr, int *erroffset,
+ const unsigned char *tableptr);
+
+ pcre_extra *pcre_study(const pcre *code, int options,
+ const char **errptr);
+
+ int pcre_exec(const pcre *code, const pcre_extra *extra,
+ const char *subject, int length, int startoffset,
+ int options, int *ovector, int ovecsize);
+
+ int pcre_dfa_exec(const pcre *code, const pcre_extra *extra,
+ const char *subject, int length, int startoffset,
+ int options, int *ovector, int ovecsize,
+ int *workspace, int wscount);
+
+ int pcre_copy_named_substring(const pcre *code,
+ const char *subject, int *ovector,
+ int stringcount, const char *stringname,
+ char *buffer, int buffersize);
+
+ int pcre_copy_substring(const char *subject, int *ovector,
+ int stringcount, int stringnumber, char *buffer,
+ int buffersize);
+
+ int pcre_get_named_substring(const pcre *code,
+ const char *subject, int *ovector,
+ int stringcount, const char *stringname,
+ const char **stringptr);
+
+ int pcre_get_stringnumber(const pcre *code,
+ const char *name);
+
+ int pcre_get_stringtable_entries(const pcre *code,
+ const char *name, char **first, char **last);
+
+ int pcre_get_substring(const char *subject, int *ovector,
+ int stringcount, int stringnumber,
+ const char **stringptr);
+
+ int pcre_get_substring_list(const char *subject,
+ int *ovector, int stringcount, const char ***listptr);
+
+ void pcre_free_substring(const char *stringptr);
+
+ void pcre_free_substring_list(const char **stringptr);
+
+ const unsigned char *pcre_maketables(void);
+
+ int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
+ int what, void *where);
+
+ int pcre_info(const pcre *code, int *optptr, int *firstcharptr);
+
+ int pcre_refcount(pcre *code, int adjust);
+
+ int pcre_config(int what, void *where);
+
+ char *pcre_version(void);
+
+ void *(*pcre_malloc)(size_t);
+
+ void (*pcre_free)(void *);
+
+ void *(*pcre_stack_malloc)(size_t);
+
+ void (*pcre_stack_free)(void *);
+
+ int (*pcre_callout)(pcre_callout_block *);
+
+
+PCRE API OVERVIEW
+
+ PCRE has its own native API, which is described in this document. There
+ are also some wrapper functions that correspond to the POSIX regular
+ expression API. These are described in the pcreposix documentation.
+ Both of these APIs define a set of C function calls. A C++ wrapper is
+ distributed with PCRE. It is documented in the pcrecpp page.
+
+ The native API C function prototypes are defined in the header file
+ pcre.h, and on Unix systems the library itself is called libpcre. It
+ can normally be accessed by adding -lpcre to the command for linking an
+ application that uses PCRE. The header file defines the macros
+ PCRE_MAJOR and PCRE_MINOR to contain the major and minor release num-
+ bers for the library. Applications can use these to include support
+ for different releases of PCRE.
+
+ The functions pcre_compile(), pcre_compile2(), pcre_study(), and
+ pcre_exec() are used for compiling and matching regular expressions in
+ a Perl-compatible manner. A sample program that demonstrates the sim-
+ plest way of using them is provided in the file called pcredemo.c in
+ the source distribution. The pcresample documentation describes how to
+ compile and run it.
+
+ A second matching function, pcre_dfa_exec(), which is not Perl-compati-
+ ble, is also provided. This uses a different algorithm for the match-
+ ing. The alternative algorithm finds all possible matches (at a given
+ point in the subject), and scans the subject just once. However, this
+ algorithm does not return captured substrings. A description of the two
+ matching algorithms and their advantages and disadvantages is given in
+ the pcrematching documentation.
+
+ In addition to the main compiling and matching functions, there are
+ convenience functions for extracting captured substrings from a subject
+ string that is matched by pcre_exec(). They are:
+
+ pcre_copy_substring()
+ pcre_copy_named_substring()
+ pcre_get_substring()
+ pcre_get_named_substring()
+ pcre_get_substring_list()
+ pcre_get_stringnumber()
+ pcre_get_stringtable_entries()
+
+ pcre_free_substring() and pcre_free_substring_list() are also provided,
+ to free the memory used for extracted strings.
+
+ The function pcre_maketables() is used to build a set of character
+ tables in the current locale for passing to pcre_compile(),
+ pcre_exec(), or pcre_dfa_exec(). This is an optional facility that is
+ provided for specialist use. Most commonly, no special tables are
+ passed, in which case internal tables that are generated when PCRE is
+ built are used.
+
+ The function pcre_fullinfo() is used to find out information about a
+ compiled pattern; pcre_info() is an obsolete version that returns only
+ some of the available information, but is retained for backwards com-
+ patibility. The function pcre_version() returns a pointer to a string
+ containing the version of PCRE and its date of release.
+
+ The function pcre_refcount() maintains a reference count in a data
+ block containing a compiled pattern. This is provided for the benefit
+ of object-oriented applications.
+
+ The global variables pcre_malloc and pcre_free initially contain the
+ entry points of the standard malloc() and free() functions, respec-
+ tively. PCRE calls the memory management functions via these variables,
+ so a calling program can replace them if it wishes to intercept the
+ calls. This should be done before calling any PCRE functions.
+
+ The global variables pcre_stack_malloc and pcre_stack_free are also
+ indirections to memory management functions. These special functions
+ are used only when PCRE is compiled to use the heap for remembering
+ data, instead of recursive function calls, when running the pcre_exec()
+ function. See the pcrebuild documentation for details of how to do
+ this. It is a non-standard way of building PCRE, for use in environ-
+ ments that have limited stacks. Because of the greater use of memory
+ management, it runs more slowly. Separate functions are provided so
+ that special-purpose external code can be used for this case. When
+ used, these functions are always called in a stack-like manner (last
+ obtained, first freed), and always for memory blocks of the same size.
+ There is a discussion about PCRE's stack usage in the pcrestack docu-
+ mentation.
+
+ The global variable pcre_callout initially contains NULL. It can be set
+ by the caller to a "callout" function, which PCRE will then call at
+ specified points during a matching operation. Details are given in the
+ pcrecallout documentation.
+
+
+NEWLINES
+
+ PCRE supports five different conventions for indicating line breaks in
+ strings: a single CR (carriage return) character, a single LF (line-
+ feed) character, the two-character sequence CRLF, any of the three pre-
+ ceding, or any Unicode newline sequence. The Unicode newline sequences
+ are the three just mentioned, plus the single characters VT (vertical
+ tab, U+000B), FF (formfeed, U+000C), NEL (next line, U+0085), LS (line
+ separator, U+2028), and PS (paragraph separator, U+2029).
+
+ Each of the first three conventions is used by at least one operating
+ system as its standard newline sequence. When PCRE is built, a default
+ can be specified. The default default is LF, which is the Unix stan-
+ dard. When PCRE is run, the default can be overridden, either when a
+ pattern is compiled, or when it is matched.
+
+ At compile time, the newline convention can be specified by the options
+ argument of pcre_compile(), or it can be specified by special text at
+ the start of the pattern itself; this overrides any other settings. See
+ the pcrepattern page for details of the special character sequences.
+
+ In the PCRE documentation the word "newline" is used to mean "the char-
+ acter or pair of characters that indicate a line break". The choice of
+ newline convention affects the handling of the dot, circumflex, and
+ dollar metacharacters, the handling of #-comments in /x mode, and, when
+ CRLF is a recognized line ending sequence, the match position advance-
+ ment for a non-anchored pattern. There is more detail about this in the
+ section on pcre_exec() options below.
+
+ The choice of newline convention does not affect the interpretation of
+ the \n or \r escape sequences, nor does it affect what \R matches,
+ which is controlled in a similar way, but by separate options.
+
+
+MULTITHREADING
+
+ The PCRE functions can be used in multi-threading applications, with
+ the proviso that the memory management functions pointed to by
+ pcre_malloc, pcre_free, pcre_stack_malloc, and pcre_stack_free, and the
+ callout function pointed to by pcre_callout, are shared by all threads.
+
+ The compiled form of a regular expression is not altered during match-
+ ing, so the same compiled pattern can safely be used by several threads
+ at once.
+
+
+SAVING PRECOMPILED PATTERNS FOR LATER USE
+
+ The compiled form of a regular expression can be saved and re-used at a
+ later time, possibly by a different program, and even on a host other
+ than the one on which it was compiled. Details are given in the
+ pcreprecompile documentation. However, compiling a regular expression
+ with one version of PCRE for use with a different version is not guar-
+ anteed to work and may cause crashes.
+
+
+CHECKING BUILD-TIME OPTIONS
+
+ int pcre_config(int what, void *where);
+
+ The function pcre_config() makes it possible for a PCRE client to dis-
+ cover which optional features have been compiled into the PCRE library.
+ The pcrebuild documentation has more details about these optional fea-
+ tures.
+
+ The first argument for pcre_config() is an integer, specifying which
+ information is required; the second argument is a pointer to a variable
+ into which the information is placed. The following information is
+ available:
+
+ PCRE_CONFIG_UTF8
+
+ The output is an integer that is set to one if UTF-8 support is avail-
+ able; otherwise it is set to zero.
+
+ PCRE_CONFIG_UNICODE_PROPERTIES
+
+ The output is an integer that is set to one if support for Unicode
+ character properties is available; otherwise it is set to zero.
+
+ PCRE_CONFIG_NEWLINE
+
+ The output is an integer whose value specifies the default character
+ sequence that is recognized as meaning "newline". The four values that
+ are supported are: 10 for LF, 13 for CR, 3338 for CRLF, -2 for ANYCRLF,
+ and -1 for ANY. The default should normally be the standard sequence
+ for your operating system.
+
+ PCRE_CONFIG_BSR
+
+ The output is an integer whose value indicates what character sequences
+ the \R escape sequence matches by default. A value of 0 means that \R
+ matches any Unicode line ending sequence; a value of 1 means that \R
+ matches only CR, LF, or CRLF. The default can be overridden when a pat-
+ tern is compiled or matched.
+
+ PCRE_CONFIG_LINK_SIZE
+
+ The output is an integer that contains the number of bytes used for
+ internal linkage in compiled regular expressions. The value is 2, 3, or
+ 4. Larger values allow larger regular expressions to be compiled, at
+ the expense of slower matching. The default value of 2 is sufficient
+ for all but the most massive patterns, since it allows the compiled
+ pattern to be up to 64K in size.
+
+ PCRE_CONFIG_POSIX_MALLOC_THRESHOLD
+
+ The output is an integer that contains the threshold above which the
+ POSIX interface uses malloc() for output vectors. Further details are
+ given in the pcreposix documentation.
+
+ PCRE_CONFIG_MATCH_LIMIT
+
+ The output is an integer that gives the default limit for the number of
+ internal matching function calls in a pcre_exec() execution. Further
+ details are given with pcre_exec() below.
+
+ PCRE_CONFIG_MATCH_LIMIT_RECURSION
+
+ The output is an integer that gives the default limit for the depth of
+ recursion when calling the internal matching function in a pcre_exec()
+ execution. Further details are given with pcre_exec() below.
+
+ PCRE_CONFIG_STACKRECURSE
+
+ The output is an integer that is set to one if internal recursion when
+ running pcre_exec() is implemented by recursive function calls that use
+ the stack to remember their state. This is the usual way that PCRE is
+ compiled. The output is zero if PCRE was compiled to use blocks of data
+ on the heap instead of recursive function calls. In this case,
+ pcre_stack_malloc and pcre_stack_free are called to manage memory
+ blocks on the heap, thus avoiding the use of the stack.
+
+
+COMPILING A PATTERN
+
+ pcre *pcre_compile(const char *pattern, int options,
+ const char **errptr, int *erroffset,
+ const unsigned char *tableptr);
+
+ pcre *pcre_compile2(const char *pattern, int options,
+ int *errorcodeptr,
+ const char **errptr, int *erroffset,
+ const unsigned char *tableptr);
+
+ Either of the functions pcre_compile() or pcre_compile2() can be called
+ to compile a pattern into an internal form. The only difference between
+ the two interfaces is that pcre_compile2() has an additional argument,
+ errorcodeptr, via which a numerical error code can be returned.
+
+ The pattern is a C string terminated by a binary zero, and is passed in
+ the pattern argument. A pointer to a single block of memory that is
+ obtained via pcre_malloc is returned. This contains the compiled code
+ and related data. The pcre type is defined for the returned block; this
+ is a typedef for a structure whose contents are not externally defined.
+ It is up to the caller to free the memory (via pcre_free) when it is no
+ longer required.
+
+ Although the compiled code of a PCRE regex is relocatable, that is, it
+ does not depend on memory location, the complete pcre data block is not
+ fully relocatable, because it may contain a copy of the tableptr argu-
+ ment, which is an address (see below).
+
+ The options argument contains various bit settings that affect the com-
+ pilation. It should be zero if no options are required. The available
+ options are described below. Some of them, in particular, those that
+ are compatible with Perl, can also be set and unset from within the
+ pattern (see the detailed description in the pcrepattern documenta-
+ tion). For these options, the contents of the options argument speci-
+ fies their initial settings at the start of compilation and execution.
+ The PCRE_ANCHORED and PCRE_NEWLINE_xxx options can be set at the time
+ of matching as well as at compile time.
+
+ If errptr is NULL, pcre_compile() returns NULL immediately. Otherwise,
+ if compilation of a pattern fails, pcre_compile() returns NULL, and
+ sets the variable pointed to by errptr to point to a textual error mes-
+ sage. This is a static string that is part of the library. You must not
+ try to free it. The offset from the start of the pattern to the charac-
+ ter where the error was discovered is placed in the variable pointed to
+ by erroffset, which must not be NULL. If it is, an immediate error is
+ given.
+
+ If pcre_compile2() is used instead of pcre_compile(), and the error-
+ codeptr argument is not NULL, a non-zero error code number is returned
+ via this argument in the event of an error. This is in addition to the
+ textual error message. Error codes and messages are listed below.
+
+ If the final argument, tableptr, is NULL, PCRE uses a default set of
+ character tables that are built when PCRE is compiled, using the
+ default C locale. Otherwise, tableptr must be an address that is the
+ result of a call to pcre_maketables(). This value is stored with the
+ compiled pattern, and used again by pcre_exec(), unless another table
+ pointer is passed to it. For more discussion, see the section on locale
+ support below.
+
+ This code fragment shows a typical straightforward call to pcre_com-
+ pile():
+
+ pcre *re;
+ const char *error;
+ int erroffset;
+ re = pcre_compile(
+ "^A.*Z", /* the pattern */
+ 0, /* default options */
+ &error, /* for error message */
+ &erroffset, /* for error offset */
+ NULL); /* use default character tables */
+
+ The following names for option bits are defined in the pcre.h header
+ file:
+
+ PCRE_ANCHORED
+
+ If this bit is set, the pattern is forced to be "anchored", that is, it
+ is constrained to match only at the first matching point in the string
+ that is being searched (the "subject string"). This effect can also be
+ achieved by appropriate constructs in the pattern itself, which is the
+ only way to do it in Perl.
+
+ PCRE_AUTO_CALLOUT
+
+ If this bit is set, pcre_compile() automatically inserts callout items,
+ all with number 255, before each pattern item. For discussion of the
+ callout facility, see the pcrecallout documentation.
+
+ PCRE_BSR_ANYCRLF
+ PCRE_BSR_UNICODE
+
+ These options (which are mutually exclusive) control what the \R escape
+ sequence matches. The choice is either to match only CR, LF, or CRLF,
+ or to match any Unicode newline sequence. The default is specified when
+ PCRE is built. It can be overridden from within the pattern, or by set-
+ ting an option when a compiled pattern is matched.
+
+ PCRE_CASELESS
+
+ If this bit is set, letters in the pattern match both upper and lower
+ case letters. It is equivalent to Perl's /i option, and it can be
+ changed within a pattern by a (?i) option setting. In UTF-8 mode, PCRE
+ always understands the concept of case for characters whose values are
+ less than 128, so caseless matching is always possible. For characters
+ with higher values, the concept of case is supported if PCRE is com-
+ piled with Unicode property support, but not otherwise. If you want to
+ use caseless matching for characters 128 and above, you must ensure
+ that PCRE is compiled with Unicode property support as well as with
+ UTF-8 support.
+
+ PCRE_DOLLAR_ENDONLY
+
+ If this bit is set, a dollar metacharacter in the pattern matches only
+ at the end of the subject string. Without this option, a dollar also
+ matches immediately before a newline at the end of the string (but not
+ before any other newlines). The PCRE_DOLLAR_ENDONLY option is ignored
+ if PCRE_MULTILINE is set. There is no equivalent to this option in
+ Perl, and no way to set it within a pattern.
+
+ PCRE_DOTALL
+
+ If this bit is set, a dot metacharater in the pattern matches all char-
+ acters, including those that indicate newline. Without it, a dot does
+ not match when the current position is at a newline. This option is
+ equivalent to Perl's /s option, and it can be changed within a pattern
+ by a (?s) option setting. A negative class such as [^a] always matches
+ newline characters, independent of the setting of this option.
+
+ PCRE_DUPNAMES
+
+ If this bit is set, names used to identify capturing subpatterns need
+ not be unique. This can be helpful for certain types of pattern when it
+ is known that only one instance of the named subpattern can ever be
+ matched. There are more details of named subpatterns below; see also
+ the pcrepattern documentation.
+
+ PCRE_EXTENDED
+
+ If this bit is set, whitespace data characters in the pattern are
+ totally ignored except when escaped or inside a character class. White-
+ space does not include the VT character (code 11). In addition, charac-
+ ters between an unescaped # outside a character class and the next new-
+ line, inclusive, are also ignored. This is equivalent to Perl's /x
+ option, and it can be changed within a pattern by a (?x) option set-
+ ting.
+
+ This option makes it possible to include comments inside complicated
+ patterns. Note, however, that this applies only to data characters.
+ Whitespace characters may never appear within special character
+ sequences in a pattern, for example within the sequence (?( which
+ introduces a conditional subpattern.
+
+ PCRE_EXTRA
+
+ This option was invented in order to turn on additional functionality
+ of PCRE that is incompatible with Perl, but it is currently of very
+ little use. When set, any backslash in a pattern that is followed by a
+ letter that has no special meaning causes an error, thus reserving
+ these combinations for future expansion. By default, as in Perl, a
+ backslash followed by a letter with no special meaning is treated as a
+ literal. (Perl can, however, be persuaded to give a warning for this.)
+ There are at present no other features controlled by this option. It
+ can also be set by a (?X) option setting within a pattern.
+
+ PCRE_FIRSTLINE
+
+ If this option is set, an unanchored pattern is required to match
+ before or at the first newline in the subject string, though the
+ matched text may continue over the newline.
+
+ PCRE_JAVASCRIPT_COMPAT
+
+ If this option is set, PCRE's behaviour is changed in some ways so that
+ it is compatible with JavaScript rather than Perl. The changes are as
+ follows:
+
+ (1) A lone closing square bracket in a pattern causes a compile-time
+ error, because this is illegal in JavaScript (by default it is treated
+ as a data character). Thus, the pattern AB]CD becomes illegal when this
+ option is set.
+
+ (2) At run time, a back reference to an unset subpattern group matches
+ an empty string (by default this causes the current matching alterna-
+ tive to fail). A pattern such as (\1)(a) succeeds when this option is
+ set (assuming it can find an "a" in the subject), whereas it fails by
+ default, for Perl compatibility.
+
+ PCRE_MULTILINE
+
+ By default, PCRE treats the subject string as consisting of a single
+ line of characters (even if it actually contains newlines). The "start
+ of line" metacharacter (^) matches only at the start of the string,
+ while the "end of line" metacharacter ($) matches only at the end of
+ the string, or before a terminating newline (unless PCRE_DOLLAR_ENDONLY
+ is set). This is the same as Perl.
+
+ When PCRE_MULTILINE it is set, the "start of line" and "end of line"
+ constructs match immediately following or immediately before internal
+ newlines in the subject string, respectively, as well as at the very
+ start and end. This is equivalent to Perl's /m option, and it can be
+ changed within a pattern by a (?m) option setting. If there are no new-
+ lines in a subject string, or no occurrences of ^ or $ in a pattern,
+ setting PCRE_MULTILINE has no effect.
+
+ PCRE_NEWLINE_CR
+ PCRE_NEWLINE_LF
+ PCRE_NEWLINE_CRLF
+ PCRE_NEWLINE_ANYCRLF
+ PCRE_NEWLINE_ANY
+
+ These options override the default newline definition that was chosen
+ when PCRE was built. Setting the first or the second specifies that a
+ newline is indicated by a single character (CR or LF, respectively).
+ Setting PCRE_NEWLINE_CRLF specifies that a newline is indicated by the
+ two-character CRLF sequence. Setting PCRE_NEWLINE_ANYCRLF specifies
+ that any of the three preceding sequences should be recognized. Setting
+ PCRE_NEWLINE_ANY specifies that any Unicode newline sequence should be
+ recognized. The Unicode newline sequences are the three just mentioned,
+ plus the single characters VT (vertical tab, U+000B), FF (formfeed,
+ U+000C), NEL (next line, U+0085), LS (line separator, U+2028), and PS
+ (paragraph separator, U+2029). The last two are recognized only in
+ UTF-8 mode.
+
+ The newline setting in the options word uses three bits that are
+ treated as a number, giving eight possibilities. Currently only six are
+ used (default plus the five values above). This means that if you set
+ more than one newline option, the combination may or may not be sensi-
+ ble. For example, PCRE_NEWLINE_CR with PCRE_NEWLINE_LF is equivalent to
+ PCRE_NEWLINE_CRLF, but other combinations may yield unused numbers and
+ cause an error.
+
+ The only time that a line break is specially recognized when compiling
+ a pattern is if PCRE_EXTENDED is set, and an unescaped # outside a
+ character class is encountered. This indicates a comment that lasts
+ until after the next line break sequence. In other circumstances, line
+ break sequences are treated as literal data, except that in
+ PCRE_EXTENDED mode, both CR and LF are treated as whitespace characters
+ and are therefore ignored.
+
+ The newline option that is set at compile time becomes the default that
+ is used for pcre_exec() and pcre_dfa_exec(), but it can be overridden.
+
+ PCRE_NO_AUTO_CAPTURE
+
+ If this option is set, it disables the use of numbered capturing paren-
+ theses in the pattern. Any opening parenthesis that is not followed by
+ ? behaves as if it were followed by ?: but named parentheses can still
+ be used for capturing (and they acquire numbers in the usual way).
+ There is no equivalent of this option in Perl.
+
+ PCRE_UNGREEDY
+
+ This option inverts the "greediness" of the quantifiers so that they
+ are not greedy by default, but become greedy if followed by "?". It is
+ not compatible with Perl. It can also be set by a (?U) option setting
+ within the pattern.
+
+ PCRE_UTF8
+
+ This option causes PCRE to regard both the pattern and the subject as
+ strings of UTF-8 characters instead of single-byte character strings.
+ However, it is available only when PCRE is built to include UTF-8 sup-
+ port. If not, the use of this option provokes an error. Details of how
+ this option changes the behaviour of PCRE are given in the section on
+ UTF-8 support in the main pcre page.
+
+ PCRE_NO_UTF8_CHECK
+
+ When PCRE_UTF8 is set, the validity of the pattern as a UTF-8 string is
+ automatically checked. There is a discussion about the validity of
+ UTF-8 strings in the main pcre page. If an invalid UTF-8 sequence of
+ bytes is found, pcre_compile() returns an error. If you already know
+ that your pattern is valid, and you want to skip this check for perfor-
+ mance reasons, you can set the PCRE_NO_UTF8_CHECK option. When it is
+ set, the effect of passing an invalid UTF-8 string as a pattern is
+ undefined. It may cause your program to crash. Note that this option
+ can also be passed to pcre_exec() and pcre_dfa_exec(), to suppress the
+ UTF-8 validity checking of subject strings.
+
+
+COMPILATION ERROR CODES
+
+ The following table lists the error codes than may be returned by
+ pcre_compile2(), along with the error messages that may be returned by
+ both compiling functions. As PCRE has developed, some error codes have
+ fallen out of use. To avoid confusion, they have not been re-used.
+
+ 0 no error
+ 1 \ at end of pattern
+ 2 \c at end of pattern
+ 3 unrecognized character follows \
+ 4 numbers out of order in {} quantifier
+ 5 number too big in {} quantifier
+ 6 missing terminating ] for character class
+ 7 invalid escape sequence in character class
+ 8 range out of order in character class
+ 9 nothing to repeat
+ 10 [this code is not in use]
+ 11 internal error: unexpected repeat
+ 12 unrecognized character after (? or (?-
+ 13 POSIX named classes are supported only within a class
+ 14 missing )
+ 15 reference to non-existent subpattern
+ 16 erroffset passed as NULL
+ 17 unknown option bit(s) set
+ 18 missing ) after comment
+ 19 [this code is not in use]
+ 20 regular expression is too large
+ 21 failed to get memory
+ 22 unmatched parentheses
+ 23 internal error: code overflow
+ 24 unrecognized character after (?<
+ 25 lookbehind assertion is not fixed length
+ 26 malformed number or name after (?(
+ 27 conditional group contains more than two branches
+ 28 assertion expected after (?(
+ 29 (?R or (?[+-]digits must be followed by )
+ 30 unknown POSIX class name
+ 31 POSIX collating elements are not supported
+ 32 this version of PCRE is not compiled with PCRE_UTF8 support
+ 33 [this code is not in use]
+ 34 character value in \x{...} sequence is too large
+ 35 invalid condition (?(0)
+ 36 \C not allowed in lookbehind assertion
+ 37 PCRE does not support \L, \l, \N, \U, or \u
+ 38 number after (?C is > 255
+ 39 closing ) for (?C expected
+ 40 recursive call could loop indefinitely
+ 41 unrecognized character after (?P
+ 42 syntax error in subpattern name (missing terminator)
+ 43 two named subpatterns have the same name
+ 44 invalid UTF-8 string
+ 45 support for \P, \p, and \X has not been compiled
+ 46 malformed \P or \p sequence
+ 47 unknown property name after \P or \p
+ 48 subpattern name is too long (maximum 32 characters)
+ 49 too many named subpatterns (maximum 10000)
+ 50 [this code is not in use]
+ 51 octal value is greater than \377 (not in UTF-8 mode)
+ 52 internal error: overran compiling workspace
+ 53 internal error: previously-checked referenced subpattern not
+ found
+ 54 DEFINE group contains more than one branch
+ 55 repeating a DEFINE group is not allowed
+ 56 inconsistent NEWLINE options
+ 57 \g is not followed by a braced, angle-bracketed, or quoted
+ name/number or by a plain number
+ 58 a numbered reference must not be zero
+ 59 (*VERB) with an argument is not supported
+ 60 (*VERB) not recognized
+ 61 number is too big
+ 62 subpattern name expected
+ 63 digit expected after (?+
+ 64 ] is an invalid data character in JavaScript compatibility mode
+
+ The numbers 32 and 10000 in errors 48 and 49 are defaults; different
+ values may be used if the limits were changed when PCRE was built.
+
+
+STUDYING A PATTERN
+
+ pcre_extra *pcre_study(const pcre *code, int options
+ const char **errptr);
+
+ If a compiled pattern is going to be used several times, it is worth
+ spending more time analyzing it in order to speed up the time taken for
+ matching. The function pcre_study() takes a pointer to a compiled pat-
+ tern as its first argument. If studying the pattern produces additional
+ information that will help speed up matching, pcre_study() returns a
+ pointer to a pcre_extra block, in which the study_data field points to
+ the results of the study.
+
+ The returned value from pcre_study() can be passed directly to
+ pcre_exec(). However, a pcre_extra block also contains other fields
+ that can be set by the caller before the block is passed; these are
+ described below in the section on matching a pattern.
+
+ If studying the pattern does not produce any additional information
+ pcre_study() returns NULL. In that circumstance, if the calling program
+ wants to pass any of the other fields to pcre_exec(), it must set up
+ its own pcre_extra block.
+
+ The second argument of pcre_study() contains option bits. At present,
+ no options are defined, and this argument should always be zero.
+
+ The third argument for pcre_study() is a pointer for an error message.
+ If studying succeeds (even if no data is returned), the variable it
+ points to is set to NULL. Otherwise it is set to point to a textual
+ error message. This is a static string that is part of the library. You
+ must not try to free it. You should test the error pointer for NULL
+ after calling pcre_study(), to be sure that it has run successfully.
+
+ This is a typical call to pcre_study():
+
+ pcre_extra *pe;
+ pe = pcre_study(
+ re, /* result of pcre_compile() */
+ 0, /* no options exist */
+ &error); /* set to NULL or points to a message */
+
+ At present, studying a pattern is useful only for non-anchored patterns
+ that do not have a single fixed starting character. A bitmap of possi-
+ ble starting bytes is created.
+
+
+LOCALE SUPPORT
+
+ PCRE handles caseless matching, and determines whether characters are
+ letters, digits, or whatever, by reference to a set of tables, indexed
+ by character value. When running in UTF-8 mode, this applies only to
+ characters with codes less than 128. Higher-valued codes never match
+ escapes such as \w or \d, but can be tested with \p if PCRE is built
+ with Unicode character property support. The use of locales with Uni-
+ code is discouraged. If you are handling characters with codes greater
+ than 128, you should either use UTF-8 and Unicode, or use locales, but
+ not try to mix the two.
+
+ PCRE contains an internal set of tables that are used when the final
+ argument of pcre_compile() is NULL. These are sufficient for many
+ applications. Normally, the internal tables recognize only ASCII char-
+ acters. However, when PCRE is built, it is possible to cause the inter-
+ nal tables to be rebuilt in the default "C" locale of the local system,
+ which may cause them to be different.
+
+ The internal tables can always be overridden by tables supplied by the
+ application that calls PCRE. These may be created in a different locale
+ from the default. As more and more applications change to using Uni-
+ code, the need for this locale support is expected to die away.
+
+ External tables are built by calling the pcre_maketables() function,
+ which has no arguments, in the relevant locale. The result can then be
+ passed to pcre_compile() or pcre_exec() as often as necessary. For
+ example, to build and use tables that are appropriate for the French
+ locale (where accented characters with values greater than 128 are
+ treated as letters), the following code could be used:
+
+ setlocale(LC_CTYPE, "fr_FR");
+ tables = pcre_maketables();
+ re = pcre_compile(..., tables);
+
+ The locale name "fr_FR" is used on Linux and other Unix-like systems;
+ if you are using Windows, the name for the French locale is "french".
+
+ When pcre_maketables() runs, the tables are built in memory that is
+ obtained via pcre_malloc. It is the caller's responsibility to ensure
+ that the memory containing the tables remains available for as long as
+ it is needed.
+
+ The pointer that is passed to pcre_compile() is saved with the compiled
+ pattern, and the same tables are used via this pointer by pcre_study()
+ and normally also by pcre_exec(). Thus, by default, for any single pat-
+ tern, compilation, studying and matching all happen in the same locale,
+ but different patterns can be compiled in different locales.
+
+ It is possible to pass a table pointer or NULL (indicating the use of
+ the internal tables) to pcre_exec(). Although not intended for this
+ purpose, this facility could be used to match a pattern in a different
+ locale from the one in which it was compiled. Passing table pointers at
+ run time is discussed below in the section on matching a pattern.
+
+
+INFORMATION ABOUT A PATTERN
+
+ int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
+ int what, void *where);
+
+ The pcre_fullinfo() function returns information about a compiled pat-
+ tern. It replaces the obsolete pcre_info() function, which is neverthe-
+ less retained for backwards compability (and is documented below).
+
+ The first argument for pcre_fullinfo() is a pointer to the compiled
+ pattern. The second argument is the result of pcre_study(), or NULL if
+ the pattern was not studied. The third argument specifies which piece
+ of information is required, and the fourth argument is a pointer to a
+ variable to receive the data. The yield of the function is zero for
+ success, or one of the following negative numbers:
+
+ PCRE_ERROR_NULL the argument code was NULL
+ the argument where was NULL
+ PCRE_ERROR_BADMAGIC the "magic number" was not found
+ PCRE_ERROR_BADOPTION the value of what was invalid
+
+ The "magic number" is placed at the start of each compiled pattern as
+ an simple check against passing an arbitrary memory pointer. Here is a
+ typical call of pcre_fullinfo(), to obtain the length of the compiled
+ pattern:
+
+ int rc;
+ size_t length;
+ rc = pcre_fullinfo(
+ re, /* result of pcre_compile() */
+ pe, /* result of pcre_study(), or NULL */
+ PCRE_INFO_SIZE, /* what is required */
+ &length); /* where to put the data */
+
+ The possible values for the third argument are defined in pcre.h, and
+ are as follows:
+
+ PCRE_INFO_BACKREFMAX
+
+ Return the number of the highest back reference in the pattern. The
+ fourth argument should point to an int variable. Zero is returned if
+ there are no back references.
+
+ PCRE_INFO_CAPTURECOUNT
+
+ Return the number of capturing subpatterns in the pattern. The fourth
+ argument should point to an int variable.
+
+ PCRE_INFO_DEFAULT_TABLES
+
+ Return a pointer to the internal default character tables within PCRE.
+ The fourth argument should point to an unsigned char * variable. This
+ information call is provided for internal use by the pcre_study() func-
+ tion. External callers can cause PCRE to use its internal tables by
+ passing a NULL table pointer.
+
+ PCRE_INFO_FIRSTBYTE
+
+ Return information about the first byte of any matched string, for a
+ non-anchored pattern. The fourth argument should point to an int vari-
+ able. (This option used to be called PCRE_INFO_FIRSTCHAR; the old name
+ is still recognized for backwards compatibility.)
+
+ If there is a fixed first byte, for example, from a pattern such as
+ (cat|cow|coyote), its value is returned. Otherwise, if either
+
+ (a) the pattern was compiled with the PCRE_MULTILINE option, and every
+ branch starts with "^", or
+
+ (b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not
+ set (if it were set, the pattern would be anchored),
+
+ -1 is returned, indicating that the pattern matches only at the start
+ of a subject string or after any newline within the string. Otherwise
+ -2 is returned. For anchored patterns, -2 is returned.
+
+ PCRE_INFO_FIRSTTABLE
+
+ If the pattern was studied, and this resulted in the construction of a
+ 256-bit table indicating a fixed set of bytes for the first byte in any
+ matching string, a pointer to the table is returned. Otherwise NULL is
+ returned. The fourth argument should point to an unsigned char * vari-
+ able.
+
+ PCRE_INFO_HASCRORLF
+
+ Return 1 if the pattern contains any explicit matches for CR or LF
+ characters, otherwise 0. The fourth argument should point to an int
+ variable. An explicit match is either a literal CR or LF character, or
+ \r or \n.
+
+ PCRE_INFO_JCHANGED
+
+ Return 1 if the (?J) or (?-J) option setting is used in the pattern,
+ otherwise 0. The fourth argument should point to an int variable. (?J)
+ and (?-J) set and unset the local PCRE_DUPNAMES option, respectively.
+
+ PCRE_INFO_LASTLITERAL
+
+ Return the value of the rightmost literal byte that must exist in any
+ matched string, other than at its start, if such a byte has been
+ recorded. The fourth argument should point to an int variable. If there
+ is no such byte, -1 is returned. For anchored patterns, a last literal
+ byte is recorded only if it follows something of variable length. For
+ example, for the pattern /^a\d+z\d+/ the returned value is "z", but for
+ /^a\dz\d/ the returned value is -1.
+
+ PCRE_INFO_NAMECOUNT
+ PCRE_INFO_NAMEENTRYSIZE
+ PCRE_INFO_NAMETABLE
+
+ PCRE supports the use of named as well as numbered capturing parenthe-
+ ses. The names are just an additional way of identifying the parenthe-
+ ses, which still acquire numbers. Several convenience functions such as
+ pcre_get_named_substring() are provided for extracting captured sub-
+ strings by name. It is also possible to extract the data directly, by
+ first converting the name to a number in order to access the correct
+ pointers in the output vector (described with pcre_exec() below). To do
+ the conversion, you need to use the name-to-number map, which is
+ described by these three values.
+
+ The map consists of a number of fixed-size entries. PCRE_INFO_NAMECOUNT
+ gives the number of entries, and PCRE_INFO_NAMEENTRYSIZE gives the size
+ of each entry; both of these return an int value. The entry size
+ depends on the length of the longest name. PCRE_INFO_NAMETABLE returns
+ a pointer to the first entry of the table (a pointer to char). The
+ first two bytes of each entry are the number of the capturing parenthe-
+ sis, most significant byte first. The rest of the entry is the corre-
+ sponding name, zero terminated. The names are in alphabetical order.
+ When PCRE_DUPNAMES is set, duplicate names are in order of their paren-
+ theses numbers. For example, consider the following pattern (assume
+ PCRE_EXTENDED is set, so white space - including newlines - is
+ ignored):
+
+ (?<date> (?<year>(\d\d)?\d\d) -
+ (?<month>\d\d) - (?<day>\d\d) )
+
+ There are four named subpatterns, so the table has four entries, and
+ each entry in the table is eight bytes long. The table is as follows,
+ with non-printing bytes shows in hexadecimal, and undefined bytes shown
+ as ??:
+
+ 00 01 d a t e 00 ??
+ 00 05 d a y 00 ?? ??
+ 00 04 m o n t h 00
+ 00 02 y e a r 00 ??
+
+ When writing code to extract data from named subpatterns using the
+ name-to-number map, remember that the length of the entries is likely
+ to be different for each compiled pattern.
+
+ PCRE_INFO_OKPARTIAL
+
+ Return 1 if the pattern can be used for partial matching, otherwise 0.
+ The fourth argument should point to an int variable. The pcrepartial
+ documentation lists the restrictions that apply to patterns when par-
+ tial matching is used.
+
+ PCRE_INFO_OPTIONS
+
+ Return a copy of the options with which the pattern was compiled. The
+ fourth argument should point to an unsigned long int variable. These
+ option bits are those specified in the call to pcre_compile(), modified
+ by any top-level option settings at the start of the pattern itself. In
+ other words, they are the options that will be in force when matching
+ starts. For example, if the pattern /(?im)abc(?-i)d/ is compiled with
+ the PCRE_EXTENDED option, the result is PCRE_CASELESS, PCRE_MULTILINE,
+ and PCRE_EXTENDED.
+
+ A pattern is automatically anchored by PCRE if all of its top-level
+ alternatives begin with one of the following:
+
+ ^ unless PCRE_MULTILINE is set
+ \A always
+ \G always
+ .* if PCRE_DOTALL is set and there are no back
+ references to the subpattern in which .* appears
+
+ For such patterns, the PCRE_ANCHORED bit is set in the options returned
+ by pcre_fullinfo().
+
+ PCRE_INFO_SIZE
+
+ Return the size of the compiled pattern, that is, the value that was
+ passed as the argument to pcre_malloc() when PCRE was getting memory in
+ which to place the compiled data. The fourth argument should point to a
+ size_t variable.
+
+ PCRE_INFO_STUDYSIZE
+
+ Return the size of the data block pointed to by the study_data field in
+ a pcre_extra block. That is, it is the value that was passed to
+ pcre_malloc() when PCRE was getting memory into which to place the data
+ created by pcre_study(). The fourth argument should point to a size_t
+ variable.
+
+
+OBSOLETE INFO FUNCTION
+
+ int pcre_info(const pcre *code, int *optptr, int *firstcharptr);
+
+ The pcre_info() function is now obsolete because its interface is too
+ restrictive to return all the available data about a compiled pattern.
+ New programs should use pcre_fullinfo() instead. The yield of
+ pcre_info() is the number of capturing subpatterns, or one of the fol-
+ lowing negative numbers:
+
+ PCRE_ERROR_NULL the argument code was NULL
+ PCRE_ERROR_BADMAGIC the "magic number" was not found
+
+ If the optptr argument is not NULL, a copy of the options with which
+ the pattern was compiled is placed in the integer it points to (see
+ PCRE_INFO_OPTIONS above).
+
+ If the pattern is not anchored and the firstcharptr argument is not
+ NULL, it is used to pass back information about the first character of
+ any matched string (see PCRE_INFO_FIRSTBYTE above).
+
+
+REFERENCE COUNTS
+
+ int pcre_refcount(pcre *code, int adjust);
+
+ The pcre_refcount() function is used to maintain a reference count in
+ the data block that contains a compiled pattern. It is provided for the
+ benefit of applications that operate in an object-oriented manner,
+ where different parts of the application may be using the same compiled
+ pattern, but you want to free the block when they are all done.
+
+ When a pattern is compiled, the reference count field is initialized to
+ zero. It is changed only by calling this function, whose action is to
+ add the adjust value (which may be positive or negative) to it. The
+ yield of the function is the new value. However, the value of the count
+ is constrained to lie between 0 and 65535, inclusive. If the new value
+ is outside these limits, it is forced to the appropriate limit value.
+
+ Except when it is zero, the reference count is not correctly preserved
+ if a pattern is compiled on one host and then transferred to a host
+ whose byte-order is different. (This seems a highly unlikely scenario.)
+
+
+MATCHING A PATTERN: THE TRADITIONAL FUNCTION
+
+ int pcre_exec(const pcre *code, const pcre_extra *extra,
+ const char *subject, int length, int startoffset,
+ int options, int *ovector, int ovecsize);
+
+ The function pcre_exec() is called to match a subject string against a
+ compiled pattern, which is passed in the code argument. If the pattern
+ has been studied, the result of the study should be passed in the extra
+ argument. This function is the main matching facility of the library,
+ and it operates in a Perl-like manner. For specialist use there is also
+ an alternative matching function, which is described below in the sec-
+ tion about the pcre_dfa_exec() function.
+
+ In most applications, the pattern will have been compiled (and option-
+ ally studied) in the same process that calls pcre_exec(). However, it
+ is possible to save compiled patterns and study data, and then use them
+ later in different processes, possibly even on different hosts. For a
+ discussion about this, see the pcreprecompile documentation.
+
+ Here is an example of a simple call to pcre_exec():
+
+ int rc;
+ int ovector[30];
+ rc = pcre_exec(
+ re, /* result of pcre_compile() */
+ NULL, /* we didn't study the pattern */
+ "some string", /* the subject string */
+ 11, /* the length of the subject string */
+ 0, /* start at offset 0 in the subject */
+ 0, /* default options */
+ ovector, /* vector of integers for substring information */
+ 30); /* number of elements (NOT size in bytes) */
+
+ Extra data for pcre_exec()
+
+ If the extra argument is not NULL, it must point to a pcre_extra data
+ block. The pcre_study() function returns such a block (when it doesn't
+ return NULL), but you can also create one for yourself, and pass addi-
+ tional information in it. The pcre_extra block contains the following
+ fields (not necessarily in this order):
+
+ unsigned long int flags;
+ void *study_data;
+ unsigned long int match_limit;
+ unsigned long int match_limit_recursion;
+ void *callout_data;
+ const unsigned char *tables;
+
+ The flags field is a bitmap that specifies which of the other fields
+ are set. The flag bits are:
+
+ PCRE_EXTRA_STUDY_DATA
+ PCRE_EXTRA_MATCH_LIMIT
+ PCRE_EXTRA_MATCH_LIMIT_RECURSION
+ PCRE_EXTRA_CALLOUT_DATA
+ PCRE_EXTRA_TABLES
+
+ Other flag bits should be set to zero. The study_data field is set in
+ the pcre_extra block that is returned by pcre_study(), together with
+ the appropriate flag bit. You should not set this yourself, but you may
+ add to the block by setting the other fields and their corresponding
+ flag bits.
+
+ The match_limit field provides a means of preventing PCRE from using up
+ a vast amount of resources when running patterns that are not going to
+ match, but which have a very large number of possibilities in their
+ search trees. The classic example is the use of nested unlimited
+ repeats.
+
+ Internally, PCRE uses a function called match() which it calls repeat-
+ edly (sometimes recursively). The limit set by match_limit is imposed
+ on the number of times this function is called during a match, which
+ has the effect of limiting the amount of backtracking that can take
+ place. For patterns that are not anchored, the count restarts from zero
+ for each position in the subject string.
+
+ The default value for the limit can be set when PCRE is built; the
+ default default is 10 million, which handles all but the most extreme
+ cases. You can override the default by suppling pcre_exec() with a
+ pcre_extra block in which match_limit is set, and
+ PCRE_EXTRA_MATCH_LIMIT is set in the flags field. If the limit is
+ exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
+
+ The match_limit_recursion field is similar to match_limit, but instead
+ of limiting the total number of times that match() is called, it limits
+ the depth of recursion. The recursion depth is a smaller number than
+ the total number of calls, because not all calls to match() are recur-
+ sive. This limit is of use only if it is set smaller than match_limit.
+
+ Limiting the recursion depth limits the amount of stack that can be
+ used, or, when PCRE has been compiled to use memory on the heap instead
+ of the stack, the amount of heap memory that can be used.
+
+ The default value for match_limit_recursion can be set when PCRE is
+ built; the default default is the same value as the default for
+ match_limit. You can override the default by suppling pcre_exec() with
+ a pcre_extra block in which match_limit_recursion is set, and
+ PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the flags field. If the
+ limit is exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.
+
+ The pcre_callout field is used in conjunction with the "callout" fea-
+ ture, which is described in the pcrecallout documentation.
+
+ The tables field is used to pass a character tables pointer to
+ pcre_exec(); this overrides the value that is stored with the compiled
+ pattern. A non-NULL value is stored with the compiled pattern only if
+ custom tables were supplied to pcre_compile() via its tableptr argu-
+ ment. If NULL is passed to pcre_exec() using this mechanism, it forces
+ PCRE's internal tables to be used. This facility is helpful when re-
+ using patterns that have been saved after compiling with an external
+ set of tables, because the external tables might be at a different
+ address when pcre_exec() is called. See the pcreprecompile documenta-
+ tion for a discussion of saving compiled patterns for later use.
+
+ Option bits for pcre_exec()
+
+ The unused bits of the options argument for pcre_exec() must be zero.
+ The only bits that may be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx,
+ PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK and
+ PCRE_PARTIAL.
+
+ PCRE_ANCHORED
+
+ The PCRE_ANCHORED option limits pcre_exec() to matching at the first
+ matching position. If a pattern was compiled with PCRE_ANCHORED, or
+ turned out to be anchored by virtue of its contents, it cannot be made
+ unachored at matching time.
+
+ PCRE_BSR_ANYCRLF
+ PCRE_BSR_UNICODE
+
+ These options (which are mutually exclusive) control what the \R escape
+ sequence matches. The choice is either to match only CR, LF, or CRLF,
+ or to match any Unicode newline sequence. These options override the
+ choice that was made or defaulted when the pattern was compiled.
+
+ PCRE_NEWLINE_CR
+ PCRE_NEWLINE_LF
+ PCRE_NEWLINE_CRLF
+ PCRE_NEWLINE_ANYCRLF
+ PCRE_NEWLINE_ANY
+
+ These options override the newline definition that was chosen or
+ defaulted when the pattern was compiled. For details, see the descrip-
+ tion of pcre_compile() above. During matching, the newline choice
+ affects the behaviour of the dot, circumflex, and dollar metacharac-
+ ters. It may also alter the way the match position is advanced after a
+ match failure for an unanchored pattern.
+
+ When PCRE_NEWLINE_CRLF, PCRE_NEWLINE_ANYCRLF, or PCRE_NEWLINE_ANY is
+ set, and a match attempt for an unanchored pattern fails when the cur-
+ rent position is at a CRLF sequence, and the pattern contains no
+ explicit matches for CR or LF characters, the match position is
+ advanced by two characters instead of one, in other words, to after the
+ CRLF.
+
+ The above rule is a compromise that makes the most common cases work as
+ expected. For example, if the pattern is .+A (and the PCRE_DOTALL
+ option is not set), it does not match the string "\r\nA" because, after
+ failing at the start, it skips both the CR and the LF before retrying.
+ However, the pattern [\r\n]A does match that string, because it con-
+ tains an explicit CR or LF reference, and so advances only by one char-
+ acter after the first failure.
+
+ An explicit match for CR of LF is either a literal appearance of one of
+ those characters, or one of the \r or \n escape sequences. Implicit
+ matches such as [^X] do not count, nor does \s (which includes CR and
+ LF in the characters that it matches).
+
+ Notwithstanding the above, anomalous effects may still occur when CRLF
+ is a valid newline sequence and explicit \r or \n escapes appear in the
+ pattern.
+
+ PCRE_NOTBOL
+
+ This option specifies that first character of the subject string is not
+ the beginning of a line, so the circumflex metacharacter should not
+ match before it. Setting this without PCRE_MULTILINE (at compile time)
+ causes circumflex never to match. This option affects only the behav-
+ iour of the circumflex metacharacter. It does not affect \A.
+
+ PCRE_NOTEOL
+
+ This option specifies that the end of the subject string is not the end
+ of a line, so the dollar metacharacter should not match it nor (except
+ in multiline mode) a newline immediately before it. Setting this with-
+ out PCRE_MULTILINE (at compile time) causes dollar never to match. This
+ option affects only the behaviour of the dollar metacharacter. It does
+ not affect \Z or \z.
+
+ PCRE_NOTEMPTY
+
+ An empty string is not considered to be a valid match if this option is
+ set. If there are alternatives in the pattern, they are tried. If all
+ the alternatives match the empty string, the entire match fails. For
+ example, if the pattern
+
+ a?b?
+
+ is applied to a string not beginning with "a" or "b", it matches the
+ empty string at the start of the subject. With PCRE_NOTEMPTY set, this
+ match is not valid, so PCRE searches further into the string for occur-
+ rences of "a" or "b".
+
+ Perl has no direct equivalent of PCRE_NOTEMPTY, but it does make a spe-
+ cial case of a pattern match of the empty string within its split()
+ function, and when using the /g modifier. It is possible to emulate
+ Perl's behaviour after matching a null string by first trying the match
+ again at the same offset with PCRE_NOTEMPTY and PCRE_ANCHORED, and then
+ if that fails by advancing the starting offset (see below) and trying
+ an ordinary match again. There is some code that demonstrates how to do
+ this in the pcredemo.c sample program.
+
+ PCRE_NO_UTF8_CHECK
+
+ When PCRE_UTF8 is set at compile time, the validity of the subject as a
+ UTF-8 string is automatically checked when pcre_exec() is subsequently
+ called. The value of startoffset is also checked to ensure that it
+ points to the start of a UTF-8 character. There is a discussion about
+ the validity of UTF-8 strings in the section on UTF-8 support in the
+ main pcre page. If an invalid UTF-8 sequence of bytes is found,
+ pcre_exec() returns the error PCRE_ERROR_BADUTF8. If startoffset con-
+ tains an invalid value, PCRE_ERROR_BADUTF8_OFFSET is returned.
+
+ If you already know that your subject is valid, and you want to skip
+ these checks for performance reasons, you can set the
+ PCRE_NO_UTF8_CHECK option when calling pcre_exec(). You might want to
+ do this for the second and subsequent calls to pcre_exec() if you are
+ making repeated calls to find all the matches in a single subject
+ string. However, you should be sure that the value of startoffset
+ points to the start of a UTF-8 character. When PCRE_NO_UTF8_CHECK is
+ set, the effect of passing an invalid UTF-8 string as a subject, or a
+ value of startoffset that does not point to the start of a UTF-8 char-
+ acter, is undefined. Your program may crash.
+
+ PCRE_PARTIAL
+
+ This option turns on the partial matching feature. If the subject
+ string fails to match the pattern, but at some point during the match-
+ ing process the end of the subject was reached (that is, the subject
+ partially matches the pattern and the failure to match occurred only
+ because there were not enough subject characters), pcre_exec() returns
+ PCRE_ERROR_PARTIAL instead of PCRE_ERROR_NOMATCH. When PCRE_PARTIAL is
+ used, there are restrictions on what may appear in the pattern. These
+ are discussed in the pcrepartial documentation.
+
+ The string to be matched by pcre_exec()
+
+ The subject string is passed to pcre_exec() as a pointer in subject, a
+ length (in bytes) in length, and a starting byte offset in startoffset.
+ In UTF-8 mode, the byte offset must point to the start of a UTF-8 char-
+ acter. Unlike the pattern string, the subject may contain binary zero
+ bytes. When the starting offset is zero, the search for a match starts
+ at the beginning of the subject, and this is by far the most common
+ case.
+
+ A non-zero starting offset is useful when searching for another match
+ in the same subject by calling pcre_exec() again after a previous suc-
+ cess. Setting startoffset differs from just passing over a shortened
+ string and setting PCRE_NOTBOL in the case of a pattern that begins
+ with any kind of lookbehind. For example, consider the pattern
+
+ \Biss\B
+
+ which finds occurrences of "iss" in the middle of words. (\B matches
+ only if the current position in the subject is not a word boundary.)
+ When applied to the string "Mississipi" the first call to pcre_exec()
+ finds the first occurrence. If pcre_exec() is called again with just
+ the remainder of the subject, namely "issipi", it does not match,
+ because \B is always false at the start of the subject, which is deemed
+ to be a word boundary. However, if pcre_exec() is passed the entire
+ string again, but with startoffset set to 4, it finds the second occur-
+ rence of "iss" because it is able to look behind the starting point to
+ discover that it is preceded by a letter.
+
+ If a non-zero starting offset is passed when the pattern is anchored,
+ one attempt to match at the given offset is made. This can only succeed
+ if the pattern does not require the match to be at the start of the
+ subject.
+
+ How pcre_exec() returns captured substrings
+
+ In general, a pattern matches a certain portion of the subject, and in
+ addition, further substrings from the subject may be picked out by
+ parts of the pattern. Following the usage in Jeffrey Friedl's book,
+ this is called "capturing" in what follows, and the phrase "capturing
+ subpattern" is used for a fragment of a pattern that picks out a sub-
+ string. PCRE supports several other kinds of parenthesized subpattern
+ that do not cause substrings to be captured.
+
+ Captured substrings are returned to the caller via a vector of integers
+ whose address is passed in ovector. The number of elements in the vec-
+ tor is passed in ovecsize, which must be a non-negative number. Note:
+ this argument is NOT the size of ovector in bytes.
+
+ The first two-thirds of the vector is used to pass back captured sub-
+ strings, each substring using a pair of integers. The remaining third
+ of the vector is used as workspace by pcre_exec() while matching cap-
+ turing subpatterns, and is not available for passing back information.
+ The number passed in ovecsize should always be a multiple of three. If
+ it is not, it is rounded down.
+
+ When a match is successful, information about captured substrings is
+ returned in pairs of integers, starting at the beginning of ovector,
+ and continuing up to two-thirds of its length at the most. The first
+ element of each pair is set to the byte offset of the first character
+ in a substring, and the second is set to the byte offset of the first
+ character after the end of a substring. Note: these values are always
+ byte offsets, even in UTF-8 mode. They are not character counts.
+
+ The first pair of integers, ovector[0] and ovector[1], identify the
+ portion of the subject string matched by the entire pattern. The next
+ pair is used for the first capturing subpattern, and so on. The value
+ returned by pcre_exec() is one more than the highest numbered pair that
+ has been set. For example, if two substrings have been captured, the
+ returned value is 3. If there are no capturing subpatterns, the return
+ value from a successful match is 1, indicating that just the first pair
+ of offsets has been set.
+
+ If a capturing subpattern is matched repeatedly, it is the last portion
+ of the string that it matched that is returned.
+
+ If the vector is too small to hold all the captured substring offsets,
+ it is used as far as possible (up to two-thirds of its length), and the
+ function returns a value of zero. If the substring offsets are not of
+ interest, pcre_exec() may be called with ovector passed as NULL and
+ ovecsize as zero. However, if the pattern contains back references and
+ the ovector is not big enough to remember the related substrings, PCRE
+ has to get additional memory for use during matching. Thus it is usu-
+ ally advisable to supply an ovector.
+
+ The pcre_info() function can be used to find out how many capturing
+ subpatterns there are in a compiled pattern. The smallest size for
+ ovector that will allow for n captured substrings, in addition to the
+ offsets of the substring matched by the whole pattern, is (n+1)*3.
+
+ It is possible for capturing subpattern number n+1 to match some part
+ of the subject when subpattern n has not been used at all. For example,
+ if the string "abc" is matched against the pattern (a|(z))(bc) the
+ return from the function is 4, and subpatterns 1 and 3 are matched, but
+ 2 is not. When this happens, both values in the offset pairs corre-
+ sponding to unused subpatterns are set to -1.
+
+ Offset values that correspond to unused subpatterns at the end of the
+ expression are also set to -1. For example, if the string "abc" is
+ matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are not
+ matched. The return from the function is 2, because the highest used
+ capturing subpattern number is 1. However, you can refer to the offsets
+ for the second and third capturing subpatterns if you wish (assuming
+ the vector is large enough, of course).
+
+ Some convenience functions are provided for extracting the captured
+ substrings as separate strings. These are described below.
+
+ Error return values from pcre_exec()
+
+ If pcre_exec() fails, it returns a negative number. The following are
+ defined in the header file:
+
+ PCRE_ERROR_NOMATCH (-1)
+
+ The subject string did not match the pattern.
+
+ PCRE_ERROR_NULL (-2)
+
+ Either code or subject was passed as NULL, or ovector was NULL and
+ ovecsize was not zero.
+
+ PCRE_ERROR_BADOPTION (-3)
+
+ An unrecognized bit was set in the options argument.
+
+ PCRE_ERROR_BADMAGIC (-4)
+
+ PCRE stores a 4-byte "magic number" at the start of the compiled code,
+ to catch the case when it is passed a junk pointer and to detect when a
+ pattern that was compiled in an environment of one endianness is run in
+ an environment with the other endianness. This is the error that PCRE
+ gives when the magic number is not present.
+
+ PCRE_ERROR_UNKNOWN_OPCODE (-5)
+
+ While running the pattern match, an unknown item was encountered in the
+ compiled pattern. This error could be caused by a bug in PCRE or by
+ overwriting of the compiled pattern.
+
+ PCRE_ERROR_NOMEMORY (-6)
+
+ If a pattern contains back references, but the ovector that is passed
+ to pcre_exec() is not big enough to remember the referenced substrings,
+ PCRE gets a block of memory at the start of matching to use for this
+ purpose. If the call via pcre_malloc() fails, this error is given. The
+ memory is automatically freed at the end of matching.
+
+ PCRE_ERROR_NOSUBSTRING (-7)
+
+ This error is used by the pcre_copy_substring(), pcre_get_substring(),
+ and pcre_get_substring_list() functions (see below). It is never
+ returned by pcre_exec().
+
+ PCRE_ERROR_MATCHLIMIT (-8)
+
+ The backtracking limit, as specified by the match_limit field in a
+ pcre_extra structure (or defaulted) was reached. See the description
+ above.
+
+ PCRE_ERROR_CALLOUT (-9)
+
+ This error is never generated by pcre_exec() itself. It is provided for
+ use by callout functions that want to yield a distinctive error code.
+ See the pcrecallout documentation for details.
+
+ PCRE_ERROR_BADUTF8 (-10)
+
+ A string that contains an invalid UTF-8 byte sequence was passed as a
+ subject.
+
+ PCRE_ERROR_BADUTF8_OFFSET (-11)
+
+ The UTF-8 byte sequence that was passed as a subject was valid, but the
+ value of startoffset did not point to the beginning of a UTF-8 charac-
+ ter.
+
+ PCRE_ERROR_PARTIAL (-12)
+
+ The subject string did not match, but it did match partially. See the
+ pcrepartial documentation for details of partial matching.
+
+ PCRE_ERROR_BADPARTIAL (-13)
+
+ The PCRE_PARTIAL option was used with a compiled pattern containing
+ items that are not supported for partial matching. See the pcrepartial
+ documentation for details of partial matching.
+
+ PCRE_ERROR_INTERNAL (-14)
+
+ An unexpected internal error has occurred. This error could be caused
+ by a bug in PCRE or by overwriting of the compiled pattern.
+
+ PCRE_ERROR_BADCOUNT (-15)
+
+ This error is given if the value of the ovecsize argument is negative.
+
+ PCRE_ERROR_RECURSIONLIMIT (-21)
+
+ The internal recursion limit, as specified by the match_limit_recursion
+ field in a pcre_extra structure (or defaulted) was reached. See the
+ description above.
+
+ PCRE_ERROR_BADNEWLINE (-23)
+
+ An invalid combination of PCRE_NEWLINE_xxx options was given.
+
+ Error numbers -16 to -20 and -22 are not used by pcre_exec().
+
+
+EXTRACTING CAPTURED SUBSTRINGS BY NUMBER
+
+ int pcre_copy_substring(const char *subject, int *ovector,
+ int stringcount, int stringnumber, char *buffer,
+ int buffersize);
+
+ int pcre_get_substring(const char *subject, int *ovector,
+ int stringcount, int stringnumber,
+ const char **stringptr);
+
+ int pcre_get_substring_list(const char *subject,
+ int *ovector, int stringcount, const char ***listptr);
+
+ Captured substrings can be accessed directly by using the offsets
+ returned by pcre_exec() in ovector. For convenience, the functions
+ pcre_copy_substring(), pcre_get_substring(), and pcre_get_sub-
+ string_list() are provided for extracting captured substrings as new,
+ separate, zero-terminated strings. These functions identify substrings
+ by number. The next section describes functions for extracting named
+ substrings.
+
+ A substring that contains a binary zero is correctly extracted and has
+ a further zero added on the end, but the result is not, of course, a C
+ string. However, you can process such a string by referring to the
+ length that is returned by pcre_copy_substring() and pcre_get_sub-
+ string(). Unfortunately, the interface to pcre_get_substring_list() is
+ not adequate for handling strings containing binary zeros, because the
+ end of the final string is not independently indicated.
+
+ The first three arguments are the same for all three of these func-
+ tions: subject is the subject string that has just been successfully
+ matched, ovector is a pointer to the vector of integer offsets that was
+ passed to pcre_exec(), and stringcount is the number of substrings that
+ were captured by the match, including the substring that matched the
+ entire regular expression. This is the value returned by pcre_exec() if
+ it is greater than zero. If pcre_exec() returned zero, indicating that
+ it ran out of space in ovector, the value passed as stringcount should
+ be the number of elements in the vector divided by three.
+
+ The functions pcre_copy_substring() and pcre_get_substring() extract a
+ single substring, whose number is given as stringnumber. A value of
+ zero extracts the substring that matched the entire pattern, whereas
+ higher values extract the captured substrings. For pcre_copy_sub-
+ string(), the string is placed in buffer, whose length is given by
+ buffersize, while for pcre_get_substring() a new block of memory is
+ obtained via pcre_malloc, and its address is returned via stringptr.
+ The yield of the function is the length of the string, not including
+ the terminating zero, or one of these error codes:
+
+ PCRE_ERROR_NOMEMORY (-6)
+
+ The buffer was too small for pcre_copy_substring(), or the attempt to
+ get memory failed for pcre_get_substring().
+
+ PCRE_ERROR_NOSUBSTRING (-7)
+
+ There is no substring whose number is stringnumber.
+
+ The pcre_get_substring_list() function extracts all available sub-
+ strings and builds a list of pointers to them. All this is done in a
+ single block of memory that is obtained via pcre_malloc. The address of
+ the memory block is returned via listptr, which is also the start of
+ the list of string pointers. The end of the list is marked by a NULL
+ pointer. The yield of the function is zero if all went well, or the
+ error code
+
+ PCRE_ERROR_NOMEMORY (-6)
+
+ if the attempt to get the memory block failed.
+
+ When any of these functions encounter a substring that is unset, which
+ can happen when capturing subpattern number n+1 matches some part of
+ the subject, but subpattern n has not been used at all, they return an
+ empty string. This can be distinguished from a genuine zero-length sub-
+ string by inspecting the appropriate offset in ovector, which is nega-
+ tive for unset substrings.
+
+ The two convenience functions pcre_free_substring() and pcre_free_sub-
+ string_list() can be used to free the memory returned by a previous
+ call of pcre_get_substring() or pcre_get_substring_list(), respec-
+ tively. They do nothing more than call the function pointed to by
+ pcre_free, which of course could be called directly from a C program.
+ However, PCRE is used in some situations where it is linked via a spe-
+ cial interface to another programming language that cannot use
+ pcre_free directly; it is for these cases that the functions are pro-
+ vided.
+
+
+EXTRACTING CAPTURED SUBSTRINGS BY NAME
+
+ int pcre_get_stringnumber(const pcre *code,
+ const char *name);
+
+ int pcre_copy_named_substring(const pcre *code,
+ const char *subject, int *ovector,
+ int stringcount, const char *stringname,
+ char *buffer, int buffersize);
+
+ int pcre_get_named_substring(const pcre *code,
+ const char *subject, int *ovector,
+ int stringcount, const char *stringname,
+ const char **stringptr);
+
+ To extract a substring by name, you first have to find associated num-
+ ber. For example, for this pattern
+
+ (a+)b(?<xxx>\d+)...
+
+ the number of the subpattern called "xxx" is 2. If the name is known to
+ be unique (PCRE_DUPNAMES was not set), you can find the number from the
+ name by calling pcre_get_stringnumber(). The first argument is the com-
+ piled pattern, and the second is the name. The yield of the function is
+ the subpattern number, or PCRE_ERROR_NOSUBSTRING (-7) if there is no
+ subpattern of that name.
+
+ Given the number, you can extract the substring directly, or use one of
+ the functions described in the previous section. For convenience, there
+ are also two functions that do the whole job.
+
+ Most of the arguments of pcre_copy_named_substring() and
+ pcre_get_named_substring() are the same as those for the similarly
+ named functions that extract by number. As these are described in the
+ previous section, they are not re-described here. There are just two
+ differences:
+
+ First, instead of a substring number, a substring name is given. Sec-
+ ond, there is an extra argument, given at the start, which is a pointer
+ to the compiled pattern. This is needed in order to gain access to the
+ name-to-number translation table.
+
+ These functions call pcre_get_stringnumber(), and if it succeeds, they
+ then call pcre_copy_substring() or pcre_get_substring(), as appropri-
+ ate. NOTE: If PCRE_DUPNAMES is set and there are duplicate names, the
+ behaviour may not be what you want (see the next section).
+
+
+DUPLICATE SUBPATTERN NAMES
+
+ int pcre_get_stringtable_entries(const pcre *code,
+ const char *name, char **first, char **last);
+
+ When a pattern is compiled with the PCRE_DUPNAMES option, names for
+ subpatterns are not required to be unique. Normally, patterns with
+ duplicate names are such that in any one match, only one of the named
+ subpatterns participates. An example is shown in the pcrepattern docu-
+ mentation.
+
+ When duplicates are present, pcre_copy_named_substring() and
+ pcre_get_named_substring() return the first substring corresponding to
+ the given name that is set. If none are set, PCRE_ERROR_NOSUBSTRING
+ (-7) is returned; no data is returned. The pcre_get_stringnumber()
+ function returns one of the numbers that are associated with the name,
+ but it is not defined which it is.
+
+ If you want to get full details of all captured substrings for a given
+ name, you must use the pcre_get_stringtable_entries() function. The
+ first argument is the compiled pattern, and the second is the name. The
+ third and fourth are pointers to variables which are updated by the
+ function. After it has run, they point to the first and last entries in
+ the name-to-number table for the given name. The function itself
+ returns the length of each entry, or PCRE_ERROR_NOSUBSTRING (-7) if
+ there are none. The format of the table is described above in the sec-
+ tion entitled Information about a pattern. Given all the relevant
+ entries for the name, you can extract each of their numbers, and hence
+ the captured data, if any.
+
+
+FINDING ALL POSSIBLE MATCHES
+
+ The traditional matching function uses a similar algorithm to Perl,
+ which stops when it finds the first match, starting at a given point in
+ the subject. If you want to find all possible matches, or the longest
+ possible match, consider using the alternative matching function (see
+ below) instead. If you cannot use the alternative function, but still
+ need to find all possible matches, you can kludge it up by making use
+ of the callout facility, which is described in the pcrecallout documen-
+ tation.
+
+ What you have to do is to insert a callout right at the end of the pat-
+ tern. When your callout function is called, extract and save the cur-
+ rent matched substring. Then return 1, which forces pcre_exec() to
+ backtrack and try other alternatives. Ultimately, when it runs out of
+ matches, pcre_exec() will yield PCRE_ERROR_NOMATCH.
+
+
+MATCHING A PATTERN: THE ALTERNATIVE FUNCTION
+
+ int pcre_dfa_exec(const pcre *code, const pcre_extra *extra,
+ const char *subject, int length, int startoffset,
+ int options, int *ovector, int ovecsize,
+ int *workspace, int wscount);
+
+ The function pcre_dfa_exec() is called to match a subject string
+ against a compiled pattern, using a matching algorithm that scans the
+ subject string just once, and does not backtrack. This has different
+ characteristics to the normal algorithm, and is not compatible with
+ Perl. Some of the features of PCRE patterns are not supported. Never-
+ theless, there are times when this kind of matching can be useful. For
+ a discussion of the two matching algorithms, see the pcrematching docu-
+ mentation.
+
+ The arguments for the pcre_dfa_exec() function are the same as for
+ pcre_exec(), plus two extras. The ovector argument is used in a differ-
+ ent way, and this is described below. The other common arguments are
+ used in the same way as for pcre_exec(), so their description is not
+ repeated here.
+
+ The two additional arguments provide workspace for the function. The
+ workspace vector should contain at least 20 elements. It is used for
+ keeping track of multiple paths through the pattern tree. More
+ workspace will be needed for patterns and subjects where there are a
+ lot of potential matches.
+
+ Here is an example of a simple call to pcre_dfa_exec():
+
+ int rc;
+ int ovector[10];
+ int wspace[20];
+ rc = pcre_dfa_exec(
+ re, /* result of pcre_compile() */
+ NULL, /* we didn't study the pattern */
+ "some string", /* the subject string */
+ 11, /* the length of the subject string */
+ 0, /* start at offset 0 in the subject */
+ 0, /* default options */
+ ovector, /* vector of integers for substring information */
+ 10, /* number of elements (NOT size in bytes) */
+ wspace, /* working space vector */
+ 20); /* number of elements (NOT size in bytes) */
+
+ Option bits for pcre_dfa_exec()
+
+ The unused bits of the options argument for pcre_dfa_exec() must be
+ zero. The only bits that may be set are PCRE_ANCHORED, PCRE_NEW-
+ LINE_xxx, PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NO_UTF8_CHECK,
+ PCRE_PARTIAL, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last
+ three of these are the same as for pcre_exec(), so their description is
+ not repeated here.
+
+ PCRE_PARTIAL
+
+ This has the same general effect as it does for pcre_exec(), but the
+ details are slightly different. When PCRE_PARTIAL is set for
+ pcre_dfa_exec(), the return code PCRE_ERROR_NOMATCH is converted into
+ PCRE_ERROR_PARTIAL if the end of the subject is reached, there have
+ been no complete matches, but there is still at least one matching pos-
+ sibility. The portion of the string that provided the partial match is
+ set as the first matching string.
+
+ PCRE_DFA_SHORTEST
+
+ Setting the PCRE_DFA_SHORTEST option causes the matching algorithm to
+ stop as soon as it has found one match. Because of the way the alterna-
+ tive algorithm works, this is necessarily the shortest possible match
+ at the first possible matching point in the subject string.
+
+ PCRE_DFA_RESTART
+
+ When pcre_dfa_exec() is called with the PCRE_PARTIAL option, and
+ returns a partial match, it is possible to call it again, with addi-
+ tional subject characters, and have it continue with the same match.
+ The PCRE_DFA_RESTART option requests this action; when it is set, the
+ workspace and wscount options must reference the same vector as before
+ because data about the match so far is left in them after a partial
+ match. There is more discussion of this facility in the pcrepartial
+ documentation.
+
+ Successful returns from pcre_dfa_exec()
+
+ When pcre_dfa_exec() succeeds, it may have matched more than one sub-
+ string in the subject. Note, however, that all the matches from one run
+ of the function start at the same point in the subject. The shorter
+ matches are all initial substrings of the longer matches. For example,
+ if the pattern
+
+ <.*>
+
+ is matched against the string
+
+ This is <something> <something else> <something further> no more
+
+ the three matched strings are
+
+ <something>
+ <something> <something else>
+ <something> <something else> <something further>
+
+ On success, the yield of the function is a number greater than zero,
+ which is the number of matched substrings. The substrings themselves
+ are returned in ovector. Each string uses two elements; the first is
+ the offset to the start, and the second is the offset to the end. In
+ fact, all the strings have the same start offset. (Space could have
+ been saved by giving this only once, but it was decided to retain some
+ compatibility with the way pcre_exec() returns data, even though the
+ meaning of the strings is different.)
+
+ The strings are returned in reverse order of length; that is, the long-
+ est matching string is given first. If there were too many matches to
+ fit into ovector, the yield of the function is zero, and the vector is
+ filled with the longest matches.
+
+ Error returns from pcre_dfa_exec()
+
+ The pcre_dfa_exec() function returns a negative number when it fails.
+ Many of the errors are the same as for pcre_exec(), and these are
+ described above. There are in addition the following errors that are
+ specific to pcre_dfa_exec():
+
+ PCRE_ERROR_DFA_UITEM (-16)
+
+ This return is given if pcre_dfa_exec() encounters an item in the pat-
+ tern that it does not support, for instance, the use of \C or a back
+ reference.
+
+ PCRE_ERROR_DFA_UCOND (-17)
+
+ This return is given if pcre_dfa_exec() encounters a condition item
+ that uses a back reference for the condition, or a test for recursion
+ in a specific group. These are not supported.
+
+ PCRE_ERROR_DFA_UMLIMIT (-18)
+
+ This return is given if pcre_dfa_exec() is called with an extra block
+ that contains a setting of the match_limit field. This is not supported
+ (it is meaningless).
+
+ PCRE_ERROR_DFA_WSSIZE (-19)
+
+ This return is given if pcre_dfa_exec() runs out of space in the
+ workspace vector.
+
+ PCRE_ERROR_DFA_RECURSE (-20)
+
+ When a recursive subpattern is processed, the matching function calls
+ itself recursively, using private vectors for ovector and workspace.
+ This error is given if the output vector is not large enough. This
+ should be extremely rare, as a vector of size 1000 is used.
+
+
+SEE ALSO
+
+ pcrebuild(3), pcrecallout(3), pcrecpp(3)(3), pcrematching(3), pcrepar-
+ tial(3), pcreposix(3), pcreprecompile(3), pcresample(3), pcrestack(3).
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 24 August 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCRECALLOUT(3) PCRECALLOUT(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE CALLOUTS
+
+ int (*pcre_callout)(pcre_callout_block *);
+
+ PCRE provides a feature called "callout", which is a means of temporar-
+ ily passing control to the caller of PCRE in the middle of pattern
+ matching. The caller of PCRE provides an external function by putting
+ its entry point in the global variable pcre_callout. By default, this
+ variable contains NULL, which disables all calling out.
+
+ Within a regular expression, (?C) indicates the points at which the
+ external function is to be called. Different callout points can be
+ identified by putting a number less than 256 after the letter C. The
+ default value is zero. For example, this pattern has two callout
+ points:
+
+ (?C1)abc(?C2)def
+
+ If the PCRE_AUTO_CALLOUT option bit is set when pcre_compile() is
+ called, PCRE automatically inserts callouts, all with number 255,
+ before each item in the pattern. For example, if PCRE_AUTO_CALLOUT is
+ used with the pattern
+
+ A(\d{2}|--)
+
+ it is processed as if it were
+
+ (?C255)A(?C255)((?C255)\d{2}(?C255)|(?C255)-(?C255)-(?C255))(?C255)
+
+ Notice that there is a callout before and after each parenthesis and
+ alternation bar. Automatic callouts can be used for tracking the
+ progress of pattern matching. The pcretest command has an option that
+ sets automatic callouts; when it is used, the output indicates how the
+ pattern is matched. This is useful information when you are trying to
+ optimize the performance of a particular pattern.
+
+
+MISSING CALLOUTS
+
+ You should be aware that, because of optimizations in the way PCRE
+ matches patterns, callouts sometimes do not happen. For example, if the
+ pattern is
+
+ ab(?C4)cd
+
+ PCRE knows that any matching string must contain the letter "d". If the
+ subject string is "abyz", the lack of "d" means that matching doesn't
+ ever start, and the callout is never reached. However, with "abyd",
+ though the result is still no match, the callout is obeyed.
+
+
+THE CALLOUT INTERFACE
+
+ During matching, when PCRE reaches a callout point, the external func-
+ tion defined by pcre_callout is called (if it is set). This applies to
+ both the pcre_exec() and the pcre_dfa_exec() matching functions. The
+ only argument to the callout function is a pointer to a pcre_callout
+ block. This structure contains the following fields:
+
+ int version;
+ int callout_number;
+ int *offset_vector;
+ const char *subject;
+ int subject_length;
+ int start_match;
+ int current_position;
+ int capture_top;
+ int capture_last;
+ void *callout_data;
+ int pattern_position;
+ int next_item_length;
+
+ The version field is an integer containing the version number of the
+ block format. The initial version was 0; the current version is 1. The
+ version number will change again in future if additional fields are
+ added, but the intention is never to remove any of the existing fields.
+
+ The callout_number field contains the number of the callout, as com-
+ piled into the pattern (that is, the number after ?C for manual call-
+ outs, and 255 for automatically generated callouts).
+
+ The offset_vector field is a pointer to the vector of offsets that was
+ passed by the caller to pcre_exec() or pcre_dfa_exec(). When
+ pcre_exec() is used, the contents can be inspected in order to extract
+ substrings that have been matched so far, in the same way as for
+ extracting substrings after a match has completed. For pcre_dfa_exec()
+ this field is not useful.
+
+ The subject and subject_length fields contain copies of the values that
+ were passed to pcre_exec().
+
+ The start_match field normally contains the offset within the subject
+ at which the current match attempt started. However, if the escape
+ sequence \K has been encountered, this value is changed to reflect the
+ modified starting point. If the pattern is not anchored, the callout
+ function may be called several times from the same point in the pattern
+ for different starting points in the subject.
+
+ The current_position field contains the offset within the subject of
+ the current match pointer.
+
+ When the pcre_exec() function is used, the capture_top field contains
+ one more than the number of the highest numbered captured substring so
+ far. If no substrings have been captured, the value of capture_top is
+ one. This is always the case when pcre_dfa_exec() is used, because it
+ does not support captured substrings.
+
+ The capture_last field contains the number of the most recently cap-
+ tured substring. If no substrings have been captured, its value is -1.
+ This is always the case when pcre_dfa_exec() is used.
+
+ The callout_data field contains a value that is passed to pcre_exec()
+ or pcre_dfa_exec() specifically so that it can be passed back in call-
+ outs. It is passed in the pcre_callout field of the pcre_extra data
+ structure. If no such data was passed, the value of callout_data in a
+ pcre_callout block is NULL. There is a description of the pcre_extra
+ structure in the pcreapi documentation.
+
+ The pattern_position field is present from version 1 of the pcre_call-
+ out structure. It contains the offset to the next item to be matched in
+ the pattern string.
+
+ The next_item_length field is present from version 1 of the pcre_call-
+ out structure. It contains the length of the next item to be matched in
+ the pattern string. When the callout immediately precedes an alterna-
+ tion bar, a closing parenthesis, or the end of the pattern, the length
+ is zero. When the callout precedes an opening parenthesis, the length
+ is that of the entire subpattern.
+
+ The pattern_position and next_item_length fields are intended to help
+ in distinguishing between different automatic callouts, which all have
+ the same callout number. However, they are set for all callouts.
+
+
+RETURN VALUES
+
+ The external callout function returns an integer to PCRE. If the value
+ is zero, matching proceeds as normal. If the value is greater than
+ zero, matching fails at the current point, but the testing of other
+ matching possibilities goes ahead, just as if a lookahead assertion had
+ failed. If the value is less than zero, the match is abandoned, and
+ pcre_exec() (or pcre_dfa_exec()) returns the negative value.
+
+ Negative values should normally be chosen from the set of
+ PCRE_ERROR_xxx values. In particular, PCRE_ERROR_NOMATCH forces a stan-
+ dard "no match" failure. The error number PCRE_ERROR_CALLOUT is
+ reserved for use by callout functions; it will never be used by PCRE
+ itself.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 29 May 2007
+ Copyright (c) 1997-2007 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCRECOMPAT(3) PCRECOMPAT(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+DIFFERENCES BETWEEN PCRE AND PERL
+
+ This document describes the differences in the ways that PCRE and Perl
+ handle regular expressions. The differences described here are mainly
+ with respect to Perl 5.8, though PCRE versions 7.0 and later contain
+ some features that are expected to be in the forthcoming Perl 5.10.
+
+ 1. PCRE has only a subset of Perl's UTF-8 and Unicode support. Details
+ of what it does have are given in the section on UTF-8 support in the
+ main pcre page.
+
+ 2. PCRE does not allow repeat quantifiers on lookahead assertions. Perl
+ permits them, but they do not mean what you might think. For example,
+ (?!a){3} does not assert that the next three characters are not "a". It
+ just asserts that the next character is not "a" three times.
+
+ 3. Capturing subpatterns that occur inside negative lookahead asser-
+ tions are counted, but their entries in the offsets vector are never
+ set. Perl sets its numerical variables from any such patterns that are
+ matched before the assertion fails to match something (thereby succeed-
+ ing), but only if the negative lookahead assertion contains just one
+ branch.
+
+ 4. Though binary zero characters are supported in the subject string,
+ they are not allowed in a pattern string because it is passed as a nor-
+ mal C string, terminated by zero. The escape sequence \0 can be used in
+ the pattern to represent a binary zero.
+
+ 5. The following Perl escape sequences are not supported: \l, \u, \L,
+ \U, and \N. In fact these are implemented by Perl's general string-han-
+ dling and are not part of its pattern matching engine. If any of these
+ are encountered by PCRE, an error is generated.
+
+ 6. The Perl escape sequences \p, \P, and \X are supported only if PCRE
+ is built with Unicode character property support. The properties that
+ can be tested with \p and \P are limited to the general category prop-
+ erties such as Lu and Nd, script names such as Greek or Han, and the
+ derived properties Any and L&.
+
+ 7. PCRE does support the \Q...\E escape for quoting substrings. Charac-
+ ters in between are treated as literals. This is slightly different
+ from Perl in that $ and @ are also handled as literals inside the
+ quotes. In Perl, they cause variable interpolation (but of course PCRE
+ does not have variables). Note the following examples:
+
+ Pattern PCRE matches Perl matches
+
+ \Qabc$xyz\E abc$xyz abc followed by the
+ contents of $xyz
+ \Qabc\$xyz\E abc\$xyz abc\$xyz
+ \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
+
+ The \Q...\E sequence is recognized both inside and outside character
+ classes.
+
+ 8. Fairly obviously, PCRE does not support the (?{code}) and (??{code})
+ constructions. However, there is support for recursive patterns. This
+ is not available in Perl 5.8, but will be in Perl 5.10. Also, the PCRE
+ "callout" feature allows an external function to be called during pat-
+ tern matching. See the pcrecallout documentation for details.
+
+ 9. Subpatterns that are called recursively or as "subroutines" are
+ always treated as atomic groups in PCRE. This is like Python, but
+ unlike Perl.
+
+ 10. There are some differences that are concerned with the settings of
+ captured strings when part of a pattern is repeated. For example,
+ matching "aba" against the pattern /^(a(b)?)+$/ in Perl leaves $2
+ unset, but in PCRE it is set to "b".
+
+ 11. PCRE does support Perl 5.10's backtracking verbs (*ACCEPT),
+ (*FAIL), (*F), (*COMMIT), (*PRUNE), (*SKIP), and (*THEN), but only in
+ the forms without an argument. PCRE does not support (*MARK). If
+ (*ACCEPT) is within capturing parentheses, PCRE does not set that cap-
+ ture group; this is different to Perl.
+
+ 12. PCRE provides some extensions to the Perl regular expression facil-
+ ities. Perl 5.10 will include new features that are not in earlier
+ versions, some of which (such as named parentheses) have been in PCRE
+ for some time. This list is with respect to Perl 5.10:
+
+ (a) Although lookbehind assertions must match fixed length strings,
+ each alternative branch of a lookbehind assertion can match a different
+ length of string. Perl requires them all to have the same length.
+
+ (b) If PCRE_DOLLAR_ENDONLY is set and PCRE_MULTILINE is not set, the $
+ meta-character matches only at the very end of the string.
+
+ (c) If PCRE_EXTRA is set, a backslash followed by a letter with no spe-
+ cial meaning is faulted. Otherwise, like Perl, the backslash is quietly
+ ignored. (Perl can be made to issue a warning.)
+
+ (d) If PCRE_UNGREEDY is set, the greediness of the repetition quanti-
+ fiers is inverted, that is, by default they are not greedy, but if fol-
+ lowed by a question mark they are.
+
+ (e) PCRE_ANCHORED can be used at matching time to force a pattern to be
+ tried only at the first matching position in the subject string.
+
+ (f) The PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, and PCRE_NO_AUTO_CAP-
+ TURE options for pcre_exec() have no Perl equivalents.
+
+ (g) The \R escape sequence can be restricted to match only CR, LF, or
+ CRLF by the PCRE_BSR_ANYCRLF option.
+
+ (h) The callout facility is PCRE-specific.
+
+ (i) The partial matching facility is PCRE-specific.
+
+ (j) Patterns compiled by PCRE can be saved and re-used at a later time,
+ even on different hosts that have the other endianness.
+
+ (k) The alternative matching function (pcre_dfa_exec()) matches in a
+ different way and is not Perl-compatible.
+
+ (l) PCRE recognizes some special sequences such as (*CR) at the start
+ of a pattern that set overall options that cannot be changed within the
+ pattern.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 11 September 2007
+ Copyright (c) 1997-2007 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREPATTERN(3) PCREPATTERN(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE REGULAR EXPRESSION DETAILS
+
+ The syntax and semantics of the regular expressions that are supported
+ by PCRE are described in detail below. There is a quick-reference syn-
+ tax summary in the pcresyntax page. PCRE tries to match Perl syntax and
+ semantics as closely as it can. PCRE also supports some alternative
+ regular expression syntax (which does not conflict with the Perl syn-
+ tax) in order to provide some compatibility with regular expressions in
+ Python, .NET, and Oniguruma.
+
+ Perl's regular expressions are described in its own documentation, and
+ regular expressions in general are covered in a number of books, some
+ of which have copious examples. Jeffrey Friedl's "Mastering Regular
+ Expressions", published by O'Reilly, covers regular expressions in
+ great detail. This description of PCRE's regular expressions is
+ intended as reference material.
+
+ The original operation of PCRE was on strings of one-byte characters.
+ However, there is now also support for UTF-8 character strings. To use
+ this, you must build PCRE to include UTF-8 support, and then call
+ pcre_compile() with the PCRE_UTF8 option. How this affects pattern
+ matching is mentioned in several places below. There is also a summary
+ of UTF-8 features in the section on UTF-8 support in the main pcre
+ page.
+
+ The remainder of this document discusses the patterns that are sup-
+ ported by PCRE when its main matching function, pcre_exec(), is used.
+ From release 6.0, PCRE offers a second matching function,
+ pcre_dfa_exec(), which matches using a different algorithm that is not
+ Perl-compatible. Some of the features discussed below are not available
+ when pcre_dfa_exec() is used. The advantages and disadvantages of the
+ alternative function, and how it differs from the normal function, are
+ discussed in the pcrematching page.
+
+
+NEWLINE CONVENTIONS
+
+ PCRE supports five different conventions for indicating line breaks in
+ strings: a single CR (carriage return) character, a single LF (line-
+ feed) character, the two-character sequence CRLF, any of the three pre-
+ ceding, or any Unicode newline sequence. The pcreapi page has further
+ discussion about newlines, and shows how to set the newline convention
+ in the options arguments for the compiling and matching functions.
+
+ It is also possible to specify a newline convention by starting a pat-
+ tern string with one of the following five sequences:
+
+ (*CR) carriage return
+ (*LF) linefeed
+ (*CRLF) carriage return, followed by linefeed
+ (*ANYCRLF) any of the three above
+ (*ANY) all Unicode newline sequences
+
+ These override the default and the options given to pcre_compile(). For
+ example, on a Unix system where LF is the default newline sequence, the
+ pattern
+
+ (*CR)a.b
+
+ changes the convention to CR. That pattern matches "a\nb" because LF is
+ no longer a newline. Note that these special settings, which are not
+ Perl-compatible, are recognized only at the very start of a pattern,
+ and that they must be in upper case. If more than one of them is
+ present, the last one is used.
+
+ The newline convention does not affect what the \R escape sequence
+ matches. By default, this is any Unicode newline sequence, for Perl
+ compatibility. However, this can be changed; see the description of \R
+ in the section entitled "Newline sequences" below. A change of \R set-
+ ting can be combined with a change of newline convention.
+
+
+CHARACTERS AND METACHARACTERS
+
+ A regular expression is a pattern that is matched against a subject
+ string from left to right. Most characters stand for themselves in a
+ pattern, and match the corresponding characters in the subject. As a
+ trivial example, the pattern
+
+ The quick brown fox
+
+ matches a portion of a subject string that is identical to itself. When
+ caseless matching is specified (the PCRE_CASELESS option), letters are
+ matched independently of case. In UTF-8 mode, PCRE always understands
+ the concept of case for characters whose values are less than 128, so
+ caseless matching is always possible. For characters with higher val-
+ ues, the concept of case is supported if PCRE is compiled with Unicode
+ property support, but not otherwise. If you want to use caseless
+ matching for characters 128 and above, you must ensure that PCRE is
+ compiled with Unicode property support as well as with UTF-8 support.
+
+ The power of regular expressions comes from the ability to include
+ alternatives and repetitions in the pattern. These are encoded in the
+ pattern by the use of metacharacters, which do not stand for themselves
+ but instead are interpreted in some special way.
+
+ There are two different sets of metacharacters: those that are recog-
+ nized anywhere in the pattern except within square brackets, and those
+ that are recognized within square brackets. Outside square brackets,
+ the metacharacters are as follows:
+
+ \ general escape character with several uses
+ ^ assert start of string (or line, in multiline mode)
+ $ assert end of string (or line, in multiline mode)
+ . match any character except newline (by default)
+ [ start character class definition
+ | start of alternative branch
+ ( start subpattern
+ ) end subpattern
+ ? extends the meaning of (
+ also 0 or 1 quantifier
+ also quantifier minimizer
+ * 0 or more quantifier
+ + 1 or more quantifier
+ also "possessive quantifier"
+ { start min/max quantifier
+
+ Part of a pattern that is in square brackets is called a "character
+ class". In a character class the only metacharacters are:
+
+ \ general escape character
+ ^ negate the class, but only if the first character
+ - indicates character range
+ [ POSIX character class (only if followed by POSIX
+ syntax)
+ ] terminates the character class
+
+ The following sections describe the use of each of the metacharacters.
+
+
+BACKSLASH
+
+ The backslash character has several uses. Firstly, if it is followed by
+ a non-alphanumeric character, it takes away any special meaning that
+ character may have. This use of backslash as an escape character
+ applies both inside and outside character classes.
+
+ For example, if you want to match a * character, you write \* in the
+ pattern. This escaping action applies whether or not the following
+ character would otherwise be interpreted as a metacharacter, so it is
+ always safe to precede a non-alphanumeric with backslash to specify
+ that it stands for itself. In particular, if you want to match a back-
+ slash, you write \\.
+
+ If a pattern is compiled with the PCRE_EXTENDED option, whitespace in
+ the pattern (other than in a character class) and characters between a
+ # outside a character class and the next newline are ignored. An escap-
+ ing backslash can be used to include a whitespace or # character as
+ part of the pattern.
+
+ If you want to remove the special meaning from a sequence of charac-
+ ters, you can do so by putting them between \Q and \E. This is differ-
+ ent from Perl in that $ and @ are handled as literals in \Q...\E
+ sequences in PCRE, whereas in Perl, $ and @ cause variable interpola-
+ tion. Note the following examples:
+
+ Pattern PCRE matches Perl matches
+
+ \Qabc$xyz\E abc$xyz abc followed by the
+ contents of $xyz
+ \Qabc\$xyz\E abc\$xyz abc\$xyz
+ \Qabc\E\$\Qxyz\E abc$xyz abc$xyz
+
+ The \Q...\E sequence is recognized both inside and outside character
+ classes.
+
+ Non-printing characters
+
+ A second use of backslash provides a way of encoding non-printing char-
+ acters in patterns in a visible manner. There is no restriction on the
+ appearance of non-printing characters, apart from the binary zero that
+ terminates a pattern, but when a pattern is being prepared by text
+ editing, it is usually easier to use one of the following escape
+ sequences than the binary character it represents:
+
+ \a alarm, that is, the BEL character (hex 07)
+ \cx "control-x", where x is any character
+ \e escape (hex 1B)
+ \f formfeed (hex 0C)
+ \n linefeed (hex 0A)
+ \r carriage return (hex 0D)
+ \t tab (hex 09)
+ \ddd character with octal code ddd, or backreference
+ \xhh character with hex code hh
+ \x{hhh..} character with hex code hhh..
+
+ The precise effect of \cx is as follows: if x is a lower case letter,
+ it is converted to upper case. Then bit 6 of the character (hex 40) is
+ inverted. Thus \cz becomes hex 1A, but \c{ becomes hex 3B, while \c;
+ becomes hex 7B.
+
+ After \x, from zero to two hexadecimal digits are read (letters can be
+ in upper or lower case). Any number of hexadecimal digits may appear
+ between \x{ and }, but the value of the character code must be less
+ than 256 in non-UTF-8 mode, and less than 2**31 in UTF-8 mode. That is,
+ the maximum value in hexadecimal is 7FFFFFFF. Note that this is bigger
+ than the largest Unicode code point, which is 10FFFF.
+
+ If characters other than hexadecimal digits appear between \x{ and },
+ or if there is no terminating }, this form of escape is not recognized.
+ Instead, the initial \x will be interpreted as a basic hexadecimal
+ escape, with no following digits, giving a character whose value is
+ zero.
+
+ Characters whose value is less than 256 can be defined by either of the
+ two syntaxes for \x. There is no difference in the way they are han-
+ dled. For example, \xdc is exactly the same as \x{dc}.
+
+ After \0 up to two further octal digits are read. If there are fewer
+ than two digits, just those that are present are used. Thus the
+ sequence \0\x\07 specifies two binary zeros followed by a BEL character
+ (code value 7). Make sure you supply two digits after the initial zero
+ if the pattern character that follows is itself an octal digit.
+
+ The handling of a backslash followed by a digit other than 0 is compli-
+ cated. Outside a character class, PCRE reads it and any following dig-
+ its as a decimal number. If the number is less than 10, or if there
+ have been at least that many previous capturing left parentheses in the
+ expression, the entire sequence is taken as a back reference. A
+ description of how this works is given later, following the discussion
+ of parenthesized subpatterns.
+
+ Inside a character class, or if the decimal number is greater than 9
+ and there have not been that many capturing subpatterns, PCRE re-reads
+ up to three octal digits following the backslash, and uses them to gen-
+ erate a data character. Any subsequent digits stand for themselves. In
+ non-UTF-8 mode, the value of a character specified in octal must be
+ less than \400. In UTF-8 mode, values up to \777 are permitted. For
+ example:
+
+ \040 is another way of writing a space
+ \40 is the same, provided there are fewer than 40
+ previous capturing subpatterns
+ \7 is always a back reference
+ \11 might be a back reference, or another way of
+ writing a tab
+ \011 is always a tab
+ \0113 is a tab followed by the character "3"
+ \113 might be a back reference, otherwise the
+ character with octal code 113
+ \377 might be a back reference, otherwise
+ the byte consisting entirely of 1 bits
+ \81 is either a back reference, or a binary zero
+ followed by the two characters "8" and "1"
+
+ Note that octal values of 100 or greater must not be introduced by a
+ leading zero, because no more than three octal digits are ever read.
+
+ All the sequences that define a single character value can be used both
+ inside and outside character classes. In addition, inside a character
+ class, the sequence \b is interpreted as the backspace character (hex
+ 08), and the sequences \R and \X are interpreted as the characters "R"
+ and "X", respectively. Outside a character class, these sequences have
+ different meanings (see below).
+
+ Absolute and relative back references
+
+ The sequence \g followed by an unsigned or a negative number, option-
+ ally enclosed in braces, is an absolute or relative back reference. A
+ named back reference can be coded as \g{name}. Back references are dis-
+ cussed later, following the discussion of parenthesized subpatterns.
+
+ Absolute and relative subroutine calls
+
+ For compatibility with Oniguruma, the non-Perl syntax \g followed by a
+ name or a number enclosed either in angle brackets or single quotes, is
+ an alternative syntax for referencing a subpattern as a "subroutine".
+ Details are discussed later. Note that \g{...} (Perl syntax) and
+ \g<...> (Oniguruma syntax) are not synonymous. The former is a back
+ reference; the latter is a subroutine call.
+
+ Generic character types
+
+ Another use of backslash is for specifying generic character types. The
+ following are always recognized:
+
+ \d any decimal digit
+ \D any character that is not a decimal digit
+ \h any horizontal whitespace character
+ \H any character that is not a horizontal whitespace character
+ \s any whitespace character
+ \S any character that is not a whitespace character
+ \v any vertical whitespace character
+ \V any character that is not a vertical whitespace character
+ \w any "word" character
+ \W any "non-word" character
+
+ Each pair of escape sequences partitions the complete set of characters
+ into two disjoint sets. Any given character matches one, and only one,
+ of each pair.
+
+ These character type sequences can appear both inside and outside char-
+ acter classes. They each match one character of the appropriate type.
+ If the current matching point is at the end of the subject string, all
+ of them fail, since there is no character to match.
+
+ For compatibility with Perl, \s does not match the VT character (code
+ 11). This makes it different from the the POSIX "space" class. The \s
+ characters are HT (9), LF (10), FF (12), CR (13), and space (32). If
+ "use locale;" is included in a Perl script, \s may match the VT charac-
+ ter. In PCRE, it never does.
+
+ In UTF-8 mode, characters with values greater than 128 never match \d,
+ \s, or \w, and always match \D, \S, and \W. This is true even when Uni-
+ code character property support is available. These sequences retain
+ their original meanings from before UTF-8 support was available, mainly
+ for efficiency reasons.
+
+ The sequences \h, \H, \v, and \V are Perl 5.10 features. In contrast to
+ the other sequences, these do match certain high-valued codepoints in
+ UTF-8 mode. The horizontal space characters are:
+
+ U+0009 Horizontal tab
+ U+0020 Space
+ U+00A0 Non-break space
+ U+1680 Ogham space mark
+ U+180E Mongolian vowel separator
+ U+2000 En quad
+ U+2001 Em quad
+ U+2002 En space
+ U+2003 Em space
+ U+2004 Three-per-em space
+ U+2005 Four-per-em space
+ U+2006 Six-per-em space
+ U+2007 Figure space
+ U+2008 Punctuation space
+ U+2009 Thin space
+ U+200A Hair space
+ U+202F Narrow no-break space
+ U+205F Medium mathematical space
+ U+3000 Ideographic space
+
+ The vertical space characters are:
+
+ U+000A Linefeed
+ U+000B Vertical tab
+ U+000C Formfeed
+ U+000D Carriage return
+ U+0085 Next line
+ U+2028 Line separator
+ U+2029 Paragraph separator
+
+ A "word" character is an underscore or any character less than 256 that
+ is a letter or digit. The definition of letters and digits is con-
+ trolled by PCRE's low-valued character tables, and may vary if locale-
+ specific matching is taking place (see "Locale support" in the pcreapi
+ page). For example, in a French locale such as "fr_FR" in Unix-like
+ systems, or "french" in Windows, some character codes greater than 128
+ are used for accented letters, and these are matched by \w. The use of
+ locales with Unicode is discouraged.
+
+ Newline sequences
+
+ Outside a character class, by default, the escape sequence \R matches
+ any Unicode newline sequence. This is a Perl 5.10 feature. In non-UTF-8
+ mode \R is equivalent to the following:
+
+ (?>\r\n|\n|\x0b|\f|\r|\x85)
+
+ This is an example of an "atomic group", details of which are given
+ below. This particular group matches either the two-character sequence
+ CR followed by LF, or one of the single characters LF (linefeed,
+ U+000A), VT (vertical tab, U+000B), FF (formfeed, U+000C), CR (carriage
+ return, U+000D), or NEL (next line, U+0085). The two-character sequence
+ is treated as a single unit that cannot be split.
+
+ In UTF-8 mode, two additional characters whose codepoints are greater
+ than 255 are added: LS (line separator, U+2028) and PS (paragraph sepa-
+ rator, U+2029). Unicode character property support is not needed for
+ these characters to be recognized.
+
+ It is possible to restrict \R to match only CR, LF, or CRLF (instead of
+ the complete set of Unicode line endings) by setting the option
+ PCRE_BSR_ANYCRLF either at compile time or when the pattern is matched.
+ (BSR is an abbrevation for "backslash R".) This can be made the default
+ when PCRE is built; if this is the case, the other behaviour can be
+ requested via the PCRE_BSR_UNICODE option. It is also possible to
+ specify these settings by starting a pattern string with one of the
+ following sequences:
+
+ (*BSR_ANYCRLF) CR, LF, or CRLF only
+ (*BSR_UNICODE) any Unicode newline sequence
+
+ These override the default and the options given to pcre_compile(), but
+ they can be overridden by options given to pcre_exec(). Note that these
+ special settings, which are not Perl-compatible, are recognized only at
+ the very start of a pattern, and that they must be in upper case. If
+ more than one of them is present, the last one is used. They can be
+ combined with a change of newline convention, for example, a pattern
+ can start with:
+
+ (*ANY)(*BSR_ANYCRLF)
+
+ Inside a character class, \R matches the letter "R".
+
+ Unicode character properties
+
+ When PCRE is built with Unicode character property support, three addi-
+ tional escape sequences that match characters with specific properties
+ are available. When not in UTF-8 mode, these sequences are of course
+ limited to testing characters whose codepoints are less than 256, but
+ they do work in this mode. The extra escape sequences are:
+
+ \p{xx} a character with the xx property
+ \P{xx} a character without the xx property
+ \X an extended Unicode sequence
+
+ The property names represented by xx above are limited to the Unicode
+ script names, the general category properties, and "Any", which matches
+ any character (including newline). Other properties such as "InMusical-
+ Symbols" are not currently supported by PCRE. Note that \P{Any} does
+ not match any characters, so always causes a match failure.
+
+ Sets of Unicode characters are defined as belonging to certain scripts.
+ A character from one of these sets can be matched using a script name.
+ For example:
+
+ \p{Greek}
+ \P{Han}
+
+ Those that are not part of an identified script are lumped together as
+ "Common". The current list of scripts is:
+
+ Arabic, Armenian, Balinese, Bengali, Bopomofo, Braille, Buginese,
+ Buhid, Canadian_Aboriginal, Cherokee, Common, Coptic, Cuneiform,
+ Cypriot, Cyrillic, Deseret, Devanagari, Ethiopic, Georgian, Glagolitic,
+ Gothic, Greek, Gujarati, Gurmukhi, Han, Hangul, Hanunoo, Hebrew, Hira-
+ gana, Inherited, Kannada, Katakana, Kharoshthi, Khmer, Lao, Latin,
+ Limbu, Linear_B, Malayalam, Mongolian, Myanmar, New_Tai_Lue, Nko,
+ Ogham, Old_Italic, Old_Persian, Oriya, Osmanya, Phags_Pa, Phoenician,
+ Runic, Shavian, Sinhala, Syloti_Nagri, Syriac, Tagalog, Tagbanwa,
+ Tai_Le, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, Ugaritic, Yi.
+
+ Each character has exactly one general category property, specified by
+ a two-letter abbreviation. For compatibility with Perl, negation can be
+ specified by including a circumflex between the opening brace and the
+ property name. For example, \p{^Lu} is the same as \P{Lu}.
+
+ If only one letter is specified with \p or \P, it includes all the gen-
+ eral category properties that start with that letter. In this case, in
+ the absence of negation, the curly brackets in the escape sequence are
+ optional; these two examples have the same effect:
+
+ \p{L}
+ \pL
+
+ The following general category property codes are supported:
+
+ C Other
+ Cc Control
+ Cf Format
+ Cn Unassigned
+ Co Private use
+ Cs Surrogate
+
+ L Letter
+ Ll Lower case letter
+ Lm Modifier letter
+ Lo Other letter
+ Lt Title case letter
+ Lu Upper case letter
+
+ M Mark
+ Mc Spacing mark
+ Me Enclosing mark
+ Mn Non-spacing mark
+
+ N Number
+ Nd Decimal number
+ Nl Letter number
+ No Other number
+
+ P Punctuation
+ Pc Connector punctuation
+ Pd Dash punctuation
+ Pe Close punctuation
+ Pf Final punctuation
+ Pi Initial punctuation
+ Po Other punctuation
+ Ps Open punctuation
+
+ S Symbol
+ Sc Currency symbol
+ Sk Modifier symbol
+ Sm Mathematical symbol
+ So Other symbol
+
+ Z Separator
+ Zl Line separator
+ Zp Paragraph separator
+ Zs Space separator
+
+ The special property L& is also supported: it matches a character that
+ has the Lu, Ll, or Lt property, in other words, a letter that is not
+ classified as a modifier or "other".
+
+ The Cs (Surrogate) property applies only to characters in the range
+ U+D800 to U+DFFF. Such characters are not valid in UTF-8 strings (see
+ RFC 3629) and so cannot be tested by PCRE, unless UTF-8 validity check-
+ ing has been turned off (see the discussion of PCRE_NO_UTF8_CHECK in
+ the pcreapi page).
+
+ The long synonyms for these properties that Perl supports (such as
+ \p{Letter}) are not supported by PCRE, nor is it permitted to prefix
+ any of these properties with "Is".
+
+ No character that is in the Unicode table has the Cn (unassigned) prop-
+ erty. Instead, this property is assumed for any code point that is not
+ in the Unicode table.
+
+ Specifying caseless matching does not affect these escape sequences.
+ For example, \p{Lu} always matches only upper case letters.
+
+ The \X escape matches any number of Unicode characters that form an
+ extended Unicode sequence. \X is equivalent to
+
+ (?>\PM\pM*)
+
+ That is, it matches a character without the "mark" property, followed
+ by zero or more characters with the "mark" property, and treats the
+ sequence as an atomic group (see below). Characters with the "mark"
+ property are typically accents that affect the preceding character.
+ None of them have codepoints less than 256, so in non-UTF-8 mode \X
+ matches any one character.
+
+ Matching characters by Unicode property is not fast, because PCRE has
+ to search a structure that contains data for over fifteen thousand
+ characters. That is why the traditional escape sequences such as \d and
+ \w do not use Unicode properties in PCRE.
+
+ Resetting the match start
+
+ The escape sequence \K, which is a Perl 5.10 feature, causes any previ-
+ ously matched characters not to be included in the final matched
+ sequence. For example, the pattern:
+
+ foo\Kbar
+
+ matches "foobar", but reports that it has matched "bar". This feature
+ is similar to a lookbehind assertion (described below). However, in
+ this case, the part of the subject before the real match does not have
+ to be of fixed length, as lookbehind assertions do. The use of \K does
+ not interfere with the setting of captured substrings. For example,
+ when the pattern
+
+ (foo)\Kbar
+
+ matches "foobar", the first substring is still set to "foo".
+
+ Simple assertions
+
+ The final use of backslash is for certain simple assertions. An asser-
+ tion specifies a condition that has to be met at a particular point in
+ a match, without consuming any characters from the subject string. The
+ use of subpatterns for more complicated assertions is described below.
+ The backslashed assertions are:
+
+ \b matches at a word boundary
+ \B matches when not at a word boundary
+ \A matches at the start of the subject
+ \Z matches at the end of the subject
+ also matches before a newline at the end of the subject
+ \z matches only at the end of the subject
+ \G matches at the first matching position in the subject
+
+ These assertions may not appear in character classes (but note that \b
+ has a different meaning, namely the backspace character, inside a char-
+ acter class).
+
+ A word boundary is a position in the subject string where the current
+ character and the previous character do not both match \w or \W (i.e.
+ one matches \w and the other matches \W), or the start or end of the
+ string if the first or last character matches \w, respectively.
+
+ The \A, \Z, and \z assertions differ from the traditional circumflex
+ and dollar (described in the next section) in that they only ever match
+ at the very start and end of the subject string, whatever options are
+ set. Thus, they are independent of multiline mode. These three asser-
+ tions are not affected by the PCRE_NOTBOL or PCRE_NOTEOL options, which
+ affect only the behaviour of the circumflex and dollar metacharacters.
+ However, if the startoffset argument of pcre_exec() is non-zero, indi-
+ cating that matching is to start at a point other than the beginning of
+ the subject, \A can never match. The difference between \Z and \z is
+ that \Z matches before a newline at the end of the string as well as at
+ the very end, whereas \z matches only at the end.
+
+ The \G assertion is true only when the current matching position is at
+ the start point of the match, as specified by the startoffset argument
+ of pcre_exec(). It differs from \A when the value of startoffset is
+ non-zero. By calling pcre_exec() multiple times with appropriate argu-
+ ments, you can mimic Perl's /g option, and it is in this kind of imple-
+ mentation where \G can be useful.
+
+ Note, however, that PCRE's interpretation of \G, as the start of the
+ current match, is subtly different from Perl's, which defines it as the
+ end of the previous match. In Perl, these can be different when the
+ previously matched string was empty. Because PCRE does just one match
+ at a time, it cannot reproduce this behaviour.
+
+ If all the alternatives of a pattern begin with \G, the expression is
+ anchored to the starting match position, and the "anchored" flag is set
+ in the compiled regular expression.
+
+
+CIRCUMFLEX AND DOLLAR
+
+ Outside a character class, in the default matching mode, the circumflex
+ character is an assertion that is true only if the current matching
+ point is at the start of the subject string. If the startoffset argu-
+ ment of pcre_exec() is non-zero, circumflex can never match if the
+ PCRE_MULTILINE option is unset. Inside a character class, circumflex
+ has an entirely different meaning (see below).
+
+ Circumflex need not be the first character of the pattern if a number
+ of alternatives are involved, but it should be the first thing in each
+ alternative in which it appears if the pattern is ever to match that
+ branch. If all possible alternatives start with a circumflex, that is,
+ if the pattern is constrained to match only at the start of the sub-
+ ject, it is said to be an "anchored" pattern. (There are also other
+ constructs that can cause a pattern to be anchored.)
+
+ A dollar character is an assertion that is true only if the current
+ matching point is at the end of the subject string, or immediately
+ before a newline at the end of the string (by default). Dollar need not
+ be the last character of the pattern if a number of alternatives are
+ involved, but it should be the last item in any branch in which it
+ appears. Dollar has no special meaning in a character class.
+
+ The meaning of dollar can be changed so that it matches only at the
+ very end of the string, by setting the PCRE_DOLLAR_ENDONLY option at
+ compile time. This does not affect the \Z assertion.
+
+ The meanings of the circumflex and dollar characters are changed if the
+ PCRE_MULTILINE option is set. When this is the case, a circumflex
+ matches immediately after internal newlines as well as at the start of
+ the subject string. It does not match after a newline that ends the
+ string. A dollar matches before any newlines in the string, as well as
+ at the very end, when PCRE_MULTILINE is set. When newline is specified
+ as the two-character sequence CRLF, isolated CR and LF characters do
+ not indicate newlines.
+
+ For example, the pattern /^abc$/ matches the subject string "def\nabc"
+ (where \n represents a newline) in multiline mode, but not otherwise.
+ Consequently, patterns that are anchored in single line mode because
+ all branches start with ^ are not anchored in multiline mode, and a
+ match for circumflex is possible when the startoffset argument of
+ pcre_exec() is non-zero. The PCRE_DOLLAR_ENDONLY option is ignored if
+ PCRE_MULTILINE is set.
+
+ Note that the sequences \A, \Z, and \z can be used to match the start
+ and end of the subject in both modes, and if all branches of a pattern
+ start with \A it is always anchored, whether or not PCRE_MULTILINE is
+ set.
+
+
+FULL STOP (PERIOD, DOT)
+
+ Outside a character class, a dot in the pattern matches any one charac-
+ ter in the subject string except (by default) a character that signi-
+ fies the end of a line. In UTF-8 mode, the matched character may be
+ more than one byte long.
+
+ When a line ending is defined as a single character, dot never matches
+ that character; when the two-character sequence CRLF is used, dot does
+ not match CR if it is immediately followed by LF, but otherwise it
+ matches all characters (including isolated CRs and LFs). When any Uni-
+ code line endings are being recognized, dot does not match CR or LF or
+ any of the other line ending characters.
+
+ The behaviour of dot with regard to newlines can be changed. If the
+ PCRE_DOTALL option is set, a dot matches any one character, without
+ exception. If the two-character sequence CRLF is present in the subject
+ string, it takes two dots to match it.
+
+ The handling of dot is entirely independent of the handling of circum-
+ flex and dollar, the only relationship being that they both involve
+ newlines. Dot has no special meaning in a character class.
+
+
+MATCHING A SINGLE BYTE
+
+ Outside a character class, the escape sequence \C matches any one byte,
+ both in and out of UTF-8 mode. Unlike a dot, it always matches any
+ line-ending characters. The feature is provided in Perl in order to
+ match individual bytes in UTF-8 mode. Because it breaks up UTF-8 char-
+ acters into individual bytes, what remains in the string may be a mal-
+ formed UTF-8 string. For this reason, the \C escape sequence is best
+ avoided.
+
+ PCRE does not allow \C to appear in lookbehind assertions (described
+ below), because in UTF-8 mode this would make it impossible to calcu-
+ late the length of the lookbehind.
+
+
+SQUARE BRACKETS AND CHARACTER CLASSES
+
+ An opening square bracket introduces a character class, terminated by a
+ closing square bracket. A closing square bracket on its own is not spe-
+ cial. If a closing square bracket is required as a member of the class,
+ it should be the first data character in the class (after an initial
+ circumflex, if present) or escaped with a backslash.
+
+ A character class matches a single character in the subject. In UTF-8
+ mode, the character may occupy more than one byte. A matched character
+ must be in the set of characters defined by the class, unless the first
+ character in the class definition is a circumflex, in which case the
+ subject character must not be in the set defined by the class. If a
+ circumflex is actually required as a member of the class, ensure it is
+ not the first character, or escape it with a backslash.
+
+ For example, the character class [aeiou] matches any lower case vowel,
+ while [^aeiou] matches any character that is not a lower case vowel.
+ Note that a circumflex is just a convenient notation for specifying the
+ characters that are in the class by enumerating those that are not. A
+ class that starts with a circumflex is not an assertion: it still con-
+ sumes a character from the subject string, and therefore it fails if
+ the current pointer is at the end of the string.
+
+ In UTF-8 mode, characters with values greater than 255 can be included
+ in a class as a literal string of bytes, or by using the \x{ escaping
+ mechanism.
+
+ When caseless matching is set, any letters in a class represent both
+ their upper case and lower case versions, so for example, a caseless
+ [aeiou] matches "A" as well as "a", and a caseless [^aeiou] does not
+ match "A", whereas a caseful version would. In UTF-8 mode, PCRE always
+ understands the concept of case for characters whose values are less
+ than 128, so caseless matching is always possible. For characters with
+ higher values, the concept of case is supported if PCRE is compiled
+ with Unicode property support, but not otherwise. If you want to use
+ caseless matching for characters 128 and above, you must ensure that
+ PCRE is compiled with Unicode property support as well as with UTF-8
+ support.
+
+ Characters that might indicate line breaks are never treated in any
+ special way when matching character classes, whatever line-ending
+ sequence is in use, and whatever setting of the PCRE_DOTALL and
+ PCRE_MULTILINE options is used. A class such as [^a] always matches one
+ of these characters.
+
+ The minus (hyphen) character can be used to specify a range of charac-
+ ters in a character class. For example, [d-m] matches any letter
+ between d and m, inclusive. If a minus character is required in a
+ class, it must be escaped with a backslash or appear in a position
+ where it cannot be interpreted as indicating a range, typically as the
+ first or last character in the class.
+
+ It is not possible to have the literal character "]" as the end charac-
+ ter of a range. A pattern such as [W-]46] is interpreted as a class of
+ two characters ("W" and "-") followed by a literal string "46]", so it
+ would match "W46]" or "-46]". However, if the "]" is escaped with a
+ backslash it is interpreted as the end of range, so [W-\]46] is inter-
+ preted as a class containing a range followed by two other characters.
+ The octal or hexadecimal representation of "]" can also be used to end
+ a range.
+
+ Ranges operate in the collating sequence of character values. They can
+ also be used for characters specified numerically, for example
+ [\000-\037]. In UTF-8 mode, ranges can include characters whose values
+ are greater than 255, for example [\x{100}-\x{2ff}].
+
+ If a range that includes letters is used when caseless matching is set,
+ it matches the letters in either case. For example, [W-c] is equivalent
+ to [][\\^_`wxyzabc], matched caselessly, and in non-UTF-8 mode, if
+ character tables for a French locale are in use, [\xc8-\xcb] matches
+ accented E characters in both cases. In UTF-8 mode, PCRE supports the
+ concept of case for characters with values greater than 128 only when
+ it is compiled with Unicode property support.
+
+ The character types \d, \D, \p, \P, \s, \S, \w, and \W may also appear
+ in a character class, and add the characters that they match to the
+ class. For example, [\dABCDEF] matches any hexadecimal digit. A circum-
+ flex can conveniently be used with the upper case character types to
+ specify a more restricted set of characters than the matching lower
+ case type. For example, the class [^\W_] matches any letter or digit,
+ but not underscore.
+
+ The only metacharacters that are recognized in character classes are
+ backslash, hyphen (only where it can be interpreted as specifying a
+ range), circumflex (only at the start), opening square bracket (only
+ when it can be interpreted as introducing a POSIX class name - see the
+ next section), and the terminating closing square bracket. However,
+ escaping other non-alphanumeric characters does no harm.
+
+
+POSIX CHARACTER CLASSES
+
+ Perl supports the POSIX notation for character classes. This uses names
+ enclosed by [: and :] within the enclosing square brackets. PCRE also
+ supports this notation. For example,
+
+ [01[:alpha:]%]
+
+ matches "0", "1", any alphabetic character, or "%". The supported class
+ names are
+
+ alnum letters and digits
+ alpha letters
+ ascii character codes 0 - 127
+ blank space or tab only
+ cntrl control characters
+ digit decimal digits (same as \d)
+ graph printing characters, excluding space
+ lower lower case letters
+ print printing characters, including space
+ punct printing characters, excluding letters and digits
+ space white space (not quite the same as \s)
+ upper upper case letters
+ word "word" characters (same as \w)
+ xdigit hexadecimal digits
+
+ The "space" characters are HT (9), LF (10), VT (11), FF (12), CR (13),
+ and space (32). Notice that this list includes the VT character (code
+ 11). This makes "space" different to \s, which does not include VT (for
+ Perl compatibility).
+
+ The name "word" is a Perl extension, and "blank" is a GNU extension
+ from Perl 5.8. Another Perl extension is negation, which is indicated
+ by a ^ character after the colon. For example,
+
+ [12[:^digit:]]
+
+ matches "1", "2", or any non-digit. PCRE (and Perl) also recognize the
+ POSIX syntax [.ch.] and [=ch=] where "ch" is a "collating element", but
+ these are not supported, and an error is given if they are encountered.
+
+ In UTF-8 mode, characters with values greater than 128 do not match any
+ of the POSIX character classes.
+
+
+VERTICAL BAR
+
+ Vertical bar characters are used to separate alternative patterns. For
+ example, the pattern
+
+ gilbert|sullivan
+
+ matches either "gilbert" or "sullivan". Any number of alternatives may
+ appear, and an empty alternative is permitted (matching the empty
+ string). The matching process tries each alternative in turn, from left
+ to right, and the first one that succeeds is used. If the alternatives
+ are within a subpattern (defined below), "succeeds" means matching the
+ rest of the main pattern as well as the alternative in the subpattern.
+
+
+INTERNAL OPTION SETTING
+
+ The settings of the PCRE_CASELESS, PCRE_MULTILINE, PCRE_DOTALL, and
+ PCRE_EXTENDED options (which are Perl-compatible) can be changed from
+ within the pattern by a sequence of Perl option letters enclosed
+ between "(?" and ")". The option letters are
+
+ i for PCRE_CASELESS
+ m for PCRE_MULTILINE
+ s for PCRE_DOTALL
+ x for PCRE_EXTENDED
+
+ For example, (?im) sets caseless, multiline matching. It is also possi-
+ ble to unset these options by preceding the letter with a hyphen, and a
+ combined setting and unsetting such as (?im-sx), which sets PCRE_CASE-
+ LESS and PCRE_MULTILINE while unsetting PCRE_DOTALL and PCRE_EXTENDED,
+ is also permitted. If a letter appears both before and after the
+ hyphen, the option is unset.
+
+ The PCRE-specific options PCRE_DUPNAMES, PCRE_UNGREEDY, and PCRE_EXTRA
+ can be changed in the same way as the Perl-compatible options by using
+ the characters J, U and X respectively.
+
+ When an option change occurs at top level (that is, not inside subpat-
+ tern parentheses), the change applies to the remainder of the pattern
+ that follows. If the change is placed right at the start of a pattern,
+ PCRE extracts it into the global options (and it will therefore show up
+ in data extracted by the pcre_fullinfo() function).
+
+ An option change within a subpattern (see below for a description of
+ subpatterns) affects only that part of the current pattern that follows
+ it, so
+
+ (a(?i)b)c
+
+ matches abc and aBc and no other strings (assuming PCRE_CASELESS is not
+ used). By this means, options can be made to have different settings
+ in different parts of the pattern. Any changes made in one alternative
+ do carry on into subsequent branches within the same subpattern. For
+ example,
+
+ (a(?i)b|c)
+
+ matches "ab", "aB", "c", and "C", even though when matching "C" the
+ first branch is abandoned before the option setting. This is because
+ the effects of option settings happen at compile time. There would be
+ some very weird behaviour otherwise.
+
+ Note: There are other PCRE-specific options that can be set by the
+ application when the compile or match functions are called. In some
+ cases the pattern can contain special leading sequences to override
+ what the application has set or what has been defaulted. Details are
+ given in the section entitled "Newline sequences" above.
+
+
+SUBPATTERNS
+
+ Subpatterns are delimited by parentheses (round brackets), which can be
+ nested. Turning part of a pattern into a subpattern does two things:
+
+ 1. It localizes a set of alternatives. For example, the pattern
+
+ cat(aract|erpillar|)
+
+ matches one of the words "cat", "cataract", or "caterpillar". Without
+ the parentheses, it would match "cataract", "erpillar" or an empty
+ string.
+
+ 2. It sets up the subpattern as a capturing subpattern. This means
+ that, when the whole pattern matches, that portion of the subject
+ string that matched the subpattern is passed back to the caller via the
+ ovector argument of pcre_exec(). Opening parentheses are counted from
+ left to right (starting from 1) to obtain numbers for the capturing
+ subpatterns.
+
+ For example, if the string "the red king" is matched against the pat-
+ tern
+
+ the ((red|white) (king|queen))
+
+ the captured substrings are "red king", "red", and "king", and are num-
+ bered 1, 2, and 3, respectively.
+
+ The fact that plain parentheses fulfil two functions is not always
+ helpful. There are often times when a grouping subpattern is required
+ without a capturing requirement. If an opening parenthesis is followed
+ by a question mark and a colon, the subpattern does not do any captur-
+ ing, and is not counted when computing the number of any subsequent
+ capturing subpatterns. For example, if the string "the white queen" is
+ matched against the pattern
+
+ the ((?:red|white) (king|queen))
+
+ the captured substrings are "white queen" and "queen", and are numbered
+ 1 and 2. The maximum number of capturing subpatterns is 65535.
+
+ As a convenient shorthand, if any option settings are required at the
+ start of a non-capturing subpattern, the option letters may appear
+ between the "?" and the ":". Thus the two patterns
+
+ (?i:saturday|sunday)
+ (?:(?i)saturday|sunday)
+
+ match exactly the same set of strings. Because alternative branches are
+ tried from left to right, and options are not reset until the end of
+ the subpattern is reached, an option setting in one branch does affect
+ subsequent branches, so the above patterns match "SUNDAY" as well as
+ "Saturday".
+
+
+DUPLICATE SUBPATTERN NUMBERS
+
+ Perl 5.10 introduced a feature whereby each alternative in a subpattern
+ uses the same numbers for its capturing parentheses. Such a subpattern
+ starts with (?| and is itself a non-capturing subpattern. For example,
+ consider this pattern:
+
+ (?|(Sat)ur|(Sun))day
+
+ Because the two alternatives are inside a (?| group, both sets of cap-
+ turing parentheses are numbered one. Thus, when the pattern matches,
+ you can look at captured substring number one, whichever alternative
+ matched. This construct is useful when you want to capture part, but
+ not all, of one of a number of alternatives. Inside a (?| group, paren-
+ theses are numbered as usual, but the number is reset at the start of
+ each branch. The numbers of any capturing buffers that follow the sub-
+ pattern start after the highest number used in any branch. The follow-
+ ing example is taken from the Perl documentation. The numbers under-
+ neath show in which buffer the captured content will be stored.
+
+ # before ---------------branch-reset----------- after
+ / ( a ) (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x
+ # 1 2 2 3 2 3 4
+
+ A backreference or a recursive call to a numbered subpattern always
+ refers to the first one in the pattern with the given number.
+
+ An alternative approach to using this "branch reset" feature is to use
+ duplicate named subpatterns, as described in the next section.
+
+
+NAMED SUBPATTERNS
+
+ Identifying capturing parentheses by number is simple, but it can be
+ very hard to keep track of the numbers in complicated regular expres-
+ sions. Furthermore, if an expression is modified, the numbers may
+ change. To help with this difficulty, PCRE supports the naming of sub-
+ patterns. This feature was not added to Perl until release 5.10. Python
+ had the feature earlier, and PCRE introduced it at release 4.0, using
+ the Python syntax. PCRE now supports both the Perl and the Python syn-
+ tax.
+
+ In PCRE, a subpattern can be named in one of three ways: (?<name>...)
+ or (?'name'...) as in Perl, or (?P<name>...) as in Python. References
+ to capturing parentheses from other parts of the pattern, such as back-
+ references, recursion, and conditions, can be made by name as well as
+ by number.
+
+ Names consist of up to 32 alphanumeric characters and underscores.
+ Named capturing parentheses are still allocated numbers as well as
+ names, exactly as if the names were not present. The PCRE API provides
+ function calls for extracting the name-to-number translation table from
+ a compiled pattern. There is also a convenience function for extracting
+ a captured substring by name.
+
+ By default, a name must be unique within a pattern, but it is possible
+ to relax this constraint by setting the PCRE_DUPNAMES option at compile
+ time. This can be useful for patterns where only one instance of the
+ named parentheses can match. Suppose you want to match the name of a
+ weekday, either as a 3-letter abbreviation or as the full name, and in
+ both cases you want to extract the abbreviation. This pattern (ignoring
+ the line breaks) does the job:
+
+ (?<DN>Mon|Fri|Sun)(?:day)?|
+ (?<DN>Tue)(?:sday)?|
+ (?<DN>Wed)(?:nesday)?|
+ (?<DN>Thu)(?:rsday)?|
+ (?<DN>Sat)(?:urday)?
+
+ There are five capturing substrings, but only one is ever set after a
+ match. (An alternative way of solving this problem is to use a "branch
+ reset" subpattern, as described in the previous section.)
+
+ The convenience function for extracting the data by name returns the
+ substring for the first (and in this example, the only) subpattern of
+ that name that matched. This saves searching to find which numbered
+ subpattern it was. If you make a reference to a non-unique named sub-
+ pattern from elsewhere in the pattern, the one that corresponds to the
+ lowest number is used. For further details of the interfaces for han-
+ dling named subpatterns, see the pcreapi documentation.
+
+
+REPETITION
+
+ Repetition is specified by quantifiers, which can follow any of the
+ following items:
+
+ a literal data character
+ the dot metacharacter
+ the \C escape sequence
+ the \X escape sequence (in UTF-8 mode with Unicode properties)
+ the \R escape sequence
+ an escape such as \d that matches a single character
+ a character class
+ a back reference (see next section)
+ a parenthesized subpattern (unless it is an assertion)
+
+ The general repetition quantifier specifies a minimum and maximum num-
+ ber of permitted matches, by giving the two numbers in curly brackets
+ (braces), separated by a comma. The numbers must be less than 65536,
+ and the first must be less than or equal to the second. For example:
+
+ z{2,4}
+
+ matches "zz", "zzz", or "zzzz". A closing brace on its own is not a
+ special character. If the second number is omitted, but the comma is
+ present, there is no upper limit; if the second number and the comma
+ are both omitted, the quantifier specifies an exact number of required
+ matches. Thus
+
+ [aeiou]{3,}
+
+ matches at least 3 successive vowels, but may match many more, while
+
+ \d{8}
+
+ matches exactly 8 digits. An opening curly bracket that appears in a
+ position where a quantifier is not allowed, or one that does not match
+ the syntax of a quantifier, is taken as a literal character. For exam-
+ ple, {,6} is not a quantifier, but a literal string of four characters.
+
+ In UTF-8 mode, quantifiers apply to UTF-8 characters rather than to
+ individual bytes. Thus, for example, \x{100}{2} matches two UTF-8 char-
+ acters, each of which is represented by a two-byte sequence. Similarly,
+ when Unicode property support is available, \X{3} matches three Unicode
+ extended sequences, each of which may be several bytes long (and they
+ may be of different lengths).
+
+ The quantifier {0} is permitted, causing the expression to behave as if
+ the previous item and the quantifier were not present. This may be use-
+ ful for subpatterns that are referenced as subroutines from elsewhere
+ in the pattern. Items other than subpatterns that have a {0} quantifier
+ are omitted from the compiled pattern.
+
+ For convenience, the three most common quantifiers have single-charac-
+ ter abbreviations:
+
+ * is equivalent to {0,}
+ + is equivalent to {1,}
+ ? is equivalent to {0,1}
+
+ It is possible to construct infinite loops by following a subpattern
+ that can match no characters with a quantifier that has no upper limit,
+ for example:
+
+ (a?)*
+
+ Earlier versions of Perl and PCRE used to give an error at compile time
+ for such patterns. However, because there are cases where this can be
+ useful, such patterns are now accepted, but if any repetition of the
+ subpattern does in fact match no characters, the loop is forcibly bro-
+ ken.
+
+ By default, the quantifiers are "greedy", that is, they match as much
+ as possible (up to the maximum number of permitted times), without
+ causing the rest of the pattern to fail. The classic example of where
+ this gives problems is in trying to match comments in C programs. These
+ appear between /* and */ and within the comment, individual * and /
+ characters may appear. An attempt to match C comments by applying the
+ pattern
+
+ /\*.*\*/
+
+ to the string
+
+ /* first comment */ not comment /* second comment */
+
+ fails, because it matches the entire string owing to the greediness of
+ the .* item.
+
+ However, if a quantifier is followed by a question mark, it ceases to
+ be greedy, and instead matches the minimum number of times possible, so
+ the pattern
+
+ /\*.*?\*/
+
+ does the right thing with the C comments. The meaning of the various
+ quantifiers is not otherwise changed, just the preferred number of
+ matches. Do not confuse this use of question mark with its use as a
+ quantifier in its own right. Because it has two uses, it can sometimes
+ appear doubled, as in
+
+ \d??\d
+
+ which matches one digit by preference, but can match two if that is the
+ only way the rest of the pattern matches.
+
+ If the PCRE_UNGREEDY option is set (an option that is not available in
+ Perl), the quantifiers are not greedy by default, but individual ones
+ can be made greedy by following them with a question mark. In other
+ words, it inverts the default behaviour.
+
+ When a parenthesized subpattern is quantified with a minimum repeat
+ count that is greater than 1 or with a limited maximum, more memory is
+ required for the compiled pattern, in proportion to the size of the
+ minimum or maximum.
+
+ If a pattern starts with .* or .{0,} and the PCRE_DOTALL option (equiv-
+ alent to Perl's /s) is set, thus allowing the dot to match newlines,
+ the pattern is implicitly anchored, because whatever follows will be
+ tried against every character position in the subject string, so there
+ is no point in retrying the overall match at any position after the
+ first. PCRE normally treats such a pattern as though it were preceded
+ by \A.
+
+ In cases where it is known that the subject string contains no new-
+ lines, it is worth setting PCRE_DOTALL in order to obtain this opti-
+ mization, or alternatively using ^ to indicate anchoring explicitly.
+
+ However, there is one situation where the optimization cannot be used.
+ When .* is inside capturing parentheses that are the subject of a
+ backreference elsewhere in the pattern, a match at the start may fail
+ where a later one succeeds. Consider, for example:
+
+ (.*)abc\1
+
+ If the subject is "xyz123abc123" the match point is the fourth charac-
+ ter. For this reason, such a pattern is not implicitly anchored.
+
+ When a capturing subpattern is repeated, the value captured is the sub-
+ string that matched the final iteration. For example, after
+
+ (tweedle[dume]{3}\s*)+
+
+ has matched "tweedledum tweedledee" the value of the captured substring
+ is "tweedledee". However, if there are nested capturing subpatterns,
+ the corresponding captured values may have been set in previous itera-
+ tions. For example, after
+
+ /(a|(b))+/
+
+ matches "aba" the value of the second captured substring is "b".
+
+
+ATOMIC GROUPING AND POSSESSIVE QUANTIFIERS
+
+ With both maximizing ("greedy") and minimizing ("ungreedy" or "lazy")
+ repetition, failure of what follows normally causes the repeated item
+ to be re-evaluated to see if a different number of repeats allows the
+ rest of the pattern to match. Sometimes it is useful to prevent this,
+ either to change the nature of the match, or to cause it fail earlier
+ than it otherwise might, when the author of the pattern knows there is
+ no point in carrying on.
+
+ Consider, for example, the pattern \d+foo when applied to the subject
+ line
+
+ 123456bar
+
+ After matching all 6 digits and then failing to match "foo", the normal
+ action of the matcher is to try again with only 5 digits matching the
+ \d+ item, and then with 4, and so on, before ultimately failing.
+ "Atomic grouping" (a term taken from Jeffrey Friedl's book) provides
+ the means for specifying that once a subpattern has matched, it is not
+ to be re-evaluated in this way.
+
+ If we use atomic grouping for the previous example, the matcher gives
+ up immediately on failing to match "foo" the first time. The notation
+ is a kind of special parenthesis, starting with (?> as in this example:
+
+ (?>\d+)foo
+
+ This kind of parenthesis "locks up" the part of the pattern it con-
+ tains once it has matched, and a failure further into the pattern is
+ prevented from backtracking into it. Backtracking past it to previous
+ items, however, works as normal.
+
+ An alternative description is that a subpattern of this type matches
+ the string of characters that an identical standalone pattern would
+ match, if anchored at the current point in the subject string.
+
+ Atomic grouping subpatterns are not capturing subpatterns. Simple cases
+ such as the above example can be thought of as a maximizing repeat that
+ must swallow everything it can. So, while both \d+ and \d+? are pre-
+ pared to adjust the number of digits they match in order to make the
+ rest of the pattern match, (?>\d+) can only match an entire sequence of
+ digits.
+
+ Atomic groups in general can of course contain arbitrarily complicated
+ subpatterns, and can be nested. However, when the subpattern for an
+ atomic group is just a single repeated item, as in the example above, a
+ simpler notation, called a "possessive quantifier" can be used. This
+ consists of an additional + character following a quantifier. Using
+ this notation, the previous example can be rewritten as
+
+ \d++foo
+
+ Note that a possessive quantifier can be used with an entire group, for
+ example:
+
+ (abc|xyz){2,3}+
+
+ Possessive quantifiers are always greedy; the setting of the
+ PCRE_UNGREEDY option is ignored. They are a convenient notation for the
+ simpler forms of atomic group. However, there is no difference in the
+ meaning of a possessive quantifier and the equivalent atomic group,
+ though there may be a performance difference; possessive quantifiers
+ should be slightly faster.
+
+ The possessive quantifier syntax is an extension to the Perl 5.8 syn-
+ tax. Jeffrey Friedl originated the idea (and the name) in the first
+ edition of his book. Mike McCloskey liked it, so implemented it when he
+ built Sun's Java package, and PCRE copied it from there. It ultimately
+ found its way into Perl at release 5.10.
+
+ PCRE has an optimization that automatically "possessifies" certain sim-
+ ple pattern constructs. For example, the sequence A+B is treated as
+ A++B because there is no point in backtracking into a sequence of A's
+ when B must follow.
+
+ When a pattern contains an unlimited repeat inside a subpattern that
+ can itself be repeated an unlimited number of times, the use of an
+ atomic group is the only way to avoid some failing matches taking a
+ very long time indeed. The pattern
+
+ (\D+|<\d+>)*[!?]
+
+ matches an unlimited number of substrings that either consist of non-
+ digits, or digits enclosed in <>, followed by either ! or ?. When it
+ matches, it runs quickly. However, if it is applied to
+
+ aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa
+
+ it takes a long time before reporting failure. This is because the
+ string can be divided between the internal \D+ repeat and the external
+ * repeat in a large number of ways, and all have to be tried. (The
+ example uses [!?] rather than a single character at the end, because
+ both PCRE and Perl have an optimization that allows for fast failure
+ when a single character is used. They remember the last single charac-
+ ter that is required for a match, and fail early if it is not present
+ in the string.) If the pattern is changed so that it uses an atomic
+ group, like this:
+
+ ((?>\D+)|<\d+>)*[!?]
+
+ sequences of non-digits cannot be broken, and failure happens quickly.
+
+
+BACK REFERENCES
+
+ Outside a character class, a backslash followed by a digit greater than
+ 0 (and possibly further digits) is a back reference to a capturing sub-
+ pattern earlier (that is, to its left) in the pattern, provided there
+ have been that many previous capturing left parentheses.
+
+ However, if the decimal number following the backslash is less than 10,
+ it is always taken as a back reference, and causes an error only if
+ there are not that many capturing left parentheses in the entire pat-
+ tern. In other words, the parentheses that are referenced need not be
+ to the left of the reference for numbers less than 10. A "forward back
+ reference" of this type can make sense when a repetition is involved
+ and the subpattern to the right has participated in an earlier itera-
+ tion.
+
+ It is not possible to have a numerical "forward back reference" to a
+ subpattern whose number is 10 or more using this syntax because a
+ sequence such as \50 is interpreted as a character defined in octal.
+ See the subsection entitled "Non-printing characters" above for further
+ details of the handling of digits following a backslash. There is no
+ such problem when named parentheses are used. A back reference to any
+ subpattern is possible using named parentheses (see below).
+
+ Another way of avoiding the ambiguity inherent in the use of digits
+ following a backslash is to use the \g escape sequence, which is a fea-
+ ture introduced in Perl 5.10. This escape must be followed by an
+ unsigned number or a negative number, optionally enclosed in braces.
+ These examples are all identical:
+
+ (ring), \1
+ (ring), \g1
+ (ring), \g{1}
+
+ An unsigned number specifies an absolute reference without the ambigu-
+ ity that is present in the older syntax. It is also useful when literal
+ digits follow the reference. A negative number is a relative reference.
+ Consider this example:
+
+ (abc(def)ghi)\g{-1}
+
+ The sequence \g{-1} is a reference to the most recently started captur-
+ ing subpattern before \g, that is, is it equivalent to \2. Similarly,
+ \g{-2} would be equivalent to \1. The use of relative references can be
+ helpful in long patterns, and also in patterns that are created by
+ joining together fragments that contain references within themselves.
+
+ A back reference matches whatever actually matched the capturing sub-
+ pattern in the current subject string, rather than anything matching
+ the subpattern itself (see "Subpatterns as subroutines" below for a way
+ of doing that). So the pattern
+
+ (sens|respons)e and \1ibility
+
+ matches "sense and sensibility" and "response and responsibility", but
+ not "sense and responsibility". If caseful matching is in force at the
+ time of the back reference, the case of letters is relevant. For exam-
+ ple,
+
+ ((?i)rah)\s+\1
+
+ matches "rah rah" and "RAH RAH", but not "RAH rah", even though the
+ original capturing subpattern is matched caselessly.
+
+ There are several different ways of writing back references to named
+ subpatterns. The .NET syntax \k{name} and the Perl syntax \k<name> or
+ \k'name' are supported, as is the Python syntax (?P=name). Perl 5.10's
+ unified back reference syntax, in which \g can be used for both numeric
+ and named references, is also supported. We could rewrite the above
+ example in any of the following ways:
+
+ (?<p1>(?i)rah)\s+\k<p1>
+ (?'p1'(?i)rah)\s+\k{p1}
+ (?P<p1>(?i)rah)\s+(?P=p1)
+ (?<p1>(?i)rah)\s+\g{p1}
+
+ A subpattern that is referenced by name may appear in the pattern
+ before or after the reference.
+
+ There may be more than one back reference to the same subpattern. If a
+ subpattern has not actually been used in a particular match, any back
+ references to it always fail. For example, the pattern
+
+ (a|(bc))\2
+
+ always fails if it starts to match "a" rather than "bc". Because there
+ may be many capturing parentheses in a pattern, all digits following
+ the backslash are taken as part of a potential back reference number.
+ If the pattern continues with a digit character, some delimiter must be
+ used to terminate the back reference. If the PCRE_EXTENDED option is
+ set, this can be whitespace. Otherwise an empty comment (see "Com-
+ ments" below) can be used.
+
+ A back reference that occurs inside the parentheses to which it refers
+ fails when the subpattern is first used, so, for example, (a\1) never
+ matches. However, such references can be useful inside repeated sub-
+ patterns. For example, the pattern
+
+ (a|b\1)+
+
+ matches any number of "a"s and also "aba", "ababbaa" etc. At each iter-
+ ation of the subpattern, the back reference matches the character
+ string corresponding to the previous iteration. In order for this to
+ work, the pattern must be such that the first iteration does not need
+ to match the back reference. This can be done using alternation, as in
+ the example above, or by a quantifier with a minimum of zero.
+
+
+ASSERTIONS
+
+ An assertion is a test on the characters following or preceding the
+ current matching point that does not actually consume any characters.
+ The simple assertions coded as \b, \B, \A, \G, \Z, \z, ^ and $ are
+ described above.
+
+ More complicated assertions are coded as subpatterns. There are two
+ kinds: those that look ahead of the current position in the subject
+ string, and those that look behind it. An assertion subpattern is
+ matched in the normal way, except that it does not cause the current
+ matching position to be changed.
+
+ Assertion subpatterns are not capturing subpatterns, and may not be
+ repeated, because it makes no sense to assert the same thing several
+ times. If any kind of assertion contains capturing subpatterns within
+ it, these are counted for the purposes of numbering the capturing sub-
+ patterns in the whole pattern. However, substring capturing is carried
+ out only for positive assertions, because it does not make sense for
+ negative assertions.
+
+ Lookahead assertions
+
+ Lookahead assertions start with (?= for positive assertions and (?! for
+ negative assertions. For example,
+
+ \w+(?=;)
+
+ matches a word followed by a semicolon, but does not include the semi-
+ colon in the match, and
+
+ foo(?!bar)
+
+ matches any occurrence of "foo" that is not followed by "bar". Note
+ that the apparently similar pattern
+
+ (?!foo)bar
+
+ does not find an occurrence of "bar" that is preceded by something
+ other than "foo"; it finds any occurrence of "bar" whatsoever, because
+ the assertion (?!foo) is always true when the next three characters are
+ "bar". A lookbehind assertion is needed to achieve the other effect.
+
+ If you want to force a matching failure at some point in a pattern, the
+ most convenient way to do it is with (?!) because an empty string
+ always matches, so an assertion that requires there not to be an empty
+ string must always fail.
+
+ Lookbehind assertions
+
+ Lookbehind assertions start with (?<= for positive assertions and (?<!
+ for negative assertions. For example,
+
+ (?<!foo)bar
+
+ does find an occurrence of "bar" that is not preceded by "foo". The
+ contents of a lookbehind assertion are restricted such that all the
+ strings it matches must have a fixed length. However, if there are sev-
+ eral top-level alternatives, they do not all have to have the same
+ fixed length. Thus
+
+ (?<=bullock|donkey)
+
+ is permitted, but
+
+ (?<!dogs?|cats?)
+
+ causes an error at compile time. Branches that match different length
+ strings are permitted only at the top level of a lookbehind assertion.
+ This is an extension compared with Perl (at least for 5.8), which
+ requires all branches to match the same length of string. An assertion
+ such as
+
+ (?<=ab(c|de))
+
+ is not permitted, because its single top-level branch can match two
+ different lengths, but it is acceptable if rewritten to use two top-
+ level branches:
+
+ (?<=abc|abde)
+
+ In some cases, the Perl 5.10 escape sequence \K (see above) can be used
+ instead of a lookbehind assertion; this is not restricted to a fixed-
+ length.
+
+ The implementation of lookbehind assertions is, for each alternative,
+ to temporarily move the current position back by the fixed length and
+ then try to match. If there are insufficient characters before the cur-
+ rent position, the assertion fails.
+
+ PCRE does not allow the \C escape (which matches a single byte in UTF-8
+ mode) to appear in lookbehind assertions, because it makes it impossi-
+ ble to calculate the length of the lookbehind. The \X and \R escapes,
+ which can match different numbers of bytes, are also not permitted.
+
+ Possessive quantifiers can be used in conjunction with lookbehind
+ assertions to specify efficient matching at the end of the subject
+ string. Consider a simple pattern such as
+
+ abcd$
+
+ when applied to a long string that does not match. Because matching
+ proceeds from left to right, PCRE will look for each "a" in the subject
+ and then see if what follows matches the rest of the pattern. If the
+ pattern is specified as
+
+ ^.*abcd$
+
+ the initial .* matches the entire string at first, but when this fails
+ (because there is no following "a"), it backtracks to match all but the
+ last character, then all but the last two characters, and so on. Once
+ again the search for "a" covers the entire string, from right to left,
+ so we are no better off. However, if the pattern is written as
+
+ ^.*+(?<=abcd)
+
+ there can be no backtracking for the .*+ item; it can match only the
+ entire string. The subsequent lookbehind assertion does a single test
+ on the last four characters. If it fails, the match fails immediately.
+ For long strings, this approach makes a significant difference to the
+ processing time.
+
+ Using multiple assertions
+
+ Several assertions (of any sort) may occur in succession. For example,
+
+ (?<=\d{3})(?<!999)foo
+
+ matches "foo" preceded by three digits that are not "999". Notice that
+ each of the assertions is applied independently at the same point in
+ the subject string. First there is a check that the previous three
+ characters are all digits, and then there is a check that the same
+ three characters are not "999". This pattern does not match "foo" pre-
+ ceded by six characters, the first of which are digits and the last
+ three of which are not "999". For example, it doesn't match "123abc-
+ foo". A pattern to do that is
+
+ (?<=\d{3}...)(?<!999)foo
+
+ This time the first assertion looks at the preceding six characters,
+ checking that the first three are digits, and then the second assertion
+ checks that the preceding three characters are not "999".
+
+ Assertions can be nested in any combination. For example,
+
+ (?<=(?<!foo)bar)baz
+
+ matches an occurrence of "baz" that is preceded by "bar" which in turn
+ is not preceded by "foo", while
+
+ (?<=\d{3}(?!999)...)foo
+
+ is another pattern that matches "foo" preceded by three digits and any
+ three characters that are not "999".
+
+
+CONDITIONAL SUBPATTERNS
+
+ It is possible to cause the matching process to obey a subpattern con-
+ ditionally or to choose between two alternative subpatterns, depending
+ on the result of an assertion, or whether a previous capturing subpat-
+ tern matched or not. The two possible forms of conditional subpattern
+ are
+
+ (?(condition)yes-pattern)
+ (?(condition)yes-pattern|no-pattern)
+
+ If the condition is satisfied, the yes-pattern is used; otherwise the
+ no-pattern (if present) is used. If there are more than two alterna-
+ tives in the subpattern, a compile-time error occurs.
+
+ There are four kinds of condition: references to subpatterns, refer-
+ ences to recursion, a pseudo-condition called DEFINE, and assertions.
+
+ Checking for a used subpattern by number
+
+ If the text between the parentheses consists of a sequence of digits,
+ the condition is true if the capturing subpattern of that number has
+ previously matched. An alternative notation is to precede the digits
+ with a plus or minus sign. In this case, the subpattern number is rela-
+ tive rather than absolute. The most recently opened parentheses can be
+ referenced by (?(-1), the next most recent by (?(-2), and so on. In
+ looping constructs it can also make sense to refer to subsequent groups
+ with constructs such as (?(+2).
+
+ Consider the following pattern, which contains non-significant white
+ space to make it more readable (assume the PCRE_EXTENDED option) and to
+ divide it into three parts for ease of discussion:
+
+ ( \( )? [^()]+ (?(1) \) )
+
+ The first part matches an optional opening parenthesis, and if that
+ character is present, sets it as the first captured substring. The sec-
+ ond part matches one or more characters that are not parentheses. The
+ third part is a conditional subpattern that tests whether the first set
+ of parentheses matched or not. If they did, that is, if subject started
+ with an opening parenthesis, the condition is true, and so the yes-pat-
+ tern is executed and a closing parenthesis is required. Otherwise,
+ since no-pattern is not present, the subpattern matches nothing. In
+ other words, this pattern matches a sequence of non-parentheses,
+ optionally enclosed in parentheses.
+
+ If you were embedding this pattern in a larger one, you could use a
+ relative reference:
+
+ ...other stuff... ( \( )? [^()]+ (?(-1) \) ) ...
+
+ This makes the fragment independent of the parentheses in the larger
+ pattern.
+
+ Checking for a used subpattern by name
+
+ Perl uses the syntax (?(<name>)...) or (?('name')...) to test for a
+ used subpattern by name. For compatibility with earlier versions of
+ PCRE, which had this facility before Perl, the syntax (?(name)...) is
+ also recognized. However, there is a possible ambiguity with this syn-
+ tax, because subpattern names may consist entirely of digits. PCRE
+ looks first for a named subpattern; if it cannot find one and the name
+ consists entirely of digits, PCRE looks for a subpattern of that num-
+ ber, which must be greater than zero. Using subpattern names that con-
+ sist entirely of digits is not recommended.
+
+ Rewriting the above example to use a named subpattern gives this:
+
+ (?<OPEN> \( )? [^()]+ (?(<OPEN>) \) )
+
+
+ Checking for pattern recursion
+
+ If the condition is the string (R), and there is no subpattern with the
+ name R, the condition is true if a recursive call to the whole pattern
+ or any subpattern has been made. If digits or a name preceded by amper-
+ sand follow the letter R, for example:
+
+ (?(R3)...) or (?(R&name)...)
+
+ the condition is true if the most recent recursion is into the subpat-
+ tern whose number or name is given. This condition does not check the
+ entire recursion stack.
+
+ At "top level", all these recursion test conditions are false. Recur-
+ sive patterns are described below.
+
+ Defining subpatterns for use by reference only
+
+ If the condition is the string (DEFINE), and there is no subpattern
+ with the name DEFINE, the condition is always false. In this case,
+ there may be only one alternative in the subpattern. It is always
+ skipped if control reaches this point in the pattern; the idea of
+ DEFINE is that it can be used to define "subroutines" that can be ref-
+ erenced from elsewhere. (The use of "subroutines" is described below.)
+ For example, a pattern to match an IPv4 address could be written like
+ this (ignore whitespace and line breaks):
+
+ (?(DEFINE) (?<byte> 2[0-4]\d | 25[0-5] | 1\d\d | [1-9]?\d) )
+ \b (?&byte) (\.(?&byte)){3} \b
+
+ The first part of the pattern is a DEFINE group inside which a another
+ group named "byte" is defined. This matches an individual component of
+ an IPv4 address (a number less than 256). When matching takes place,
+ this part of the pattern is skipped because DEFINE acts like a false
+ condition.
+
+ The rest of the pattern uses references to the named group to match the
+ four dot-separated components of an IPv4 address, insisting on a word
+ boundary at each end.
+
+ Assertion conditions
+
+ If the condition is not in any of the above formats, it must be an
+ assertion. This may be a positive or negative lookahead or lookbehind
+ assertion. Consider this pattern, again containing non-significant
+ white space, and with the two alternatives on the second line:
+
+ (?(?=[^a-z]*[a-z])
+ \d{2}-[a-z]{3}-\d{2} | \d{2}-\d{2}-\d{2} )
+
+ The condition is a positive lookahead assertion that matches an
+ optional sequence of non-letters followed by a letter. In other words,
+ it tests for the presence of at least one letter in the subject. If a
+ letter is found, the subject is matched against the first alternative;
+ otherwise it is matched against the second. This pattern matches
+ strings in one of the two forms dd-aaa-dd or dd-dd-dd, where aaa are
+ letters and dd are digits.
+
+
+COMMENTS
+
+ The sequence (?# marks the start of a comment that continues up to the
+ next closing parenthesis. Nested parentheses are not permitted. The
+ characters that make up a comment play no part in the pattern matching
+ at all.
+
+ If the PCRE_EXTENDED option is set, an unescaped # character outside a
+ character class introduces a comment that continues to immediately
+ after the next newline in the pattern.
+
+
+RECURSIVE PATTERNS
+
+ Consider the problem of matching a string in parentheses, allowing for
+ unlimited nested parentheses. Without the use of recursion, the best
+ that can be done is to use a pattern that matches up to some fixed
+ depth of nesting. It is not possible to handle an arbitrary nesting
+ depth.
+
+ For some time, Perl has provided a facility that allows regular expres-
+ sions to recurse (amongst other things). It does this by interpolating
+ Perl code in the expression at run time, and the code can refer to the
+ expression itself. A Perl pattern using code interpolation to solve the
+ parentheses problem can be created like this:
+
+ $re = qr{\( (?: (?>[^()]+) | (?p{$re}) )* \)}x;
+
+ The (?p{...}) item interpolates Perl code at run time, and in this case
+ refers recursively to the pattern in which it appears.
+
+ Obviously, PCRE cannot support the interpolation of Perl code. Instead,
+ it supports special syntax for recursion of the entire pattern, and
+ also for individual subpattern recursion. After its introduction in
+ PCRE and Python, this kind of recursion was introduced into Perl at
+ release 5.10.
+
+ A special item that consists of (? followed by a number greater than
+ zero and a closing parenthesis is a recursive call of the subpattern of
+ the given number, provided that it occurs inside that subpattern. (If
+ not, it is a "subroutine" call, which is described in the next sec-
+ tion.) The special item (?R) or (?0) is a recursive call of the entire
+ regular expression.
+
+ In PCRE (like Python, but unlike Perl), a recursive subpattern call is
+ always treated as an atomic group. That is, once it has matched some of
+ the subject string, it is never re-entered, even if it contains untried
+ alternatives and there is a subsequent matching failure.
+
+ This PCRE pattern solves the nested parentheses problem (assume the
+ PCRE_EXTENDED option is set so that white space is ignored):
+
+ \( ( (?>[^()]+) | (?R) )* \)
+
+ First it matches an opening parenthesis. Then it matches any number of
+ substrings which can either be a sequence of non-parentheses, or a
+ recursive match of the pattern itself (that is, a correctly parenthe-
+ sized substring). Finally there is a closing parenthesis.
+
+ If this were part of a larger pattern, you would not want to recurse
+ the entire pattern, so instead you could use this:
+
+ ( \( ( (?>[^()]+) | (?1) )* \) )
+
+ We have put the pattern into parentheses, and caused the recursion to
+ refer to them instead of the whole pattern.
+
+ In a larger pattern, keeping track of parenthesis numbers can be
+ tricky. This is made easier by the use of relative references. (A Perl
+ 5.10 feature.) Instead of (?1) in the pattern above you can write
+ (?-2) to refer to the second most recently opened parentheses preceding
+ the recursion. In other words, a negative number counts capturing
+ parentheses leftwards from the point at which it is encountered.
+
+ It is also possible to refer to subsequently opened parentheses, by
+ writing references such as (?+2). However, these cannot be recursive
+ because the reference is not inside the parentheses that are refer-
+ enced. They are always "subroutine" calls, as described in the next
+ section.
+
+ An alternative approach is to use named parentheses instead. The Perl
+ syntax for this is (?&name); PCRE's earlier syntax (?P>name) is also
+ supported. We could rewrite the above example as follows:
+
+ (?<pn> \( ( (?>[^()]+) | (?&pn) )* \) )
+
+ If there is more than one subpattern with the same name, the earliest
+ one is used.
+
+ This particular example pattern that we have been looking at contains
+ nested unlimited repeats, and so the use of atomic grouping for match-
+ ing strings of non-parentheses is important when applying the pattern
+ to strings that do not match. For example, when this pattern is applied
+ to
+
+ (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()
+
+ it yields "no match" quickly. However, if atomic grouping is not used,
+ the match runs for a very long time indeed because there are so many
+ different ways the + and * repeats can carve up the subject, and all
+ have to be tested before failure can be reported.
+
+ At the end of a match, the values set for any capturing subpatterns are
+ those from the outermost level of the recursion at which the subpattern
+ value is set. If you want to obtain intermediate values, a callout
+ function can be used (see below and the pcrecallout documentation). If
+ the pattern above is matched against
+
+ (ab(cd)ef)
+
+ the value for the capturing parentheses is "ef", which is the last
+ value taken on at the top level. If additional parentheses are added,
+ giving
+
+ \( ( ( (?>[^()]+) | (?R) )* ) \)
+ ^ ^
+ ^ ^
+
+ the string they capture is "ab(cd)ef", the contents of the top level
+ parentheses. If there are more than 15 capturing parentheses in a pat-
+ tern, PCRE has to obtain extra memory to store data during a recursion,
+ which it does by using pcre_malloc, freeing it via pcre_free after-
+ wards. If no memory can be obtained, the match fails with the
+ PCRE_ERROR_NOMEMORY error.
+
+ Do not confuse the (?R) item with the condition (R), which tests for
+ recursion. Consider this pattern, which matches text in angle brack-
+ ets, allowing for arbitrary nesting. Only digits are allowed in nested
+ brackets (that is, when recursing), whereas any characters are permit-
+ ted at the outer level.
+
+ < (?: (?(R) \d++ | [^<>]*+) | (?R)) * >
+
+ In this pattern, (?(R) is the start of a conditional subpattern, with
+ two different alternatives for the recursive and non-recursive cases.
+ The (?R) item is the actual recursive call.
+
+
+SUBPATTERNS AS SUBROUTINES
+
+ If the syntax for a recursive subpattern reference (either by number or
+ by name) is used outside the parentheses to which it refers, it oper-
+ ates like a subroutine in a programming language. The "called" subpat-
+ tern may be defined before or after the reference. A numbered reference
+ can be absolute or relative, as in these examples:
+
+ (...(absolute)...)...(?2)...
+ (...(relative)...)...(?-1)...
+ (...(?+1)...(relative)...
+
+ An earlier example pointed out that the pattern
+
+ (sens|respons)e and \1ibility
+
+ matches "sense and sensibility" and "response and responsibility", but
+ not "sense and responsibility". If instead the pattern
+
+ (sens|respons)e and (?1)ibility
+
+ is used, it does match "sense and responsibility" as well as the other
+ two strings. Another example is given in the discussion of DEFINE
+ above.
+
+ Like recursive subpatterns, a "subroutine" call is always treated as an
+ atomic group. That is, once it has matched some of the subject string,
+ it is never re-entered, even if it contains untried alternatives and
+ there is a subsequent matching failure.
+
+ When a subpattern is used as a subroutine, processing options such as
+ case-independence are fixed when the subpattern is defined. They cannot
+ be changed for different calls. For example, consider this pattern:
+
+ (abc)(?i:(?-1))
+
+ It matches "abcabc". It does not match "abcABC" because the change of
+ processing option does not affect the called subpattern.
+
+
+ONIGURUMA SUBROUTINE SYNTAX
+
+ For compatibility with Oniguruma, the non-Perl syntax \g followed by a
+ name or a number enclosed either in angle brackets or single quotes, is
+ an alternative syntax for referencing a subpattern as a subroutine,
+ possibly recursively. Here are two of the examples used above, rewrit-
+ ten using this syntax:
+
+ (?<pn> \( ( (?>[^()]+) | \g<pn> )* \) )
+ (sens|respons)e and \g'1'ibility
+
+ PCRE supports an extension to Oniguruma: if a number is preceded by a
+ plus or a minus sign it is taken as a relative reference. For example:
+
+ (abc)(?i:\g<-1>)
+
+ Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are not
+ synonymous. The former is a back reference; the latter is a subroutine
+ call.
+
+
+CALLOUTS
+
+ Perl has a feature whereby using the sequence (?{...}) causes arbitrary
+ Perl code to be obeyed in the middle of matching a regular expression.
+ This makes it possible, amongst other things, to extract different sub-
+ strings that match the same pair of parentheses when there is a repeti-
+ tion.
+
+ PCRE provides a similar feature, but of course it cannot obey arbitrary
+ Perl code. The feature is called "callout". The caller of PCRE provides
+ an external function by putting its entry point in the global variable
+ pcre_callout. By default, this variable contains NULL, which disables
+ all calling out.
+
+ Within a regular expression, (?C) indicates the points at which the
+ external function is to be called. If you want to identify different
+ callout points, you can put a number less than 256 after the letter C.
+ The default value is zero. For example, this pattern has two callout
+ points:
+
+ (?C1)abc(?C2)def
+
+ If the PCRE_AUTO_CALLOUT flag is passed to pcre_compile(), callouts are
+ automatically installed before each item in the pattern. They are all
+ numbered 255.
+
+ During matching, when PCRE reaches a callout point (and pcre_callout is
+ set), the external function is called. It is provided with the number
+ of the callout, the position in the pattern, and, optionally, one item
+ of data originally supplied by the caller of pcre_exec(). The callout
+ function may cause matching to proceed, to backtrack, or to fail alto-
+ gether. A complete description of the interface to the callout function
+ is given in the pcrecallout documentation.
+
+
+BACKTRACKING CONTROL
+
+ Perl 5.10 introduced a number of "Special Backtracking Control Verbs",
+ which are described in the Perl documentation as "experimental and sub-
+ ject to change or removal in a future version of Perl". It goes on to
+ say: "Their usage in production code should be noted to avoid problems
+ during upgrades." The same remarks apply to the PCRE features described
+ in this section.
+
+ Since these verbs are specifically related to backtracking, most of
+ them can be used only when the pattern is to be matched using
+ pcre_exec(), which uses a backtracking algorithm. With the exception of
+ (*FAIL), which behaves like a failing negative assertion, they cause an
+ error if encountered by pcre_dfa_exec().
+
+ The new verbs make use of what was previously invalid syntax: an open-
+ ing parenthesis followed by an asterisk. In Perl, they are generally of
+ the form (*VERB:ARG) but PCRE does not support the use of arguments, so
+ its general form is just (*VERB). Any number of these verbs may occur
+ in a pattern. There are two kinds:
+
+ Verbs that act immediately
+
+ The following verbs act as soon as they are encountered:
+
+ (*ACCEPT)
+
+ This verb causes the match to end successfully, skipping the remainder
+ of the pattern. When inside a recursion, only the innermost pattern is
+ ended immediately. PCRE differs from Perl in what happens if the
+ (*ACCEPT) is inside capturing parentheses. In Perl, the data so far is
+ captured: in PCRE no data is captured. For example:
+
+ A(A|B(*ACCEPT)|C)D
+
+ This matches "AB", "AAD", or "ACD", but when it matches "AB", no data
+ is captured.
+
+ (*FAIL) or (*F)
+
+ This verb causes the match to fail, forcing backtracking to occur. It
+ is equivalent to (?!) but easier to read. The Perl documentation notes
+ that it is probably useful only when combined with (?{}) or (??{}).
+ Those are, of course, Perl features that are not present in PCRE. The
+ nearest equivalent is the callout feature, as for example in this pat-
+ tern:
+
+ a+(?C)(*FAIL)
+
+ A match with the string "aaaa" always fails, but the callout is taken
+ before each backtrack happens (in this example, 10 times).
+
+ Verbs that act after backtracking
+
+ The following verbs do nothing when they are encountered. Matching con-
+ tinues with what follows, but if there is no subsequent match, a fail-
+ ure is forced. The verbs differ in exactly what kind of failure
+ occurs.
+
+ (*COMMIT)
+
+ This verb causes the whole match to fail outright if the rest of the
+ pattern does not match. Even if the pattern is unanchored, no further
+ attempts to find a match by advancing the start point take place. Once
+ (*COMMIT) has been passed, pcre_exec() is committed to finding a match
+ at the current starting point, or not at all. For example:
+
+ a+(*COMMIT)b
+
+ This matches "xxaab" but not "aacaab". It can be thought of as a kind
+ of dynamic anchor, or "I've started, so I must finish."
+
+ (*PRUNE)
+
+ This verb causes the match to fail at the current position if the rest
+ of the pattern does not match. If the pattern is unanchored, the normal
+ "bumpalong" advance to the next starting character then happens. Back-
+ tracking can occur as usual to the left of (*PRUNE), or when matching
+ to the right of (*PRUNE), but if there is no match to the right, back-
+ tracking cannot cross (*PRUNE). In simple cases, the use of (*PRUNE)
+ is just an alternative to an atomic group or possessive quantifier, but
+ there are some uses of (*PRUNE) that cannot be expressed in any other
+ way.
+
+ (*SKIP)
+
+ This verb is like (*PRUNE), except that if the pattern is unanchored,
+ the "bumpalong" advance is not to the next character, but to the posi-
+ tion in the subject where (*SKIP) was encountered. (*SKIP) signifies
+ that whatever text was matched leading up to it cannot be part of a
+ successful match. Consider:
+
+ a+(*SKIP)b
+
+ If the subject is "aaaac...", after the first match attempt fails
+ (starting at the first character in the string), the starting point
+ skips on to start the next attempt at "c". Note that a possessive quan-
+ tifer does not have the same effect in this example; although it would
+ suppress backtracking during the first match attempt, the second
+ attempt would start at the second character instead of skipping on to
+ "c".
+
+ (*THEN)
+
+ This verb causes a skip to the next alternation if the rest of the pat-
+ tern does not match. That is, it cancels pending backtracking, but only
+ within the current alternation. Its name comes from the observation
+ that it can be used for a pattern-based if-then-else block:
+
+ ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...
+
+ If the COND1 pattern matches, FOO is tried (and possibly further items
+ after the end of the group if FOO succeeds); on failure the matcher
+ skips to the second alternative and tries COND2, without backtracking
+ into COND1. If (*THEN) is used outside of any alternation, it acts
+ exactly like (*PRUNE).
+
+
+SEE ALSO
+
+ pcreapi(3), pcrecallout(3), pcrematching(3), pcre(3).
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 19 April 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCRESYNTAX(3) PCRESYNTAX(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE REGULAR EXPRESSION SYNTAX SUMMARY
+
+ The full syntax and semantics of the regular expressions that are sup-
+ ported by PCRE are described in the pcrepattern documentation. This
+ document contains just a quick-reference summary of the syntax.
+
+
+QUOTING
+
+ \x where x is non-alphanumeric is a literal x
+ \Q...\E treat enclosed characters as literal
+
+
+CHARACTERS
+
+ \a alarm, that is, the BEL character (hex 07)
+ \cx "control-x", where x is any character
+ \e escape (hex 1B)
+ \f formfeed (hex 0C)
+ \n newline (hex 0A)
+ \r carriage return (hex 0D)
+ \t tab (hex 09)
+ \ddd character with octal code ddd, or backreference
+ \xhh character with hex code hh
+ \x{hhh..} character with hex code hhh..
+
+
+CHARACTER TYPES
+
+ . any character except newline;
+ in dotall mode, any character whatsoever
+ \C one byte, even in UTF-8 mode (best avoided)
+ \d a decimal digit
+ \D a character that is not a decimal digit
+ \h a horizontal whitespace character
+ \H a character that is not a horizontal whitespace character
+ \p{xx} a character with the xx property
+ \P{xx} a character without the xx property
+ \R a newline sequence
+ \s a whitespace character
+ \S a character that is not a whitespace character
+ \v a vertical whitespace character
+ \V a character that is not a vertical whitespace character
+ \w a "word" character
+ \W a "non-word" character
+ \X an extended Unicode sequence
+
+ In PCRE, \d, \D, \s, \S, \w, and \W recognize only ASCII characters.
+
+
+GENERAL CATEGORY PROPERTY CODES FOR \p and \P
+
+ C Other
+ Cc Control
+ Cf Format
+ Cn Unassigned
+ Co Private use
+ Cs Surrogate
+
+ L Letter
+ Ll Lower case letter
+ Lm Modifier letter
+ Lo Other letter
+ Lt Title case letter
+ Lu Upper case letter
+ L& Ll, Lu, or Lt
+
+ M Mark
+ Mc Spacing mark
+ Me Enclosing mark
+ Mn Non-spacing mark
+
+ N Number
+ Nd Decimal number
+ Nl Letter number
+ No Other number
+
+ P Punctuation
+ Pc Connector punctuation
+ Pd Dash punctuation
+ Pe Close punctuation
+ Pf Final punctuation
+ Pi Initial punctuation
+ Po Other punctuation
+ Ps Open punctuation
+
+ S Symbol
+ Sc Currency symbol
+ Sk Modifier symbol
+ Sm Mathematical symbol
+ So Other symbol
+
+ Z Separator
+ Zl Line separator
+ Zp Paragraph separator
+ Zs Space separator
+
+
+SCRIPT NAMES FOR \p AND \P
+
+ Arabic, Armenian, Balinese, Bengali, Bopomofo, Braille, Buginese,
+ Buhid, Canadian_Aboriginal, Cherokee, Common, Coptic, Cuneiform,
+ Cypriot, Cyrillic, Deseret, Devanagari, Ethiopic, Georgian, Glagolitic,
+ Gothic, Greek, Gujarati, Gurmukhi, Han, Hangul, Hanunoo, Hebrew, Hira-
+ gana, Inherited, Kannada, Katakana, Kharoshthi, Khmer, Lao, Latin,
+ Limbu, Linear_B, Malayalam, Mongolian, Myanmar, New_Tai_Lue, Nko,
+ Ogham, Old_Italic, Old_Persian, Oriya, Osmanya, Phags_Pa, Phoenician,
+ Runic, Shavian, Sinhala, Syloti_Nagri, Syriac, Tagalog, Tagbanwa,
+ Tai_Le, Tamil, Telugu, Thaana, Thai, Tibetan, Tifinagh, Ugaritic, Yi.
+
+
+CHARACTER CLASSES
+
+ [...] positive character class
+ [^...] negative character class
+ [x-y] range (can be used for hex characters)
+ [[:xxx:]] positive POSIX named set
+ [[:^xxx:]] negative POSIX named set
+
+ alnum alphanumeric
+ alpha alphabetic
+ ascii 0-127
+ blank space or tab
+ cntrl control character
+ digit decimal digit
+ graph printing, excluding space
+ lower lower case letter
+ print printing, including space
+ punct printing, excluding alphanumeric
+ space whitespace
+ upper upper case letter
+ word same as \w
+ xdigit hexadecimal digit
+
+ In PCRE, POSIX character set names recognize only ASCII characters. You
+ can use \Q...\E inside a character class.
+
+
+QUANTIFIERS
+
+ ? 0 or 1, greedy
+ ?+ 0 or 1, possessive
+ ?? 0 or 1, lazy
+ * 0 or more, greedy
+ *+ 0 or more, possessive
+ *? 0 or more, lazy
+ + 1 or more, greedy
+ ++ 1 or more, possessive
+ +? 1 or more, lazy
+ {n} exactly n
+ {n,m} at least n, no more than m, greedy
+ {n,m}+ at least n, no more than m, possessive
+ {n,m}? at least n, no more than m, lazy
+ {n,} n or more, greedy
+ {n,}+ n or more, possessive
+ {n,}? n or more, lazy
+
+
+ANCHORS AND SIMPLE ASSERTIONS
+
+ \b word boundary
+ \B not a word boundary
+ ^ start of subject
+ also after internal newline in multiline mode
+ \A start of subject
+ $ end of subject
+ also before newline at end of subject
+ also before internal newline in multiline mode
+ \Z end of subject
+ also before newline at end of subject
+ \z end of subject
+ \G first matching position in subject
+
+
+MATCH POINT RESET
+
+ \K reset start of match
+
+
+ALTERNATION
+
+ expr|expr|expr...
+
+
+CAPTURING
+
+ (...) capturing group
+ (?<name>...) named capturing group (Perl)
+ (?'name'...) named capturing group (Perl)
+ (?P<name>...) named capturing group (Python)
+ (?:...) non-capturing group
+ (?|...) non-capturing group; reset group numbers for
+ capturing groups in each alternative
+
+
+ATOMIC GROUPS
+
+ (?>...) atomic, non-capturing group
+
+
+COMMENT
+
+ (?#....) comment (not nestable)
+
+
+OPTION SETTING
+
+ (?i) caseless
+ (?J) allow duplicate names
+ (?m) multiline
+ (?s) single line (dotall)
+ (?U) default ungreedy (lazy)
+ (?x) extended (ignore white space)
+ (?-...) unset option(s)
+
+
+LOOKAHEAD AND LOOKBEHIND ASSERTIONS
+
+ (?=...) positive look ahead
+ (?!...) negative look ahead
+ (?<=...) positive look behind
+ (?<!...) negative look behind
+
+ Each top-level branch of a look behind must be of a fixed length.
+
+
+BACKREFERENCES
+
+ \n reference by number (can be ambiguous)
+ \gn reference by number
+ \g{n} reference by number
+ \g{-n} relative reference by number
+ \k<name> reference by name (Perl)
+ \k'name' reference by name (Perl)
+ \g{name} reference by name (Perl)
+ \k{name} reference by name (.NET)
+ (?P=name) reference by name (Python)
+
+
+SUBROUTINE REFERENCES (POSSIBLY RECURSIVE)
+
+ (?R) recurse whole pattern
+ (?n) call subpattern by absolute number
+ (?+n) call subpattern by relative number
+ (?-n) call subpattern by relative number
+ (?&name) call subpattern by name (Perl)
+ (?P>name) call subpattern by name (Python)
+ \g<name> call subpattern by name (Oniguruma)
+ \g'name' call subpattern by name (Oniguruma)
+ \g<n> call subpattern by absolute number (Oniguruma)
+ \g'n' call subpattern by absolute number (Oniguruma)
+ \g<+n> call subpattern by relative number (PCRE extension)
+ \g'+n' call subpattern by relative number (PCRE extension)
+ \g<-n> call subpattern by relative number (PCRE extension)
+ \g'-n' call subpattern by relative number (PCRE extension)
+
+
+CONDITIONAL PATTERNS
+
+ (?(condition)yes-pattern)
+ (?(condition)yes-pattern|no-pattern)
+
+ (?(n)... absolute reference condition
+ (?(+n)... relative reference condition
+ (?(-n)... relative reference condition
+ (?(<name>)... named reference condition (Perl)
+ (?('name')... named reference condition (Perl)
+ (?(name)... named reference condition (PCRE)
+ (?(R)... overall recursion condition
+ (?(Rn)... specific group recursion condition
+ (?(R&name)... specific recursion condition
+ (?(DEFINE)... define subpattern for reference
+ (?(assert)... assertion condition
+
+
+BACKTRACKING CONTROL
+
+ The following act immediately they are reached:
+
+ (*ACCEPT) force successful match
+ (*FAIL) force backtrack; synonym (*F)
+
+ The following act only when a subsequent match failure causes a back-
+ track to reach them. They all force a match failure, but they differ in
+ what happens afterwards. Those that advance the start-of-match point do
+ so only if the pattern is not anchored.
+
+ (*COMMIT) overall failure, no advance of starting point
+ (*PRUNE) advance to next starting character
+ (*SKIP) advance start to current matching position
+ (*THEN) local failure, backtrack to next alternation
+
+
+NEWLINE CONVENTIONS
+
+ These are recognized only at the very start of the pattern or after a
+ (*BSR_...) option.
+
+ (*CR)
+ (*LF)
+ (*CRLF)
+ (*ANYCRLF)
+ (*ANY)
+
+
+WHAT \R MATCHES
+
+ These are recognized only at the very start of the pattern or after a
+ (*...) option that sets the newline convention.
+
+ (*BSR_ANYCRLF)
+ (*BSR_UNICODE)
+
+
+CALLOUTS
+
+ (?C) callout
+ (?Cn) callout with data n
+
+
+SEE ALSO
+
+ pcrepattern(3), pcreapi(3), pcrecallout(3), pcrematching(3), pcre(3).
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 09 April 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREPARTIAL(3) PCREPARTIAL(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PARTIAL MATCHING IN PCRE
+
+ In normal use of PCRE, if the subject string that is passed to
+ pcre_exec() or pcre_dfa_exec() matches as far as it goes, but is too
+ short to match the entire pattern, PCRE_ERROR_NOMATCH is returned.
+ There are circumstances where it might be helpful to distinguish this
+ case from other cases in which there is no match.
+
+ Consider, for example, an application where a human is required to type
+ in data for a field with specific formatting requirements. An example
+ might be a date in the form ddmmmyy, defined by this pattern:
+
+ ^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$
+
+ If the application sees the user's keystrokes one by one, and can check
+ that what has been typed so far is potentially valid, it is able to
+ raise an error as soon as a mistake is made, possibly beeping and not
+ reflecting the character that has been typed. This immediate feedback
+ is likely to be a better user interface than a check that is delayed
+ until the entire string has been entered.
+
+ PCRE supports the concept of partial matching by means of the PCRE_PAR-
+ TIAL option, which can be set when calling pcre_exec() or
+ pcre_dfa_exec(). When this flag is set for pcre_exec(), the return code
+ PCRE_ERROR_NOMATCH is converted into PCRE_ERROR_PARTIAL if at any time
+ during the matching process the last part of the subject string matched
+ part of the pattern. Unfortunately, for non-anchored matching, it is
+ not possible to obtain the position of the start of the partial match.
+ No captured data is set when PCRE_ERROR_PARTIAL is returned.
+
+ When PCRE_PARTIAL is set for pcre_dfa_exec(), the return code
+ PCRE_ERROR_NOMATCH is converted into PCRE_ERROR_PARTIAL if the end of
+ the subject is reached, there have been no complete matches, but there
+ is still at least one matching possibility. The portion of the string
+ that provided the partial match is set as the first matching string.
+
+ Using PCRE_PARTIAL disables one of PCRE's optimizations. PCRE remembers
+ the last literal byte in a pattern, and abandons matching immediately
+ if such a byte is not present in the subject string. This optimization
+ cannot be used for a subject string that might match only partially.
+
+
+RESTRICTED PATTERNS FOR PCRE_PARTIAL
+
+ Because of the way certain internal optimizations are implemented in
+ the pcre_exec() function, the PCRE_PARTIAL option cannot be used with
+ all patterns. These restrictions do not apply when pcre_dfa_exec() is
+ used. For pcre_exec(), repeated single characters such as
+
+ a{2,4}
+
+ and repeated single metasequences such as
+
+ \d+
+
+ are not permitted if the maximum number of occurrences is greater than
+ one. Optional items such as \d? (where the maximum is one) are permit-
+ ted. Quantifiers with any values are permitted after parentheses, so
+ the invalid examples above can be coded thus:
+
+ (a){2,4}
+ (\d)+
+
+ These constructions run more slowly, but for the kinds of application
+ that are envisaged for this facility, this is not felt to be a major
+ restriction.
+
+ If PCRE_PARTIAL is set for a pattern that does not conform to the
+ restrictions, pcre_exec() returns the error code PCRE_ERROR_BADPARTIAL
+ (-13). You can use the PCRE_INFO_OKPARTIAL call to pcre_fullinfo() to
+ find out if a compiled pattern can be used for partial matching.
+
+
+EXAMPLE OF PARTIAL MATCHING USING PCRETEST
+
+ If the escape sequence \P is present in a pcretest data line, the
+ PCRE_PARTIAL flag is used for the match. Here is a run of pcretest that
+ uses the date example quoted above:
+
+ re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
+ data> 25jun04\P
+ 0: 25jun04
+ 1: jun
+ data> 25dec3\P
+ Partial match
+ data> 3ju\P
+ Partial match
+ data> 3juj\P
+ No match
+ data> j\P
+ No match
+
+ The first data string is matched completely, so pcretest shows the
+ matched substrings. The remaining four strings do not match the com-
+ plete pattern, but the first two are partial matches. The same test,
+ using pcre_dfa_exec() matching (by means of the \D escape sequence),
+ produces the following output:
+
+ re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
+ data> 25jun04\P\D
+ 0: 25jun04
+ data> 23dec3\P\D
+ Partial match: 23dec3
+ data> 3ju\P\D
+ Partial match: 3ju
+ data> 3juj\P\D
+ No match
+ data> j\P\D
+ No match
+
+ Notice that in this case the portion of the string that was matched is
+ made available.
+
+
+MULTI-SEGMENT MATCHING WITH pcre_dfa_exec()
+
+ When a partial match has been found using pcre_dfa_exec(), it is possi-
+ ble to continue the match by providing additional subject data and
+ calling pcre_dfa_exec() again with the same compiled regular expres-
+ sion, this time setting the PCRE_DFA_RESTART option. You must also pass
+ the same working space as before, because this is where details of the
+ previous partial match are stored. Here is an example using pcretest,
+ using the \R escape sequence to set the PCRE_DFA_RESTART option (\P and
+ \D are as above):
+
+ re> /^\d?\d(jan|feb|mar|apr|may|jun|jul|aug|sep|oct|nov|dec)\d\d$/
+ data> 23ja\P\D
+ Partial match: 23ja
+ data> n05\R\D
+ 0: n05
+
+ The first call has "23ja" as the subject, and requests partial match-
+ ing; the second call has "n05" as the subject for the continued
+ (restarted) match. Notice that when the match is complete, only the
+ last part is shown; PCRE does not retain the previously partially-
+ matched string. It is up to the calling program to do that if it needs
+ to.
+
+ You can set PCRE_PARTIAL with PCRE_DFA_RESTART to continue partial
+ matching over multiple segments. This facility can be used to pass very
+ long subject strings to pcre_dfa_exec(). However, some care is needed
+ for certain types of pattern.
+
+ 1. If the pattern contains tests for the beginning or end of a line,
+ you need to pass the PCRE_NOTBOL or PCRE_NOTEOL options, as appropri-
+ ate, when the subject string for any call does not contain the begin-
+ ning or end of a line.
+
+ 2. If the pattern contains backward assertions (including \b or \B),
+ you need to arrange for some overlap in the subject strings to allow
+ for this. For example, you could pass the subject in chunks that are
+ 500 bytes long, but in a buffer of 700 bytes, with the starting offset
+ set to 200 and the previous 200 bytes at the start of the buffer.
+
+ 3. Matching a subject string that is split into multiple segments does
+ not always produce exactly the same result as matching over one single
+ long string. The difference arises when there are multiple matching
+ possibilities, because a partial match result is given only when there
+ are no completed matches in a call to pcre_dfa_exec(). This means that
+ as soon as the shortest match has been found, continuation to a new
+ subject segment is no longer possible. Consider this pcretest example:
+
+ re> /dog(sbody)?/
+ data> do\P\D
+ Partial match: do
+ data> gsb\R\P\D
+ 0: g
+ data> dogsbody\D
+ 0: dogsbody
+ 1: dog
+
+ The pattern matches the words "dog" or "dogsbody". When the subject is
+ presented in several parts ("do" and "gsb" being the first two) the
+ match stops when "dog" has been found, and it is not possible to con-
+ tinue. On the other hand, if "dogsbody" is presented as a single
+ string, both matches are found.
+
+ Because of this phenomenon, it does not usually make sense to end a
+ pattern that is going to be matched in this way with a variable repeat.
+
+ 4. Patterns that contain alternatives at the top level which do not all
+ start with the same pattern item may not work as expected. For example,
+ consider this pattern:
+
+ 1234|3789
+
+ If the first part of the subject is "ABC123", a partial match of the
+ first alternative is found at offset 3. There is no partial match for
+ the second alternative, because such a match does not start at the same
+ point in the subject string. Attempting to continue with the string
+ "789" does not yield a match because only those alternatives that match
+ at one point in the subject are remembered. The problem arises because
+ the start of the second alternative matches within the first alterna-
+ tive. There is no problem with anchored patterns or patterns such as:
+
+ 1234|ABCD
+
+ where no string can be a partial match for both alternatives.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 04 June 2007
+ Copyright (c) 1997-2007 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREPRECOMPILE(3) PCREPRECOMPILE(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+SAVING AND RE-USING PRECOMPILED PCRE PATTERNS
+
+ If you are running an application that uses a large number of regular
+ expression patterns, it may be useful to store them in a precompiled
+ form instead of having to compile them every time the application is
+ run. If you are not using any private character tables (see the
+ pcre_maketables() documentation), this is relatively straightforward.
+ If you are using private tables, it is a little bit more complicated.
+
+ If you save compiled patterns to a file, you can copy them to a differ-
+ ent host and run them there. This works even if the new host has the
+ opposite endianness to the one on which the patterns were compiled.
+ There may be a small performance penalty, but it should be insignifi-
+ cant. However, compiling regular expressions with one version of PCRE
+ for use with a different version is not guaranteed to work and may
+ cause crashes.
+
+
+SAVING A COMPILED PATTERN
+ The value returned by pcre_compile() points to a single block of memory
+ that holds the compiled pattern and associated data. You can find the
+ length of this block in bytes by calling pcre_fullinfo() with an argu-
+ ment of PCRE_INFO_SIZE. You can then save the data in any appropriate
+ manner. Here is sample code that compiles a pattern and writes it to a
+ file. It assumes that the variable fd refers to a file that is open for
+ output:
+
+ int erroroffset, rc, size;
+ char *error;
+ pcre *re;
+
+ re = pcre_compile("my pattern", 0, &error, &erroroffset, NULL);
+ if (re == NULL) { ... handle errors ... }
+ rc = pcre_fullinfo(re, NULL, PCRE_INFO_SIZE, &size);
+ if (rc < 0) { ... handle errors ... }
+ rc = fwrite(re, 1, size, fd);
+ if (rc != size) { ... handle errors ... }
+
+ In this example, the bytes that comprise the compiled pattern are
+ copied exactly. Note that this is binary data that may contain any of
+ the 256 possible byte values. On systems that make a distinction
+ between binary and non-binary data, be sure that the file is opened for
+ binary output.
+
+ If you want to write more than one pattern to a file, you will have to
+ devise a way of separating them. For binary data, preceding each pat-
+ tern with its length is probably the most straightforward approach.
+ Another possibility is to write out the data in hexadecimal instead of
+ binary, one pattern to a line.
+
+ Saving compiled patterns in a file is only one possible way of storing
+ them for later use. They could equally well be saved in a database, or
+ in the memory of some daemon process that passes them via sockets to
+ the processes that want them.
+
+ If the pattern has been studied, it is also possible to save the study
+ data in a similar way to the compiled pattern itself. When studying
+ generates additional information, pcre_study() returns a pointer to a
+ pcre_extra data block. Its format is defined in the section on matching
+ a pattern in the pcreapi documentation. The study_data field points to
+ the binary study data, and this is what you must save (not the
+ pcre_extra block itself). The length of the study data can be obtained
+ by calling pcre_fullinfo() with an argument of PCRE_INFO_STUDYSIZE.
+ Remember to check that pcre_study() did return a non-NULL value before
+ trying to save the study data.
+
+
+RE-USING A PRECOMPILED PATTERN
+
+ Re-using a precompiled pattern is straightforward. Having reloaded it
+ into main memory, you pass its pointer to pcre_exec() or
+ pcre_dfa_exec() in the usual way. This should work even on another
+ host, and even if that host has the opposite endianness to the one
+ where the pattern was compiled.
+
+ However, if you passed a pointer to custom character tables when the
+ pattern was compiled (the tableptr argument of pcre_compile()), you
+ must now pass a similar pointer to pcre_exec() or pcre_dfa_exec(),
+ because the value saved with the compiled pattern will obviously be
+ nonsense. A field in a pcre_extra() block is used to pass this data, as
+ described in the section on matching a pattern in the pcreapi documen-
+ tation.
+
+ If you did not provide custom character tables when the pattern was
+ compiled, the pointer in the compiled pattern is NULL, which causes
+ pcre_exec() to use PCRE's internal tables. Thus, you do not need to
+ take any special action at run time in this case.
+
+ If you saved study data with the compiled pattern, you need to create
+ your own pcre_extra data block and set the study_data field to point to
+ the reloaded study data. You must also set the PCRE_EXTRA_STUDY_DATA
+ bit in the flags field to indicate that study data is present. Then
+ pass the pcre_extra block to pcre_exec() or pcre_dfa_exec() in the
+ usual way.
+
+
+COMPATIBILITY WITH DIFFERENT PCRE RELEASES
+
+ In general, it is safest to recompile all saved patterns when you
+ update to a new PCRE release, though not all updates actually require
+ this. Recompiling is definitely needed for release 7.2.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 13 June 2007
+ Copyright (c) 1997-2007 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREPERFORM(3) PCREPERFORM(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE PERFORMANCE
+
+ Two aspects of performance are discussed below: memory usage and pro-
+ cessing time. The way you express your pattern as a regular expression
+ can affect both of them.
+
+
+MEMORY USAGE
+
+ Patterns are compiled by PCRE into a reasonably efficient byte code, so
+ that most simple patterns do not use much memory. However, there is one
+ case where memory usage can be unexpectedly large. When a parenthesized
+ subpattern has a quantifier with a minimum greater than 1 and/or a lim-
+ ited maximum, the whole subpattern is repeated in the compiled code.
+ For example, the pattern
+
+ (abc|def){2,4}
+
+ is compiled as if it were
+
+ (abc|def)(abc|def)((abc|def)(abc|def)?)?
+
+ (Technical aside: It is done this way so that backtrack points within
+ each of the repetitions can be independently maintained.)
+
+ For regular expressions whose quantifiers use only small numbers, this
+ is not usually a problem. However, if the numbers are large, and par-
+ ticularly if such repetitions are nested, the memory usage can become
+ an embarrassment. For example, the very simple pattern
+
+ ((ab){1,1000}c){1,3}
+
+ uses 51K bytes when compiled. When PCRE is compiled with its default
+ internal pointer size of two bytes, the size limit on a compiled pat-
+ tern is 64K, and this is reached with the above pattern if the outer
+ repetition is increased from 3 to 4. PCRE can be compiled to use larger
+ internal pointers and thus handle larger compiled patterns, but it is
+ better to try to rewrite your pattern to use less memory if you can.
+
+ One way of reducing the memory usage for such patterns is to make use
+ of PCRE's "subroutine" facility. Re-writing the above pattern as
+
+ ((ab)(?2){0,999}c)(?1){0,2}
+
+ reduces the memory requirements to 18K, and indeed it remains under 20K
+ even with the outer repetition increased to 100. However, this pattern
+ is not exactly equivalent, because the "subroutine" calls are treated
+ as atomic groups into which there can be no backtracking if there is a
+ subsequent matching failure. Therefore, PCRE cannot do this kind of
+ rewriting automatically. Furthermore, there is a noticeable loss of
+ speed when executing the modified pattern. Nevertheless, if the atomic
+ grouping is not a problem and the loss of speed is acceptable, this
+ kind of rewriting will allow you to process patterns that PCRE cannot
+ otherwise handle.
+
+
+PROCESSING TIME
+
+ Certain items in regular expression patterns are processed more effi-
+ ciently than others. It is more efficient to use a character class like
+ [aeiou] than a set of single-character alternatives such as
+ (a|e|i|o|u). In general, the simplest construction that provides the
+ required behaviour is usually the most efficient. Jeffrey Friedl's book
+ contains a lot of useful general discussion about optimizing regular
+ expressions for efficient performance. This document contains a few
+ observations about PCRE.
+
+ Using Unicode character properties (the \p, \P, and \X escapes) is
+ slow, because PCRE has to scan a structure that contains data for over
+ fifteen thousand characters whenever it needs a character's property.
+ If you can find an alternative pattern that does not use character
+ properties, it will probably be faster.
+
+ When a pattern begins with .* not in parentheses, or in parentheses
+ that are not the subject of a backreference, and the PCRE_DOTALL option
+ is set, the pattern is implicitly anchored by PCRE, since it can match
+ only at the start of a subject string. However, if PCRE_DOTALL is not
+ set, PCRE cannot make this optimization, because the . metacharacter
+ does not then match a newline, and if the subject string contains new-
+ lines, the pattern may match from the character immediately following
+ one of them instead of from the very start. For example, the pattern
+
+ .*second
+
+ matches the subject "first\nand second" (where \n stands for a newline
+ character), with the match starting at the seventh character. In order
+ to do this, PCRE has to retry the match starting after every newline in
+ the subject.
+
+ If you are using such a pattern with subject strings that do not con-
+ tain newlines, the best performance is obtained by setting PCRE_DOTALL,
+ or starting the pattern with ^.* or ^.*? to indicate explicit anchor-
+ ing. That saves PCRE from having to scan along the subject looking for
+ a newline to restart at.
+
+ Beware of patterns that contain nested indefinite repeats. These can
+ take a long time to run when applied to a string that does not match.
+ Consider the pattern fragment
+
+ ^(a+)*
+
+ This can match "aaaa" in 16 different ways, and this number increases
+ very rapidly as the string gets longer. (The * repeat can match 0, 1,
+ 2, 3, or 4 times, and for each of those cases other than 0 or 4, the +
+ repeats can match different numbers of times.) When the remainder of
+ the pattern is such that the entire match is going to fail, PCRE has in
+ principle to try every possible variation, and this can take an
+ extremely long time, even for relatively short strings.
+
+ An optimization catches some of the more simple cases such as
+
+ (a+)*b
+
+ where a literal character follows. Before embarking on the standard
+ matching procedure, PCRE checks that there is a "b" later in the sub-
+ ject string, and if there is not, it fails the match immediately. How-
+ ever, when there is no following literal this optimization cannot be
+ used. You can see the difference by comparing the behaviour of
+
+ (a+)*\d
+
+ with the pattern above. The former gives a failure almost instantly
+ when applied to a whole line of "a" characters, whereas the latter
+ takes an appreciable time with strings longer than about 20 characters.
+
+ In many cases, the solution to this kind of performance issue is to use
+ an atomic group or a possessive quantifier.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 06 March 2007
+ Copyright (c) 1997-2007 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCREPOSIX(3) PCREPOSIX(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions.
+
+
+SYNOPSIS OF POSIX API
+
+ #include <pcreposix.h>
+
+ int regcomp(regex_t *preg, const char *pattern,
+ int cflags);
+
+ int regexec(regex_t *preg, const char *string,
+ size_t nmatch, regmatch_t pmatch[], int eflags);
+
+ size_t regerror(int errcode, const regex_t *preg,
+ char *errbuf, size_t errbuf_size);
+
+ void regfree(regex_t *preg);
+
+
+DESCRIPTION
+
+ This set of functions provides a POSIX-style API to the PCRE regular
+ expression package. See the pcreapi documentation for a description of
+ PCRE's native API, which contains much additional functionality.
+
+ The functions described here are just wrapper functions that ultimately
+ call the PCRE native API. Their prototypes are defined in the
+ pcreposix.h header file, and on Unix systems the library itself is
+ called pcreposix.a, so can be accessed by adding -lpcreposix to the
+ command for linking an application that uses them. Because the POSIX
+ functions call the native ones, it is also necessary to add -lpcre.
+
+ I have implemented only those option bits that can be reasonably mapped
+ to PCRE native options. In addition, the option REG_EXTENDED is defined
+ with the value zero. This has no effect, but since programs that are
+ written to the POSIX interface often use it, this makes it easier to
+ slot in PCRE as a replacement library. Other POSIX options are not even
+ defined.
+
+ When PCRE is called via these functions, it is only the API that is
+ POSIX-like in style. The syntax and semantics of the regular expres-
+ sions themselves are still those of Perl, subject to the setting of
+ various PCRE options, as described below. "POSIX-like in style" means
+ that the API approximates to the POSIX definition; it is not fully
+ POSIX-compatible, and in multi-byte encoding domains it is probably
+ even less compatible.
+
+ The header for these functions is supplied as pcreposix.h to avoid any
+ potential clash with other POSIX libraries. It can, of course, be
+ renamed or aliased as regex.h, which is the "correct" name. It provides
+ two structure types, regex_t for compiled internal forms, and reg-
+ match_t for returning captured substrings. It also defines some con-
+ stants whose names start with "REG_"; these are used for setting
+ options and identifying error codes.
+
+
+COMPILING A PATTERN
+
+ The function regcomp() is called to compile a pattern into an internal
+ form. The pattern is a C string terminated by a binary zero, and is
+ passed in the argument pattern. The preg argument is a pointer to a
+ regex_t structure that is used as a base for storing information about
+ the compiled regular expression.
+
+ The argument cflags is either zero, or contains one or more of the bits
+ defined by the following macros:
+
+ REG_DOTALL
+
+ The PCRE_DOTALL option is set when the regular expression is passed for
+ compilation to the native function. Note that REG_DOTALL is not part of
+ the POSIX standard.
+
+ REG_ICASE
+
+ The PCRE_CASELESS option is set when the regular expression is passed
+ for compilation to the native function.
+
+ REG_NEWLINE
+
+ The PCRE_MULTILINE option is set when the regular expression is passed
+ for compilation to the native function. Note that this does not mimic
+ the defined POSIX behaviour for REG_NEWLINE (see the following sec-
+ tion).
+
+ REG_NOSUB
+
+ The PCRE_NO_AUTO_CAPTURE option is set when the regular expression is
+ passed for compilation to the native function. In addition, when a pat-
+ tern that is compiled with this flag is passed to regexec() for match-
+ ing, the nmatch and pmatch arguments are ignored, and no captured
+ strings are returned.
+
+ REG_UTF8
+
+ The PCRE_UTF8 option is set when the regular expression is passed for
+ compilation to the native function. This causes the pattern itself and
+ all data strings used for matching it to be treated as UTF-8 strings.
+ Note that REG_UTF8 is not part of the POSIX standard.
+
+ In the absence of these flags, no options are passed to the native
+ function. This means the the regex is compiled with PCRE default
+ semantics. In particular, the way it handles newline characters in the
+ subject string is the Perl way, not the POSIX way. Note that setting
+ PCRE_MULTILINE has only some of the effects specified for REG_NEWLINE.
+ It does not affect the way newlines are matched by . (they aren't) or
+ by a negative class such as [^a] (they are).
+
+ The yield of regcomp() is zero on success, and non-zero otherwise. The
+ preg structure is filled in on success, and one member of the structure
+ is public: re_nsub contains the number of capturing subpatterns in the
+ regular expression. Various error codes are defined in the header file.
+
+
+MATCHING NEWLINE CHARACTERS
+
+ This area is not simple, because POSIX and Perl take different views of
+ things. It is not possible to get PCRE to obey POSIX semantics, but
+ then PCRE was never intended to be a POSIX engine. The following table
+ lists the different possibilities for matching newline characters in
+ PCRE:
+
+ Default Change with
+
+ . matches newline no PCRE_DOTALL
+ newline matches [^a] yes not changeable
+ $ matches \n at end yes PCRE_DOLLARENDONLY
+ $ matches \n in middle no PCRE_MULTILINE
+ ^ matches \n in middle no PCRE_MULTILINE
+
+ This is the equivalent table for POSIX:
+
+ Default Change with
+
+ . matches newline yes REG_NEWLINE
+ newline matches [^a] yes REG_NEWLINE
+ $ matches \n at end no REG_NEWLINE
+ $ matches \n in middle no REG_NEWLINE
+ ^ matches \n in middle no REG_NEWLINE
+
+ PCRE's behaviour is the same as Perl's, except that there is no equiva-
+ lent for PCRE_DOLLAR_ENDONLY in Perl. In both PCRE and Perl, there is
+ no way to stop newline from matching [^a].
+
+ The default POSIX newline handling can be obtained by setting
+ PCRE_DOTALL and PCRE_DOLLAR_ENDONLY, but there is no way to make PCRE
+ behave exactly as for the REG_NEWLINE action.
+
+
+MATCHING A PATTERN
+
+ The function regexec() is called to match a compiled pattern preg
+ against a given string, which is by default terminated by a zero byte
+ (but see REG_STARTEND below), subject to the options in eflags. These
+ can be:
+
+ REG_NOTBOL
+
+ The PCRE_NOTBOL option is set when calling the underlying PCRE matching
+ function.
+
+ REG_NOTEOL
+
+ The PCRE_NOTEOL option is set when calling the underlying PCRE matching
+ function.
+
+ REG_STARTEND
+
+ The string is considered to start at string + pmatch[0].rm_so and to
+ have a terminating NUL located at string + pmatch[0].rm_eo (there need
+ not actually be a NUL at that location), regardless of the value of
+ nmatch. This is a BSD extension, compatible with but not specified by
+ IEEE Standard 1003.2 (POSIX.2), and should be used with caution in
+ software intended to be portable to other systems. Note that a non-zero
+ rm_so does not imply REG_NOTBOL; REG_STARTEND affects only the location
+ of the string, not how it is matched.
+
+ If the pattern was compiled with the REG_NOSUB flag, no data about any
+ matched strings is returned. The nmatch and pmatch arguments of
+ regexec() are ignored.
+
+ Otherwise,the portion of the string that was matched, and also any cap-
+ tured substrings, are returned via the pmatch argument, which points to
+ an array of nmatch structures of type regmatch_t, containing the mem-
+ bers rm_so and rm_eo. These contain the offset to the first character
+ of each substring and the offset to the first character after the end
+ of each substring, respectively. The 0th element of the vector relates
+ to the entire portion of string that was matched; subsequent elements
+ relate to the capturing subpatterns of the regular expression. Unused
+ entries in the array have both structure members set to -1.
+
+ A successful match yields a zero return; various error codes are
+ defined in the header file, of which REG_NOMATCH is the "expected"
+ failure code.
+
+
+ERROR MESSAGES
+
+ The regerror() function maps a non-zero errorcode from either regcomp()
+ or regexec() to a printable message. If preg is not NULL, the error
+ should have arisen from the use of that structure. A message terminated
+ by a binary zero is placed in errbuf. The length of the message,
+ including the zero, is limited to errbuf_size. The yield of the func-
+ tion is the size of buffer needed to hold the whole message.
+
+
+MEMORY USAGE
+
+ Compiling a regular expression causes memory to be allocated and asso-
+ ciated with the preg structure. The function regfree() frees all such
+ memory, after which preg may no longer be used as a compiled expres-
+ sion.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 05 April 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+
+PCRECPP(3) PCRECPP(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions.
+
+
+SYNOPSIS OF C++ WRAPPER
+
+ #include <pcrecpp.h>
+
+
+DESCRIPTION
+
+ The C++ wrapper for PCRE was provided by Google Inc. Some additional
+ functionality was added by Giuseppe Maxia. This brief man page was con-
+ structed from the notes in the pcrecpp.h file, which should be con-
+ sulted for further details.
+
+
+MATCHING INTERFACE
+
+ The "FullMatch" operation checks that supplied text matches a supplied
+ pattern exactly. If pointer arguments are supplied, it copies matched
+ sub-strings that match sub-patterns into them.
+
+ Example: successful match
+ pcrecpp::RE re("h.*o");
+ re.FullMatch("hello");
+
+ Example: unsuccessful match (requires full match):
+ pcrecpp::RE re("e");
+ !re.FullMatch("hello");
+
+ Example: creating a temporary RE object:
+ pcrecpp::RE("h.*o").FullMatch("hello");
+
+ You can pass in a "const char*" or a "string" for "text". The examples
+ below tend to use a const char*. You can, as in the different examples
+ above, store the RE object explicitly in a variable or use a temporary
+ RE object. The examples below use one mode or the other arbitrarily.
+ Either could correctly be used for any of these examples.
+
+ You must supply extra pointer arguments to extract matched subpieces.
+
+ Example: extracts "ruby" into "s" and 1234 into "i"
+ int i;
+ string s;
+ pcrecpp::RE re("(\\w+):(\\d+)");
+ re.FullMatch("ruby:1234", &s, &i);
+
+ Example: does not try to extract any extra sub-patterns
+ re.FullMatch("ruby:1234", &s);
+
+ Example: does not try to extract into NULL
+ re.FullMatch("ruby:1234", NULL, &i);
+
+ Example: integer overflow causes failure
+ !re.FullMatch("ruby:1234567891234", NULL, &i);
+
+ Example: fails because there aren't enough sub-patterns:
+ !pcrecpp::RE("\\w+:\\d+").FullMatch("ruby:1234", &s);
+
+ Example: fails because string cannot be stored in integer
+ !pcrecpp::RE("(.*)").FullMatch("ruby", &i);
+
+ The provided pointer arguments can be pointers to any scalar numeric
+ type, or one of:
+
+ string (matched piece is copied to string)
+ StringPiece (StringPiece is mutated to point to matched piece)
+ T (where "bool T::ParseFrom(const char*, int)" exists)
+ NULL (the corresponding matched sub-pattern is not copied)
+
+ The function returns true iff all of the following conditions are sat-
+ isfied:
+
+ a. "text" matches "pattern" exactly;
+
+ b. The number of matched sub-patterns is >= number of supplied
+ pointers;
+
+ c. The "i"th argument has a suitable type for holding the
+ string captured as the "i"th sub-pattern. If you pass in
+ void * NULL for the "i"th argument, or a non-void * NULL
+ of the correct type, or pass fewer arguments than the
+ number of sub-patterns, "i"th captured sub-pattern is
+ ignored.
+
+ CAVEAT: An optional sub-pattern that does not exist in the matched
+ string is assigned the empty string. Therefore, the following will
+ return false (because the empty string is not a valid number):
+
+ int number;
+ pcrecpp::RE::FullMatch("abc", "[a-z]+(\\d+)?", &number);
+
+ The matching interface supports at most 16 arguments per call. If you
+ need more, consider using the more general interface
+ pcrecpp::RE::DoMatch. See pcrecpp.h for the signature for DoMatch.
+
+
+QUOTING METACHARACTERS
+
+ You can use the "QuoteMeta" operation to insert backslashes before all
+ potentially meaningful characters in a string. The returned string,
+ used as a regular expression, will exactly match the original string.
+
+ Example:
+ string quoted = RE::QuoteMeta(unquoted);
+
+ Note that it's legal to escape a character even if it has no special
+ meaning in a regular expression -- so this function does that. (This
+ also makes it identical to the perl function of the same name; see
+ "perldoc -f quotemeta".) For example, "1.5-2.0?" becomes
+ "1\.5\-2\.0\?".
+
+
+PARTIAL MATCHES
+
+ You can use the "PartialMatch" operation when you want the pattern to
+ match any substring of the text.
+
+ Example: simple search for a string:
+ pcrecpp::RE("ell").PartialMatch("hello");
+
+ Example: find first number in a string:
+ int number;
+ pcrecpp::RE re("(\\d+)");
+ re.PartialMatch("x*100 + 20", &number);
+ assert(number == 100);
+
+
+UTF-8 AND THE MATCHING INTERFACE
+
+ By default, pattern and text are plain text, one byte per character.
+ The UTF8 flag, passed to the constructor, causes both pattern and
+ string to be treated as UTF-8 text, still a byte stream but potentially
+ multiple bytes per character. In practice, the text is likelier to be
+ UTF-8 than the pattern, but the match returned may depend on the UTF8
+ flag, so always use it when matching UTF8 text. For example, "." will
+ match one byte normally but with UTF8 set may match up to three bytes
+ of a multi-byte character.
+
+ Example:
+ pcrecpp::RE_Options options;
+ options.set_utf8();
+ pcrecpp::RE re(utf8_pattern, options);
+ re.FullMatch(utf8_string);
+
+ Example: using the convenience function UTF8():
+ pcrecpp::RE re(utf8_pattern, pcrecpp::UTF8());
+ re.FullMatch(utf8_string);
+
+ NOTE: The UTF8 flag is ignored if pcre was not configured with the
+ --enable-utf8 flag.
+
+
+PASSING MODIFIERS TO THE REGULAR EXPRESSION ENGINE
+
+ PCRE defines some modifiers to change the behavior of the regular
+ expression engine. The C++ wrapper defines an auxiliary class,
+ RE_Options, as a vehicle to pass such modifiers to a RE class. Cur-
+ rently, the following modifiers are supported:
+
+ modifier description Perl corresponding
+
+ PCRE_CASELESS case insensitive match /i
+ PCRE_MULTILINE multiple lines match /m
+ PCRE_DOTALL dot matches newlines /s
+ PCRE_DOLLAR_ENDONLY $ matches only at end N/A
+ PCRE_EXTRA strict escape parsing N/A
+ PCRE_EXTENDED ignore whitespaces /x
+ PCRE_UTF8 handles UTF8 chars built-in
+ PCRE_UNGREEDY reverses * and *? N/A
+ PCRE_NO_AUTO_CAPTURE disables capturing parens N/A (*)
+
+ (*) Both Perl and PCRE allow non capturing parentheses by means of the
+ "?:" modifier within the pattern itself. e.g. (?:ab|cd) does not cap-
+ ture, while (ab|cd) does.
+
+ For a full account on how each modifier works, please check the PCRE
+ API reference page.
+
+ For each modifier, there are two member functions whose name is made
+ out of the modifier in lowercase, without the "PCRE_" prefix. For
+ instance, PCRE_CASELESS is handled by
+
+ bool caseless()
+
+ which returns true if the modifier is set, and
+
+ RE_Options & set_caseless(bool)
+
+ which sets or unsets the modifier. Moreover, PCRE_EXTRA_MATCH_LIMIT can
+ be accessed through the set_match_limit() and match_limit() member
+ functions. Setting match_limit to a non-zero value will limit the exe-
+ cution of pcre to keep it from doing bad things like blowing the stack
+ or taking an eternity to return a result. A value of 5000 is good
+ enough to stop stack blowup in a 2MB thread stack. Setting match_limit
+ to zero disables match limiting. Alternatively, you can call
+ match_limit_recursion() which uses PCRE_EXTRA_MATCH_LIMIT_RECURSION to
+ limit how much PCRE recurses. match_limit() limits the number of
+ matches PCRE does; match_limit_recursion() limits the depth of internal
+ recursion, and therefore the amount of stack that is used.
+
+ Normally, to pass one or more modifiers to a RE class, you declare a
+ RE_Options object, set the appropriate options, and pass this object to
+ a RE constructor. Example:
+
+ RE_options opt;
+ opt.set_caseless(true);
+ if (RE("HELLO", opt).PartialMatch("hello world")) ...
+
+ RE_options has two constructors. The default constructor takes no argu-
+ ments and creates a set of flags that are off by default. The optional
+ parameter option_flags is to facilitate transfer of legacy code from C
+ programs. This lets you do
+
+ RE(pattern,
+ RE_Options(PCRE_CASELESS|PCRE_MULTILINE)).PartialMatch(str);
+
+ However, new code is better off doing
+
+ RE(pattern,
+ RE_Options().set_caseless(true).set_multiline(true))
+ .PartialMatch(str);
+
+ If you are going to pass one of the most used modifiers, there are some
+ convenience functions that return a RE_Options class with the appropri-
+ ate modifier already set: CASELESS(), UTF8(), MULTILINE(), DOTALL(),
+ and EXTENDED().
+
+ If you need to set several options at once, and you don't want to go
+ through the pains of declaring a RE_Options object and setting several
+ options, there is a parallel method that give you such ability on the
+ fly. You can concatenate several set_xxxxx() member functions, since
+ each of them returns a reference to its class object. For example, to
+ pass PCRE_CASELESS, PCRE_EXTENDED, and PCRE_MULTILINE to a RE with one
+ statement, you may write:
+
+ RE(" ^ xyz \\s+ .* blah$",
+ RE_Options()
+ .set_caseless(true)
+ .set_extended(true)
+ .set_multiline(true)).PartialMatch(sometext);
+
+
+SCANNING TEXT INCREMENTALLY
+
+ The "Consume" operation may be useful if you want to repeatedly match
+ regular expressions at the front of a string and skip over them as they
+ match. This requires use of the "StringPiece" type, which represents a
+ sub-range of a real string. Like RE, StringPiece is defined in the
+ pcrecpp namespace.
+
+ Example: read lines of the form "var = value" from a string.
+ string contents = ...; // Fill string somehow
+ pcrecpp::StringPiece input(contents); // Wrap in a StringPiece
+
+ string var;
+ int value;
+ pcrecpp::RE re("(\\w+) = (\\d+)\n");
+ while (re.Consume(&input, &var, &value)) {
+ ...;
+ }
+
+ Each successful call to "Consume" will set "var/value", and also
+ advance "input" so it points past the matched text.
+
+ The "FindAndConsume" operation is similar to "Consume" but does not
+ anchor your match at the beginning of the string. For example, you
+ could extract all words from a string by repeatedly calling
+
+ pcrecpp::RE("(\\w+)").FindAndConsume(&input, &word)
+
+
+PARSING HEX/OCTAL/C-RADIX NUMBERS
+
+ By default, if you pass a pointer to a numeric value, the corresponding
+ text is interpreted as a base-10 number. You can instead wrap the
+ pointer with a call to one of the operators Hex(), Octal(), or CRadix()
+ to interpret the text in another base. The CRadix operator interprets
+ C-style "0" (base-8) and "0x" (base-16) prefixes, but defaults to
+ base-10.
+
+ Example:
+ int a, b, c, d;
+ pcrecpp::RE re("(.*) (.*) (.*) (.*)");
+ re.FullMatch("100 40 0100 0x40",
+ pcrecpp::Octal(&a), pcrecpp::Hex(&b),
+ pcrecpp::CRadix(&c), pcrecpp::CRadix(&d));
+
+ will leave 64 in a, b, c, and d.
+
+
+REPLACING PARTS OF STRINGS
+
+ You can replace the first match of "pattern" in "str" with "rewrite".
+ Within "rewrite", backslash-escaped digits (\1 to \9) can be used to
+ insert text matching corresponding parenthesized group from the pat-
+ tern. \0 in "rewrite" refers to the entire matching text. For example:
+
+ string s = "yabba dabba doo";
+ pcrecpp::RE("b+").Replace("d", &s);
+
+ will leave "s" containing "yada dabba doo". The result is true if the
+ pattern matches and a replacement occurs, false otherwise.
+
+ GlobalReplace is like Replace except that it replaces all occurrences
+ of the pattern in the string with the rewrite. Replacements are not
+ subject to re-matching. For example:
+
+ string s = "yabba dabba doo";
+ pcrecpp::RE("b+").GlobalReplace("d", &s);
+
+ will leave "s" containing "yada dada doo". It returns the number of
+ replacements made.
+
+ Extract is like Replace, except that if the pattern matches, "rewrite"
+ is copied into "out" (an additional argument) with substitutions. The
+ non-matching portions of "text" are ignored. Returns true iff a match
+ occurred and the extraction happened successfully; if no match occurs,
+ the string is left unaffected.
+
+
+AUTHOR
+
+ The C++ wrapper was contributed by Google Inc.
+ Copyright (c) 2007 Google Inc.
+
+
+REVISION
+
+ Last updated: 12 November 2007
+------------------------------------------------------------------------------
+
+
+PCRESAMPLE(3) PCRESAMPLE(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE SAMPLE PROGRAM
+
+ A simple, complete demonstration program, to get you started with using
+ PCRE, is supplied in the file pcredemo.c in the PCRE distribution.
+
+ The program compiles the regular expression that is its first argument,
+ and matches it against the subject string in its second argument. No
+ PCRE options are set, and default character tables are used. If match-
+ ing succeeds, the program outputs the portion of the subject that
+ matched, together with the contents of any captured substrings.
+
+ If the -g option is given on the command line, the program then goes on
+ to check for further matches of the same regular expression in the same
+ subject string. The logic is a little bit tricky because of the possi-
+ bility of matching an empty string. Comments in the code explain what
+ is going on.
+
+ If PCRE is installed in the standard include and library directories
+ for your system, you should be able to compile the demonstration pro-
+ gram using this command:
+
+ gcc -o pcredemo pcredemo.c -lpcre
+
+ If PCRE is installed elsewhere, you may need to add additional options
+ to the command line. For example, on a Unix-like system that has PCRE
+ installed in /usr/local, you can compile the demonstration program
+ using a command like this:
+
+ gcc -o pcredemo -I/usr/local/include pcredemo.c \
+ -L/usr/local/lib -lpcre
+
+ Once you have compiled the demonstration program, you can run simple
+ tests like this:
+
+ ./pcredemo 'cat|dog' 'the cat sat on the mat'
+ ./pcredemo -g 'cat|dog' 'the dog sat on the cat'
+
+ Note that there is a much more comprehensive test program, called
+ pcretest, which supports many more facilities for testing regular
+ expressions and the PCRE library. The pcredemo program is provided as a
+ simple coding example.
+
+ On some operating systems (e.g. Solaris), when PCRE is not installed in
+ the standard library directory, you may get an error like this when you
+ try to run pcredemo:
+
+ ld.so.1: a.out: fatal: libpcre.so.0: open failed: No such file or
+ directory
+
+ This is caused by the way shared library support works on those sys-
+ tems. You need to add
+
+ -R/usr/local/lib
+
+ (for example) to the compile command to get round this problem.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 23 January 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+PCRESTACK(3) PCRESTACK(3)
+
+
+NAME
+ PCRE - Perl-compatible regular expressions
+
+
+PCRE DISCUSSION OF STACK USAGE
+
+ When you call pcre_exec(), it makes use of an internal function called
+ match(). This calls itself recursively at branch points in the pattern,
+ in order to remember the state of the match so that it can back up and
+ try a different alternative if the first one fails. As matching pro-
+ ceeds deeper and deeper into the tree of possibilities, the recursion
+ depth increases.
+
+ Not all calls of match() increase the recursion depth; for an item such
+ as a* it may be called several times at the same level, after matching
+ different numbers of a's. Furthermore, in a number of cases where the
+ result of the recursive call would immediately be passed back as the
+ result of the current call (a "tail recursion"), the function is just
+ restarted instead.
+
+ The pcre_dfa_exec() function operates in an entirely different way, and
+ hardly uses recursion at all. The limit on its complexity is the amount
+ of workspace it is given. The comments that follow do NOT apply to
+ pcre_dfa_exec(); they are relevant only for pcre_exec().
+
+ You can set limits on the number of times that match() is called, both
+ in total and recursively. If the limit is exceeded, an error occurs.
+ For details, see the section on extra data for pcre_exec() in the
+ pcreapi documentation.
+
+ Each time that match() is actually called recursively, it uses memory
+ from the process stack. For certain kinds of pattern and data, very
+ large amounts of stack may be needed, despite the recognition of "tail
+ recursion". You can often reduce the amount of recursion, and there-
+ fore the amount of stack used, by modifying the pattern that is being
+ matched. Consider, for example, this pattern:
+
+ ([^<]|<(?!inet))+
+
+ It matches from wherever it starts until it encounters "<inet" or the
+ end of the data, and is the kind of pattern that might be used when
+ processing an XML file. Each iteration of the outer parentheses matches
+ either one character that is not "<" or a "<" that is not followed by
+ "inet". However, each time a parenthesis is processed, a recursion
+ occurs, so this formulation uses a stack frame for each matched charac-
+ ter. For a long string, a lot of stack is required. Consider now this
+ rewritten pattern, which matches exactly the same strings:
+
+ ([^<]++|<(?!inet))+
+
+ This uses very much less stack, because runs of characters that do not
+ contain "<" are "swallowed" in one item inside the parentheses. Recur-
+ sion happens only when a "<" character that is not followed by "inet"
+ is encountered (and we assume this is relatively rare). A possessive
+ quantifier is used to stop any backtracking into the runs of non-"<"
+ characters, but that is not related to stack usage.
+
+ This example shows that one way of avoiding stack problems when match-
+ ing long subject strings is to write repeated parenthesized subpatterns
+ to match more than one character whenever possible.
+
+ Compiling PCRE to use heap instead of stack
+
+ In environments where stack memory is constrained, you might want to
+ compile PCRE to use heap memory instead of stack for remembering back-
+ up points. This makes it run a lot more slowly, however. Details of how
+ to do this are given in the pcrebuild documentation. When built in this
+ way, instead of using the stack, PCRE obtains and frees memory by call-
+ ing the functions that are pointed to by the pcre_stack_malloc and
+ pcre_stack_free variables. By default, these point to malloc() and
+ free(), but you can replace the pointers to cause PCRE to use your own
+ functions. Since the block sizes are always the same, and are always
+ freed in reverse order, it may be possible to implement customized mem-
+ ory handlers that are more efficient than the standard functions.
+
+ Limiting PCRE's stack usage
+
+ PCRE has an internal counter that can be used to limit the depth of
+ recursion, and thus cause pcre_exec() to give an error code before it
+ runs out of stack. By default, the limit is very large, and unlikely
+ ever to operate. It can be changed when PCRE is built, and it can also
+ be set when pcre_exec() is called. For details of these interfaces, see
+ the pcrebuild and pcreapi documentation.
+
+ As a very rough rule of thumb, you should reckon on about 500 bytes per
+ recursion. Thus, if you want to limit your stack usage to 8Mb, you
+ should set the limit at 16000 recursions. A 64Mb stack, on the other
+ hand, can support around 128000 recursions. The pcretest test program
+ has a command line option (-S) that can be used to increase the size of
+ its stack.
+
+ Changing stack size in Unix-like systems
+
+ In Unix-like environments, there is not often a problem with the stack
+ unless very long strings are involved, though the default limit on
+ stack size varies from system to system. Values from 8Mb to 64Mb are
+ common. You can find your default limit by running the command:
+
+ ulimit -s
+
+ Unfortunately, the effect of running out of stack is often SIGSEGV,
+ though sometimes a more explicit error message is given. You can nor-
+ mally increase the limit on stack size by code such as this:
+
+ struct rlimit rlim;
+ getrlimit(RLIMIT_STACK, &rlim);
+ rlim.rlim_cur = 100*1024*1024;
+ setrlimit(RLIMIT_STACK, &rlim);
+
+ This reads the current limits (soft and hard) using getrlimit(), then
+ attempts to increase the soft limit to 100Mb using setrlimit(). You
+ must do this before calling pcre_exec().
+
+ Changing stack size in Mac OS X
+
+ Using setrlimit(), as described above, should also work on Mac OS X. It
+ is also possible to set a stack size when linking a program. There is a
+ discussion about stack sizes in Mac OS X at this web site:
+ http://developer.apple.com/qa/qa2005/qa1419.html.
+
+
+AUTHOR
+
+ Philip Hazel
+ University Computing Service
+ Cambridge CB2 3QH, England.
+
+
+REVISION
+
+ Last updated: 09 July 2008
+ Copyright (c) 1997-2008 University of Cambridge.
+------------------------------------------------------------------------------
+
+