--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/libraries/spcre/libpcre/pcre/pcretest.c Wed Jun 23 15:52:26 2010 +0100
@@ -0,0 +1,2476 @@
+/*************************************************
+* PCRE testing program *
+*************************************************/
+
+/* This program was hacked up as a tester for PCRE. I really should have
+written it more tidily in the first place. Will I ever learn? It has grown and
+been extended and consequently is now rather, er, *very* untidy in places.
+
+-----------------------------------------------------------------------------
+Redistribution and use in source and binary forms, with or without
+modification, are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice,
+ this list of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright
+ notice, this list of conditions and the following disclaimer in the
+ documentation and/or other materials provided with the distribution.
+
+ * Neither the name of the University of Cambridge nor the names of its
+ contributors may be used to endorse or promote products derived from
+ this software without specific prior written permission.
+
+THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGE.
+-----------------------------------------------------------------------------
+*/
+
+
+#ifdef HAVE_CONFIG_H
+#include "config.h"
+#endif
+
+#include <ctype.h>
+#include <stdio.h>
+#include <string.h>
+#include <stdlib.h>
+#include <time.h>
+#include <locale.h>
+#include <errno.h>
+
+#ifdef SUPPORT_LIBREADLINE
+#ifdef HAVE_UNISTD_H
+#include <unistd.h>
+#endif
+#include <readline/readline.h>
+#include <readline/history.h>
+#endif
+
+
+/* A number of things vary for Windows builds. Originally, pcretest opened its
+input and output without "b"; then I was told that "b" was needed in some
+environments, so it was added for release 5.0 to both the input and output. (It
+makes no difference on Unix-like systems.) Later I was told that it is wrong
+for the input on Windows. I've now abstracted the modes into two macros that
+are set here, to make it easier to fiddle with them, and removed "b" from the
+input mode under Windows. */
+
+#if defined(_WIN32) || defined(WIN32)
+#include <io.h> /* For _setmode() */
+#include <fcntl.h> /* For _O_BINARY */
+#define INPUT_MODE "r"
+#define OUTPUT_MODE "wb"
+
+#define isatty _isatty /* This is what Windows calls them, I'm told */
+#define fileno _fileno
+
+#else
+#include <sys/time.h> /* These two includes are needed */
+#include <sys/resource.h> /* for setrlimit(). */
+#define INPUT_MODE "rb"
+#define OUTPUT_MODE "wb"
+#endif
+
+
+/* We have to include pcre_internal.h because we need the internal info for
+displaying the results of pcre_study() and we also need to know about the
+internal macros, structures, and other internal data values; pcretest has
+"inside information" compared to a program that strictly follows the PCRE API.
+
+Although pcre_internal.h does itself include pcre.h, we explicitly include it
+here before pcre_internal.h so that the PCRE_EXP_xxx macros get set
+appropriately for an application, not for building PCRE. */
+
+#include "pcre.h"
+#include "pcre_internal.h"
+
+/* We need access to some of the data tables that PCRE uses. So as not to have
+to keep two copies, we include the source file here, changing the names of the
+external symbols to prevent clashes. */
+
+#define _pcre_ucp_gentype ucp_gentype
+#define _pcre_utf8_table1 utf8_table1
+#define _pcre_utf8_table1_size utf8_table1_size
+#define _pcre_utf8_table2 utf8_table2
+#define _pcre_utf8_table3 utf8_table3
+#define _pcre_utf8_table4 utf8_table4
+#define _pcre_utt utt
+#define _pcre_utt_size utt_size
+#define _pcre_utt_names utt_names
+#define _pcre_OP_lengths OP_lengths
+
+#include "pcre_tables.c"
+
+/* We also need the pcre_printint() function for printing out compiled
+patterns. This function is in a separate file so that it can be included in
+pcre_compile.c when that module is compiled with debugging enabled.
+
+The definition of the macro PRINTABLE, which determines whether to print an
+output character as-is or as a hex value when showing compiled patterns, is
+contained in this file. We uses it here also, in cases when the locale has not
+been explicitly changed, so as to get consistent output from systems that
+differ in their output from isprint() even in the "C" locale. */
+
+#include "pcre_printint.src"
+
+#define PRINTHEX(c) (locale_set? isprint(c) : PRINTABLE(c))
+
+
+/* It is possible to compile this test program without including support for
+testing the POSIX interface, though this is not available via the standard
+Makefile. */
+
+#if !defined NOPOSIX
+#include "pcreposix.h"
+#endif
+
+/* It is also possible, for the benefit of the version currently imported into
+Exim, to build pcretest without support for UTF8 (define NOUTF8), without the
+interface to the DFA matcher (NODFA), and without the doublecheck of the old
+"info" function (define NOINFOCHECK). In fact, we automatically cut out the
+UTF8 support if PCRE is built without it. */
+
+#ifndef SUPPORT_UTF8
+#ifndef NOUTF8
+#define NOUTF8
+#endif
+#endif
+
+
+/* Other parameters */
+
+#ifndef CLOCKS_PER_SEC
+#ifdef CLK_TCK
+#define CLOCKS_PER_SEC CLK_TCK
+#else
+#define CLOCKS_PER_SEC 100
+#endif
+#endif
+
+/* This is the default loop count for timing. */
+
+#define LOOPREPEAT 500000
+
+/* Static variables */
+
+static FILE *outfile;
+static int log_store = 0;
+static int callout_count;
+static int callout_extra;
+static int callout_fail_count;
+static int callout_fail_id;
+static int debug_lengths;
+static int first_callout;
+static int locale_set = 0;
+static int show_malloc;
+static int use_utf8;
+static size_t gotten_store;
+
+/* The buffers grow automatically if very long input lines are encountered. */
+
+static int buffer_size = 50000;
+static uschar *buffer = NULL;
+static uschar *dbuffer = NULL;
+static uschar *pbuffer = NULL;
+
+
+
+/*************************************************
+* Read or extend an input line *
+*************************************************/
+
+/* Input lines are read into buffer, but both patterns and data lines can be
+continued over multiple input lines. In addition, if the buffer fills up, we
+want to automatically expand it so as to be able to handle extremely large
+lines that are needed for certain stress tests. When the input buffer is
+expanded, the other two buffers must also be expanded likewise, and the
+contents of pbuffer, which are a copy of the input for callouts, must be
+preserved (for when expansion happens for a data line). This is not the most
+optimal way of handling this, but hey, this is just a test program!
+
+Arguments:
+ f the file to read
+ start where in buffer to start (this *must* be within buffer)
+ prompt for stdin or readline()
+
+Returns: pointer to the start of new data
+ could be a copy of start, or could be moved
+ NULL if no data read and EOF reached
+*/
+
+static uschar *
+extend_inputline(FILE *f, uschar *start, const char *prompt)
+{
+uschar *here = start;
+
+for (;;)
+ {
+ int rlen = buffer_size - (here - buffer);
+
+ if (rlen > 1000)
+ {
+ int dlen;
+
+ /* If libreadline support is required, use readline() to read a line if the
+ input is a terminal. Note that readline() removes the trailing newline, so
+ we must put it back again, to be compatible with fgets(). */
+
+#ifdef SUPPORT_LIBREADLINE
+ if (isatty(fileno(f)))
+ {
+ size_t len;
+ char *s = readline(prompt);
+ if (s == NULL) return (here == start)? NULL : start;
+ len = strlen(s);
+ if (len > 0) add_history(s);
+ if (len > rlen - 1) len = rlen - 1;
+ memcpy(here, s, len);
+ here[len] = '\n';
+ here[len+1] = 0;
+ free(s);
+ }
+ else
+#endif
+
+ /* Read the next line by normal means, prompting if the file is stdin. */
+
+ {
+ if (f == stdin) printf(prompt);
+ if (fgets((char *)here, rlen, f) == NULL)
+ return (here == start)? NULL : start;
+ }
+
+ dlen = (int)strlen((char *)here);
+ if (dlen > 0 && here[dlen - 1] == '\n') return start;
+ here += dlen;
+ }
+
+ else
+ {
+ int new_buffer_size = 2*buffer_size;
+ uschar *new_buffer = (unsigned char *)malloc(new_buffer_size);
+ uschar *new_dbuffer = (unsigned char *)malloc(new_buffer_size);
+ uschar *new_pbuffer = (unsigned char *)malloc(new_buffer_size);
+
+ if (new_buffer == NULL || new_dbuffer == NULL || new_pbuffer == NULL)
+ {
+ fprintf(stderr, "pcretest: malloc(%d) failed\n", new_buffer_size);
+ exit(1);
+ }
+
+ memcpy(new_buffer, buffer, buffer_size);
+ memcpy(new_pbuffer, pbuffer, buffer_size);
+
+ buffer_size = new_buffer_size;
+
+ start = new_buffer + (start - buffer);
+ here = new_buffer + (here - buffer);
+
+ free(buffer);
+ free(dbuffer);
+ free(pbuffer);
+
+ buffer = new_buffer;
+ dbuffer = new_dbuffer;
+ pbuffer = new_pbuffer;
+ }
+ }
+
+return NULL; /* Control never gets here */
+}
+
+
+
+
+
+
+
+/*************************************************
+* Read number from string *
+*************************************************/
+
+/* We don't use strtoul() because SunOS4 doesn't have it. Rather than mess
+around with conditional compilation, just do the job by hand. It is only used
+for unpicking arguments, so just keep it simple.
+
+Arguments:
+ str string to be converted
+ endptr where to put the end pointer
+
+Returns: the unsigned long
+*/
+
+static int
+get_value(unsigned char *str, unsigned char **endptr)
+{
+int result = 0;
+while(*str != 0 && isspace(*str)) str++;
+while (isdigit(*str)) result = result * 10 + (int)(*str++ - '0');
+*endptr = str;
+return(result);
+}
+
+
+
+
+/*************************************************
+* Convert UTF-8 string to value *
+*************************************************/
+
+/* This function takes one or more bytes that represents a UTF-8 character,
+and returns the value of the character.
+
+Argument:
+ utf8bytes a pointer to the byte vector
+ vptr a pointer to an int to receive the value
+
+Returns: > 0 => the number of bytes consumed
+ -6 to 0 => malformed UTF-8 character at offset = (-return)
+*/
+
+#if !defined NOUTF8
+
+static int
+utf82ord(unsigned char *utf8bytes, int *vptr)
+{
+int c = *utf8bytes++;
+int d = c;
+int i, j, s;
+
+for (i = -1; i < 6; i++) /* i is number of additional bytes */
+ {
+ if ((d & 0x80) == 0) break;
+ d <<= 1;
+ }
+
+if (i == -1) { *vptr = c; return 1; } /* ascii character */
+if (i == 0 || i == 6) return 0; /* invalid UTF-8 */
+
+/* i now has a value in the range 1-5 */
+
+s = 6*i;
+d = (c & utf8_table3[i]) << s;
+
+for (j = 0; j < i; j++)
+ {
+ c = *utf8bytes++;
+ if ((c & 0xc0) != 0x80) return -(j+1);
+ s -= 6;
+ d |= (c & 0x3f) << s;
+ }
+
+/* Check that encoding was the correct unique one */
+
+for (j = 0; j < utf8_table1_size; j++)
+ if (d <= utf8_table1[j]) break;
+if (j != i) return -(i+1);
+
+/* Valid value */
+
+*vptr = d;
+return i+1;
+}
+
+#endif
+
+
+
+/*************************************************
+* Convert character value to UTF-8 *
+*************************************************/
+
+/* This function takes an integer value in the range 0 - 0x7fffffff
+and encodes it as a UTF-8 character in 0 to 6 bytes.
+
+Arguments:
+ cvalue the character value
+ utf8bytes pointer to buffer for result - at least 6 bytes long
+
+Returns: number of characters placed in the buffer
+*/
+
+#if !defined NOUTF8
+
+static int
+ord2utf8(int cvalue, uschar *utf8bytes)
+{
+register int i, j;
+for (i = 0; i < utf8_table1_size; i++)
+ if (cvalue <= utf8_table1[i]) break;
+utf8bytes += i;
+for (j = i; j > 0; j--)
+ {
+ *utf8bytes-- = 0x80 | (cvalue & 0x3f);
+ cvalue >>= 6;
+ }
+*utf8bytes = utf8_table2[i] | cvalue;
+return i + 1;
+}
+
+#endif
+
+
+
+/*************************************************
+* Print character string *
+*************************************************/
+
+/* Character string printing function. Must handle UTF-8 strings in utf8
+mode. Yields number of characters printed. If handed a NULL file, just counts
+chars without printing. */
+
+static int pchars(unsigned char *p, int length, FILE *f)
+{
+int c = 0;
+int yield = 0;
+
+while (length-- > 0)
+ {
+#if !defined NOUTF8
+ if (use_utf8)
+ {
+ int rc = utf82ord(p, &c);
+
+ if (rc > 0 && rc <= length + 1) /* Mustn't run over the end */
+ {
+ length -= rc - 1;
+ p += rc;
+ if (PRINTHEX(c))
+ {
+ if (f != NULL) fprintf(f, "%c", c);
+ yield++;
+ }
+ else
+ {
+ int n = 4;
+ if (f != NULL) fprintf(f, "\\x{%02x}", c);
+ yield += (n <= 0x000000ff)? 2 :
+ (n <= 0x00000fff)? 3 :
+ (n <= 0x0000ffff)? 4 :
+ (n <= 0x000fffff)? 5 : 6;
+ }
+ continue;
+ }
+ }
+#endif
+
+ /* Not UTF-8, or malformed UTF-8 */
+
+ c = *p++;
+ if (PRINTHEX(c))
+ {
+ if (f != NULL) fprintf(f, "%c", c);
+ yield++;
+ }
+ else
+ {
+ if (f != NULL) fprintf(f, "\\x%02x", c);
+ yield += 4;
+ }
+ }
+
+return yield;
+}
+
+
+
+/*************************************************
+* Callout function *
+*************************************************/
+
+/* Called from PCRE as a result of the (?C) item. We print out where we are in
+the match. Yield zero unless more callouts than the fail count, or the callout
+data is not zero. */
+
+static int callout(pcre_callout_block *cb)
+{
+FILE *f = (first_callout | callout_extra)? outfile : NULL;
+int i, pre_start, post_start, subject_length;
+
+if (callout_extra)
+ {
+ fprintf(f, "Callout %d: last capture = %d\n",
+ cb->callout_number, cb->capture_last);
+
+ for (i = 0; i < cb->capture_top * 2; i += 2)
+ {
+ if (cb->offset_vector[i] < 0)
+ fprintf(f, "%2d: <unset>\n", i/2);
+ else
+ {
+ fprintf(f, "%2d: ", i/2);
+ (void)pchars((unsigned char *)cb->subject + cb->offset_vector[i],
+ cb->offset_vector[i+1] - cb->offset_vector[i], f);
+ fprintf(f, "\n");
+ }
+ }
+ }
+
+/* Re-print the subject in canonical form, the first time or if giving full
+datails. On subsequent calls in the same match, we use pchars just to find the
+printed lengths of the substrings. */
+
+if (f != NULL) fprintf(f, "--->");
+
+pre_start = pchars((unsigned char *)cb->subject, cb->start_match, f);
+post_start = pchars((unsigned char *)(cb->subject + cb->start_match),
+ cb->current_position - cb->start_match, f);
+
+subject_length = pchars((unsigned char *)cb->subject, cb->subject_length, NULL);
+
+(void)pchars((unsigned char *)(cb->subject + cb->current_position),
+ cb->subject_length - cb->current_position, f);
+
+if (f != NULL) fprintf(f, "\n");
+
+/* Always print appropriate indicators, with callout number if not already
+shown. For automatic callouts, show the pattern offset. */
+
+if (cb->callout_number == 255)
+ {
+ fprintf(outfile, "%+3d ", cb->pattern_position);
+ if (cb->pattern_position > 99) fprintf(outfile, "\n ");
+ }
+else
+ {
+ if (callout_extra) fprintf(outfile, " ");
+ else fprintf(outfile, "%3d ", cb->callout_number);
+ }
+
+for (i = 0; i < pre_start; i++) fprintf(outfile, " ");
+fprintf(outfile, "^");
+
+if (post_start > 0)
+ {
+ for (i = 0; i < post_start - 1; i++) fprintf(outfile, " ");
+ fprintf(outfile, "^");
+ }
+
+for (i = 0; i < subject_length - pre_start - post_start + 4; i++)
+ fprintf(outfile, " ");
+
+fprintf(outfile, "%.*s", (cb->next_item_length == 0)? 1 : cb->next_item_length,
+ pbuffer + cb->pattern_position);
+
+fprintf(outfile, "\n");
+first_callout = 0;
+
+if (cb->callout_data != NULL)
+ {
+ int callout_data = *((int *)(cb->callout_data));
+ if (callout_data != 0)
+ {
+ fprintf(outfile, "Callout data = %d\n", callout_data);
+ return callout_data;
+ }
+ }
+
+return (cb->callout_number != callout_fail_id)? 0 :
+ (++callout_count >= callout_fail_count)? 1 : 0;
+}
+
+
+/*************************************************
+* Local malloc functions *
+*************************************************/
+
+/* Alternative malloc function, to test functionality and show the size of the
+compiled re. */
+
+static void *new_malloc(size_t size)
+{
+void *block = malloc(size);
+gotten_store = size;
+if (show_malloc)
+ fprintf(outfile, "malloc %3d %p\n", (int)size, block);
+return block;
+}
+
+static void new_free(void *block)
+{
+if (show_malloc)
+ fprintf(outfile, "free %p\n", block);
+free(block);
+}
+
+
+/* For recursion malloc/free, to test stacking calls */
+
+static void *stack_malloc(size_t size)
+{
+void *block = malloc(size);
+if (show_malloc)
+ fprintf(outfile, "stack_malloc %3d %p\n", (int)size, block);
+return block;
+}
+
+static void stack_free(void *block)
+{
+if (show_malloc)
+ fprintf(outfile, "stack_free %p\n", block);
+free(block);
+}
+
+
+/*************************************************
+* Call pcre_fullinfo() *
+*************************************************/
+
+/* Get one piece of information from the pcre_fullinfo() function */
+
+static void new_info(pcre *re, pcre_extra *study, int option, void *ptr)
+{
+int rc;
+if ((rc = pcre_fullinfo(re, study, option, ptr)) < 0)
+ fprintf(outfile, "Error %d from pcre_fullinfo(%d)\n", rc, option);
+}
+
+
+
+/*************************************************
+* Byte flipping function *
+*************************************************/
+
+static unsigned long int
+byteflip(unsigned long int value, int n)
+{
+if (n == 2) return ((value & 0x00ff) << 8) | ((value & 0xff00) >> 8);
+return ((value & 0x000000ff) << 24) |
+ ((value & 0x0000ff00) << 8) |
+ ((value & 0x00ff0000) >> 8) |
+ ((value & 0xff000000) >> 24);
+}
+
+
+
+
+/*************************************************
+* Check match or recursion limit *
+*************************************************/
+
+static int
+check_match_limit(pcre *re, pcre_extra *extra, uschar *bptr, int len,
+ int start_offset, int options, int *use_offsets, int use_size_offsets,
+ int flag, unsigned long int *limit, int errnumber, const char *msg)
+{
+int count;
+int min = 0;
+int mid = 64;
+int max = -1;
+
+extra->flags |= flag;
+
+for (;;)
+ {
+ *limit = mid;
+
+ count = pcre_exec(re, extra, (char *)bptr, len, start_offset, options,
+ use_offsets, use_size_offsets);
+
+ if (count == errnumber)
+ {
+ /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
+ min = mid;
+ mid = (mid == max - 1)? max : (max > 0)? (min + max)/2 : mid*2;
+ }
+
+ else if (count >= 0 || count == PCRE_ERROR_NOMATCH ||
+ count == PCRE_ERROR_PARTIAL)
+ {
+ if (mid == min + 1)
+ {
+ fprintf(outfile, "Minimum %s limit = %d\n", msg, mid);
+ break;
+ }
+ /* fprintf(outfile, "Testing %s limit = %d\n", msg, mid); */
+ max = mid;
+ mid = (min + mid)/2;
+ }
+ else break; /* Some other error */
+ }
+
+extra->flags &= ~flag;
+return count;
+}
+
+
+
+/*************************************************
+* Case-independent strncmp() function *
+*************************************************/
+
+/*
+Arguments:
+ s first string
+ t second string
+ n number of characters to compare
+
+Returns: < 0, = 0, or > 0, according to the comparison
+*/
+
+static int
+strncmpic(uschar *s, uschar *t, int n)
+{
+while (n--)
+ {
+ int c = tolower(*s++) - tolower(*t++);
+ if (c) return c;
+ }
+return 0;
+}
+
+
+
+/*************************************************
+* Check newline indicator *
+*************************************************/
+
+/* This is used both at compile and run-time to check for <xxx> escapes, where
+xxx is LF, CR, CRLF, ANYCRLF, or ANY. Print a message and return 0 if there is
+no match.
+
+Arguments:
+ p points after the leading '<'
+ f file for error message
+
+Returns: appropriate PCRE_NEWLINE_xxx flags, or 0
+*/
+
+static int
+check_newline(uschar *p, FILE *f)
+{
+if (strncmpic(p, (uschar *)"cr>", 3) == 0) return PCRE_NEWLINE_CR;
+if (strncmpic(p, (uschar *)"lf>", 3) == 0) return PCRE_NEWLINE_LF;
+if (strncmpic(p, (uschar *)"crlf>", 5) == 0) return PCRE_NEWLINE_CRLF;
+if (strncmpic(p, (uschar *)"anycrlf>", 8) == 0) return PCRE_NEWLINE_ANYCRLF;
+if (strncmpic(p, (uschar *)"any>", 4) == 0) return PCRE_NEWLINE_ANY;
+if (strncmpic(p, (uschar *)"bsr_anycrlf>", 12) == 0) return PCRE_BSR_ANYCRLF;
+if (strncmpic(p, (uschar *)"bsr_unicode>", 12) == 0) return PCRE_BSR_UNICODE;
+fprintf(f, "Unknown newline type at: <%s\n", p);
+return 0;
+}
+
+
+
+/*************************************************
+* Usage function *
+*************************************************/
+
+static void
+usage(void)
+{
+printf("Usage: pcretest [options] [<input file> [<output file>]]\n\n");
+printf("Input and output default to stdin and stdout.\n");
+#ifdef SUPPORT_LIBREADLINE
+printf("If input is a terminal, readline() is used to read from it.\n");
+#else
+printf("This version of pcretest is not linked with readline().\n");
+#endif
+printf("\nOptions:\n");
+printf(" -b show compiled code (bytecode)\n");
+printf(" -C show PCRE compile-time options and exit\n");
+printf(" -d debug: show compiled code and information (-b and -i)\n");
+#if !defined NODFA
+printf(" -dfa force DFA matching for all subjects\n");
+#endif
+printf(" -help show usage information\n");
+printf(" -i show information about compiled patterns\n"
+ " -m output memory used information\n"
+ " -o <n> set size of offsets vector to <n>\n");
+#if !defined NOPOSIX
+printf(" -p use POSIX interface\n");
+#endif
+printf(" -q quiet: do not output PCRE version number at start\n");
+printf(" -S <n> set stack size to <n> megabytes\n");
+printf(" -s output store (memory) used information\n"
+ " -t time compilation and execution\n");
+printf(" -t <n> time compilation and execution, repeating <n> times\n");
+printf(" -tm time execution (matching) only\n");
+printf(" -tm <n> time execution (matching) only, repeating <n> times\n");
+}
+
+
+
+/*************************************************
+* Main Program *
+*************************************************/
+
+/* Read lines from named file or stdin and write to named file or stdout; lines
+consist of a regular expression, in delimiters and optionally followed by
+options, followed by a set of test data, terminated by an empty line. */
+
+int main(int argc, char **argv)
+{
+FILE *infile = stdin;
+int options = 0;
+int study_options = 0;
+int op = 1;
+int timeit = 0;
+int timeitm = 0;
+int showinfo = 0;
+int showstore = 0;
+int quiet = 0;
+int size_offsets = 45;
+int size_offsets_max;
+int *offsets = NULL;
+#if !defined NOPOSIX
+int posix = 0;
+#endif
+int debug = 0;
+int done = 0;
+int all_use_dfa = 0;
+int yield = 0;
+int stack_size;
+
+/* These vectors store, end-to-end, a list of captured substring names. Assume
+that 1024 is plenty long enough for the few names we'll be testing. */
+
+uschar copynames[1024];
+uschar getnames[1024];
+
+uschar *copynamesptr;
+uschar *getnamesptr;
+
+/* Get buffers from malloc() so that Electric Fence will check their misuse
+when I am debugging. They grow automatically when very long lines are read. */
+
+buffer = (unsigned char *)malloc(buffer_size);
+dbuffer = (unsigned char *)malloc(buffer_size);
+pbuffer = (unsigned char *)malloc(buffer_size);
+
+/* The outfile variable is static so that new_malloc can use it. */
+
+outfile = stdout;
+
+/* The following _setmode() stuff is some Windows magic that tells its runtime
+library to translate CRLF into a single LF character. At least, that's what
+I've been told: never having used Windows I take this all on trust. Originally
+it set 0x8000, but then I was advised that _O_BINARY was better. */
+
+#if defined(_WIN32) || defined(WIN32)
+_setmode( _fileno( stdout ), _O_BINARY );
+#endif
+
+/* Scan options */
+
+while (argc > 1 && argv[op][0] == '-')
+ {
+ unsigned char *endptr;
+
+ if (strcmp(argv[op], "-s") == 0 || strcmp(argv[op], "-m") == 0)
+ showstore = 1;
+ else if (strcmp(argv[op], "-q") == 0) quiet = 1;
+ else if (strcmp(argv[op], "-b") == 0) debug = 1;
+ else if (strcmp(argv[op], "-i") == 0) showinfo = 1;
+ else if (strcmp(argv[op], "-d") == 0) showinfo = debug = 1;
+#if !defined NODFA
+ else if (strcmp(argv[op], "-dfa") == 0) all_use_dfa = 1;
+#endif
+ else if (strcmp(argv[op], "-o") == 0 && argc > 2 &&
+ ((size_offsets = get_value((unsigned char *)argv[op+1], &endptr)),
+ *endptr == 0))
+ {
+ op++;
+ argc--;
+ }
+ else if (strcmp(argv[op], "-t") == 0 || strcmp(argv[op], "-tm") == 0)
+ {
+ int both = argv[op][2] == 0;
+ int temp;
+ if (argc > 2 && (temp = get_value((unsigned char *)argv[op+1], &endptr),
+ *endptr == 0))
+ {
+ timeitm = temp;
+ op++;
+ argc--;
+ }
+ else timeitm = LOOPREPEAT;
+ if (both) timeit = timeitm;
+ }
+ else if (strcmp(argv[op], "-S") == 0 && argc > 2 &&
+ ((stack_size = get_value((unsigned char *)argv[op+1], &endptr)),
+ *endptr == 0))
+ {
+#if defined(_WIN32) || defined(WIN32)
+ printf("PCRE: -S not supported on this OS\n");
+ exit(1);
+#else
+ int rc;
+ struct rlimit rlim;
+ getrlimit(RLIMIT_STACK, &rlim);
+ rlim.rlim_cur = stack_size * 1024 * 1024;
+ rc = setrlimit(RLIMIT_STACK, &rlim);
+ if (rc != 0)
+ {
+ printf("PCRE: setrlimit() failed with error %d\n", rc);
+ exit(1);
+ }
+ op++;
+ argc--;
+#endif
+ }
+#if !defined NOPOSIX
+ else if (strcmp(argv[op], "-p") == 0) posix = 1;
+#endif
+ else if (strcmp(argv[op], "-C") == 0)
+ {
+ int rc;
+ printf("PCRE version %s\n", pcre_version());
+ printf("Compiled with\n");
+ (void)pcre_config(PCRE_CONFIG_UTF8, &rc);
+ printf(" %sUTF-8 support\n", rc? "" : "No ");
+ (void)pcre_config(PCRE_CONFIG_UNICODE_PROPERTIES, &rc);
+ printf(" %sUnicode properties support\n", rc? "" : "No ");
+ (void)pcre_config(PCRE_CONFIG_NEWLINE, &rc);
+ printf(" Newline sequence is %s\n", (rc == '\r')? "CR" :
+ (rc == '\n')? "LF" : (rc == ('\r'<<8 | '\n'))? "CRLF" :
+ (rc == -2)? "ANYCRLF" :
+ (rc == -1)? "ANY" : "???");
+ (void)pcre_config(PCRE_CONFIG_BSR, &rc);
+ printf(" \\R matches %s\n", rc? "CR, LF, or CRLF only" :
+ "all Unicode newlines");
+ (void)pcre_config(PCRE_CONFIG_LINK_SIZE, &rc);
+ printf(" Internal link size = %d\n", rc);
+ (void)pcre_config(PCRE_CONFIG_POSIX_MALLOC_THRESHOLD, &rc);
+ printf(" POSIX malloc threshold = %d\n", rc);
+ (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT, &rc);
+ printf(" Default match limit = %d\n", rc);
+ (void)pcre_config(PCRE_CONFIG_MATCH_LIMIT_RECURSION, &rc);
+ printf(" Default recursion depth limit = %d\n", rc);
+ (void)pcre_config(PCRE_CONFIG_STACKRECURSE, &rc);
+ printf(" Match recursion uses %s\n", rc? "stack" : "heap");
+ goto EXIT;
+ }
+ else if (strcmp(argv[op], "-help") == 0 ||
+ strcmp(argv[op], "--help") == 0)
+ {
+ usage();
+ goto EXIT;
+ }
+ else
+ {
+ printf("** Unknown or malformed option %s\n", argv[op]);
+ usage();
+ yield = 1;
+ goto EXIT;
+ }
+ op++;
+ argc--;
+ }
+
+/* Get the store for the offsets vector, and remember what it was */
+
+size_offsets_max = size_offsets;
+offsets = (int *)malloc(size_offsets_max * sizeof(int));
+if (offsets == NULL)
+ {
+ printf("** Failed to get %d bytes of memory for offsets vector\n",
+ (int)(size_offsets_max * sizeof(int)));
+ yield = 1;
+ goto EXIT;
+ }
+
+/* Sort out the input and output files */
+
+if (argc > 1)
+ {
+ infile = fopen(argv[op], INPUT_MODE);
+ if (infile == NULL)
+ {
+ printf("** Failed to open %s\n", argv[op]);
+ yield = 1;
+ goto EXIT;
+ }
+ }
+
+if (argc > 2)
+ {
+ outfile = fopen(argv[op+1], OUTPUT_MODE);
+ if (outfile == NULL)
+ {
+ printf("** Failed to open %s\n", argv[op+1]);
+ yield = 1;
+ goto EXIT;
+ }
+ }
+
+/* Set alternative malloc function */
+
+pcre_malloc = new_malloc;
+pcre_free = new_free;
+pcre_stack_malloc = stack_malloc;
+pcre_stack_free = stack_free;
+
+/* Heading line unless quiet, then prompt for first regex if stdin */
+
+if (!quiet) fprintf(outfile, "PCRE version %s\n\n", pcre_version());
+
+/* Main loop */
+
+while (!done)
+ {
+ pcre *re = NULL;
+ pcre_extra *extra = NULL;
+
+#if !defined NOPOSIX /* There are still compilers that require no indent */
+ regex_t preg;
+ int do_posix = 0;
+#endif
+
+ const char *error;
+ unsigned char *p, *pp, *ppp;
+ unsigned char *to_file = NULL;
+ const unsigned char *tables = NULL;
+ unsigned long int true_size, true_study_size = 0;
+ size_t size, regex_gotten_store;
+ int do_study = 0;
+ int do_debug = debug;
+ int do_G = 0;
+ int do_g = 0;
+ int do_showinfo = showinfo;
+ int do_showrest = 0;
+ int do_flip = 0;
+ int erroroffset, len, delimiter, poffset;
+
+ use_utf8 = 0;
+ debug_lengths = 1;
+
+ if (extend_inputline(infile, buffer, " re> ") == NULL) break;
+ if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
+ fflush(outfile);
+
+ p = buffer;
+ while (isspace(*p)) p++;
+ if (*p == 0) continue;
+
+ /* See if the pattern is to be loaded pre-compiled from a file. */
+
+ if (*p == '<' && strchr((char *)(p+1), '<') == NULL)
+ {
+ unsigned long int magic, get_options;
+ uschar sbuf[8];
+ FILE *f;
+
+ p++;
+ pp = p + (int)strlen((char *)p);
+ while (isspace(pp[-1])) pp--;
+ *pp = 0;
+
+ f = fopen((char *)p, "rb");
+ if (f == NULL)
+ {
+ fprintf(outfile, "Failed to open %s: %s\n", p, strerror(errno));
+ continue;
+ }
+
+ if (fread(sbuf, 1, 8, f) != 8) goto FAIL_READ;
+
+ true_size =
+ (sbuf[0] << 24) | (sbuf[1] << 16) | (sbuf[2] << 8) | sbuf[3];
+ true_study_size =
+ (sbuf[4] << 24) | (sbuf[5] << 16) | (sbuf[6] << 8) | sbuf[7];
+
+ re = (real_pcre *)new_malloc(true_size);
+ regex_gotten_store = gotten_store;
+
+ if (fread(re, 1, true_size, f) != true_size) goto FAIL_READ;
+
+ magic = ((real_pcre *)re)->magic_number;
+ if (magic != MAGIC_NUMBER)
+ {
+ if (byteflip(magic, sizeof(magic)) == MAGIC_NUMBER)
+ {
+ do_flip = 1;
+ }
+ else
+ {
+ fprintf(outfile, "Data in %s is not a compiled PCRE regex\n", p);
+ fclose(f);
+ continue;
+ }
+ }
+
+ fprintf(outfile, "Compiled regex%s loaded from %s\n",
+ do_flip? " (byte-inverted)" : "", p);
+
+ /* Need to know if UTF-8 for printing data strings */
+
+ new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
+ use_utf8 = (get_options & PCRE_UTF8) != 0;
+
+ /* Now see if there is any following study data */
+
+ if (true_study_size != 0)
+ {
+ pcre_study_data *psd;
+
+ extra = (pcre_extra *)new_malloc(sizeof(pcre_extra) + true_study_size);
+ extra->flags = PCRE_EXTRA_STUDY_DATA;
+
+ psd = (pcre_study_data *)(((char *)extra) + sizeof(pcre_extra));
+ extra->study_data = psd;
+
+ if (fread(psd, 1, true_study_size, f) != true_study_size)
+ {
+ FAIL_READ:
+ fprintf(outfile, "Failed to read data from %s\n", p);
+ if (extra != NULL) new_free(extra);
+ if (re != NULL) new_free(re);
+ fclose(f);
+ continue;
+ }
+ fprintf(outfile, "Study data loaded from %s\n", p);
+ do_study = 1; /* To get the data output if requested */
+ }
+ else fprintf(outfile, "No study data\n");
+
+ fclose(f);
+ goto SHOW_INFO;
+ }
+
+ /* In-line pattern (the usual case). Get the delimiter and seek the end of
+ the pattern; if is isn't complete, read more. */
+
+ delimiter = *p++;
+
+ if (isalnum(delimiter) || delimiter == '\\')
+ {
+ fprintf(outfile, "** Delimiter must not be alphanumeric or \\\n");
+ goto SKIP_DATA;
+ }
+
+ pp = p;
+ poffset = p - buffer;
+
+ for(;;)
+ {
+ while (*pp != 0)
+ {
+ if (*pp == '\\' && pp[1] != 0) pp++;
+ else if (*pp == delimiter) break;
+ pp++;
+ }
+ if (*pp != 0) break;
+ if ((pp = extend_inputline(infile, pp, " > ")) == NULL)
+ {
+ fprintf(outfile, "** Unexpected EOF\n");
+ done = 1;
+ goto CONTINUE;
+ }
+ if (infile != stdin) fprintf(outfile, "%s", (char *)pp);
+ }
+
+ /* The buffer may have moved while being extended; reset the start of data
+ pointer to the correct relative point in the buffer. */
+
+ p = buffer + poffset;
+
+ /* If the first character after the delimiter is backslash, make
+ the pattern end with backslash. This is purely to provide a way
+ of testing for the error message when a pattern ends with backslash. */
+
+ if (pp[1] == '\\') *pp++ = '\\';
+
+ /* Terminate the pattern at the delimiter, and save a copy of the pattern
+ for callouts. */
+
+ *pp++ = 0;
+ strcpy((char *)pbuffer, (char *)p);
+
+ /* Look for options after final delimiter */
+
+ options = 0;
+ study_options = 0;
+ log_store = showstore; /* default from command line */
+
+ while (*pp != 0)
+ {
+ switch (*pp++)
+ {
+ case 'f': options |= PCRE_FIRSTLINE; break;
+ case 'g': do_g = 1; break;
+ case 'i': options |= PCRE_CASELESS; break;
+ case 'm': options |= PCRE_MULTILINE; break;
+ case 's': options |= PCRE_DOTALL; break;
+ case 'x': options |= PCRE_EXTENDED; break;
+
+ case '+': do_showrest = 1; break;
+ case 'A': options |= PCRE_ANCHORED; break;
+ case 'B': do_debug = 1; break;
+ case 'C': options |= PCRE_AUTO_CALLOUT; break;
+ case 'D': do_debug = do_showinfo = 1; break;
+ case 'E': options |= PCRE_DOLLAR_ENDONLY; break;
+ case 'F': do_flip = 1; break;
+ case 'G': do_G = 1; break;
+ case 'I': do_showinfo = 1; break;
+ case 'J': options |= PCRE_DUPNAMES; break;
+ case 'M': log_store = 1; break;
+ case 'N': options |= PCRE_NO_AUTO_CAPTURE; break;
+
+#if !defined NOPOSIX
+ case 'P': do_posix = 1; break;
+#endif
+
+ case 'S': do_study = 1; break;
+ case 'U': options |= PCRE_UNGREEDY; break;
+ case 'X': options |= PCRE_EXTRA; break;
+ case 'Z': debug_lengths = 0; break;
+ case '8': options |= PCRE_UTF8; use_utf8 = 1; break;
+ case '?': options |= PCRE_NO_UTF8_CHECK; break;
+
+ case 'L':
+ ppp = pp;
+ /* The '\r' test here is so that it works on Windows. */
+ /* The '0' test is just in case this is an unterminated line. */
+ while (*ppp != 0 && *ppp != '\n' && *ppp != '\r' && *ppp != ' ') ppp++;
+ *ppp = 0;
+ if (setlocale(LC_CTYPE, (const char *)pp) == NULL)
+ {
+ fprintf(outfile, "** Failed to set locale \"%s\"\n", pp);
+ goto SKIP_DATA;
+ }
+ locale_set = 1;
+ tables = pcre_maketables();
+ pp = ppp;
+ break;
+
+ case '>':
+ to_file = pp;
+ while (*pp != 0) pp++;
+ while (isspace(pp[-1])) pp--;
+ *pp = 0;
+ break;
+
+ case '<':
+ {
+ if (strncmp((char *)pp, "JS>", 3) == 0)
+ {
+ options |= PCRE_JAVASCRIPT_COMPAT;
+ pp += 3;
+ }
+ else
+ {
+ int x = check_newline(pp, outfile);
+ if (x == 0) goto SKIP_DATA;
+ options |= x;
+ while (*pp++ != '>');
+ }
+ }
+ break;
+
+ case '\r': /* So that it works in Windows */
+ case '\n':
+ case ' ':
+ break;
+
+ default:
+ fprintf(outfile, "** Unknown option '%c'\n", pp[-1]);
+ goto SKIP_DATA;
+ }
+ }
+
+ /* Handle compiling via the POSIX interface, which doesn't support the
+ timing, showing, or debugging options, nor the ability to pass over
+ local character tables. */
+
+#if !defined NOPOSIX
+ if (posix || do_posix)
+ {
+ int rc;
+ int cflags = 0;
+
+ if ((options & PCRE_CASELESS) != 0) cflags |= REG_ICASE;
+ if ((options & PCRE_MULTILINE) != 0) cflags |= REG_NEWLINE;
+ if ((options & PCRE_DOTALL) != 0) cflags |= REG_DOTALL;
+ if ((options & PCRE_NO_AUTO_CAPTURE) != 0) cflags |= REG_NOSUB;
+ if ((options & PCRE_UTF8) != 0) cflags |= REG_UTF8;
+
+ rc = regcomp(&preg, (char *)p, cflags);
+
+ /* Compilation failed; go back for another re, skipping to blank line
+ if non-interactive. */
+
+ if (rc != 0)
+ {
+ (void)regerror(rc, &preg, (char *)buffer, buffer_size);
+ fprintf(outfile, "Failed: POSIX code %d: %s\n", rc, buffer);
+ goto SKIP_DATA;
+ }
+ }
+
+ /* Handle compiling via the native interface */
+
+ else
+#endif /* !defined NOPOSIX */
+
+ {
+ if (timeit > 0)
+ {
+ register int i;
+ clock_t time_taken;
+ clock_t start_time = clock();
+ for (i = 0; i < timeit; i++)
+ {
+ re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
+ if (re != NULL) free(re);
+ }
+ time_taken = clock() - start_time;
+ fprintf(outfile, "Compile time %.4f milliseconds\n",
+ (((double)time_taken * 1000.0) / (double)timeit) /
+ (double)CLOCKS_PER_SEC);
+ }
+
+ re = pcre_compile((char *)p, options, &error, &erroroffset, tables);
+
+ /* Compilation failed; go back for another re, skipping to blank line
+ if non-interactive. */
+
+ if (re == NULL)
+ {
+ fprintf(outfile, "Failed: %s at offset %d\n", error, erroroffset);
+ SKIP_DATA:
+ if (infile != stdin)
+ {
+ for (;;)
+ {
+ if (extend_inputline(infile, buffer, NULL) == NULL)
+ {
+ done = 1;
+ goto CONTINUE;
+ }
+ len = (int)strlen((char *)buffer);
+ while (len > 0 && isspace(buffer[len-1])) len--;
+ if (len == 0) break;
+ }
+ fprintf(outfile, "\n");
+ }
+ goto CONTINUE;
+ }
+
+ /* Compilation succeeded; print data if required. There are now two
+ info-returning functions. The old one has a limited interface and
+ returns only limited data. Check that it agrees with the newer one. */
+
+ if (log_store)
+ fprintf(outfile, "Memory allocation (code space): %d\n",
+ (int)(gotten_store -
+ sizeof(real_pcre) -
+ ((real_pcre *)re)->name_count * ((real_pcre *)re)->name_entry_size));
+
+ /* Extract the size for possible writing before possibly flipping it,
+ and remember the store that was got. */
+
+ true_size = ((real_pcre *)re)->size;
+ regex_gotten_store = gotten_store;
+
+ /* If /S was present, study the regexp to generate additional info to
+ help with the matching. */
+
+ if (do_study)
+ {
+ if (timeit > 0)
+ {
+ register int i;
+ clock_t time_taken;
+ clock_t start_time = clock();
+ for (i = 0; i < timeit; i++)
+ extra = pcre_study(re, study_options, &error);
+ time_taken = clock() - start_time;
+ if (extra != NULL) free(extra);
+ fprintf(outfile, " Study time %.4f milliseconds\n",
+ (((double)time_taken * 1000.0) / (double)timeit) /
+ (double)CLOCKS_PER_SEC);
+ }
+ extra = pcre_study(re, study_options, &error);
+ if (error != NULL)
+ fprintf(outfile, "Failed to study: %s\n", error);
+ else if (extra != NULL)
+ true_study_size = ((pcre_study_data *)(extra->study_data))->size;
+ }
+
+ /* If the 'F' option was present, we flip the bytes of all the integer
+ fields in the regex data block and the study block. This is to make it
+ possible to test PCRE's handling of byte-flipped patterns, e.g. those
+ compiled on a different architecture. */
+
+ if (do_flip)
+ {
+ real_pcre *rre = (real_pcre *)re;
+ rre->magic_number =
+ byteflip(rre->magic_number, sizeof(rre->magic_number));
+ rre->size = byteflip(rre->size, sizeof(rre->size));
+ rre->options = byteflip(rre->options, sizeof(rre->options));
+ rre->flags = (pcre_uint16)byteflip(rre->flags, sizeof(rre->flags));
+ rre->top_bracket =
+ (pcre_uint16)byteflip(rre->top_bracket, sizeof(rre->top_bracket));
+ rre->top_backref =
+ (pcre_uint16)byteflip(rre->top_backref, sizeof(rre->top_backref));
+ rre->first_byte =
+ (pcre_uint16)byteflip(rre->first_byte, sizeof(rre->first_byte));
+ rre->req_byte =
+ (pcre_uint16)byteflip(rre->req_byte, sizeof(rre->req_byte));
+ rre->name_table_offset = (pcre_uint16)byteflip(rre->name_table_offset,
+ sizeof(rre->name_table_offset));
+ rre->name_entry_size = (pcre_uint16)byteflip(rre->name_entry_size,
+ sizeof(rre->name_entry_size));
+ rre->name_count = (pcre_uint16)byteflip(rre->name_count,
+ sizeof(rre->name_count));
+
+ if (extra != NULL)
+ {
+ pcre_study_data *rsd = (pcre_study_data *)(extra->study_data);
+ rsd->size = byteflip(rsd->size, sizeof(rsd->size));
+ rsd->options = byteflip(rsd->options, sizeof(rsd->options));
+ }
+ }
+
+ /* Extract information from the compiled data if required */
+
+ SHOW_INFO:
+
+ if (do_debug)
+ {
+ fprintf(outfile, "------------------------------------------------------------------\n");
+ pcre_printint(re, outfile, debug_lengths);
+ }
+
+ if (do_showinfo)
+ {
+ unsigned long int get_options, all_options;
+#if !defined NOINFOCHECK
+ int old_first_char, old_options, old_count;
+#endif
+ int count, backrefmax, first_char, need_char, okpartial, jchanged,
+ hascrorlf;
+ int nameentrysize, namecount;
+ const uschar *nametable;
+
+ new_info(re, NULL, PCRE_INFO_OPTIONS, &get_options);
+ new_info(re, NULL, PCRE_INFO_SIZE, &size);
+ new_info(re, NULL, PCRE_INFO_CAPTURECOUNT, &count);
+ new_info(re, NULL, PCRE_INFO_BACKREFMAX, &backrefmax);
+ new_info(re, NULL, PCRE_INFO_FIRSTBYTE, &first_char);
+ new_info(re, NULL, PCRE_INFO_LASTLITERAL, &need_char);
+ new_info(re, NULL, PCRE_INFO_NAMEENTRYSIZE, &nameentrysize);
+ new_info(re, NULL, PCRE_INFO_NAMECOUNT, &namecount);
+ new_info(re, NULL, PCRE_INFO_NAMETABLE, (void *)&nametable);
+ new_info(re, NULL, PCRE_INFO_OKPARTIAL, &okpartial);
+ new_info(re, NULL, PCRE_INFO_JCHANGED, &jchanged);
+ new_info(re, NULL, PCRE_INFO_HASCRORLF, &hascrorlf);
+
+#if !defined NOINFOCHECK
+ old_count = pcre_info(re, &old_options, &old_first_char);
+ if (count < 0) fprintf(outfile,
+ "Error %d from pcre_info()\n", count);
+ else
+ {
+ if (old_count != count) fprintf(outfile,
+ "Count disagreement: pcre_fullinfo=%d pcre_info=%d\n", count,
+ old_count);
+
+ if (old_first_char != first_char) fprintf(outfile,
+ "First char disagreement: pcre_fullinfo=%d pcre_info=%d\n",
+ first_char, old_first_char);
+
+ if (old_options != (int)get_options) fprintf(outfile,
+ "Options disagreement: pcre_fullinfo=%ld pcre_info=%d\n",
+ get_options, old_options);
+ }
+#endif
+
+ if (size != regex_gotten_store) fprintf(outfile,
+ "Size disagreement: pcre_fullinfo=%d call to malloc for %d\n",
+ (int)size, (int)regex_gotten_store);
+
+ fprintf(outfile, "Capturing subpattern count = %d\n", count);
+ if (backrefmax > 0)
+ fprintf(outfile, "Max back reference = %d\n", backrefmax);
+
+ if (namecount > 0)
+ {
+ fprintf(outfile, "Named capturing subpatterns:\n");
+ while (namecount-- > 0)
+ {
+ fprintf(outfile, " %s %*s%3d\n", nametable + 2,
+ nameentrysize - 3 - (int)strlen((char *)nametable + 2), "",
+ GET2(nametable, 0));
+ nametable += nameentrysize;
+ }
+ }
+
+ if (!okpartial) fprintf(outfile, "Partial matching not supported\n");
+ if (hascrorlf) fprintf(outfile, "Contains explicit CR or LF match\n");
+
+ all_options = ((real_pcre *)re)->options;
+ if (do_flip) all_options = byteflip(all_options, sizeof(all_options));
+
+ if (get_options == 0) fprintf(outfile, "No options\n");
+ else fprintf(outfile, "Options:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
+ ((get_options & PCRE_ANCHORED) != 0)? " anchored" : "",
+ ((get_options & PCRE_CASELESS) != 0)? " caseless" : "",
+ ((get_options & PCRE_EXTENDED) != 0)? " extended" : "",
+ ((get_options & PCRE_MULTILINE) != 0)? " multiline" : "",
+ ((get_options & PCRE_FIRSTLINE) != 0)? " firstline" : "",
+ ((get_options & PCRE_DOTALL) != 0)? " dotall" : "",
+ ((get_options & PCRE_BSR_ANYCRLF) != 0)? " bsr_anycrlf" : "",
+ ((get_options & PCRE_BSR_UNICODE) != 0)? " bsr_unicode" : "",
+ ((get_options & PCRE_DOLLAR_ENDONLY) != 0)? " dollar_endonly" : "",
+ ((get_options & PCRE_EXTRA) != 0)? " extra" : "",
+ ((get_options & PCRE_UNGREEDY) != 0)? " ungreedy" : "",
+ ((get_options & PCRE_NO_AUTO_CAPTURE) != 0)? " no_auto_capture" : "",
+ ((get_options & PCRE_UTF8) != 0)? " utf8" : "",
+ ((get_options & PCRE_NO_UTF8_CHECK) != 0)? " no_utf8_check" : "",
+ ((get_options & PCRE_DUPNAMES) != 0)? " dupnames" : "");
+
+ if (jchanged) fprintf(outfile, "Duplicate name status changes\n");
+
+ switch (get_options & PCRE_NEWLINE_BITS)
+ {
+ case PCRE_NEWLINE_CR:
+ fprintf(outfile, "Forced newline sequence: CR\n");
+ break;
+
+ case PCRE_NEWLINE_LF:
+ fprintf(outfile, "Forced newline sequence: LF\n");
+ break;
+
+ case PCRE_NEWLINE_CRLF:
+ fprintf(outfile, "Forced newline sequence: CRLF\n");
+ break;
+
+ case PCRE_NEWLINE_ANYCRLF:
+ fprintf(outfile, "Forced newline sequence: ANYCRLF\n");
+ break;
+
+ case PCRE_NEWLINE_ANY:
+ fprintf(outfile, "Forced newline sequence: ANY\n");
+ break;
+
+ default:
+ break;
+ }
+
+ if (first_char == -1)
+ {
+ fprintf(outfile, "First char at start or follows newline\n");
+ }
+ else if (first_char < 0)
+ {
+ fprintf(outfile, "No first char\n");
+ }
+ else
+ {
+ int ch = first_char & 255;
+ const char *caseless = ((first_char & REQ_CASELESS) == 0)?
+ "" : " (caseless)";
+ if (PRINTHEX(ch))
+ fprintf(outfile, "First char = \'%c\'%s\n", ch, caseless);
+ else
+ fprintf(outfile, "First char = %d%s\n", ch, caseless);
+ }
+
+ if (need_char < 0)
+ {
+ fprintf(outfile, "No need char\n");
+ }
+ else
+ {
+ int ch = need_char & 255;
+ const char *caseless = ((need_char & REQ_CASELESS) == 0)?
+ "" : " (caseless)";
+ if (PRINTHEX(ch))
+ fprintf(outfile, "Need char = \'%c\'%s\n", ch, caseless);
+ else
+ fprintf(outfile, "Need char = %d%s\n", ch, caseless);
+ }
+
+ /* Don't output study size; at present it is in any case a fixed
+ value, but it varies, depending on the computer architecture, and
+ so messes up the test suite. (And with the /F option, it might be
+ flipped.) */
+
+ if (do_study)
+ {
+ if (extra == NULL)
+ fprintf(outfile, "Study returned NULL\n");
+ else
+ {
+ uschar *start_bits = NULL;
+ new_info(re, extra, PCRE_INFO_FIRSTTABLE, &start_bits);
+
+ if (start_bits == NULL)
+ fprintf(outfile, "No starting byte set\n");
+ else
+ {
+ int i;
+ int c = 24;
+ fprintf(outfile, "Starting byte set: ");
+ for (i = 0; i < 256; i++)
+ {
+ if ((start_bits[i/8] & (1<<(i&7))) != 0)
+ {
+ if (c > 75)
+ {
+ fprintf(outfile, "\n ");
+ c = 2;
+ }
+ if (PRINTHEX(i) && i != ' ')
+ {
+ fprintf(outfile, "%c ", i);
+ c += 2;
+ }
+ else
+ {
+ fprintf(outfile, "\\x%02x ", i);
+ c += 5;
+ }
+ }
+ }
+ fprintf(outfile, "\n");
+ }
+ }
+ }
+ }
+
+ /* If the '>' option was present, we write out the regex to a file, and
+ that is all. The first 8 bytes of the file are the regex length and then
+ the study length, in big-endian order. */
+
+ if (to_file != NULL)
+ {
+ FILE *f = fopen((char *)to_file, "wb");
+ if (f == NULL)
+ {
+ fprintf(outfile, "Unable to open %s: %s\n", to_file, strerror(errno));
+ }
+ else
+ {
+ uschar sbuf[8];
+ sbuf[0] = (uschar)((true_size >> 24) & 255);
+ sbuf[1] = (uschar)((true_size >> 16) & 255);
+ sbuf[2] = (uschar)((true_size >> 8) & 255);
+ sbuf[3] = (uschar)((true_size) & 255);
+
+ sbuf[4] = (uschar)((true_study_size >> 24) & 255);
+ sbuf[5] = (uschar)((true_study_size >> 16) & 255);
+ sbuf[6] = (uschar)((true_study_size >> 8) & 255);
+ sbuf[7] = (uschar)((true_study_size) & 255);
+
+ if (fwrite(sbuf, 1, 8, f) < 8 ||
+ fwrite(re, 1, true_size, f) < true_size)
+ {
+ fprintf(outfile, "Write error on %s: %s\n", to_file, strerror(errno));
+ }
+ else
+ {
+ fprintf(outfile, "Compiled regex written to %s\n", to_file);
+ if (extra != NULL)
+ {
+ if (fwrite(extra->study_data, 1, true_study_size, f) <
+ true_study_size)
+ {
+ fprintf(outfile, "Write error on %s: %s\n", to_file,
+ strerror(errno));
+ }
+ else fprintf(outfile, "Study data written to %s\n", to_file);
+
+ }
+ }
+ fclose(f);
+ }
+
+ new_free(re);
+ if (extra != NULL) new_free(extra);
+ if (tables != NULL) new_free((void *)tables);
+ continue; /* With next regex */
+ }
+ } /* End of non-POSIX compile */
+
+ /* Read data lines and test them */
+
+ for (;;)
+ {
+ uschar *q;
+ uschar *bptr;
+ int *use_offsets = offsets;
+ int use_size_offsets = size_offsets;
+ int callout_data = 0;
+ int callout_data_set = 0;
+ int count, c;
+ int copystrings = 0;
+ int find_match_limit = 0;
+ int getstrings = 0;
+ int getlist = 0;
+ int gmatched = 0;
+ int start_offset = 0;
+ int g_notempty = 0;
+ int use_dfa = 0;
+
+ options = 0;
+
+ *copynames = 0;
+ *getnames = 0;
+
+ copynamesptr = copynames;
+ getnamesptr = getnames;
+
+ pcre_callout = callout;
+ first_callout = 1;
+ callout_extra = 0;
+ callout_count = 0;
+ callout_fail_count = 999999;
+ callout_fail_id = -1;
+ show_malloc = 0;
+
+ if (extra != NULL) extra->flags &=
+ ~(PCRE_EXTRA_MATCH_LIMIT|PCRE_EXTRA_MATCH_LIMIT_RECURSION);
+
+ len = 0;
+ for (;;)
+ {
+ if (extend_inputline(infile, buffer + len, "data> ") == NULL)
+ {
+ if (len > 0) break;
+ done = 1;
+ goto CONTINUE;
+ }
+ if (infile != stdin) fprintf(outfile, "%s", (char *)buffer);
+ len = (int)strlen((char *)buffer);
+ if (buffer[len-1] == '\n') break;
+ }
+
+ while (len > 0 && isspace(buffer[len-1])) len--;
+ buffer[len] = 0;
+ if (len == 0) break;
+
+ p = buffer;
+ while (isspace(*p)) p++;
+
+ bptr = q = dbuffer;
+ while ((c = *p++) != 0)
+ {
+ int i = 0;
+ int n = 0;
+
+ if (c == '\\') switch ((c = *p++))
+ {
+ case 'a': c = 7; break;
+ case 'b': c = '\b'; break;
+ case 'e': c = 27; break;
+ case 'f': c = '\f'; break;
+ case 'n': c = '\n'; break;
+ case 'r': c = '\r'; break;
+ case 't': c = '\t'; break;
+ case 'v': c = '\v'; break;
+
+ case '0': case '1': case '2': case '3':
+ case '4': case '5': case '6': case '7':
+ c -= '0';
+ while (i++ < 2 && isdigit(*p) && *p != '8' && *p != '9')
+ c = c * 8 + *p++ - '0';
+
+#if !defined NOUTF8
+ if (use_utf8 && c > 255)
+ {
+ unsigned char buff8[8];
+ int ii, utn;
+ utn = ord2utf8(c, buff8);
+ for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];
+ c = buff8[ii]; /* Last byte */
+ }
+#endif
+ break;
+
+ case 'x':
+
+ /* Handle \x{..} specially - new Perl thing for utf8 */
+
+#if !defined NOUTF8
+ if (*p == '{')
+ {
+ unsigned char *pt = p;
+ c = 0;
+ while (isxdigit(*(++pt)))
+ c = c * 16 + tolower(*pt) - ((isdigit(*pt))? '0' : 'W');
+ if (*pt == '}')
+ {
+ unsigned char buff8[8];
+ int ii, utn;
+ if (use_utf8)
+ {
+ utn = ord2utf8(c, buff8);
+ for (ii = 0; ii < utn - 1; ii++) *q++ = buff8[ii];
+ c = buff8[ii]; /* Last byte */
+ }
+ else
+ {
+ if (c > 255)
+ fprintf(outfile, "** Character \\x{%x} is greater than 255 and "
+ "UTF-8 mode is not enabled.\n"
+ "** Truncation will probably give the wrong result.\n", c);
+ }
+ p = pt + 1;
+ break;
+ }
+ /* Not correct form; fall through */
+ }
+#endif
+
+ /* Ordinary \x */
+
+ c = 0;
+ while (i++ < 2 && isxdigit(*p))
+ {
+ c = c * 16 + tolower(*p) - ((isdigit(*p))? '0' : 'W');
+ p++;
+ }
+ break;
+
+ case 0: /* \ followed by EOF allows for an empty line */
+ p--;
+ continue;
+
+ case '>':
+ while(isdigit(*p)) start_offset = start_offset * 10 + *p++ - '0';
+ continue;
+
+ case 'A': /* Option setting */
+ options |= PCRE_ANCHORED;
+ continue;
+
+ case 'B':
+ options |= PCRE_NOTBOL;
+ continue;
+
+ case 'C':
+ if (isdigit(*p)) /* Set copy string */
+ {
+ while(isdigit(*p)) n = n * 10 + *p++ - '0';
+ copystrings |= 1 << n;
+ }
+ else if (isalnum(*p))
+ {
+ uschar *npp = copynamesptr;
+ while (isalnum(*p)) *npp++ = *p++;
+ *npp++ = 0;
+ *npp = 0;
+ n = pcre_get_stringnumber(re, (char *)copynamesptr);
+ if (n < 0)
+ fprintf(outfile, "no parentheses with name \"%s\"\n", copynamesptr);
+ copynamesptr = npp;
+ }
+ else if (*p == '+')
+ {
+ callout_extra = 1;
+ p++;
+ }
+ else if (*p == '-')
+ {
+ pcre_callout = NULL;
+ p++;
+ }
+ else if (*p == '!')
+ {
+ callout_fail_id = 0;
+ p++;
+ while(isdigit(*p))
+ callout_fail_id = callout_fail_id * 10 + *p++ - '0';
+ callout_fail_count = 0;
+ if (*p == '!')
+ {
+ p++;
+ while(isdigit(*p))
+ callout_fail_count = callout_fail_count * 10 + *p++ - '0';
+ }
+ }
+ else if (*p == '*')
+ {
+ int sign = 1;
+ callout_data = 0;
+ if (*(++p) == '-') { sign = -1; p++; }
+ while(isdigit(*p))
+ callout_data = callout_data * 10 + *p++ - '0';
+ callout_data *= sign;
+ callout_data_set = 1;
+ }
+ continue;
+
+#if !defined NODFA
+ case 'D':
+#if !defined NOPOSIX
+ if (posix || do_posix)
+ printf("** Can't use dfa matching in POSIX mode: \\D ignored\n");
+ else
+#endif
+ use_dfa = 1;
+ continue;
+
+ case 'F':
+ options |= PCRE_DFA_SHORTEST;
+ continue;
+#endif
+
+ case 'G':
+ if (isdigit(*p))
+ {
+ while(isdigit(*p)) n = n * 10 + *p++ - '0';
+ getstrings |= 1 << n;
+ }
+ else if (isalnum(*p))
+ {
+ uschar *npp = getnamesptr;
+ while (isalnum(*p)) *npp++ = *p++;
+ *npp++ = 0;
+ *npp = 0;
+ n = pcre_get_stringnumber(re, (char *)getnamesptr);
+ if (n < 0)
+ fprintf(outfile, "no parentheses with name \"%s\"\n", getnamesptr);
+ getnamesptr = npp;
+ }
+ continue;
+
+ case 'L':
+ getlist = 1;
+ continue;
+
+ case 'M':
+ find_match_limit = 1;
+ continue;
+
+ case 'N':
+ options |= PCRE_NOTEMPTY;
+ continue;
+
+ case 'O':
+ while(isdigit(*p)) n = n * 10 + *p++ - '0';
+ if (n > size_offsets_max)
+ {
+ size_offsets_max = n;
+ free(offsets);
+ use_offsets = offsets = (int *)malloc(size_offsets_max * sizeof(int));
+ if (offsets == NULL)
+ {
+ printf("** Failed to get %d bytes of memory for offsets vector\n",
+ (int)(size_offsets_max * sizeof(int)));
+ yield = 1;
+ goto EXIT;
+ }
+ }
+ use_size_offsets = n;
+ if (n == 0) use_offsets = NULL; /* Ensures it can't write to it */
+ continue;
+
+ case 'P':
+ options |= PCRE_PARTIAL;
+ continue;
+
+ case 'Q':
+ while(isdigit(*p)) n = n * 10 + *p++ - '0';
+ if (extra == NULL)
+ {
+ extra = (pcre_extra *)malloc(sizeof(pcre_extra));
+ extra->flags = 0;
+ }
+ extra->flags |= PCRE_EXTRA_MATCH_LIMIT_RECURSION;
+ extra->match_limit_recursion = n;
+ continue;
+
+ case 'q':
+ while(isdigit(*p)) n = n * 10 + *p++ - '0';
+ if (extra == NULL)
+ {
+ extra = (pcre_extra *)malloc(sizeof(pcre_extra));
+ extra->flags = 0;
+ }
+ extra->flags |= PCRE_EXTRA_MATCH_LIMIT;
+ extra->match_limit = n;
+ continue;
+
+#if !defined NODFA
+ case 'R':
+ options |= PCRE_DFA_RESTART;
+ continue;
+#endif
+
+ case 'S':
+ show_malloc = 1;
+ continue;
+
+ case 'Z':
+ options |= PCRE_NOTEOL;
+ continue;
+
+ case '?':
+ options |= PCRE_NO_UTF8_CHECK;
+ continue;
+
+ case '<':
+ {
+ int x = check_newline(p, outfile);
+ if (x == 0) goto NEXT_DATA;
+ options |= x;
+ while (*p++ != '>');
+ }
+ continue;
+ }
+ *q++ = c;
+ }
+ *q = 0;
+ len = q - dbuffer;
+
+ /* Move the data to the end of the buffer so that a read over the end of
+ the buffer will be seen by valgrind, even if it doesn't cause a crash. If
+ we are using the POSIX interface, we must include the terminating zero. */
+
+#if !defined NOPOSIX
+ if (posix || do_posix)
+ {
+ memmove(bptr + buffer_size - len - 1, bptr, len + 1);
+ bptr += buffer_size - len - 1;
+ }
+ else
+#endif
+ {
+ memmove(bptr + buffer_size - len, bptr, len);
+ bptr += buffer_size - len;
+ }
+
+ if ((all_use_dfa || use_dfa) && find_match_limit)
+ {
+ printf("**Match limit not relevant for DFA matching: ignored\n");
+ find_match_limit = 0;
+ }
+
+ /* Handle matching via the POSIX interface, which does not
+ support timing or playing with the match limit or callout data. */
+
+#if !defined NOPOSIX
+ if (posix || do_posix)
+ {
+ int rc;
+ int eflags = 0;
+ regmatch_t *pmatch = NULL;
+ if (use_size_offsets > 0)
+ pmatch = (regmatch_t *)malloc(sizeof(regmatch_t) * use_size_offsets);
+ if ((options & PCRE_NOTBOL) != 0) eflags |= REG_NOTBOL;
+ if ((options & PCRE_NOTEOL) != 0) eflags |= REG_NOTEOL;
+
+ rc = regexec(&preg, (const char *)bptr, use_size_offsets, pmatch, eflags);
+
+ if (rc != 0)
+ {
+ (void)regerror(rc, &preg, (char *)buffer, buffer_size);
+ fprintf(outfile, "No match: POSIX code %d: %s\n", rc, buffer);
+ }
+ else if ((((const pcre *)preg.re_pcre)->options & PCRE_NO_AUTO_CAPTURE)
+ != 0)
+ {
+ fprintf(outfile, "Matched with REG_NOSUB\n");
+ }
+ else
+ {
+ size_t i;
+ for (i = 0; i < (size_t)use_size_offsets; i++)
+ {
+ if (pmatch[i].rm_so >= 0)
+ {
+ fprintf(outfile, "%2d: ", (int)i);
+ (void)pchars(dbuffer + pmatch[i].rm_so,
+ pmatch[i].rm_eo - pmatch[i].rm_so, outfile);
+ fprintf(outfile, "\n");
+ if (i == 0 && do_showrest)
+ {
+ fprintf(outfile, " 0+ ");
+ (void)pchars(dbuffer + pmatch[i].rm_eo, len - pmatch[i].rm_eo,
+ outfile);
+ fprintf(outfile, "\n");
+ }
+ }
+ }
+ }
+ free(pmatch);
+ }
+
+ /* Handle matching via the native interface - repeats for /g and /G */
+
+ else
+#endif /* !defined NOPOSIX */
+
+ for (;; gmatched++) /* Loop for /g or /G */
+ {
+ if (timeitm > 0)
+ {
+ register int i;
+ clock_t time_taken;
+ clock_t start_time = clock();
+
+#if !defined NODFA
+ if (all_use_dfa || use_dfa)
+ {
+ int workspace[1000];
+ for (i = 0; i < timeitm; i++)
+ count = pcre_dfa_exec(re, NULL, (char *)bptr, len, start_offset,
+ options | g_notempty, use_offsets, use_size_offsets, workspace,
+ sizeof(workspace)/sizeof(int));
+ }
+ else
+#endif
+
+ for (i = 0; i < timeitm; i++)
+ count = pcre_exec(re, extra, (char *)bptr, len,
+ start_offset, options | g_notempty, use_offsets, use_size_offsets);
+
+ time_taken = clock() - start_time;
+ fprintf(outfile, "Execute time %.4f milliseconds\n",
+ (((double)time_taken * 1000.0) / (double)timeitm) /
+ (double)CLOCKS_PER_SEC);
+ }
+
+ /* If find_match_limit is set, we want to do repeated matches with
+ varying limits in order to find the minimum value for the match limit and
+ for the recursion limit. */
+
+ if (find_match_limit)
+ {
+ if (extra == NULL)
+ {
+ extra = (pcre_extra *)malloc(sizeof(pcre_extra));
+ extra->flags = 0;
+ }
+
+ (void)check_match_limit(re, extra, bptr, len, start_offset,
+ options|g_notempty, use_offsets, use_size_offsets,
+ PCRE_EXTRA_MATCH_LIMIT, &(extra->match_limit),
+ PCRE_ERROR_MATCHLIMIT, "match()");
+
+ count = check_match_limit(re, extra, bptr, len, start_offset,
+ options|g_notempty, use_offsets, use_size_offsets,
+ PCRE_EXTRA_MATCH_LIMIT_RECURSION, &(extra->match_limit_recursion),
+ PCRE_ERROR_RECURSIONLIMIT, "match() recursion");
+ }
+
+ /* If callout_data is set, use the interface with additional data */
+
+ else if (callout_data_set)
+ {
+ if (extra == NULL)
+ {
+ extra = (pcre_extra *)malloc(sizeof(pcre_extra));
+ extra->flags = 0;
+ }
+ extra->flags |= PCRE_EXTRA_CALLOUT_DATA;
+ extra->callout_data = &callout_data;
+ count = pcre_exec(re, extra, (char *)bptr, len, start_offset,
+ options | g_notempty, use_offsets, use_size_offsets);
+ extra->flags &= ~PCRE_EXTRA_CALLOUT_DATA;
+ }
+
+ /* The normal case is just to do the match once, with the default
+ value of match_limit. */
+
+#if !defined NODFA
+ else if (all_use_dfa || use_dfa)
+ {
+ int workspace[1000];
+ count = pcre_dfa_exec(re, NULL, (char *)bptr, len, start_offset,
+ options | g_notempty, use_offsets, use_size_offsets, workspace,
+ sizeof(workspace)/sizeof(int));
+ if (count == 0)
+ {
+ fprintf(outfile, "Matched, but too many subsidiary matches\n");
+ count = use_size_offsets/2;
+ }
+ }
+#endif
+
+ else
+ {
+ count = pcre_exec(re, extra, (char *)bptr, len,
+ start_offset, options | g_notempty, use_offsets, use_size_offsets);
+ if (count == 0)
+ {
+ fprintf(outfile, "Matched, but too many substrings\n");
+ count = use_size_offsets/3;
+ }
+ }
+
+ /* Matched */
+
+ if (count >= 0)
+ {
+ int i, maxcount;
+
+#if !defined NODFA
+ if (all_use_dfa || use_dfa) maxcount = use_size_offsets/2; else
+#endif
+ maxcount = use_size_offsets/3;
+
+ /* This is a check against a lunatic return value. */
+
+ if (count > maxcount)
+ {
+ fprintf(outfile,
+ "** PCRE error: returned count %d is too big for offset size %d\n",
+ count, use_size_offsets);
+ count = use_size_offsets/3;
+ if (do_g || do_G)
+ {
+ fprintf(outfile, "** /%c loop abandoned\n", do_g? 'g' : 'G');
+ do_g = do_G = FALSE; /* Break g/G loop */
+ }
+ }
+
+ for (i = 0; i < count * 2; i += 2)
+ {
+ if (use_offsets[i] < 0)
+ fprintf(outfile, "%2d: <unset>\n", i/2);
+ else
+ {
+ fprintf(outfile, "%2d: ", i/2);
+ (void)pchars(bptr + use_offsets[i],
+ use_offsets[i+1] - use_offsets[i], outfile);
+ fprintf(outfile, "\n");
+ if (i == 0)
+ {
+ if (do_showrest)
+ {
+ fprintf(outfile, " 0+ ");
+ (void)pchars(bptr + use_offsets[i+1], len - use_offsets[i+1],
+ outfile);
+ fprintf(outfile, "\n");
+ }
+ }
+ }
+ }
+
+ for (i = 0; i < 32; i++)
+ {
+ if ((copystrings & (1 << i)) != 0)
+ {
+ char copybuffer[256];
+ int rc = pcre_copy_substring((char *)bptr, use_offsets, count,
+ i, copybuffer, sizeof(copybuffer));
+ if (rc < 0)
+ fprintf(outfile, "copy substring %d failed %d\n", i, rc);
+ else
+ fprintf(outfile, "%2dC %s (%d)\n", i, copybuffer, rc);
+ }
+ }
+
+ for (copynamesptr = copynames;
+ *copynamesptr != 0;
+ copynamesptr += (int)strlen((char*)copynamesptr) + 1)
+ {
+ char copybuffer[256];
+ int rc = pcre_copy_named_substring(re, (char *)bptr, use_offsets,
+ count, (char *)copynamesptr, copybuffer, sizeof(copybuffer));
+ if (rc < 0)
+ fprintf(outfile, "copy substring %s failed %d\n", copynamesptr, rc);
+ else
+ fprintf(outfile, " C %s (%d) %s\n", copybuffer, rc, copynamesptr);
+ }
+
+ for (i = 0; i < 32; i++)
+ {
+ if ((getstrings & (1 << i)) != 0)
+ {
+ const char *substring;
+ int rc = pcre_get_substring((char *)bptr, use_offsets, count,
+ i, &substring);
+ if (rc < 0)
+ fprintf(outfile, "get substring %d failed %d\n", i, rc);
+ else
+ {
+ fprintf(outfile, "%2dG %s (%d)\n", i, substring, rc);
+ pcre_free_substring(substring);
+ }
+ }
+ }
+
+ for (getnamesptr = getnames;
+ *getnamesptr != 0;
+ getnamesptr += (int)strlen((char*)getnamesptr) + 1)
+ {
+ const char *substring;
+ int rc = pcre_get_named_substring(re, (char *)bptr, use_offsets,
+ count, (char *)getnamesptr, &substring);
+ if (rc < 0)
+ fprintf(outfile, "copy substring %s failed %d\n", getnamesptr, rc);
+ else
+ {
+ fprintf(outfile, " G %s (%d) %s\n", substring, rc, getnamesptr);
+ pcre_free_substring(substring);
+ }
+ }
+
+ if (getlist)
+ {
+ const char **stringlist;
+ int rc = pcre_get_substring_list((char *)bptr, use_offsets, count,
+ &stringlist);
+ if (rc < 0)
+ fprintf(outfile, "get substring list failed %d\n", rc);
+ else
+ {
+ for (i = 0; i < count; i++)
+ fprintf(outfile, "%2dL %s\n", i, stringlist[i]);
+ if (stringlist[i] != NULL)
+ fprintf(outfile, "string list not terminated by NULL\n");
+ /* free((void *)stringlist); */
+ pcre_free_substring_list(stringlist);
+ }
+ }
+ }
+
+ /* There was a partial match */
+
+ else if (count == PCRE_ERROR_PARTIAL)
+ {
+ fprintf(outfile, "Partial match");
+#if !defined NODFA
+ if ((all_use_dfa || use_dfa) && use_size_offsets > 2)
+ fprintf(outfile, ": %.*s", use_offsets[1] - use_offsets[0],
+ bptr + use_offsets[0]);
+#endif
+ fprintf(outfile, "\n");
+ break; /* Out of the /g loop */
+ }
+
+ /* Failed to match. If this is a /g or /G loop and we previously set
+ g_notempty after a null match, this is not necessarily the end. We want
+ to advance the start offset, and continue. We won't be at the end of the
+ string - that was checked before setting g_notempty.
+
+ Complication arises in the case when the newline option is "any" or
+ "anycrlf". If the previous match was at the end of a line terminated by
+ CRLF, an advance of one character just passes the \r, whereas we should
+ prefer the longer newline sequence, as does the code in pcre_exec().
+ Fudge the offset value to achieve this.
+
+ Otherwise, in the case of UTF-8 matching, the advance must be one
+ character, not one byte. */
+
+ else
+ {
+ if (g_notempty != 0)
+ {
+ int onechar = 1;
+ unsigned int obits = ((real_pcre *)re)->options;
+ use_offsets[0] = start_offset;
+ if ((obits & PCRE_NEWLINE_BITS) == 0)
+ {
+ int d;
+ (void)pcre_config(PCRE_CONFIG_NEWLINE, &d);
+ obits = (d == '\r')? PCRE_NEWLINE_CR :
+ (d == '\n')? PCRE_NEWLINE_LF :
+ (d == ('\r'<<8 | '\n'))? PCRE_NEWLINE_CRLF :
+ (d == -2)? PCRE_NEWLINE_ANYCRLF :
+ (d == -1)? PCRE_NEWLINE_ANY : 0;
+ }
+ if (((obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANY ||
+ (obits & PCRE_NEWLINE_BITS) == PCRE_NEWLINE_ANYCRLF)
+ &&
+ start_offset < len - 1 &&
+ bptr[start_offset] == '\r' &&
+ bptr[start_offset+1] == '\n')
+ onechar++;
+ else if (use_utf8)
+ {
+ while (start_offset + onechar < len)
+ {
+ int tb = bptr[start_offset+onechar];
+ if (tb <= 127) break;
+ tb &= 0xc0;
+ if (tb != 0 && tb != 0xc0) onechar++;
+ }
+ }
+ use_offsets[1] = start_offset + onechar;
+ }
+ else
+ {
+ if (count == PCRE_ERROR_NOMATCH)
+ {
+ if (gmatched == 0) fprintf(outfile, "No match\n");
+ }
+ else fprintf(outfile, "Error %d\n", count);
+ break; /* Out of the /g loop */
+ }
+ }
+
+ /* If not /g or /G we are done */
+
+ if (!do_g && !do_G) break;
+
+ /* If we have matched an empty string, first check to see if we are at
+ the end of the subject. If so, the /g loop is over. Otherwise, mimic
+ what Perl's /g options does. This turns out to be rather cunning. First
+ we set PCRE_NOTEMPTY and PCRE_ANCHORED and try the match again at the
+ same point. If this fails (picked up above) we advance to the next
+ character. */
+
+ g_notempty = 0;
+
+ if (use_offsets[0] == use_offsets[1])
+ {
+ if (use_offsets[0] == len) break;
+ g_notempty = PCRE_NOTEMPTY | PCRE_ANCHORED;
+ }
+
+ /* For /g, update the start offset, leaving the rest alone */
+
+ if (do_g) start_offset = use_offsets[1];
+
+ /* For /G, update the pointer and length */
+
+ else
+ {
+ bptr += use_offsets[1];
+ len -= use_offsets[1];
+ }
+ } /* End of loop for /g and /G */
+
+ NEXT_DATA: continue;
+ } /* End of loop for data lines */
+
+ CONTINUE:
+
+#if !defined NOPOSIX
+ if (posix || do_posix) regfree(&preg);
+#endif
+
+ if (re != NULL) new_free(re);
+ if (extra != NULL) new_free(extra);
+ if (tables != NULL)
+ {
+ new_free((void *)tables);
+ setlocale(LC_CTYPE, "C");
+ locale_set = 0;
+ }
+ }
+
+if (infile == stdin) fprintf(outfile, "\n");
+
+EXIT:
+
+if (infile != NULL && infile != stdin) fclose(infile);
+if (outfile != NULL && outfile != stdout) fclose(outfile);
+
+free(buffer);
+free(dbuffer);
+free(pbuffer);
+free(offsets);
+
+return yield;
+}
+
+/* End of pcretest.c */