Fixed lots of issues with installing a low-caps version of fshell from SIS file.
* Fixed issue in CCommandFactory whereby some APIs like GetCommandInfoL could trigger allocations on the wrong heap or signals to the wrong thread. The symptoms were often seen as a crash in the which_00 thread when running ciftest.
* Lots of build fixes for when FSHELL_PROTECTED_UIDS isn't defined and when all capabilities aren't available.
* Added new platform.mmh macro FSHELL_OPEN_SIGNED.
* Open signing of fshell SIS files is now supported for production S60 handsets. Build fshell with the FSHELL_OPEN_SIGNED macro defined (and without defining FSHELL_CAP_ALL or FSHELL_PROTECTED_UIDS) in your platform.mmh and submit \epoc32\fshell\fshell.unsigned.sis to https://www.symbiansigned.com/app/page/public/openSignedOnline.do . The following commands are not available when using Open Signing due to Platform Security restrictions: fdb; kerninfo; chunkinfo; svrinfo; objinfo; sudo; fsck; localdrive; ramdefrag; readmem; reboot; setcritical; setpriority. Others such as chkdeps, e32header, ps, and fshell itself will run but in a restricted capacity (for example, fshell will no longer allow you to modify files in the \sys\bin directory).
* Removed commands objinfo, svrinfo, chunkinfo, readmem, fsck completely when memory access isn't present - previously they would still appear in the help but would give an error if you tried to run them.
#!fshell
# comm.script
#
# Copyright (c) 2010 Accenture. All rights reserved.
# This component and the accompanying materials are made available
# under the terms of the "Eclipse Public License v1.0"
# which accompanies this distribution, and is available
# at the URL "http://www.eclipse.org/legal/epl-v10.html".
#
# Initial Contributors:
# Accenture - Initial contribution
#
variant wins && error -5 "comm.script is not supported on the emulator"
# NaviEngine, port next to VGA
variant naviengine && export ARGS "--console vt100busdevcons --console-title pdd=euart1,ldd=ecomm,port=1,rate=115200"
# H4, serial riser marked "J3"
variant h4 && export ARGS "--console vt100cons --console-title port=COMM::3,rate=115200"
# H6 - port marked "UART 3"
variant h6 && export ARGS "--console vt100busdevcons --console-title pdd=euart1,ldd=ecomm,port=7,rate=115200"
# Beagle board, serial riser marked RS232 P9.
variant beagle && export ARGS "--console vt100busdevcons --console-title port=2,rate=115200"
# OPP Mid-Size Prototype, requires a special USB cable with a UART bridge built into it (normally covered in heat shrink) or a "black box".
variant opp-mid-size && export ARGS "--console vt100busdevcons --console-title pdd=euart1,ldd=ecomm,rate=115200,port=4"
# QEMU simulator - assumes you're using 2nd emulated serial port for fshell, ie with options similar to "-serial file:rdebug.txt -serial COMx"
variant qemu && export ARGS "--console vt100busdevcons --console-title pdd=eserial,ldd=ecomm,rate=115200,port=1"
# Bridge - terminal keyboard is broken for some reason, but USB now works
variant -u 0x85001100 && export ARGS "--console vt100usbcons --console-title port=ACM::1,personality=1"
# Add new variants here
# Only try terminal keyboard if there hasn't been a better match for the hardware (and tracecore is supported)
# Therefore, this rule should stay near the bottom of the file
var ARGS not-defined && variant tracecore-support && export ARGS "--console terminalkeyboardcons --console-size 120,40"
# And finally, start fshell with the given configuration
var ARGS defined || error -5 "Variant not recognised, can't open serial connection"
fshell $ARGS &