diff -r 000000000000 -r 7f656887cf89 libraries/spcre/libpcre/inc/config.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/libraries/spcre/libpcre/inc/config.h Wed Jun 23 15:52:26 2010 +0100 @@ -0,0 +1,318 @@ +#include +#ifndef _PCRE_CONFIG_H +#define _PCRE_CONFIG_H + +/* config.h. Generated from config.h.in by configure. */ +/* config.h.in. Generated from configure.ac by autoheader. */ + + +/* On Unix-like systems config.h.in is converted by "configure" into config.h. +Some other environments also support the use of "configure". PCRE is written in +Standard C, but there are a few non-standard things it can cope with, allowing +it to run on SunOS4 and other "close to standard" systems. + +If you are going to build PCRE "by hand" on a system without "configure" you +should copy the distributed config.h.generic to config.h, and then set up the +macro definitions the way you need them. You must then add -DHAVE_CONFIG_H to +all of your compile commands, so that config.h is included at the start of +every source. + +Alternatively, you can avoid editing by using -D on the compiler command line +to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H. + +PCRE uses memmove() if HAVE_MEMMOVE is set to 1; otherwise it uses bcopy() if +HAVE_BCOPY is set to 1. If your system has neither bcopy() nor memmove(), set +them both to 0; an emulation function will be used. */ + +/* By default, the \R escape sequence matches any Unicode line ending + character or sequence of characters. If BSR_ANYCRLF is defined, this is + changed so that backslash-R matches only CR, LF, or CRLF. The build- time + default can be overridden by the user of PCRE at runtime. On systems that + support it, "configure" can be used to override the default. */ +/* #undef BSR_ANYCRLF */ + +/* If you are compiling for a system that uses EBCDIC instead of ASCII + character codes, define this macro as 1. On systems that can use + "configure", this can be done via --enable-ebcdic. */ +/* #undef EBCDIC */ + +/* Define to 1 if you have the `bcopy' function. */ +#ifndef HAVE_BCOPY +#define HAVE_BCOPY 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_BITS_TYPE_TRAITS_H */ + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_BZLIB_H +#define HAVE_BZLIB_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_DIRENT_H +#define HAVE_DIRENT_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_DLFCN_H +#define HAVE_DLFCN_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_INTTYPES_H +#define HAVE_INTTYPES_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_LIMITS_H +#define HAVE_LIMITS_H 1 +#endif + +/* Define to 1 if the system has the type `long long'. */ +#ifndef HAVE_LONG_LONG +#define HAVE_LONG_LONG 1 +#endif + +/* Define to 1 if you have the `memmove' function. */ +#ifndef HAVE_MEMMOVE +#define HAVE_MEMMOVE 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_MEMORY_H +#define HAVE_MEMORY_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_READLINE_HISTORY_H +#define HAVE_READLINE_HISTORY_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_READLINE_READLINE_H +#define HAVE_READLINE_READLINE_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_STDINT_H +#define HAVE_STDINT_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_STDLIB_H +#define HAVE_STDLIB_H 1 +#endif + +/* Define to 1 if you have the `strerror' function. */ +#ifndef HAVE_STRERROR +#define HAVE_STRERROR 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_STRING +#define HAVE_STRING 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_STRINGS_H +#define HAVE_STRINGS_H 0 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_STRING_H +#define HAVE_STRING_H 1 +#endif + +/* Define to 1 if you have the `strtoll' function. */ +/* #undef HAVE_STRTOLL */ + +/* Define to 1 if you have the `strtoq' function. */ +#ifndef HAVE_STRTOQ +#define HAVE_STRTOQ 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_SYS_STAT_H +#define HAVE_SYS_STAT_H 1 +#endif + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_SYS_TYPES_H +#define HAVE_SYS_TYPES_H 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_TYPE_TRAITS_H */ + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_UNISTD_H +#define HAVE_UNISTD_H 1 +#endif + +/* Define to 1 if the system has the type `unsigned long long'. */ +#ifndef HAVE_UNSIGNED_LONG_LONG +#define HAVE_UNSIGNED_LONG_LONG 1 +#endif + +/* Define to 1 if you have the header file. */ +/* #undef HAVE_WINDOWS_H */ + +/* Define to 1 if you have the header file. */ +#ifndef HAVE_ZLIB_H +#define HAVE_ZLIB_H 0 +#endif + +/* Define to 1 if you have the `_strtoi64' function. */ +/* #undef HAVE__STRTOI64 */ + +/* The value of LINK_SIZE determines the number of bytes used to store links + as offsets within the compiled regex. The default is 2, which allows for + compiled patterns up to 64K long. This covers the vast majority of cases. + However, PCRE can also be compiled to use 3 or 4 bytes instead. This allows + for longer patterns in extreme cases. On systems that support it, + "configure" can be used to override this default. */ +#ifndef LINK_SIZE +#define LINK_SIZE 2 +#endif + +/* The value of MATCH_LIMIT determines the default number of times the + internal match() function can be called during a single execution of + pcre_exec(). There is a runtime interface for setting a different limit. + The limit exists in order to catch runaway regular expressions that take + for ever to determine that they do not match. The default is set very large + so that it does not accidentally catch legitimate cases. On systems that + support it, "configure" can be used to override this default default. */ +#ifndef MATCH_LIMIT +#define MATCH_LIMIT 10000000 +#endif + +/* The above limit applies to all calls of match(), whether or not they + increase the recursion depth. In some environments it is desirable to limit + the depth of recursive calls of match() more strictly, in order to restrict + the maximum amount of stack (or heap, if NO_RECURSE is defined) that is + used. The value of MATCH_LIMIT_RECURSION applies only to recursive calls of + match(). To have any useful effect, it must be less than the value of + MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There is + a runtime method for setting a different limit. On systems that support it, + "configure" can be used to override the default. */ +#ifndef MATCH_LIMIT_RECURSION +#define MATCH_LIMIT_RECURSION MATCH_LIMIT +#endif + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_COUNT +#define MAX_NAME_COUNT 10000 +#endif + +/* This limit is parameterized just in case anybody ever wants to change it. + Care must be taken if it is increased, because it guards against integer + overflow caused by enormously large patterns. */ +#ifndef MAX_NAME_SIZE +#define MAX_NAME_SIZE 32 +#endif + +/* The value of NEWLINE determines the newline character sequence. On systems + that support it, "configure" can be used to override the default, which is + 10. The possible values are 10 (LF), 13 (CR), 3338 (CRLF), -1 (ANY), or -2 + (ANYCRLF). */ +#ifndef NEWLINE +#define NEWLINE 10 +#endif + +/* PCRE uses recursive function calls to handle backtracking while matching. + This can sometimes be a problem on systems that have stacks of limited + size. Define NO_RECURSE to get a version that doesn't use recursion in the + match() function; instead it creates its own stack by steam using + pcre_recurse_malloc() to obtain memory from the heap. For more detail, see + the comments and other stuff just above the match() function. On systems + that support it, "configure" can be used to set this in the Makefile (use + --disable-stack-for-recursion). */ +#define NO_RECURSE + +/* Name of package */ +#define PACKAGE "pcre" + +/* Define to the address where bug reports for this package should be sent. */ +#define PACKAGE_BUGREPORT "" + +/* Define to the full name of this package. */ +#define PACKAGE_NAME "PCRE" + +/* Define to the full name and version of this package. */ +#define PACKAGE_STRING "PCRE 7.8" + +/* Define to the one symbol short name of this package. */ +#define PACKAGE_TARNAME "pcre" + +/* Define to the version of this package. */ +#define PACKAGE_VERSION "7.8" + + +/* If you are compiling for a system other than a Unix-like system or + Win32, and it needs some magic to be inserted before the definition + of a function that is exported by the library, define this macro to + contain the relevant magic. If you do not define this macro, it + defaults to "extern" for a C compiler and "extern C" for a C++ + compiler on non-Win32 systems. This macro apears at the start of + every exported function that is part of the external API. It does + not appear on functions that are "external" in the C sense, but + which are internal to the library. */ + +/* Define if linking statically (TODO: make nice with Libtool) */ +/* #undef PCRE_STATIC */ + + +/* When calling PCRE via the POSIX interface, additional working storage is + required for holding the pointers to capturing substrings because PCRE + requires three integers per substring, whereas the POSIX interface provides + only two. If the number of expected substrings is small, the wrapper + function uses space on the stack, because this is faster than using + malloc() for each call. The threshold above which the stack is no longer + used is defined by POSIX_MALLOC_THRESHOLD. On systems that support it, + "configure" can be used to override this default. */ +#ifndef POSIX_MALLOC_THRESHOLD +#define POSIX_MALLOC_THRESHOLD 10 +#endif + +/* Define to 1 if you have the ANSI C header files. */ +#ifndef STDC_HEADERS +#define STDC_HEADERS 1 +#endif + +/* Define to allow pcregrep to be linked with libbz2, so that it is able to + handle .bz2 files. */ + #undef SUPPORT_LIBBZ2 + +/* Define to allow pcretest to be linked with libreadline. */ + #undef SUPPORT_LIBREADLINE + +/* Define to allow pcregrep to be linked with libz, so that it is able to + handle .gz files. */ + #undef SUPPORT_LIBZ + +/* Define to enable support for Unicode properties */ +#define SUPPORT_UCP + +/* Define to enable support for the UTF-8 Unicode encoding. */ +#define SUPPORT_UTF8 + +/* Version number of package */ +#ifndef VERSION +#define VERSION "7.8" +#endif + +/* Define to empty if `const' does not conform to ANSI C. */ +/* #undef const */ + +/* Define to `unsigned int' if does not define. */ +/* #undef size_t */ + +#define PCRE_EXP_DECL IMPORT_C +#define PCRE_EXP_DEFN EXPORT_C + +typedef TInt BOOL; + +#endif //_PCRE_CONFIG_H