//

// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description: 

//

//! 	@file

//! 	@SYMTestSuiteName		pbase-f32-sfsrv-publicapi-rem

//!	@SYMScriptTestEnvironment	This test script requires a basic ROM and a MMC card (128 MB recommended, not tested above that).

//! 	@SYMScriptAuthor 		Alvar Udras, Runno Sgirka

//! 	@SYMScriptDescription		The test script contains API tests for the following functions of RRawDisk class:

//!	TInt Open(RFs &aFs, TInt aDrive);

//!	void Close();

//!	TInt Read(TInt64 aPos, TDes8 &aDes);

//!	TInt Write(TInt64 aPos, TDesC8 &aDes);

//!					The tests are containing risk, e.g. Write() method call can corrupt the boot sector or

//!					non-writable sector of the disc, which may corrupt the whole disk forever.

LOAD_SUITE	t_sfsrv

DELAY 5000

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-0001

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-0001

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Functions Open() and Close() test. Open a disk channel and close it.

//!				Uses API elements: Open(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Close() method to close the channel.

//!				5. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Open() method call is completed returning KErrNone. The Close() method call is completed without errors. 

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		COMMAND		rfs1	new

		COMMAND		rfs1	Connect

		COMMAND		rawdisk1	new

		COMMAND		rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-0001-001-Open_command05

		COMMAND		rawdisk1	Close

		COMMAND		rawdisk1	~

		COMMAND		rfs1	Close

		COMMAND		rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-0001

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-0002

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-0002

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Write() and Read() test. Open a disk channel, write to the disc, verify it by reading and close the channel.

//!				Uses API elements: Open(), Write(), Read(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Write(TInt64 aPos, TDes8 &aDes) method passing position 1024 and string 'Hello Big World!' to write

//!				   as parameters.

//!				5. Call Read(TInt64 aPos, TDes8 &aDes) method passing position 1024 and string 'Hello Big World!' for 

//!				   verification as parameters.

//!				6. Call Close() method to close the disk.

//!				7. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Read() and Write() method calls are completed returning KErrNone.

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		COMMAND		rfs1	new

		COMMAND		rfs1	Connect

		COMMAND		rawdisk1	new

		COMMAND		rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-0002-001-Open_command05

		COMMAND		rawdisk1	Write		PBASE-F32-RawDisk-PublicApi-0002-001-Write_command06

		COMMAND		rawdisk1	Read		PBASE-F32-RawDisk-PublicApi-0002-001-Read_command07

		COMMAND		rawdisk1	Close

		COMMAND		rawdisk1	~

		COMMAND		rfs1	Close

		COMMAND		rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-0002

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-0003

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-0003

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Write() and Read() test. Open a disk channel, write and read an empty string and close the channel.

//!				Uses API elements: Open(), Write(), Read(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Write(TInt64 aPos, TDes8 &aDes) method passing position 1024 and empty string to write

//!				   as parameters.

//!				5. Call Read(TInt64 aPos, TDes8 &aDes) method passing position 1024 and empty string for 

//!				   verification as parameters.

//!				6. Call Close() method to close the disk.

//!				7. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Read() and Write() method calls are completed returning KErrNone.

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		COMMAND		rfs1	new

		COMMAND		rfs1	Connect

		COMMAND		rawdisk1	new

		COMMAND		rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-0003-001-Open_command05

		COMMAND		rawdisk1	Write		PBASE-F32-RawDisk-PublicApi-0003-001-Write_command06

		COMMAND		rawdisk1	Read		PBASE-F32-RawDisk-PublicApi-0003-001-Read_command07

		COMMAND		rawdisk1	Close

		COMMAND		rawdisk1	~

		COMMAND		rfs1	Close

		COMMAND		rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-0003

// 	************************

//	***  NEGATIVE TESTS  ***

// 	************************

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1007

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1007

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Test that checks that no other resources can access the disk while direct access to it is in effect.

//!				Uses API elements: Open(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Create a RFile instance, passing fileserver session, EFileShareAny and {removable drive path}test03.txt as parameters.

//!				5. Close the RFile instance.

//!				6. Call Close() method to close the channel.

//!				7. Format the disk for future usage.

//!				8. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The RFormat::Open() method call returns error -14 (KErrInUse).

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		CREATE_OBJECT	RFile	file

		COMMAND			rfs1	new

		COMMAND			rfs1	Connect

		COMMAND			rawdisk1	new

		COMMAND			rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1007-001-Open_command05

		COMMAND			file		new

		COMMAND	!Error=-14	file		Create		PBASE-F32-RawDisk-PublicApi-1007-001-Create_command07

		COMMAND			file		Close

		COMMAND			file		~	

		COMMAND			rawdisk1	Close

		COMMAND			rawdisk1	~

		COMMAND			rfs1	Close

		COMMAND			rfs1	~		

	END_TEST_BLOCK

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1007

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1008

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1008

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Open() test. Call Open() after opening a resource on the disk.

//!				Uses API elements: Open(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Open an RFormat instance, passing fileserver session, removable drive and EHighDensity as parameters.

//!				4. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				5. Call Close() method to close the channel.

//!				6. Close the RFormat instance.

//!				7. Format the disk for future usage.

//!				8. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Open() method call returns error -14 (KErrInUse).

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		CREATE_OBJECT	RFormat	format1

		COMMAND			rfs1	new

		COMMAND			rfs1	Connect

		COMMAND			format1		new

		COMMAND			format1		Open		PBASE-F32-RawDisk-PublicApi-1008-001-Open_command05

		COMMAND			rawdisk1	new

		COMMAND	!Error=-14	rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1008-001-Open_command07		

		COMMAND			format1		Close

		COMMAND			format1		~	

		COMMAND			rawdisk1	Close

		COMMAND			rawdisk1	~

		COMMAND			rfs1	Close

		COMMAND			rfs1	~		

	END_TEST_BLOCK

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1008

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1009

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1009

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Test that checks that calling Close() allows other resources to access the disk.

//!				Uses API elements: Open(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Close() method to close the channel.

//!				5. Open an RFormat instance, passing fileserver session, removable drive and EHighDensity as parameters.

//!				6. Close the RFormat instance.

//!				7. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The RFormat instance can access the disk without errors.

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		CREATE_OBJECT	RFormat	format1

		COMMAND		rfs1	new

		COMMAND		rfs1	Connect

		COMMAND		rawdisk1	new

		COMMAND		rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1009-001-Open_command05		

		COMMAND		rawdisk1	Close

		COMMAND		rawdisk1	~

		COMMAND		format1		new

		COMMAND		format1		Open		PBASE-F32-RawDisk-PublicApi-1009-001-Open_command09

		COMMAND		format1		Close

		COMMAND		format1		~

		COMMAND		rfs1	Close

		COMMAND		rfs1	~		

	END_TEST_BLOCK

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1009

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1010

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1010

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Write() test. Open a disk channel, write to the disc, while starting writing from a negative position.

//!				Uses API elements: Open(), Write(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Write(TInt64 aPos, TDes8 &aDes) method passing -1 as position, string 'Hello World!' to write as parameters.

//!				6. Call Close() method to close the disk.

//!				7. Format the disk for future usage.

//!				8. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Write() method call returns error -6 (KErrArgument).

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		CREATE_OBJECT	RFormat	format1

		COMMAND			rfs1	new

		COMMAND			rfs1	Connect

		COMMAND			rawdisk1	new

		COMMAND			rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1010-001-Open_command05

		COMMAND	!Error=-6	rawdisk1	Write		PBASE-F32-RawDisk-PublicApi-1010-001-Write_command06

		COMMAND			rawdisk1	Close

		COMMAND			rawdisk1	~

		COMMAND			format1		new

		COMMAND			format1		Open		PBASE-F32-RawDisk-PublicApi-1010-001-Open_command10

		COMMAND			format1		Next

		COMMAND			format1		Close

		COMMAND			format1		~

		COMMAND			rfs1	Close

		COMMAND			rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1010

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1011

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1011

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Write() test. Open a disk channel, write to the disc, while starting writing from an out of range position.

//!				Uses API elements: Open(), Write(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Write(TInt64 aPos, TDes8 &aDes) method passing 10000000 as position, string 'Hello World!' as parameters.

//!				6. Call Close() method to close the disk.

//!				7. Format the disk for future usage.

//!				8. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Write() method call returns error -20 (KErrCorrupt).

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		CREATE_OBJECT	RFormat	format1

		COMMAND			rfs1	new

		COMMAND			rfs1	Connect

		COMMAND			rawdisk1	new

		COMMAND			rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1011-001-Open_command05

		COMMAND	!Error=-20	rawdisk1	Write		PBASE-F32-RawDisk-PublicApi-1011-001-Write_command06

		COMMAND			rawdisk1	Close

		COMMAND			rawdisk1	~

		COMMAND			format1		new

		COMMAND			format1		Open		PBASE-F32-RawDisk-PublicApi-1011-001-Open_command10

		COMMAND			format1		Next

		COMMAND			format1		Close

		COMMAND			rfs1	Close

		COMMAND			rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1011

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1012

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1012

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Read() test. Open a disk channel, read from disc, starting reading from a negative position, and close the channel.

//!				Uses API elements: Open(), Read(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Read(TInt64 aPos, TDes8 &aDes) method passing -1 as position, string 'Hello World!' as parameters.

//!				5. Call Close() method to close the disk.

//!				6. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Read() method call returns error -6 (KErrArgument).

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		COMMAND			rfs1	new

		COMMAND			rfs1	Connect

		COMMAND			rawdisk1	new

		COMMAND			rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1012-001-Open_command05

		COMMAND	!Error=-6	rawdisk1	Read		PBASE-F32-RawDisk-PublicApi-1012-001-Read_command06

		COMMAND			rawdisk1	Close

		COMMAND			rawdisk1	~

		COMMAND			rfs1	Close

		COMMAND			rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1012

START_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1013

//! @SYMTestCaseID		PBASE-F32-RawDisk-PublicApi-1013

//! @SYMAPI			RRawDisk

//! @SYMTestCaseDesc		Function Read() test. Open a disk channel, read from disc, starting reading from an out of range position,

//!				and close the channel.

//!				Uses API elements: Open(), Read(), Close().

//! @SYMTestActions		1. Create a RFs session.

//!				2. Connect the RFs session.

//!				3. Call Open(RFs &aFs, TInt aDrive) method to open a direct access channel to disk, passing fileserver session, removable

//!				   drive as parameters.

//!				4. Call Read(TInt64 aPos, TDes8 &aDes) method passing 10000000 as position, string 'Hello World!' as parameters.

//!				5. Call Close() method to close the disk.

//!				6. Close the RFs session.

//! @SYMTestStatus		Implemented

//! @SYMTestPriority		Critical

//! @SYMTestExpectedResults	The Read() method call returns error -20 (KErrCorrupt).

//! @SYMTestType		CIT

	START_TEST_BLOCK	100	t_sfsrv	\base\PBASE-F32-RawDisk-PublicApi.ini 

		CREATE_OBJECT	RFs	rfs1

		CREATE_OBJECT	RRawDisk	rawdisk1

		COMMAND			rfs1	new

		COMMAND			rfs1	Connect

		COMMAND			rawdisk1	new

		COMMAND			rawdisk1	Open		PBASE-F32-RawDisk-PublicApi-1013-001-Open_command05

		COMMAND	!Error=-20	rawdisk1	Read		PBASE-F32-RawDisk-PublicApi-1013-001-Read_command06

		COMMAND			rawdisk1	Close

		COMMAND			rawdisk1	~

		COMMAND			rfs1	Close

		COMMAND			rfs1	~		

	END_TEST_BLOCK	

END_TESTCASE 			PBASE-F32-RawDisk-PublicApi-1013