// Copyright (c) 1998-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

//

#include "memmodel.h"

#include "mm.h"

#include "mmu.h"

#include "mpager.h"

#include "mrom.h"

/**	Returns the amount of free RAM currently available.

@return The number of bytes of free RAM currently available.

@pre	any context

 */

EXPORT_C TInt Kern::FreeRamInBytes()

	{

	TUint numPages = TheMmu.FreeRamInPages();

	// hack, clip free RAM to fit into a signed integer...

	if(numPages>(KMaxTInt>>KPageShift))

		return KMaxTInt;

	return numPages*KPageSize;

	}

/**	Rounds up the argument to the size of a MMU page.

	To find out the size of a MMU page:

	@code

	size = Kern::RoundToPageSize(1);

	@endcode

	@param aSize Value to round up

	@pre any context

 */

EXPORT_C TUint32 Kern::RoundToPageSize(TUint32 aSize)

	{

	return (aSize+KPageMask)&~KPageMask;

	}

/**	Rounds up the argument to the amount of memory mapped by a MMU page 

	directory entry.

	Chunks occupy one or more consecutive page directory entries (PDE) and

	therefore the amount of linear and physical memory allocated to a chunk is

	always a multiple of the amount of memory mapped by a page directory entry.

 */

EXPORT_C TUint32 Kern::RoundToChunkSize(TUint32 aSize)

	{

	return (aSize+KChunkMask)&~KChunkMask;

	}

//

// Epoc class

// 

#ifdef BTRACE_KERNEL_MEMORY

TInt   Epoc::DriverAllocdPhysRam = 0;

TInt   Epoc::KernelMiscPages = 0;

#endif

/**

Allows the variant to specify the details of the RAM zones. This should be invoked 

by the variant in its implementation of the pure virtual function Asic::Init1().

There are some limitations to how the RAM zones can be specified:

- Each RAM zone's address space must be distinct and not overlap with any 

other RAM zone's address space

- Each RAM zone's address space must have a size that is multiples of the 

ASIC's MMU small page size and be aligned to the ASIC's MMU small page size, 

usually 4KB on ARM MMUs.

- When taken together all of the RAM zones must cover the whole of the physical RAM

address space as specified by the bootstrap in the SuperPage members iTotalRamSize

and iRamBootData;.

- There can be no more than KMaxRamZones RAM zones specified by the base port

Note the verification of the RAM zone data is not performed here but by the ram 

allocator later in the boot up sequence.  This is because it is only possible to

verify the zone data once the physical RAM configuration has been read from 

the super page. Any verification errors result in a "RAM-ALLOC" panic 

faulting the kernel during initialisation.

@param aZones Pointer to an array of SRamZone structs containing the details for all 

the zones. The end of the array is specified by an element with an iSize of zero. The array must 

remain in memory at least until the kernel has successfully booted.

@param aCallback Pointer to a call back function that the kernel may invoke to request 

one of the operations specified by TRamZoneOp.

@return KErrNone if successful, otherwise one of the system wide error codes

@see TRamZoneOp

@see SRamZone

@see TRamZoneCallback

*/

EXPORT_C TInt Epoc::SetRamZoneConfig(const SRamZone* aZones, TRamZoneCallback aCallback)

	{

	TRamZoneCallback dummy;

	// Ensure this is only called once and only while we are initialising the kernel

	if (!K::Initialising || TheMmu.RamZoneConfig(dummy) != NULL)

		{// fault kernel, won't return

		K::Fault(K::EBadSetRamZoneConfig);

		}

	if (NULL == aZones)

		{

		return KErrArgument;

		}

	TheMmu.SetRamZoneConfig(aZones, aCallback);

	return KErrNone;

	}

/**

Modify the specified RAM zone's flags.

This allows the BSP or device driver to configure which type of pages, if any,

can be allocated into a RAM zone by the system.

Note: updating a RAM zone's flags can result in

	1 - memory allocations failing despite there being enough free RAM in the system.

	2 - the methods TRamDefragRequest::EmptyRamZone(), TRamDefragRequest::ClaimRamZone()

	or TRamDefragRequest::DefragRam() never succeeding.

The flag masks KRamZoneFlagDiscardOnly, KRamZoneFlagMovAndDisOnly and KRamZoneFlagNoAlloc

are intended to be used with this method.

@param aId			The ID of the RAM zone to modify.

@param aClearMask	The bit mask to clear, each flag of which must already be set on the RAM zone.

@param aSetMask		The bit mask to set.

@return KErrNone on success, KErrArgument if the RAM zone of aId not found or if 

aSetMask contains invalid flag bits.

@see TRamDefragRequest::EmptyRamZone()

@see TRamDefragRequest::ClaimRamZone()

@see TRamDefragRequest::DefragRam()

@see KRamZoneFlagDiscardOnly

@see KRamZoneFlagMovAndDisOnly

@see KRamZoneFlagNoAlloc

*/

EXPORT_C TInt Epoc::ModifyRamZoneFlags(TUint aId, TUint aClearMask, TUint aSetMask)

	{

	RamAllocLock::Lock();

	TInt r = TheMmu.ModifyRamZoneFlags(aId, aClearMask, aSetMask);

	RamAllocLock::Unlock();

	return r;

	}

/**

Gets the current count of a particular RAM zone's pages by type.

@param aId The ID of the RAM zone to enquire about

@param aPageData If successful, on return this contains the page count

@return KErrNone if successful, KErrArgument if a RAM zone of aId is not found or

one of the system wide error codes 

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@see SRamZonePageCount

*/

EXPORT_C TInt Epoc::GetRamZonePageCount(TUint aId, SRamZonePageCount& aPageData)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL,"Epoc::GetRamZonePageCount");

	RamAllocLock::Lock();

	TInt r = TheMmu.GetRamZonePageCount(aId, aPageData);

	RamAllocLock::Unlock();

	return r;

	}

/**

Allocate a block of physically contiguous RAM with a physical address aligned

to a specified power of 2 boundary.

When the RAM is no longer required it should be freed using

Epoc::FreePhysicalRam()

@param	aSize		The size in bytes of the required block. The specified size

					is rounded up to the page size, since only whole pages of

					physical RAM can be allocated.

@param	aPhysAddr	Receives the physical address of the base of the block on

					successful allocation.

@param	aAlign		Specifies the number of least significant bits of the

					physical address which are required to be zero. If a value

					less than log2(page size) is specified, page alignment is

					assumed. Pass 0 for aAlign if there are no special alignment

					constraints (other than page alignment).

@return	KErrNone if the allocation was successful.

		KErrNoMemory if a sufficiently large physically contiguous block of free

		RAM	with the specified alignment could not be found.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::AllocPhysicalRam(TInt aSize, TPhysAddr& aPhysAddr, TInt aAlign)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL,"Epoc::AllocPhysicalRam");

	RamAllocLock::Lock();

	TInt r = TheMmu.AllocPhysicalRam

		(

		aPhysAddr,

		MM::RoundToPageCount(aSize),

		MM::RoundToPageShift(aAlign),

		(Mmu::TRamAllocFlags)EMemAttStronglyOrdered

		);

	RamAllocLock::Unlock();

	return r;

	}

/**

Allocate a block of physically contiguous RAM with a physical address aligned

to a specified power of 2 boundary from the specified zone.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

Note that this method only respects the KRamZoneFlagNoAlloc flag and will always attempt

to allocate regardless of whether the other flags are set for the specified RAM zones 

or not.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

@param 	aZoneId		The ID of the zone to attempt to allocate from.

@param	aSize		The size in bytes of the required block. The specified size

					is rounded up to the page size, since only whole pages of

					physical RAM can be allocated.

@param	aPhysAddr	Receives the physical address of the base of the block on

					successful allocation.

@param	aAlign		Specifies the number of least significant bits of the

					physical address which are required to be zero. If a value

					less than log2(page size) is specified, page alignment is

					assumed. Pass 0 for aAlign if there are no special alignment

					constraints (other than page alignment).

@return	KErrNone if the allocation was successful.

		KErrNoMemory if a sufficiently large physically contiguous block of free

		RAM	with the specified alignment could not be found within the specified 

		zone.

		KErrArgument if a RAM zone of the specified ID can't be found or if the

		RAM zone has a total number of physical pages which is less than those 

		requested for the allocation.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::ZoneAllocPhysicalRam(TUint aZoneId, TInt aSize, TPhysAddr& aPhysAddr, TInt aAlign)

	{

	return ZoneAllocPhysicalRam(&aZoneId, 1, aSize, aPhysAddr, aAlign);

	}

/**

Allocate a block of physically contiguous RAM with a physical address aligned

to a specified power of 2 boundary from the specified RAM zones.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

RAM will be allocated into the RAM zones in the order they are specified in the 

aZoneIdList parameter. If the contiguous allocations are intended to span RAM zones 

when required then aZoneIdList should be listed with the RAM zones in ascending 

physical address order.

Note that this method only respects the KRamZoneFlagNoAlloc flag and will always attempt

to allocate regardless of whether the other flags are set for the specified RAM zones 

or not.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

@param 	aZoneIdList	A pointer to an array of RAM zone IDs of the RAM zones to 

					attempt to allocate from.

@param 	aZoneIdCount The number of RAM zone IDs contained in aZoneIdList.

@param	aSize		The size in bytes of the required block. The specified size

					is rounded up to the page size, since only whole pages of

					physical RAM can be allocated.

@param	aPhysAddr	Receives the physical address of the base of the block on

					successful allocation.

@param	aAlign		Specifies the number of least significant bits of the

					physical address which are required to be zero. If a value

					less than log2(page size) is specified, page alignment is

					assumed. Pass 0 for aAlign if there are no special alignment

					constraints (other than page alignment).

@return	KErrNone if the allocation was successful.

		KErrNoMemory if a sufficiently large physically contiguous block of free

		RAM	with the specified alignment could not be found within the specified 

		zone.

		KErrArgument if a RAM zone of a specified ID can't be found or if the

		RAM zones have a total number of physical pages which is less than those 

		requested for the allocation.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::ZoneAllocPhysicalRam(TUint* aZoneIdList, TUint aZoneIdCount, TInt aSize, TPhysAddr& aPhysAddr, TInt aAlign)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL,"Epoc::ZoneAllocPhysicalRam");

	RamAllocLock::Lock();

	TInt r = TheMmu.ZoneAllocPhysicalRam(aZoneIdList, aZoneIdCount, aSize, aPhysAddr, aAlign);

	RamAllocLock::Unlock();

	return r;

	}

/**

Attempt to allocate discontiguous RAM pages.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

@param	aNumPages	The number of discontiguous pages required to be allocated

@param	aPageList	This should be a pointer to a previously allocated array of

					aNumPages TPhysAddr elements.  On a successful allocation it 

					will receive the physical addresses of each page allocated.

@return	KErrNone if the allocation was successful.

		KErrNoMemory if the requested number of pages can't be allocated

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::AllocPhysicalRam(TInt aNumPages, TPhysAddr* aPageList)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL, "Epoc::AllocPhysicalRam");

	RamAllocLock::Lock();

	TInt r = TheMmu.AllocPhysicalRam(aPageList,aNumPages,(Mmu::TRamAllocFlags)EMemAttStronglyOrdered);

	RamAllocLock::Unlock();

	return r;

	}

/**

Attempt to allocate discontiguous RAM pages from the specified zone.

Note that this method only respects the KRamZoneFlagNoAlloc flag and will always attempt

to allocate regardless of whether the other flags are set for the specified RAM zones 

or not.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

@param 	aZoneId		The ID of the zone to attempt to allocate from.

@param	aNumPages	The number of discontiguous pages required to be allocated 

					from the specified zone.

@param	aPageList	This should be a pointer to a previously allocated array of

					aNumPages TPhysAddr elements.  On a successful 

					allocation it will receive the physical addresses of each 

					page allocated.

@return	KErrNone if the allocation was successful.

		KErrNoMemory if the requested number of pages can't be allocated from the 

		specified zone.

		KErrArgument if a RAM zone of the specified ID can't be found or if the

		RAM zone has a total number of physical pages which is less than those 

		requested for the allocation.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::ZoneAllocPhysicalRam(TUint aZoneId, TInt aNumPages, TPhysAddr* aPageList)

	{

	return ZoneAllocPhysicalRam(&aZoneId, 1, aNumPages, aPageList);

	}

/**

Attempt to allocate discontiguous RAM pages from the specified RAM zones.

The RAM pages will be allocated into the RAM zones in the order that they are specified 

in the aZoneIdList parameter, the RAM zone preferences will be ignored.

Note that this method only respects the KRamZoneFlagNoAlloc flag and will always attempt

to allocate regardless of whether the other flags are set for the specified RAM zones 

or not.

When the RAM is no longer required it should be freed using Epoc::FreePhysicalRam().

@param 	aZoneIdList	A pointer to an array of RAM zone IDs of the RAM zones to 

					attempt to allocate from.

@param	aZoneIdCount The number of RAM zone IDs pointed to by aZoneIdList.

@param	aNumPages	The number of discontiguous pages required to be allocated 

					from the specified zone.

@param	aPageList	This should be a pointer to a previously allocated array of

					aNumPages TPhysAddr elements.  On a successful 

					allocation it will receive the physical addresses of each 

					page allocated.

@return	KErrNone if the allocation was successful.

		KErrNoMemory if the requested number of pages can't be allocated from the 

		specified zone.

		KErrArgument if a RAM zone of a specified ID can't be found or if the

		RAM zones have a total number of physical pages which is less than those 

		requested for the allocation.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::ZoneAllocPhysicalRam(TUint* aZoneIdList, TUint aZoneIdCount, TInt aNumPages, TPhysAddr* aPageList)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL, "Epoc::ZoneAllocPhysicalRam");

	RamAllocLock::Lock();

	TInt r = TheMmu.ZoneAllocPhysicalRam(aZoneIdList, aZoneIdCount, aNumPages, aPageList);

	RamAllocLock::Unlock();

	return r;

	}

/**

Free a previously-allocated block of physically contiguous RAM.

Specifying one of the following may cause the system to panic: 

a) an invalid physical RAM address.

b) valid physical RAM addresses where some had not been previously allocated.

c) an address not aligned to a page boundary.

@param	aPhysAddr	The physical address of the base of the block to be freed.

					This must be the address returned by a previous call to

					Epoc::AllocPhysicalRam(), Epoc::ZoneAllocPhysicalRam(), 

					Epoc::ClaimPhysicalRam() or Epoc::ClaimRamZone().

@param	aSize		The size in bytes of the required block. The specified size

					is rounded up to the page size, since only whole pages of

					physical RAM can be allocated.

@return	KErrNone if the operation was successful.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::FreePhysicalRam(TPhysAddr aPhysAddr, TInt aSize)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL,"Epoc::FreePhysicalRam");

	RamAllocLock::Lock();

	TheMmu.FreePhysicalRam(aPhysAddr,MM::RoundToPageCount(aSize));

	RamAllocLock::Unlock();

	return KErrNone;

	}

/**

Free a number of physical RAM pages that were previously allocated using

Epoc::AllocPhysicalRam() or Epoc::ZoneAllocPhysicalRam().

Specifying one of the following may cause the system to panic: 

a) an invalid physical RAM address.

b) valid physical RAM addresses where some had not been previously allocated.

c) an address not aligned to a page boundary.

@param	aNumPages	The number of pages to be freed.

@param	aPageList	An array of aNumPages TPhysAddr elements.  Where each element

					should contain the physical address of each page to be freed.

					This must be the same set of addresses as those returned by a 

					previous call to Epoc::AllocPhysicalRam() or 

					Epoc::ZoneAllocPhysicalRam().

@return	KErrNone if the operation was successful.

@pre Calling thread must be in a critical section.

@pre Interrupts must be enabled.

@pre Kernel must be unlocked.

@pre No fast mutex can be held.

@pre Call in a thread context.

@pre Can be used in a device driver.

*/

EXPORT_C TInt Epoc::FreePhysicalRam(TInt aNumPages, TPhysAddr* aPageList)

	{

	CHECK_PRECONDITIONS(MASK_THREAD_CRITICAL,"Epoc::FreePhysicalRam");

	RamAllocLock::Lock();

	TheMmu.FreePhysicalRam(aPageList,aNumPages);

	RamAllocLock::Unlock();

	return KErrNone;

	}

/**

Allocate a specific block of physically contiguous RAM, specified by physical

base address and size.

If and when the RAM is no longer required it should be freed using

Epoc::FreePhysicalRam()

@param	aPhysAddr	The physical address of the base of the required block.

@param	aSize		The size in bytes of the required block. The specified size

					is rounded up to the page size, since only whole pages of

					physical RAM can be allocated.

@return	KErrNone if the operation was successful.

		KErrArgument if the range of physical addresses specified included some

					which are not valid physical RAM addresses.

		KErrInUse	if the range of physical addresses specified are all valid

					physical RAM addresses but some of them have already been

					allocated for other purposes.

@pre Calling thread must be in a critical section.