rem

rem Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

rem All rights reserved.

rem This component and the accompanying materials are made available

rem under the terms of the License "Eclipse Public License v1.0"

rem which accompanies this distribution, and is available

rem at the URL "http://www.eclipse.org/legal/epl-v10.html".

rem

rem Initial Contributors:

rem Nokia Corporation - initial contribution.

rem

rem Contributors:

rem

rem Description:

rem

rem -------------------------------------------------------------------------------------------------------------------

rem Open 8000 file in each of the directories in D1\D2\D3\D4 to fill the dir cache

rem This is the pre-condition to run all of the test cases below. This covers step#2 in @SYMTestActions in all cases below.

rem Note: It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1361	

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by opening multiple files linearly when DirCache has 1.7MB data

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB in ESTART.TXT

rem				2. Fill DirCache with 1.7MB data

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Open the following files under \\D1\\: 

rem					ABCD~_20

rem					ABCD~_200

rem					ABCD~_1000

rem					ABCD~_3000

rem					ABCD~_4000

rem					ABCD~_6000

rem					ABCD~_8000

rem				4. Measure the time taken to open each of these files

rem		

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB

rem				2. DirCache filled with 1.7MB data

rem				3. File Open Successful

rem				4. Time in ms for each file

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1362	

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by opening multiple files linearly when DirCache has 3.4MB data

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB in ESTART.TXT

rem				2. Fill DirCache with 3.4MB data 

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Open the following files under \\D1\\ D2\\  : 

rem					ABCD~_20

rem					ABCD~_200

rem					ABCD~_1000

rem					ABCD~_3000

rem					ABCD~_4000

rem					ABCD~_6000

rem					ABCD~_8000

rem				4. Measure the time taken to open each of these files

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB

rem				2. DirCache filled with 3.4MB data

rem				3. File Open Successful

rem				4. Time in ms for each file

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1363

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by opening multiple files linearly when DirCache has 5.1MB data	

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB in ESTART.TXT

rem				2. Fill DirCache with 5.1MB data

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Open the following files under \\D1\\ D2\\ D3\\: 

rem					ABCD~_20

rem					ABCD~_200

rem					ABCD~_1000

rem					ABCD~_3000

rem					ABCD~_4000

rem					ABCD~_6000

rem					ABCD~_8000

rem				4. Measure the  time taken to open each of these files

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB

rem				2. DirCache filled with 5.1MB data

rem				3. File Open Successful

rem				4. Time in ms for each file

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1364	

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by opening multiple files linearly when DirCache has 6.8MB data	

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB in ESTART.TXT

rem				2. Fill DirCache with 6.8MB data

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Open the following files under \\D1\\ D2\\ D3\\ D4\\ : 

rem					ABCD~_20

rem					ABCD~_200

rem					ABCD~_1000

rem					ABCD~_3000

rem					ABCD~_4000

rem					ABCD~_6000

rem					ABCD~_8000

rem				4. Measure the  time taken to open each of these files

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  =  128 KB and FAT_MaxDirCacheSize  = 9216 KB

rem				2. DirCache filled with 6.8MB data

rem				3. File Open Successful

rem				4. Time in ms for each file

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0