rem

rem Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

rem All rights reserved.

rem This component and the accompanying materials are made available

rem under the terms of the License "Eclipse Public License v1.0"

rem which accompanies this distribution, and is available

rem at the URL "http://www.eclipse.org/legal/epl-v10.html".

rem

rem Initial Contributors:

rem Nokia Corporation - initial contribution.

rem

rem Contributors:

rem

rem Description:

rem

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1375	

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by opening multiple files linearly when 6.8MB data is used with 2MB DirCache 

rem				(i.e Partially Cached - 30% of data cached)

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  = 128 KB  and  FAT_MaxDirCacheSize  = 2048 KB  in ESTART.TXT

rem				2. Try to fill DirCache with 6.8 MB data

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Open the following files under \\D1\\D2\\D3\\D4\\

rem					ABCD~_20

rem					ABCD~_200

rem					ABCD~_1000

rem					ABCD~_3000

rem					ABCD~_4000

rem					ABCD~_6000

rem					ABCD~_8000

rem				4. Measure the  time taken to open each of these files

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  = 128 KB  and  FAT_MaxDirCacheSize  = 2048 KB  

rem				2. DirCache filled with 2MB data only

rem				3. File Open Successful

rem				4. Time in ms for each file

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1376	

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by opening multiple files randomly when 6.8MB data is used with 2MB DirCache 

rem				(i.e Partially Cached - 30% of data cached)

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  = 128 KB  and  FAT_MaxDirCacheSize  =  2048 KB  in ESTART.TXT

rem				2. Try to fill DirCache with 8 MB data

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Open the following files under \\D1\\D2\\D3\\D4\\

rem					ABCD~_8000

rem					ABCD~_20

rem					ABCD~_4000

rem					ABCD~_1000

rem					ABCD~_3000

rem					ABCD~_200

rem					ABCD~_6000

rem				4. Measure the  time taken to open each of these files

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  = 128 KB  and  FAT_MaxDirCacheSize  =  2048 KB  

rem				2. DirCache filled with 2MB data only

rem				3. File Open Successful

rem				4. Time in ms for each file

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0

rem -------------------------------------------------------------------------------------------------------------------

rem @SYMTestCaseID 		PBASE-FAT-PERF-1377	

rem @SYMTestType    		PT	

rem @SYMPREQ			PREQ1885

rem @SYMTestCaseDesc		To check the directory cache performance by creating a file when 6.8MB data is used with 2MB DirCache

rem				(i.e Partially Cached - 30% of data cached)

rem @SYMTestActions		0. Make sure the Test pre-settings

rem				1. Set FAT_MinDirCacheSize  =  128 KB  and  FAT_MaxDirCacheSize  = 2048 KB in ESTART.TXT

rem				2. Try to fill DirCache with 6.8MB data

rem				   Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.

rem				   This should not be accounted for measurement purpose.

rem				3. Create  FILE_2.TXT in \\D1\\D2\\D3\\D4\\

rem				4. Measure the time taken to create a file

rem @SYMTestExpectedResults	1. FAT_MinDirCacheSize  =  128 KB  and  FAT_MaxDirCacheSize  = 2048 KB

rem				2. DirCache filled with 2MB data only

rem				3. Files Creation Successful

rem				4. Time in ms

rem Note:			It is assumed that memory card is mounted on e: drive on the target board

rem -------------------------------------------------------------------------------------------------------------------

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1

t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0

t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0

t_fat_perf e -c Create -p D1\D2\D3\D4 -b FILE_2 -n 1 -m 0

rem ---Cleanup------------------------------------------------------------------------------------

rem ---Do not consider this for performance measurement

t_fat_perf e -c Delete -p D1\D2\D3\D4 -b FILE_2 -n 1 -m 0