// Copyright (c) 2008-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// Hardware Configuration Respoitory Platform Independent Layer (PIL)

//

/** 

@file hcr.h

@publishedPartner

@prototype

*/

#ifndef HCR_H

#define HCR_H

// -- INCLUDES ----------------------------------------------------------------

#include <e32err.h>

#include <e32def.h> 

#include <e32cmn.h> 

#include <e32des8.h>

// -- CLASSES -----------------------------------------------------------------

/**

The HCR namespace contains all the types and APIs that make up the

Kernel side Hardware Configuration Repository (HCR).

It provides accessor functions to settings held by the HCR and may be used by 

kernel side clients such as physical device drivers and other services from

thread contexts.

The published Setting IDs available for use with this API can be found

in the BSP exported header 'hcrconfig.h'. This provides the top-level header

that clients can include to gain access to all IDs for the BSP.

*/

namespace HCR

    {

    /** Maximum length of a large setting type, in bytes */     

    static const TInt KMaxSettingLength = 512;

    /** Setting category identifier type */

    typedef TUint32 TCategoryUid;

    /** Setting element identifier type */

    typedef TUint32 TElementId;

    /** The setting Identifier structure. Used to create static initialised

    arrys for use with multiple setting retrieval calls.	

	*/    

    struct SSettingId

	    {

        TCategoryUid iCat;		//!< Allocated UID for setting category

        TElementId iKey;		//!< Element indetifier for setting in category

		};

    /** The setting Identifier type. A class used to uniquely identify a 

    setting in the HCR. Used in calls to HCR API. 

	*/

    	{

    public:

    	TSettingId ()

		 { iCat = iKey = 0; };

    	TSettingId (TCategoryUid aCat, TElementId aKey)

    	 { iCat = aCat; iKey = aKey; };

    	TSettingId (const SSettingId& aId)

    	 { iCat = aId.iCat; iKey = aId.iKey; };

		TSettingId& operator= (const SSettingId& rhs)

    	};

    /** The setting types supported. The types are shown in two groups: Word 

    size - a maximum of 4 bytes; and ii) Large size - types exceeding 4 bytes 

    in size.

	*/

    enum TSettingType

    	{

        ETypeUndefined  = 0,            //!< Type unknown/not set

        // Word size settings

        ETypeInt32      = 0x00000001,   //!< 32bit signed integer

        ETypeInt16      = 0x00000002,   //!< 16bit signed integer

        ETypeInt8       = 0x00000004,   //!< 8bit signed integer

        ETypeBool       = 0x00000008,   //!< 32bit boolean value

        ETypeUInt32     = 0x00000010,   //!< 32bit unsigned integer

        ETypeUInt16     = 0x00000020,   //!< 16bit unsigned integer

        ETypeUInt8      = 0x00000040,   //!< 8bit unsigned integer

        ETypeLinAddr    = 0x00000100,   //!< 32bit virtual address

        // Large settings

        ETypeBinData   		= 0x00010000,   //!< Raw binary data (TUint8 array)

        ETypeText8     		= 0x00020000,   //!< String data (TText8 array) 

		ETypeArrayInt32 	= 0x00040000,	//!< 32bit signed integer array   

		ETypeArrayUInt32	= 0x00080000,	//!< 32bit unsigned integer array

        ETypeInt64     		= 0x01000000,   //!< 64bit signed integer

        ETypeUInt64    		= 0x02000000,   //!< 64bit unsigned integer    

     	};

	/**

    Retrieve settings of built in types from the HCR.

    @param aId     The setting identifier

    @param aValue  The retrieved setting data value  

	@return	KErrNone if successful, output parameters valid

            KErrNotFound if aId is not a known setting ID

            KErrArgument if the setting identified is not the correct type

            KErrNotReady if the HCR is used before it has been initialised

            KErrCorrupt if HCR finds a repository to be corrupt

            KErrGeneral if an internal failure occurs, see trace.

	@pre    Call from thread context, during Init1 or later

	*/

	IMPORT_C TInt GetInt(const TSettingId& aId, TInt8& aValue);

	IMPORT_C TInt GetInt(const TSettingId& aId, TInt16& aValue);

	IMPORT_C TInt GetInt(const TSettingId& aId, TInt32& aValue);

    IMPORT_C TInt GetInt(const TSettingId& aId, TInt64& aValue);

	IMPORT_C TInt GetBool(const TSettingId& aId, TBool& aValue);

	IMPORT_C TInt GetUInt(const TSettingId& aId, TUint8& aValue);

    IMPORT_C TInt GetUInt(const TSettingId& aId, TUint16& aValue);

    IMPORT_C TInt GetUInt(const TSettingId& aId, TUint32& aValue);

    IMPORT_C TInt GetUInt(const TSettingId& aId, TUint64& aValue);

    IMPORT_C TInt GetLinAddr(const TSettingId& aId, TLinAddr& aValue);

	/**

    Retrieve a binary data (ETypeBinData) setting from the HCR.

    @param aId     The setting identifier

    @param aMaxLen The maximum value length that can be stored in the buffer

    @param aValue  A pointer to the buffer or a descriptor to hold the value

    @param aLen    Contains the length of the setting value written

	@return	KErrNone if successful and aValue has been set

            KErrNotFound if aId is not a known setting ID

            KErrArgument if the setting identified is not the correct type

            KErrNotReady if the HCR is used before it has been initialised

            KErrCorrupt if HCR finds a repository to be corrupt

            KErrTooBig if the setting is larger than the supplied buffer

            KErrGeneral if an internal failure occurs, see trace

	@pre    Call from thread context, during Init1 or later

	*/

    IMPORT_C TInt GetData(const TSettingId& aId, TDes8& aValue);

    IMPORT_C TInt GetData(const TSettingId& aId, TUint16 aMaxLen, 

                                    TUint8* aValue, TUint16& aLen);        

	/**

    Retrieve a character string (ETypeText8) setting from the HCR.

    @param aId     The setting identifier

    @param aMaxLen The maximum value length that can be stored in the buffer

    @param aValue  A pointer to the buffer or a descriptor to hold the value

	@param aLen    Contains the length of the setting value written    

	@return	KErrNone if successful and aValue has been set

            KErrNotFound if aId is not a known setting ID

            KErrArgument if the setting identified is not the correct type

            KErrNotReady if the HCR is used before it has been initialised

            KErrCorrupt if HCR finds a repository to be corrupt

            KErrTooBig if the setting is larger than the supplied buffer

            KErrGeneral if an internal failure occurs, see trace

	@pre    Call from thread context, during Init1 or later

	*/

    IMPORT_C TInt GetString(const TSettingId& aId, TDes8& aValue);

    IMPORT_C TInt GetString(const TSettingId& aId, TUint16 aMaxLen, 

                                    TText8* aValue, TUint16& aLen);

	/**

    Retrieve an array setting from the HCR. All value length paramters are 

	measured in bytes.

    @param aId     The setting identifier

    @param aMaxLen The maximum value length that can be stored in the buffer

    @param aValue  A pointer to the buffer to hold the value

    @param aLen    Contains the length of the setting value written

	@return	KErrNone if successful and aValue has been set

            KErrNotFound if aId is not a known setting ID

            KErrArgument if the setting identified is not the correct type

            KErrNotReady if the HCR is used before it has been initialised

            KErrCorrupt if HCR finds a repository to be corrupt

            KErrTooBig if the setting is larger than the supplied buffer

            KErrGeneral if an internal failure occurs, see trace

	@pre    Call from thread context, during Init1 or later

	*/

    IMPORT_C TInt GetArray(const TSettingId& aId, TUint16 aMaxLen, 

                                    TInt32* aValue, TUint16& aLen);        

    IMPORT_C TInt GetArray(const TSettingId& aId, TUint16 aMaxLen, 

                                    TUint32* aValue, TUint16& aLen);   

    /**

    Retrieve multiple simple settings from the Hardware Configuration 

    Repository in one call. This method can be used for all settings of size 4 

    @param aNum     in: The number of settings to retrieve. It is also the 

                    size of the arrays in the following arguments

    @param aIds     in:  An ordered array of setting identifiers to retrieve, lowest first

    @param aValues  out: An array of values, populated on exit

    @param aTypes   out: An optional array of type enumerations describing 

                    the type of each setting found. May be 0 if client is 

                    not interested

	@pre    Call from thread context, during Init1 or later

    IMPORT_C TInt GetWordSettings(TInt aNum, const SSettingId aIds[], 

    /**

    Retrieve the type and size of a HCR setting. Can be used by clients to 

    obtain the setting size if a dynamic buffer is to be used.

    @param aId     The setting identifier

    @param aType   The type enumeration of found setting

    @param aLen    The length in bytes of found setting

	@return	KErrNone if successful, output parameters valid

            KErrNotFound if aId is not a known setting ID

            KErrNotReady if the HCR is used before it has been initialised

            KErrCorrupt if HCR finds a repository to be corrupt

            KErrGeneral if an internal failure occurs, see trace

	@pre    Call from thread context, during Init1 or later

    */    

    IMPORT_C TInt GetTypeAndSize(const TSettingId& aId, 

                                        TSettingType& aType, TUint16& aLen);

    /**

    Retrieve the number of settings held in the HCR for one particular category.

	It allows a client to perpare buffers for other calls to the HCR to 

	retrieve these settings.

	This search method will return the total number of setting records found 

	across all HCR repositories for a given category. It does not apply the 

	override rules of other routines meaning that it counts duplicates to

	maintain performance.

    @param aCatUid	in: The setting identifier category to use in the search

	@return	Zero or positive number of settings found in category, -ve on error

            KErrNotReady if the HCR is used before it has been initialised

            KErrCorrupt if HCR finds a repository to be corrupt

            KErrGeneral if an internal failure occurs, see trace

	@pre    Call from thread context, during Init1 or later

    */ 

	IMPORT_C TInt FindNumSettingsInCategory (TCategoryUid aCatUid);

    Retrieve all the setting ids, types and sizes in one particular

	category. Can be used by clients to obtain the number, size and types of 

	all the settings in a category. It allows a client to alloc buffers for 

    @param aCatUid	 in: The setting identifier category to use in the search

    @param aMaxNum   in: The maximum number of settings to return. It is also 

						    enough to hold all elements in category.

    @param aTypes	 inout: Client supplied array populated with setting types 

						    enumerations on exit. May be 0 if client is 

                            not interested.

						    on exit. May be 0 if client is not interested.

	@return	Zero or positive number of settings found in category, -ve on error

			KErrNotReady if the HCR is used before it has been initialised

	@pre    Call from thread context, during Init1 or later

    */ 

    /** 

    Finds multiple settings in the Hardware Configuration Repository who's

    setting ID matches the supplied search bit pattern. This method is useful 

    for categories that contain structured settings i.e. row/column structured 

    or record based categories as might be the case with hardware service

    providers.

    The caller supplies the category to search, an element ID mask and the 

    pattern to match. SettingIDs that satisfy this logic are returned:

    ((elementID & aElementMask) == (aPattern & aElementMask))

    For example, a set of driver capability structures might be encoded into

    an element ID where the 24 MSb are the row/record number and the 8 LSb 

    are the column/field index. Thus to retrieve all fields in row 2 supply: 

        aElemMask = 0xffffff00, aPattern = 0x000002** 

    to retrieve key fields of all records supply:

        aElemMask = 0x000000ff, aPattern = 0x******01

    (* = dont care)

    @param aCat      in: The category to retrieve settings for

    @param aMaxNum   in: The maximum number of settings to retrieve. It is also 

                         the size of the arrays in the following arguments   

						    enough to hold aMaxNum element ids.

    @param aTypes    inout: Client supplied array populated with setting types 

						    enumerations on exit. May be 0 if client is 

                            not interested.

    @param aLen  	 inout: Client supplied array populated with setting lengths

						    on exit. May be 0 if client is not interested.

	@return	Zero or positive number of settings found in category, -ve on error

            KErrNotReady if the HCR is used before it has been initialised

	@pre    Call from thread context, during Init1 or later

	*/    

}

#endif // HCR_H