kernel/eka/drivers/usbcc/misc.cpp
changeset 0 a41df078684a
child 43 c1f20ce4abcf
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/kernel/eka/drivers/usbcc/misc.cpp	Mon Oct 19 15:55:17 2009 +0100
@@ -0,0 +1,413 @@
+// Copyright (c) 2000-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of the License "Eclipse Public License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.eclipse.org/legal/epl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+// e32/drivers/usbcc/misc.cpp
+// Platform independent layer (PIL) of the USB Device controller driver:
+// Implementations of misc. classes defined in usbc.h.
+// 
+//
+
+/**
+ @file misc.cpp
+ @internalTechnology
+*/
+
+#include <drivers/usbc.h>
+
+
+/** Helper function for logical endpoints and endpoint descriptors:
+	Split single Ep size into separate FS/HS sizes.
+	This function modifies its arguments.
+ */
+TInt TUsbcEndpointInfo::AdjustEpSizes(TInt& aEpSize_Fs, TInt& aEpSize_Hs) const
+	{
+	if (iType == KUsbEpTypeBulk)
+		{
+		// FS: [8|16|32|64] HS: 512
+		if (iSize < 64)
+			{
+			aEpSize_Fs = iSize;
+			}
+		else
+			{
+			aEpSize_Fs = 64;
+			}
+		aEpSize_Hs = 512;
+		}
+	else if (iType == KUsbEpTypeInterrupt)
+		{
+		// FS: [0..64] HS: [0..1024]
+		if (iSize < 64)
+			{
+			aEpSize_Fs = iSize;
+			}
+		else
+			{
+			aEpSize_Fs = 64;
+			}
+		aEpSize_Hs = iSize;
+		}
+	else if (iType == KUsbEpTypeIsochronous)
+		{
+		// FS: [0..1023] HS: [0..1024]
+		if (iSize < 1023)
+			{
+			aEpSize_Fs = iSize;
+			}
+		else
+			{
+			aEpSize_Fs = 1023;
+			}
+		aEpSize_Hs = iSize;
+		}
+	else if (iType == KUsbEpTypeControl)
+		{
+		// FS: [8|16|32|64] HS: 64
+		if (iSize < 64)
+			{
+			aEpSize_Fs = iSize;
+			}
+		else
+			{
+			aEpSize_Fs = 64;
+			}
+		aEpSize_Hs = 64;
+		}
+	else
+		{
+		aEpSize_Fs = aEpSize_Hs = 0;
+		return KErrGeneral;
+		}
+
+	// For the reason of the following checks see Table 9-14. "Allowed wMaxPacketSize
+	// Values for Different Numbers of Transactions per Microframe".
+	if ((iType == KUsbEpTypeInterrupt) || (iType == KUsbEpTypeIsochronous))
+		{
+		if (iTransactions == 1)
+			{
+			if (aEpSize_Hs < 513)
+				{
+				__KTRACE_OPT(KPANIC, Kern::Printf("  Warning: Ep size too small: %d < 513. Correcting...",
+												  aEpSize_Hs));
+				aEpSize_Hs = 513;
+				}
+			}
+		else if (iTransactions == 2)
+			{
+			if (aEpSize_Hs < 683)
+				{
+				__KTRACE_OPT(KPANIC, Kern::Printf("  Warning: Ep size too small: %d < 683. Correcting...",
+												  aEpSize_Hs));
+				aEpSize_Hs = 683;
+				}
+			}
+		}
+	return KErrNone;
+	}
+
+
+/** Helper function for logical endpoints and endpoint descriptors:
+	If not set, assign a valid and meaningful value to iInterval_Hs, deriving from iInterval.
+	This function modifies the objects's data member(s).
+ */
+TInt TUsbcEndpointInfo::AdjustPollInterval()
+	{
+	if (iInterval_Hs != -1)
+		{
+		// Already done.
+		return KErrNone;
+		}
+	if ((iType == KUsbEpTypeBulk) || (iType == KUsbEpTypeControl))
+		{
+		// Valid range: 0..255 (maximum NAK rate).
+		// (The host controller will probably ignore this value though -
+		//  see the last sentence of section 9.6.6 for details.)
+		iInterval_Hs = 255;
+		}
+	else if (iType == KUsbEpTypeInterrupt)
+		{
+		// HS interval = 2^(iInterval_Hs-1) with a valid iInterval_Hs range of 1..16.
+		// The following table shows the mapping of HS values to actual intervals (and
+		// thus FS values) for the range of possible FS values (1..255).
+		// There is not always a 1:1 mapping possible, but we want at least to make sure
+		// that the HS polling interval is never longer than the FS one (except for 255).
+		//
+		// 1 = 1
+		// 2 = 2
+		// 3 = 4
+		// 4 = 8
+		// 5 = 16
+		// 6 = 32
+		// 7 = 64
+		// 8 = 128
+		// 9 = 256
+		if (iInterval == 255)
+			iInterval_Hs = 9;
+		else if (iInterval >= 128)
+			iInterval_Hs = 8;
+		else if (iInterval >= 64)
+			iInterval_Hs = 7;
+		else if (iInterval >= 32)
+			iInterval_Hs = 6;
+		else if (iInterval >= 16)
+			iInterval_Hs = 5;
+		else if (iInterval >= 8)
+			iInterval_Hs = 4;
+		else if (iInterval >= 4)
+			iInterval_Hs = 3;
+		else if (iInterval >= 2)
+			iInterval_Hs = 2;
+		else if (iInterval == 1)
+			iInterval_Hs = 1;
+		else
+			{
+			// iInterval wasn't set properly by the user
+			iInterval_Hs = 1;
+			return KErrGeneral;
+			}
+		}
+	else if (iType == KUsbEpTypeIsochronous)
+		{
+		// Interpretation is the same for FS and HS.
+		iInterval_Hs = iInterval;
+		}
+	else
+		{
+		// '1' is a valid value for all endpoint types...
+		iInterval_Hs = 1;
+		return KErrGeneral;
+		}
+	return KErrNone;
+	}
+
+
+TUsbcPhysicalEndpoint::TUsbcPhysicalEndpoint()
+	: iEndpointAddr(0), iIfcNumber(NULL), iLEndpoint(NULL), iSettingReserve(EFalse), iHalt(EFalse)
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcPhysicalEndpoint::TUsbcPhysicalEndpoint"));
+	}
+
+
+TInt TUsbcPhysicalEndpoint::TypeAvailable(TUint aType) const
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcPhysicalEndpoint::TypeAvailable"));
+	switch (aType)
+		{
+	case KUsbEpTypeControl:
+		return (iCaps.iTypesAndDir & KUsbEpTypeControl);
+	case KUsbEpTypeIsochronous:
+		return (iCaps.iTypesAndDir & KUsbEpTypeIsochronous);
+	case KUsbEpTypeBulk:
+		return (iCaps.iTypesAndDir & KUsbEpTypeBulk);
+	case KUsbEpTypeInterrupt:
+		return (iCaps.iTypesAndDir & KUsbEpTypeInterrupt);
+	default:
+		__KTRACE_OPT(KPANIC, Kern::Printf("  Error: invalid EP type: %d", aType));
+		return 0;
+		}
+	}
+
+
+TInt TUsbcPhysicalEndpoint::DirAvailable(TUint aDir) const
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcPhysicalEndpoint::DirAvailable"));
+	switch (aDir)
+		{
+	case KUsbEpDirIn:
+		return (iCaps.iTypesAndDir & KUsbEpDirIn);
+	case KUsbEpDirOut:
+		return (iCaps.iTypesAndDir & KUsbEpDirOut);
+	default:
+		__KTRACE_OPT(KPANIC, Kern::Printf("  Error: invalid EP direction: %d", aDir));
+		return 0;
+		}
+	}
+
+
+TInt TUsbcPhysicalEndpoint::EndpointSuitable(const TUsbcEndpointInfo* aEpInfo, TInt aIfcNumber) const
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcPhysicalEndpoint::EndpointSuitable"));
+	__KTRACE_OPT(KUSB, Kern::Printf("  looking for EP: type=0x%x dir=0x%x size=%d (ifc_num=%d)",
+									aEpInfo->iType, aEpInfo->iDir, aEpInfo->iSize, aIfcNumber));
+	if (iSettingReserve)
+		{
+		__KTRACE_OPT(KUSB, Kern::Printf("  -> setting conflict"));
+		return 0;
+		}
+	// (aIfcNumber == -1) means the ep is for a new default interface setting
+	else if (iIfcNumber && (*iIfcNumber != aIfcNumber))
+		{
+		// If this endpoint has already been claimed (iIfcNumber != NULL),
+		// but by a different interface(-set) than the currently looking one
+		// (*iIfcNumber != aIfcNumber), then it's not available.
+		// This works because we can assign the same physical endpoint
+		// to different alternate settings of the *same* interface, and
+		// because we check for available endpoints for every alternate setting
+		// as a whole.
+		__KTRACE_OPT(KUSB, Kern::Printf("  -> ifc conflict"));
+		return 0;
+		}
+	else if (!TypeAvailable(aEpInfo->iType))
+		{
+		__KTRACE_OPT(KUSB, Kern::Printf("  -> type conflict"));
+		return 0;
+		}
+	else if (!DirAvailable(aEpInfo->iDir))
+		{
+		__KTRACE_OPT(KUSB, Kern::Printf("  -> direction conflict"));
+		return 0;
+		}
+	else if (!(iCaps.iSizes & PacketSize2Mask(aEpInfo->iSize)) && !(iCaps.iSizes & KUsbEpSizeCont))
+		{
+		__KTRACE_OPT(KUSB, Kern::Printf("  -> size conflict"));
+		return 0;
+		}
+	else
+		return 1;
+	}
+
+
+TUsbcPhysicalEndpoint::~TUsbcPhysicalEndpoint()
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcPhysicalEndpoint::~TUsbcPhysicalEndpoint()"));
+	iLEndpoint = NULL;
+	}
+
+
+TUsbcLogicalEndpoint::TUsbcLogicalEndpoint(DUsbClientController* aController, TUint aEndpointNum,
+										   const TUsbcEndpointInfo& aEpInfo, TUsbcInterface* aInterface,
+										   TUsbcPhysicalEndpoint* aPEndpoint)
+	: iController(aController), iLEndpointNum(aEndpointNum), iInfo(aEpInfo), iInterface(aInterface),
+	  iPEndpoint(aPEndpoint)
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcLogicalEndpoint::TUsbcLogicalEndpoint()"));
+	//  Adjust FS/HS endpoint sizes
+	if (iInfo.AdjustEpSizes(iEpSize_Fs, iEpSize_Hs) != KErrNone)
+		{
+		__KTRACE_OPT(KPANIC, Kern::Printf("  Error: Unknown endpoint type: %d", iInfo.iType));
+		}
+	__KTRACE_OPT(KUSB, Kern::Printf("  Now set: iEpSize_Fs=%d iEpSize_Hs=%d (iInfo.iSize=%d)",
+									iEpSize_Fs, iEpSize_Hs, iInfo.iSize));
+	//  Adjust HS polling interval
+	if (iInfo.AdjustPollInterval() != KErrNone)
+		{
+		__KTRACE_OPT(KPANIC, Kern::Printf("  Error: Unknown ep type (%d) or invalid interval value (%d)",
+										  iInfo.iType, iInfo.iInterval));
+		}
+	__KTRACE_OPT(KUSB, Kern::Printf("  Now set: iInfo.iInterval=%d iInfo.iInterval_Hs=%d",
+									iInfo.iInterval, iInfo.iInterval_Hs));
+	// Additional transactions requested on a non High Bandwidth ep?
+	if ((iInfo.iTransactions > 0) && !aPEndpoint->iCaps.iHighBandwidth)
+		{
+		__KTRACE_OPT(KPANIC,
+					 Kern::Printf("  Warning: Additional transactions requested but not a High Bandwidth ep"));
+		}
+	}
+
+
+TUsbcLogicalEndpoint::~TUsbcLogicalEndpoint()
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcLogicalEndpoint::~TUsbcLogicalEndpoint: #%d", iLEndpointNum));
+	// If the real endpoint this endpoint points to is also used by
+	// any other logical endpoint in any other setting of this interface
+	// then we leave the real endpoint marked as used. Otherwise we mark
+	// it as available (set its ifc number pointer to NULL).
+	const TInt n = iInterface->iInterfaceSet->iInterfaces.Count();
+	for (TInt i = 0; i < n; ++i)
+		{
+		const TUsbcInterface* const ifc = iInterface->iInterfaceSet->iInterfaces[i];
+		const TInt m = ifc->iEndpoints.Count();
+		for (TInt j = 0; j < m; ++j)
+			{
+			const TUsbcLogicalEndpoint* const ep = ifc->iEndpoints[j];
+			if ((ep->iPEndpoint == iPEndpoint) && (ep != this))
+				{
+				__KTRACE_OPT(KUSB, Kern::Printf("  Physical endpoint still in use -> we leave it as is"));
+				return;
+				}
+			}
+		}
+	__KTRACE_OPT(KUSB, Kern::Printf("  Closing DMA channel"));
+	const TInt idx = iController->EpAddr2Idx(iPEndpoint->iEndpointAddr);
+	// If the endpoint doesn't support DMA (now or ever) the next operation will be a no-op.
+	iController->CloseDmaChannel(idx);
+	__KTRACE_OPT(KUSB, Kern::Printf("  Setting physical ep 0x%02x ifc number to NULL (was %d)",
+									iPEndpoint->iEndpointAddr, *iPEndpoint->iIfcNumber));
+	iPEndpoint->iIfcNumber = NULL;
+	}
+
+
+TUsbcInterface::TUsbcInterface(TUsbcInterfaceSet* aIfcSet, TUint8 aSetting, TBool aNoEp0Requests)
+	: iEndpoints(2), iInterfaceSet(aIfcSet), iSettingCode(aSetting), iNoEp0Requests(aNoEp0Requests)
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcInterface::TUsbcInterface()"));
+	}
+
+
+TUsbcInterface::~TUsbcInterface()
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcInterface::~TUsbcInterface()"));
+	iEndpoints.ResetAndDestroy();
+	}
+
+
+TUsbcInterfaceSet::TUsbcInterfaceSet(const DBase* aClientId, TUint8 aIfcNum)
+	: iInterfaces(2), iClientId(aClientId), iInterfaceNumber(aIfcNum), iCurrentInterface(0)
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcInterfaceSet::TUsbcInterfaceSet()"));
+	}
+
+
+TUsbcInterfaceSet::~TUsbcInterfaceSet()
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcInterfaceSet::~TUsbcInterfaceSet()"));
+	iInterfaces.ResetAndDestroy();
+	}
+
+
+TUsbcConfiguration::TUsbcConfiguration(TUint8 aConfigVal)
+	: iInterfaceSets(1), iConfigValue(aConfigVal)			// iInterfaceSets(1): granularity
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcConfiguration::TUsbcConfiguration()"));
+	}
+
+
+TUsbcConfiguration::~TUsbcConfiguration()
+	{
+	__KTRACE_OPT(KUSB, Kern::Printf("TUsbcConfiguration::~TUsbcConfiguration()"));
+	iInterfaceSets.ResetAndDestroy();
+	}
+
+
+_LIT(KDriverName, "Usbcc");
+
+DUsbcPowerHandler::DUsbcPowerHandler(DUsbClientController* aController)
+	: DPowerHandler(KDriverName), iController(aController)
+	{}
+
+
+void DUsbcPowerHandler::PowerUp()
+	{
+	if (iController)
+		iController->iPowerUpDfc.Enque();
+	}
+
+
+void DUsbcPowerHandler::PowerDown(TPowerState)
+	{
+	if (iController)
+		iController->iPowerDownDfc.Enque();
+	}
+
+
+// -eof-