baseapitest/basesvs/validation/f32/sfsrv/scripts/PBASE-F32-DUAL-DRIVE-Publicapi-RAM.script
//
// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
//
//! @file
//! @SYMTestSuiteName PBASE-F32-DUAL-DRIVE-Publicapi-RAM.script
//! @SYMScriptTestEnvironment This test script requires a base ROM.
/////////////////////////////////////////////////////////////////////////////////////////////////////
//The device has to support Dual drive feature for single interface. The drive info has to be changed
//in dual_drive_env.ini before running the tests on the device which supports DUAL Drive with same interface.
//Example two MMC drives or two NAND drives etc.
/////////////////////////////////////////////////////////////////////////////////////////////////////
LOAD_SUITE T_Sfsrv
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0001
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0001
//! @SYMAPI RFs::MkDirAll();TEntry::IsDir();RFs::RmDir()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Try creating directory on both the drives and also check whether it has been created or not.
//! And finally remove the directory created.
//!
//! @SYMTestActions 1. Create RFs instance.
//! 2. Call RFs::MkDirAll() to create the directories.
//! 3. Check the directory created using TEntry()
//! 4. Remove the directory created.
//! 5. Perform the above operation on both the drives concurrently
//!
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Creates the directories on to both the drives concurrently.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT TEntry tEntry1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll_drive1
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll2_drive1
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll3_drive1
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll4_drive1
COMMAND tEntry1 new
COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry_drive1
COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry2_drive1
COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry3_drive1
COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry4_drive1
COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
COMMAND tEntry1 ~
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir2_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir3_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir4_drive1
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT TEntry tEntry2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll_drive2
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll2_drive2
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll3_drive2
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll4_drive2
COMMAND tEntry2 new
COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry_drive2
COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry2_drive2
COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry3_drive2
COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
COMMAND rfs2 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry4_drive2
COMMAND tEntry2 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive2
COMMAND tEntry2 ~
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir_drive2
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir2_drive2
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir3_drive2
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir4_drive2
COMMAND rfs2 Close
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0001
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0002
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0002
//! @SYMAPI CFileMan::Attribs();CFileMan::Copy();Rfs::Att()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Copy files on to both the drives from system drive concurrenlty
//!
//! @SYMTestActions 1. Call Copy() to copy files on to the mmc drives.
//! 2. Set and Get the attribute of the file.
//! 3. Delete the file copied on to the drive.
//! 4. Perform above operation on both the drive concurrently.
//!
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults copying files on to both drives concurrently works successfully.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND file1 new
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0005_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy_drive1
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open2_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy2_drive1
COMMAND rfs1 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive1
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs1_drive1
COMMAND rfs1 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att2_drive1
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs2_drive1
COMMAND rfs1 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive1
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete_drive1
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete2_drive1
COMMAND fileMan1 ~
COMMAND file1 Close
COMMAND file1 ~
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0005_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy_drive2
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open2_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy2_drive2
COMMAND rfs2 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive2
COMMAND fileMan2 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs1_drive2
COMMAND rfs2 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att2_drive2
COMMAND fileMan2 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs2_drive2
COMMAND rfs2 Att PBASE-F32-DualDrive-Publicapi-RAM-0005_Att1_drive2
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete_drive2
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete2_drive2
COMMAND fileMan2 ~
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Close
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0002
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0003
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0003
//! @SYMAPI RFile::Replace();RFile::Read();RFile::Write()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc create a file on to the both the drive, write and read the content of file and delete the file after the operation.
//! Uses API elements: Open().
//! @SYMTestActions 1. Create RFs session
//! 2. Open the files
//! 3. Write the contents on to the file.
//! 4. Close files.
//! 5. Open file the files.
//! 6. Read the content of the filess.
//! 7. Close file.
//! 8. Delete files.
//! 9. Perform the above operation on both the drives concurrently
//!
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Can perform both read and write opearation on both the drives concurrently
//!
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND file1 new
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive1
COMMAND file1 Close
COMMAND file1 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive1
COMMAND file1 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive1
COMMAND file1 Close
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive1
COMMAND file1 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive1
COMMAND file1 Close
COMMAND file1 ~
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive1
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
COMMAND file2 Close
COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0003
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0004
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0004
//! @SYMAPI CFileMan::Rename()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Rename the files on the mmc drives.
//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
//! 3.Call CFileMan::Rename() to rename the file in one drive with different name.
//! 4.Call CFileMan::Rename() to rename the file in second drive with different name.
//! 5.Delete the renamed file.
//! 6.Close the Rfs session.
//! 7.Perform the above operation on both the drives concurrently
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Files get renamed on both the drives.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND file1 new
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0009_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0009_Copy_drive1
COMMAND fileMan1 Rename PBASE-F32-DualDrive-Publicapi-RAM-0009_Rename_drive1
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive1
COMMAND file1 Close
COMMAND fileMan1 ~
COMMAND file1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0009_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0009_Copy_drive2
COMMAND fileMan2 Rename PBASE-F32-DualDrive-Publicapi-RAM-0009_Rename_drive2
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0009_Open_drive2
COMMAND file2 Close
COMMAND fileMan2 ~
COMMAND file2 ~
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0004
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0005
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0005
//! @SYMAPI CFileMan:Move()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Move the files between the two drives
//!
//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
//! 3.Call CFileMan::Move() to move the file from drive1 to drive2.
//! 4.Call CFileMan::Move(), to move the file from drive2 to drive2.
//! 5.Delete the moved files.
//! 6 Delete the directory in which the file is moved.
//! @SYMTestPriority High
//! @SYMTestExpectedResults Files are moved across the drives..
//! @SYMTestType CIT
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0010_MkDir_drive1
COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0010_MkDir_drive2
COMMAND file1 new
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0010_NewL_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0010_Move_drive1
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0010_Open_drive1
COMMAND file1 Close
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0010_Move_drive2
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0010_Open_drive2
COMMAND file1 Close
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0010_Attribs_drive1
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0010_Attribs_drive2
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0010_Delete_drive1
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0010_Delete_drive2
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0010_RmDir_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0010_RmDir_drive2
COMMAND fileMan1 ~
COMMAND file1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0005
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0006
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0006
//! @SYMAPI CFileMan:Move()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 02/07/2008
//! @SYMTestCaseDesc Move the files from system drive to dual drive and back in to systemdrive CONCURRENTly.
//!
//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
//! 3.Call CFileMan::Move() to move the file from system drive to the one of the dual drive drive.
//! 4.Call CFileMan::Move(), to move the file from dual drive to the systemdrive .
//! 5.Delete the directory in which the file is moved.
//! 6.Perform the above operation concurrently on both the dual drives
//!
//! @SYMTestPriority High
//! @SYMTestExpectedResults Files are moved from systemdrive to dual drives concurrantly.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0011_MkDir_drive1
COMMAND file1 new
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0011_NewL_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move2_drive1
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0011_Open2_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0011_RmDir_drive1
COMMAND file1 Close
COMMAND fileMan1 ~
COMMAND file1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND rfs2 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0011_MkDir_drive2
COMMAND file2 new
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0011_NewL_drive2
COMMAND fileMan2 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move_drive2
COMMAND fileMan2 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move2_drive2
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0011_Open2_drive2
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0011_RmDir_drive2
COMMAND file2 Close
COMMAND fileMan2 ~
COMMAND file2 ~
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0006
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0007
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0007
//! @SYMAPI RFs::Volume();RFs::SetVolumeLabel()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 02/07/2008
//! @SYMTestCaseDesc Get the Volume information for drives concurrently
//! @SYMTestActions 1. Call Connect().
//! 2. Saving volume label.
//! 3. Call SetVolumeLabel() passing "Test" as first parameter and the drive number as a second parameter.
//! 4. Call Volume() passing TVolumeInfo reference as first parameter and the drive number as a second parameter.
//! 5. Restoring volume label.
//! 6. Perform above operation concurrantly on both the drives.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Set and get the volume information of both the drives concurrently.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive1
COMMAND rfs1 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive1
COMMAND rfs1 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive1
COMMAND rfs1 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive1
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND rfs2 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive2
COMMAND rfs2 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive2
COMMAND rfs2 Volume PBASE-F32-DualDrive-Publicapi-RAM-0012_Volume_drive2
COMMAND rfs2 SetVolumeLabel PBASE-F32-DualDrive-Publicapi-RAM-0012_SetVolumeLabel_drive2
COMMAND rfs2 Close
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0007
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0008
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0008
//! @SYMAPI CFileMan:Move();RFile::Read();RFile::Write()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 02/07/2008
//! @SYMTestCaseDesc Move the file from system drive to one of the dual drive concurrenlty with the read/write operation on another dual drive
//!
//! @SYMTestActions 1.Move the file from systemdrive to dual drive and back from dual drive to system drive.
//! 2.Write and read the content of the file from other drive in concurrent with above action on another drive
//! @SYMTestPriority High
//! @SYMTestExpectedResults File is moved in concurrent with read/write operation on another drive.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0011_MkDir_drive1
COMMAND file1 new
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0011_NewL_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0011_Move2_drive1
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0011_Open2_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0011_RmDir_drive1
COMMAND file1 Close
COMMAND fileMan1 ~
COMMAND file1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
COMMAND file2 Close
COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0008
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0009
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0009
//! @SYMAPI RFs::MkDirAll();TEntry::IsDir();RFs::RmDir()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Try creating directory and removing directory with read and write operation concurrantly on dual drives.
//!
//! @SYMTestActions 1. Create RFs instance.
//! 2. Call RFs::MkDirAll() to create the directories.
//! 3. Check the directory created using TEntry()
//! 4. Remove the directory.
//! 5. Perform Read/Write operation on a file on different drive in concurrent with the above operation
//!
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Creates the directories on to both the drives in concurrent with the read/write operation on the other drive.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT TEntry tEntry1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0002_MkdirAll_drive1
COMMAND tEntry1 new
COMMAND rfs1 Entry PBASE-F32-DualDrive-Publicapi-RAM-0002_Entry_drive1
COMMAND tEntry1 IsDir PBASE-F32-DualDrive-Publicapi-RAM-0002_IsDir_drive1
COMMAND tEntry1 ~
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0002_RmDir_drive1
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
COMMAND file2 Close
COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0009
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0010
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0010
//! @SYMAPI CDirScan::SetScanDataL();CDirScan::NextL()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 02/07/2008
//! @SYMTestCaseDesc Testcase to get the filtered list of filess from both the drives CONCURRENTly
//! @SYMTestActions 1.Call Create a RFs session and call it's Connect() function.
//! 2.Call RFs::MkDirAll() and <Drive>\dirscan\TempDir\ as parameter
//! 3.Call CDirScan::NewL() and connected file server session as parameter.
//! 4.Call CDirScan::SetScanDataL() and <Drive>\dirscan\ as first parameter, KEntryAttNormal as second
//! parameter, ESortByName as third parameter and EScanDownTree as fourth parameter
//! 5.Call CDirScan::NextL() and CDir object as parameter.
//! 6.Call CDirScan::FullPath() to verify the expected directory path.
//! 7.Call CDir::Count() to verify the number of entries returned.
//! 8.Call CDir::operator[] to verify the entries returned.
//! 9.Call RFs::RmDir() and <Drive>\dirscan\TempDir\ as parameter
//! 10. Perform above operation on other drive concurrently
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Filters the file set with KEntryAttNormal as attribute mask on both the drives
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT CFileMan fileMan1
CREATE_OBJECT TEntry tEntry1
CREATE_OBJECT CDirScan cdirScan1
CREATE_OBJECT CDir cdir1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive1
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive1
COMMAND tEntry1 new
COMMAND cdirScan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive1
COMMAND cdirScan1 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive1
COMMAND cdirScan1 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive1
COMMAND cdirScan1 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive1
COMMAND cdir1 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive1
COMMAND cdir1 ~
COMMAND cdirScan1 ~
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive1
COMMAND tEntry1 ~
COMMAND fileMan1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive1
COMMAND fileMan1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT CFileMan fileMan2
CREATE_OBJECT TEntry tEntry2
CREATE_OBJECT CDirScan cdirScan2
CREATE_OBJECT CDir cdir2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive2
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive2
COMMAND tEntry2 new
COMMAND cdirScan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive2
COMMAND cdirScan2 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive2
COMMAND cdirScan2 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive2
COMMAND cdirScan2 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive2
COMMAND cdir2 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive2
COMMAND cdir2 ~
COMMAND cdirScan2 ~
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive2
COMMAND tEntry2 ~
COMMAND fileMan2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive2
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive2
COMMAND fileMan2 ~
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0010
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0011
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0011
//! @SYMAPI CDirScan::SetScanDataL();RFile::Read();RFile::Write()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 02/07/2008
//! @SYMTestCaseDesc Testcase to get the filtered list of files in concurrant with read/write operation
//! @SYMTestActions 1. Filter the files with attribute normal.
//! 2. Perform write/ read operation in concurrant.
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Filters the file set with KEntryAttNormal as attribute mask in concurrant with read/write operation on another drive
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT CFileMan fileMan1
CREATE_OBJECT TEntry tEntry1
CREATE_OBJECT CDirScan cdirScan1
CREATE_OBJECT CDir cdir1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive1
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive1
COMMAND tEntry1 new
COMMAND cdirScan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive1
COMMAND cdirScan1 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive1
COMMAND cdirScan1 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive1
COMMAND cdirScan1 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive1
COMMAND cdir1 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive1
COMMAND cdir1 ~
COMMAND cdirScan1 ~
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive1
COMMAND tEntry1 ~
COMMAND fileMan1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive1
COMMAND fileMan1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive1
COMMAND fileMan1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
COMMAND file2 Close
COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0011
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0012
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0012
//! @SYMAPI CFileMan::Attribs();CFileMan::Copy();RFile::Read();RFile::Write()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Copy files on to the drive in concurrent with read/write operation on the other drive.
//!
//! @SYMTestActions 1. Call Connect().
//! 2. Call Copy() to copy files on to the mmc drives.
//! 3. Perform read/write operation on the other drive concurrenlty
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Copying of file will be done concurranlty with the read/write operation
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND file1 new
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0005_Open_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0005_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0005_Copy_drive1
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0005_Attribs_drive1
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0005_Delete_drive1
COMMAND fileMan1 ~
COMMAND file1 Close
COMMAND file1 ~
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open1_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0008_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0008_Copy_drive2
COMMAND file2 Close
COMMAND file2 Replace PBASE-F32-DualDrive-Publicapi-RAM-0008_Replace_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0008_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0008_Open_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0008_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0008_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0012
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0013
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0013
//! @SYMAPI CFileMan::Attribs();CFileMan::Copy()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Copies large file on to the drive in cuncurrent with read/write operation on the large file on the other drive.
//!
//! @SYMTestActions
//! 1. Call Copy() to copy files on to the mmc drives.
//! 2. Perform read/write operation on the other drive concurrenlty
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Copying of file will be done concurranlty with the read/write operation
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND file1 new
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0020_Open_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0020_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0020_Copy_drive1
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0020_Attribs_drive1
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0020_Delete_drive1
COMMAND fileMan1 ~
COMMAND file1 Close
COMMAND file1 ~
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0018_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0018_Copy_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0018_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0018_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0018_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0013
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0014
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0014
//! @SYMAPI CFileMan:Move();RFile::Read();RFile::Write()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 03/07/2008
//! @SYMTestCaseDesc Move the much large file in concurrant with the read/write operation on the file on another drive concurrenlty
//!
//! @SYMTestActions 1.Create a RFs session and call it's Connect() function.
//! 2.Call CFileMan::NewL(RFs &aFs) and connected file server session as parameter.
//! 3.Call CFileMan::Move() to move the file from system drive to one of the dual drive.
//! 4.Perform Read/write operation on the other drive
//! @SYMTestPriority High
//! @SYMTestExpectedResults File moving and read/write operation on diff drives performed successfully
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 50 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDir PBASE-F32-DualDrive-Publicapi-RAM-0021_MkDir_drive1
COMMAND file1 new
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0021_NewL_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0021_Move_drive1
COMMAND fileMan1 Move PBASE-F32-DualDrive-Publicapi-RAM-0021_Move2_drive1
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0021_Open2_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0021_RmDir_drive1
COMMAND file1 Close
COMMAND fileMan1 ~
COMMAND file1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0018_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0018_Copy_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0018_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0018_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0018_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0014
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0015
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0015
//! @SYMAPI CDirScan::SetScanDataL;CDirScan::NextL()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 02/07/2008
//! @SYMTestCaseDesc Testcase to get the filtered list of filess from both the drives concurrently
//! @SYMTestActions 1.Call Create a RFs session and call it's Connect() function.
//! 2.Call RFs::MkDirAll() and <Drive>\dirscan\TempDir\ as parameter
//! 3.Call CDirScan::NewL() and connected file server session as parameter.
//! 4.Call CDirScan::SetScanDataL() and <Drive>\dirscan\ as first parameter, KEntryAttReadOnly as second
//! parameter, ESortByName as third parameter and EScanDownTree as fourth parameter
//! 5.Call CDirScan::NextL() and CDir object as parameter.
//! 6.Call CDirScan::FullPath() to verify the expected directory path.
//! 7.Call CDir::Count() to verify the number of entries returned.
//! 8.Call CDir::operator[] to verify the entries returned.
//! 9.Call RFs::RmDir() and <Drive>\dirscan\TempDir\ as parameter
//! 10. Perform above operation on both the drives concurrently
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Filters the file set with KEntryAttReadOnly as attribute mask on one drive and KEntryAttrNormal on other drives
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT CFileMan fileMan1
CREATE_OBJECT TEntry tEntry1
CREATE_OBJECT CDirScan cdirScan1
CREATE_OBJECT CDir cdir1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND rfs1 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0023_MkDirAll_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0023_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy1_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy2_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy3_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0023_Copy4_drive1
COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt1_drive1
COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt2_drive1
COMMAND tEntry1 new
COMMAND cdirScan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0023_CDirScan_NewL_drive1
COMMAND cdirScan1 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0023_SetScanDataL_drive1
COMMAND cdirScan1 NextL PBASE-F32-DualDrive-Publicapi-RAM-0023_NextL_drive1
COMMAND cdirScan1 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0023_FullPath_drive1
COMMAND cdir1 Count PBASE-F32-DualDrive-Publicapi-RAM-0023_Count_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0023_index1_drive1
COMMAND cdir1 [] PBASE-F32-DualDrive-Publicapi-RAM-0023_index2_drive1
COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt4_drive1
COMMAND rfs1 SetAtt PBASE-F32-DualDrive-Publicapi-RAM-0023_SetAtt5_drive1
COMMAND cdir1 ~
COMMAND cdirScan1 ~
COMMAND tEntry1 ~
COMMAND fileMan1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0023_Delete_drive1
COMMAND rfs1 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0023_RmDir2_drive1
COMMAND fileMan1 ~
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 100 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT CFileMan fileMan2
CREATE_OBJECT TEntry tEntry2
CREATE_OBJECT CDirScan cdirScan2
CREATE_OBJECT CDir cdir2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy1_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy2_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy3_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0015_Copy4_drive2
COMMAND rfs2 MkDirAll PBASE-F32-DualDrive-Publicapi-RAM-0015_MkDirAll2_drive2
COMMAND tEntry2 new
COMMAND cdirScan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0015_CDirScan_NewL_drive2
COMMAND cdirScan2 SetScanDataL PBASE-F32-DualDrive-Publicapi-RAM-0015_SetScanDataL_drive2
COMMAND cdirScan2 NextL PBASE-F32-DualDrive-Publicapi-RAM-0015_NextL_drive2
COMMAND cdirScan2 FullPath PBASE-F32-DualDrive-Publicapi-RAM-0015_FullPath_drive2
COMMAND cdir2 Count PBASE-F32-DualDrive-Publicapi-RAM-0015_Count_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index1_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index2_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index3_drive2
COMMAND cdir2 [] PBASE-F32-DualDrive-Publicapi-RAM-0015_index4_drive2
COMMAND cdir2 ~
COMMAND cdirScan2 ~
COMMAND rfs2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir1_drive2
COMMAND tEntry2 ~
COMMAND fileMan2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0015_Delete_drive2
COMMAND fileMan2 RmDir PBASE-F32-DualDrive-Publicapi-RAM-0015_RmDir2_drive2
COMMAND fileMan2 ~
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0015
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0017
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0017
//! @SYMAPI RFormat::Open();RFormat::Next();RFile::Copy()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 03/07/2008
//! @SYMTestCaseDesc Format the one drive concurrenlty with Copy operation on other drive.
//! Uses API elements: Format()
//! @SYMTestActions 1. Call Format() on the drive.
//! 2. Try Copying files on to the other drive concurrantly with above operation
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults formats the one drive with the read/write operation on another drive concurrently.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs1
CREATE_OBJECT RFile file1
CREATE_OBJECT CFileMan fileMan1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND file1 new
COMMAND file1 Open PBASE-F32-DualDrive-Publicapi-RAM-0020_Open_drive1
COMMAND fileMan1 NewL PBASE-F32-DualDrive-Publicapi-RAM-0020_NewL_drive1
COMMAND fileMan1 Copy PBASE-F32-DualDrive-Publicapi-RAM-0020_Copy_drive1
COMMAND fileMan1 Attribs PBASE-F32-DualDrive-Publicapi-RAM-0020_Attribs_drive1
COMMAND rfs1 Delete PBASE-F32-DualDrive-Publicapi-RAM-0020_Delete_drive1
COMMAND fileMan1 ~
COMMAND file1 Close
COMMAND file1 ~
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFormat format2
CREATE_OBJECT RFs rfs2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND format2 new
COMMAND format2 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive2
COMMAND format2 Next
COMMAND format2 Close
COMMAND format2 ~
COMMAND rfs2 Close
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0017
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0018
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0018
//! @SYMAPI RFormat::Open();RFormat::Next();RFile::Read();RFile::Write()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 03/07/2008
//! @SYMTestCaseDesc Format the one drive concurrenlty with read/write operation on large file on another drive.
//! Uses API elements: Format()
//! @SYMTestActions 1. Call Format() on the drive.
//! 2. Try Writing and reading operation on the drive concurrantly with above operation
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults formats the one drive with the read/write operation on another drive concurrently.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFormat format1
CREATE_OBJECT RFs rfs1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND format1 new
COMMAND format1 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive1
COMMAND format1 Next
COMMAND format1 Close
COMMAND format1 ~
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFs rfs2
CREATE_OBJECT RFile file2
CREATE_OBJECT CFileMan fileMan2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND file2 new
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open_drive2
COMMAND fileMan2 NewL PBASE-F32-DualDrive-Publicapi-RAM-0018_NewL_drive2
COMMAND fileMan2 Copy PBASE-F32-DualDrive-Publicapi-RAM-0018_Copy_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
COMMAND file2 Write PBASE-F32-DualDrive-Publicapi-RAM-0018_Write_drive2
COMMAND file2 Close
COMMAND file2 Open PBASE-F32-DualDrive-Publicapi-RAM-0018_Open2_drive2
COMMAND file2 Read PBASE-F32-DualDrive-Publicapi-RAM-0018_Read_drive2
COMMAND file2 Close
COMMAND file2 ~
COMMAND rfs2 Delete PBASE-F32-DualDrive-Publicapi-RAM-0018_Delete_drive2
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0018
START_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0016
//! @SYMTestCaseID PBASE-F32-DualDrive-Publicapi-RAM-0016
//! @SYMAPI RFormat::Open();RFormat::Next()
//! @SYMAuthor Nirmala Bailur
//! @SYMCreationDate 30/05/2008
//! @SYMTestCaseDesc Try to format both the drives.
//! Uses API elements: Format()
//! @SYMTestActions
//! 1. Call Format() on both the drives.
//! 2. Call Close().
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestExpectedResults Function Format() returns KErrNone and formats both the drives.
//! @SYMTestType CIT
CONCURRENT
START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFormat format1
CREATE_OBJECT RFs rfs1
COMMAND rfs1 new
COMMAND rfs1 Connect
COMMAND format1 new
COMMAND format1 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive1
COMMAND format1 Next
COMMAND format1 Close
COMMAND format1 ~
COMMAND rfs1 Close
COMMAND rfs1 ~
END_TEST_BLOCK
START_TEST_BLOCK 1000 T_Sfsrv \base\PBASE-F32-DUAL-DRIVE-Publicapi-RAM.ini
CREATE_OBJECT RFormat format2
CREATE_OBJECT RFs rfs2
COMMAND rfs2 new
COMMAND rfs2 Connect
COMMAND format2 new
COMMAND format2 Open PBASE-F32-DualDrive-Publicapi-RAM-0004_Open_drive2
COMMAND format2 Next
COMMAND format2 Close
COMMAND format2 ~
COMMAND rfs2 Close
COMMAND rfs2 ~
END_TEST_BLOCK
CONSECUTIVE
END_TESTCASE PBASE-F32-DualDrive-Publicapi-RAM-0016