// Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of the License "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// template\template_variant\inc\lffsdev.h
// Header file for a Logging Flash file system (LFFS) physical device driver
// for a standard Common Flash Interface (CFI) based NOR flash chip.
// This file is part of the Template Base port
//
//
#ifndef __LFFSDEV_H__
#define __LFFSDEV_H__
#include <drivers/flash_media.h>
#include <template_assp.h>
#define FLASH_FAULT() Kern::Fault("LFFSDEV",__LINE__)
//
// TO DO: (mandatory)
//
// Define the bus width (typically this will be 16 or 32)
// and the number of devices spanning the bus (typically 1, 2 or 4).
//
// Possible value are : FLASH_BUS_WIDTH FLASH_BUS_DEVICES
// 32 1 1 x 32 bit device
// 32 2 2 x 16 bit devices
// 32 4 4 x 8 bit devices
// 16 1 1 x 16 bit device
// 16 2 2 x 8 bit devices
//
//
#define FLASH_BUS_WIDTH 32 // EXAMPLE_ONLY
#define FLASH_BUS_DEVICES 2 // EXAMPLE_ONLY
#if FLASH_BUS_WIDTH == 32
#define TFLASHWORD TUint32
#define FLASH_BYTES_TO_WORDS(aNumBytes) (aNumBytes >> 2)
#define FLASH_ADDRESS_IN_BYTES(aWordAddr) (aWordAddr << 2)
#define FLASH_ERASE_WORD_VALUE 0xFFFFFFFF
#elif FLASH_BUS_WIDTH == 16
#define TFLASHWORD TUint16
#define FLASH_BYTES_TO_WORDS(aNumBytes) (aNumBytes >> 1)
#define FLASH_ADDRESS_IN_BYTES(aWordAddr) (aWordAddr << 1)
#define FLASH_ERASE_WORD_VALUE 0xFFFF
#else // FLASH_BUS_WIDTH == 8
#define TFLASHWORD TUint8
#define FLASH_BYTES_TO_WORDS(aNumBytes) aNumBytes
#define FLASH_ADDRESS_IN_BYTES(aWordAddr) aWordAddr
#define FLASH_ERASE_WORD_VALUE 0xFF
#endif
#define BUS_WIDTH_PER_DEVICE (FLASH_BUS_WIDTH / FLASH_BUS_DEVICES)
/********************************************
Common Flash Interface (CFI) definitions for various
combinations of FLASH_BUS_WIDTH and FLASH_BUS_DEVICES
********************************************/
//
// TO DO: (optional)
// Delete the definitions that are not applicable to your device
//
#if FLASH_BUS_WIDTH == 32 && FLASH_BUS_DEVICES == 1 // 1x32bit devices on 32bit bus
const TFLASHWORD KCmdReadArray = 0x000000FF; // Set read array command
const TFLASHWORD KCmdReadStatusRegister = 0x00000070; // Read status register command
const TFLASHWORD KCmdClearStatusRegister = 0x00000050; // Clear status register error bits command
const TFLASHWORD KCmdWriteToBuffer = 0x000000E8; // Write to buffer setup command
const TFLASHWORD KCmdBlockErase = 0x00000020; // Block erase command
const TFLASHWORD KCmdEraseSuspend = 0x000000B0; // Erase suspend command
const TFLASHWORD KCmdEraseResume = 0x000000D0; // Erase resume command (actually a confirm)
const TFLASHWORD KCmdConfirm = 0x000000D0; // Confirm command
const TFLASHWORD KCmdReadIdentifiers = 0x00000090; // Read Flash identifiers command
const TFLASHWORD KCmdReadQuery = 0x00000098; // Read Flash Query info command
const TFLASHWORD KStsReady = 0x00000080; // Ready bit
const TFLASHWORD KStsSuspended = 0x00000040; // Suspend bit
const TFLASHWORD KStsEraseError = 0x00000020; // Erase error bit
const TFLASHWORD KStsWriteError = 0x00000010; // Write error bit
const TFLASHWORD KStsVppLow = 0x00000008; // Vpp low bit
const TFLASHWORD KStsReserved = 0x00000004; // Reserved bit (not used)
const TFLASHWORD KStsLocked = 0x00000002; // Locked bit
const TFLASHWORD KStsReserved2 = 0x00000001; // Reserved bit
#elif FLASH_BUS_WIDTH == 32 && FLASH_BUS_DEVICES == 2 // 2x16bit devices on 32bit bus
const TFLASHWORD KCmdReadArray = 0x00FF00FF; // Set read array command
const TFLASHWORD KCmdReadStatusRegister = 0x00700070; // Read status register command
const TFLASHWORD KCmdClearStatusRegister = 0x00500050; // Clear status register error bits command
const TFLASHWORD KCmdWriteToBuffer = 0x00E800E8; // Write to buffer setup command
const TFLASHWORD KCmdBlockErase = 0x00200020; // Block erase command
const TFLASHWORD KCmdEraseSuspend = 0x00B000B0; // Erase suspend command
const TFLASHWORD KCmdEraseResume = 0x00D000D0; // Erase resume command (actually a confirm)
const TFLASHWORD KCmdConfirm = 0x00D000D0; // Confirm command
const TFLASHWORD KCmdReadIdentifiers = 0x00900090; // Read Flash identifiers command
const TFLASHWORD KCmdReadQuery = 0x00980098; // Read Flash Query info command
const TFLASHWORD KStsReady = 0x00800080; // Ready bit
const TFLASHWORD KStsSuspended = 0x00400040; // Suspend bit
const TFLASHWORD KStsEraseError = 0x00200020; // Erase error bit
const TFLASHWORD KStsWriteError = 0x00100010; // Write error bit
const TFLASHWORD KStsVppLow = 0x00080008; // Vpp low bit
const TFLASHWORD KStsReserved = 0x00040004; // Reserved bit (not used)
const TFLASHWORD KStsLocked = 0x00020002; // Locked bit
const TFLASHWORD KStsReserved2 = 0x00010001; // Reserved bit
#elif FLASH_BUS_WIDTH == 32 && FLASH_BUS_DEVICES == 4 // 4x8bit devices on 32bit bus
const TFLASHWORD KCmdReadArray = 0xFFFFFFFF; // Set read array command
const TFLASHWORD KCmdReadStatusRegister = 0x70707070; // Read status register command
const TFLASHWORD KCmdClearStatusRegister = 0x50505050; // Clear status register error bits command
const TFLASHWORD KCmdWriteToBuffer = 0xE8E8E8E8; // Write to buffer setup command
const TFLASHWORD KCmdBlockErase = 0x20202020; // Block erase command
const TFLASHWORD KCmdEraseSuspend = 0xB0B0B0B0; // Erase suspend command
const TFLASHWORD KCmdEraseResume = 0xD0D0D0D0; // Erase resume command (actually a confirm)
const TFLASHWORD KCmdConfirm = 0xD0D0D0D0; // Confirm command
const TFLASHWORD KCmdReadIdentifiers = 0x90909090; // Read Flash identifiers command
const TFLASHWORD KCmdReadQuery = 0x98989898; // Read Flash Query info command
const TFLASHWORD KStsReady = 0x80808080; // Ready bit
const TFLASHWORD KStsSuspended = 0x40404040; // Suspend bit
const TFLASHWORD KStsEraseError = 0x20202020; // Erase error bit
const TFLASHWORD KStsWriteError = 0x10101010; // Write error bit
const TFLASHWORD KStsVppLow = 0x08080808; // Vpp low bit
const TFLASHWORD KStsReserved = 0x04040404; // Reserved bit (not used)
const TFLASHWORD KStsLocked = 0x02020202; // Locked bit
const TFLASHWORD KStsReserved2 = 0x01010101; // Reserved bit
#elif FLASH_BUS_WIDTH == 16 && FLASH_BUS_DEVICES == 1 // 1x16bit devices on 16bit bus
const TFLASHWORD KCmdReadArray = 0x00FF; // Set read array command
const TFLASHWORD KCmdReadStatusRegister = 0x0070; // Read status register command
const TFLASHWORD KCmdClearStatusRegister = 0x0050; // Clear status register error bits command
const TFLASHWORD KCmdWriteToBuffer = 0x00E8; // Write to buffer setup command
const TFLASHWORD KCmdBlockErase = 0x0020; // Block erase command
const TFLASHWORD KCmdEraseSuspend = 0x00B0; // Erase suspend command
const TFLASHWORD KCmdEraseResume = 0x00D0; // Erase resume command (actually a confirm)
const TFLASHWORD KCmdConfirm = 0x00D0; // Confirm command
const TFLASHWORD KCmdReadIdentifiers = 0x0090; // Read Flash identifiers command
const TFLASHWORD KCmdReadQuery = 0x0098; // Read Flash Query info command
const TFLASHWORD KStsReady = 0x0080; // Ready bit
const TFLASHWORD KStsSuspended = 0x0040; // Suspend bit
const TFLASHWORD KStsEraseError = 0x0020; // Erase error bit
const TFLASHWORD KStsWriteError = 0x0010; // Write error bit
const TFLASHWORD KStsVppLow = 0x0008; // Vpp low bit
const TFLASHWORD KStsReserved = 0x0004; // Reserved bit (not used)
const TFLASHWORD KStsLocked = 0x0002; // Locked bit
const TFLASHWORD KStsReserved2 = 0x0001; // Reserved bit
#elif FLASH_BUS_WIDTH == 16 && FLASH_BUS_DEVICES == 2 // 2x8bit devices on 16bit bus
const TFLASHWORD KCmdReadArray = 0xFFFF; // Set read array command
const TFLASHWORD KCmdReadStatusRegister = 0x7070; // Read status register command
const TFLASHWORD KCmdClearStatusRegister = 0x5050; // Clear status register error bits command
const TFLASHWORD KCmdWriteToBuffer = 0xE8E8; // Write to buffer setup command
const TFLASHWORD KCmdBlockErase = 0x2020; // Block erase command
const TFLASHWORD KCmdEraseSuspend = 0xB0B0; // Erase suspend command
const TFLASHWORD KCmdEraseResume = 0xD0D0; // Erase resume command (actually a confirm)
const TFLASHWORD KCmdConfirm = 0xD0D0; // Confirm command
const TFLASHWORD KCmdReadIdentifiers = 0x9090; // Read Flash identifiers command
const TFLASHWORD KCmdReadQuery = 0x9898; // Read Flash Query info command
const TFLASHWORD KStsReady = 0x8080; // Ready bit
const TFLASHWORD KStsSuspended = 0x4040; // Suspend bit
const TFLASHWORD KStsEraseError = 0x2020; // Erase error bit
const TFLASHWORD KStsWriteError = 0x1010; // Write error bit
const TFLASHWORD KStsVppLow = 0x0808; // Vpp low bit
const TFLASHWORD KStsReserved = 0x0404; // Reserved bit (not used)
const TFLASHWORD KStsLocked = 0x0202; // Locked bit
const TFLASHWORD KStsReserved2 = 0x0101; // Reserved bit
#endif
// address at which to issue the Query command
const TUint32 KCmdReadQueryOffset = 0x55;
const TUint32 KQueryOffsetQRY = 0x10;
const TUint32 KQueryOffsetSizePower = 0x27;
const TUint32 KQueryOffsetWriteBufferSizePower = 0x2A;
const TUint32 KQueryOffsetErasePartitions = 0x2C;
const TUint32 KQueryOffsetEraseBlockCount = 0x2D;
const TUint32 KQueryOffsetEraseBlockSize = 0x2F;
/********************************************
* Driver definitions
********************************************/
const TInt KMaxWriteSetupAttempts = 8;
const TInt KMaxEraseResumeAttempts = 32;
const TInt KDataBufSize=1024;
// TO DO: (mandatory)
// Define the following timeouts in terms of timer ticks
// This is only example code... you may need to modify it for your hardware
// The examples given here assume a timer clock frequency of 3.6864MHz
const TUint32 KFlashWriteTimerPeriod = 1500; // 1500 ticks @ 3.6864MHz = 406us
const TUint32 KFlashWriteTimerRetries = 3; // total 1.2ms
const TUint32 KFlashSuspendTimerPeriod = 1500; // 1500 ticks @ 3.6864MHz = 406us
const TUint32 KFlashSuspendTimerRetries = 3; // total 1.2ms
const TUint32 KFlashEraseTimerPeriod = 100000; // 100000 ticks @ 3.6864MHz = 27ms
const TUint32 KFlashEraseTimerRetries = 100; // total 2.7sec
const TInt KEraseSuspendHoldOffTime = 130; // 130ms
/********************************************
* Media driver class
********************************************/
//
// TO DO: (optional)
//
// Add any private functions and data you require
//
class DMediaDriverFlashTemplate : public DMediaDriverFlash
{
public:
enum TWriteState {EWriteIdle=0,EWriting=1};
enum TEraseState {EEraseIdle=0,EErase=1,EEraseNoSuspend=2,ESuspendPending=3,ESuspending=4,ESuspended=5};
enum TEvent {EPollTimer=1,ETimeout=2,EHoldOffEnd=4};
DMediaDriverFlashTemplate(TInt aMediaId);
// replacing pure virtual - FLASH device specific stuff
virtual TInt Initialise();
virtual TUint32 EraseBlockSize();
virtual TUint32 TotalSize();
virtual TInt DoRead();
virtual TInt DoWrite();
virtual TInt DoErase();
private:
void IPostEvents(TUint32 aEvents);
void HandleEvents(TUint32 aEvents);
void ClearEvents(TUint32 aEvents);
void StartPollTimer(TUint32 aPeriod, TUint32 aRetries);
void StartPollTimer();
void StartHoldOffTimer();
void CancelHoldOffTimer();
void StartErase();
void SuspendErase();
void WriteStep();
void DoFlashReady(TUint32 aStatus);
void DoFlashTimeout();
void StartPendingRW();
TUint32 ReadQueryData8(TUint32 aOffset);
TUint32 ReadQueryData16(TUint32 aOffset);
void ReadFlashParameters();
static void Isr(TAny* aPtr);
static void HoldOffTimerFn(TAny* aPtr);
static void EventDfc(TAny* aPtr);
private:
TWriteState iWriteState;
TEraseState iEraseState;
TLinAddr iBase;
TUint32 iEraseBlockSize;
TUint32 iTotalSize;
TUint32 iWriteBufferSize;
TUint32 iWritePos;
TInt iDataBufPos;
TInt iDataBufRemain;
TUint8* iData; // data being written
TUint32 iErasePos;
NTimer iHoldOffTimer;
TUint32 iEvents;
TDfc iEventDfc;
TUint32 iPollPeriod;
TUint32 iPollRetries;
TUint32 iEraseError;
TInt iWriteError;
TInt iEraseAttempt;
DPlatChunkHw* iFlashChunk;
};
#endif