kerneltest/f32test/bench/testscripts/fat_perf_test_dircache_partially_cached_6.8MB_data_H2.bat
Convert Kernelhwsrv package from SFL to EPL
kernel\eka\compsupp is subject to the ARM EABI LICENSE
userlibandfileserver\fatfilenameconversionplugins\unicodeTables is subject to the Unicode license
kernel\eka\kernel\zlib is subject to the zlib license
rem
rem Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
rem All rights reserved.
rem This component and the accompanying materials are made available
rem under the terms of the License "Eclipse Public License v1.0"
rem which accompanies this distribution, and is available
rem at the URL "http://www.eclipse.org/legal/epl-v10.html".
rem
rem Initial Contributors:
rem Nokia Corporation - initial contribution.
rem
rem Contributors:
rem
rem Description:
rem
rem -------------------------------------------------------------------------------------------------------------------
rem @SYMTestCaseID PBASE-FAT-PERF-1375
rem @SYMTestType PT
rem @SYMPREQ PREQ1885
rem @SYMTestCaseDesc To check the directory cache performance by opening multiple files linearly when 6.8MB data is used with 2MB DirCache
rem (i.e Partially Cached - 30% of data cached)
rem @SYMTestActions 0. Make sure the Test pre-settings
rem 1. Set FAT_MinDirCacheSize = 128 KB and FAT_MaxDirCacheSize = 2048 KB in ESTART.TXT
rem 2. Try to fill DirCache with 6.8 MB data
rem Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.
rem This should not be accounted for measurement purpose.
rem 3. Open the following files under \\D1\\D2\\D3\\D4\\
rem ABCD~_20
rem ABCD~_200
rem ABCD~_1000
rem ABCD~_3000
rem ABCD~_4000
rem ABCD~_6000
rem ABCD~_8000
rem 4. Measure the time taken to open each of these files
rem @SYMTestExpectedResults 1. FAT_MinDirCacheSize = 128 KB and FAT_MaxDirCacheSize = 2048 KB
rem 2. DirCache filled with 2MB data only
rem 3. File Open Successful
rem 4. Time in ms for each file
rem Note: It is assumed that memory card is mounted on e: drive on the target board
rem -------------------------------------------------------------------------------------------------------------------
t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1
t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0
rem -------------------------------------------------------------------------------------------------------------------
rem @SYMTestCaseID PBASE-FAT-PERF-1376
rem @SYMTestType PT
rem @SYMPREQ PREQ1885
rem @SYMTestCaseDesc To check the directory cache performance by opening multiple files randomly when 6.8MB data is used with 2MB DirCache
rem (i.e Partially Cached - 30% of data cached)
rem @SYMTestActions 0. Make sure the Test pre-settings
rem 1. Set FAT_MinDirCacheSize = 128 KB and FAT_MaxDirCacheSize = 2048 KB in ESTART.TXT
rem 2. Try to fill DirCache with 8 MB data
rem Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.
rem This should not be accounted for measurement purpose.
rem 3. Open the following files under \\D1\\D2\\D3\\D4\\
rem ABCD~_8000
rem ABCD~_20
rem ABCD~_4000
rem ABCD~_1000
rem ABCD~_3000
rem ABCD~_200
rem ABCD~_6000
rem 4. Measure the time taken to open each of these files
rem @SYMTestExpectedResults 1. FAT_MinDirCacheSize = 128 KB and FAT_MaxDirCacheSize = 2048 KB
rem 2. DirCache filled with 2MB data only
rem 3. File Open Successful
rem 4. Time in ms for each file
rem Note: It is assumed that memory card is mounted on e: drive on the target board
rem -------------------------------------------------------------------------------------------------------------------
t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1
t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_8000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_20 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_4000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_3000 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_200 -n 1 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_6000 -n 1 -m 0
rem -------------------------------------------------------------------------------------------------------------------
rem @SYMTestCaseID PBASE-FAT-PERF-1377
rem @SYMTestType PT
rem @SYMPREQ PREQ1885
rem @SYMTestCaseDesc To check the directory cache performance by creating a file when 6.8MB data is used with 2MB DirCache
rem (i.e Partially Cached - 30% of data cached)
rem @SYMTestActions 0. Make sure the Test pre-settings
rem 1. Set FAT_MinDirCacheSize = 128 KB and FAT_MaxDirCacheSize = 2048 KB in ESTART.TXT
rem 2. Try to fill DirCache with 6.8MB data
rem Note: Before the next step, ABCD~_1 file is opened at root dir \D1\ to set the LeafDirCache.
rem This should not be accounted for measurement purpose.
rem 3. Create FILE_2.TXT in \\D1\\D2\\D3\\D4\\
rem 4. Measure the time taken to create a file
rem @SYMTestExpectedResults 1. FAT_MinDirCacheSize = 128 KB and FAT_MaxDirCacheSize = 2048 KB
rem 2. DirCache filled with 2MB data only
rem 3. Files Creation Successful
rem 4. Time in ms
rem Note: It is assumed that memory card is mounted on e: drive on the target board
rem -------------------------------------------------------------------------------------------------------------------
t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 1
t_fat_perf e -c Open -p D1\D2 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1\D2\D3 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1\D2\D3\D4 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_ -n 8000 -m 0
t_fat_perf e -c Open -p D1 -b ABCD1ABCD2ABCD3ABCD4ABCD5ABCD6ABCD7ABCD8ABCD9ABCD1ABCD2ABCD3ABCD4ABCD_1 -n 1 -m 0
t_fat_perf e -c Create -p D1\D2\D3\D4 -b FILE_2 -n 1 -m 0
rem ---Cleanup------------------------------------------------------------------------------------
rem ---Do not consider this for performance measurement
t_fat_perf e -c Delete -p D1\D2\D3\D4 -b FILE_2 -n 1 -m 0