// Copyright (c) 1995-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of the License "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// e32test\prime\t_semutx.cpp
// Tests the RSemaphore, RMutex and RCriticalSection classes
// Overview:
// Tests the RSemaphore, RMutex and RCriticalSection classes
// API Information:
// RSemaphore, RMutex, RCriticalSection
// Details:
// - Test RSemaphore and RMutex with the producer/consumer scenario.
// Create two threads, use signal and wait to coordinate the
// threads. Verify results are as expected.
// - Calculate the time required to create, resume and close a thread.
// - Test RSemaphore::Wait(timeout) in a variety ways and timeout
// values. Verify results are as expected.
// - Test RMutex via two threads which write to an array. The writing
// and updating of the index is wrapped within a mutex pair. Verify
// results are as expected.
// - Test RCriticalSection via two threads which write to an array. The
// writing and updating of the index is wrapped within a critical section
// pair. Verify results are as expected.
// Platforms/Drives/Compatibility:
// All.
// Assumptions/Requirement/Pre-requisites:
// Failures and causes:
// Base Port information:
//
//
#include <e32test.h>
const TInt KMaxBufferSize=10;
const TInt KMaxArraySize=10;
const TInt KNumProducerItems=100;
enum {EThread1ID=1,EThread2ID};
RTest test(_L("T_SEMUTX"));
RMutex mutex;
RCriticalSection criticalSn;
TInt thread1Count,thread2Count;
TInt arrayIndex;
TInt array[KMaxArraySize];
TInt consumerArray[KNumProducerItems];
RSemaphore slotAvailable,itemAvailable;
class CStack
{
public:
CStack() {iCount=0;};
void Push(TInt aItem) {iStack[iCount++]=aItem;};
TInt Pop(void) {return(iStack[--iCount]);};
private:
TInt iStack[KMaxBufferSize];
TInt iCount;
};
CStack stack;
TInt Producer(TAny*)
{
for(TInt ii=0;ii<KNumProducerItems;ii++)
{
slotAvailable.Wait();
mutex.Wait();
stack.Push(ii);
mutex.Signal();
itemAvailable.Signal();
}
return(KErrNone);
}
TInt Consumer(TAny*)
{
TInt item;
for(TInt ii=0;ii<KNumProducerItems;ii++)
{
itemAvailable.Wait();
mutex.Wait();
item=stack.Pop();
mutex.Signal();
slotAvailable.Signal();
consumerArray[item]=item;
}
return(KErrNone);
}
void BusyWait(TInt aMicroseconds)
{
TTime begin;
begin.HomeTime();
FOREVER
{
TTime now;
now.HomeTime();
TTimeIntervalMicroSeconds iv=now.MicroSecondsFrom(begin);
if (iv.Int64()>=TInt64(aMicroseconds))
return;
}
}
TInt MutexThreadEntryPoint1(TAny*)
//
// Mutex test thread 1
//
{
thread1Count=0;
TBool running=ETrue;
do
{
mutex.Wait();
BusyWait(100000);
if (arrayIndex<KMaxArraySize)
{
array[arrayIndex++]=EThread1ID;
thread1Count++;
}
else
running=EFalse;
mutex.Signal();
} while (running);
return(KErrNone);
}
TInt MutexThreadEntryPoint2(TAny*)
//
// Mutex test thread 2
//
{
thread2Count=0;
TBool running=ETrue;
do
{
mutex.Wait();
BusyWait(200000);
if (arrayIndex<KMaxArraySize)
{
array[arrayIndex++]=EThread2ID;
thread2Count++;
}
else
running=EFalse;
mutex.Signal();
} while (running);
return(KErrNone);
}
TInt CriticalSnThreadEntryPoint1(TAny*)
//
// Critical Section test thread 1
//
{
thread1Count=0;
TBool running=ETrue;
do
{
criticalSn.Wait();
User::After(100000);
if (arrayIndex<KMaxArraySize)
{
array[arrayIndex++]=EThread1ID;
thread1Count++;
}
else
running=EFalse;
criticalSn.Signal();
} while (running);
return(KErrNone);
}
TInt CriticalSnThreadEntryPoint2(TAny*)
//
// Critical Section test thread 2
//
{
thread2Count=0;
TBool running=ETrue;
do
{
criticalSn.Wait();
User::After(200000);
if (arrayIndex<KMaxArraySize)
{
array[arrayIndex++]=EThread2ID;
thread2Count++;
}
else
running=EFalse;
criticalSn.Signal();
} while (running);
return(KErrNone);
}
struct SWaitSem
{
RSemaphore iSem;
TInt iTimeout;
};
TInt WaitSemThread(TAny* a)
{
SWaitSem& ws = *(SWaitSem*)a;
return ws.iSem.Wait(ws.iTimeout);
}
void StartWaitSemThread(RThread& aT, SWaitSem& aW, TThreadPriority aP=EPriorityLess)
{
TInt r = aT.Create(KNullDesC, &WaitSemThread, 0x1000, 0x1000, 0x1000, &aW);
test(r==KErrNone);
aT.SetPriority(aP);
aT.Resume();
}
void WaitForWaitSemThread(RThread& aT, TInt aResult)
{
TRequestStatus s;
aT.Logon(s);
User::WaitForRequest(s);
test(aT.ExitType()==EExitKill);
test(aT.ExitReason()==aResult);
test(s.Int()==aResult);
CLOSE_AND_WAIT(aT);
}
TInt DummyThread(TAny*)
{
return 0;
}
void TestSemaphore2()
{
test.Start(_L("Test semaphore wait with timeout"));
SWaitSem ws;
RThread t;
TTime initial;
TTime final;
TInt elapsed=0;
TInt r = ws.iSem.CreateLocal(0);
test(r==KErrNone);
RThread().SetPriority(EPriorityAbsoluteVeryLow);
TInt threadcount=0;
initial.HomeTime();
while (elapsed<1000000)
{
r = t.Create(KNullDesC, &DummyThread, 0x1000, NULL, NULL);
test(r==KErrNone);
t.SetPriority(EPriorityMore);
t.Resume();
t.Close();
++threadcount;
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
}
RThread().SetPriority(EPriorityNormal);
test.Printf(_L("%d threads in 1 sec\n"),threadcount);
TInt overhead = 1000000/threadcount;
test.Printf(_L("overhead = %dus\n"),overhead);
ws.iTimeout=1000000;
initial.HomeTime();
StartWaitSemThread(t, ws);
WaitForWaitSemThread(t, KErrTimedOut);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
test(elapsed>=900000+overhead && elapsed<1500000+overhead);
ws.iTimeout=-1;
initial.HomeTime();
StartWaitSemThread(t, ws);
WaitForWaitSemThread(t, KErrArgument);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
ws.iTimeout=2000000;
initial.HomeTime();
StartWaitSemThread(t, ws);
User::After(1000000);
ws.iSem.Signal();
WaitForWaitSemThread(t, KErrNone);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
test(elapsed>=900000+overhead && elapsed<1500000+overhead);
ws.iTimeout=100000;
StartWaitSemThread(t, ws, EPriorityMore);
t.Suspend();
ws.iSem.Signal();
User::After(200000);
t.Resume();
WaitForWaitSemThread(t, KErrTimedOut);
test(ws.iSem.Wait(1)==KErrNone);
ws.iTimeout=100000;
StartWaitSemThread(t, ws, EPriorityMore);
t.Suspend();
ws.iSem.Signal();
User::After(50000);
t.Resume();
WaitForWaitSemThread(t, KErrNone);
test(ws.iSem.Wait(1)==KErrTimedOut);
RThread t2;
ws.iTimeout=100000;
StartWaitSemThread(t, ws, EPriorityMuchMore);
StartWaitSemThread(t2, ws, EPriorityMore);
t.Suspend();
ws.iSem.Signal();
test(t2.ExitType()==EExitKill);
test(t.ExitType()==EExitPending);
t.Resume();
WaitForWaitSemThread(t, KErrTimedOut);
WaitForWaitSemThread(t2, KErrNone);
test(ws.iSem.Wait(1)==KErrTimedOut);
ws.iTimeout=1000000;
initial.HomeTime();
StartWaitSemThread(t2, ws, EPriorityMore);
StartWaitSemThread(t, ws, EPriorityMuchMore);
ws.iSem.Signal();
WaitForWaitSemThread(t, KErrNone);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
WaitForWaitSemThread(t2, KErrTimedOut);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
test(elapsed>=900000+2*overhead && elapsed<1500000+2*overhead);
ws.iTimeout=1000000;
initial.HomeTime();
StartWaitSemThread(t2, ws, EPriorityMore);
StartWaitSemThread(t, ws, EPriorityMuchMore);
WaitForWaitSemThread(t, KErrTimedOut);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
WaitForWaitSemThread(t2, KErrTimedOut);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
test(elapsed>=900000+2*overhead && elapsed<1500000+2*overhead);
ws.iTimeout=1000000;
initial.HomeTime();
StartWaitSemThread(t2, ws, EPriorityMore);
StartWaitSemThread(t, ws, EPriorityMuchMore);
t.Kill(299792458);
WaitForWaitSemThread(t2, KErrTimedOut);
WaitForWaitSemThread(t, 299792458);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
test(elapsed>=900000+2*overhead && elapsed<1500000+2*overhead);
ws.iTimeout=1000000;
initial.HomeTime();
StartWaitSemThread(t, ws, EPriorityMore);
StartWaitSemThread(t2, ws, EPriorityMuchMore);
test(t.ExitType()==EExitPending);
test(t2.ExitType()==EExitPending);
ws.iSem.Close();
test(t.ExitType()==EExitKill);
test(t2.ExitType()==EExitKill);
WaitForWaitSemThread(t2, KErrGeneral);
WaitForWaitSemThread(t, KErrGeneral);
final.HomeTime();
elapsed = I64INT(final.Int64()-initial.Int64());
test.Printf(_L("Time taken = %dus\n"), elapsed);
test(elapsed<=50000+3*overhead);
test.End();
}
void TestSemaphore()
{
/*********** TO DO ************/
// Check it panics if the count <0
test.Start(_L("Create"));
RSemaphore semaphore;
RThread thread1, thread2;
semaphore.CreateLocal(0); // creates a DPlatSemaphore but casts it to a pointer to a DSemaphore
// sets semaphore count to the value of the parameter,
// adds object to the K::Semaphores container, sets iHandle
// Local sets DSemaphore.iName to NULL & iOwner to Kern::CurrentProcess()
// Global sets iName to that passed and iOwner to NULL
// Adds a record into CObjectIx containing a pointer to the semaphore object
/* test.Next(_L("Find"));
fullName=semaphore.FullName();
find.Find(fullName); // sets iMatch to fullName (misleadingly named method as it doesn't find anything)
test(find.Next(fullName)== KErrNone);
*/
test.Next(_L("Producer/Consumer scenario"));
// Test Rsemaphore with the producer/consumer scenario RThread thread1, thread2;
TRequestStatus stat1, stat2;
test(mutex.CreateLocal()==KErrNone);
test(slotAvailable.CreateLocal(KMaxBufferSize)==KErrNone);
test(itemAvailable.CreateLocal(0)==KErrNone);
test(thread1.Create(_L("Thread1"),Producer,KDefaultStackSize,0x200,0x200,NULL)==KErrNone);
test(thread2.Create(_L("Thread2"),Consumer,KDefaultStackSize,0x200,0x200,NULL)==KErrNone);
thread1.Logon(stat1);
thread2.Logon(stat2);
test(stat1==KRequestPending);
test(stat2==KRequestPending);
thread1.Resume();
thread2.Resume();
User::WaitForRequest(stat1);
User::WaitForRequest(stat2);
test(stat1==KErrNone);
test(stat2==KErrNone);
for(TInt jj=0;jj<KNumProducerItems;jj++)
test(consumerArray[jj]==jj);
test.Next(_L("Close"));
mutex.Close();
CLOSE_AND_WAIT(thread1);
CLOSE_AND_WAIT(thread2);
test.End();
}
void TestMutex2()
{
RMutex m;
test.Start(_L("Create"));
test(m.CreateLocal()==KErrNone);
// Test RMutex::IsHeld()
test.Next(_L("IsHeld ?"));
test(!m.IsHeld());
test.Next(_L("Wait"));
m.Wait();
test.Next(_L("IsHeld ?"));
test(m.IsHeld());
test.Next(_L("Signal"));
m.Signal();
test.Next(_L("IsHeld ?"));
test(!m.IsHeld());
test.End();
}
void TestMutex()
{
test.Start(_L("Create"));
test(mutex.CreateLocal()==KErrNone);
test.Next(_L("Threads writing to arrays test"));
//
// Create two threads which write to two arrays. The arrays and indexs
// are global and each thread writes an identifier to the arrays. For
// one array the writing and updating of the index is wrapped in a mutex
// pair. The other array is a control and is not wrapaped within mutex.
// Each thread records the number of instances it "thinks" it wrote to
// each array. For the mutex controlled array the actual instances
// written to the array should always be the same as the threads think.
//
arrayIndex=0;
RThread thread1,thread2;
test(thread1.Create(_L("Thread1"),MutexThreadEntryPoint1,KDefaultStackSize,0x2000,0x2000,NULL)==KErrNone);
test(thread2.Create(_L("Thread2"),MutexThreadEntryPoint2,KDefaultStackSize,0x2000,0x2000,NULL)==KErrNone);
TRequestStatus stat1,stat2;
thread1.Logon(stat1);
thread2.Logon(stat2);
test(stat1==KRequestPending);
test(stat2==KRequestPending);
thread1.Resume();
thread2.Resume();
User::WaitForRequest(stat1);
User::WaitForRequest(stat2);
test(stat1==KErrNone);
test(stat2==KErrNone);
TInt thread1ActualCount=0;
TInt thread2ActualCount=0;
TInt ii=0;
while(ii<KMaxArraySize)
{
if (array[ii]==EThread1ID)
thread1ActualCount++;
if (array[ii]==EThread2ID)
thread2ActualCount++;
ii++;
}
test.Printf(_L("T1 %d T1ACT %d T2 %d T2ACT %d"),thread1Count,thread1ActualCount,thread2Count,thread2ActualCount);
test(thread1ActualCount==thread1Count);
test(thread2ActualCount==thread2Count);
test(thread1Count==thread2Count);
test(thread1Count==(KMaxArraySize>>1));
test.Next(_L("Close"));
CLOSE_AND_WAIT(thread1);
CLOSE_AND_WAIT(thread2);
mutex.Close();
test.End();
}
void TestCriticalSection()
//
//As TestMutex, but for RCriticalSection
//
{
test.Start(_L("Create"));
test(criticalSn.CreateLocal()==KErrNone);
/***************** TO DO ***********************
test.Next(_L("Find"));
//
// Test finding the RCriticalSection
//
TFindCriticalSection find;
TFullName fullName;
fullName=criticalSn.FullName();
find.Find(fullName);
test(find.Next(fullName)==KErrNone);
test(fullName==criticalSn.FullName());
************************************************/
test.Next(_L("Threads writing to arrays test"));
//
// Create two threads which write to two arrays. The arrays and indexs
// are global and each thread writes an identifier to the arrays. For
// one array the writing and updating of the index is wrapped in a critical
// section pair. The other array is a control and is not wrapaped within
// a critical section. Each thread records the number of instances it
// "thinks" it wrote to each array. For the mutex controlled array the
// actual instances written to the array should always be the same as the
// threads think.
//
arrayIndex=0;
RThread thread1,thread2;
test(thread1.Create(_L("Thread1"),CriticalSnThreadEntryPoint1,KDefaultStackSize,0x2000,0x2000,NULL)==KErrNone);
test(thread2.Create(_L("Thread2"),CriticalSnThreadEntryPoint2,KDefaultStackSize,0x2000,0x2000,NULL)==KErrNone);
TRequestStatus stat1,stat2;
thread1.Logon(stat1);
thread2.Logon(stat2);
test(stat1==KRequestPending);
test(stat2==KRequestPending);
thread1.Resume();
thread2.Resume();
User::WaitForRequest(stat1);
User::WaitForRequest(stat2);
test(stat1==KErrNone);
test(stat2==KErrNone);
TInt thread1ActualCount=0;
TInt thread2ActualCount=0;
TInt ii=0;
while(ii<KMaxArraySize)
{
if (array[ii]==EThread1ID)
thread1ActualCount++;
if (array[ii]==EThread2ID)
thread2ActualCount++;
ii++;
}
test(thread1ActualCount==thread1Count);
test(thread2ActualCount==thread2Count);
test(thread1Count==thread2Count);
test(thread1Count==(KMaxArraySize>>1));
test.Next(_L("Close"));
CLOSE_AND_WAIT(thread1);
CLOSE_AND_WAIT(thread2);
criticalSn.Close();
test.End();
}
GLDEF_C TInt E32Main()
{
test.Title();
__UHEAP_MARK;
test.Start(_L("Test RSemaphore"));
TestSemaphore();
TestSemaphore2();
test.Next(_L("Test RMutex"));
TestMutex();
TestMutex2();
test.Next(_L("Test RCriticalSection"));
TestCriticalSection();
test.End();
__UHEAP_MARKEND;
return(KErrNone);
}