// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of the License "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
// Check file system against SD specifications
// 
//

//! @file btsdwp.script
//! @SYMTestSuiteName basetestsd
//! @SYMScriptTestEnvironment base

LOAD_SUITE basetestsd -SharedData

PRINT IMPORTANT NOTE
PRINT The following test cases are for SD cards only.
PRINT Testing on any other media (removable or fixed) will fail.

START_TESTCASE PBASE-SDTESTSPECFS1-0202
//!  @SYMTestCaseID PBASE-SDTESTSPECFS1-0202
//!  @SYMTestCaseDesc Inspect Master Boot Record (MBR) against the SD specifications
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Examine MBR
//!      4. Format card (Quick Format)
//!      5. Examine MBR
//!      6. Perform some file operations on the card
//!      7. Examine MBR
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      The MBR rigorously complies with the SD specifications at all times
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd DisplayInfo     \basetest\btsd.ini  
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS1
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS1
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS1
END_TESTCASE PBASE-SDTESTSPECFS1-0202

START_TESTCASE PBASE-SDTESTSPECFS2-0203
//!  @SYMTestCaseID PBASE-SDTESTSPECFS2-0203
//!  @SYMTestCaseDesc Inspect Partion Boot Sector (PBS) against the SD specifications
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Examine PBS
//!      4. Perform some file operations on the card
//!      5. Examine PBS
//!      6. Format card (Quick Format)
//!      7. Examine PBS
//!      8. Perform some file operations on the card
//!      9. Examine PBS
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      The PBS rigorously complies with the SD specifications at all times
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS2
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS2
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS2
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS2
END_TESTCASE PBASE-SDTESTSPECFS2-0203

START_TESTCASE PBASE-SDTESTSPECFS3-0204
//!  @SYMTestCaseID PBASE-SDTESTSPECFS3-0204
//!  @SYMTestCaseDesc Inspect File Allocation Table (FAT) after formatting (FAT12/16 only)
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Examine FAT
//!      4. Perform some file operations on the card
//!      6. Format card (Quick Format)
//!      7. Examine FAT
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      The FAT sectors are always blank after formatting
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS3
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS3
END_TESTCASE PBASE-SDTESTSPECFS3-0204

START_TESTCASE PBASE-SDTESTSPECFS4-0205
//!  @SYMTestCaseID PBASE-SDTESTSPECFS4-0205
//!  @SYMTestCaseDesc Inspect Root Directory after formatting (FAT12/16 only)
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Examine Root Directory
//!      4. Perform some file operations on the card
//!      6. Format card (Quick Format)
//!      7. Examine Root Directory
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      The Root Directory sectors are always blank after formatting
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS4
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS4
END_TESTCASE PBASE-SDTESTSPECFS4-0205

START_TESTCASE PBASE-SDTESTSPECFS5-0206
//!  @SYMTestCaseID PBASE-SDTESTSPECFS5-0206
//!  @SYMTestCaseDesc Inspect File System layout (FAT12/16) against the SD specifications
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Examine File System layout
//!      4. Perform some file operations on the card
//!      5. Examine File System layout
//!      6. Format card (Quick Format)
//!      7. Examine File System layout
//!      8. Perform some file operations on the card
//!      9. Examine File System layout
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      The File System layout rigorously complies with the SD specifications at all times
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS5
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS5
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS5
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FS5
END_TESTCASE PBASE-SDTESTSPECFS5-0206

START_TESTCASE PBASE-SDTESTSPECFAT32FSINFO-0215
//!  @SYMTestCaseID PBASE-SDTESTSPECFAT32FSINFO-0215
//!  @SYMTestCaseDesc Inspect File System Info Sector (FAT32 only) against the SD specifications
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Examine File System Info Sector
//!      4. Perform some file operations on the card
//!      5. Examine File System Info Sector
//!      6. Format card (Quick Format)
//!      7. Examine File System Info Sector
//!      8. Perform some file operations on the card
//!      9. Examine File System Info Sector
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      The File System Info Sector rigorously complies with the SD specifications at all times
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSINFO
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSINFO
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSINFO
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSINFO
END_TESTCASE PBASE-SDTESTSPECFAT32FSINFO-0215

START_TESTCASE PBASE-SDTESTSPECFAT32FSBACKUPSECTORS-0216
//!  @SYMTestCaseID PBASE-SDTESTSPECFAT32FSBACKUPSECTORS-0216
//!  @SYMTestCaseDesc Compare Partion Boot Sectors (PBS) and Backup Boot Sectors (BBS) (FAT32 only)
//!  @SYMREQ REQ0000
//!  @SYMTestActions
//!      1. Fill up the first sectors of the card with zeroes
//!      2. Format card (Full Format)
//!      3. Compare PBS and BBS
//!      4. Perform some file operations on the card
//!      5. Examine PBS and BBS
//!      6. Format card (Quick Format)
//!      7. Examine PBS and BBS
//!      8. Perform some file operations on the card
//!      9. Examine PBS and BBS
//!  @SYMTestExpectedResults
//!      All operations complete with no error
//!      PBS and BBS are always identical
//!  @SYMTestPriority High
//!  @SYMTestStatus Implemented
//!  @SYMTestType CIT
RUN_TEST_STEP 50   basetestsd FillSectors     \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini FullFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSBACKUPSECTORS
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSBACKUPSECTORS
RUN_TEST_STEP 500  basetestsd Format          \basetest\btsd.ini QuickFormat
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSBACKUPSECTORS
RUN_TEST_STEP 100  basetestsd FileOperations1 \basetest\btsd.ini SDTESTSPEC
RUN_TEST_STEP 50   basetestsd FieldCheck      \basetest\btsd.ini SDTESTSPEC_FAT32FSBACKUPSECTORS
END_TESTCASE PBASE-SDTESTSPECFAT32FSBACKUPSECTORS-0216