--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/linklayerprotocols/pppnif/data/pppd.ini	Tue Jan 26 15:23:49 2010 +0200
@@ -0,0 +1,70 @@
+; This file is read by PPP when configured for server mode
+; i.e. ISP_IF_SERVER_MODE is TRUE
+
+[lcp]
+; These entries affect all of LCP, CCP, IPCP and IPV6CP
+; Set to 1 to read the following entry
+PPPEnableMaxFailure= 0
+; Number of NAKs to receive before rejecting an option
+PPPMaxFailureCount= 5
+; Set to 1 to read the following entry
+PPPEnableMaxRestart= 0
+; Number of Configure-Request packets to send without getting a valid response
+PPPMaxRestartCount= 10
+; Set to 1 to read the following entry
+PPPEnableRestartTimer= 0
+; Timeout period in milliseconds
+PPPRestartPeriod= 3000
+; Set to 1 to enable sending Terminate Request per RFC 1661
+PPPEnableTerminateRequest= 1
+; Set to 1 to read the following entry
+PPPEnableMaxTerminateRequest= 1
+; Number of Terminate Requests to be sent
+PPPMaxTerminateRequestCount= 2
+; Set to 1 to read the following entry
+PPPEnableTerminateRequestTimer= 1
+; Time to Terminate Request retransmission in milliseconds
+PPPTerminateRequestPeriod= 3000
+; Set to 1 to enable sending Terminate Ack per RFC 1661
+PPPEnableTerminateAck= 1
+; Set to 1 to read the following entry
+PPPEnableTerminateAckTimer= 1
+; Terminate Ack timeout in milliseconds
+PPPTerminateAckPeriod= 3500
+
+[link]
+; Send buffer low water mark below which flow is turned on
+LoMark= 16
+; Send buffer high water mark above which flow is turned off
+HiMark= 32
+; Set to 1 to read the following entry
+PPPEnableAccm= 0
+; Negotiate this value for ACCM (XON/XOFF are added to this, if necessary)
+PPPAccm= 0
+; Set to 1 to read the following entry
+PPPEnableMru= 0
+; Negotiate this value for MRU (0=default)
+PPPMru= 0
+
+[link::comm::0]
+; These entries are only valid on ports matching the section name
+; and override the values in the [link] section.
+; Send buffer low water mark below which flow is turned on
+LoMark= 16
+; Send buffer high water mark above which flow is turned off
+HiMark= 32
+
+[lrd]
+; Set to 1 to read the following entry
+PPPEnableLRD= 0
+; Time between LCP echo requests in seconds
+PPPLRDPeriod= 10
+
+[log]
+; These entries are only valid in debug builds
+; Debug log level (0..5)
+level= 1
+; Format of binary log file (0=pppdump format)
+logFormat= 0
+; Type of packets to log (0=log all)
+linkFormat= 0