--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/persistentstorage/sql/SQLite/main.c Fri Jan 22 11:06:30 2010 +0200
@@ -0,0 +1,2005 @@
+/*
+** 2001 September 15
+**
+** The author disclaims copyright to this source code. In place of
+** a legal notice, here is a blessing:
+**
+** May you do good and not evil.
+** May you find forgiveness for yourself and forgive others.
+** May you share freely, never taking more than you give.
+**
+*************************************************************************
+** Main file for the SQLite library. The routines in this file
+** implement the programmer interface to the library. Routines in
+** other files are for internal use by SQLite and should not be
+** accessed by users of the library.
+**
+** $Id: main.c,v 1.486 2008/08/04 20:13:27 drh Exp $
+*/
+#include "sqliteInt.h"
+#include <ctype.h>
+
+#ifdef SQLITE_ENABLE_FTS3
+# include "fts3.h"
+#endif
+#ifdef SQLITE_ENABLE_RTREE
+# include "rtree.h"
+#endif
+
+/*
+** The version of the library
+*/
+const char sqlite3_version[] = SQLITE_VERSION;
+const char *sqlite3_libversion(void){ return sqlite3_version; }
+int sqlite3_libversion_number(void){ return SQLITE_VERSION_NUMBER; }
+int sqlite3_threadsafe(void){ return SQLITE_THREADSAFE; }
+
+#if !defined(SQLITE_OMIT_TRACE) && defined(SQLITE_ENABLE_IOTRACE)
+/*
+** If the following function pointer is not NULL and if
+** SQLITE_ENABLE_IOTRACE is enabled, then messages describing
+** I/O active are written using this function. These messages
+** are intended for debugging activity only.
+*/
+void (*sqlite3IoTrace)(const char*, ...) = 0;
+#endif
+
+/*
+** If the following global variable points to a string which is the
+** name of a directory, then that directory will be used to store
+** temporary files.
+**
+** See also the "PRAGMA temp_store_directory" SQL command.
+*/
+char *sqlite3_temp_directory = 0;
+
+/*
+** Initialize SQLite.
+**
+** This routine must be called to initialize the memory allocation,
+** VFS, and mutex subsystesms prior to doing any serious work with
+** SQLite. But as long as you do not compile with SQLITE_OMIT_AUTOINIT
+** this routine will be called automatically by key routines such as
+** sqlite3_open().
+**
+** This routine is a no-op except on its very first call for the process,
+** or for the first call after a call to sqlite3_shutdown.
+*/
+int sqlite3_initialize(void){
+ static int inProgress = 0;
+ int rc;
+
+ /* If SQLite is already initialized, this call is a no-op. */
+ if( sqlite3Config.isInit ) return SQLITE_OK;
+
+ /* Make sure the mutex system is initialized. */
+ rc = sqlite3MutexInit();
+
+ if( rc==SQLITE_OK ){
+
+ /* Initialize the malloc() system and the recursive pInitMutex mutex.
+ ** This operation is protected by the STATIC_MASTER mutex.
+ */
+ sqlite3_mutex *pMaster = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MASTER);
+ sqlite3_mutex_enter(pMaster);
+ if( !sqlite3Config.isMallocInit ){
+ rc = sqlite3MallocInit();
+ }
+ if( rc==SQLITE_OK ){
+ sqlite3Config.isMallocInit = 1;
+ if( !sqlite3Config.pInitMutex ){
+ sqlite3Config.pInitMutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE);
+ if( sqlite3Config.bCoreMutex && !sqlite3Config.pInitMutex ){
+ rc = SQLITE_NOMEM;
+ }
+ }
+ }
+ sqlite3_mutex_leave(pMaster);
+ if( rc!=SQLITE_OK ){
+ return rc;
+ }
+
+ /* Enter the recursive pInitMutex mutex. After doing so, if the
+ ** sqlite3Config.isInit flag is true, then some other thread has
+ ** finished doing the initialization. If the inProgress flag is
+ ** true, then this function is being called recursively from within
+ ** the sqlite3_os_init() call below. In either case, exit early.
+ */
+ sqlite3_mutex_enter(sqlite3Config.pInitMutex);
+ if( sqlite3Config.isInit || inProgress ){
+ sqlite3_mutex_leave(sqlite3Config.pInitMutex);
+ return SQLITE_OK;
+ }
+ sqlite3StatusReset();
+ inProgress = 1;
+ rc = sqlite3_os_init();
+ inProgress = 0;
+ sqlite3Config.isInit = (rc==SQLITE_OK ? 1 : 0);
+ sqlite3_mutex_leave(sqlite3Config.pInitMutex);
+ }
+
+ /* Check NaN support. */
+#ifndef NDEBUG
+ /* This section of code's only "output" is via assert() statements. */
+ if ( rc==SQLITE_OK ){
+ u64 x = (((u64)1)<<63)-1;
+ double y;
+ assert(sizeof(x)==8);
+ assert(sizeof(x)==sizeof(y));
+ memcpy(&y, &x, 8);
+ assert( sqlite3IsNaN(y) );
+ }
+#endif
+
+ return rc;
+}
+
+/*
+** Undo the effects of sqlite3_initialize(). Must not be called while
+** there are outstanding database connections or memory allocations or
+** while any part of SQLite is otherwise in use in any thread. This
+** routine is not threadsafe. Not by a long shot.
+*/
+int sqlite3_shutdown(void){
+ sqlite3_mutex_free(sqlite3Config.pInitMutex);
+ sqlite3Config.pInitMutex = 0;
+ sqlite3Config.isMallocInit = 0;
+ if( sqlite3Config.isInit ){
+ sqlite3_os_end();
+ }
+ if( sqlite3Config.m.xShutdown ){
+ sqlite3MallocEnd();
+ }
+ if( sqlite3Config.mutex.xMutexEnd ){
+ sqlite3MutexEnd();
+ }
+ sqlite3Config.isInit = 0;
+ return SQLITE_OK;
+}
+
+/*
+** This API allows applications to modify the global configuration of
+** the SQLite library at run-time.
+**
+** This routine should only be called when there are no outstanding
+** database connections or memory allocations. This routine is not
+** threadsafe. Failure to heed these warnings can lead to unpredictable
+** behavior.
+*/
+int sqlite3_config(int op, ...){
+ va_list ap;
+ int rc = SQLITE_OK;
+
+ /* sqlite3_config() shall return SQLITE_MISUSE if it is invoked while
+ ** the SQLite library is in use. */
+ if( sqlite3Config.isInit ) return SQLITE_MISUSE;
+
+ va_start(ap, op);
+ switch( op ){
+ case SQLITE_CONFIG_SINGLETHREAD: {
+ /* Disable all mutexing */
+ sqlite3Config.bCoreMutex = 0;
+ sqlite3Config.bFullMutex = 0;
+ break;
+ }
+ case SQLITE_CONFIG_MULTITHREAD: {
+ /* Disable mutexing of database connections */
+ /* Enable mutexing of core data structures */
+ sqlite3Config.bCoreMutex = 1;
+ sqlite3Config.bFullMutex = 0;
+ break;
+ }
+ case SQLITE_CONFIG_SERIALIZED: {
+ /* Enable all mutexing */
+ sqlite3Config.bCoreMutex = 1;
+ sqlite3Config.bFullMutex = 1;
+ break;
+ }
+ case SQLITE_CONFIG_MALLOC: {
+ /* Specify an alternative malloc implementation */
+ sqlite3Config.m = *va_arg(ap, sqlite3_mem_methods*);
+ break;
+ }
+ case SQLITE_CONFIG_GETMALLOC: {
+ /* Retrieve the current malloc() implementation */
+ if( sqlite3Config.m.xMalloc==0 ) sqlite3MemSetDefault();
+ *va_arg(ap, sqlite3_mem_methods*) = sqlite3Config.m;
+ break;
+ }
+ case SQLITE_CONFIG_MUTEX: {
+ /* Specify an alternative mutex implementation */
+ sqlite3Config.mutex = *va_arg(ap, sqlite3_mutex_methods*);
+ break;
+ }
+ case SQLITE_CONFIG_GETMUTEX: {
+ /* Retrieve the current mutex implementation */
+ *va_arg(ap, sqlite3_mutex_methods*) = sqlite3Config.mutex;
+ break;
+ }
+ case SQLITE_CONFIG_MEMSTATUS: {
+ /* Enable or disable the malloc status collection */
+ sqlite3Config.bMemstat = va_arg(ap, int);
+ break;
+ }
+ case SQLITE_CONFIG_SCRATCH: {
+ /* Designate a buffer for scratch memory space */
+ sqlite3Config.pScratch = va_arg(ap, void*);
+ sqlite3Config.szScratch = va_arg(ap, int);
+ sqlite3Config.nScratch = va_arg(ap, int);
+ break;
+ }
+ case SQLITE_CONFIG_PAGECACHE: {
+ /* Designate a buffer for scratch memory space */
+ sqlite3Config.pPage = va_arg(ap, void*);
+ sqlite3Config.szPage = va_arg(ap, int);
+ sqlite3Config.nPage = va_arg(ap, int);
+ break;
+ }
+
+#if defined(SQLITE_ENABLE_MEMSYS3) || defined(SQLITE_ENABLE_MEMSYS5)
+ case SQLITE_CONFIG_HEAP: {
+ /* Designate a buffer for heap memory space */
+ sqlite3Config.pHeap = va_arg(ap, void*);
+ sqlite3Config.nHeap = va_arg(ap, int);
+ sqlite3Config.mnReq = va_arg(ap, int);
+
+ if( sqlite3Config.pHeap==0 ){
+ /* If the heap pointer is NULL, then restore the malloc implementation
+ ** back to NULL pointers too. This will cause the malloc to go
+ ** back to its default implementation when sqlite3_initialize() is
+ ** run.
+ */
+ memset(&sqlite3Config.m, 0, sizeof(sqlite3Config.m));
+ }else{
+ /* The heap pointer is not NULL, then install one of the
+ ** mem5.c/mem3.c methods. If neither ENABLE_MEMSYS3 nor
+ ** ENABLE_MEMSYS5 is defined, return an error.
+ ** the default case and return an error.
+ */
+#ifdef SQLITE_ENABLE_MEMSYS3
+ sqlite3Config.m = *sqlite3MemGetMemsys3();
+#endif
+#ifdef SQLITE_ENABLE_MEMSYS5
+ sqlite3Config.m = *sqlite3MemGetMemsys5();
+#endif
+ }
+ break;
+ }
+#endif
+
+#if defined(SQLITE_ENABLE_MEMSYS6)
+ case SQLITE_CONFIG_CHUNKALLOC: {
+ sqlite3Config.nSmall = va_arg(ap, int);
+ sqlite3Config.m = *sqlite3MemGetMemsys6();
+ break;
+ }
+#endif
+
+ case SQLITE_CONFIG_LOOKASIDE: {
+ sqlite3Config.szLookaside = va_arg(ap, int);
+ sqlite3Config.nLookaside = va_arg(ap, int);
+ break;
+ }
+
+ default: {
+ rc = SQLITE_ERROR;
+ break;
+ }
+ }
+ va_end(ap);
+ return rc;
+}
+
+/*
+** Set up the lookaside buffers for a database connection.
+** Return SQLITE_OK on success.
+** If lookaside is already active, return SQLITE_BUSY.
+**
+** The sz parameter is the number of bytes in each lookaside slot.
+** The cnt parameter is the number of slots. If pStart is NULL the
+** space for the lookaside memory is obtained from sqlite3_malloc().
+** If pStart is not NULL then it is sz*cnt bytes of memory to use for
+** the lookaside memory.
+*/
+static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){
+ void *pStart;
+ if( db->lookaside.nOut ){
+ return SQLITE_BUSY;
+ }
+ if( sz<0 ) sz = 0;
+ if( cnt<0 ) cnt = 0;
+ sz = (sz+7)&~7;
+ if( pBuf==0 ){
+ sqlite3BeginBenignMalloc();
+ pStart = sqlite3Malloc( sz*cnt );
+ sqlite3EndBenignMalloc();
+ }else{
+ pStart = pBuf;
+ }
+ if( db->lookaside.bMalloced ){
+ sqlite3_free(db->lookaside.pStart);
+ }
+ db->lookaside.pStart = pStart;
+ db->lookaside.pFree = 0;
+ db->lookaside.sz = sz;
+ db->lookaside.bMalloced = pBuf==0;
+ if( pStart ){
+ int i;
+ LookasideSlot *p;
+ p = (LookasideSlot*)pStart;
+ for(i=cnt-1; i>=0; i--){
+ p->pNext = db->lookaside.pFree;
+ db->lookaside.pFree = p;
+ p = (LookasideSlot*)&((u8*)p)[sz];
+ }
+ db->lookaside.pEnd = p;
+ db->lookaside.bEnabled = 1;
+ }else{
+ db->lookaside.pEnd = 0;
+ db->lookaside.bEnabled = 0;
+ }
+ return SQLITE_OK;
+}
+
+/*
+** Configuration settings for an individual database connection
+*/
+int sqlite3_db_config(sqlite3 *db, int op, ...){
+ va_list ap;
+ int rc;
+ va_start(ap, op);
+ switch( op ){
+ case SQLITE_DBCONFIG_LOOKASIDE: {
+ void *pBuf = va_arg(ap, void*);
+ int sz = va_arg(ap, int);
+ int cnt = va_arg(ap, int);
+ rc = setupLookaside(db, pBuf, sz, cnt);
+ break;
+ }
+ default: {
+ rc = SQLITE_ERROR;
+ break;
+ }
+ }
+ va_end(ap);
+ return rc;
+}
+
+/*
+** Routine needed to support the testcase() macro.
+*/
+#ifdef SQLITE_COVERAGE_TEST
+void sqlite3Coverage(int x){
+ static int dummy = 0;
+ dummy += x;
+}
+#endif
+
+
+/*
+** Return true if the buffer z[0..n-1] contains all spaces.
+*/
+static int allSpaces(const char *z, int n){
+ while( n>0 && z[n-1]==' ' ){ n--; }
+ return n==0;
+}
+
+/*
+** This is the default collating function named "BINARY" which is always
+** available.
+**
+** If the padFlag argument is not NULL then space padding at the end
+** of strings is ignored. This implements the RTRIM collation.
+*/
+static int binCollFunc(
+ void *padFlag,
+ int nKey1, const void *pKey1,
+ int nKey2, const void *pKey2
+){
+ int rc, n;
+ n = nKey1<nKey2 ? nKey1 : nKey2;
+ rc = memcmp(pKey1, pKey2, n);
+ if( rc==0 ){
+ if( padFlag
+ && allSpaces(((char*)pKey1)+n, nKey1-n)
+ && allSpaces(((char*)pKey2)+n, nKey2-n)
+ ){
+ /* Leave rc unchanged at 0 */
+ }else{
+ rc = nKey1 - nKey2;
+ }
+ }
+ return rc;
+}
+
+/*
+** Another built-in collating sequence: NOCASE.
+**
+** This collating sequence is intended to be used for "case independant
+** comparison". SQLite's knowledge of upper and lower case equivalents
+** extends only to the 26 characters used in the English language.
+**
+** At the moment there is only a UTF-8 implementation.
+*/
+static int nocaseCollatingFunc(
+ void *NotUsed,
+ int nKey1, const void *pKey1,
+ int nKey2, const void *pKey2
+){
+ int r = sqlite3StrNICmp(
+ (const char *)pKey1, (const char *)pKey2, (nKey1<nKey2)?nKey1:nKey2);
+ if( 0==r ){
+ r = nKey1-nKey2;
+ }
+ return r;
+}
+
+/*
+** Return the ROWID of the most recent insert
+*/
+sqlite_int64 sqlite3_last_insert_rowid(sqlite3 *db){
+ return db->lastRowid;
+}
+
+/*
+** Return the number of changes in the most recent call to sqlite3_exec().
+*/
+int sqlite3_changes(sqlite3 *db){
+ return db->nChange;
+}
+
+/*
+** Return the number of changes since the database handle was opened.
+*/
+int sqlite3_total_changes(sqlite3 *db){
+ return db->nTotalChange;
+}
+
+/*
+** Close an existing SQLite database
+*/
+int sqlite3_close(sqlite3 *db){
+ HashElem *i;
+ int j;
+
+ if( !db ){
+ return SQLITE_OK;
+ }
+ if( !sqlite3SafetyCheckSickOrOk(db) ){
+ return SQLITE_MISUSE;
+ }
+ sqlite3_mutex_enter(db->mutex);
+
+#ifdef SQLITE_SSE
+ {
+ extern void sqlite3SseCleanup(sqlite3*);
+ sqlite3SseCleanup(db);
+ }
+#endif
+
+ sqlite3ResetInternalSchema(db, 0);
+
+ /* If a transaction is open, the ResetInternalSchema() call above
+ ** will not have called the xDisconnect() method on any virtual
+ ** tables in the db->aVTrans[] array. The following sqlite3VtabRollback()
+ ** call will do so. We need to do this before the check for active
+ ** SQL statements below, as the v-table implementation may be storing
+ ** some prepared statements internally.
+ */
+ sqlite3VtabRollback(db);
+
+ /* If there are any outstanding VMs, return SQLITE_BUSY. */
+ if( db->pVdbe ){
+ sqlite3Error(db, SQLITE_BUSY,
+ "Unable to close due to unfinalised statements");
+ sqlite3_mutex_leave(db->mutex);
+ return SQLITE_BUSY;
+ }
+ assert( sqlite3SafetyCheckSickOrOk(db) );
+
+ for(j=0; j<db->nDb; j++){
+ struct Db *pDb = &db->aDb[j];
+ if( pDb->pBt ){
+ sqlite3BtreeClose(pDb->pBt);
+ pDb->pBt = 0;
+ if( j!=1 ){
+ pDb->pSchema = 0;
+ }
+ }
+ }
+ sqlite3ResetInternalSchema(db, 0);
+ assert( db->nDb<=2 );
+ assert( db->aDb==db->aDbStatic );
+ for(i=sqliteHashFirst(&db->aFunc); i; i=sqliteHashNext(i)){
+ FuncDef *pFunc, *pNext;
+ for(pFunc = (FuncDef*)sqliteHashData(i); pFunc; pFunc=pNext){
+ pNext = pFunc->pNext;
+ sqlite3DbFree(db, pFunc);
+ }
+ }
+
+ for(i=sqliteHashFirst(&db->aCollSeq); i; i=sqliteHashNext(i)){
+ CollSeq *pColl = (CollSeq *)sqliteHashData(i);
+ /* Invoke any destructors registered for collation sequence user data. */
+ for(j=0; j<3; j++){
+ if( pColl[j].xDel ){
+ pColl[j].xDel(pColl[j].pUser);
+ }
+ }
+ sqlite3DbFree(db, pColl);
+ }
+ sqlite3HashClear(&db->aCollSeq);
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+ for(i=sqliteHashFirst(&db->aModule); i; i=sqliteHashNext(i)){
+ Module *pMod = (Module *)sqliteHashData(i);
+ if( pMod->xDestroy ){
+ pMod->xDestroy(pMod->pAux);
+ }
+ sqlite3DbFree(db, pMod);
+ }
+ sqlite3HashClear(&db->aModule);
+#endif
+
+ sqlite3HashClear(&db->aFunc);
+ sqlite3Error(db, SQLITE_OK, 0); /* Deallocates any cached error strings. */
+ if( db->pErr ){
+ sqlite3ValueFree(db->pErr);
+ }
+ sqlite3CloseExtensions(db);
+
+ db->magic = SQLITE_MAGIC_ERROR;
+
+ /* The temp-database schema is allocated differently from the other schema
+ ** objects (using sqliteMalloc() directly, instead of sqlite3BtreeSchema()).
+ ** So it needs to be freed here. Todo: Why not roll the temp schema into
+ ** the same sqliteMalloc() as the one that allocates the database
+ ** structure?
+ */
+ sqlite3DbFree(db, db->aDb[1].pSchema);
+ sqlite3_mutex_leave(db->mutex);
+ db->magic = SQLITE_MAGIC_CLOSED;
+ sqlite3_mutex_free(db->mutex);
+ if( db->lookaside.bMalloced ){
+ sqlite3_free(db->lookaside.pStart);
+ }
+ sqlite3_free(db);
+ return SQLITE_OK;
+}
+
+/*
+** Rollback all database files.
+*/
+void sqlite3RollbackAll(sqlite3 *db){
+ int i;
+ int inTrans = 0;
+ assert( sqlite3_mutex_held(db->mutex) );
+ sqlite3BeginBenignMalloc();
+ for(i=0; i<db->nDb; i++){
+ if( db->aDb[i].pBt ){
+ if( sqlite3BtreeIsInTrans(db->aDb[i].pBt) ){
+ inTrans = 1;
+ }
+ sqlite3BtreeRollback(db->aDb[i].pBt);
+ db->aDb[i].inTrans = 0;
+ }
+ }
+ sqlite3VtabRollback(db);
+ sqlite3EndBenignMalloc();
+
+ if( db->flags&SQLITE_InternChanges ){
+ sqlite3ExpirePreparedStatements(db);
+ sqlite3ResetInternalSchema(db, 0);
+ }
+
+ /* If one has been configured, invoke the rollback-hook callback */
+ if( db->xRollbackCallback && (inTrans || !db->autoCommit) ){
+ db->xRollbackCallback(db->pRollbackArg);
+ }
+}
+
+/*
+** Return a static string that describes the kind of error specified in the
+** argument.
+*/
+const char *sqlite3ErrStr(int rc){
+ const char *z;
+ switch( rc & 0xff ){
+ case SQLITE_ROW:
+ case SQLITE_DONE:
+ case SQLITE_OK: z = "not an error"; break;
+ case SQLITE_ERROR: z = "SQL logic error or missing database"; break;
+ case SQLITE_PERM: z = "access permission denied"; break;
+ case SQLITE_ABORT: z = "callback requested query abort"; break;
+ case SQLITE_BUSY: z = "database is locked"; break;
+ case SQLITE_LOCKED: z = "database table is locked"; break;
+ case SQLITE_NOMEM: z = "out of memory"; break;
+ case SQLITE_READONLY: z = "attempt to write a readonly database"; break;
+ case SQLITE_INTERRUPT: z = "interrupted"; break;
+ case SQLITE_IOERR: z = "disk I/O error"; break;
+ case SQLITE_CORRUPT: z = "database disk image is malformed"; break;
+ case SQLITE_FULL: z = "database or disk is full"; break;
+ case SQLITE_CANTOPEN: z = "unable to open database file"; break;
+ case SQLITE_EMPTY: z = "table contains no data"; break;
+ case SQLITE_SCHEMA: z = "database schema has changed"; break;
+ case SQLITE_TOOBIG: z = "String or BLOB exceeded size limit"; break;
+ case SQLITE_CONSTRAINT: z = "constraint failed"; break;
+ case SQLITE_MISMATCH: z = "datatype mismatch"; break;
+ case SQLITE_MISUSE: z = "library routine called out of sequence";break;
+ case SQLITE_NOLFS: z = "large file support is disabled"; break;
+ case SQLITE_AUTH: z = "authorization denied"; break;
+ case SQLITE_FORMAT: z = "auxiliary database format error"; break;
+ case SQLITE_RANGE: z = "bind or column index out of range"; break;
+ case SQLITE_NOTADB: z = "file is encrypted or is not a database";break;
+ default: z = "unknown error"; break;
+ }
+ return z;
+}
+
+/*
+** This routine implements a busy callback that sleeps and tries
+** again until a timeout value is reached. The timeout value is
+** an integer number of milliseconds passed in as the first
+** argument.
+*/
+static int sqliteDefaultBusyCallback(
+ void *ptr, /* Database connection */
+ int count /* Number of times table has been busy */
+){
+#if SQLITE_OS_WIN || (defined(HAVE_USLEEP) && HAVE_USLEEP)
+ static const u8 delays[] =
+ { 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 };
+ static const u8 totals[] =
+ { 0, 1, 3, 8, 18, 33, 53, 78, 103, 128, 178, 228 };
+# define NDELAY (sizeof(delays)/sizeof(delays[0]))
+ sqlite3 *db = (sqlite3 *)ptr;
+ int timeout = db->busyTimeout;
+ int delay, prior;
+
+ assert( count>=0 );
+ if( count < NDELAY ){
+ delay = delays[count];
+ prior = totals[count];
+ }else{
+ delay = delays[NDELAY-1];
+ prior = totals[NDELAY-1] + delay*(count-(NDELAY-1));
+ }
+ if( prior + delay > timeout ){
+ delay = timeout - prior;
+ if( delay<=0 ) return 0;
+ }
+ sqlite3OsSleep(db->pVfs, delay*1000);
+ return 1;
+#else
+ sqlite3 *db = (sqlite3 *)ptr;
+ int timeout = ((sqlite3 *)ptr)->busyTimeout;
+ if( (count+1)*1000 > timeout ){
+ return 0;
+ }
+ sqlite3OsSleep(db->pVfs, 1000000);
+ return 1;
+#endif
+}
+
+/*
+** Invoke the given busy handler.
+**
+** This routine is called when an operation failed with a lock.
+** If this routine returns non-zero, the lock is retried. If it
+** returns 0, the operation aborts with an SQLITE_BUSY error.
+*/
+int sqlite3InvokeBusyHandler(BusyHandler *p){
+ int rc;
+ if( NEVER(p==0) || p->xFunc==0 || p->nBusy<0 ) return 0;
+ rc = p->xFunc(p->pArg, p->nBusy);
+ if( rc==0 ){
+ p->nBusy = -1;
+ }else{
+ p->nBusy++;
+ }
+ return rc;
+}
+
+/*
+** This routine sets the busy callback for an Sqlite database to the
+** given callback function with the given argument.
+*/
+int sqlite3_busy_handler(
+ sqlite3 *db,
+ int (*xBusy)(void*,int),
+ void *pArg
+){
+ sqlite3_mutex_enter(db->mutex);
+ db->busyHandler.xFunc = xBusy;
+ db->busyHandler.pArg = pArg;
+ db->busyHandler.nBusy = 0;
+ sqlite3_mutex_leave(db->mutex);
+ return SQLITE_OK;
+}
+
+#ifndef SQLITE_OMIT_PROGRESS_CALLBACK
+/*
+** This routine sets the progress callback for an Sqlite database to the
+** given callback function with the given argument. The progress callback will
+** be invoked every nOps opcodes.
+*/
+void sqlite3_progress_handler(
+ sqlite3 *db,
+ int nOps,
+ int (*xProgress)(void*),
+ void *pArg
+){
+ sqlite3_mutex_enter(db->mutex);
+ if( nOps>0 ){
+ db->xProgress = xProgress;
+ db->nProgressOps = nOps;
+ db->pProgressArg = pArg;
+ }else{
+ db->xProgress = 0;
+ db->nProgressOps = 0;
+ db->pProgressArg = 0;
+ }
+ sqlite3_mutex_leave(db->mutex);
+}
+#endif
+
+
+/*
+** This routine installs a default busy handler that waits for the
+** specified number of milliseconds before returning 0.
+*/
+int sqlite3_busy_timeout(sqlite3 *db, int ms){
+ if( ms>0 ){
+ db->busyTimeout = ms;
+ sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db);
+ }else{
+ sqlite3_busy_handler(db, 0, 0);
+ }
+ return SQLITE_OK;
+}
+
+/*
+** Cause any pending operation to stop at its earliest opportunity.
+*/
+void sqlite3_interrupt(sqlite3 *db){
+ db->u1.isInterrupted = 1;
+}
+
+
+/*
+** This function is exactly the same as sqlite3_create_function(), except
+** that it is designed to be called by internal code. The difference is
+** that if a malloc() fails in sqlite3_create_function(), an error code
+** is returned and the mallocFailed flag cleared.
+*/
+int sqlite3CreateFunc(
+ sqlite3 *db,
+ const char *zFunctionName,
+ int nArg,
+ int enc,
+ void *pUserData,
+ void (*xFunc)(sqlite3_context*,int,sqlite3_value **),
+ void (*xStep)(sqlite3_context*,int,sqlite3_value **),
+ void (*xFinal)(sqlite3_context*)
+){
+ FuncDef *p;
+ int nName;
+
+ assert( sqlite3_mutex_held(db->mutex) );
+ if( zFunctionName==0 ||
+ (xFunc && (xFinal || xStep)) ||
+ (!xFunc && (xFinal && !xStep)) ||
+ (!xFunc && (!xFinal && xStep)) ||
+ (nArg<-1 || nArg>SQLITE_MAX_FUNCTION_ARG) ||
+ (255<(nName = sqlite3Strlen(db, zFunctionName))) ){
+ sqlite3Error(db, SQLITE_ERROR, "bad parameters");
+ return SQLITE_ERROR;
+ }
+
+#ifndef SQLITE_OMIT_UTF16
+ /* If SQLITE_UTF16 is specified as the encoding type, transform this
+ ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the
+ ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally.
+ **
+ ** If SQLITE_ANY is specified, add three versions of the function
+ ** to the hash table.
+ */
+ if( enc==SQLITE_UTF16 ){
+ enc = SQLITE_UTF16NATIVE;
+ }else if( enc==SQLITE_ANY ){
+ int rc;
+ rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF8,
+ pUserData, xFunc, xStep, xFinal);
+ if( rc==SQLITE_OK ){
+ rc = sqlite3CreateFunc(db, zFunctionName, nArg, SQLITE_UTF16LE,
+ pUserData, xFunc, xStep, xFinal);
+ }
+ if( rc!=SQLITE_OK ){
+ return rc;
+ }
+ enc = SQLITE_UTF16BE;
+ }
+#else
+ enc = SQLITE_UTF8;
+#endif
+
+ /* Check if an existing function is being overridden or deleted. If so,
+ ** and there are active VMs, then return SQLITE_BUSY. If a function
+ ** is being overridden/deleted but there are no active VMs, allow the
+ ** operation to continue but invalidate all precompiled statements.
+ */
+ p = sqlite3FindFunction(db, zFunctionName, nName, nArg, enc, 0);
+ if( p && p->iPrefEnc==enc && p->nArg==nArg ){
+ if( db->activeVdbeCnt ){
+ sqlite3Error(db, SQLITE_BUSY,
+ "Unable to delete/modify user-function due to active statements");
+ assert( !db->mallocFailed );
+ return SQLITE_BUSY;
+ }else{
+ sqlite3ExpirePreparedStatements(db);
+ }
+ }
+
+ p = sqlite3FindFunction(db, zFunctionName, nName, nArg, enc, 1);
+ assert(p || db->mallocFailed);
+ if( !p ){
+ return SQLITE_NOMEM;
+ }
+ p->flags = 0;
+ p->xFunc = xFunc;
+ p->xStep = xStep;
+ p->xFinalize = xFinal;
+ p->pUserData = pUserData;
+ p->nArg = nArg;
+ return SQLITE_OK;
+}
+
+/*
+** Create new user functions.
+*/
+int sqlite3_create_function(
+ sqlite3 *db,
+ const char *zFunctionName,
+ int nArg,
+ int enc,
+ void *p,
+ void (*xFunc)(sqlite3_context*,int,sqlite3_value **),
+ void (*xStep)(sqlite3_context*,int,sqlite3_value **),
+ void (*xFinal)(sqlite3_context*)
+){
+ int rc;
+ sqlite3_mutex_enter(db->mutex);
+ rc = sqlite3CreateFunc(db, zFunctionName, nArg, enc, p, xFunc, xStep, xFinal);
+ rc = sqlite3ApiExit(db, rc);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+
+#ifndef SQLITE_OMIT_UTF16
+int sqlite3_create_function16(
+ sqlite3 *db,
+ const void *zFunctionName,
+ int nArg,
+ int eTextRep,
+ void *p,
+ void (*xFunc)(sqlite3_context*,int,sqlite3_value**),
+ void (*xStep)(sqlite3_context*,int,sqlite3_value**),
+ void (*xFinal)(sqlite3_context*)
+){
+ int rc;
+ char *zFunc8;
+ sqlite3_mutex_enter(db->mutex);
+ assert( !db->mallocFailed );
+ zFunc8 = sqlite3Utf16to8(db, zFunctionName, -1);
+ rc = sqlite3CreateFunc(db, zFunc8, nArg, eTextRep, p, xFunc, xStep, xFinal);
+ sqlite3DbFree(db, zFunc8);
+ rc = sqlite3ApiExit(db, rc);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+#endif
+
+
+/*
+** Declare that a function has been overloaded by a virtual table.
+**
+** If the function already exists as a regular global function, then
+** this routine is a no-op. If the function does not exist, then create
+** a new one that always throws a run-time error.
+**
+** When virtual tables intend to provide an overloaded function, they
+** should call this routine to make sure the global function exists.
+** A global function must exist in order for name resolution to work
+** properly.
+*/
+int sqlite3_overload_function(
+ sqlite3 *db,
+ const char *zName,
+ int nArg
+){
+ int nName = sqlite3Strlen(db, zName);
+ int rc;
+ sqlite3_mutex_enter(db->mutex);
+ if( sqlite3FindFunction(db, zName, nName, nArg, SQLITE_UTF8, 0)==0 ){
+ sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8,
+ 0, sqlite3InvalidFunction, 0, 0);
+ }
+ rc = sqlite3ApiExit(db, SQLITE_OK);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+
+#ifndef SQLITE_OMIT_TRACE
+/*
+** Register a trace function. The pArg from the previously registered trace
+** is returned.
+**
+** A NULL trace function means that no tracing is executes. A non-NULL
+** trace is a pointer to a function that is invoked at the start of each
+** SQL statement.
+*/
+void *sqlite3_trace(sqlite3 *db, void (*xTrace)(void*,const char*), void *pArg){
+ void *pOld;
+ sqlite3_mutex_enter(db->mutex);
+ pOld = db->pTraceArg;
+ db->xTrace = xTrace;
+ db->pTraceArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return pOld;
+}
+/*
+** Register a profile function. The pArg from the previously registered
+** profile function is returned.
+**
+** A NULL profile function means that no profiling is executes. A non-NULL
+** profile is a pointer to a function that is invoked at the conclusion of
+** each SQL statement that is run.
+*/
+void *sqlite3_profile(
+ sqlite3 *db,
+ void (*xProfile)(void*,const char*,sqlite_uint64),
+ void *pArg
+){
+ void *pOld;
+ sqlite3_mutex_enter(db->mutex);
+ pOld = db->pProfileArg;
+ db->xProfile = xProfile;
+ db->pProfileArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return pOld;
+}
+#endif /* SQLITE_OMIT_TRACE */
+
+/*** EXPERIMENTAL ***
+**
+** Register a function to be invoked when a transaction comments.
+** If the invoked function returns non-zero, then the commit becomes a
+** rollback.
+*/
+void *sqlite3_commit_hook(
+ sqlite3 *db, /* Attach the hook to this database */
+ int (*xCallback)(void*), /* Function to invoke on each commit */
+ void *pArg /* Argument to the function */
+){
+ void *pOld;
+ sqlite3_mutex_enter(db->mutex);
+ pOld = db->pCommitArg;
+ db->xCommitCallback = xCallback;
+ db->pCommitArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return pOld;
+}
+
+/*
+** Register a callback to be invoked each time a row is updated,
+** inserted or deleted using this database connection.
+*/
+void *sqlite3_update_hook(
+ sqlite3 *db, /* Attach the hook to this database */
+ void (*xCallback)(void*,int,char const *,char const *,sqlite_int64),
+ void *pArg /* Argument to the function */
+){
+ void *pRet;
+ sqlite3_mutex_enter(db->mutex);
+ pRet = db->pUpdateArg;
+ db->xUpdateCallback = xCallback;
+ db->pUpdateArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return pRet;
+}
+
+/*
+** Register a callback to be invoked each time a transaction is rolled
+** back by this database connection.
+*/
+void *sqlite3_rollback_hook(
+ sqlite3 *db, /* Attach the hook to this database */
+ void (*xCallback)(void*), /* Callback function */
+ void *pArg /* Argument to the function */
+){
+ void *pRet;
+ sqlite3_mutex_enter(db->mutex);
+ pRet = db->pRollbackArg;
+ db->xRollbackCallback = xCallback;
+ db->pRollbackArg = pArg;
+ sqlite3_mutex_leave(db->mutex);
+ return pRet;
+}
+
+/*
+** This routine is called to create a connection to a database BTree
+** driver. If zFilename is the name of a file, then that file is
+** opened and used. If zFilename is the magic name ":memory:" then
+** the database is stored in memory (and is thus forgotten as soon as
+** the connection is closed.) If zFilename is NULL then the database
+** is a "virtual" database for transient use only and is deleted as
+** soon as the connection is closed.
+**
+** A virtual database can be either a disk file (that is automatically
+** deleted when the file is closed) or it an be held entirely in memory,
+** depending on the values of the SQLITE_TEMP_STORE compile-time macro and the
+** db->temp_store variable, according to the following chart:
+**
+** SQLITE_TEMP_STORE db->temp_store Location of temporary database
+** ----------------- -------------- ------------------------------
+** 0 any file
+** 1 1 file
+** 1 2 memory
+** 1 0 file
+** 2 1 file
+** 2 2 memory
+** 2 0 memory
+** 3 any memory
+*/
+int sqlite3BtreeFactory(
+ const sqlite3 *db, /* Main database when opening aux otherwise 0 */
+ const char *zFilename, /* Name of the file containing the BTree database */
+ int omitJournal, /* if TRUE then do not journal this file */
+ int nCache, /* How many pages in the page cache */
+ int vfsFlags, /* Flags passed through to vfsOpen */
+ Btree **ppBtree /* Pointer to new Btree object written here */
+){
+ int btFlags = 0;
+ int rc;
+
+ assert( sqlite3_mutex_held(db->mutex) );
+ assert( ppBtree != 0);
+ if( omitJournal ){
+ btFlags |= BTREE_OMIT_JOURNAL;
+ }
+ if( db->flags & SQLITE_NoReadlock ){
+ btFlags |= BTREE_NO_READLOCK;
+ }
+ if( zFilename==0 ){
+#if SQLITE_TEMP_STORE==0
+ /* Do nothing */
+#endif
+#ifndef SQLITE_OMIT_MEMORYDB
+#if SQLITE_TEMP_STORE==1
+ if( db->temp_store==2 ) zFilename = ":memory:";
+#endif
+#if SQLITE_TEMP_STORE==2
+ if( db->temp_store!=1 ) zFilename = ":memory:";
+#endif
+#if SQLITE_TEMP_STORE==3
+ zFilename = ":memory:";
+#endif
+#endif /* SQLITE_OMIT_MEMORYDB */
+ }
+
+ if( (vfsFlags & SQLITE_OPEN_MAIN_DB)!=0 && (zFilename==0 || *zFilename==0) ){
+ vfsFlags = (vfsFlags & ~SQLITE_OPEN_MAIN_DB) | SQLITE_OPEN_TEMP_DB;
+ }
+ rc = sqlite3BtreeOpen(zFilename, (sqlite3 *)db, ppBtree, btFlags, vfsFlags);
+
+ /* If the B-Tree was successfully opened, set the pager-cache size to the
+ ** default value. Except, if the call to BtreeOpen() returned a handle
+ ** open on an existing shared pager-cache, do not change the pager-cache
+ ** size.
+ */
+ if( rc==SQLITE_OK && 0==sqlite3BtreeSchema(*ppBtree, 0, 0) ){
+ sqlite3BtreeSetCacheSize(*ppBtree, nCache);
+ }
+ return rc;
+}
+
+/*
+** Return UTF-8 encoded English language explanation of the most recent
+** error.
+*/
+const char *sqlite3_errmsg(sqlite3 *db){
+ const char *z;
+ if( !db ){
+ return sqlite3ErrStr(SQLITE_NOMEM);
+ }
+ if( !sqlite3SafetyCheckSickOrOk(db) ){
+ return sqlite3ErrStr(SQLITE_MISUSE);
+ }
+ sqlite3_mutex_enter(db->mutex);
+ assert( !db->mallocFailed );
+ z = (char*)sqlite3_value_text(db->pErr);
+ assert( !db->mallocFailed );
+ if( z==0 ){
+ z = sqlite3ErrStr(db->errCode);
+ }
+ sqlite3_mutex_leave(db->mutex);
+ return z;
+}
+
+#ifndef SQLITE_OMIT_UTF16
+/*
+** Return UTF-16 encoded English language explanation of the most recent
+** error.
+*/
+const void *sqlite3_errmsg16(sqlite3 *db){
+ /* Because all the characters in the string are in the unicode
+ ** range 0x00-0xFF, if we pad the big-endian string with a
+ ** zero byte, we can obtain the little-endian string with
+ ** &big_endian[1].
+ */
+ static const char outOfMemBe[] = {
+ 0, 'o', 0, 'u', 0, 't', 0, ' ',
+ 0, 'o', 0, 'f', 0, ' ',
+ 0, 'm', 0, 'e', 0, 'm', 0, 'o', 0, 'r', 0, 'y', 0, 0, 0
+ };
+ static const char misuseBe [] = {
+ 0, 'l', 0, 'i', 0, 'b', 0, 'r', 0, 'a', 0, 'r', 0, 'y', 0, ' ',
+ 0, 'r', 0, 'o', 0, 'u', 0, 't', 0, 'i', 0, 'n', 0, 'e', 0, ' ',
+ 0, 'c', 0, 'a', 0, 'l', 0, 'l', 0, 'e', 0, 'd', 0, ' ',
+ 0, 'o', 0, 'u', 0, 't', 0, ' ',
+ 0, 'o', 0, 'f', 0, ' ',
+ 0, 's', 0, 'e', 0, 'q', 0, 'u', 0, 'e', 0, 'n', 0, 'c', 0, 'e', 0, 0, 0
+ };
+
+ const void *z;
+ if( !db ){
+ return (void *)(&outOfMemBe[SQLITE_UTF16NATIVE==SQLITE_UTF16LE?1:0]);
+ }
+ if( !sqlite3SafetyCheckSickOrOk(db) ){
+ return (void *)(&misuseBe[SQLITE_UTF16NATIVE==SQLITE_UTF16LE?1:0]);
+ }
+ sqlite3_mutex_enter(db->mutex);
+ assert( !db->mallocFailed );
+ z = sqlite3_value_text16(db->pErr);
+ if( z==0 ){
+ sqlite3ValueSetStr(db->pErr, -1, sqlite3ErrStr(db->errCode),
+ SQLITE_UTF8, SQLITE_STATIC);
+ z = sqlite3_value_text16(db->pErr);
+ }
+ /* A malloc() may have failed within the call to sqlite3_value_text16()
+ ** above. If this is the case, then the db->mallocFailed flag needs to
+ ** be cleared before returning. Do this directly, instead of via
+ ** sqlite3ApiExit(), to avoid setting the database handle error message.
+ */
+ db->mallocFailed = 0;
+ sqlite3_mutex_leave(db->mutex);
+ return z;
+}
+#endif /* SQLITE_OMIT_UTF16 */
+
+/*
+** Return the most recent error code generated by an SQLite routine. If NULL is
+** passed to this function, we assume a malloc() failed during sqlite3_open().
+*/
+int sqlite3_errcode(sqlite3 *db){
+ if( db && !sqlite3SafetyCheckSickOrOk(db) ){
+ return SQLITE_MISUSE;
+ }
+ if( !db || db->mallocFailed ){
+ return SQLITE_NOMEM;
+ }
+ return db->errCode & db->errMask;
+}
+
+/*
+** Create a new collating function for database "db". The name is zName
+** and the encoding is enc.
+*/
+static int createCollation(
+ sqlite3* db,
+ const char *zName,
+ int enc,
+ void* pCtx,
+ int(*xCompare)(void*,int,const void*,int,const void*),
+ void(*xDel)(void*)
+){
+ CollSeq *pColl;
+ int enc2;
+ int nName;
+
+ assert( sqlite3_mutex_held(db->mutex) );
+
+ /* If SQLITE_UTF16 is specified as the encoding type, transform this
+ ** to one of SQLITE_UTF16LE or SQLITE_UTF16BE using the
+ ** SQLITE_UTF16NATIVE macro. SQLITE_UTF16 is not used internally.
+ */
+ enc2 = enc & ~SQLITE_UTF16_ALIGNED;
+ if( enc2==SQLITE_UTF16 ){
+ enc2 = SQLITE_UTF16NATIVE;
+ }
+ if( (enc2&~3)!=0 ){
+ return SQLITE_MISUSE;
+ }
+
+ /* Check if this call is removing or replacing an existing collation
+ ** sequence. If so, and there are active VMs, return busy. If there
+ ** are no active VMs, invalidate any pre-compiled statements.
+ */
+ nName = sqlite3Strlen(db, zName);
+ pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, nName, 0);
+ if( pColl && pColl->xCmp ){
+ if( db->activeVdbeCnt ){
+ sqlite3Error(db, SQLITE_BUSY,
+ "Unable to delete/modify collation sequence due to active statements");
+ return SQLITE_BUSY;
+ }
+ sqlite3ExpirePreparedStatements(db);
+
+ /* If collation sequence pColl was created directly by a call to
+ ** sqlite3_create_collation, and not generated by synthCollSeq(),
+ ** then any copies made by synthCollSeq() need to be invalidated.
+ ** Also, collation destructor - CollSeq.xDel() - function may need
+ ** to be called.
+ */
+ if( (pColl->enc & ~SQLITE_UTF16_ALIGNED)==enc2 ){
+ CollSeq *aColl = sqlite3HashFind(&db->aCollSeq, zName, nName);
+ int j;
+ for(j=0; j<3; j++){
+ CollSeq *p = &aColl[j];
+ if( p->enc==pColl->enc ){
+ if( p->xDel ){
+ p->xDel(p->pUser);
+ }
+ p->xCmp = 0;
+ }
+ }
+ }
+ }
+
+ pColl = sqlite3FindCollSeq(db, (u8)enc2, zName, nName, 1);
+ if( pColl ){
+ pColl->xCmp = xCompare;
+ pColl->pUser = pCtx;
+ pColl->xDel = xDel;
+ pColl->enc = enc2 | (enc & SQLITE_UTF16_ALIGNED);
+ }
+ sqlite3Error(db, SQLITE_OK, 0);
+ return SQLITE_OK;
+}
+
+
+/*
+** This array defines hard upper bounds on limit values. The
+** initializer must be kept in sync with the SQLITE_LIMIT_*
+** #defines in sqlite3.h.
+*/
+static const int aHardLimit[] = {
+ SQLITE_MAX_LENGTH,
+ SQLITE_MAX_SQL_LENGTH,
+ SQLITE_MAX_COLUMN,
+ SQLITE_MAX_EXPR_DEPTH,
+ SQLITE_MAX_COMPOUND_SELECT,
+ SQLITE_MAX_VDBE_OP,
+ SQLITE_MAX_FUNCTION_ARG,
+ SQLITE_MAX_ATTACHED,
+ SQLITE_MAX_LIKE_PATTERN_LENGTH,
+ SQLITE_MAX_VARIABLE_NUMBER,
+};
+
+/*
+** Make sure the hard limits are set to reasonable values
+*/
+#if SQLITE_MAX_LENGTH<100
+# error SQLITE_MAX_LENGTH must be at least 100
+#endif
+#if SQLITE_MAX_SQL_LENGTH<100
+# error SQLITE_MAX_SQL_LENGTH must be at least 100
+#endif
+#if SQLITE_MAX_SQL_LENGTH>SQLITE_MAX_LENGTH
+# error SQLITE_MAX_SQL_LENGTH must not be greater than SQLITE_MAX_LENGTH
+#endif
+#if SQLITE_MAX_COMPOUND_SELECT<2
+# error SQLITE_MAX_COMPOUND_SELECT must be at least 2
+#endif
+#if SQLITE_MAX_VDBE_OP<40
+# error SQLITE_MAX_VDBE_OP must be at least 40
+#endif
+#if SQLITE_MAX_FUNCTION_ARG<0 || SQLITE_MAX_FUNCTION_ARG>127
+# error SQLITE_MAX_FUNCTION_ARG must be between 0 and 127
+#endif
+#if SQLITE_MAX_ATTACH<0 || SQLITE_MAX_ATTACH>30
+# error SQLITE_MAX_ATTACH must be between 0 and 30
+#endif
+#if SQLITE_MAX_LIKE_PATTERN_LENGTH<1
+# error SQLITE_MAX_LIKE_PATTERN_LENGTH must be at least 1
+#endif
+#if SQLITE_MAX_VARIABLE_NUMBER<1
+# error SQLITE_MAX_VARIABLE_NUMBER must be at least 1
+#endif
+
+
+/*
+** Change the value of a limit. Report the old value.
+** If an invalid limit index is supplied, report -1.
+** Make no changes but still report the old value if the
+** new limit is negative.
+**
+** A new lower limit does not shrink existing constructs.
+** It merely prevents new constructs that exceed the limit
+** from forming.
+*/
+int sqlite3_limit(sqlite3 *db, int limitId, int newLimit){
+ int oldLimit;
+ if( limitId<0 || limitId>=SQLITE_N_LIMIT ){
+ return -1;
+ }
+ oldLimit = db->aLimit[limitId];
+ if( newLimit>=0 ){
+ if( newLimit>aHardLimit[limitId] ){
+ newLimit = aHardLimit[limitId];
+ }
+ db->aLimit[limitId] = newLimit;
+ }
+ return oldLimit;
+}
+
+/*
+** This routine does the work of opening a database on behalf of
+** sqlite3_open() and sqlite3_open16(). The database filename "zFilename"
+** is UTF-8 encoded.
+*/
+static int openDatabase(
+ const char *zFilename, /* Database filename UTF-8 encoded */
+ sqlite3 **ppDb, /* OUT: Returned database handle */
+ unsigned flags, /* Operational flags */
+ const char *zVfs /* Name of the VFS to use */
+){
+ sqlite3 *db;
+ int rc;
+ CollSeq *pColl;
+ int isThreadsafe = 1;
+
+#ifndef SQLITE_OMIT_AUTOINIT
+ rc = sqlite3_initialize();
+ if( rc ) return rc;
+#endif
+
+ if( flags&SQLITE_OPEN_NOMUTEX ){
+ isThreadsafe = 0;
+ }
+
+ /* Remove harmful bits from the flags parameter */
+ flags &= ~( SQLITE_OPEN_DELETEONCLOSE |
+ SQLITE_OPEN_MAIN_DB |
+ SQLITE_OPEN_TEMP_DB |
+ SQLITE_OPEN_TRANSIENT_DB |
+ SQLITE_OPEN_MAIN_JOURNAL |
+ SQLITE_OPEN_TEMP_JOURNAL |
+ SQLITE_OPEN_SUBJOURNAL |
+ SQLITE_OPEN_MASTER_JOURNAL |
+ SQLITE_OPEN_NOMUTEX
+ );
+
+ /* Allocate the sqlite data structure */
+ db = sqlite3MallocZero( sizeof(sqlite3) );
+ if( db==0 ) goto opendb_out;
+ if( sqlite3Config.bFullMutex && isThreadsafe ){
+ db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE);
+ if( db->mutex==0 ){
+ sqlite3_free(db);
+ db = 0;
+ goto opendb_out;
+ }
+ }
+ sqlite3_mutex_enter(db->mutex);
+ db->errMask = 0xff;
+ db->priorNewRowid = 0;
+ db->nDb = 2;
+ db->magic = SQLITE_MAGIC_BUSY;
+ db->aDb = db->aDbStatic;
+
+ assert( sizeof(db->aLimit)==sizeof(aHardLimit) );
+ memcpy(db->aLimit, aHardLimit, sizeof(db->aLimit));
+ db->autoCommit = 1;
+ db->nextAutovac = -1;
+ db->nextPagesize = 0;
+ db->flags |= SQLITE_ShortColNames
+#if SQLITE_DEFAULT_FILE_FORMAT<4
+ | SQLITE_LegacyFileFmt
+#endif
+#ifdef SQLITE_ENABLE_LOAD_EXTENSION
+ | SQLITE_LoadExtension
+#endif
+ ;
+ sqlite3HashInit(&db->aFunc, SQLITE_HASH_STRING, 0);
+ sqlite3HashInit(&db->aCollSeq, SQLITE_HASH_STRING, 0);
+#ifndef SQLITE_OMIT_VIRTUALTABLE
+ sqlite3HashInit(&db->aModule, SQLITE_HASH_STRING, 0);
+#endif
+
+ db->pVfs = sqlite3_vfs_find(zVfs);
+ if( !db->pVfs ){
+ rc = SQLITE_ERROR;
+ db->magic = SQLITE_MAGIC_SICK;
+ sqlite3Error(db, rc, "no such vfs: %s", zVfs);
+ goto opendb_out;
+ }
+
+ /* Add the default collation sequence BINARY. BINARY works for both UTF-8
+ ** and UTF-16, so add a version for each to avoid any unnecessary
+ ** conversions. The only error that can occur here is a malloc() failure.
+ */
+ createCollation(db, "BINARY", SQLITE_UTF8, 0, binCollFunc, 0);
+ createCollation(db, "BINARY", SQLITE_UTF16BE, 0, binCollFunc, 0);
+ createCollation(db, "BINARY", SQLITE_UTF16LE, 0, binCollFunc, 0);
+ createCollation(db, "RTRIM", SQLITE_UTF8, (void*)1, binCollFunc, 0);
+ if( db->mallocFailed ){
+ db->magic = SQLITE_MAGIC_SICK;
+ goto opendb_out;
+ }
+ db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "BINARY", 6, 0);
+ assert( db->pDfltColl!=0 );
+
+ /* Also add a UTF-8 case-insensitive collation sequence. */
+ createCollation(db, "NOCASE", SQLITE_UTF8, 0, nocaseCollatingFunc, 0);
+
+ /* Set flags on the built-in collating sequences */
+ db->pDfltColl->type = SQLITE_COLL_BINARY;
+ pColl = sqlite3FindCollSeq(db, SQLITE_UTF8, "NOCASE", 6, 0);
+ if( pColl ){
+ pColl->type = SQLITE_COLL_NOCASE;
+ }
+
+ /* Open the backend database driver */
+ db->openFlags = flags;
+ rc = sqlite3BtreeFactory(db, zFilename, 0, SQLITE_DEFAULT_CACHE_SIZE,
+ flags | SQLITE_OPEN_MAIN_DB,
+ &db->aDb[0].pBt);
+ if( rc!=SQLITE_OK ){
+ sqlite3Error(db, rc, 0);
+ db->magic = SQLITE_MAGIC_SICK;
+ goto opendb_out;
+ }
+ db->aDb[0].pSchema = sqlite3SchemaGet(db, db->aDb[0].pBt);
+ db->aDb[1].pSchema = sqlite3SchemaGet(db, 0);
+
+
+ /* The default safety_level for the main database is 'full'; for the temp
+ ** database it is 'NONE'. This matches the pager layer defaults.
+ */
+ db->aDb[0].zName = "main";
+ db->aDb[0].safety_level = 3;
+#ifndef SQLITE_OMIT_TEMPDB
+ db->aDb[1].zName = "temp";
+ db->aDb[1].safety_level = 1;
+#endif
+
+ db->magic = SQLITE_MAGIC_OPEN;
+ if( db->mallocFailed ){
+ goto opendb_out;
+ }
+
+ /* Register all built-in functions, but do not attempt to read the
+ ** database schema yet. This is delayed until the first time the database
+ ** is accessed.
+ */
+ sqlite3Error(db, SQLITE_OK, 0);
+ sqlite3RegisterBuiltinFunctions(db);
+
+ /* Load automatic extensions - extensions that have been registered
+ ** using the sqlite3_automatic_extension() API.
+ */
+ (void)sqlite3AutoLoadExtensions(db);
+ if( sqlite3_errcode(db)!=SQLITE_OK ){
+ goto opendb_out;
+ }
+
+#ifdef SQLITE_ENABLE_FTS1
+ if( !db->mallocFailed ){
+ extern int sqlite3Fts1Init(sqlite3*);
+ rc = sqlite3Fts1Init(db);
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_FTS2
+ if( !db->mallocFailed && rc==SQLITE_OK ){
+ extern int sqlite3Fts2Init(sqlite3*);
+ rc = sqlite3Fts2Init(db);
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_FTS3
+ if( !db->mallocFailed && rc==SQLITE_OK ){
+ rc = sqlite3Fts3Init(db);
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_ICU
+ if( !db->mallocFailed && rc==SQLITE_OK ){
+ extern int sqlite3IcuInit(sqlite3*);
+ rc = sqlite3IcuInit(db);
+ }
+#endif
+
+#ifdef SQLITE_ENABLE_RTREE
+ if( !db->mallocFailed && rc==SQLITE_OK){
+ rc = sqlite3RtreeInit(db);
+ }
+#endif
+
+ sqlite3Error(db, rc, 0);
+
+ /* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking
+ ** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking
+ ** mode. Doing nothing at all also makes NORMAL the default.
+ */
+#ifdef SQLITE_DEFAULT_LOCKING_MODE
+ db->dfltLockMode = SQLITE_DEFAULT_LOCKING_MODE;
+ sqlite3PagerLockingMode(sqlite3BtreePager(db->aDb[0].pBt),
+ SQLITE_DEFAULT_LOCKING_MODE);
+#endif
+
+ /* Enable the lookaside-malloc subsystem */
+ setupLookaside(db, 0, sqlite3Config.szLookaside, sqlite3Config.nLookaside);
+
+opendb_out:
+ if( db ){
+ assert( db->mutex!=0 || isThreadsafe==0 || sqlite3Config.bFullMutex==0 );
+ sqlite3_mutex_leave(db->mutex);
+ }
+ if( SQLITE_NOMEM==(rc = sqlite3_errcode(db)) ){
+ sqlite3_close(db);
+ db = 0;
+ }
+ *ppDb = db;
+ return sqlite3ApiExit(0, rc);
+}
+
+/*
+** Open a new database handle.
+*/
+int sqlite3_open(
+ const char *zFilename,
+ sqlite3 **ppDb
+){
+ return openDatabase(zFilename, ppDb,
+ SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0);
+}
+int sqlite3_open_v2(
+ const char *filename, /* Database filename (UTF-8) */
+ sqlite3 **ppDb, /* OUT: SQLite db handle */
+ int flags, /* Flags */
+ const char *zVfs /* Name of VFS module to use */
+){
+ return openDatabase(filename, ppDb, flags, zVfs);
+}
+
+#ifndef SQLITE_OMIT_UTF16
+/*
+** Open a new database handle.
+*/
+int sqlite3_open16(
+ const void *zFilename,
+ sqlite3 **ppDb
+){
+ char const *zFilename8; /* zFilename encoded in UTF-8 instead of UTF-16 */
+ sqlite3_value *pVal;
+ int rc;
+
+ assert( zFilename );
+ assert( ppDb );
+ *ppDb = 0;
+#ifndef SQLITE_OMIT_AUTOINIT
+ rc = sqlite3_initialize();
+ if( rc ) return rc;
+#endif
+ pVal = sqlite3ValueNew(0);
+ sqlite3ValueSetStr(pVal, -1, zFilename, SQLITE_UTF16NATIVE, SQLITE_STATIC);
+ zFilename8 = sqlite3ValueText(pVal, SQLITE_UTF8);
+ if( zFilename8 ){
+ rc = openDatabase(zFilename8, ppDb,
+ SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, 0);
+ assert( *ppDb || rc==SQLITE_NOMEM );
+ if( rc==SQLITE_OK && !DbHasProperty(*ppDb, 0, DB_SchemaLoaded) ){
+ ENC(*ppDb) = SQLITE_UTF16NATIVE;
+ }
+ }else{
+ rc = SQLITE_NOMEM;
+ }
+ sqlite3ValueFree(pVal);
+
+ return sqlite3ApiExit(0, rc);
+}
+#endif /* SQLITE_OMIT_UTF16 */
+
+/*
+** Register a new collation sequence with the database handle db.
+*/
+int sqlite3_create_collation(
+ sqlite3* db,
+ const char *zName,
+ int enc,
+ void* pCtx,
+ int(*xCompare)(void*,int,const void*,int,const void*)
+){
+ int rc;
+ sqlite3_mutex_enter(db->mutex);
+ assert( !db->mallocFailed );
+ rc = createCollation(db, zName, enc, pCtx, xCompare, 0);
+ rc = sqlite3ApiExit(db, rc);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+
+/*
+** Register a new collation sequence with the database handle db.
+*/
+int sqlite3_create_collation_v2(
+ sqlite3* db,
+ const char *zName,
+ int enc,
+ void* pCtx,
+ int(*xCompare)(void*,int,const void*,int,const void*),
+ void(*xDel)(void*)
+){
+ int rc;
+ sqlite3_mutex_enter(db->mutex);
+ assert( !db->mallocFailed );
+ rc = createCollation(db, zName, enc, pCtx, xCompare, xDel);
+ rc = sqlite3ApiExit(db, rc);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+
+#ifndef SQLITE_OMIT_UTF16
+/*
+** Register a new collation sequence with the database handle db.
+*/
+int sqlite3_create_collation16(
+ sqlite3* db,
+ const void *zName,
+ int enc,
+ void* pCtx,
+ int(*xCompare)(void*,int,const void*,int,const void*)
+){
+ int rc = SQLITE_OK;
+ char *zName8;
+ sqlite3_mutex_enter(db->mutex);
+ assert( !db->mallocFailed );
+ zName8 = sqlite3Utf16to8(db, zName, -1);
+ if( zName8 ){
+ rc = createCollation(db, zName8, enc, pCtx, xCompare, 0);
+ sqlite3DbFree(db, zName8);
+ }
+ rc = sqlite3ApiExit(db, rc);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+#endif /* SQLITE_OMIT_UTF16 */
+
+/*
+** Register a collation sequence factory callback with the database handle
+** db. Replace any previously installed collation sequence factory.
+*/
+int sqlite3_collation_needed(
+ sqlite3 *db,
+ void *pCollNeededArg,
+ void(*xCollNeeded)(void*,sqlite3*,int eTextRep,const char*)
+){
+ sqlite3_mutex_enter(db->mutex);
+ db->xCollNeeded = xCollNeeded;
+ db->xCollNeeded16 = 0;
+ db->pCollNeededArg = pCollNeededArg;
+ sqlite3_mutex_leave(db->mutex);
+ return SQLITE_OK;
+}
+
+#ifndef SQLITE_OMIT_UTF16
+/*
+** Register a collation sequence factory callback with the database handle
+** db. Replace any previously installed collation sequence factory.
+*/
+int sqlite3_collation_needed16(
+ sqlite3 *db,
+ void *pCollNeededArg,
+ void(*xCollNeeded16)(void*,sqlite3*,int eTextRep,const void*)
+){
+ sqlite3_mutex_enter(db->mutex);
+ db->xCollNeeded = 0;
+ db->xCollNeeded16 = xCollNeeded16;
+ db->pCollNeededArg = pCollNeededArg;
+ sqlite3_mutex_leave(db->mutex);
+ return SQLITE_OK;
+}
+#endif /* SQLITE_OMIT_UTF16 */
+
+#ifndef SQLITE_OMIT_GLOBALRECOVER
+/*
+** This function is now an anachronism. It used to be used to recover from a
+** malloc() failure, but SQLite now does this automatically.
+*/
+int sqlite3_global_recover(void){
+ return SQLITE_OK;
+}
+#endif
+
+/*
+** Test to see whether or not the database connection is in autocommit
+** mode. Return TRUE if it is and FALSE if not. Autocommit mode is on
+** by default. Autocommit is disabled by a BEGIN statement and reenabled
+** by the next COMMIT or ROLLBACK.
+**
+******* THIS IS AN EXPERIMENTAL API AND IS SUBJECT TO CHANGE ******
+*/
+int sqlite3_get_autocommit(sqlite3 *db){
+ return db->autoCommit;
+}
+
+#ifdef SQLITE_DEBUG
+/*
+** The following routine is subtituted for constant SQLITE_CORRUPT in
+** debugging builds. This provides a way to set a breakpoint for when
+** corruption is first detected.
+*/
+int sqlite3Corrupt(void){
+ return SQLITE_CORRUPT;
+}
+#endif
+
+/*
+** This is a convenience routine that makes sure that all thread-specific
+** data for this thread has been deallocated.
+**
+** SQLite no longer uses thread-specific data so this routine is now a
+** no-op. It is retained for historical compatibility.
+*/
+void sqlite3_thread_cleanup(void){
+}
+
+/*
+** Return meta information about a specific column of a database table.
+** See comment in sqlite3.h (sqlite.h.in) for details.
+*/
+#ifdef SQLITE_ENABLE_COLUMN_METADATA
+int sqlite3_table_column_metadata(
+ sqlite3 *db, /* Connection handle */
+ const char *zDbName, /* Database name or NULL */
+ const char *zTableName, /* Table name */
+ const char *zColumnName, /* Column name */
+ char const **pzDataType, /* OUTPUT: Declared data type */
+ char const **pzCollSeq, /* OUTPUT: Collation sequence name */
+ int *pNotNull, /* OUTPUT: True if NOT NULL constraint exists */
+ int *pPrimaryKey, /* OUTPUT: True if column part of PK */
+ int *pAutoinc /* OUTPUT: True if column is auto-increment */
+){
+ int rc;
+ char *zErrMsg = 0;
+ Table *pTab = 0;
+ Column *pCol = 0;
+ int iCol;
+
+ char const *zDataType = 0;
+ char const *zCollSeq = 0;
+ int notnull = 0;
+ int primarykey = 0;
+ int autoinc = 0;
+
+ /* Ensure the database schema has been loaded */
+ sqlite3_mutex_enter(db->mutex);
+ (void)sqlite3SafetyOn(db);
+ sqlite3BtreeEnterAll(db);
+ rc = sqlite3Init(db, &zErrMsg);
+ sqlite3BtreeLeaveAll(db);
+ if( SQLITE_OK!=rc ){
+ goto error_out;
+ }
+
+ /* Locate the table in question */
+ pTab = sqlite3FindTable(db, zTableName, zDbName);
+ if( !pTab || pTab->pSelect ){
+ pTab = 0;
+ goto error_out;
+ }
+
+ /* Find the column for which info is requested */
+ if( sqlite3IsRowid(zColumnName) ){
+ iCol = pTab->iPKey;
+ if( iCol>=0 ){
+ pCol = &pTab->aCol[iCol];
+ }
+ }else{
+ for(iCol=0; iCol<pTab->nCol; iCol++){
+ pCol = &pTab->aCol[iCol];
+ if( 0==sqlite3StrICmp(pCol->zName, zColumnName) ){
+ break;
+ }
+ }
+ if( iCol==pTab->nCol ){
+ pTab = 0;
+ goto error_out;
+ }
+ }
+
+ /* The following block stores the meta information that will be returned
+ ** to the caller in local variables zDataType, zCollSeq, notnull, primarykey
+ ** and autoinc. At this point there are two possibilities:
+ **
+ ** 1. The specified column name was rowid", "oid" or "_rowid_"
+ ** and there is no explicitly declared IPK column.
+ **
+ ** 2. The table is not a view and the column name identified an
+ ** explicitly declared column. Copy meta information from *pCol.
+ */
+ if( pCol ){
+ zDataType = pCol->zType;
+ zCollSeq = pCol->zColl;
+ notnull = pCol->notNull!=0;
+ primarykey = pCol->isPrimKey!=0;
+ autoinc = pTab->iPKey==iCol && pTab->autoInc;
+ }else{
+ zDataType = "INTEGER";
+ primarykey = 1;
+ }
+ if( !zCollSeq ){
+ zCollSeq = "BINARY";
+ }
+
+error_out:
+ (void)sqlite3SafetyOff(db);
+
+ /* Whether the function call succeeded or failed, set the output parameters
+ ** to whatever their local counterparts contain. If an error did occur,
+ ** this has the effect of zeroing all output parameters.
+ */
+ if( pzDataType ) *pzDataType = zDataType;
+ if( pzCollSeq ) *pzCollSeq = zCollSeq;
+ if( pNotNull ) *pNotNull = notnull;
+ if( pPrimaryKey ) *pPrimaryKey = primarykey;
+ if( pAutoinc ) *pAutoinc = autoinc;
+
+ if( SQLITE_OK==rc && !pTab ){
+ sqlite3DbFree(db, zErrMsg);
+ zErrMsg = sqlite3MPrintf(db, "no such table column: %s.%s", zTableName,
+ zColumnName);
+ rc = SQLITE_ERROR;
+ }
+ sqlite3Error(db, rc, (zErrMsg?"%s":0), zErrMsg);
+ sqlite3DbFree(db, zErrMsg);
+ rc = sqlite3ApiExit(db, rc);
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+#endif
+
+/*
+** Sleep for a little while. Return the amount of time slept.
+*/
+int sqlite3_sleep(int ms){
+ sqlite3_vfs *pVfs;
+ int rc;
+ pVfs = sqlite3_vfs_find(0);
+ if( pVfs==0 ) return 0;
+
+ /* This function works in milliseconds, but the underlying OsSleep()
+ ** API uses microseconds. Hence the 1000's.
+ */
+ rc = (sqlite3OsSleep(pVfs, 1000*ms)/1000);
+ return rc;
+}
+
+/*
+** Enable or disable the extended result codes.
+*/
+int sqlite3_extended_result_codes(sqlite3 *db, int onoff){
+ sqlite3_mutex_enter(db->mutex);
+ db->errMask = onoff ? 0xffffffff : 0xff;
+ sqlite3_mutex_leave(db->mutex);
+ return SQLITE_OK;
+}
+
+/*
+** Invoke the xFileControl method on a particular database.
+*/
+int sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, void *pArg){
+ int rc = SQLITE_ERROR;
+ int iDb;
+ sqlite3_mutex_enter(db->mutex);
+ if( zDbName==0 ){
+ iDb = 0;
+ }else{
+ for(iDb=0; iDb<db->nDb; iDb++){
+ if( strcmp(db->aDb[iDb].zName, zDbName)==0 ) break;
+ }
+ }
+ if( iDb<db->nDb ){
+ Btree *pBtree = db->aDb[iDb].pBt;
+ if( pBtree ){
+ Pager *pPager;
+ sqlite3_file *fd;
+ sqlite3BtreeEnter(pBtree);
+ pPager = sqlite3BtreePager(pBtree);
+ assert( pPager!=0 );
+ fd = sqlite3PagerFile(pPager);
+ assert( fd!=0 );
+ if( fd->pMethods ){
+ rc = sqlite3OsFileControl(fd, op, pArg);
+ }
+ sqlite3BtreeLeave(pBtree);
+ }
+ }
+ sqlite3_mutex_leave(db->mutex);
+ return rc;
+}
+
+/*
+** Interface to the testing logic.
+*/
+int sqlite3_test_control(int op, ...){
+ int rc = 0;
+#ifndef SQLITE_OMIT_BUILTIN_TEST
+ va_list ap;
+ va_start(ap, op);
+ switch( op ){
+
+ /*
+ ** Save the current state of the PRNG.
+ */
+ case SQLITE_TESTCTRL_PRNG_SAVE: {
+ sqlite3PrngSaveState();
+ break;
+ }
+
+ /*
+ ** Restore the state of the PRNG to the last state saved using
+ ** PRNG_SAVE. If PRNG_SAVE has never before been called, then
+ ** this verb acts like PRNG_RESET.
+ */
+ case SQLITE_TESTCTRL_PRNG_RESTORE: {
+ sqlite3PrngRestoreState();
+ break;
+ }
+
+ /*
+ ** Reset the PRNG back to its uninitialized state. The next call
+ ** to sqlite3_randomness() will reseed the PRNG using a single call
+ ** to the xRandomness method of the default VFS.
+ */
+ case SQLITE_TESTCTRL_PRNG_RESET: {
+ sqlite3PrngResetState();
+ break;
+ }
+
+ /*
+ ** sqlite3_test_control(BITVEC_TEST, size, program)
+ **
+ ** Run a test against a Bitvec object of size. The program argument
+ ** is an array of integers that defines the test. Return -1 on a
+ ** memory allocation error, 0 on success, or non-zero for an error.
+ ** See the sqlite3BitvecBuiltinTest() for additional information.
+ */
+ case SQLITE_TESTCTRL_BITVEC_TEST: {
+ int sz = va_arg(ap, int);
+ int *aProg = va_arg(ap, int*);
+ rc = sqlite3BitvecBuiltinTest(sz, aProg);
+ break;
+ }
+
+ /*
+ ** sqlite3_test_control(BENIGN_MALLOC_HOOKS, xBegin, xEnd)
+ **
+ ** Register hooks to call to indicate which malloc() failures
+ ** are benign.
+ */
+ case SQLITE_TESTCTRL_BENIGN_MALLOC_HOOKS: {
+ typedef void (*void_function)(void);
+ void_function xBenignBegin;
+ void_function xBenignEnd;
+ xBenignBegin = va_arg(ap, void_function);
+ xBenignEnd = va_arg(ap, void_function);
+ sqlite3BenignMallocHooks(xBenignBegin, xBenignEnd);
+ break;
+ }
+ }
+ va_end(ap);
+#endif /* SQLITE_OMIT_BUILTIN_TEST */
+ return rc;
+}