/*
* tclMain.c --
*
* Main program for Tcl shells and other Tcl-based applications.
*
* Copyright (c) 1988-1994 The Regents of the University of California.
* Copyright (c) 1994-1997 Sun Microsystems, Inc.
* Copyright (c) 2000 Ajuba Solutions.
* Portions Copyright (c) 2007-2008 Nokia Corporation and/or its subsidiaries. All rights reserved.
*
* See the file "license.terms" for information on usage and redistribution
* of this file, and for a DISCLAIMER OF ALL WARRANTIES.
*
* RCS: @(#) $Id: tclMain.c,v 1.20.2.3 2006/05/05 18:08:58 dgp Exp $
*/
#include "tcl.h"
#include "tclInt.h"
#if defined(__SYMBIAN32__)
#include "tclPort.h"
#include "tclSymbianGlobals.h"
#include "tclIntPlatDecls.h"
#endif
# undef TCL_STORAGE_CLASS
# define TCL_STORAGE_CLASS DLLEXPORT
/*
* Declarations for various library procedures and variables (don't want
* to include tclPort.h here, because people might copy this file out of
* the Tcl source directory to make their own modified versions).
*/
#if !defined(MAC_TCL)
extern int isatty _ANSI_ARGS_((int fd));
#else
#include <unistd.h>
#endif
static Tcl_Obj *tclStartupScriptPath = NULL;
static Tcl_MainLoopProc *mainLoopProc = NULL;
/*
* Structure definition for information used to keep the state of
* an interactive command processor that reads lines from standard
* input and writes prompts and results to standard output.
*/
typedef enum {
PROMPT_NONE, /* Print no prompt */
PROMPT_START, /* Print prompt for command start */
PROMPT_CONTINUE /* Print prompt for command continuation */
} PromptType;
typedef struct InteractiveState {
Tcl_Channel input; /* The standard input channel from which
* lines are read. */
int tty; /* Non-zero means standard input is a
* terminal-like device. Zero means it's
* a file. */
Tcl_Obj *commandPtr; /* Used to assemble lines of input into
* Tcl commands. */
PromptType prompt; /* Next prompt to print */
Tcl_Interp *interp; /* Interpreter that evaluates interactive
* commands. */
} InteractiveState;
/*
* Forward declarations for procedures defined later in this file.
*/
static void Prompt _ANSI_ARGS_((Tcl_Interp *interp,
PromptType *promptPtr));
static void StdinProc _ANSI_ARGS_((ClientData clientData,
int mask));
/*
*----------------------------------------------------------------------
*
* TclSetStartupScriptPath --
*
* Primes the startup script VFS path, used to override the
* command line processing.
*
* Results:
* None.
*
* Side effects:
* This procedure initializes the VFS path of the Tcl script to
* run at startup.
*
*----------------------------------------------------------------------
*/
void TclSetStartupScriptPath(pathPtr)
Tcl_Obj *pathPtr;
{
if (tclStartupScriptPath != NULL) {
Tcl_DecrRefCount(tclStartupScriptPath);
}
tclStartupScriptPath = pathPtr;
if (tclStartupScriptPath != NULL) {
Tcl_IncrRefCount(tclStartupScriptPath);
}
}
/*
*----------------------------------------------------------------------
*
* TclGetStartupScriptPath --
*
* Gets the startup script VFS path, used to override the
* command line processing.
*
* Results:
* The startup script VFS path, NULL if none has been set.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
Tcl_Obj *TclGetStartupScriptPath()
{
return tclStartupScriptPath;
}
/*
*----------------------------------------------------------------------
*
* TclSetStartupScriptFileName --
*
* Primes the startup script file name, used to override the
* command line processing.
*
* Results:
* None.
*
* Side effects:
* This procedure initializes the file name of the Tcl script to
* run at startup.
*
*----------------------------------------------------------------------
*/
void TclSetStartupScriptFileName(fileName)
CONST char *fileName;
{
Tcl_Obj *pathPtr = Tcl_NewStringObj(fileName,-1);
TclSetStartupScriptPath(pathPtr);
}
/*
*----------------------------------------------------------------------
*
* TclGetStartupScriptFileName --
*
* Gets the startup script file name, used to override the
* command line processing.
*
* Results:
* The startup script file name, NULL if none has been set.
*
* Side effects:
* None.
*
*----------------------------------------------------------------------
*/
CONST char *TclGetStartupScriptFileName()
{
Tcl_Obj *pathPtr = TclGetStartupScriptPath();
if (pathPtr == NULL) {
return NULL;
}
return Tcl_GetString(pathPtr);
}
/*
*----------------------------------------------------------------------
*
* Tcl_Main --
*
* Main program for tclsh and most other Tcl-based applications.
*
* Results:
* None. This procedure never returns (it exits the process when
* it's done).
*
* Side effects:
* This procedure initializes the Tcl world and then starts
* interpreting commands; almost anything could happen, depending
* on the script being interpreted.
*
*----------------------------------------------------------------------
*/
void
Tcl_Main(argc, argv, appInitProc)
int argc; /* Number of arguments. */
char **argv; /* Array of argument strings. */
Tcl_AppInitProc *appInitProc;
/* Application-specific initialization
* procedure to call after most
* initialization but before starting to
* execute commands. */
{
Tcl_Obj *resultPtr, *argvPtr, *commandPtr = NULL;
PromptType prompt = PROMPT_START;
int code, length, tty, exitCode = 0;
Tcl_Channel inChannel, outChannel, errChannel;
Tcl_Interp *interp;
Tcl_DString appName;
Tcl_Obj *objPtr;
#if defined(__SYMBIAN32__)
int isChildProcess = 0;
int oldArgc = 0;
#endif
Tcl_FindExecutable(argv[0]);
interp = Tcl_CreateInterp();
#if defined(__SYMBIAN32__)
if (ChildProcessInit(&argc, &argv))
{
oldArgc = argc;
argc = argc-4;
isChildProcess = 1;
}
#endif
Tcl_InitMemory(interp);
/*
* Make command-line arguments available in the Tcl variables "argc"
* and "argv". If the first argument doesn't start with a "-" then
* strip it off and use it as the name of a script file to process.
*/
if (TclGetStartupScriptPath() == NULL) {
if ((argc > 1) && (argv[1][0] != '-')) {
TclSetStartupScriptFileName(argv[1]);
argc--;
argv++;
}
}
if (TclGetStartupScriptPath() == NULL) {
Tcl_ExternalToUtfDString(NULL, argv[0], -1, &appName);
} else {
TclSetStartupScriptFileName(Tcl_ExternalToUtfDString(NULL,
TclGetStartupScriptFileName(), -1, &appName));
}
Tcl_SetVar(interp, "argv0", Tcl_DStringValue(&appName), TCL_GLOBAL_ONLY);
Tcl_DStringFree(&appName);
argc--;
argv++;
objPtr = Tcl_NewIntObj(argc);
Tcl_IncrRefCount(objPtr);
Tcl_SetVar2Ex(interp, "argc", NULL, objPtr, TCL_GLOBAL_ONLY);
Tcl_DecrRefCount(objPtr);
argvPtr = Tcl_NewListObj(0, NULL);
while (argc--) {
Tcl_DString ds;
Tcl_ExternalToUtfDString(NULL, *argv++, -1, &ds);
Tcl_ListObjAppendElement(NULL, argvPtr, Tcl_NewStringObj(
Tcl_DStringValue(&ds), Tcl_DStringLength(&ds)));
Tcl_DStringFree(&ds);
}
Tcl_IncrRefCount(argvPtr);
Tcl_SetVar2Ex(interp, "argv", NULL, argvPtr, TCL_GLOBAL_ONLY);
Tcl_DecrRefCount(argvPtr);
/*
* Set the "tcl_interactive" variable.
*/
tty = isatty(0);
Tcl_SetVar(interp, "tcl_interactive",
((TclGetStartupScriptPath() == NULL) && tty) ? "1" : "0",
TCL_GLOBAL_ONLY);
/*
* Invoke application-specific initialization.
*/
Tcl_Preserve((ClientData) interp);
if ((*appInitProc)(interp) != TCL_OK) {
errChannel = Tcl_GetStdChannel(TCL_STDERR);
if (errChannel) {
Tcl_WriteChars(errChannel,
"application-specific initialization failed: ", -1);
Tcl_WriteObj(errChannel, Tcl_GetObjResult(interp));
Tcl_WriteChars(errChannel, "\n", 1);
}
}
if (Tcl_InterpDeleted(interp)) {
goto done;
}
/*
* If a script file was specified then just source that file
* and quit.
*/
if (TclGetStartupScriptPath() != NULL) {
code = Tcl_FSEvalFile(interp, TclGetStartupScriptPath());
if (code != TCL_OK) {
errChannel = Tcl_GetStdChannel(TCL_STDERR);
if (errChannel) {
/*
* The following statement guarantees that the errorInfo
* variable is set properly.
*/
Tcl_AddErrorInfo(interp, "");
Tcl_WriteObj(errChannel, Tcl_GetVar2Ex(interp, "errorInfo",
NULL, TCL_GLOBAL_ONLY));
Tcl_WriteChars(errChannel, "\n", 1);
}
exitCode = 1;
}
goto done;
}
/*
* We're running interactively. Source a user-specific startup
* file if the application specified one and if the file exists.
*/
Tcl_SourceRCFile(interp);
/*
* Process commands from stdin until there's an end-of-file. Note
* that we need to fetch the standard channels again after every
* eval, since they may have been changed.
*/
commandPtr = Tcl_NewObj();
Tcl_IncrRefCount(commandPtr);
/*
* Get a new value for tty if anyone writes to ::tcl_interactive
*/
Tcl_LinkVar(interp, "tcl_interactive", (char *) &tty, TCL_LINK_BOOLEAN);
inChannel = Tcl_GetStdChannel(TCL_STDIN);
outChannel = Tcl_GetStdChannel(TCL_STDOUT);
while ((inChannel != (Tcl_Channel) NULL) && !Tcl_InterpDeleted(interp)) {
if (mainLoopProc == NULL) {
if (tty) {
Prompt(interp, &prompt);
if (Tcl_InterpDeleted(interp)) {
break;
}
inChannel = Tcl_GetStdChannel(TCL_STDIN);
if (inChannel == (Tcl_Channel) NULL) {
break;
}
}
if (Tcl_IsShared(commandPtr)) {
Tcl_DecrRefCount(commandPtr);
commandPtr = Tcl_DuplicateObj(commandPtr);
Tcl_IncrRefCount(commandPtr);
}
length = Tcl_GetsObj(inChannel, commandPtr);
if (length < 0) {
if (Tcl_InputBlocked(inChannel)) {
/*
* This can only happen if stdin has been set to
* non-blocking. In that case cycle back and try
* again. This sets up a tight polling loop (since
* we have no event loop running). If this causes
* bad CPU hogging, we might try toggling the blocking
* on stdin instead.
*/
continue;
}
/*
* Either EOF, or an error on stdin; we're done
*/
break;
}
/*
* Add the newline removed by Tcl_GetsObj back to the string.
*/
if (Tcl_IsShared(commandPtr)) {
Tcl_DecrRefCount(commandPtr);
commandPtr = Tcl_DuplicateObj(commandPtr);
Tcl_IncrRefCount(commandPtr);
}
Tcl_AppendToObj(commandPtr, "\n", 1);
if (!TclObjCommandComplete(commandPtr)) {
prompt = PROMPT_CONTINUE;
continue;
}
prompt = PROMPT_START;
code = Tcl_RecordAndEvalObj(interp, commandPtr, TCL_EVAL_GLOBAL);
inChannel = Tcl_GetStdChannel(TCL_STDIN);
outChannel = Tcl_GetStdChannel(TCL_STDOUT);
errChannel = Tcl_GetStdChannel(TCL_STDERR);
Tcl_DecrRefCount(commandPtr);
commandPtr = Tcl_NewObj();
Tcl_IncrRefCount(commandPtr);
if (code != TCL_OK) {
if (errChannel) {
Tcl_WriteObj(errChannel, Tcl_GetObjResult(interp));
Tcl_WriteChars(errChannel, "\n", 1);
}
} else if (tty) {
resultPtr = Tcl_GetObjResult(interp);
Tcl_IncrRefCount(resultPtr);
Tcl_GetStringFromObj(resultPtr, &length);
if ((length > 0) && outChannel) {
Tcl_WriteObj(outChannel, resultPtr);
Tcl_WriteChars(outChannel, "\n", 1);
}
Tcl_DecrRefCount(resultPtr);
}
} else { /* (mainLoopProc != NULL) */
/*
* If a main loop has been defined while running interactively,
* we want to start a fileevent based prompt by establishing a
* channel handler for stdin.
*/
InteractiveState *isPtr = NULL;
if (inChannel) {
if (tty) {
Prompt(interp, &prompt);
}
isPtr = (InteractiveState *)
ckalloc((int) sizeof(InteractiveState));
isPtr->input = inChannel;
isPtr->tty = tty;
isPtr->commandPtr = commandPtr;
isPtr->prompt = prompt;
isPtr->interp = interp;
Tcl_UnlinkVar(interp, "tcl_interactive");
Tcl_LinkVar(interp, "tcl_interactive", (char *) &(isPtr->tty),
TCL_LINK_BOOLEAN);
Tcl_CreateChannelHandler(inChannel, TCL_READABLE, StdinProc,
(ClientData) isPtr);
}
(*mainLoopProc)();
mainLoopProc = NULL;
if (inChannel) {
tty = isPtr->tty;
Tcl_UnlinkVar(interp, "tcl_interactive");
Tcl_LinkVar(interp, "tcl_interactive", (char *) &tty,
TCL_LINK_BOOLEAN);
prompt = isPtr->prompt;
commandPtr = isPtr->commandPtr;
if (isPtr->input != (Tcl_Channel) NULL) {
Tcl_DeleteChannelHandler(isPtr->input, StdinProc,
(ClientData) isPtr);
}
ckfree((char *)isPtr);
}
inChannel = Tcl_GetStdChannel(TCL_STDIN);
outChannel = Tcl_GetStdChannel(TCL_STDOUT);
errChannel = Tcl_GetStdChannel(TCL_STDERR);
}
#ifdef TCL_MEM_DEBUG
/*
* This code here only for the (unsupported and deprecated)
* [checkmem] command.
*/
if (tclMemDumpFileName != NULL) {
mainLoopProc = NULL;
Tcl_DeleteInterp(interp);
}
#endif
}
done:
if ((exitCode == 0) && (mainLoopProc != NULL)) {
/*
* If everything has gone OK so far, call the main loop proc,
* if it exists. Packages (like Tk) can set it to start processing
* events at this point.
*/
(*mainLoopProc)();
mainLoopProc = NULL;
}
if (commandPtr != NULL) {
Tcl_DecrRefCount(commandPtr);
}
#if defined(__SYMBIAN32__)
ChildProcessCleanup(isChildProcess, oldArgc, argv);
#else
close (TCL_STDIN);
close (TCL_STDOUT);
close (TCL_STDERR); //every process has a error file
#endif
/*
* Rather than calling exit, invoke the "exit" command so that
* users can replace "exit" with some other command to do additional
* cleanup on exit. The Tcl_Eval call should never return.
*/
if (!Tcl_InterpDeleted(interp)) {
char buffer[TCL_INTEGER_SPACE + 5];
sprintf(buffer, "exit %d", exitCode);
Tcl_Eval(interp, buffer);
/*
* If Tcl_Eval returns, trying to eval [exit], something
* unusual is happening. Maybe interp has been deleted;
* maybe [exit] was redefined. We still want to cleanup
* and exit.
*/
if (!Tcl_InterpDeleted(interp)) {
Tcl_DeleteInterp(interp);
}
}
TclSetStartupScriptPath(NULL);
/*
* If we get here, the master interp has been deleted. Allow
* its destruction with the last matching Tcl_Release.
*/
Tcl_Release((ClientData) interp);
Tcl_Exit(exitCode);
}
/*
*---------------------------------------------------------------
*
* Tcl_SetMainLoop --
*
* Sets an alternative main loop procedure.
*
* Results:
* Returns the previously defined main loop procedure.
*
* Side effects:
* This procedure will be called before Tcl exits, allowing for
* the creation of an event loop.
*
*---------------------------------------------------------------
*/
EXPORT_C void
Tcl_SetMainLoop(proc)
Tcl_MainLoopProc *proc;
{
mainLoopProc = proc;
}
/*
*----------------------------------------------------------------------
*
* StdinProc --
*
* This procedure is invoked by the event dispatcher whenever
* standard input becomes readable. It grabs the next line of
* input characters, adds them to a command being assembled, and
* executes the command if it's complete.
*
* Results:
* None.
*
* Side effects:
* Could be almost arbitrary, depending on the command that's
* typed.
*
*----------------------------------------------------------------------
*/
/* ARGSUSED */
static void
StdinProc(clientData, mask)
ClientData clientData; /* The state of interactive cmd line */
int mask; /* Not used. */
{
InteractiveState *isPtr = (InteractiveState *) clientData;
Tcl_Channel chan = isPtr->input;
Tcl_Obj *commandPtr = isPtr->commandPtr;
Tcl_Interp *interp = isPtr->interp;
int code, length;
if (Tcl_IsShared(commandPtr)) {
Tcl_DecrRefCount(commandPtr);
commandPtr = Tcl_DuplicateObj(commandPtr);
Tcl_IncrRefCount(commandPtr);
}
length = Tcl_GetsObj(chan, commandPtr);
if (length < 0) {
if (Tcl_InputBlocked(chan)) {
return;
}
if (isPtr->tty) {
/*
* Would be better to find a way to exit the mainLoop?
* Or perhaps evaluate [exit]? Leaving as is for now due
* to compatibility concerns.
*/
Tcl_Exit(0);
}
Tcl_DeleteChannelHandler(chan, StdinProc, (ClientData) isPtr);
return;
}
if (Tcl_IsShared(commandPtr)) {
Tcl_DecrRefCount(commandPtr);
commandPtr = Tcl_DuplicateObj(commandPtr);
Tcl_IncrRefCount(commandPtr);
}
Tcl_AppendToObj(commandPtr, "\n", 1);
if (!TclObjCommandComplete(commandPtr)) {
isPtr->prompt = PROMPT_CONTINUE;
goto prompt;
}
isPtr->prompt = PROMPT_START;
/*
* Disable the stdin channel handler while evaluating the command;
* otherwise if the command re-enters the event loop we might
* process commands from stdin before the current command is
* finished. Among other things, this will trash the text of the
* command being evaluated.
*/
Tcl_CreateChannelHandler(chan, 0, StdinProc, (ClientData) isPtr);
code = Tcl_RecordAndEvalObj(interp, commandPtr, TCL_EVAL_GLOBAL);
isPtr->input = chan = Tcl_GetStdChannel(TCL_STDIN);
Tcl_DecrRefCount(commandPtr);
isPtr->commandPtr = commandPtr = Tcl_NewObj();
Tcl_IncrRefCount(commandPtr);
if (chan != (Tcl_Channel) NULL) {
Tcl_CreateChannelHandler(chan, TCL_READABLE, StdinProc,
(ClientData) isPtr);
}
if (code != TCL_OK) {
Tcl_Channel errChannel = Tcl_GetStdChannel(TCL_STDERR);
if (errChannel != (Tcl_Channel) NULL) {
Tcl_WriteObj(errChannel, Tcl_GetObjResult(interp));
Tcl_WriteChars(errChannel, "\n", 1);
}
} else if (isPtr->tty) {
Tcl_Obj *resultPtr = Tcl_GetObjResult(interp);
Tcl_Channel outChannel = Tcl_GetStdChannel(TCL_STDOUT);
Tcl_IncrRefCount(resultPtr);
Tcl_GetStringFromObj(resultPtr, &length);
if ((length >0) && (outChannel != (Tcl_Channel) NULL)) {
Tcl_WriteObj(outChannel, resultPtr);
Tcl_WriteChars(outChannel, "\n", 1);
}
Tcl_DecrRefCount(resultPtr);
}
/*
* If a tty stdin is still around, output a prompt.
*/
prompt:
if (isPtr->tty && (isPtr->input != (Tcl_Channel) NULL)) {
Prompt(interp, &(isPtr->prompt));
isPtr->input = Tcl_GetStdChannel(TCL_STDIN);
}
}
/*
*----------------------------------------------------------------------
*
* Prompt --
*
* Issue a prompt on standard output, or invoke a script
* to issue the prompt.
*
* Results:
* None.
*
* Side effects:
* A prompt gets output, and a Tcl script may be evaluated
* in interp.
*
*----------------------------------------------------------------------
*/
static void
Prompt(interp, promptPtr)
Tcl_Interp *interp; /* Interpreter to use for prompting. */
PromptType *promptPtr; /* Points to type of prompt to print.
* Filled with PROMPT_NONE after a
* prompt is printed. */
{
Tcl_Obj *promptCmdPtr;
int code;
Tcl_Channel outChannel, errChannel;
if (*promptPtr == PROMPT_NONE) {
return;
}
promptCmdPtr = Tcl_GetVar2Ex(interp,
((*promptPtr == PROMPT_CONTINUE) ? "tcl_prompt2" : "tcl_prompt1"),
NULL, TCL_GLOBAL_ONLY);
if (Tcl_InterpDeleted(interp)) {
return;
}
if (promptCmdPtr == NULL) {
defaultPrompt:
outChannel = Tcl_GetStdChannel(TCL_STDOUT);
if ((*promptPtr == PROMPT_START)
&& (outChannel != (Tcl_Channel) NULL)) {
Tcl_WriteChars(outChannel, "% ", 2);
}
} else {
code = Tcl_EvalObjEx(interp, promptCmdPtr, TCL_EVAL_GLOBAL);
if (code != TCL_OK) {
Tcl_AddErrorInfo(interp,
"\n (script that generates prompt)");
errChannel = Tcl_GetStdChannel(TCL_STDERR);
if (errChannel != (Tcl_Channel) NULL) {
Tcl_WriteObj(errChannel, Tcl_GetObjResult(interp));
Tcl_WriteChars(errChannel, "\n", 1);
}
goto defaultPrompt;
}
}
outChannel = Tcl_GetStdChannel(TCL_STDOUT);
if (outChannel != (Tcl_Channel) NULL) {
Tcl_Flush(outChannel);
}
*promptPtr = PROMPT_NONE;
}