diff -r 000000000000 -r 08ec8eefde2f persistentstorage/sqlite3api/TEST/TclScript/incrblob.test
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/persistentstorage/sqlite3api/TEST/TclScript/incrblob.test	Fri Jan 22 11:06:30 2010 +0200
@@ -0,0 +1,621 @@
+# 2007 May 1
+#
+# The author disclaims copyright to this source code.  In place of
+# a legal notice, here is a blessing:
+#
+#    May you do good and not evil.
+#    May you find forgiveness for yourself and forgive others.
+#    May you share freely, never taking more than you give.
+#
+#***********************************************************************
+#
+# $Id: incrblob.test,v 1.21 2008/09/11 11:28:00 danielk1977 Exp $
+#
+
+set testdir [file dirname $argv0]
+source $testdir/tester.tcl
+
+ifcapable {!autovacuum || !pragma || !incrblob} {
+  finish_test
+  return
+}
+
+do_test incrblob-1.1 {
+  execsql {
+    CREATE TABLE blobs(k PRIMARY KEY, v BLOB);
+    INSERT INTO blobs VALUES('one', X'0102030405060708090A');
+    INSERT INTO blobs VALUES('two', X'0A090807060504030201');
+  }
+} {}
+
+do_test incrblob-1.2.1 {
+  set ::blob [db incrblob blobs v 1]
+  string match incrblob_* $::blob
+} {1}
+unset -nocomplain data
+do_test incrblob-1.2.2 {
+  binary scan [read $::blob] c* data
+  set data
+} {1 2 3 4 5 6 7 8 9 10}
+do_test incrblob-1.2.3 {
+  seek $::blob 0
+  puts -nonewline $::blob "1234567890"
+  flush $::blob
+} {}
+do_test incrblob-1.2.4 {
+  seek $::blob 0
+  binary scan [read $::blob] c* data
+  set data
+} {49 50 51 52 53 54 55 56 57 48}
+do_test incrblob-1.2.5 {
+  close $::blob
+} {}
+do_test incrblob-1.2.6 {
+  execsql {
+    SELECT v FROM blobs WHERE rowid = 1;
+  }
+} {1234567890}
+
+#--------------------------------------------------------------------
+# Test cases incrblob-1.3.X check that it is possible to read and write
+# regions of a blob that lie on overflow pages.
+#
+do_test incrblob-1.3.1 {
+  set ::str "[string repeat . 10000]"
+  execsql {
+    INSERT INTO blobs(rowid, k, v) VALUES(3, 'three', $::str);
+  }
+} {}
+
+do_test incrblob-1.3.2 {
+  set ::blob [db incrblob blobs v 3]
+  seek $::blob 8500
+  read $::blob 10
+} {..........}
+do_test incrblob-1.3.3 {
+  seek $::blob 8500
+  puts -nonewline $::blob 1234567890
+} {}
+do_test incrblob-1.3.4 {
+  seek $::blob 8496
+  read $::blob 10
+} {....123456}
+do_test incrblob-1.3.10 {
+  close $::blob
+} {}
+
+#------------------------------------------------------------------------
+# incrblob-2.*: 
+#
+# Test that the following operations use ptrmap pages to reduce
+# unnecessary reads:
+#
+#     * Reading near the end of a blob,
+#     * Writing near the end of a blob, and
+#     * SELECT a column value that is located on an overflow page.
+#
+proc nRead {db} {
+  set bt [btree_from_db $db]
+  db_enter $db
+  array set stats [btree_pager_stats $bt]
+  db_leave $db
+  return $stats(read)
+}
+proc nWrite {db} {
+  set bt [btree_from_db $db]
+  db_enter $db
+  array set stats [btree_pager_stats $bt]
+  db_leave $db
+  return $stats(write)
+}
+
+sqlite3_soft_heap_limit 0
+
+foreach AutoVacuumMode [list 0 1] {
+
+  if {$AutoVacuumMode>0} {
+    ifcapable !autovacuum {
+      break
+    }
+  }
+
+  db close
+  file delete -force test.db test.db-journal
+
+  sqlite3 db test.db
+  execsql "PRAGMA auto_vacuum = $AutoVacuumMode"
+
+  do_test incrblob-2.$AutoVacuumMode.1 {
+    set ::str [string repeat abcdefghij 2900]
+    execsql {
+      BEGIN;
+      CREATE TABLE blobs(k PRIMARY KEY, v BLOB, i INTEGER);
+      DELETE FROM blobs;
+      INSERT INTO blobs VALUES('one', $::str || randstr(500,500), 45);
+      COMMIT;
+    }
+    expr [file size test.db]/1024
+  } [expr 31 + $AutoVacuumMode]
+
+  ifcapable autovacuum {
+    do_test incrblob-2.$AutoVacuumMode.2 {
+      execsql {
+        PRAGMA auto_vacuum;
+      }
+    } $AutoVacuumMode
+  }
+
+  do_test incrblob-2.$AutoVacuumMode.3 {
+    # Open and close the db to make sure the page cache is empty.
+    db close
+    sqlite3 db test.db
+  
+    # Read the last 20 bytes of the blob via a blob handle.
+    set ::blob [db incrblob blobs v 1]
+    seek $::blob -20 end
+    set ::fragment [read $::blob]
+    close $::blob
+  
+    # If the database is not in auto-vacuum mode, the whole of
+    # the overflow-chain must be scanned. In auto-vacuum mode,
+    # sqlite uses the ptrmap pages to avoid reading the other pages.
+    #
+    nRead db
+  } [expr $AutoVacuumMode ? 4 : 30]
+
+  do_test incrblob-2.$AutoVacuumMode.4 {
+    string range [db one {SELECT v FROM blobs}] end-19 end
+  } $::fragment
+
+  do_test incrblob-2.$AutoVacuumMode.5 {
+    # Open and close the db to make sure the page cache is empty.
+    db close
+    sqlite3 db test.db
+  
+    # Write the second-to-last 20 bytes of the blob via a blob handle.
+    #
+    set ::blob [db incrblob blobs v 1]
+    seek $::blob -40 end
+    puts -nonewline $::blob "1234567890abcdefghij"
+    flush $::blob
+  
+    # If the database is not in auto-vacuum mode, the whole of
+    # the overflow-chain must be scanned. In auto-vacuum mode,
+    # sqlite uses the ptrmap pages to avoid reading the other pages.
+    #
+    nRead db
+  } [expr $AutoVacuumMode ? 4 : 30]
+
+  # Pages 1 (the write-counter) and 32 (the blob data) were written.
+  do_test incrblob-2.$AutoVacuumMode.6 {
+    close $::blob
+    nWrite db
+  } 2
+
+  do_test incrblob-2.$AutoVacuumMode.7 {
+    string range [db one {SELECT v FROM blobs}] end-39 end-20
+  } "1234567890abcdefghij"
+
+  do_test incrblob-2.$AutoVacuumMode.8 {
+    # Open and close the db to make sure the page cache is empty.
+    db close
+    sqlite3 db test.db
+
+    execsql { SELECT i FROM blobs } 
+  } {45}
+
+  do_test incrblob-2.$AutoVacuumMode.9 {
+    nRead db
+  } [expr $AutoVacuumMode ? 4 : 30]
+}
+sqlite3_soft_heap_limit $soft_limit
+
+#------------------------------------------------------------------------
+# incrblob-3.*: 
+#
+# Test the outcome of trying to write to a read-only blob handle.
+#
+do_test incrblob-3.1 {
+  set ::blob [db incrblob -readonly blobs v 1]
+  seek $::blob -40 end
+  read $::blob 20
+} "1234567890abcdefghij"
+do_test incrblob-3.2 {
+  seek $::blob 0
+  set rc [catch {
+    puts -nonewline $::blob "helloworld"
+  } msg]
+  close $::blob
+  list $rc $msg
+} "1 {channel \"$::blob\" wasn't opened for writing}"
+
+do_test incrblob-3.3 {
+  set ::blob [db incrblob -readonly blobs v 1]
+  seek $::blob -40 end
+  read $::blob 20
+} "1234567890abcdefghij"
+do_test incrblob-3.4 {
+  set rc [catch {
+    sqlite3_blob_write $::blob 20 "qwertyuioplkjhgfds" 
+  } msg]
+  list $rc $msg
+} {1 SQLITE_READONLY}
+catch {close $::blob}
+
+#------------------------------------------------------------------------
+# incrblob-4.*: 
+#
+# Try a couple of error conditions:
+#
+#     4.1 - Attempt to open a row that does not exist.
+#     4.2 - Attempt to open a column that does not exist.
+#     4.3 - Attempt to open a table that does not exist.
+#     4.4 - Attempt to open a database that does not exist.
+#
+#     4.5 - Attempt to open an integer
+#     4.6 - Attempt to open a real value
+#     4.7 - Attempt to open an SQL null
+#
+#     4.8 - Attempt to open an indexed column for writing
+#     4.9 - Attempt to open an indexed column for reading (this works)
+#
+#     4.11 - Attempt to open a column of a view.
+#     4.12 - Attempt to open a column of a virtual table.
+#
+do_test incrblob-4.1 {
+  set rc [catch {
+    set ::blob [db incrblob blobs v 2]
+  } msg ] 
+  list $rc $msg
+} {1 {no such rowid: 2}}
+do_test incrblob-4.2 {
+  set rc [catch {
+    set ::blob [db incrblob blobs blue 1]
+  } msg ] 
+  list $rc $msg
+} {1 {no such column: "blue"}}
+do_test incrblob-4.3 {
+  set rc [catch {
+    set ::blob [db incrblob nosuchtable blue 1]
+  } msg ]
+  list $rc $msg
+} {1 {no such table: main.nosuchtable}}
+do_test incrblob-4.4 {
+  set rc [catch {
+    set ::blob [db incrblob nosuchdb blobs v 1]
+  } msg ] 
+  list $rc $msg
+} {1 {no such table: nosuchdb.blobs}}
+
+do_test incrblob-4.5 {
+  set rc [catch {
+    set ::blob [db incrblob blobs i 1]
+  } msg ] 
+  list $rc $msg
+} {1 {cannot open value of type integer}}
+do_test incrblob-4.6 {
+  execsql {
+    INSERT INTO blobs(k, v, i) VALUES(123, 567.765, NULL);
+  }
+  set rc [catch {
+    set ::blob [db incrblob blobs v 2]
+  } msg ] 
+  list $rc $msg
+} {1 {cannot open value of type real}}
+do_test incrblob-4.7 {
+  set rc [catch {
+    set ::blob [db incrblob blobs i 2]
+  } msg ] 
+  list $rc $msg
+} {1 {cannot open value of type null}}
+
+do_test incrblob-4.8 {
+  execsql {
+    INSERT INTO blobs(k, v, i) VALUES(X'010203040506070809', 'hello', 'world');
+  }
+  set rc [catch {
+    set ::blob [db incrblob blobs k 3]
+  } msg ] 
+  list $rc $msg
+} {1 {cannot open indexed column for writing}}
+
+do_test incrblob-4.9.1 {
+  set rc [catch {
+    set ::blob [db incrblob -readonly blobs k 3]
+  } msg]
+} {0}
+do_test incrblob-4.9.2 {
+  binary scan [read $::blob] c* c
+  close $::blob
+  set c
+} {1 2 3 4 5 6 7 8 9}
+
+do_test incrblob-4.10 {
+  set ::blob [db incrblob -readonly blobs k 3]
+  set rc [catch { sqlite3_blob_read $::blob 10 100 } msg]
+  list $rc $msg
+} {1 SQLITE_ERROR}
+do_test incrblob-4.10.2 {
+  close $::blob
+} {}
+
+ifcapable view {
+  do_test incrblob-4.11 {
+    execsql { CREATE VIEW blobs_view AS SELECT k, v, i FROM blobs }
+    set rc [catch { db incrblob blobs_view v 3 } msg]
+    list $rc $msg
+  } {1 {cannot open view: blobs_view}}
+}
+ifcapable vtab {
+  register_echo_module [sqlite3_connection_pointer db]
+  do_test incrblob-4.12 {
+    execsql { CREATE VIRTUAL TABLE blobs_echo USING echo(blobs) }
+    set rc [catch { db incrblob blobs_echo v 3 } msg]
+    list $rc $msg
+  } {1 {cannot open virtual table: blobs_echo}}
+}
+
+
+#------------------------------------------------------------------------
+# incrblob-5.*: 
+#
+#     Test that opening a blob in an attached database works.
+#
+ifcapable attach {
+  do_test incrblob-5.1 {
+    file delete -force test2.db test2.db-journal
+    set ::size [expr [file size [info script]]]
+    execsql {
+      ATTACH 'test2.db' AS aux;
+      CREATE TABLE aux.files(name, text);
+      INSERT INTO aux.files VALUES('this one', zeroblob($::size));
+    }
+    set fd  [db incrblob aux files text 1]
+    fconfigure $fd -translation binary
+    set fd2 [open [info script]]
+    fconfigure $fd2 -translation binary
+    puts -nonewline $fd [read $fd2]
+    close $fd
+    close $fd2
+    set ::text [db one {select text from aux.files}]
+    string length $::text
+  } [file size [info script]]
+  do_test incrblob-5.2 {
+    set fd2 [open [info script]]
+    fconfigure $fd2 -translation binary
+    set ::data [read $fd2]
+    close $fd2
+    set ::data
+  } $::text
+}
+
+# free memory
+unset -nocomplain ::data
+unset -nocomplain ::text
+
+#------------------------------------------------------------------------
+# incrblob-6.*: 
+#
+#     Test that opening a blob for write-access is impossible if
+#     another connection has the database RESERVED lock.
+#
+#     Then test that blob writes that take place inside of a
+#     transaction are not visible to external connections until
+#     after the transaction is commited and the blob channel 
+#     closed.
+#
+sqlite3_soft_heap_limit 0
+do_test incrblob-6.1 {
+  sqlite3 db2 test.db
+  execsql {
+    BEGIN;
+    INSERT INTO blobs(k, v, i) VALUES('a', 'different', 'connection');
+  } db2
+} {}
+do_test incrblob-6.2 {
+  execsql {
+    SELECT rowid FROM blobs
+  }
+} {1 2 3}
+do_test incrblob-6.3 {
+  set rc [catch {
+    db incrblob blobs v 1
+  } msg]
+  list $rc $msg
+} {1 {database is locked}}
+do_test incrblob-6.4 {
+  set rc [catch {
+    db incrblob blobs v 3
+  } msg]
+  list $rc $msg
+} {1 {database is locked}}
+do_test incrblob-6.5 {
+  set ::blob [db incrblob -readonly blobs v 3]
+  read $::blob
+} {hello}
+do_test incrblob-6.6 {
+  close $::blob
+} {}
+
+do_test incrblob-6.7 {
+  set ::blob [db2 incrblob blobs i 4]
+  gets $::blob
+} {connection}
+do_test incrblob-6.8 {
+  tell $::blob
+} {10}
+do_test incrblob-6.9 {
+  seek $::blob 0
+  puts -nonewline $::blob "invocation"
+  flush $::blob
+} {}
+
+# At this point rollback or commit should be illegal (because 
+# there is an open blob channel).
+do_test incrblob-6.10 {
+  catchsql {
+    ROLLBACK;
+  } db2
+} {1 {cannot rollback transaction - SQL statements in progress}}
+do_test incrblob-6.11 {
+  catchsql {
+    COMMIT;
+  } db2
+} {1 {cannot commit transaction - SQL statements in progress}}
+
+do_test incrblob-6.12 {
+  execsql {
+    SELECT * FROM blobs WHERE rowid = 4;
+  }
+} {}
+do_test incrblob-6.13 {
+  close $::blob
+  execsql {
+    COMMIT;
+  } db2
+} {}
+do_test incrblob-6.14 {
+  execsql {
+    SELECT * FROM blobs WHERE rowid = 4;
+  }
+} {a different invocation}
+db2 close
+sqlite3_soft_heap_limit $soft_limit
+
+#-----------------------------------------------------------------------
+# The following tests verify the behaviour of the incremental IO
+# APIs in the following cases:
+#
+#     7.1 A row that containing an open blob is modified.
+#
+#     7.2 A CREATE TABLE requires that an overflow page that is part
+#         of an open blob is moved.
+#
+#     7.3 An INCREMENTAL VACUUM moves an overflow page that is part
+#         of an open blob.
+#
+# In the first case above, correct behaviour is for all subsequent
+# read/write operations on the blob-handle to return SQLITE_ABORT.
+# More accurately, blob-handles are invalidated whenever the table
+# they belong to is written to.
+#
+# The second two cases have no external effect. They are testing
+# that the internal cache of overflow page numbers is correctly
+# invalidated.
+#
+do_test incrblob-7.1.0 {
+  execsql {
+    BEGIN;
+    DROP TABLE blobs;
+    CREATE TABLE t1 (a, b, c, d BLOB);
+    INSERT INTO t1(a, b, c, d) VALUES(1, 2, 3, 4);
+    COMMIT;
+  }
+} {}
+
+foreach {tn arg} {1 "" 2 -readonly} {
+
+  execsql {
+    UPDATE t1 SET d = zeroblob(10000);
+  }
+
+  do_test incrblob-7.1.$tn.1 {
+    set ::b [eval db incrblob $arg t1 d 1]
+    binary scan [sqlite3_blob_read $::b 5000 5] c* c
+    set c
+  } {0 0 0 0 0}
+  do_test incrblob-7.1.$tn.2 {
+    execsql {
+      UPDATE t1 SET d = 15;
+    }
+  } {}
+  do_test incrblob-7.1.$tn.3 {
+    set rc [catch { sqlite3_blob_read $::b 5000 5 } msg]
+    list $rc $msg
+  } {1 SQLITE_ABORT}
+  do_test incrblob-7.1.$tn.4 {
+    execsql {
+      SELECT d FROM t1;
+    }
+  } {15}
+  do_test incrblob-7.1.$tn.5 {
+    set rc [catch { close $::b } msg]
+    list $rc $msg
+  } {0 {}}
+  do_test incrblob-7.1.$tn.6 {
+    execsql {
+      SELECT d FROM t1;
+    }
+  } {15}
+
+}
+
+set fd [open [info script]]
+fconfigure $fd -translation binary
+set ::data [read $fd 14000]
+close $fd
+
+db close
+file delete -force test.db test.db-journal
+sqlite3 db test.db
+
+do_test incrblob-7.2.1 {
+  execsql {
+    PRAGMA auto_vacuum = "incremental";
+    CREATE TABLE t1(a INTEGER PRIMARY KEY, b);        -- root@page3
+    INSERT INTO t1 VALUES(123, $::data);
+  }
+  set ::b [db incrblob -readonly t1 b 123]
+  fconfigure $::b -translation binary
+  read $::b
+} $::data
+do_test incrblob-7.2.2 {
+  execsql {
+    CREATE TABLE t2(a INTEGER PRIMARY KEY, b);        -- root@page4
+  }
+  seek $::b 0
+  read $::b
+} $::data
+do_test incrblob-7.2.3 {
+  close $::b
+  execsql {
+    SELECT rootpage FROM sqlite_master;
+  }
+} {3 4}
+
+set ::otherdata "[string range $::data 0 1000][string range $::data 1001 end]"
+do_test incrblob-7.3.1 {
+  execsql {
+    INSERT INTO t2 VALUES(456, $::otherdata);
+  }
+  set ::b [db incrblob -readonly t2 b 456]
+  fconfigure $::b -translation binary
+  read $::b
+} $::otherdata
+do_test incrblob-7.3.2 {
+  expr [file size test.db]/1024
+} 30
+do_test incrblob-7.3.3 {
+  execsql {
+    DELETE FROM t1 WHERE a = 123;
+    PRAGMA INCREMENTAL_VACUUM(0);
+  }
+  seek $::b 0
+  read $::b
+} $::otherdata
+
+# Attempt to write on a read-only blob.  Make sure the error code
+# gets set.  Ticket #2464.
+#
+do_test incrblob-7.4 {
+  set rc [catch {sqlite3_blob_write $::b 10 HELLO} msg]
+  lappend rc $msg
+} {1 SQLITE_READONLY}
+do_test incrblob-7.5 {
+  sqlite3_errcode db
+} {SQLITE_READONLY}
+do_test incrblob-7.6 {
+  sqlite3_errmsg db
+} {attempt to write a readonly database}
+
+finish_test