diff -r 000000000000 -r 08ec8eefde2f traceservices/tracefw/integ_test/ost/TEF/te_ostv2integsuite_performance/testdata/scripts/te_perf_guidelines_disabled.script --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/traceservices/tracefw/integ_test/ost/TEF/te_ostv2integsuite_performance/testdata/scripts/te_perf_guidelines_disabled.script Fri Jan 22 11:06:30 2010 +0200 @@ -0,0 +1,226 @@ +// Copyright (c) 2007-2009 Nokia Corporation and/or its subsidiary(-ies). +// All rights reserved. +// This component and the accompanying materials are made available +// under the terms of "Eclipse Public License v1.0" +// which accompanies this distribution, and is available +// at the URL "http://www.eclipse.org/legal/epl-v10.html". +// +// Initial Contributors: +// Nokia Corporation - initial contribution. +// +// Contributors: +// +// Description: +// + +//! @File +//! @SYMTestSuiteName te_perf_guidelines_disabled.script +//! @SYMScriptTestEnvironment TEF + + +LOAD_SUITE te_ostv2integsuite_disabled + +PRINT Start Notification API performance tests. + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering on +PRINT Component ID Filtering on +PRINT GroupID filter matches trace point, +PRINT Component ID filter matches trace point. + +PRINT COMPILED out + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0001 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0001 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering on, Component ID Filtering on, GroupID filter matches trace point, Component ID filter matches trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering on, Component ID Filtering on, GroupID filter matches trace point, Component ID filter matches trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes.. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_gon_con_gmatch_cmatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0001 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering on +PRINT Component ID Filtering on +PRINT GroupID filter matches trace point, +PRINT Component ID filter doesn't match trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0002 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0002 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering on, Component ID Filtering on, GroupID filter matches trace point, Component ID filter doesn't match trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering on, Component ID Filtering on, GroupID filter matches trace point, Component ID filter doesn't match trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_gon_con_gmatch_cmismatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0002 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering on +PRINT Component ID Filtering on +PRINT GroupID filter doesn't match trace point, +PRINT Component ID filter matches trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0003 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0003 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering on, Component ID Filtering on, GroupID filter doesn't match trace point, Component ID filter matches trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering on, Component ID Filtering on, GroupID filter doesn't match trace point, Component ID filter matches trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_gon_con_gmismatch_cmatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0003 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering on +PRINT Component ID Filtering off +PRINT GroupID filter matches trace point, +PRINT Component ID filter doesn't match trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0004 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0004 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering on, Component ID Filtering off, GroupID filter matches trace point, Component ID filter doesn't match trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering on, Component ID Filtering off, GroupID filter matches trace point, Component ID filter doesn't match trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_gon_coff_gmatch_cmismatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0004 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering on +PRINT Component ID Filtering off +PRINT GroupID filter doesn't match trace point, +PRINT Component ID filter match matches trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0005 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0005 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering on, Component ID Filtering off, GroupID filter doesn't match trace point, Component ID filter matches trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering on, Component ID Filtering off, GroupID filter doesn't match trace point, Component ID filter matches trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_gon_coff_gmismatch_cmatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0005 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering off +PRINT Component ID Filtering on +PRINT GroupID filter doesn't match trace point, +PRINT Component ID filter match matches trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0006 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0006 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering off, Component ID Filtering on, GroupID filter doesn't match trace point, Component ID filter matches trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering off, Component ID Filtering on, GroupID filter doesn't match trace point, Component ID filter matches trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_goff_con_gmismatch_cmatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0006 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering off +PRINT Component ID Filtering on +PRINT GroupID filter matches trace point, +PRINT Component ID filter match doesn't match trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0007 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0007 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering off, Component ID Filtering on, GroupID filter matches trace point, Component ID filter doesn't match trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering off, Component ID Filtering on, GroupID filter matches trace point, Component ID filter doesn't match trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_goff_con_gmatch_cmismatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0007 + + +PRINT Run UPT tests for the config where: +PRINT GroupID filtering off +PRINT Component ID Filtering off +PRINT GroupID filter matches trace point, +PRINT Component ID filter match doesn't match trace point. + +PRINT COMPILED OUT + +START_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0008 +//! @SYMTestCaseID DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0008 +//! @SYMTestCaseDesc Run ADP37 advanced performance test for OSTv2 API+TraceControl, with trace build time compiled out, GroupID filtering off, Component ID Filtering off, GroupID filter matches trace point, Component ID filter doesn't match trace point +//! @SYMTestPriority Critical +//! @SYMTestActions Calculate the typical and minimum times taken for trace APIs (compiled out, GroupID filtering off, Component ID Filtering off, GroupID filter matches trace point, Component ID filter doesn't match trace point) and run configs specified in the te_perf_default.ini config file. Output to te_apitestresults.csv along with its stack usage. +//! @SYMTestExpectedResults Verify that there has not been any significant change in the performance figures from previous runs, other than expected by source code changes. +//! @SYMTestType ST +//! @SYMTESTSTATUS Implemented +//! @SYMPREQ PREQ2390 +//! @SYMREQ 12115 12122 12761 + START_TEST_BLOCK 10000 te_ostv2integsuite_disabled \testdata\configs\te_perf_goff_coff_gmatch_cmatch.ini + CREATE_OBJECT TCMPerformance TCMPerformance + COMMAND TCMPerformance doTest TESTONE + END_TEST_BLOCK +END_TESTCASE DT-DEBUG-TRACE-OSTv2-TraceContolSMGOPTPerfDisabled-0008 + + +PRINT End of Notification API performance tests.