/*
* Copyright (c) 2002-2010 Nokia Corporation and/or its subsidiary(-ies).
* All rights reserved.
* This component and the accompanying materials are made available
* under the terms of the License "Eclipse Public License v1.0"
* which accompanies this distribution, and is available
* at the URL "http://www.eclipse.org/legal/epl-v10.html".
*
* Initial Contributors:
* Nokia Corporation - initial contribution.
*
* Contributors:
*
* Description: ECom interface implementation definition
*
*/
/*
* %version: 21.1.1 %
*/
#ifndef WLANMGMTIMPL_H
#define WLANMGMTIMPL_H
#include "rwlmserver.h"
#include "genscanlist.h"
#include "wlanmgmtclient.h"
#include "wlanscaninfoimpl.h"
const TInt32 KRssMin = 0;
const TInt32 KRssMax = 100;
const TInt32 KRssHysteresisMin = 0;
const TInt32 KRssHysteresisMax = 100;
class CWlanScanRequest;
class CWlanAvailableIapsRequest;
class CProtectedSetupRequest;
/**
* Implementation for MWlanMgmtInterface interface.
*
* This class uses services from RWLMServer class to implement
* most of the required functionality.
*
* @lib wlanmgmtimpl.dll
* @since Series 60 3.0
*/
class CWlanMgmtImpl : public CWlanMgmtClient, public MWLMNotify
{
public: // Methods
// Constructors and destructor
/**
* Static constructor.
*/
static CWlanMgmtImpl* NewL();
/**
* Destructor.
*/
virtual ~CWlanMgmtImpl();
// New methods
/**
* Used to indicate completion of asynchronous scan request.
*
* @param aStatus Status of the request.
*/
void ScanComplete(
TInt aStatus );
/**
* Used to indicate completion of asynchronous GetAvailableIaps() request.
*
* @param aStatus Status of the request.
*/
void AvailableIapsComplete(
TInt aStatus );
// Methods from base classes
/**
* (From MWlanMgmtInterface) Activate the notification service.
*
* After the client has enabled the notification service, it can
* receive asynchronous notifications from the server.
*
* @param aCallback The class that implements the callback interface.
*/
virtual void ActivateNotificationsL(
MWlanMgmtNotifications& aCallback );
/**
* (From MWlanMgmtInterface) Cancel the notification service.
*/
virtual void CancelNotifications();
/**
* (From MWlanMgmtInterface) Perform a broadcast scan and return the detected WLAN networks.
*
* @param aResults Results of the scan.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetScanResults(
CWlanScanInfo& aResults );
/**
* (From MWlanMgmtInterface) Perform a broadcast scan and return the detected WLAN networks.
*
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aResults Results of the scan.
*/
virtual void GetScanResults(
TRequestStatus& aStatus,
CWlanScanInfo& aResults );
/**
* (From MWlanMgmtInterface) Get the BSSID of the BSS currently connected to.
*
* @remark This method can only be used while successfully connected to
* a WLAN network.
* @param aBssid BSSID of the currently connected BSS.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetConnectionBssid(
TWlanBssid& aBssid );
/**
* (From MWlanMgmtInterface) Get the SSID of the WLAN network currently connected to.
*
* @remark This method can only be used while successfully connected to
* a WLAN network.
* @param aSsid SSID of the currently connected network.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetConnectionSsid(
TWlanSsid& aSsid );
/**
* (From MWlanMgmtInterface) Get the current Received Signal Strength Indicator (RSSI).
*
* @remark This method can only be used while successfully connected to
* a WLAN network.
* @param aSignalQuality Current RSSI.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetConnectionSignalQuality(
TInt32& aSignalQuality );
/**
* (From MWlanMgmtInterface) Get the mode of the WLAN connection.
*
* @param aMode The current mode of the connection.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetConnectionMode(
TWlanConnectionMode& aMode );
/**
* (From MWlanMgmtInterface) Get the currently used security mode of the WLAN connection.
*
* @remark This method can only be used while successfully connected to
* a WLAN network.
* @param aMode The security mode of the connection.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
* @deprecated This method is offered for backward compatibility reasons,
* GetExtendedConnectionSecurityMode() should be used instead.
*/
virtual TInt GetConnectionSecurityMode(
TWlanConnectionSecurityMode& aMode );
/**
* (From MWlanMgmtInterface) Get the available WLAN IAPs.
*
* @param aAvailableIaps Array of IAP IDs available.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetAvailableIaps(
RArray<TUint>& aAvailableIaps );
/**
* (From MWlanMgmtInterface) Get the available WLAN IAPs.
*
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aAvailableIaps Array of IAP IDs available.
*/
virtual void GetAvailableIaps(
TRequestStatus& aStatus,
RArray<TUint>& aAvailableIaps );
/**
* (From MWlanMgmtInterface)
* Get the available WLAN IAPs.
*
* @param aCacheLifetime Defines how many seconds old cached results the client
* is willing to accept. The valid is range is from 0 to
* 60 seconds. The value of -1 means the system default will
* be used. The aCacheLifetime parameter has a meaning only
* when the aMaxDelay parameter is zero.
* Value will be changed to the actual value used by the
* system.
* @param aMaxDelay Maximum amount of seconds the client is willing to wait for
* the availability results. The valid range is from 0 to 1200
* seconds.
* Value will be changed to the actual value used by the system.
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aAvailableIaps Array of IAP IDs available.
*/
virtual void GetAvailableIaps(
TInt& aCacheLifetime,
TUint& aMaxDelay,
TRequestStatus& aStatus,
RArray<TUint>& aAvailableIaps );
/**
* (From MWlanMgmtInterface) Notify the server about changed WLAN settings.
*/
virtual void NotifyChangedSettings();
/**
* (From MWlanMgmtInterface)
* Adds a bssid to the blacklist
*
* @param aBssid The BSSID of the accesspoint.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt AddBssidToBlacklist(
const TWlanBssid& aBssid );
/**
* Updates the RSS notification class boundaries.
*
* @param aRssLevelBoundary Specifies the RSS level when a signal level notification
* should be given. This boundary is used when signal level
* is getting worse (see next parameter).
* @param aHysteresis Specifies the difference between RSS notification trigger levels
* of declining and improving signal quality, i.e. since aRssLevelBoundary
* specifies the level boundary for declining signal, the same boundary
* for improving signal is ( aRssLevelBoundary - aHysteresis ).
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt UpdateRssNotificationBoundary(
const TInt32 aRssLevelBoundary,
const TInt32 aHysteresis );
/**
* (From MWlanMgmtInterface)
* Perform a direct scan for an SSID and return the detected WLAN networks.
* If the SSID has zero length, a broadcast scan will be done.
*
* @param aSsid name of the WLAN network
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aResults Results of the scan.
*/
virtual void GetScanResults(
TWlanSsid& aSsid,
TRequestStatus& aStatus,
CWlanScanInfo& aResults );
/**
* (From MWlanMgmtInterface)
* Perform a direct scan for an SSID and return the detected WLAN networks.
* If the SSID has zero length, a broadcast scan will be done.
*
* @param aCacheLifetime Defines how many seconds old cached results the client
* is willing to accept. The valid is range is from 0 to
* 60 seconds. The value of -1 means the system default will
* be used. The aCacheLifetime parameter has a meaning only
* when the aMaxDelay parameter is zero.
* Value will be changed to the actual value used by the
* system.
* @param aMaxDelay Maximum amount of seconds the client is willing to wait for
* the scan results. The valid range is from 0 to 1200 seconds.
* Value will be changed to the actual value used by the system.
* @param aSsid Name of the WLAN network.
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aResults Results of the scan.
*/
virtual void GetScanResults(
TInt& aCacheLifetime,
TUint& aMaxDelay,
TWlanSsid& aSsid,
TRequestStatus& aStatus,
CWlanScanInfo& aResults );
/**
* (From MWlanMgmtInterface)
* Start Protected Setup.
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aId Service ID of network which user has selected to be configured.
* @param aCredentials Results of a successful Protected Setup operation.
*/
virtual void RunProtectedSetup(
TRequestStatus& aStatus,
TUint32 aId,
CArrayFixSeg<TWlanProtectedSetupCredentialAttribute>& aCredentials );
/**
* (From MWlanMgmtInterface)
* Cancel an outstanding Protected Setup operation.
*/
virtual void CancelProtectedSetup();
/**
* (From MWlanMgmtInterface)
* Cancel an outstanding scan request.
*/
virtual void CancelGetScanResults();
/**
* (From MWlanMgmtInterface)
* Cancel an outstanding IAP availability request.
*/
virtual void CancelGetAvailableIaps();
/**
* (From MWlanMgmtInterface)
* Add a list of SSIDs to the given IAP ID.
*
* The list of SSIDs is matched against the scan results during IAP availability
* check and the corresponding IAP marked as available if a match is found.
*
* @param aIapId IAP ID the list is attached to.
* @param aSsidList List of SSIDs. Any previous list attached will be overwritten.
* @return KErrNone if the list was successfully added, an error code otherwise.
*/
virtual TInt AddIapSsidList(
TUint aIapId,
const CArrayFixFlat<TWlanSsid>& aSsidList );
/**
* (From MWlanMgmtInterface)
* Remove any list of SSIDs attached to the given IAP ID.
*
* @param aIapId IAP ID the list is attached to.
* @return KErrNone if the list was successfully removed, an error code otherwise.
*/
virtual TInt RemoveIapSsidList(
TUint aIapId );
/**
* (From MWlanMgmtInterface)
* Get the currently used security mode of the WLAN connection.
*
* @remark This method can only be used while successfully connected to
* a WLAN network.
* @param aMode The security mode of the connection.
* @return KErrNone if successful, otherwise one of the system-wide
* error codes.
*/
virtual TInt GetExtendedConnectionSecurityMode(
TWlanConnectionExtentedSecurityMode& aMode );
/**
* (From MWlanMgmtInterface)
* Activate the extended notification service.
*
* After the client has enabled the notification service, it can
* receive asynchronous notifications from the server.
*
* @param aCallback The class that implements the callback interface.
* @param aCallbackInterfaceVersion The callback interface version implemented by
* the client.
*/
virtual void ActivateExtendedNotificationsL(
MWlanMgmtNotifications& aCallback,
TUint aCallbackInterfaceVersion );
/**
* (From MWlanMgmtInterface)
* Create a virtual traffic stream.
*
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aStreamParameters Traffic stream parameters to use.
* @param aStreamId Contains the ID assigned to this traffic stream
* on successful completion.
* @param aStreamStatus Contains the status of the traffic stream
* on successful completion.
*/
virtual void CreateTrafficStream(
TRequestStatus& aStatus,
const TWlanTrafficStreamParameters& aStreamParameters,
TUint& aStreamId,
TWlanTrafficStreamStatus& aStreamStatus );
/**
* (From MWlanMgmtInterface)
* Cancel an outstanding traffic stream creation request.
*/
virtual void CancelCreateTrafficStream();
/**
* (From MWlanMgmtInterface)
* Delete a virtual traffic stream.
*
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aStreamId ID of the traffic stream to delete.
*/
virtual void DeleteTrafficStream(
TRequestStatus& aStatus,
TUint aStreamId );
/**
* (From MWlanMgmtInterface)
* Cancel an outstanding traffic stream deletion request.
*/
virtual void CancelDeleteTrafficStream();
/**
* (From MWlanMgmtInterface)
* Initiate a roam to the given BSSID.
*
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aBssid BSSID to roam to. If set to FF:FF:FF:FF:FF:FF address,
* search for a better BSS is initiated.
*/
virtual void DirectedRoam(
TRequestStatus& aStatus,
const TWlanBssid& aBssid );
/**
* (From MWlanMgmtInterface)
* Cancel an outstanding directed roam request.
*/
virtual void CancelDirectedRoam();
/**
* Used to indicate completion of asynchronous Protected Setup request.
* @param aStatus Status of the request.
*/
void ProtectedSetupComplete(
TInt aStatus );
/**
* (From MWlanMgmtInterface)
* Start aggressive background scanning.
* @param aInterval Scan interval for aggressive mode (in seconds).
* Valid range: 1-120 seconds.
*/
virtual TInt StartAggressiveBgScan(
TUint aInterval );
/**
* (From MWlanMgmtInterface)
* Get the available WLAN IAPs.
*
* @param aCacheLifetime Defines how many seconds old cached results the client
* is willing to accept. The valid is range is from 0 to
* 60 seconds. The value of -1 means the system default will
* be used. The aCacheLifetime parameter has a meaning only
* when the aMaxDelay parameter is zero.
* Value will be changed to the actual value used by the
* system.
* @param aMaxDelay Maximum amount of seconds the client is willing to wait for
* the availability results. The valid range is from 0 to 1200
* seconds or KWlanInfiniteScanDelay. KWlanInfiniteScanDelay
* will never cause a scan, but the request will be
* completed when any other broadcast scan request is completed.
* Value will be changed to the actual value used by the system.
* @param aFilteredResults Whether availability is filtered based on signal strength.
ETrue if filtering is allowed, EFalse if not.
* @param aStatus Status of the calling active object. On successful
* completion contains KErrNone, otherwise one of the
* system-wide error codes.
* @param aAvailableIaps Array of IAPs available.
*/
virtual void GetAvailableIaps(
TInt& aCacheLifetime,
TUint& aMaxDelay,
TBool aFilteredResults,
TRequestStatus& aStatus,
RArray<TWlanIapAvailabilityData>& aAvailableIaps );
protected: // Methods
/**
* (From MWLMNotify) Connection status has changed.
*
* @aParam aNewState specifies the new state
*/
virtual void ConnectionStateChanged(
TWlanConnectionState aNewState );
/**
* (From MWLMNotify) BSSID has changed (i.e. AP handover)
*
* @aParam aNewBSSID specifies the new BSSID (access point name).
*/
virtual void BSSIDChanged(
TDesC8& aNewBSSID );
/**
* (From MWLMNotify) Connection has lost.
*/
virtual void BSSLost();
/**
* (From MWLMNotify) Connection has regained.
*/
virtual void BSSRegained();
/**
* (From MWLMNotify) New networks have been detected during scan.
*/
virtual void NewNetworksDetected();
/**
* (From MWLMNotify) One or more networks have been lost since
* the last scan.
*/
virtual void OldNetworksLost();
/**
* (From MWLMNotify) The used transmit power has been changed.
*
* @param aPower The transmit power in mW.
*/
virtual void TransmitPowerChanged(
TUint aPower );
/**
* (From MWLMNotify) Received signal strength has changed to another strength class.
*
* @param specifies the rss class (normal/weak)
* @param aRcpValue specifies the actual rss value
*/
virtual void RcpChanged(
TWlanRCPLevel aRcpLevel,
TUint aRcpValue );
/**
* (From MWLMNotify) The status of a virtual traffic stream has changed.
*
* @param aStreamId ID of the traffic stream.
* @param aStreamStatus Status of the traffic stream.
*/
virtual void TrafficStreamStatusChanged(
TUint aStreamId,
TWlanTrafficStreamStatus aStreamStatus );
private: // Methods
/**
* C++ default constructor.
*/
CWlanMgmtImpl();
/**
* Symbian 2nd phase constructor.
*/
void ConstructL();
private: // Data
// Interface to RWLMServer
RWLMServer iServer;
// Active Object for handling asynchronous scan requests
CWlanScanRequest* iScanRequest;
// Status of the client active object for scan. Not owned by this class.
TRequestStatus* iPendingScanStatus;
// Active Object for handling asynchronous GetAvailableIaps requests
CWlanAvailableIapsRequest* iAvailableIapsRequest;
// Status of the client active object for GetAvailableIaps(). Not owned by this class.
TRequestStatus* iPendingAvailableIapsStatus;
// Client notification callback. Not owned by this class.
MWlanMgmtNotifications* iClientNotification;
// Active Object for handling asynchronous Protected Setup requests
CProtectedSetupRequest* iProtectedSetupRequest;
// Status of the client active object for Protected Setup. Not owned by this class.
TRequestStatus* iPendingProtectedSetupStatus;
// How old cached results (in seconds) the client is willing to accept. Not used
// in GetAvailableIaps and GetScanResults which have aCacheLifetime and aMaxDelay
// parameters.
TInt iCacheLifetime;
// Maximum time (in seconds) the client is willing to wait for the scan results. Not
// used in GetAvailableIaps and GetScanResults which have aCacheLifetime and aMaxDelay
// parameters.
TUint iMaxDelay;
};
/**
* Class for handling asynchronous scan requests.
*/
class CWlanScanRequest : public CActive
{
public: // Methods
// Constructors and destructor
/**
* C++ default constructor.
* @param aCallback Callback interface to CWlanMgmtImpl.
* @param aServer Interface to RWLMServer.
* @param aScanInfo The scan results are stored here.
* @param aSsid name of the network
* @param aCacheLifetime how old cached results (in seconds) the client is willing to accept.
* @param aMaxDelay maximum time (in seconds) the client is willing to wait for the scan results.
*/
CWlanScanRequest(
CWlanMgmtImpl& aCallback,
RWLMServer& aServer,
CWlanScanInfoImpl& aScanInfo,
const TWlanSsid& aSsid,
TInt& aCacheLifetime,
TUint& aMaxDelay );
/**
* Destructor.
*/
virtual ~CWlanScanRequest();
// New methods
/**
* Issues a new request and indicates the active scheduler
* of an outstanding request.
*/
void IssueRequest();
protected: // Methods
// Methods from base classes
/**
* (From CActive) Called when the request has been completed.
*/
virtual void RunL();
/**
* (From CActive) Called by the framework if RunL leaves.
* @param aError The error code RunL leaved with.
* @return One of the system-wide error codes.
*/
virtual TInt RunError(
TInt aError );
/**
* (From CActive) Called by the framework as part of AO's Cancel().
*/
virtual void DoCancel();
private: // Data
// Callback interface to CWlanMgmtImpl
CWlanMgmtImpl& iCallback;
// Interface to RWLMServer
RWLMServer& iServer;
// Handle to the scan list.
CWlanScanInfoImpl& iScanInfo;
// SSID to scan for.
TWlanSsid iSsid;
// How old cached results (in seconds) the client is willing to accept
TInt& iCacheLifetime;
// Maximum time (in seconds) the client is willing to wait for the scan results.
TUint& iMaxDelay;
};
/**
* Class for handling asynchronous GetAvailableIaps() requests.
*/
class CWlanAvailableIapsRequest : public CActive
{
public: // Methods
// Constructors and destructor
/**
* C++ default constructor.
* @param aCallback Callback interface to CWlanMgmtImpl.
* @param aServer Interface to RWLMServer.
* @param aAvailableIaps Available IAPs are stored here.
* @param aCacheLifetime how old cached results (in seconds) the client is willing to accept.
* @param aMaxDelay maximum time the client is willing to wait for the scan results.
*/
CWlanAvailableIapsRequest(
CWlanMgmtImpl& aCallback,
RWLMServer& aServer,
RArray<TUint>& aAvailableIaps,
TInt& aCacheLifetime,
TUint& aMaxDelay );
/**
* C++ default constructor.
* @param aCallback Callback interface to CWlanMgmtImpl.
* @param aServer Interface to RWLMServer.
* @param aAvailableIaps Available IAPs are stored here.
* @param aCacheLifetime how old cached results (in seconds) the client is willing to accept.
* @param aMaxDelay maximum time the client is willing to wait for the scan results.
* @param aFilteredResults Whether availability is filtered based on signal strength.
*/
CWlanAvailableIapsRequest(
CWlanMgmtImpl& aCallback,
RWLMServer& aServer,
RArray<TWlanIapAvailabilityData>& aAvailableIaps,
TInt& aCacheLifetime,
TUint& aMaxDelay,
TBool aFilteredResults );
/**
* Destructor.
*/
virtual ~CWlanAvailableIapsRequest();
// New methods
/**
* Issues a new request and indicates the active scheduler
* of an outstanding request.
*/
void IssueRequest();
protected: // Methods
// Methods from base classes
/**
* (From CActive) Called when the request has been completed.
*/
virtual void RunL();
/**
* (From CActive) Called by the framework if RunL leaves.
* @param aError The error code RunL leaved with.
* @return One of the system-wide error codes.
*/
virtual TInt RunError(
TInt aError );
/**
* (From CActive) Called by the framework as part of AO's Cancel().
*/
virtual void DoCancel();
private: // Data
// Callback interface to CWlanMgmtImpl
CWlanMgmtImpl& iCallback;
// Interface to RWLMServer
RWLMServer& iServer;
// Handle to client storage for available IAP IDs for legacy methods.
// Not owned by this pointer.
RArray<TUint>* iPendingAvailableIapIds;
// Handle to client storage for available IAPs.
// Not owned by this pointer.
RArray<TWlanIapAvailabilityData>* iPendingAvailableIaps;
// Storage for available IAPs
TWlmAvailableIaps iAvailableIaps;
// The package buffer needed for the asynchronous request
TPckg<TWlmAvailableIaps> iAvailableIapsBuf;
// The package buffer needed for the asynchronous request
TPckg<TInt> iCacheLifetimeBuf;
// The package buffer needed for the asynchronous request
TPckg<TUint> iMaxDelayBuf;
// Whether availability is filtered based on signal strength.
TBool iFilteredResults;
};
/**
* Class for handling asynchronous Protected Setup requests.
*/
class CProtectedSetupRequest : public CActive
{
public: // Methods
// Constructors and destructor
/**
* C++ default constructor.
* @param aCallback Callback interface to CWlanMgmtImpl.
* @param aServer Interface to RWLMServer.
* @param aId Service ID of network which user has selected to be configured.
* @param aCredentials Results of a successful Protected Setup operation.
*/
CProtectedSetupRequest(
CWlanMgmtImpl& aCallback,
RWLMServer& aServer,
TUint32 aId,
CArrayFixSeg<TWlanProtectedSetupCredentialAttribute>& aCredentials );
/**
* Destructor.
*/
virtual ~CProtectedSetupRequest();
// New methods
/**
* Issues a new request and indicates the active scheduler
* of an outstanding request.
*/
void IssueRequest();
protected: // Methods
// Methods from base classes
/**
* (From CActive) Called when the request has been completed.
*/
virtual void RunL();
/**
* (From CActive) Called by the framework if RunL leaves.
* @param aError The error code RunL leaved with.
* @return One of the system-wide error codes.
*/
virtual TInt RunError(
TInt aError );
/**
* (From CActive) Called by the framework as part of AO's Cancel().
*/
virtual void DoCancel();
private: // Data
// Callback interface to CWlanMgmtImpl
CWlanMgmtImpl& iCallback;
// Interface to RWLMServer
RWLMServer& iServer;
// Service ID of network which user has selected to be configured.
TUint32 iServiceId;
// Results of a successful Protected Setup operation.
CArrayFixSeg<TWlanProtectedSetupCredentialAttribute>& iCredentials;
// Storage for received credentials.
TWlmProtectedSetupCredentials iCredentialsStorage;
// The package buffer needed for the asynchronous request.
TPckg<TWlmProtectedSetupCredentials> iCredentialsBuf;
};
#endif // WLANMGMTIMPL_H