--- a/Symbian3/PDK/Source/GUID-2988AB7C-F8BB-5917-BB22-A57C0CC56C73.dita Tue Jul 20 12:00:49 2010 +0100
+++ b/Symbian3/PDK/Source/GUID-2988AB7C-F8BB-5917-BB22-A57C0CC56C73.dita Fri Aug 13 16:47:46 2010 +0100
@@ -1,193 +1,193 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->
-<!-- This component and the accompanying materials are made available under the terms of the License
-"Eclipse Public License v1.0" which accompanies this distribution,
-and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->
-<!-- Initial Contributors:
- Nokia Corporation - initial contribution.
-Contributors:
--->
-<!DOCTYPE concept
- PUBLIC "-//OASIS//DTD DITA Concept//EN" "concept.dtd">
-<concept id="GUID-2988AB7C-F8BB-5917-BB22-A57C0CC56C73" xml:lang="en"><title> Configuring
-the base_perf_f32_env.ini File</title><shortdesc> Describes the common configuration items for each test case that
-can be configured in the <filepath>base_perf_f32_env.ini</filepath> file. </shortdesc><prolog><metadata><keywords/></metadata></prolog><conbody>
-<p><note> Changing this configuration file has an impact on the entire test
-suite as each test uses the contents of this file for its specific test scenario.</note> </p>
-<p>The configurable items in the <filepath>base_perf_f32_env.ini</filepath> file
-are listed in the following table: </p>
-<table id="GUID-07452553-4920-527F-BA4D-713189B04D04">
-<tgroup cols="2"><colspec colname="col0"/><colspec colname="col1"/>
-<tbody>
-<row>
-<entry><p> <b>Field name</b> </p> </entry>
-<entry><p> <b>Description</b> </p> </entry>
-</row>
-<row>
-<entry><p>csvFileName </p> </entry>
-<entry><p>Defines the default name of the <filepath>.CSV</filepath> file and
-its location. The data within this parameter can be in one of the following
-formats: </p> <p> <filepath> <Drive Letter>: \<name of file>.csv</filepath> </p> <p>-
-OR - </p> <p> <filepath><Drive Letter>: \<location>\<name of
- file>.csv</filepath> </p> <p>The <filepath>.CSV</filepath> file
-contains readable test results. By default, this file is named <filepath>f32-perfResults.csv</filepath> and
-is stored in the <filepath>C:</filepath> drive. </p> <p><note> This value
-is used by all test cases.</note> </p> </entry>
-</row>
-<row>
-<entry><p>threadname </p> </entry>
-<entry><p>Defines the default name of the thread handle to be created, for
-all test cases. </p> </entry>
-</row>
-<row>
-<entry><p>stacksize </p> </entry>
-<entry><p>Defines a default integer that specifies the stack size allocated
-to the thread handle. The default is set to <b>0x2000</b>. </p> <p>This value
-is used by all test cases. </p> </entry>
-</row>
-<row>
-<entry><p>minheapsize </p> </entry>
-<entry><p>Defines a default integer value that specifies the minimum heap
-size allocated to the thread handle. By default, this is set to <b>256 KB</b> or <b>0x100</b>. </p> <p><note> This
-value is used by all test cases. </note></p> </entry>
-</row>
-<row>
-<entry><p>maxheapsize </p> </entry>
-<entry><p>Defines a default value that specifies the maximum heap size allocated
-to the thread handle. By default, this is set to <b>1 MB</b> or <b>0x100</b>. </p> <note><p> This
-value is used by all test cases. </p></note> </entry>
-</row>
-<row>
-<entry><p>ownertype </p> </entry>
-<entry><p>Defines a default <codeph>TOwnerType</codeph> enumeration value
-that defines the ownership of this thread handle. By default, this is set
-to <codeph>EOwnerProcess</codeph>. </p> <note><p> This value is used by all
-test cases. </p></note> </entry>
-</row>
-<row>
-<entry><p>threadpriority </p> </entry>
-<entry><p>Defines a default <codeph>TThreadPriority</codeph> enumeration value
-that defines the priority of the thread handle. By default, this is set to <codeph>EPriorityLess</codeph>. </p> <note><p> This
-value is used by all test cases. </p></note> </entry>
-</row>
-<row>
-<entry><p>driveName </p> </entry>
-<entry><p>Default writable drive. This drive is used for creating a temporary
-test directory structure for test cases. </p> <p>This value must be the character
-of the drive, followed by a semicolon. The default value is <filepath>E:</filepath>.
-The data within this parameter must be in the following format: </p> <p> <filepath><Drive
-Letter>:</filepath> </p> <p><note> Modifying this value impacts the location
-where the test cases create its test directory structure, and also the location
-on which the tests performs their operations. </note></p> </entry>
-</row>
-<row>
-<entry><p>formatDrive </p> </entry>
-<entry><p>Defines a boolean value that indicates whether a drive is to be
-formatted during a test. This must be a boolean value. By default, it is set
-to <codeph>EFalse</codeph>. </p> <p><note> This value is used by all test
-cases. </note></p> </entry>
-</row>
-<row>
-<entry><p>baseDirName </p> </entry>
-<entry><p>Defines the name of the parent test directory used to store the
-test directory. The data within this parameter must be in the following format: </p> <p> <filepath>{Default,
-driveName}\< name of base directory>\</filepath> </p> <note><p> This value
-is used by all test cases. Therefore, altering this value affects all test
-cases. </p> </note></entry>
-</row>
-<row>
-<entry><p>subDirName </p> </entry>
-<entry><p>Defines the name of the actual test directory that is used for storing
-test files. Each sub-directory created has the same name. For example, if
-the name of the test directory is <filepath>dir</filepath>, the first directory
-that will be created is <filepath>dir</filepath>, the second sub-directory
-created is also called <b>dir</b>, and so on. </p> <p>Ensure that this name
-does not contain a dot character (‘.’). </p> <note><p> This value is used
-by all test cases. Therefore, altering this value affects all test cases. </p></note> </entry>
-</row>
-<row>
-<entry><p>fileBaseName </p> </entry>
-<entry><p>Defines the name of the test file that is used for each test case.
-Each file will be appended with an incrementing number. For example, if the
-file base name is <filepath>file.txt</filepath> then the name of the first
-file that will be created is <filepath>file1.txt</filepath>. Ensure that the
-name of the file does contain a dot character (‘.’). You can use one of the
-following formats: </p> <p> <filepath><name of file>.<extension name></filepath> </p> <p>-
-OR - </p> <p> <filepath> <name of file></filepath> </p> <note><p> This
-value is used by all test cases. Therefore, altering this value affects all
-test cases. </p></note> </entry>
-</row>
-<row>
-<entry><p>fileData </p> </entry>
-<entry><p>Defines the content of each file created. </p> <note><p> This value
-is used by all test cases. </p></note> </entry>
-</row>
-<row>
-<entry><p>dirTreeDepth </p> </entry>
-<entry><p>Defines an integer number that represents the default number of
-directories to be created in the base directory. </p> <p>This value is used
-by all test cases. Therefore, altering this value affects all test cases,
-and the test directory structure that each test case creates and uses. </p> <note><p> Based
-on the actual size of the directory structure that is created, use an MMC
-card of an appropriate size. </p></note> </entry>
-</row>
-<row>
-<entry><p>numOfFiles </p> </entry>
-<entry><p>Defines an integer number that represents the default number of
-files to create in each directory. </p> <p>This value is used by all test
-cases. Therefore, altering this value affects all test cases, and the test
-directory structure that each test case creates and uses. </p> <note><p> Based
-on the actual size of the directory structure that is created, use an MMC
-card of an appropriate size. </p></note> </entry>
-</row>
-<row>
-<entry><p>fileSize </p> </entry>
-<entry><p>Defines an integer number that represents the default file size
-(in bytes) of each file to create. By default, this is set to <b>128 Kb</b> or <b>1024
-x128 bytes</b>. </p> <note><p> Modifying this value affects all tests within
-this suite, as all test cases use this file size while creating files for
-its test directory structure. Also note that the block sizes you are using
-while manipulating the file size as RFile write API tests are also affected.
-For example, if you are using a <codeph>blockSize</codeph> of 65536 bytes
-for <codeph>XLBytes</codeph>, ensure that the file size set is equal to or
-greater than 131072 bytes. As you cannot write 65536 bytes to a file that
-has a set size of less than (blockSize + blockSize). </p></note> </entry>
-</row>
-<row>
-<entry><p>XSBytes </p> </entry>
-<entry><p>Defines an integer number that represents a <codeph>blockSize</codeph> (in
-bytes) that can either be read into a file or written to a file. Modifying
-this value affects all RFile read test cases and all RFile write test cases. </p> <p> <b> XSBytes</b> represents
-an extra small number of bytes. By default, this value is 16 bytes. </p> </entry>
-</row>
-<row>
-<entry><p>SBytes </p> </entry>
-<entry><p>Defines an integer number that represents a blockSize in bytes that
-can either be read into a file or written to a file. Modifying this value
-affects all RFile read test cases and all RFile write test cases. </p> <p> <b> SBytes</b> represents
-a small number of bytes. By default, this value is 512 bytes. </p> </entry>
-</row>
-<row>
-<entry><p>MBytes </p> </entry>
-<entry><p>Defines an integer number that represents a blockSize in bytes that
-can either be read into a file or written to a file. Modifying this value
-affects all RFile read test cases and all RFile write test cases. </p> <p> <b> MBytes</b> represents
-a medium number of bytes. By default, this value is 512 bytes. </p> </entry>
-</row>
-<row>
-<entry><p>LBytes </p> </entry>
-<entry><p>Defines an integer number that represents a blockSize in bytes that
-can either be read into a file or written to a file. Modifying this value
-affects all RFile read test cases and all RFile write test cases. </p> <p> <b>LBytes</b> represents
-a large number of bytes. By default, this value is 32768 bytes. </p> </entry>
-</row>
-<row>
-<entry><p>XLBytes </p> </entry>
-<entry><p>Defines an integer number that represents a blockSize in bytes that
-can either be read into a file or written to a file. Modifying this value
-affects all RFile read test cases and all RFile write test cases. </p> <p> <b> XLBytes</b> represents
-an extra large number of bytes. By default, this value is 65536 bytes. </p> </entry>
-</row>
-</tbody>
-</tgroup>
+<?xml version="1.0" encoding="utf-8"?>
+<!-- Copyright (c) 2007-2010 Nokia Corporation and/or its subsidiary(-ies) All rights reserved. -->
+<!-- This component and the accompanying materials are made available under the terms of the License
+"Eclipse Public License v1.0" which accompanies this distribution,
+and is available at the URL "http://www.eclipse.org/legal/epl-v10.html". -->
+<!-- Initial Contributors:
+ Nokia Corporation - initial contribution.
+Contributors:
+-->
+<!DOCTYPE concept
+ PUBLIC "-//OASIS//DTD DITA Concept//EN" "concept.dtd">
+<concept id="GUID-2988AB7C-F8BB-5917-BB22-A57C0CC56C73" xml:lang="en"><title> Configuring
+the base_perf_f32_env.ini File</title><shortdesc> Describes the common configuration items for each test case that
+can be configured in the <filepath>base_perf_f32_env.ini</filepath> file. </shortdesc><prolog><metadata><keywords/></metadata></prolog><conbody>
+<p><note> Changing this configuration file has an impact on the entire test
+suite as each test uses the contents of this file for its specific test scenario.</note> </p>
+<p>The configurable items in the <filepath>base_perf_f32_env.ini</filepath> file
+are listed in the following table: </p>
+<table id="GUID-07452553-4920-527F-BA4D-713189B04D04">
+<tgroup cols="2"><colspec colname="col0"/><colspec colname="col1"/>
+<tbody>
+<row>
+<entry><p> <b>Field name</b> </p> </entry>
+<entry><p> <b>Description</b> </p> </entry>
+</row>
+<row>
+<entry><p>csvFileName </p> </entry>
+<entry><p>Defines the default name of the <filepath>.CSV</filepath> file and
+its location. The data within this parameter can be in one of the following
+formats: </p> <p> <filepath> <Drive Letter>: \<name of file>.csv</filepath> </p> <p>-
+OR - </p> <p> <filepath><Drive Letter>: \<location>\<name of
+ file>.csv</filepath> </p> <p>The <filepath>.CSV</filepath> file
+contains readable test results. By default, this file is named <filepath>f32-perfResults.csv</filepath> and
+is stored in the <filepath>C:</filepath> drive. </p> <p><note> This value
+is used by all test cases.</note> </p> </entry>
+</row>
+<row>
+<entry><p>threadname </p> </entry>
+<entry><p>Defines the default name of the thread handle to be created, for
+all test cases. </p> </entry>
+</row>
+<row>
+<entry><p>stacksize </p> </entry>
+<entry><p>Defines a default integer that specifies the stack size allocated
+to the thread handle. The default is set to <b>0x2000</b>. </p> <p>This value
+is used by all test cases. </p> </entry>
+</row>
+<row>
+<entry><p>minheapsize </p> </entry>
+<entry><p>Defines a default integer value that specifies the minimum heap
+size allocated to the thread handle. By default, this is set to <b>256 KB</b> or <b>0x100</b>. </p> <p><note> This
+value is used by all test cases. </note></p> </entry>
+</row>
+<row>
+<entry><p>maxheapsize </p> </entry>
+<entry><p>Defines a default value that specifies the maximum heap size allocated
+to the thread handle. By default, this is set to <b>1 MB</b> or <b>0x100</b>. </p> <note><p> This
+value is used by all test cases. </p></note> </entry>
+</row>
+<row>
+<entry><p>ownertype </p> </entry>
+<entry><p>Defines a default <codeph>TOwnerType</codeph> enumeration value
+that defines the ownership of this thread handle. By default, this is set
+to <codeph>EOwnerProcess</codeph>. </p> <note><p> This value is used by all
+test cases. </p></note> </entry>
+</row>
+<row>
+<entry><p>threadpriority </p> </entry>
+<entry><p>Defines a default <codeph>TThreadPriority</codeph> enumeration value
+that defines the priority of the thread handle. By default, this is set to <codeph>EPriorityLess</codeph>. </p> <note><p> This
+value is used by all test cases. </p></note> </entry>
+</row>
+<row>
+<entry><p>driveName </p> </entry>
+<entry><p>Default writable drive. This drive is used for creating a temporary
+test directory structure for test cases. </p> <p>This value must be the character
+of the drive, followed by a semicolon. The default value is <filepath>E:</filepath>.
+The data within this parameter must be in the following format: </p> <p> <filepath><Drive
+Letter>:</filepath> </p> <p><note> Modifying this value impacts the location
+where the test cases create its test directory structure, and also the location
+on which the tests performs their operations. </note></p> </entry>
+</row>
+<row>
+<entry><p>formatDrive </p> </entry>
+<entry><p>Defines a boolean value that indicates whether a drive is to be
+formatted during a test. This must be a boolean value. By default, it is set
+to <codeph>EFalse</codeph>. </p> <p><note> This value is used by all test
+cases. </note></p> </entry>
+</row>
+<row>
+<entry><p>baseDirName </p> </entry>
+<entry><p>Defines the name of the parent test directory used to store the
+test directory. The data within this parameter must be in the following format: </p> <p> <filepath>{Default,
+driveName}\< name of base directory>\</filepath> </p> <note><p> This value
+is used by all test cases. Therefore, altering this value affects all test
+cases. </p> </note></entry>
+</row>
+<row>
+<entry><p>subDirName </p> </entry>
+<entry><p>Defines the name of the actual test directory that is used for storing
+test files. Each sub-directory created has the same name. For example, if
+the name of the test directory is <filepath>dir</filepath>, the first directory
+that will be created is <filepath>dir</filepath>, the second sub-directory
+created is also called <b>dir</b>, and so on. </p> <p>Ensure that this name
+does not contain a dot character (‘.’). </p> <note><p> This value is used
+by all test cases. Therefore, altering this value affects all test cases. </p></note> </entry>
+</row>
+<row>
+<entry><p>fileBaseName </p> </entry>
+<entry><p>Defines the name of the test file that is used for each test case.
+Each file will be appended with an incrementing number. For example, if the
+file base name is <filepath>file.txt</filepath> then the name of the first
+file that will be created is <filepath>file1.txt</filepath>. Ensure that the
+name of the file does contain a dot character (‘.’). You can use one of the
+following formats: </p> <p> <filepath><name of file>.<extension name></filepath> </p> <p>-
+OR - </p> <p> <filepath> <name of file></filepath> </p> <note><p> This
+value is used by all test cases. Therefore, altering this value affects all
+test cases. </p></note> </entry>
+</row>
+<row>
+<entry><p>fileData </p> </entry>
+<entry><p>Defines the content of each file created. </p> <note><p> This value
+is used by all test cases. </p></note> </entry>
+</row>
+<row>
+<entry><p>dirTreeDepth </p> </entry>
+<entry><p>Defines an integer number that represents the default number of
+directories to be created in the base directory. </p> <p>This value is used
+by all test cases. Therefore, altering this value affects all test cases,
+and the test directory structure that each test case creates and uses. </p> <note><p> Based
+on the actual size of the directory structure that is created, use an MMC
+card of an appropriate size. </p></note> </entry>
+</row>
+<row>
+<entry><p>numOfFiles </p> </entry>
+<entry><p>Defines an integer number that represents the default number of
+files to create in each directory. </p> <p>This value is used by all test
+cases. Therefore, altering this value affects all test cases, and the test
+directory structure that each test case creates and uses. </p> <note><p> Based
+on the actual size of the directory structure that is created, use an MMC
+card of an appropriate size. </p></note> </entry>
+</row>
+<row>
+<entry><p>fileSize </p> </entry>
+<entry><p>Defines an integer number that represents the default file size
+(in bytes) of each file to create. By default, this is set to <b>128 Kb</b> or <b>1024
+x128 bytes</b>. </p> <note><p> Modifying this value affects all tests within
+this suite, as all test cases use this file size while creating files for
+its test directory structure. Also note that the block sizes you are using
+while manipulating the file size as RFile write API tests are also affected.
+For example, if you are using a <codeph>blockSize</codeph> of 65536 bytes
+for <codeph>XLBytes</codeph>, ensure that the file size set is equal to or
+greater than 131072 bytes. As you cannot write 65536 bytes to a file that
+has a set size of less than (blockSize + blockSize). </p></note> </entry>
+</row>
+<row>
+<entry><p>XSBytes </p> </entry>
+<entry><p>Defines an integer number that represents a <codeph>blockSize</codeph> (in
+bytes) that can either be read into a file or written to a file. Modifying
+this value affects all RFile read test cases and all RFile write test cases. </p> <p> <b> XSBytes</b> represents
+an extra small number of bytes. By default, this value is 16 bytes. </p> </entry>
+</row>
+<row>
+<entry><p>SBytes </p> </entry>
+<entry><p>Defines an integer number that represents a blockSize in bytes that
+can either be read into a file or written to a file. Modifying this value
+affects all RFile read test cases and all RFile write test cases. </p> <p> <b> SBytes</b> represents
+a small number of bytes. By default, this value is 512 bytes. </p> </entry>
+</row>
+<row>
+<entry><p>MBytes </p> </entry>
+<entry><p>Defines an integer number that represents a blockSize in bytes that
+can either be read into a file or written to a file. Modifying this value
+affects all RFile read test cases and all RFile write test cases. </p> <p> <b> MBytes</b> represents
+a medium number of bytes. By default, this value is 512 bytes. </p> </entry>
+</row>
+<row>
+<entry><p>LBytes </p> </entry>
+<entry><p>Defines an integer number that represents a blockSize in bytes that
+can either be read into a file or written to a file. Modifying this value
+affects all RFile read test cases and all RFile write test cases. </p> <p> <b>LBytes</b> represents
+a large number of bytes. By default, this value is 32768 bytes. </p> </entry>
+</row>
+<row>
+<entry><p>XLBytes </p> </entry>
+<entry><p>Defines an integer number that represents a blockSize in bytes that
+can either be read into a file or written to a file. Modifying this value
+affects all RFile read test cases and all RFile write test cases. </p> <p> <b> XLBytes</b> represents
+an extra large number of bytes. By default, this value is 65536 bytes. </p> </entry>
+</row>
+</tbody>
+</tgroup>
</table></conbody></concept>
\ No newline at end of file