common/tools/ats/smoketest/localisation/apparchitecture/tef/T_SysStartApparcStep.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/common/tools/ats/smoketest/localisation/apparchitecture/tef/T_SysStartApparcStep.cpp Fri Nov 27 12:22:12 2009 +0000
@@ -0,0 +1,231 @@
+// Copyright (c) 2005-2009 Nokia Corporation and/or its subsidiary(-ies).
+// All rights reserved.
+// This component and the accompanying materials are made available
+// under the terms of the License "Symbian Foundation License v1.0"
+// which accompanies this distribution, and is available
+// at the URL "http://www.symbianfoundation.org/legal/sfl-v10.html".
+//
+// Initial Contributors:
+// Nokia Corporation - initial contribution.
+//
+// Contributors:
+//
+// Description:
+//
+
+
+
+/**
+ @file
+ @internalComponent - Internal Symbian test code
+*/
+
+#include <s32file.h>
+
+#include "T_SysStartApparcStep.h"
+#include "tssaac\tssaac.h"
+
+_LIT(KApparcPanicFile,"c:\\T_SSAAC_PanicResultFile.txt");
+
+
+const TChar KDelimChar = '=';
+
+/**
+ The expected results are hard coded from the test specification.
+*/
+//Test case 1
+const TInt KExpectedStartApp1LRes1 = KErrNone;
+const TInt KExpectedStartApp1LRes2 = KErrNotFound;
+
+//Test case 99
+const TInt KExpectedLocalisedCaptionLRes1 = 0;
+const TInt KExpectedLocalisedCaptionLRes2 = 0;
+
+/**
+ Read the results of the individual tests. The test number is determined by
+ reading the configuration file z:\\apparctest\\TestCaseConfig.txt and then one
+ of two functions is called, one which handles tests which panic and one which
+ handles tests which don't.
+
+ Non-paniccing test results are read from file c:\\SysStartApparc_TestStartApp1L.txt
+ The order in which these results are written in CSysStartApparcTestCase::WriteResultFileL()
+ MUST match the order in which they are read and tested in CheckApparcResultsL()
+ The expected results are hard coded from the test specification.(see above)
+
+ Paniccing test results are read from file c:\\T_SSAAC_PanicResultFile.txt
+ The result is a '1 or 0' to represent a PASS or a FAIL The actual pass critria
+ are found in file sysstart_apparc_checkEpocWind.bat where the test is performed and
+ the T_SSAAC_PanicResultFile file created with the appropriate result
+
+*/
+
+/**
+ Read the results of the individual tests that do not panic. Currently, there is
+ only one test that does not panic. Results are read in from file SysStartApparc_TestStartApp1L.txt
+ and compared with the expected results
+
+*/
+void CT_SysStartApparcStep::CheckApparcResultsL()
+ {
+ RFs fs;
+ User::LeaveIfError(fs.Connect());
+ CleanupClosePushL(fs);
+
+ RFileReadStream reader;
+ User::LeaveIfError(reader.Open(fs, KSsaacResultFile, EFileRead));
+ CleanupClosePushL(reader);
+
+ TBuf8<64> myDes;
+ TInt ret = 0;
+
+ // Read 16 bits - StartApp1LRes1
+ reader.ReadL(myDes, KDelimChar);
+ ret = reader.ReadInt16L();
+
+ if(iTestcase == 1)
+ {
+ INFO_PRINTF3(_L("Test StartApp1LRes1 Count - Expected: %d, Actual: %d"), KExpectedStartApp1LRes1, ret);
+ TEST(ret==KExpectedStartApp1LRes1);
+ }
+ else
+ { // test case is 99
+ INFO_PRINTF3(_L("Test LocalisedCaptionLRes1 Count - Expected: %d, Actual: %d"), KExpectedLocalisedCaptionLRes1, ret);
+ TEST(ret==KExpectedLocalisedCaptionLRes1);
+ }
+
+ // Read 16 bits - StartApp1LRes2
+ reader.ReadL(myDes, KDelimChar);
+ ret = reader.ReadInt16L();
+
+ if(iTestcase == 1)
+ {
+ INFO_PRINTF3(_L("Test StartApp1LRes2 Count - Expected: %d, Actual: %d"), KExpectedStartApp1LRes2, ret);
+ TEST(ret==KExpectedStartApp1LRes2);
+ }
+ else // test cass is 99
+ {
+ INFO_PRINTF3(_L("Test LocalisedCaptionLRes2 Count - Expected: %d, Actual: %d"), KExpectedLocalisedCaptionLRes2, ret);
+ TEST(ret==KExpectedLocalisedCaptionLRes2);
+ }
+
+ // clean-up
+ CleanupStack::PopAndDestroy(2, &fs);
+ }
+
+/**
+ Read the results of the individual tests that panic. After a panic, the
+ batch file sysstartapparc_checkEpocWind.bat searched the EpocWind.out file
+ for lines of text that verify that a panic has occurred with the correct
+ KERN-EXEC number and then writes the result to a text file (pass=1, fail=0)
+ for processing here.
+
+*/
+void CT_SysStartApparcStep::CheckApparcPanicResultsL()
+ {
+ RFs fs;
+ User::LeaveIfError(fs.Connect());
+ INFO_PRINTF1(_L("File server connected"));
+
+ CleanupClosePushL(fs);
+
+ RFileReadStream reader;
+ User::LeaveIfError(reader.Open(fs, KApparcPanicFile, EFileRead));
+
+ CleanupClosePushL(reader);
+
+ TBuf8<64> myDes;
+
+ TInt expected = 1; //a PASS
+
+ //File containd a test name and a test result, Move past the test name
+ reader.ReadL(myDes, KDelimChar);
+
+ //Read the test result
+ reader.ReadL(myDes, KDelimChar);
+
+ // Read 16 bits - StartApp1LRes1
+ TChar result(reader.ReadUint8L());
+ TInt ret = result.GetNumericValue();
+ INFO_PRINTF3(_L("Test StartApp1LRes1 Count - Expected: %d, Actual: %d"), KTestResultPass, ret);
+ TEST(ret==expected);
+
+ // clean-up
+ CleanupStack::PopAndDestroy(2, &fs);
+ }
+
+
+/**
+ Destructor
+*/
+CT_SysStartApparcStep::~CT_SysStartApparcStep()
+ {
+ }
+
+/**
+ Constructor
+*/
+CT_SysStartApparcStep::CT_SysStartApparcStep()
+ {
+ // Call base class method to set up the human readable name for logging
+ SetTestStepName(KT_SysStartApparcStep);
+ }
+
+/**
+ Override of base class virtual.
+ @return - TVerdict code
+*/
+
+TVerdict CT_SysStartApparcStep::doTestStepL()
+ {
+ INFO_PRINTF1(_L("Test T_SysStartApparcStep: Started"));
+
+ __UHEAP_MARK;
+ TInt ret=KErrGeneral;
+ iTestcase=ReadConfigFileL();
+
+ //Test case 1 and 99 are the only tests that do not panic
+ if( (iTestcase==1) || (iTestcase==29) )
+ {
+ TRAP(ret, CheckApparcResultsL());
+ }
+ else
+ {
+ TRAP(ret, CheckApparcPanicResultsL());
+ }
+ INFO_PRINTF2(_L("CheckApparcResultsL ends with code %d"), ret);
+ TEST(ret==KErrNone);
+ __UHEAP_MARKEND;
+
+ INFO_PRINTF1(_L("Test T_SysStartApparcStep: Finished"));
+ return TestStepResult();
+ }
+
+/**
+Reads the input config file and returns the test case number
+Defined in sysstart_apparc_run.bat
+@return TInt - the test case number
+*/
+TInt CT_SysStartApparcStep::ReadConfigFileL()
+ {
+ RFs fs;
+ User::LeaveIfError(fs.Connect());
+ CleanupClosePushL(fs);
+
+ RFileReadStream reader;
+ User::LeaveIfError(reader.Open(fs, KApparcConfigFile, EFileRead));
+ CleanupClosePushL(reader);
+
+ TBuf8<255> aDes;
+ reader.ReadL(aDes, KDelimChar);
+
+ //Read in a two character representation of a number and convert to an integer
+ TChar result1(reader.ReadInt8L());
+ TChar result0(reader.ReadInt8L());
+ TInt aTestCase = result1.GetNumericValue()*10 + result0.GetNumericValue();
+
+ // clean-up
+ CleanupStack::PopAndDestroy(2, &fs);
+
+ return aTestCase;
+
+ }