Default constructor. Derived classes should implement a NewL() function to perform their two-phase construction.

TSerialNewL

Destructor.

Closes the owner (which is our CSerial ) and removes any timers.

Derived classes can implement the destructor but must only call synchronous functions within it. Any cleanup requiring asynchronous operations must be done in Destruct() .

Return true if there is an outstanding Read/Write/Break on the CSY.

Specifies the protocol for setting a break condition at the port. It is called by the comms server in response to a RComm::Break() request from the client.

When the break is complete, the function should call BreakCompleted() .

Specifies the protocol for cancelling a break request. It is called by the comms server in response to a RComm::BreakCancel() request from the client.

The implementation should abort any processing which was taking place as a result of the break request. Do not call BreakCompleted() .

Tells the comms server that a break request initiated through Break() is complete.

The comms server will then notify the client that its break request is complete.

Called by C32 server or CSY.

Tells the comms server that a request initiated through NotifyBreak() is complete.

The comms server will then notify the client that its request is complete.

Called by the CSY module.

Reserved virtual function.

Closes the port.

The base class implements CObject::Close() to handle reference counting on the port. It decrements the reference count, and calls Destruct() if the count is 0.

Perform a break making sure of the port's owner

Cancel outstanding break

Cancel any outstanding requests

Read capabilities

Get config

Get flow control state ON/OFF from CSY module

Get role DCE/DTE from CSY module

Get server config

Set break signal notifying on

Cancel outstanding break notification

Set configuration change (data format, speed, ...) notifying on

Cancel outstanding configuration change notification

Set input buffer data notifying on

Cancel outstanding input buffer data notification

Set flow control notifying on

Cancel outstanding flow control notification

Set output buffer empty notifying on

Cancel outstanding output buffer empty notification

Set DCE/DTE signal notifying on

Cancel outstanding signal notification

Set the receive buffer length

Perform a read making sure of the port's owner

Cancel outstanding read

read the receive buffer length

Set the receive buffer length

set the access mode

Cancels an outstanding set access request.

Set config

Set the receive buffer length

Set server config

Set signal lines

Clear signal lines

Read signals

Perform a write making sure of the port's owner

Cancel outstanding write

Tells the comms server that a request initiated through NotifyConfigChange() is complete.

The comms server will then notify the client that its request is complete.

Called by the CSY module.

Specifies the protocol for port destruction. It is called by the comms server when the last client-side reference to a CPort object has been closed and the CPort must be deleted. The comms server will not delete a CPort other than by calling Destruct() .

The implementation should perform any asynchronous shutdown operations on its own resources and, when these operations have completed, should delete this.

Set the access mode and signals for this port if the open request does not conflict with existing usage of this port by other clients.

cancel all outstanding requests and setup the preemted session

Tells the comms server that a request initiated through NotifyFlowControlChange() is complete.

The comms server will then notify the client that its request is complete.

Called by the CSY module.

Specifies a protocol by which the comms server can request the protocol to release memory. Typically, an implementation may be able to do this by reducing internal buffers.

The default behaviour is to do nothing.

Perform CPort based housekeeping before closing a session

Specifies a protocol for getting the port capabilities. It is called by the comms server in response to a RComm::Caps() request from the client.

Specifies a protocol for getting the current configuration of the serial port. It is called by the comms server in response to a RComm::GetConfig() request from the client.

Gets flow control status. It is called by the comms server in response to a RComm::SetMode() request from the client.

Specifies a protocol for requesting the size of the serial port buffers. It is called by the comms server in response to a RComm::ReceiveBufferLength() request from the client.

Gets DCE/DTE role. It is called by the comms server in response to a RComm::GetRole() request from the client.

Specifies a protocol for getting the buffer mode. It is called by the comms server in response to a RComm::Mode() request from the client.

Specifies a protocol for getting the status of the serial port control lines. It is called by the comms server in response to a RComm::GetSignals() request from the client.

Reads data from the client's (the user of the port's) address space.

The client address space pointer is obtained from the aClientBuffer argument to StartRead() .

Note:

This function is normally called by the CSY

Note:

Used as part of RComm::Write

RThread::ReadL() for more information on reading data in other address spaces.

Writes into the client's (the user of the port's) address space.

The client address space pointer is obtained from the aClientBuffer argument to StartWrite() .

Note:

This function is normally called by the CSY

Note:

Used as part of RComm::Read

RThread::WriteL() for more information on writing data to other address spaces.

Checks if a CommSetAccess() request is waiting for the port.

Specifies the protocol for setting a "break" notification. It is called by the comms server in response to a RComm::NotifyBreak() request from the client.

Specifies the protocol for cancelling a "break" notification. It is called by the comms server in response to a RComm::NotifyBreakCancel() request from the client.

Specifies the protocol for setting a "configuration change" notification. It is called by the comms server in response to a RComm::NotifyConfigChange() request from the client.

Specifies the protocol for cancelling a "configuration change" notification. It is called by the comms server in response to a RComm::NotifyConfigChangeCancel() request from the client.

Specifies the protocol for setting a "data available" notification. It is called

by the comms server in response to a RComm::NotifyDataAvailable() request from the client.

Specifies the protocol for cancelling a "data available" notification. It is called by the comms server in response to a RComm::NotifyDataAvailableCancel() request from the client.

Tells the comms server that a request initiated through NotifyDataAvailable() is complete.

The comms server will then notify the client that its request is complete.

Called by the CSY module.

Specifies the protocol for setting a "flow control change" notification. It is called by the comms server in response to a RComm::NotifyFlowControlChange() request from the client.

Specifies the protocol for cancelling a "flow control change" notification. It is called by the comms server in response to a RComm::NotifyFlowControlChangeCancel() request from the client.

Specifies the protocol for setting a transmit buffer empty notification. It is called by the comms server in response to a RComm::NotifyOutputEmpty() request from the client.

Specifies the protocol for cancelling a transmit buffer empty notification. It is called by the comms server in response to a RComm::NotifyOutputEmptyCancel() request from the client.

Tells the comms server that a request initiated through NotifyOutputEmpty() is complete.

The comms server will then notify the client that its request is complete.

Called by the CSY module.

Specifies the protocol for setting a "signal change" notification. It is called by the comms server in response to a RComm::NotifySignalChange() request from the client.

Specifies the protocol for cancelling a "signal change" notification. It is called by the comms server in response to a RComm::NotifySignalChangeCancel() request from the client.

Specifies a protocol for requesting the number of bytes that are currently waiting in the port's receive buffer. It is called by the comms server in response to a RComm::QueryReceiveBuffer() request from the client.

Specifies the protocol for cancelling reading from the port. It is called by the comms server in response to a RComm::ReadCancel() request from the client or when the iReadTimer timer expires.

The implementation should abort any processing which was taking place as a result of the read request. Do not call ReadCompleted() .

Tells the comms server that a read request initiated through StartRead() is complete.

The comms server will then notify the client that its read request is complete.

Called by C32 server or CSY.

This static function is called when the read timer expires. installed by CPort::CommRead as TCallBack

Specifies a protocol for resetting the receive and/or transmit buffers to zero length. It is called by the comms server in response to a RComm::ResetBuffers() request from the client.

returns true if session has been pre-empted

returns true if session is waiting for open

Specifies a protocol for setting the configuration of the port. It is called by the comms server in response to a RComm::SetConfig() request from the client.

Specifies a protocol for setting the size of the serial port buffers. It is called by the comms server in response to a RComm::SetReceiveBufferLength() request from the client.

Sets DCE/DTE role. It is called by the comms server in response to a RComm::Open() request from the client.

Specifies a protocol for setting the buffer mode. It is called by the comms server in response to a RComm::SetMode() request from the client.

Specifies a protocol for setting serial port control lines. It is called by the comms server in response to a RComm::SetSignals() request from the client.

Specifies a protocol for clearing serial port control lines. It is called by the comms server in response to a RComm::SetSignals() request from the client.

Tells the comms server that a request initiated through NotifySignalChange() is complete.

The comms server will then notify the client that its request is complete.

Called by the CSY module.

Specifies the protocol for reading from the port. It is called by the comms server in response to a RComm::Read() or RComm::ReadOneOrMore() request from the client.

A negative value for aLength is used to flag that the read request was from RComm::ReadOneOrMore() rather than from RComm::Read() . The maximum length of data to be read is the absolute value of aLength.

The implementation should use IPCWrite() to write the data to the client's buffer. When all the data has been read, the function should call ReadCompleted() .

Specifies the protocol for writing to the port. It is called by the comms server in response to a RComm::Write() request from the client.

The implementation should use IPCRead() to get the data to write from the client's buffer. When all the data has been written, the function should call WriteCompleted() .

We check that break notifying is not called twice at the same time

Check if a Break request is valid and take ownership of port

We check that config change notifying is not called twice at the same time

We check that flowcontrol notifying is not called twice at the same time

We check that input buffer data notifying is not called twice at the same time

We check that output buffer empty notifying is not called twice at the same time

Check if a Read request is valid and take ownership of port

We check that signal notifying is not called twice at the same time

Check if a Write request is valid and take ownership of port

Specifies the protocol for cancelling writing to the port. It is called by the comms server in response to a RComm::WriteCancel() request from the client.

The implementation should abort any processing which was taking place as a result of the write request. Do not call WriteCompleted() .

Tells the comms server that a write request initiated through StartWrite() is complete.

The comms server will then notify the client that its write request is complete.

Called by C32 server or CSY.

This static function is called when the write timer expires. installed by CPort::CommWrite as TCallBack

The encapsulated message

Private padding to preserve BC with earlier versions

The encapsulated message

Private padding to preserve BC with earlier versions

The encapsulated message

Private padding to preserve BC with earlier versions