// Copyright (c) 1999-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Symbian Foundation License v1.0" to Symbian Foundation members and "Symbian Foundation End User License Agreement v1.0" to non-members

// which accompanies this distribution, and is available

// at the URL "http://www.symbianfoundation.org/legal/licencesv10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// BT protocol wide types

// 

//

#ifndef _BTTYPES_H

#define _BTTYPES_H

#include <e32std.h>

#include <bluetooth/eirdatacodec.h>

/**

@publishedAll

@released

Minimum eSCO connection latency in milliseconds.  Attempts to specify less than this will be silently

increased to this level.

*/

static const TInt KMinESCOLatency = 4;

/**

@publishedAll

@released

Typedef to represent a HCI connection handle.

*/

typedef TUint16 THCIConnHandle;

/**

@publishedAll

@released

Bluetooth SIG specified values for specification of (piconet) role.

*/

enum TBTBasebandRole

	{

	EMaster			= 0x00, /*!< Master role */

	ESlave			= 0x01, /*!< Slave role */

	ERoleUnknown,			/*!< Unknown role */

	};

/**

@publishedAll

@released

Bluetooth SIG specified values for indicating link modes.

*/

enum TBTLinkMode

    {

    EActiveMode		= 0x00, /*!< Active mode */

    EHoldMode		= 0x01, /*!< Hold mode */

    ESniffMode		= 0x02, /*!< Sniff mode */

    EParkMode		= 0x04, /*!< Park mode */

	EScatterMode	= 0x08, /*!< Scatter mode */

    };

/**

@publishedAll

@released

Typedef to represent a union of TBTLinkMode values.

*/

typedef TUint32 TBTLinkModeSet;

/**

@publishedAll

@released

Bitmask values to help request combinations of link modes.

@see TBTLinkMode

*/

enum TBTLinkModeCombinations

	{

	EAnyLowPowerMode = (EHoldMode | ESniffMode | EParkMode | EScatterMode) /*!< Any low power mode */

	};

/**

@publishedAll

@released

Bluetooth SIG specified values for indicating packet types.

DM1, DH1, DM3, DH3, DM5, DH5 are ACL packet types

HV1, HV2, HV3 are SCO (synchronous link) packet types

*/

enum TBTPacketType

	{

	EPacketsDM1			= 0x0008, /*!< DM1 ACL packet type */

	EPacketsDH1			= 0x0010, /*!< DH1 ACL packet type */

	EPacketsDM3			= 0x0400, /*!< DM3 ACL packet type */

	EPacketsDH3			= 0x0800, /*!< DH3 ACL packet type */

	EPacketsDM5			= 0x4000, /*!< DM5 ACL packet type */

	EPacketsDH5			= 0x8000, /*!< DH5 ACL packet type */

	EPackets2_DH1		= 0x0002, /*!< 2-DH1 ACL packet type */

	EPackets3_DH1		= 0x0004, /*!< 3-DH1 ACL packet type */

	EPackets2_DH3		= 0x0100, /*!< 2-DH3 ACL packet type */

	EPackets3_DH3		= 0x0200, /*!< 3-DH3 ACL packet type */

	EPackets2_DH5		= 0x1000, /*!< 2-DH5 ACL packet type */

	EPackets3_DH5		= 0x2000, /*!< 3-DH5 ACL packet type */

	EPacketsHV1			= 0x0020, /*!< HV1 SCO packet type */

	EPacketsHV2			= 0x0040, /*!< HV2 SCO packet type */

	EPacketsHV3			= 0x0080, /*!< HV3 SCO packet type */

	};

/**

@publishedAll

@released

Typedef to represent a set of SCO packet types.

*/

typedef TUint16 TBTSCOPackets;

/**

@publishedAll

@released

Typedef to represent a set of ACL packet types.

*/

typedef TUint16 TBTACLPackets;

/**

@publishedAll

@released

Bitmask values to help request combinations of packets.

@see TBTPacketType

*/

enum TBTPacketTypeCombinations

	{

	EAnyACLPacket	 = EPacketsDM1 | EPacketsDM3 | EPacketsDM5 | EPacketsDH1 | EPacketsDH3 | EPacketsDH5, /*!< Any ACL packet */

	EAnyNonEdrACLPacket = EAnyACLPacket | EPackets2_DH1 | EPackets3_DH1 | EPackets2_DH3 | EPackets3_DH3 | EPackets2_DH5 | EPackets3_DH5, /*!< Any Non-EDR ACL packet */

	EAnySCOPacket	 = EPacketsHV1 | EPacketsHV2 | EPacketsHV3, /*!< Any SCO packet */

	EAnyPacket		= EAnyACLPacket | EAnySCOPacket  /*!< Any packet */

	};

/**

@publishedAll

@released

Typedef to represent a set of synchronous packet types (SCO and eSCO on v1.2).

@see TBTSyncPackets::TSyncPackets

*/

typedef TUint32 TBTSyncPacketTypes;

/**

@publishedAll

@deprecated

This constant is no longer needed to translate the SCO mapping of HV packet types to Synchronous

because CBluetoothSynchronousLink::SetupConnection(const TBTDevAddr& aBDAddr, const TUint16 aPacketTypes)

adjusts aPacketTypes internally on behalf of clients.

*/

static const TInt KSCOvsSyncHVOffset = 5;

/**

@publishedAll

@released

Class to represent a set of synchronous packet types (SCO and eSCO on v1.2).

This differs from TBTSyncPacketTypes as it is the interface used by CBluetoothSynchronousLink

in order to detect the difference between a pre and post eSCO caller.  This is necessary

as HV1 packets in the SCO numbering clash with EV5 packets in the sync numbering.

*/

NONSHARABLE_CLASS(TBTSyncPackets)

	{

	public:

		/**

		@publishedAll

		@released

		Individual synchronous packet types.

		@see TBTSyncPacketTypes

		*/

		enum TSyncPackets

			{

			ESyncPacketsHV1		= 0x10001,

			ESyncPacketsHV2		= 0x10002,

			ESyncPacketsHV3		= 0x10004,

			ESyncPacketsEV3		= 0x20008,

			ESyncPacketsEV4		= 0x20010,

			ESyncPacketsEV5		= 0x20020,

			ESyncAnySCOPacket	= ESyncPacketsHV1 | ESyncPacketsHV2 | ESyncPacketsHV3,

			ESyncAnyESCOPacket	= ESyncPacketsEV3 | ESyncPacketsEV4 | ESyncPacketsEV5

			};

	public:

		IMPORT_C explicit TBTSyncPackets(TBTSyncPacketTypes aPackets);

		IMPORT_C TBTSyncPacketTypes operator()() const;

	private:

		TUint32 iPacketTypes;

		// This data padding has been added to help prevent future binary compatibility breaks	

		// Neither iPadding1 nor iPadding2 have been zero'd because they are currently not used

		TUint32     iPadding1; 

		TUint32     iPadding2; 		

	};

/**

@publishedAll

@released

eSCO links can have different retransmission options, optimised for link usage,

power or reliability.

@see CBluetoothSynchronousLink::SetRetransmissionEffort

*/

enum TBTeSCORetransmissionTypes

	{

	EeSCORetransmitNone			= 0,

	EeSCORetransmitPower		= 1,

	EeSCORetransmitReliability	= 2,

	EeSCORetransmitDontCare		= 0xff

	};

/**

@publishedAll

@released

eSCO unspecified bandwidth.  This value can only be used by the accepting side

of an eSCO link, to allow any bandwidth to be specified by the initiator.

Otherwise both sides of the link must agree on the same bandwidth.

@see CBluetoothSynchronousLink::SetBandwidth

@see CBluetoothSynchronousLink::AcceptConnection

*/

static const TUint32 KESCOBandwidthDontCare = KMaxTUint32;

/**

@internalTechnology

Bit positions of the individual local and remote features.

@see TBTFeatures

*/

enum TBTSupportedFeaturesBits

	{

	ESupportedThreeSlotPacketsBit				= 0,  /*!< Three slot packets are supported */

	ESupportedFiveSlotPacketsBit				= 1,  /*!< Five slot packets are supported */

	ESupportedEncryptionBit						= 2,  /*!< Encryption is supported */

	ESupportedSlotOffsetBit						= 3,  /*!< Slot offset is supported */

	ESupportedTimingAccuracyBit					= 4,  /*!< Timing accuracy is supported */

	ESupportedSwitchBit							= 5,  /*!< Role switch is supported */

	ESupportedHoldModeBit						= 6,  /*!< Hold mode is supported */

	ESupportedSniffModeBit						= 7,  /*!< Sniff mode is supported */

	ESupportedParkModeBit						= 8,  /*!< Park mode is supported */

	ESupportedRSSIBit							= 9,  /*!< Receive signal strength indication is supported */

	ESupportedChannelQualityDrivenDataRateBit	= 10, /*!< Channel quality driven data rate is supported */

	ESupportedSCOLinkBit						= 11, /*!< SCO links are supported */

	ESupportedHV2PacketsBit						= 12, /*!< HV2 packets are supported */

	ESupportedHV3PacketsBit						= 13, /*!< HV3 packets are supported */

	ESupportedu_lawLogBit						= 14, /*!< SCO u-law encoding is supported */

	ESupportedA_lawLogBit						= 15, /*!< SCO A-law encoding is supported */

	ESupportedCVSDBit							= 16, /*!< SCO Continuously variable slope delta modulation is supported */

	ESupportedPagingSchemeBit					= 17, /*!< Paging scheme is supported */

	ESupportedPowerControlBit					= 18, /*!< Power control is supported */

	ESupportedTransparentSCODataBit				= 19, /*!< Transparent SCO data is supported */

	ESupportedFlowControlLagBit0Bit				= 20, /*!< Flow control lag bit 0 is supported */

	ESupportedFlowControlLagBit1Bit				= 21, /*!< Flow control lag bit 1 is supported */

	ESupportedFlowControlLagBit2Bit				= 22, /*!< Flow control lag bit 2 is supported */

	ESupportedBroadcastEncryptionBit			= 23, /*!< Broadcast encryption is supported */

	EEDR_ACL_2MbpsModeBit						= 25, /*!< 2Mbps EDR ACL supported */

	EEDR_ACL_3MbpsModeBit						= 26, /*!< 3Mbps EDR ACL supported */

	ESupportedEnhancedEnquiryScanBit			= 27, /*!< Enhanced enquiry scan is supported */

	ESupportedInterlacedEnquiryScanBit			= 28, /*!< Interlaced enquiry scan is supported */

	ESupportedInterlacedPageScanBit				= 29, /*!< Interlaced page scan is supported */

	ESupportedRSSIWithInquiryResultsBit			= 30, /*!< Read signal strength indication with inquiry is supported */

	ESupportedExtendedSCOLinkBit				= 31, /*!< Extended SCO links are supported */

	ESupportedEV4PacketsBit						= 32, /*!< EV4 packets are supported */

	ESupportedEV5PacketsBit						= 33, /*!< EV5 packets are supported */

	ESupportedAFHCapableSlaveBit				= 35, /*!< Adaptive frequency hopping in slave role is supported */

	ESupportedAFHClassificationSlaveBit			= 36, /*!< Adaptive frequency hopping classification in slave role is supported */

	ESupportedEDRThreeSlotPacketsBit			= 39, /*!< Three slot EDR packets are supported */

	ESupportedEDRFiveSlotPacketsBit				= 40, /*!< Five slot EDR packets are supported */

	ESupportedSniffSubratingBit					= 41, /*!< Sniff subrating is supported */

	ESupportedEncryptionPauseResumeBit			= 42, /*!< Encryption Pause and Resume is supported */

	ESupportedAFHCapableMasterBit				= 43, /*!< Adaptive frequency hopping in master role is supported */

	ESupportedAFHClassificationMasterBit		= 44, /*!< Adaptive frequency hopping classification in master role is supported */

	EEDR_eSCO_2MbpsModeBit						= 45, /*!< 2Mbps EDR eSCO supported */

	EEDR_eSCO_3MbpsModeBit						= 46, /*!< 3Mbps EDR eSCO supported */

	ESupportedEDReSCOThreeSlotPacketsBit		= 47, /*!< Three slot EDR eSCO packets are supported */

	ESupportedExtendedInquiryResponseBit		= 48, /*!< Extended Inquiry Response */

	ESupportedSecureSimplePairingBit			= 51, /*!< Secure Simple Pairing */

	ESupportedEncapsulatedPDUBit				= 52, /*!< Encapsulated PDU */

	ESupportedErroneousDataReportingBit			= 53, /*!< Erroneous Data Reporting */

	ESupportedNonflushablePacketBoundaryFlagBit	= 54, /*!< Non-flushable Packet Boundary Flag */

	ESupportedLinkSupervisionTimeoutChangedEventBit	= 56, /*!< Link Supervision Timeout Changed Event */

	ESupportedInquiryResponseTXPowerLevelBit	= 57, /*!< Inquiry Response TX Power Level */

	ESupportedExtendedFeaturesBit				= 63, /*!< Additional features are supported */

	};

/**

@internalTechnology

Bit positions of the individual local supported HCI commands.

@see TBluetoothHciCommands

*/

enum TBluetoothSupportedCommandsBits

	{

	ESupportedInquiryCommand								= 0, /*!< Inquiry command is supported */

	ESupportedInquiryCancelCommand							= 1, /*!< Inquiry Cancel command is supported */

	ESupportedPeriodicInquiryModeCommand					= 2, /*!< Periodic Inquiry Mode command is supported */

	ESupportedExitPeriodicInquiryModeCommand				= 3, /*!< Exit Periodic Inquiry Mode command is supported */

	ESupportedCreateConnectionCommand						= 4, /*!< Create Connection command is supported */

	ESupportedDisconnectCommand								= 5, /*!< Disconnect command is supported */

	ESupportedAddSCOConnectionCommand						= 6, /*!< Add SCO Connection command is supported */

	ESupportedCancelCreateConnectionCommand					= 7, /*!< Cancel Create Connection command is supported */

	ESupportedAcceptConnectionRequestCommand				= 8, /*!< Accept Connection Request command is supported */

	ESupportedRejectConnectionRequestCommand				= 9, /*!< Reject Connection Request command is supported */

	ESupportedLinkKeyRequestReplyCommand					= 10, /*!< Link Key Request Reply command is supported */

	ESupportedLinkKeyRequestNegativeReplyCommand			= 11, /*!< Link Key Request Negative Reply command is supported */

	ESupportedPINCodeRequestReplyCommand					= 12, /*!< PIN Code Request Reply command is supported */

	ESupportedPINCodeRequestNegativeReplyCommand			= 13, /*!< PIN Code Request Negative Reply command is supported */

	ESupportedChangeConnectionPacketTypeCommand				= 14, /*!< Change Connection Packet Type command is supported */

	ESupportedAuthenticationRequestCommand					= 15, /*!< Authentication Request command is supported */

	ESupportedSetConnectionEncryptionCommand				= 16, /*!< Set Connection Encryption command is supported */

	ESupportedChangeConnectionLinkKeyCommand				= 17, /*!< Change Connection Link Key command is supported */

	ESupportedMasterLinkKeyCommand							= 18, /*!< Master Link Key command is supported */

	ESupportedRemoteNameRequestCommand						= 19, /*!< Remote Name Request command is supported */

	ESupportedCancelRemoteNameRequestCommand				= 20, /*!< Cancel Remote Name Request command is supported */

	ESupportedReadRemoteSupportedFeaturesCommand			= 21, /*!< Read Remote Supported Features command is supported */

	ESupportedReadRemoteExtendedFeaturesCommand				= 22, /*!< Read Remote Extended Features command is supported */

	ESupportedReadRemoteVersionInformationCommand			= 23, /*!< Read Remote Version Information command is supported */

	ESupportedReadClockOffsetCommand						= 24, /*!< Read Clock Offset command is supported */

	ESupportedReadLMPHandleCommand							= 25, /*!< Read LMP Handle command is supported */

	ESupportedHoldModeCommand								= 33, /*!< Hold Mode command is supported */

	ESupportedSniffModeCommand								= 34, /*!< Sniff Mode command is supported */

	ESupportedExitSniffModeCommand							= 35, /*!< Exit Sniff Mode command is supported */

	ESupportedParkStateCommand								= 36, /*!< Park State command is supported */

	ESupportedExitParkStateCommand							= 37, /*!< Exit Park State command is supported */

	ESupportedQoSSetupCommand								= 38, /*!< QoS Setup command is supported */

	ESupportedRoleDiscoveryCommand							= 39, /*!< Role Discovery command is supported */

	ESupportedSwitchRoleCommand								= 40, /*!< Switch Role command is supported */

	ESupportedReadLinkPolicySettingsCommand					= 41, /*!< Read Link Policy Settings command is supported */

	ESupportedWriteLinkPolicySettingsCommand				= 42, /*!< Write Link Policy Settings command is supported */

	ESupportedReadDefaultLinkPolicySettingsCommand			= 43, /*!< Read Default Link Policy Settings command is supported */

	ESupportedWriteDefaultLinkPolicySettingsCommand			= 44, /*!< Write Default Link Policy Settings command is supported */

	ESupportedFlowSpecificationCommand						= 45, /*!< Flow Specification command is supported */

	ESupportedSetEventMarkCommand							= 46, /*!< Set Event Mark command is supported */

	ESupportedResetCommand									= 47, /*!< Reset command is supported */

	ESupportedSetEventFilterCommand							= 48, /*!< Set Event Filter command is supported */

	ESupportedFlushCommand									= 49, /*!< Flush command is supported */

	ESupportedReadPINTypeCommand							= 50, /*!< Read PIN Type command is supported */

	ESupportedWritePINTypeCommand							= 51, /*!< Write PIN Type command is supported */

	ESupportedCreateNewUnitKeyCommand						= 52, /*!< Create New Unit Key command is supported */

	ESupportedReadStoredLinkKeyCommand						= 53, /*!< Read Stored Link Key command is supported */

	ESupportedWriteStoredLinkKeyCommand						= 54, /*!< Write Stored Link Key command is supported */

	ESupportedDeleteStoredLinkKeyCommand					= 55, /*!< Delete Stored Link Key command is supported */

	ESupportedWriteLocalNameCommand							= 56, /*!< Write Local Name command is supported */

	ESupportedReadLocalNameCommand							= 57, /*!< Read Local Name command is supported */

	ESupportedReadConnectionAcceptTimeoutCommand			= 58, /*!< Read Connection Accept Timeout command is supported */

	ESupportedWriteConnectionAcceptTimeoutCommand			= 59, /*!< Write Connection Accept Timeout command is supported */

	ESupportedReadPageTimeoutCommand						= 60, /*!< Read Page Timeout command is supported */

	ESupportedWritePageTimeoutCommand						= 61, /*!< Write Page Timeout command is supported */

	ESupportedReadScanEnableCommand							= 62, /*!< Read Scan Enable command is supported */

	ESupportedWriteScanEnableCommand						= 63, /*!< Write Scan Enable command is supported */

	ESupportedReadPageScanActivityCommand					= 64, /*!< Read Page Scan Activity command is supported */

	ESupportedWritePageScanActivityCommand					= 65, /*!< Write Page Scan Activity command is supported */

	ESupportedReadInquiryScanActivityCommand				= 66, /*!< Read Inquiry Scan Activity command is supported */

	ESupportedWriteInquiryScanActivityCommand				= 67, /*!< Write Inquiry Scan Activity command is supported */

	ESupportedReadClassOfDeviceCommand						= 72, /*!< Read Class Of Device command is supported */

	ESupportedWriteClassOfDeviceCommand						= 73, /*!< Write Class Of Device command is supported */

	ESupportedReadVoiceSettingCommand						= 74, /*!< Read Voice Setting command is supported */

	ESupportedWriteVoiceSettingCommand						= 75, /*!< Write Voice Setting command is supported */

	ESupportedReadAutomaticFlushTimeoutCommand				= 76, /*!< Read Automatic Flush Timeout command is supported */

	ESupportedWriteAutomaticFlushTimeoutCommand				= 77, /*!< Write Automatic Flush Timeout command is supported */

	ESupportedReadNumBroadcastRetransmissionsCommand		= 78, /*!< Read Num Broadcast Retransmissions command is supported */

	ESupportedWriteNumBroadcastRetransmissionsCommand		= 79, /*!< Write Num Broadcast Retransmissions command is supported */

	ESupportedReadHoldModeActivityCommand					= 80, /*!< Read Hold Mode Activity command is supported */

	ESupportedWriteHoldModeActivityCommand					= 81, /*!< Write Hold Mode Activity command is supported */

	ESupportedReadTransmitPowerLevelCommand					= 82, /*!< Read Transmit Power Level command is supported */

	ESupportedReadSynchronousFlowControlEnableCommand		= 83, /*!< Read Synchronous Flow Control Enable command is supported */

	ESupportedWriteSynchronousFlowControlEnableCommand		= 84, /*!< Write Synchronous Flow Control Enable command is supported */

	ESupportedSetHostControllerToHostFlowControlCommand		= 85, /*!< Set Host Controller To Host Flow Control command is supported */

	ESupportedHostBufferSizeCommand							= 86, /*!< Host Buffer Size command is supported */

	ESupportedHostNumberOfCompletedPacketsCommand			= 87, /*!< Host Number Of Completed Packets command is supported */

	ESupportedReadLinkSupervisionTimeoutCommand				= 88, /*!< Read Link Supervision Timeout command is supported */

	ESupportedWriteLinkSupervisionTimeoutCommand			= 89, /*!< Write Link Supervision Timeout command is supported */

	ESupportedReadNumberofSupportedIACCommand				= 90, /*!< Read Number of Supported IAC command is supported */

	ESupportedReadCurrentIACLAPCommand						= 91, /*!< Read Current IAC LAP command is supported */

	ESupportedWriteCurrentIACLAPCommand						= 92, /*!< Write Current IAC LAP command is supported */

	ESupportedReadPageScanModeCommand						= 95, /*!< Read Page Scan Mode command is supported */

	ESupportedWritePageScanModeCommand						= 96, /*!< Write Page Scan Mode command is supported */

	ESupportedSetAFHChannelClassificationCommand			= 97, /*!< Set AFH Channel Classification command is supported */

	ESupportedReadInquiryScanTypeCommand					= 100, /*!< Read Inquiry Scan Type command is supported */

	ESupportedWriteInquiryScanTypeCommand					= 101, /*!< Write Inquiry Scan Type command is supported */

	ESupportedReadInquiryModeCommand						= 102, /*!< Read Inquiry Mode command is supported */

	ESupportedWriteInquiryModeCommand						= 103, /*!< Write Inquiry Mode command is supported */

	ESupportedReadPageScanTypeCommand						= 104, /*!< Read Page Scan Type command is supported */

	ESupportedWritePageScanTypeCommand						= 105, /*!< Write Page Scan Type command is supported */

	ESupportedReadAFHChannelAssessmentModeCommand			= 106, /*!< Read AFH Channel Assessment Mode command is supported */

	ESupportedWriteAFHChannelAssessmentModeCommand			= 107, /*!< Write AFH Channel Assessment Mode command is supported */

	ESupportedReadLocalVersionInformationCommand			= 115, /*!< Read Local Version Information command is supported */

	ESupportedReadLocalSupportedFeaturesCommand				= 117, /*!< Read Local Supported Features command is supported */

	ESupportedReadLocalExtendedFeaturesCommand				= 118, /*!< Read Local Extended Features command is supported */

	ESupportedReadBufferSizeCommand							= 119, /*!< Read Buffer Size command is supported */

	ESupportedReadCountryCodeCommand						= 120, /*!< Read Country Code [Deprecated] command is supported */

	ESupportedReadBDADDRCommand								= 121, /*!< Read BD ADDR command is supported */

	ESupportedReadFailedContactCountCommand					= 122, /*!< Read Failed Contact Count command is supported */

	ESupportedResetFailedContactCountCommand				= 123, /*!< Reset Failed Contact Count command is supported */

	ESupportedGetLinkQualityCommand							= 124, /*!< Get Link Quality command is supported */

	ESupportedReadRSSICommand								= 125, /*!< Read RSSI command is supported */

	ESupportedReadAFHChannelMapCommand						= 126, /*!< Read AFH Channel Map command is supported */

	ESupportedReadBDClockCommand							= 127, /*!< Read BD Clock command is supported */

	ESupportedReadLoopbackModeCommand						= 128, /*!< Read Loopback Mode command is supported */

	ESupportedWriteLoopbackModeCommand						= 129, /*!< Write Loopback Mode command is supported */

	ESupportedEnableDeviceUnderTestModeCommand				= 130, /*!< Enable Device Under Test Mode command is supported */

	ESupportedSetupSynchronousConnectionCommand				= 131, /*!< Setup Synchronous Connection command is supported */

	ESupportedAcceptSynchronousConnectionCommand			= 132, /*!< Accept Synchronous Connection command is supported */

	ESupportedRejectSynchronousConnectionCommand			= 133, /*!< Reject Synchronous Connection command is supported */

	ESupportedReadExtendedInquiryResponseCommand			= 136, /*!< Read Extended Inquiry Response command is supported */

	ESupportedWriteExtendedInquiryResponseCommand			= 137, /*!< Write Extended Inquiry Response command is supported */

	ESupportedRefreshEncryptionKeyCommand					= 138, /*!< Refresh Encryption Key command is supported */

	ESupportedSniffSubratingCommand							= 140, /*!< Sniff Subrating command is supported */

	ESupportedReadSimplePairingModeCommand					= 141, /*!< Read Simple Pairing Mode command is supported */

	ESupportedWriteSimplePairingModeCommand					= 142, /*!< Write Simple Pairing Mode command is supported */

	ESupportedReadLocalOOBDataCommand						= 143, /*!< Read Local OOB Data command is supported */

	ESupportedReadInquiryResponseTransmitPowerCommand		= 144, /*!< Read Inquiry Response Transmit Power command is supported */

	ESupportedWriteInquiryTransmitPowerLevelCommand			= 145, /*!< Write Inquiry Transmit Power Level command is supported */

	ESupportedReadDefaultErroneousDataReportingCommand		= 146, /*!< Read Default Erroneous Data Reporting command is supported */

	ESupportedWriteDefaultErroneousDataReportingCommand		= 147, /*!< Write Default Erroneous Data Reporting command is supported */

	ESupportedIOCapabilityRequestReplyCommand				= 151, /*!< IO Capability Request Reply command is supported */

	ESupportedUserConfirmationRequestReplyCommand			= 152, /*!< User Confirmation Request Reply command is supported */

	ESupportedUserConfirmationRequestNegativeReplyCommand	= 153, /*!< User Confirmation Request Negative Reply command is supported */

	ESupportedUserPasskeyRequestReplyCommand				= 154, /*!< User Passkey Request Reply command is supported */

	ESupportedUserPasskeyRequestNegativeReplyCommand		= 155, /*!< User Passkey Request Negative Reply command is supported */

	ESupportedRemoteOOBDataRequestReplyCommand				= 156, /*!< Remote OOB Data Request Reply command is supported */

	ESupportedWriteSimplePairingDebugModeCommand			= 157, /*!< Write Simple Pairing Debug Mode command is supported */

	ESupportedEnhancedFlushCommand							= 158, /*!< Enhanced Flush command is supported */

	ESupportedRemoteOOBDataRequestNegativeReplyCommand		= 159, /*!< Remote OOB Data Request Negative Reply command is supported */

	ESupportedSendKeypressNotificationCommand				= 162, /*!< Send Keypress Notification command is supported */

	ESupportedIOCapabilitiesResponseNegativeReplyCommand	= 163, /*!< IO Capabilities Response Negative Reply command is supported */

	};

/**

@publishedAll

@released

Bluetooth SIG specified values indicating whether a device

is physically able to support a baseband (or link manager protocol) feature

*/

enum TBTSupportedFeatures

	{

	ESupportedThreeSlotPackets				= 1<<0,  /*!< Three slot packets are supported */

	ESupportedFiveSlotPackets				= 1<<1,  /*!< Five slot packets are supported */

	ESupportedEncryption					= 1<<2,  /*!< Encryption is supported */

	ESupportedSlotOffset					= 1<<3,  /*!< Slot offset is supported */

	ESupportedTimingAccuracy				= 1<<4,  /*!< Timing accuracy is supported */

	ESupportedSwitch						= 1<<5,  /*!< Role switch is supported */

	ESupportedHoldMode						= 1<<6,  /*!< Hold mode is supported */

	ESupportedSniffMode						= 1<<7,  /*!< Sniff mode is supported */

	ESupportedParkMode						= 1<<8,  /*!< Park mode is supported */

	ESupportedRSSI							= 1<<9,  /*!< Receive signal strength indication is supported */

	ESupportedChannelQualityDrivenDataRate	= 1<<10, /*!< Channel quality driven data rate is supported */

	ESupportedSCOLink						= 1<<11, /*!< SCO links are supported */

	ESupportedHV2Packets					= 1<<12, /*!< HV2 packets are supported */

	ESupportedHV3Packets					= 1<<13, /*!< HV3 packets are supported */

	ESupportedu_lawLog						= 1<<14, /*!< SCO u-law encoding is supported */

	ESupportedA_lawLog						= 1<<15, /*!< SCO A-law encoding is supported */

	ESupportedCVSD							= 1<<16, /*!< SCO Continuously variable slope delta modulation is supported */

	ESupportedPagingScheme					= 1<<17, /*!< Paging scheme is supported */

	ESupportedPowerControl					= 1<<18, /*!< Power control is supported */

	ESupportedTransparentSCOData			= 1<<19, /*!< Transparent SCO data is supported */

	ESupportedFlowControlLagBit0			= 1<<20, /*!< Flow control lag bit 0 is supported */

	ESupportedFlowControlLagBit1			= 1<<21, /*!< Flow control lag bit 1 is supported */

	ESupportedFlowControlLagBit2			= 1<<22, /*!< Flow control lag bit 2 is supported */

	};

/**

@publishedAll

@released