// Copyright (c) 1998-2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of the License "Symbian Foundation License v1.0" to Symbian Foundation members and "Symbian Foundation End User License Agreement v1.0" to non-members

// which accompanies this distribution, and is available

// at the URL "http://www.symbianfoundation.org/legal/licencesv10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

// Description:

// template\template_variant\inc\iolines.h

// Variant layer header for Template Platform

// 

//

#ifndef __V32TEMPLATEV1_H__

#define __V32TEMPLATEV1_H__

#include <e32cmn.h>

#include <kpower.h>

//----------------------------------------------------------------------------

// Variant-specific constants: use #define if constant dependencies are not

// declared within this file (this breaks the dependency on other header files)

//----------------------------------------------------------------------------

// Examples of what goes in here include:

//

// - General-purpose I/O allocation such as 

//	 #define KtVariantGpio32KHzClkOut		KHtGpioPort1

//	 #define KtVariantGpioRClkOut			KHtGpioPort0

//

//	 #define KmVariantPinDirectionIn Sleep	0

//

// - Memory constants (type, geometry, wait states, etc) such as:

//	 #define KwVariantRom0Type				TTemplate::ERomTypeBurst4Rom

//	 #define KwVariantRom0Width				TTemplate::ERomWidth32

//	 const TUint KwVariantRom0WaitNs		= 150;

//	 const TUint KwVariantRom0PageNs		= 30;

//	 const TUint KwVariantRom0RecoverNs		= 55;

//

// - Specific Peripherals (Keyboard, LCD, CODECS, Serial Ports) such as 

//	 const TUint KwVariantKeyColLshift		= 7;

//	 #define KwVariantLcdBpp				TTemplate::ELcd8BitsPerPixel

//   const TUint KwVariantLcdMaxColors		= 4096;

//   const TUint KwVariantCodecMaxVolume	= 0;

//

// - Off-chip hardware control blocks (addresses, register make-up)

//

// - Interrupts (second-level Interrupt controller base address, register make-up):

//   (EXAMPLE ONLY:)

const TUint32 KHwVariantPhysBase		=	0x40000000;

const TUint32 KHoVariantRegSpacing		=	0x200;

const TUint32 KHoBaseIntCont			=	0x0B*KHoVariantRegSpacing;

const TUint32 KHoIntContEnable			=	0x00;		// offsets from KHwVariantPhysBase+KHoBaseIntCont

const TUint32 KHoIntContPending			=	0x04;

// other Variant and external blocks Base adrress offsets to KHwVariantPhysBase

// TO DO: (optional)

//

// Enumerate here all Variant (2nd level)  interrupt sources. It could be a good idea to enumerate them in a way that 

// facilitates operating on the corresponding interrupt controller registers (e.g using their value as a shift count)

//

//   (EXAMPLE ONLY:)

enum TTemplateInterruptId

	{

	// the top-level bit is set to distinguish from first level (ASSP) Interrupts

	EXIntIdA=0x80000000,

	EXIntIdB=0x80000001,

	// ...

	EXIntIdZ=0x80000019,

	ENumXInts=0x1A

	};

//

// TO DO: (optional)

//

// Define here some commonly used Variant (2nd level) interrupts

//

//   (EXAMPLE ONLY:)

const TInt KIntIdKeyboard=EXIntIdB;

class Variant

    {

	// below is a selection of functions usually implemented  at this level. This do not constitute a mandatory

	// set and it might not be relevant for your hardware...

public:

	/**

	 * initialisation

	 */

	static void Init3();

	/**

	 * Returns the Linear Base address of the Variant Hardware

	 */

	IMPORT_C static TUint BaseLinAddress();

	/**

	 * When invoked, turns off all power supplies

	 */

	IMPORT_C static void PowerReset();

	/**

	 * When invoked, it marks the Serial port used for outputting debug strings as requiring re-initialisation

	 * As in, for example, the serial port was used by a device driver or the system is coming back from Standby

	 */

	IMPORT_C static void MarkDebugPortOff();

	/**

	 * When invoked, initialises the Serial Port hardware for the serial port used to output Debug strings

	 * Called by Template::DebugInit()

	 */

	IMPORT_C static void UartInit();

	/**

	 * When invoked, read the state of on-board switches

	 * @return A bitmask with the state of on-board switches

	 */

	IMPORT_C static TUint Switches();

	// other functions to access hardware not covered by specific device-drivres, which may be called from drivers

	// or platform-specifc code

	// ...

public:

	static TUint32 iBaseAddress;

	// (optional): May need to have a follower variable to store the value of a read only register initialised at boot time

	// static TUint aFollower;

    };

#endif