// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// lukasz.forynski@gmail.com

//

// Contributors:

//

// Description:

// omap3530/beagle_drivers/byd_touch/common/controller.h

//

#ifndef TOUCH_KEY_CONTROLLER_H_

#define TOUCH_KEY_CONTROLLER_H_

#include <drivers/iic.h>

#include <e32def.h>

// controller specific constants..

const TUint KMaxNumPoints = 3;

typedef void (*TVoidCallback) (TAny*);

// spi specific constants..

const TUint KWrite     = 0;

const TUint KRead      = 1;

const TUint KReadCommand  = KStartByte | KRead;

const TUint KWriteCommand = KStartByte;

const TUint KBufGranulatity = 8;

// digitizer specific settings..

const TUint KResetPin = 93; // This setting does not change (it goes through J4/J5 connectors)

const TUint KDataReadyPin = 133; // DAV connected to the GPIO133 (Expansion header pin 15)

const TUint KSpiModule = 2; // McSPI3

const TUint KSpiSlaveAddr0 = 2; // for data18-data23 pin functions slave address 2=>CS0..

const TUint KSpiSlaveAddr1 = 3; // ..slave address 3=>CS1 (pref!)

const TUint KSpiSlaveAddr = KSpiSlaveAddr1;

const TConfigSpiV01 KHeader =

	{

	ESpiWordWidth_8, //iWordWidth

	375000,//,93750, //iClkSpeed

	ESpiPolarityHighFallingEdge, //iClkMode

	500, // iTimeoutPeriod

	EBigEndian, // iEndianness

	EMsbFirst, //iBitOrder

	2, //iTransactionWaitCycles

	ESpiCSPinActiveLow //iCsPinActiveMode

	};

// spi interface to the controller

class TTouchControllerInterface

	{

public:

	inline TTouchControllerInterface();

	inline TInt Read(TUint8 aRegAddress, TUint8& aValue);

	inline TInt Write(TUint8 aRegAddress, TUint8 aValue);

private:

	// SPI duplex transaction with two transfers for each direction

	TPckgBuf<TConfigSpiV01> iSpiTransactionHeader;

	TIicBusTransfer         iSpiTxTransfer;

	TIicBusTransfer         iSpiRxTransfer;

	TIicBusTransaction      iSpiTransaction;

	TInt                    iSpiBusId;

	};

class TouchController

	{

public:

	enum TTouchMode

		{

		};

	enum TResolution

		{

		ERes10Bits = 0,

		ERes12Bits

		};

	enum TGestureType

		{

		EClockwiseCircumvolve = 3,

		EDragLeft             = 4,

		EDragRight            = 5,

		EDragUp               = 6,

		EDragDown             = 7,

		EZoomOut              = 8,

		EZoomIn               = 9

		};

	TouchController();

	TouchController(TVoidCallback aCallback);

	TInt HardReset();

	TInt SoftReset();

	TInt SetTouchMode(TTouchMode aMode);

	TInt SetResolution(TResolution aResolution);

	TInt SetLongerSamplingRate(TUint aRate);

	TInt SetIrqActiveTime(TUint aIrqActiveTime);

	TInt SetPanelVoltageStabTime(TUint aVoltageStabilizationTime);

	TInt SetNumberOfColumns(TUint aNumberOfColumns);

	TInt SetNumberOfRows(TUint aNumberOfRows);

	TInt EnableWindowMode(TPoint aXpoint, TPoint aYPoint);

	TInt DisableWindowMode();

	TInt GetMeasurements(TPoint* aPoints, TInt& aNumPoints);

	TInt NumOfTouches();

private:

	TInt iCtrlRegsCache[4];

	TTouchControllerInterface iInterface;

	TVoidCallback iCallback;

	};

// BF6917 Register definitions

const TUint8 KControl_0  = 0x0; // R/W

const TUint8 KControl_0_SWRST        = 1 << 7;  // SW reset

const TUint8 KControl_0_RM_12        = 1 << 6; // Resolution mode 12 bits if set, 10bits otherwise

const TUint8 KControl_0_MODE_SINGLE  = 1 << 3; // single touch mode

const TUint8 KControl_0_MODE_MULTI   = 5 << 3; // multi-touch mode

const TUint8 KControl_0_MODE_GESTURE = 6 << 3; // gesture mode

const TUint8 KControl_0_MODE_MASK    = 7 << 3; // gesture mode

const TUint8 KControl_0_LST_MASK     = 0x7; // Longer sampling rate: from 5 to 120 ADC clocks sampling time

const TUint8 KControl_0_LST_5        = 0 << 0; // 5   ADC clocks sampling time

const TUint8 KControl_0_LST_10       = 1 << 0; // 10  ADC clocks sampling time

const TUint8 KControl_0_LST_20       = 2 << 0; // 20  ADC clocks sampling time

const TUint8 KControl_0_LST_40       = 3 << 0; // 40  ADC clocks sampling time

const TUint8 KControl_0_LST_60       = 4 << 0; // 60  ADC clocks sampling time

const TUint8 KControl_0_LST_80       = 5 << 0; // 80  ADC clocks sampling time

const TUint8 KControl_0_LST_100      = 6 << 0; // 100 ADC clocks sampling time

const TUint8 KControl_0_LST_120      = 7 << 0; // 120 ADC clocks sampling time

// Pen Irq Active time (sensiveness)

const TUint8 KControl_1  = 0x1; // R/W

const TUint8 KControl_1_PAT_SHIFT = 5;

const TUint8 KControl_1_PAT_MASK  = 7 << 5;

const TUint8 KControl_1_PAT_100   = 0 << 5;

const TUint8 KControl_1_PAT_87_5  = 1 << 5;

const TUint8 KControl_1_PAT_75    = 2 << 5;

const TUint8 KControl_1_PAT_62_5  = 3 << 5;

const TUint8 KControl_1_PAT_50    = 4 << 5;

const TUint8 KControl_1_PAT_37_5  = 5 << 5;

const TUint8 KControl_1_PAT_25    = 6 << 5;

const TUint8 KControl_1_PAT_12_5  = 7 << 5;

//  Panel Voltage stabilization Time(sensiveness)

const TUint8 KControl_1_PVT_SHIFT = 2;

const TUint8 KControl_1_PVT_MASK = 7 << 2;

const TUint8 KControl_1_PVT_200  = 0 << 2;

const TUint8 KControl_1_PVT_175  = 1 << 2;

const TUint8 KControl_1_PVT_150  = 2 << 2;

const TUint8 KControl_1_PVT_125  = 3 << 2;

const TUint8 KControl_1_PVT_100  = 4 << 2;

const TUint8 KControl_1_PVT_75   = 5 << 2;

const TUint8 KControl_1_PVT_50   = 6 << 2;

const TUint8 KControl_1_PVT_25   = 7 << 2;

const TUint8 KControl_1_WS       = 1 << 0; // Window mode enables

const TUint8 KControl_2  = 0x2; // R/W

const TUint8 KControl_2_C_SHIFT  = 3; // number of columns

const TUint8 KControl_2_C_MASK = 0xf8;

const TUint8 KControl_2_PR_SHIFT = 0; // pull-up resistance

const TUint8 KControl_3  = 0x3; // R/W

const TUint8 KControl_3_R_SHIFT  = 4; // number of rows

const TUint8 KControl_3_R_MASK   = 0xF0; // number of rows

const TUint8 KControl_2_R_TEST   = 1 << 3; // test mode select

const TUint8 KControl_2_PS_SHIFT = 0; // processing scale (0-7)

const TUint8 KWindowXStart_Msb = 0x4; // R/W

const TUint8 KWindowXStart_Lsb = 0x5; // R/W

const TUint8 KWindowXStop_Msb  = 0x6; // R/W

const TUint8 KWindowXStop_Lsb  = 0x7; // R/W

const TUint8 KWindowYStart_Msb = 0x8; // R/W

const TUint8 KWindowYStart_Lsb = 0x9; // R/W

const TUint8 KWindowYStop_Msb  = 0xa; // R/W

const TUint8 KWindowYStop_Lsb  = 0xb; // R/W

const TUint8 KMasterReadStartAddr = 0xc; // R/W

//  data registers

const TUint8 KTouchNumberAndType  = 0xd; //  R, Touch number and touch type

const TUint8 KTouchNumberAndType_SINGLE = 0 << 3;

const TUint8 KTouchNumberAndType_MULTI  = 1 << 3;

const TUint8 KTouchNumberAndType_TouchNMask = 7; // touch number (0 - 3)

const TUint8 X1_H   = 0xe; //  R, High byte of x1 measurement

const TUint8 X1_L   = 0xf; //  R, Low  byte of x1 measurement

const TUint8 Y1_H   = 0x10; // R, High byte of y1 measurement

const TUint8 Y1_L   = 0x11; // R, Low  byte of y1 measurement

const TUint8 X2_H   = 0x12; // R, High byte of x2 measurement

const TUint8 X2_L   = 0x13; // R, Low  byte of x2 measurement

const TUint8 Y2_H   = 0x14; // R, High byte of y2 measurement

const TUint8 Y2_L   = 0x15; // R, Low  byte of y2 measurement

const TUint8 X3_H   = 0x16; // R, High byte of x3 measurement

const TUint8 X3_L   = 0x17; // R, Low  byte of x3 measurement

const TUint8 Y3_H   = 0x18; // R, High byte of y3 measurement

const TUint8 Y3_L   = 0x19; // R, Low  byte of y3 measurement

const TUint8 Ges_H  = 0x1a; // R, High byte of gesture information

const TUint8 Ges_L  = 0x1b; // R, Low  byte of gesture information

const TUint8 TEST_H = 0x1c; // R, Low byte of the test result

const TUint8 TEST_L = 0x1d; // R, Low byte of the test result

#endif /* TOUCH_KEY_CONTROLLER_H_ */