// This component and the accompanying materials are made available

// under the terms of the License "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// lukasz.forynski@gmail.com

//

// Contributors:

//

// Description:

// omap3530/omap3530_drivers/spi/omap3530_spi.inl

//

// This file contains definitions to internal SPI implementation.

// It is not intended to be exported - SPI registers must not be modified from outside of

// the driver!

//

// This sets the CS line to inactive mode (Specify aActiveMode as appropriate for configuration)

// The CS pin will be put back to the opposite mode - using GPIO..

inline void SetCsInactive(TInt aModule, TInt aChannel, TSpiSsPinMode aActiveMode)

	{

	//__ASSERT_DEBUG(aModule < KMaxSpiChannelsPerModule, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels

	// set the pin to the opposite to the currently active CS mode..

	TUint16 csPinOptions = aActiveMode == ESpiCSPinActiveLow ? KCsPinModeUp : KCsPinModeDown;

	const TPinConfig& csConf = ModulePinConfig[aModule].iCs[aChannel];

	__ASSERT_DEBUG(csConf.iAddress, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels

	// now switch the pin mode..

	SCM::SetPadConfig(csConf.iAddress, csConf.iMswLsw, SCM::EMode4 | csPinOptions); // always go to mode 4 (gpio)

	}

void SetCsActive(TInt aModule, TInt aChannel, TSpiSsPinMode aActiveMode)

	{

	//__ASSERT_DEBUG(aModule < KMaxSpiChannelsPerModule, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels

	TUint16 csPinOptions = aActiveMode == ESpiCSPinActiveLow ? KCsPinModeUp : KCsPinModeDown;

	const TPinConfig &csConf = ModulePinConfig[aModule].iCs[aChannel];

	__ASSERT_DEBUG(csConf.iAddress, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels

	// now switch the pin mode back to the SPI

	SCM::SetPadConfig(csConf.iAddress, csConf.iMswLsw, csConf.iFlags | csPinOptions); // revert to intended mode

	}

// Setup pad function for SPI pins..

void SetupSpiPins(TUint aSpiModule)

	{

	//__ASSERT_DEBUG(aModule < KMaxSpiChannelsPerModule, Kern::Fault("omap3530_spi.inl, line: ", __LINE__)); // aChannel > module channels

	const TSpiPinConfig& pinCnf = ModulePinConfig[aSpiModule];

	SCM::SetPadConfig(pinCnf.iClk.iAddress, pinCnf.iClk.iMswLsw, pinCnf.iClk.iFlags);

	SCM::SetPadConfig(pinCnf.iSimo.iAddress, pinCnf.iSimo.iMswLsw, pinCnf.iSimo.iFlags);

	SCM::SetPadConfig(pinCnf.iSomi.iAddress, pinCnf.iSomi.iMswLsw, pinCnf.iSomi.iFlags);

	// Cs pins are set dynamically during operations.

	}

// helper function - returns appropriate value for the register for a given mode

inline TUint32 SpiClkMode(TSpiClkMode aClkMode)

	{

	// (POL) (PHA)

	//	0     0     Mode 0: spim_clk is active high and sampling occurs on the rising edge.

	//	0     1     Mode 1: spim_clk is active high and sampling occurs on the falling edge.

	//	1     0     Mode 2: spim_clk is active low and sampling occurs on the falling edge.

	//	1     1     Mode 3: spim_clk is active low and sampling occurs on the rising edge.

	TUint val = 0;

	switch(aClkMode)

		{

		//case ESpiPolarityLowRisingEdge:	// Active high, odd edges

			/*val |= MCSPI_CHxCONF_POL;*/ // 0 (not set)

			/*val |= MCSPI_CHxCONF_PHA;*/ // 0 (not set)

			//break; // commented out - it's only for  reference - there's nothing to change

		case ESpiPolarityLowFallingEdge: // Active high, even edges

			/*val |= MCSPI_CHxCONF_POL;*/ // 0 (not set)

			val |= MCSPI_CHxCONF_PHA;     // 1

			break;

		case ESpiPolarityHighFallingEdge: // Active low,  odd edges

			val |= MCSPI_CHxCONF_POL;     // 1

			/*val |= MCSPI_CHxCONF_PHA;*/ // 0 (not set)

			break;

		case ESpiPolarityHighRisingEdge: // Active low,  even edges

			val |= MCSPI_CHxCONF_POL; // 1

			val |= MCSPI_CHxCONF_PHA; // 1

			break;

		}

	return val;

	}

// helper function - returns appropriate value for the register for a given frequency (or error->if not found)

inline TInt SpiClkValue(TInt aClkSpeedHz)

	{

	for (TInt val = 0; val < 0xD; val++) // only loop through all possible values..

		{

		if(MCSPI_K48MHz >> val == aClkSpeedHz)

			{

			return (val << 2); // return value ready for the register

			}

		}

	return KErrNotFound;

	}

inline TInt SpiWordWidth(TSpiWordWidth aWidth)

	{

	TInt val = 0;

	switch(aWidth)

		{

		case ESpiWordWidth_8:  val |= MCSPI_CHxCONF_WL(8); break;

		case ESpiWordWidth_10: val |= MCSPI_CHxCONF_WL(10); break;

		case ESpiWordWidth_12: val |= MCSPI_CHxCONF_WL(12); break;

		case ESpiWordWidth_16: val |= MCSPI_CHxCONF_WL(16); break;

//		case ESpiWordWidth_32: val |= MCSPI_CHxCONF_WL(32); break; // TODO uncomment when fix for Bug 3665 is released

		}

	return val;

	}