Initial contribution supporting NaviEngine 1
This package_definition.xml will build support for three memory models
- Single (sne1_tb)
- Multiple (ne1_tb)
- Flexible (fne1_tb)
/*
* Copyright (c) 2008-2010 Nokia Corporation and/or its subsidiary(-ies).
* All rights reserved.
* This component and the accompanying materials are made available
* under the terms of "Eclipse Public License v1.0"
* which accompanies this distribution, and is available
* at the URL "http://www.eclipse.org/legal/epl-v10.html".
*
* Initial Contributors:
* Nokia Corporation - initial contribution.
*
* Contributors:
*
* Description:
* ne1_tb\rom\kernel.iby
* TO DO: (mandatory)
* This file includes all the kernel files for your base port
* Important: 'extension' libraries are started at boot time in the order specified
* in this file, ensure dependencies are considered.
*
*/
#if defined(PAGED_ROM) || defined(PAGED_CODE)
#if !defined(_NAND2) && !defined(_NANDTEST2) && !defined(MMC_PAGED_ROM)
#error Demand paging on h4hrp requires nand2 or mmc support
#endif
#endif
// Rom paging config
#ifdef PAGED_ROM
pagedrom
compress
#endif
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_KANAVIENGINE.DLL \sys\bin\kanaviengine.dll
primary[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##MEMMODEL_VARIANT##_EKERN.EXE \sys\bin\ekern.exe
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_BTRACEX.LDD \sys\bin\btracex.ldd
variant[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_ECUST.DLL \sys\bin\ecust.dll
#ifndef WITH_DIRECT_MM
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_HCR.DLL \sys\bin\hcr.dll
#else
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_WATCHDOG.DLL \sys\bin\watchdog.dll
#endif
//extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_SERIALNO.DLL \sys\bin\serialno.dll
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##MEMMODEL_VARIANT##_EXMONCOMMON.DLL \sys\bin\exmoncommon.dll
#ifdef CRASH_LOG_NAND2
extension[VARID]= \epoc32\release\##KMAIN##\##BUILD##\_##VARIANT##_exmonlognand.dll \sys\bin\exmonlog.dll
#endif
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EXMONDEBUG.DLL \sys\bin\exmondebug.dll
#ifndef WITH_DIRECT_MM
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_POWER.DLL \sys\bin\power.dll
#ifdef SYMBIAN_USE_DMA_V2
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_DMA_V2.DLL \sys\bin\DMA.DLL
#else
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_DMA.DLL \sys\bin\DMA.DLL
#endif
#endif
// In the initial phases of development, when neither display and keyboard drivers are available
// you may want to use the VT100 Sreen Driver (which also keyboard input and keyboard translation).
// In that case just include the following line:
#ifdef NAVIENGINE_USE_VT100
#define EDISP_DRV \EDISP_VT100.DLL
#else
#undef EDISP_DRV
#endif
#if !defined(EDISP_DRV)
extension[MAGIC]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_lcdgce.PDD \sys\bin\DISPLAY0.PDD
#if defined(SYMBIAN_BASE_USE_GCE) || defined(SYMBIAN_GRAPHICS_USE_GCE)
device[MAGIC]=\Epoc32\Release\##KMAIN##\##BUILD##\display.ldd \sys\bin\DISPLAY0.LDD
#endif
#ifdef UBOOTLDR_ROM
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_UBOOTLDRKEYB.DLL \sys\bin\ekeyb.dll
#else
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_VSERIALKEYB.DLL \sys\bin\ekeyb.dll
#endif
#endif
//extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EKEYB.DLL \sys\bin\ekeyb.dll
file[VARID]= \Epoc32\Release\##MAIN##\##BUILD##\_##VARIANT##_EKDATA.DLL \sys\bin\ekdata.dll
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EUART.PDD \sys\bin\euart.pdd
#ifndef WITH_DIRECT_MM
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_GPIO.DLL \sys\bin\gpio.dll
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EXYIN.DLL \sys\bin\exyin.dll
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\ENET.LDD \sys\bin\enet.ldd
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_ETHERNET.PDD \sys\bin\ethernet.pdd
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_KEYPAD.DLL \sys\bin\keypad.dll
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_I2S.DLL \sys\bin\i2s.dll
#endif
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\ELOCD.LDD \sys\bin\elocd.ldd
#if !defined(WITH_DIRECT_MM) && !defined(INST_ARM4)
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\EVFP.DLL \sys\bin\evfp.dll
#endif
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_MEDINT.PDD \sys\bin\medint.pdd
// ne1_tb estart file
#ifndef WITH_DIRECT_MM
file=\Epoc32\Release\##MAIN##\##BUILD##\_##VARIANT##_e32strt.exe sys\bin\estart.exe HEAPMAX(0x2000)
#endif
//Adding Unistore2 XSR NAND support to the NaviEngine hardware platform
#if defined(_NAND2) || defined(_NANDTEST2)
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_REBOOT.LDD \Sys\Bin\REBOOT.LDD
#include "ne1nand2.iby"
#elif !defined(WITH_DIRECT_MM)
data=\epoc32\rom\##VARIANT##\estart.txt \Sys\Data\ESTART.TXT
#endif
// //extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUS.DLL \sys\bin\epbus.dll
// //extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSV.DLL \sys\bin\epbusv.dll
// //extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_MEDLFS.PDD \sys\bin\medlfs.pdd
// //device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_MEDATA.PDD \sys\bin\medata.pdd
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\ECOMM.LDD \sys\bin\ecomm.ldd
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\PIPELIB.LDD \sys\bin\pipelib.ldd
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\ESOUNDSC.LDD \sys\bin\esoundsc.ldd
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\EXSTART.DLL \sys\bin\exstart.dll
extension[VARID] = \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_RESMANPSL.PDD \sys\bin\resman.pdd
#ifndef WITH_DIRECT_MM
extension[VARID] = \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_PCI.DLL \sys\bin\pci.dll
#endif
#ifndef WITH_DIRECT_MM
#ifdef CSI_STANDALONE_CHANNEL
#ifdef CSITESTS_INCLUDED
device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_d_csi_ctrless.ldd \sys\bin\d_csi.ldd
#endif
#else // CONTROLLER-present
extension[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\IIC.DLL \sys\bin\iic.dll
extension[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_CSI.dll \sys\bin\csi.dll
#ifdef SYMBIAN_USE_DMA_V2
device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_SOUNDSC_V2.PDD \sys\bin\soundsc.pdd
#else
device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_SOUNDSC.PDD \sys\bin\soundsc.pdd
#endif
#ifdef CSITESTS_INCLUDED
device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_d_csi.ldd \sys\bin\d_csi.ldd
#endif
#endif // CSI_STANDALONE_CHANNEL
#endif // WITH_DIRECT_MM
#if defined(PCI_TEST)
extension[VARID] = \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_PCI-test.DLL \sys\bin\pci-test.dll
#endif
#ifdef ENABLE_RESTRICTED_CODE
// USB Client
//device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\USBC.LDD \sys\bin\EUSBC.LDD
// USB Device Driver
//extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_USBCC.DLL \sys\bin\USBCC.DLL
#ifndef __USB
REM Feature USB is not included in this ROM
#else
#ifdef SYMBIAN_ENABLE_USB_OTG_HOST
#include <rom/include/ne1usbhost.iby>
#endif // SYMBIAN_ENABLE_USB_OTG_HOST
// USB Device Driver
// USB LDD
// (The target file name has to be lower case, for otherwise it collides with the macro 'EUSBC'!)
device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\USBC.LDD \Sys\Bin\eusbc.ldd
#ifdef USE_HSUSB
// USB external transceiver driver
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_FIBULA.DLL \Sys\Bin\FIBULA.DLL
#else
// USB PDD
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_USBCC.DLL \sys\bin\USBCC.DLL
#endif // USE_HSUSB, SYMBIAN_ENABLE_USB_OTG_HOST
#endif // __USB
//SD Media Driver
#ifndef WITH_DIRECT_MM
#ifdef MMC_PAGED_ROM
#ifdef SYMBIAN_USE_DMA_V2
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOVDP_V2.DLL \sys\bin\MMC.DLL
#else
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOVDP.DLL \sys\bin\MMC.DLL
#endif
#else
#ifdef SYMBIAN_USE_DMA_V2
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOV_V2.DLL \sys\bin\MMC.DLL
#else
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOV.DLL \sys\bin\MMC.DLL
#endif
#endif
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\EPBUSSD.DLL \sys\bin\EPBUSM.DLL
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\MEDSD.PDD \sys\bin\MEDMMC.PDD
#if defined(USE_NFE)
extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_medtestnfe.pdd \Sys\Bin\medtestnfe.pdd
#endif
#endif // WITH_DIRECT_MM
#endif // ENABLE_RESTRICTED_CODE
// Use correct euser
#ifdef SMP
#define EUSER_DLL euser_v6k_smp.dll
// allow to specify maximum number of CPU cores used in system
#ifdef SMP_NUM_CPUS
patchdata ekern.exe @ KSMPNumCpus ##SMP_NUM_CPUS##
#endif
#else
#define EUSER_DLL euser_v6k.dll
#endif
#ifdef E32TESTS_INCLUDED
// Include optional test drivers for e32test
#ifndef WITH_DIRECT_MM
#ifdef SYMBIAN_USE_DMA_V2
device[VARID]= \epoc32\release\##KMAIN##\##BUILD##\d_dma2.ldd \sys\bin\d_dma2.ldd
device[VARID]= \epoc32\release\##KMAIN##\##BUILD##\d_dma_compat.ldd \sys\bin\d_dma_compat.ldd
#else
device[VARID]= \epoc32\release\##KMAIN##\##BUILD##\d_dma.ldd \sys\bin\d_dma.ldd
device[VARID]= \epoc32\release\##KMAIN##\##BUILD##\d_dma2_compat.ldd \sys\bin\d_dma2_compat.ldd
#endif // SYMBIAN_USE_DMA_V2
#endif // WITH_DIRECT_MM
#ifdef ENABLE_RESTRICTED_CODE
device[VARID]= \epoc32\release\##KMAIN##\##BUILD##\d_medch.ldd \sys\bin\d_medch.ldd
#endif // ENABLE_RESTRICTED_CODE
// this CSI_CTRLESS.dll should be included because of some dependency problems found in BTB,
// that autotest picks up d_csi_ctrless.ldd automatically, which needs this dll in the rom.
extension[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_CSI_CTRLESS.dll \sys\bin\_##VARIANT##_csi_ctrless.dll
#endif // E32TESTS_INCLUDED
#ifdef CSITESTS_INCLUDED
// Include optional test drivers for csi
file=\Epoc32\Release\##KMAIN##\##BUILD##\t_csi.exe \sys\bin\t_csi.exe
#endif