/*

* Copyright (c) 2008-2010 Nokia Corporation and/or its subsidiary(-ies).

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  

* ne1_tb\rom\kernel.iby

* TO DO: (mandatory)

* This file includes all the kernel files for your base port

* Important: 'extension' libraries are started at boot time in the order specified

* in this file, ensure dependencies are considered.

*

*/

#if defined(PAGED_ROM) || defined(PAGED_CODE)

#if !defined(_NAND2) && !defined(_NANDTEST2) && !defined(MMC_PAGED_ROM)

#error Demand paging on h4hrp requires nand2 or mmc support

#endif

#endif

// Rom paging config

#ifdef PAGED_ROM 

pagedrom 

compress

#endif

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_KANAVIENGINE.DLL	\sys\bin\kanaviengine.dll

primary[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\_##MEMMODEL_VARIANT##_EKERN.EXE		\sys\bin\ekern.exe

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_BTRACEX.LDD	\sys\bin\btracex.ldd

variant[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_ECUST.DLL		\sys\bin\ecust.dll

#ifndef WITH_DIRECT_MM

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_HCR.DLL          \sys\bin\hcr.dll

#else

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_WATCHDOG.DLL \sys\bin\watchdog.dll

#endif

//extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_SERIALNO.DLL \sys\bin\serialno.dll

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##MEMMODEL_VARIANT##_EXMONCOMMON.DLL \sys\bin\exmoncommon.dll

#ifdef CRASH_LOG_NAND2

extension[VARID]=	\epoc32\release\##KMAIN##\##BUILD##\_##VARIANT##_exmonlognand.dll	\sys\bin\exmonlog.dll

#endif

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EXMONDEBUG.DLL \sys\bin\exmondebug.dll

#ifndef WITH_DIRECT_MM

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_POWER.DLL		\sys\bin\power.dll

#ifdef SYMBIAN_USE_DMA_V2

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_DMA_V2.DLL		\sys\bin\DMA.DLL

#else

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_DMA.DLL		\sys\bin\DMA.DLL

#endif

#endif

// In the initial phases of development, when neither display and keyboard drivers are available

// you may want to use the VT100 Sreen Driver (which also keyboard input and keyboard translation).

// In that case just include the following line:

#ifdef NAVIENGINE_USE_VT100

#define EDISP_DRV	\EDISP_VT100.DLL

#else

#undef	EDISP_DRV

#endif

#if !defined(EDISP_DRV)

extension[MAGIC]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_lcdgce.PDD			\sys\bin\DISPLAY0.PDD

#if defined(SYMBIAN_BASE_USE_GCE) || defined(SYMBIAN_GRAPHICS_USE_GCE)

device[MAGIC]=\Epoc32\Release\##KMAIN##\##BUILD##\display.ldd							\sys\bin\DISPLAY0.LDD

#endif

#ifdef UBOOTLDR_ROM

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_UBOOTLDRKEYB.DLL	\sys\bin\ekeyb.dll

#else

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_VSERIALKEYB.DLL	\sys\bin\ekeyb.dll

#endif

#endif

//extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EKEYB.DLL		\sys\bin\ekeyb.dll

file[VARID]=		\Epoc32\Release\##MAIN##\##BUILD##\_##VARIANT##_EKDATA.DLL		\sys\bin\ekdata.dll

device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EUART.PDD		\sys\bin\euart.pdd

#ifndef WITH_DIRECT_MM

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_GPIO.DLL		\sys\bin\gpio.dll

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EXYIN.DLL		\sys\bin\exyin.dll

device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\ENET.LDD \sys\bin\enet.ldd

device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_ETHERNET.PDD		\sys\bin\ethernet.pdd

extension[VARID]= 		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_KEYPAD.DLL    	\sys\bin\keypad.dll

extension[VARID]= 		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_I2S.DLL    	\sys\bin\i2s.dll

#endif

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\ELOCD.LDD					\sys\bin\elocd.ldd

#if !defined(WITH_DIRECT_MM) && !defined(INST_ARM4)

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\EVFP.DLL					\sys\bin\evfp.dll

#endif

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_MEDINT.PDD		\sys\bin\medint.pdd

// ne1_tb estart file

#ifndef WITH_DIRECT_MM

file=\Epoc32\Release\##MAIN##\##BUILD##\_##VARIANT##_e32strt.exe					sys\bin\estart.exe HEAPMAX(0x2000)

#endif

//Adding Unistore2 XSR NAND support to the NaviEngine hardware platform

#if defined(_NAND2) || defined(_NANDTEST2)

device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_REBOOT.LDD			\Sys\Bin\REBOOT.LDD

#include "ne1nand2.iby"

#elif !defined(WITH_DIRECT_MM)

data=\epoc32\rom\##VARIANT##\estart.txt		\Sys\Data\ESTART.TXT

#endif

// //extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUS.DLL		\sys\bin\epbus.dll

// //extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSV.DLL		\sys\bin\epbusv.dll

// //extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_MEDLFS.PDD		\sys\bin\medlfs.pdd

// //device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_MEDATA.PDD		\sys\bin\medata.pdd

device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\ECOMM.LDD					\sys\bin\ecomm.ldd

device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\PIPELIB.LDD					\sys\bin\pipelib.ldd

device[VARID]= 		\Epoc32\Release\##KMAIN##\##BUILD##\ESOUNDSC.LDD				\sys\bin\esoundsc.ldd

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\EXSTART.DLL					\sys\bin\exstart.dll

extension[VARID] =	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_RESMANPSL.PDD	\sys\bin\resman.pdd

#ifndef WITH_DIRECT_MM

extension[VARID] =	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_PCI.DLL		\sys\bin\pci.dll

#endif

#ifndef WITH_DIRECT_MM

#ifdef CSI_STANDALONE_CHANNEL

#ifdef CSITESTS_INCLUDED

device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_d_csi_ctrless.ldd 			\sys\bin\d_csi.ldd

#endif

#else // CONTROLLER-present

extension[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\IIC.DLL   				\sys\bin\iic.dll

extension[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_CSI.dll    		\sys\bin\csi.dll

#ifdef SYMBIAN_USE_DMA_V2

device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_SOUNDSC_V2.PDD    	\sys\bin\soundsc.pdd

#else

device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_SOUNDSC.PDD    	\sys\bin\soundsc.pdd

#endif

#ifdef CSITESTS_INCLUDED

device[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_d_csi.ldd 	\sys\bin\d_csi.ldd

#endif

#endif // CSI_STANDALONE_CHANNEL

#endif // WITH_DIRECT_MM

#if defined(PCI_TEST)

extension[VARID] =	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_PCI-test.DLL		\sys\bin\pci-test.dll

#endif

#ifdef ENABLE_RESTRICTED_CODE

// USB Client

//device[VARID]=		\Epoc32\Release\##KMAIN##\##BUILD##\USBC.LDD					\sys\bin\EUSBC.LDD

// USB Device Driver

//extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_USBCC.DLL		\sys\bin\USBCC.DLL

#ifndef __USB

REM Feature USB is not included in this ROM

#else 

#ifdef SYMBIAN_ENABLE_USB_OTG_HOST

#include <rom/include/ne1usbhost.iby>

#endif // SYMBIAN_ENABLE_USB_OTG_HOST

// USB Device Driver

// USB LDD

// (The target file name has to be lower case, for otherwise it collides with the macro 'EUSBC'!)

device[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\USBC.LDD				 	\Sys\Bin\eusbc.ldd

#ifdef USE_HSUSB

// USB external transceiver driver

extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_FIBULA.DLL			\Sys\Bin\FIBULA.DLL

#else 

// USB PDD

extension[VARID]= \Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_USBCC.DLL			\sys\bin\USBCC.DLL

#endif // USE_HSUSB, SYMBIAN_ENABLE_USB_OTG_HOST

#endif // __USB

//SD Media Driver

#ifndef WITH_DIRECT_MM

#ifdef MMC_PAGED_ROM

#ifdef SYMBIAN_USE_DMA_V2

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOVDP_V2.DLL	\sys\bin\MMC.DLL

#else

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOVDP.DLL	\sys\bin\MMC.DLL

#endif

#else

#ifdef SYMBIAN_USE_DMA_V2

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOV_V2.DLL		\sys\bin\MMC.DLL

#else

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_EPBUSSDIOV.DLL		\sys\bin\MMC.DLL

#endif

#endif

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\EPBUSSD.DLL				\sys\bin\EPBUSM.DLL

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\MEDSD.PDD				\sys\bin\MEDMMC.PDD

#if defined(USE_NFE)

extension[VARID]=	\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_medtestnfe.pdd		\Sys\Bin\medtestnfe.pdd

#endif

#endif // WITH_DIRECT_MM

#endif // ENABLE_RESTRICTED_CODE

// Use correct euser

#ifdef SMP

#define	EUSER_DLL	euser_v6k_smp.dll

// allow to specify maximum number of CPU cores used in system

#ifdef SMP_NUM_CPUS

patchdata ekern.exe @ KSMPNumCpus ##SMP_NUM_CPUS##

#endif

#else

#define	EUSER_DLL	euser_v6k.dll

#endif

#ifdef E32TESTS_INCLUDED

// Include optional test drivers for e32test

#ifndef WITH_DIRECT_MM

#ifdef SYMBIAN_USE_DMA_V2

device[VARID]=		\epoc32\release\##KMAIN##\##BUILD##\d_dma2.ldd					\sys\bin\d_dma2.ldd

device[VARID]=		\epoc32\release\##KMAIN##\##BUILD##\d_dma_compat.ldd			\sys\bin\d_dma_compat.ldd

#else

device[VARID]=		\epoc32\release\##KMAIN##\##BUILD##\d_dma.ldd					\sys\bin\d_dma.ldd

device[VARID]=		\epoc32\release\##KMAIN##\##BUILD##\d_dma2_compat.ldd			\sys\bin\d_dma2_compat.ldd

#endif // SYMBIAN_USE_DMA_V2

#endif // WITH_DIRECT_MM

#ifdef ENABLE_RESTRICTED_CODE

device[VARID]=		\epoc32\release\##KMAIN##\##BUILD##\d_medch.ldd					\sys\bin\d_medch.ldd

#endif // ENABLE_RESTRICTED_CODE

// this CSI_CTRLESS.dll should be included because of some dependency problems found in BTB,

// that autotest picks up d_csi_ctrless.ldd automatically, which needs this dll in the rom.

extension[VARID]=\Epoc32\Release\##KMAIN##\##BUILD##\_##VARIANT##_CSI_CTRLESS.dll    	\sys\bin\_##VARIANT##_csi_ctrless.dll

#endif  // E32TESTS_INCLUDED

#ifdef CSITESTS_INCLUDED

// Include optional test drivers for csi

file=\Epoc32\Release\##KMAIN##\##BUILD##\t_csi.exe 	\sys\bin\t_csi.exe

#endif