|
0
|
1 |
/*
|
|
|
2 |
* CmdInterfaceCodes.h
|
|
|
3 |
*
|
|
|
4 |
* Copyright(c) 1998 - 2010 Texas Instruments. All rights reserved.
|
|
|
5 |
* All rights reserved.
|
|
|
6 |
*
|
|
|
7 |
* This program and the accompanying materials are made available under the
|
|
|
8 |
* terms of the Eclipse Public License v1.0 or BSD License which accompanies
|
|
|
9 |
* this distribution. The Eclipse Public License is available at
|
|
|
10 |
* http://www.eclipse.org/legal/epl-v10.html and the BSD License is as below.
|
|
|
11 |
*
|
|
|
12 |
* Redistribution and use in source and binary forms, with or without
|
|
|
13 |
* modification, are permitted provided that the following conditions
|
|
|
14 |
* are met:
|
|
|
15 |
*
|
|
|
16 |
* * Redistributions of source code must retain the above copyright
|
|
|
17 |
* notice, this list of conditions and the following disclaimer.
|
|
|
18 |
* * Redistributions in binary form must reproduce the above copyright
|
|
|
19 |
* notice, this list of conditions and the following disclaimer in
|
|
|
20 |
* the documentation and/or other materials provided with the
|
|
|
21 |
* distribution.
|
|
|
22 |
* * Neither the name Texas Instruments nor the names of its
|
|
|
23 |
* contributors may be used to endorse or promote products derived
|
|
|
24 |
* from this software without specific prior written permission.
|
|
|
25 |
*
|
|
|
26 |
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
|
|
|
27 |
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
|
|
|
28 |
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
|
|
|
29 |
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
|
|
|
30 |
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
|
|
|
31 |
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
|
|
|
32 |
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
|
33 |
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
|
34 |
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
|
35 |
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
|
|
36 |
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
|
37 |
*/
|
|
|
38 |
|
|
|
39 |
|
|
|
40 |
/****************************************************************************/
|
|
|
41 |
/* */
|
|
|
42 |
/* MODULE: CmdInterfaceCodes.h */
|
|
|
43 |
/* PURPOSE: */
|
|
|
44 |
/* */
|
|
|
45 |
/****************************************************************************/
|
|
|
46 |
#ifndef _CMD_INTERFACE_CODES_H_
|
|
|
47 |
#define _CMD_INTERFACE_CODES_H_
|
|
|
48 |
|
|
|
49 |
/** \file CmdInterfaceCodes.h
|
|
|
50 |
* \brief Command Interface Codes
|
|
|
51 |
* \n\n
|
|
|
52 |
* This file contains the definitions for the parameters that can be Set/Get from outside user.
|
|
|
53 |
* \n\n
|
|
|
54 |
*/
|
|
|
55 |
|
|
|
56 |
#include "TWDriver.h"
|
|
|
57 |
|
|
|
58 |
/* defines */
|
|
|
59 |
/***********/
|
|
|
60 |
|
|
|
61 |
/* types */
|
|
|
62 |
/*********/
|
|
|
63 |
|
|
|
64 |
|
|
|
65 |
/* This file contains the definitions for the parameters that can be Set/Get from outside.
|
|
|
66 |
The parmeters that can be Set/Get from inside the driver only are defined in the file paramIn.h */
|
|
|
67 |
|
|
|
68 |
/****************************************************************************
|
|
|
69 |
PARAMETERS ISSUE
|
|
|
70 |
Each parameter in the system is defined as UINT32. The parameter
|
|
|
71 |
structue is as following:
|
|
|
72 |
|
|
|
73 |
bit 31 30 - 24 23 22 - 16 15 - 8 7 - 0
|
|
|
74 |
+-----+----------+-----+----------+-----------+-----------+
|
|
|
75 |
| Set | Reserved | Get | Reserved | Module | Parameter |
|
|
|
76 |
| bit | | bit | | number | number |
|
|
|
77 |
+-----+----------+-----+----------+-----------+-----------+
|
|
|
78 |
|
|
|
79 |
The 'set' bit indicates whteher this parameter can be set from OS abstraction layer.
|
|
|
80 |
The 'get' bit indicates whteher this parameter can be get from OS abstraction layer.
|
|
|
81 |
(All the parameters can be Get/Set from insied the driver.)
|
|
|
82 |
The module number indicated who is the oner of the parameter.
|
|
|
83 |
The parameter number is the parameter unique number used to identify it.
|
|
|
84 |
|
|
|
85 |
****************************************************************************/
|
|
|
86 |
|
|
|
87 |
/** \def SET_BIT
|
|
|
88 |
* \brief Bitmaks of bit which indicates if the Command is SET Command
|
|
|
89 |
*/
|
|
|
90 |
#define SET_BIT 0x08000000
|
|
|
91 |
/** \def GET_BIT
|
|
|
92 |
* \brief Bitmaks of bit which indicates if the Command is GET Command
|
|
|
93 |
*/
|
|
|
94 |
#define GET_BIT 0x00800000
|
|
|
95 |
/** \def ASYNC_PARAM
|
|
|
96 |
* \brief Bitmaks of bit which indicates if the access to the Command Parameter is Async
|
|
|
97 |
*/
|
|
|
98 |
#define ASYNC_PARAM 0x00010000
|
|
|
99 |
/** \def ALLOC_NEEDED_PARAM
|
|
|
100 |
* \brief Bitmaks of bit which indicates if that the data is not allocated in the paramInfo structure
|
|
|
101 |
*/
|
|
|
102 |
#define ALLOC_NEEDED_PARAM 0x00020000
|
|
|
103 |
|
|
|
104 |
|
|
|
105 |
/** \def GET_PARAM_MODULE_NUMBER
|
|
|
106 |
* \brief Macro which gets the Parameter's Module Number from the second byte of x \n
|
|
|
107 |
* x should be taken from Module Parameters Enumeration
|
|
|
108 |
* sa EModuleParam
|
|
|
109 |
*/
|
|
|
110 |
#define GET_PARAM_MODULE_NUMBER(x) ((x & 0x0000FF00) >> 8)
|
|
|
111 |
/** \def IS_PARAM_ASYNC
|
|
|
112 |
* \brief Macro which returns True if access to the Command Parameter is Async \n
|
|
|
113 |
* Otherwise returns False
|
|
|
114 |
*/
|
|
|
115 |
#define IS_PARAM_ASYNC(x) (x & ASYNC_PARAM)
|
|
|
116 |
/** \def IS_ALLOC_NEEDED_PARAM
|
|
|
117 |
* \brief Macro which returns True if data is not allocated in the paramInfo structure \n
|
|
|
118 |
* (there is a need to allocate memory for data). Otherwise returns False
|
|
|
119 |
*/
|
|
|
120 |
#define IS_ALLOC_NEEDED_PARAM(x) (x & ALLOC_NEEDED_PARAM)
|
|
|
121 |
/** \def IS_PARAM_FOR_MODULE
|
|
|
122 |
* \brief Macro which returns True if input param is for input module. \n
|
|
|
123 |
* Otherwise returns False
|
|
|
124 |
*/
|
|
|
125 |
#define IS_PARAM_FOR_MODULE(param, module) ((param & 0x0000FF00) == module)
|
|
|
126 |
|
|
|
127 |
/** \enum EModuleParam
|
|
|
128 |
* \brief Modules Parameters ID
|
|
|
129 |
*
|
|
|
130 |
* \par Description
|
|
|
131 |
* This Enumeration defines all available Modules numbers. \n
|
|
|
132 |
* Note that the actual number is held in the second byte (E.g. 0x0000FF00). \n
|
|
|
133 |
* According to these numbers it is decided to which Module the Command Parameter is destined
|
|
|
134 |
*
|
|
|
135 |
* \sa
|
|
|
136 |
*/
|
|
|
137 |
/* NOTICE! whenever you add a module, you have to increment MAX_PARAM_MODULE_NUMBER as well!!! */
|
|
|
138 |
typedef enum
|
|
|
139 |
{
|
|
|
140 |
DRIVER_MODULE_PARAM = 0x0000, /**< Driver Module Number */
|
|
|
141 |
AUTH_MODULE_PARAM = 0x0100, /**< Authentication Module Number */
|
|
|
142 |
ASSOC_MODULE_PARAM = 0x0200, /**< Association Module Number */
|
|
|
143 |
RX_DATA_MODULE_PARAM = 0x0300, /**< RX Data Module Number */
|
|
|
144 |
TX_CTRL_MODULE_PARAM = 0x0400, /**< TX Control Module Number */
|
|
|
145 |
CTRL_DATA_MODULE_PARAM = 0x0500, /**< Control Data Module Number */
|
|
|
146 |
SITE_MGR_MODULE_PARAM = 0x0600, /**< Site Manager Module Number */
|
|
|
147 |
CONN_MODULE_PARAM = 0x0700, /**< Connection Module Number */
|
|
|
148 |
RSN_MODULE_PARAM = 0x0800, /**< Robust Security NW (RSN) Module Number */
|
|
|
149 |
ADM_CTRL_MODULE_PARAM = 0x0900, /**< ADM Control Module Number */
|
|
|
150 |
TWD_MODULE_PARAM = 0x0A00, /**< Report Module Number */
|
|
|
151 |
REPORT_MODULE_PARAM = 0x0B00, /**< Report Module Number */
|
|
|
152 |
SME_MODULE_PARAM = 0x0C00, /**< SME Module Number */
|
|
|
153 |
MLME_SM_MODULE_PARAM = 0x0D00, /**< 802.11 MLME State-Machine Module Number */
|
|
|
154 |
REGULATORY_DOMAIN_MODULE_PARAM = 0x0E00, /**< Regulatory Domain Module Number */
|
|
|
155 |
MEASUREMENT_MODULE_PARAM = 0x0F00, /**< Measurement Module Number */
|
|
|
156 |
XCC_MANAGER_MODULE_PARAM = 0x1000, /**< XCC Manager Module Number */
|
|
|
157 |
ROAMING_MANAGER_MODULE_PARAM = 0x1100, /**< Roaming Manager Module Number */
|
|
|
158 |
SOFT_GEMINI_PARAM = 0x1200, /**< Soft Gemini Module Number */
|
|
|
159 |
QOS_MANAGER_PARAM = 0x1300, /**< Quality Of Service (QoS) Manager Module Number */
|
|
|
160 |
POWER_MANAGER_PARAM = 0x1400, /**< Power Manager Module Number */
|
|
|
161 |
SCAN_CNCN_PARAM = 0x1500, /**< Scan Concentrator Module Number */
|
|
|
162 |
SCAN_MNGR_PARAM = 0x1600, /**< Scan Manager Module Number */
|
|
|
163 |
MISC_MODULE_PARAM = 0x1700, /**< Misc. Module Number */
|
|
|
164 |
HEALTH_MONITOR_MODULE_PARAM = 0x1800, /**< Health Monitor Module Number */
|
|
|
165 |
|
|
|
166 |
/*
|
|
|
167 |
Last module - DO NOT TOUCH!
|
|
|
168 |
*/
|
|
|
169 |
MODULE_PARAM_LAST_MODULE /**< LAst Module - Dummy, mast be last */
|
|
|
170 |
|
|
|
171 |
} EModuleParam;
|
|
|
172 |
|
|
|
173 |
/** \def MAX_PARAM_MODULE_NUMBER
|
|
|
174 |
* \brief Macro which returns the number of Parameters Modules
|
|
|
175 |
*/
|
|
|
176 |
#define MAX_PARAM_MODULE_NUMBER (GET_PARAM_MODULE_NUMBER(MODULE_PARAM_LAST_MODULE))
|
|
|
177 |
|
|
|
178 |
|
|
|
179 |
|
|
|
180 |
/** \enum EExternalParam
|
|
|
181 |
* \brief External Parameters
|
|
|
182 |
*
|
|
|
183 |
* \par Description
|
|
|
184 |
* This Enumeation includes all the eaxternal parameters numbers which are used for Get/Set Commands.
|
|
|
185 |
* Each module can have 256 parameters \n
|
|
|
186 |
* PARAMETERS ISSUE: \n
|
|
|
187 |
* Each parameter in the system is defined as UINT32. The parameter structue is as following: \n
|
|
|
188 |
* bit 0 - 7: Parameter Number - number of parameter inside Module\n
|
|
|
189 |
* bit 8 - 15: Module number - number of Module\n
|
|
|
190 |
* bit 16: Async Bit - indicates if command is Async (ON) or Sync (OFF)\n
|
|
|
191 |
* bit 17: Allocate Bit - indicates if allocation should be done for parameter (ON) or not (OFF)\n
|
|
|
192 |
* bit 18 - 22: Reserved \n
|
|
|
193 |
* bit 23: Get Bit - indicates if command is Get (ON) or not (OFF) \n
|
|
|
194 |
* bit 24 - 26: Reserved \n
|
|
|
195 |
* bit 27: Set Bit - indicates if command is Set (ON) or not (OFF) \n
|
|
|
196 |
* bit 28 - 31: Reserved \n\n
|
|
|
197 |
* The 'set' bit indicates whteher this parameter can be set from OS abstraction layer.
|
|
|
198 |
* The 'get' bit indicates whteher this parameter can be get from OS abstraction layer.
|
|
|
199 |
* (All the parameters can be Get/Set from insied the driver.)
|
|
|
200 |
* The module number indicated who is the oner of the parameter.
|
|
|
201 |
* The parameter number is the parameter unique number used to identify it.
|
|
|
202 |
*
|
|
|
203 |
* \sa
|
|
|
204 |
*/
|
|
|
205 |
/* bit | 31 - 28 | 27 | 26 - 24 | 23 | 22 - 18 | 17 | 16 | 15 - 8 | 7 - 0 |
|
|
|
206 |
* +----------+-----+----------+-----+----------+----------+-------+-----------+-----------+
|
|
|
207 |
* | Reserved | Set | Reserved | Get | Reserved | Allocate | Async | Module | Parameter |
|
|
|
208 |
* | | bit | | bit | | bit | bit | number | number |
|
|
|
209 |
* +----------+-----+----------+-----+----------+----------+-------+-----------+-----------+
|
|
|
210 |
*/
|
|
|
211 |
typedef enum
|
|
|
212 |
{
|
|
|
213 |
/* Driver General section */
|
|
|
214 |
DRIVER_INIT_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x00, /**< Driver Init Parameter (Driver General Set Command): \n
|
|
|
215 |
* Used for setting driver defaults. Done Sync with no memory allocation\n
|
|
|
216 |
* Parameter Number: 0x00\n
|
|
|
217 |
* Module Number: Driver Module Number \n
|
|
|
218 |
* Async Bit: OFF \n
|
|
|
219 |
* Allocate Bit: OFF \n
|
|
|
220 |
* GET Bit: OFF \n
|
|
|
221 |
* SET Bit: ON \n
|
|
|
222 |
*/
|
|
|
223 |
DRIVER_START_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x01, /**< Driver Start Parameter (Driver General Set Command): \n
|
|
|
224 |
* Used for Starting Driver. Done Sync with no memory allocation\n
|
|
|
225 |
* Parameter Number: 0x01\n
|
|
|
226 |
* Module Number: Driver Module Number \n
|
|
|
227 |
* Async Bit: OFF \n
|
|
|
228 |
* Allocate Bit: OFF \n
|
|
|
229 |
* GET Bit: OFF \n
|
|
|
230 |
* SET Bit: ON \n
|
|
|
231 |
*/
|
|
|
232 |
DRIVER_STOP_PARAM = SET_BIT | DRIVER_MODULE_PARAM | 0x02, /**< Driver Stop Parameter (Driver General Set Command): \n
|
|
|
233 |
* Used for Stopping Driver. Done Sync with no memory allocation \n
|
|
|
234 |
* Parameter Number: 0x02\n
|
|
|
235 |
* Module Number: Driver Module Number \n
|
|
|
236 |
* Async Bit: OFF \n
|
|
|
237 |
* Allocate Bit: OFF \n
|
|
|
238 |
* GET Bit: OFF \n
|
|
|
239 |
* SET Bit: ON \n
|
|
|
240 |
*/
|
|
|
241 |
DRIVER_STATUS_PARAM = GET_BIT | DRIVER_MODULE_PARAM | 0x03, /**< Driver Status Parameter (Driver General Get Command): \n
|
|
|
242 |
* Used for Getting Driver's Status (if running). Done Sync with no memory allocation\n Done Sync with no memory allocation\n
|
|
|
243 |
* Parameter Number: 0x03\n
|
|
|
244 |
* Module Number: Driver Module Number \n
|
|
|
245 |
* Async Bit: OFF \n
|
|
|
246 |
* Allocate Bit: OFF \n
|
|
|
247 |
* GET Bit: ON \n
|
|
|
248 |
* SET Bit: OFF \n
|
|
|
249 |
*/
|
|
|
250 |
DRIVER_THREADID_PARAM = GET_BIT | DRIVER_MODULE_PARAM | 0x04, /**< Driver Thread ID Parameter (Driver General Get Command): \n
|
|
|
251 |
* Used for Getting Driver's Thread ID. Done Sync with no memory allocation\n
|
|
|
252 |
* Parameter Number: 0x04\n
|
|
|
253 |
* Module Number: Driver Module Number \n
|
|
|
254 |
* Async Bit: OFF \n
|
|
|
255 |
* Allocate Bit: OFF \n
|
|
|
256 |
* GET Bit: ON \n
|
|
|
257 |
* SET Bit: OFF \n
|
|
|
258 |
*/
|
|
|
259 |
|
|
|
260 |
/* Site manager section */
|
|
|
261 |
SITE_MGR_DESIRED_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x01, /**< Site Manager Desired Channel Parameter (Site Manager Module Set/Get Command):\n
|
|
|
262 |
* Used for Setting/Getting desired Channel to/from OS abstraction layer\n
|
|
|
263 |
* Done Sync with no memory allocation \n
|
|
|
264 |
* Parameter Number: 0x01\n
|
|
|
265 |
* Module Number: Site Manager Module Number \n
|
|
|
266 |
* Async Bit: OFF \n
|
|
|
267 |
* Allocate Bit: OFF \n
|
|
|
268 |
* GET Bit: ON \n
|
|
|
269 |
* SET Bit: ON \n
|
|
|
270 |
*/
|
|
|
271 |
SITE_MGR_DESIRED_SUPPORTED_RATE_SET_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x05, /**< Site Manager Desired Supported Rate Set Parameter (Site Manager Module Set/Get Command):\n
|
|
|
272 |
* Used for Setting/Getting Desired Supported Rate to/from OS abstraction layer\n
|
|
|
273 |
* Done Sync with no memory allocation \n
|
|
|
274 |
* Parameter Number: 0x05\n
|
|
|
275 |
* Module Number: Site Manager Module Number \n
|
|
|
276 |
* Async Bit: OFF \n
|
|
|
277 |
* Allocate Bit: OFF \n
|
|
|
278 |
* GET Bit: ON \n
|
|
|
279 |
* SET Bit: ON \n
|
|
|
280 |
*/
|
|
|
281 |
SITE_MGR_DESIRED_PREAMBLE_TYPE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0A, /**< Site Manager Desired Preamble Type Parameter (Site Manager Module Set/Get Command): \n
|
|
|
282 |
* Used for Setting/Getting Desired Preamble Type to/from OS abstraction layer\n
|
|
|
283 |
* Done Sync with no memory allocation\n
|
|
|
284 |
* Parameter Number: 0x0A\ n
|
|
|
285 |
* Module Number: Site Manager Module Number \n
|
|
|
286 |
* Async Bit: OFF \n
|
|
|
287 |
* Allocate Bit: OFF \n
|
|
|
288 |
* GET Bit: ON \n
|
|
|
289 |
* SET Bit: ON \n
|
|
|
290 |
*/
|
|
|
291 |
SITE_MGR_CURRENT_CHANNEL_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x0E, /**< Site Manager Current Channel Parameter (Site Manager Module Set/Get Command): \n
|
|
|
292 |
* Used for Setting/Getting Current Channel to/from OS abstraction layer\n
|
|
|
293 |
* Done Sync with no memory allocation\n
|
|
|
294 |
* Parameter Number: 0x0E \n
|
|
|
295 |
* Module Number: Site Manager Module Number \n
|
|
|
296 |
* Async Bit: OFF \n
|
|
|
297 |
* Allocate Bit: OFF \n
|
|
|
298 |
* GET Bit: ON \n
|
|
|
299 |
* SET Bit: ON \n
|
|
|
300 |
*/
|
|
|
301 |
SITE_MGR_TI_WLAN_COUNTERS_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x14, /**< Site Manager TI WLAN Counters Parameter (Site Manager Module Get Command): \n
|
|
|
302 |
* Used for Getting TI WLAN Statistics Counters from OS abstraction layer\n
|
|
|
303 |
* Done Sync with no memory allocation\n
|
|
|
304 |
* Parameter Number: 0x14 \n
|
|
|
305 |
* Module Number: Site Manager Module Number \n
|
|
|
306 |
* Async Bit: OFF \n
|
|
|
307 |
* Allocate Bit: OFF \n
|
|
|
308 |
* GET Bit: ON \n
|
|
|
309 |
* SET Bit: OFF \n
|
|
|
310 |
*/
|
|
|
311 |
SITE_MGR_EEPROM_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x16, /**< Site Manager EEPROM Version Parameter (Site Manager Module Get Command): \n
|
|
|
312 |
* Used for Getting EEPROM Version from FW\n
|
|
|
313 |
* Done Sync with no memory allocation\n
|
|
|
314 |
* Parameter Number: 0x16 \n
|
|
|
315 |
* Module Number: Site Manager Module Number \n
|
|
|
316 |
* Async Bit: OFF \n
|
|
|
317 |
* Allocate Bit: OFF \n
|
|
|
318 |
* GET Bit: ON \n
|
|
|
319 |
* SET Bit: OFF \n
|
|
|
320 |
*/
|
|
|
321 |
SITE_MGR_FIRMWARE_VERSION_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x17, /**< Site Manager FW Version Parameter (Site Manager Module Get Command): \n
|
|
|
322 |
* Used for Getting FW Version from FW\n
|
|
|
323 |
* Done Sync with no memory allocation\n
|
|
|
324 |
* Parameter Number: 0x17 \n
|
|
|
325 |
* Module Number: Site Manager Module Number \n
|
|
|
326 |
* Async Bit: OFF \n
|
|
|
327 |
* Allocate Bit: OFF \n
|
|
|
328 |
* GET Bit: ON \n
|
|
|
329 |
* SET Bit: OFF \n
|
|
|
330 |
*/
|
|
|
331 |
SITE_MGR_DESIRED_SLOT_TIME_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x1B, /**< Site Manager Desired Slot Time Parameter (Site Manager Module Set/Get Command): \n
|
|
|
332 |
* Used for Getting Desired Slot Time from OS abstraction layer and Setting Desired Slot Time to FW\n
|
|
|
333 |
* Done Sync with no memory allocation\n
|
|
|
334 |
* Parameter Number: 0x1B \n
|
|
|
335 |
* Module Number: Site Manager Module Number \n
|
|
|
336 |
* Async Bit: OFF \n
|
|
|
337 |
* Allocate Bit: OFF \n
|
|
|
338 |
* GET Bit: ON \n
|
|
|
339 |
* SET Bit: ON \n
|
|
|
340 |
*/
|
|
|
341 |
SITE_MGR_GET_AP_QOS_CAPABILITIES = GET_BIT | SITE_MGR_MODULE_PARAM | 0x2E, /**< Site Manager Get AP QoS Cpabilities Parameter (Site Manager Module Get Command): \n
|
|
|
342 |
* Used for Getting AP QoS Cpabilities from OS abstraction layer\n
|
|
|
343 |
* Done Sync with no memory allocation\n
|
|
|
344 |
* Parameter Number: 0x2E \n
|
|
|
345 |
* Module Number: Site Manager Module Number \n
|
|
|
346 |
* Async Bit: OFF \n
|
|
|
347 |
* Allocate Bit: OFF \n
|
|
|
348 |
* GET Bit: ON \n
|
|
|
349 |
* SET Bit: OFF \n
|
|
|
350 |
*/
|
|
|
351 |
SITE_MGR_CURRENT_TX_RATE_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x32, /**< Site Manager Current TX Rate Parameter (Site Manager Module Get Command): \n
|
|
|
352 |
* Used for Getting Current TX Rate from OS abstraction layer\n
|
|
|
353 |
* Done Sync with no memory allocation\n
|
|
|
354 |
* Parameter Number: 0x32 \n
|
|
|
355 |
* Module Number: Site Manager Module Number \n
|
|
|
356 |
* Async Bit: OFF \n
|
|
|
357 |
* Allocate Bit: OFF \n
|
|
|
358 |
* GET Bit: ON \n
|
|
|
359 |
* SET Bit: OFF \n
|
|
|
360 |
*/
|
|
|
361 |
SITE_MGR_BSSID_FULL_LIST_PARAM = GET_BIT | SITE_MGR_MODULE_PARAM | 0x34, /**< Site Manager BSSID Full List Parameter (Site Manager Module Get Command): \n
|
|
|
362 |
* Used for Getting BSSID Full List from OS abstraction layer\n
|
|
|
363 |
* Done Sync with no memory allocation\n
|
|
|
364 |
* Parameter Number: 0x34 \n
|
|
|
365 |
* Module Number: Site Manager Module Number \n
|
|
|
366 |
* Async Bit: OFF \n
|
|
|
367 |
* Allocate Bit: OFF \n
|
|
|
368 |
* GET Bit: ON \n
|
|
|
369 |
* SET Bit: OFF \n
|
|
|
370 |
*/
|
|
|
371 |
SITE_MGR_BEACON_FILTER_DESIRED_STATE_PARAM = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x35, /**< Site Manager Beacon Filter Desired State Parameter (Site Manager Module Set/Get Command): \n
|
|
|
372 |
* Used for Getting Beacon Filter Desired State from OS abstraction layer or Setting Beacon Filter Desired State to FW\n
|
|
|
373 |
* Done Sync with no memory allocation\n
|
|
|
374 |
* Parameter Number: 0x35 \n
|
|
|
375 |
* Module Number: Site Manager Module Number \n
|
|
|
376 |
* Async Bit: OFF \n
|
|
|
377 |
* Allocate Bit: OFF \n
|
|
|
378 |
* GET Bit: ON \n
|
|
|
379 |
* SET Bit: ON \n
|
|
|
380 |
*/
|
|
|
381 |
SITE_MGR_NETWORK_TYPE_IN_USE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x36, /**< Site Manager NW Type in Use Parameter (Site Manager Module Get Command): \n
|
|
|
382 |
* Used for Getting NW Type in Use from OS abstraction layer\n
|
|
|
383 |
* Done Sync with no memory allocation\n
|
|
|
384 |
* Parameter Number: 0x36 \n
|
|
|
385 |
* Module Number: Site Manager Module Number \n
|
|
|
386 |
* Async Bit: OFF \n
|
|
|
387 |
* Allocate Bit: OFF \n
|
|
|
388 |
* GET Bit: ON \n
|
|
|
389 |
* SET Bit: OFF \n
|
|
|
390 |
*/
|
|
|
391 |
|
|
|
392 |
/* Simple Config module */
|
|
|
393 |
SITE_MGR_SIMPLE_CONFIG_MODE = SET_BIT | GET_BIT | SITE_MGR_MODULE_PARAM | 0x38, /**< Site Manager Simple Configuration Mode Parameter (Simple Configuration Module Set/Get Command): \n
|
|
|
394 |
* Used for Setting/Getting WiFi Simple Configuration Mode\n
|
|
|
395 |
* Done Sync with no memory allocation\n
|
|
|
396 |
* Parameter Number: 0x38 \n
|
|
|
397 |
* Module Number: Site Manager Module Number \n
|
|
|
398 |
* Async Bit: OFF \n
|
|
|
399 |
* Allocate Bit: OFF \n
|
|
|
400 |
* GET Bit: ON \n
|
|
|
401 |
* SET Bit: ON \n
|
|
|
402 |
*/
|
|
|
403 |
SITE_MGR_GET_PRIMARY_SITE = GET_BIT | SITE_MGR_MODULE_PARAM | 0x40, /**< Site Manager Get Primary Site Parameter (Simple Configuration Module Get Command): \n
|
|
|
404 |
* Used for Getting Primary Site from OS abstraction layer\n
|
|
|
405 |
* Done Sync with no memory allocation\n
|
|
|
406 |
* Parameter Number: 0x40 \n
|
|
|
407 |
* Module Number: Site Manager Module Number \n
|
|
|
408 |
* Async Bit: OFF \n
|
|
|
409 |
* Allocate Bit: OFF \n
|
|
|
410 |
* GET Bit: ON \n
|
|
|
411 |
* SET Bit: OFF \n
|
|
|
412 |
*/
|
|
|
413 |
|
|
|
414 |
SITE_MGR_PRIMARY_SITE_HT_SUPPORT = GET_BIT | SITE_MGR_MODULE_PARAM | 0x41, /**< Site Manager check if the Primary Site support HT: \n
|
|
|
415 |
* Used for check if the Primary Site support HT \n
|
|
|
416 |
* Done Sync with no memory allocation\n
|
|
|
417 |
* Parameter Number: 0x41 \n
|
|
|
418 |
* Module Number: Site Manager Module Number \n
|
|
|
419 |
* Async Bit: OFF \n
|
|
|
420 |
* Allocate Bit: OFF \n
|
|
|
421 |
* GET Bit: ON \n
|
|
|
422 |
* SET Bit: OFF \n
|
|
|
423 |
*/
|
|
|
424 |
/* CTRL data section */
|
|
|
425 |
CTRL_DATA_CURRENT_BSS_TYPE_PARAM = SET_BIT | GET_BIT | CTRL_DATA_MODULE_PARAM | 0x04, /**< Control Data Primary BSS Type Parameter (Control Data Module Set/Get Command): \n
|
|
|
426 |
* Used for Setting/Getting Primary BSS Type to/form Control Data Parameters\n
|
|
|
427 |
* Done Sync with no memory allocation\n
|
|
|
428 |
* Parameter Number: 0x04 \n
|
|
|
429 |
* Module Number: Control Data Module Number \n
|
|
|
430 |
* Async Bit: OFF \n
|
|
|
431 |
* Allocate Bit: OFF \n
|
|
|
432 |
* GET Bit: ON \n
|
|
|
433 |
* SET Bit: ON \n
|
|
|
434 |
*/
|
|
|
435 |
CTRL_DATA_MAC_ADDRESS = GET_BIT | CTRL_DATA_MODULE_PARAM | 0x08, /**< Control Data MAC Address Parameter (Control Data Module Get Command): \n
|
|
|
436 |
* Used for Getting MAC Address form FW\n
|
|
|
437 |
* Done Sync with no memory allocation\n
|
|
|
438 |
* Parameter Number: 0x08 \n
|
|
|
439 |
* Module Number: Control Data Module Number \n
|
|
|
440 |
* Async Bit: OFF \n
|
|
|
441 |
* Allocate Bit: OFF \n
|
|
|
442 |
* GET Bit: ON \n
|
|
|
443 |
* SET Bit: OFF \n
|
|
|
444 |
*/
|
|
|
445 |
CTRL_DATA_CLSFR_TYPE = GET_BIT | CTRL_DATA_MODULE_PARAM | 0x0D, /**< Control Data Classifier Type Parameter (Control Data Module Set/Get Command): \n
|
|
|
446 |
* Used for Setting/Getting Classifier Type to/form Control Data (TX Data Queue) Parameters\n
|
|
|
447 |
* Done Sync with no memory allocation\n
|
|
|
448 |
* Parameter Number: 0x0D \n
|
|
|
449 |
* Module Number: Control Data Module Number \n
|
|
|
450 |
* Async Bit: OFF \n
|
|
|
451 |
* Allocate Bit: OFF \n
|
|
|
452 |
* GET Bit: ON \n
|
|
|
453 |
* SET Bit: OFF \n
|
|
|
454 |
*/
|
|
|
455 |
CTRL_DATA_CLSFR_CONFIG = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x0E, /**< Control Data Classifier Configure Parameter (Control Data Module Set Command): \n
|
|
|
456 |
* Used for adding Classifier entry to Control Data (TX Data Queue) Parameters\n
|
|
|
457 |
* Done Sync with no memory allocation\n
|
|
|
458 |
* Parameter Number: 0x0E \n
|
|
|
459 |
* Module Number: Control Data Module Number \n
|
|
|
460 |
* Async Bit: OFF \n
|
|
|
461 |
* Allocate Bit: OFF \n
|
|
|
462 |
* GET Bit: OFF \n
|
|
|
463 |
* SET Bit: ON \n
|
|
|
464 |
*/
|
|
|
465 |
CTRL_DATA_CLSFR_REMOVE_ENTRY = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x0F, /**< Control Data Classifier Configure Parameter (Control Data Module Set Command): \n
|
|
|
466 |
* Used for removing Classifier entry from Control Data (TX Data Queue) Parameters\n
|
|
|
467 |
* Done Sync with no memory allocation\n
|
|
|
468 |
* Parameter Number: 0x0F \n
|
|
|
469 |
* Module Number: Control Data Module Number \n
|
|
|
470 |
* Async Bit: OFF \n
|
|
|
471 |
* Allocate Bit: OFF \n
|
|
|
472 |
* GET Bit: OFF \n
|
|
|
473 |
* SET Bit: ON \n
|
|
|
474 |
*/
|
|
|
475 |
CTRL_DATA_TRAFFIC_INTENSITY_THRESHOLD = SET_BIT | GET_BIT | CTRL_DATA_MODULE_PARAM | 0x15, /**< Control Data Traffic Intensity Threshold Parameter (Control Data Module Set/Get Command): \n
|
|
|
476 |
* Used for Setting/Getting Traffic Intensity Threshold to/from Control Data (Traffic Intensity Threshold) Parameters\n
|
|
|
477 |
* Done Sync with no memory allocation\n
|
|
|
478 |
* Parameter Number: 0x15 \n
|
|
|
479 |
* Module Number: Control Data Module Number \n
|
|
|
480 |
* Async Bit: OFF \n
|
|
|
481 |
* Allocate Bit: OFF \n
|
|
|
482 |
* GET Bit: ON \n
|
|
|
483 |
* SET Bit: ON \n
|
|
|
484 |
*/
|
|
|
485 |
CTRL_DATA_TOGGLE_TRAFFIC_INTENSITY_EVENTS = SET_BIT | CTRL_DATA_MODULE_PARAM | 0x16, /**< Control Data Toggle Traffic Intensity Events Parameter (Control Data Module Set Command): \n
|
|
|
486 |
* Used for Toggle Traffic Intensity Events (turns ON/OFF traffic intensity notification events) \n
|
|
|
487 |
* Done Sync with no memory allocation\n
|
|
|
488 |
* Parameter Number: 0x16 \n
|
|
|
489 |
* Module Number: Control Data Module Number \n
|
|
|
490 |
* Async Bit: OFF \n
|
|
|
491 |
* Allocate Bit: OFF \n
|
|
|
492 |
* GET Bit: OFF \n
|
|
|
493 |
* SET Bit: ON \n
|
|
|
494 |
*/
|
|
|
495 |
|
|
|
496 |
/* SME SM section */
|
|
|
497 |
SME_DESIRED_SSID_ACT_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x01, /**< SME Set SSID and start connection process (SME Module Set/Get Command): \n
|
|
|
498 |
* Used for set SSID and start connection or get current SSID \n
|
|
|
499 |
* Parameter Number: 0x01 \n
|
|
|
500 |
* Module Number: SME Module Number \n
|
|
|
501 |
* Async Bit: OFF \n
|
|
|
502 |
* Allocate Bit: OFF \n
|
|
|
503 |
* GET Bit: ON \n
|
|
|
504 |
* SET Bit: ON \n
|
|
|
505 |
*/
|
|
|
506 |
|
|
|
507 |
SME_RADIO_ON_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x03, /**< SME State-Machine Radio ON Parameter (SME Module Set/Get Command): \n
|
|
|
508 |
* Used for Setting new and generating State-Machine Event, or Getting current Radio ON\n
|
|
|
509 |
* Done Sync with no memory allocation\n
|
|
|
510 |
* Parameter Number: 0x03 \n
|
|
|
511 |
* Module Number: SME Module Number \n
|
|
|
512 |
* Async Bit: OFF \n
|
|
|
513 |
* Allocate Bit: OFF \n
|
|
|
514 |
* GET Bit: ON \n
|
|
|
515 |
* SET Bit: ON \n
|
|
|
516 |
*/
|
|
|
517 |
SME_CONNECTION_MODE_PARAM = SET_BIT | GET_BIT | SME_MODULE_PARAM | 0x04, /**< SME State-Machine Connection Mode Parameter (SME Module Set/Get Command): \n
|
|
|
518 |
* Used for Setting new Connection Mode (and generating disconnect State-Machine event) or Getting current Connection Mode\n
|
|
|
519 |
* Done Sync with no memory allocation\n
|
|
|
520 |
* Parameter Number: 0x04 \n
|
|
|
521 |
* Module Number: SME Module Number \n
|
|
|
522 |
* Async Bit: OFF \n
|
|
|
523 |
* Allocate Bit: OFF \n
|
|
|
524 |
* GET Bit: ON \n
|
|
|
525 |
* SET Bit: ON \n
|
|
|
526 |
*/
|
|
|
527 |
SME_WSC_PB_MODE_PARAM = SET_BIT | SME_MODULE_PARAM | 0x07, /**< SME State-Machine SME on the WPS Mode Parameter (SME Module Set Command): \n
|
|
|
528 |
* Used for updating the SME on the WPS mode\n
|
|
|
529 |
* Done Sync with no memory allocation\n
|
|
|
530 |
* Parameter Number: 0x07 \n
|
|
|
531 |
* Module Number: SME Module Number \n
|
|
|
532 |
* Async Bit: OFF \n
|
|
|
533 |
* Allocate Bit: OFF \n
|
|
|
534 |
* GET Bit: OFF \n
|
|
|
535 |
* SET Bit: ON \n
|
|
|
536 |
*/
|
|
|
537 |
|
|
|
538 |
SME_DESIRED_SSID_PARAM = SET_BIT | SME_MODULE_PARAM | 0x08, /**< SME Set SSID without start connection process (SME Module Set Command): \n
|
|
|
539 |
* Used for set SSID without connection \n
|
|
|
540 |
* Parameter Number: 0x08 \n
|
|
|
541 |
* Module Number: SME Module Number \n
|
|
|
542 |
* Async Bit: OFF \n
|
|
|
543 |
* Allocate Bit: OFF \n
|
|
|
544 |
* GET Bit: OFF \n
|
|
|
545 |
* SET Bit: ON \n
|
|
|
546 |
*/
|
|
|
547 |
|
|
|
548 |
/* Scan Concentrator section */
|
|
|
549 |
SCAN_CNCN_START_APP_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Concentrator Start Application Scan Parameter (Scan Concentrator Module Set Command): \n
|
|
|
550 |
* Used for start one-shot scan as running application scan client\n
|
|
|
551 |
* Done Sync with memory allocation\n
|
|
|
552 |
* Parameter Number: 0x01 \n
|
|
|
553 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
554 |
* Async Bit: OFF \n
|
|
|
555 |
* Allocate Bit: ON \n
|
|
|
556 |
* GET Bit: OFF \n
|
|
|
557 |
* SET Bit: ON \n
|
|
|
558 |
*/
|
|
|
559 |
SCAN_CNCN_STOP_APP_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x02, /**< Scan Concentrator Stop Application Scan Parameter (Scan Concentrator Module Set Command): \n
|
|
|
560 |
* Used for stop one-shot scan as running application scan client\n
|
|
|
561 |
* Done Sync with no memory allocation\n
|
|
|
562 |
* Parameter Number: 0x02 \n
|
|
|
563 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
564 |
* Async Bit: OFF \n
|
|
|
565 |
* Allocate Bit: OFF \n
|
|
|
566 |
* GET Bit: OFF \n
|
|
|
567 |
* SET Bit: ON \n
|
|
|
568 |
*/
|
|
|
569 |
SCAN_CNCN_START_PERIODIC_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x03 | ALLOC_NEEDED_PARAM, /**< Scan Concentrator Start Periodic Scan Parameter (Scan Concentrator Module Set Command): \n
|
|
|
570 |
* Used for start periodic scan as running application scan client\n
|
|
|
571 |
* Done Sync with memory allocation\n
|
|
|
572 |
* Parameter Number: 0x03 \n
|
|
|
573 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
574 |
* Async Bit: OFF \n
|
|
|
575 |
* Allocate Bit: ON \n
|
|
|
576 |
* GET Bit: OFF \n
|
|
|
577 |
* SET Bit: ON \n
|
|
|
578 |
*/
|
|
|
579 |
SCAN_CNCN_STOP_PERIODIC_SCAN = SET_BIT | SCAN_CNCN_PARAM | 0x04, /**< Scan Concentrator Stop Periodic Scan Parameter (Scan Concentrator Module Set Command): \n
|
|
|
580 |
* Used for stop periodic scan as running application scan client\n
|
|
|
581 |
* Done Sync with no memory allocation\n
|
|
|
582 |
* Parameter Number: 0x04 \n
|
|
|
583 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
584 |
* Async Bit: OFF \n
|
|
|
585 |
* Allocate Bit: OFF \n
|
|
|
586 |
* GET Bit: OFF \n
|
|
|
587 |
* SET Bit: ON \n
|
|
|
588 |
*/
|
|
|
589 |
SCAN_CNCN_BSSID_LIST_SCAN_PARAM = SET_BIT | SCAN_CNCN_PARAM | 0x05, /**< Scan Concentrator BSSID List Scon Parameter (Scan Concentrator Module Set Command): \n
|
|
|
590 |
* Used for start one-shot scan as running application scan client\n
|
|
|
591 |
* Done Sync with no memory allocation\n
|
|
|
592 |
* Parameter Number: 0x05 \n
|
|
|
593 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
594 |
* Async Bit: OFF \n
|
|
|
595 |
* Allocate Bit: OFF \n
|
|
|
596 |
* GET Bit: OFF \n
|
|
|
597 |
* SET Bit: ON \n
|
|
|
598 |
*/
|
|
|
599 |
SCAN_CNCN_BSSID_LIST_SIZE_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x06, /**< Scan Concentrator BSSID List Size Parameter (Scan Concentrator Module Get Command): \n
|
|
|
600 |
* Used for retrieving the size to allocate for the application scan result list\n
|
|
|
601 |
* Done Sync with no memory allocation\n
|
|
|
602 |
* Parameter Number: 0x06 \n
|
|
|
603 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
604 |
* Async Bit: OFF \n
|
|
|
605 |
* Allocate Bit: OFF \n
|
|
|
606 |
* GET Bit: ON \n
|
|
|
607 |
* SET Bit: OFF \n
|
|
|
608 |
*/
|
|
|
609 |
SCAN_CNCN_BSSID_LIST_PARAM = GET_BIT | SCAN_CNCN_PARAM | 0x07, /**< Scan Concentrator BSSID List Parameter (Scan Concentrator Module Get Command): \n
|
|
|
610 |
* Used for retrieving the application scan result table\n
|
|
|
611 |
* Done Sync with no memory allocation\n
|
|
|
612 |
* Parameter Number: 0x07 \n
|
|
|
613 |
* Module Number: Scan Concentrator Module Number \n
|
|
|
614 |
* Async Bit: OFF \n
|
|
|
615 |
* Allocate Bit: OFF \n
|
|
|
616 |
* GET Bit: ON \n
|
|
|
617 |
* SET Bit: OFF \n
|
|
|
618 |
*/
|
|
|
619 |
|
|
|
620 |
/* Scan Manager module */
|
|
|
621 |
SCAN_MNGR_SET_CONFIGURATION = SET_BIT | SCAN_MNGR_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< Scan Manager Set Configuration Parameter (Scan Manager Module Set Command): \n
|
|
|
622 |
* Used for setting the Scan Policy\n
|
|
|
623 |
* Done Sync with memory allocation\n
|
|
|
624 |
* Parameter Number: 0x01 \n
|
|
|
625 |
* Module Number: Scan Manager Module Number \n
|
|
|
626 |
* Async Bit: OFF \n
|
|
|
627 |
* Allocate Bit: ON \n
|
|
|
628 |
* GET Bit: OFF \n
|
|
|
629 |
* SET Bit: ON \n
|
|
|
630 |
*/
|
|
|
631 |
SCAN_MNGR_BSS_LIST_GET = GET_BIT | SCAN_MNGR_PARAM | 0x02 | ALLOC_NEEDED_PARAM, /**< Scan Manager Get BSS List Parameter (Scan Manager Module Get Command): \n
|
|
|
632 |
* Used for getting the currently available BSS list\n
|
|
|
633 |
* Done Sync with memory allocation\n
|
|
|
634 |
* Parameter Number: 0x02 \n
|
|
|
635 |
* Module Number: Scan Manager Module Number \n
|
|
|
636 |
* Async Bit: OFF \n
|
|
|
637 |
* Allocate Bit: ON \n
|
|
|
638 |
* GET Bit: ON \n
|
|
|
639 |
* SET Bit: OFF \n
|
|
|
640 |
*/
|
|
|
641 |
|
|
|
642 |
/* regulatory domain section */
|
|
|
643 |
REGULATORY_DOMAIN_MANAGEMENT_CAPABILITY_ENABLED_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x02, /**< Regulatory Domain Management Capability Enabled Parameter (Regulatory Domain Module Get Command): \n
|
|
|
644 |
* Used for getting indication if Spectrum Management is enabled\n
|
|
|
645 |
* Done Sync with no memory allocation\n
|
|
|
646 |
* Parameter Number: 0x02 \n
|
|
|
647 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
648 |
* Async Bit: OFF \n
|
|
|
649 |
* Allocate Bit: OFF \n
|
|
|
650 |
* GET Bit: ON \n
|
|
|
651 |
* SET Bit: OFF \n
|
|
|
652 |
*/
|
|
|
653 |
REGULATORY_DOMAIN_ENABLED_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x03, /**< Regulatory Domain Enabled Parameter (Regulatory Domain Module Get Command): \n
|
|
|
654 |
* Used for getting indication if regulatory domain if 802.11d is in use\n
|
|
|
655 |
* Done Sync with no memory allocation\n
|
|
|
656 |
* Parameter Number: 0x03 \n
|
|
|
657 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
658 |
* Async Bit: OFF \n
|
|
|
659 |
* Allocate Bit: OFF \n
|
|
|
660 |
* GET Bit: ON \n
|
|
|
661 |
* SET Bit: OFF \n
|
|
|
662 |
*/
|
|
|
663 |
REGULATORY_DOMAIN_CURRENT_TX_POWER_LEVEL_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x06, /**< Regulatory Domain Current TX Power Level Parameter (Regulatory Domain Module Set/Get Command): \n
|
|
|
664 |
* Used for setting/getting current TZ Power Level\n
|
|
|
665 |
* Done Sync with no memory allocation\n
|
|
|
666 |
* Parameter Number: 0x06 \n
|
|
|
667 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
668 |
* Async Bit: OFF \n
|
|
|
669 |
* Allocate Bit: OFF \n
|
|
|
670 |
* GET Bit: ON \n
|
|
|
671 |
* SET Bit: ON \n
|
|
|
672 |
*/
|
|
|
673 |
REGULATORY_DOMAIN_CURRENT_TX_POWER_IN_DBM_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x08, /**< Regulatory Domain Current TX Power in DBM Parameter (Regulatory Domain Module Set/Get Command): \n
|
|
|
674 |
* Used for setting/getting current TX Power Level in DBM\n
|
|
|
675 |
* Done Sync with no memory allocation\n
|
|
|
676 |
* Parameter Number: 0x08 \n
|
|
|
677 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
678 |
* Async Bit: OFF \n
|
|
|
679 |
* Allocate Bit: OFF \n
|
|
|
680 |
* GET Bit: ON \n
|
|
|
681 |
* SET Bit: ON \n
|
|
|
682 |
*/
|
|
|
683 |
REGULATORY_DOMAIN_ENABLE_DISABLE_802_11D = SET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0C, /**< Regulatory Domain Enable/Disable 802.11d Parameter (Regulatory Domain Module Set Command): \n
|
|
|
684 |
* Used for enabling/disabling 802.11d.\n
|
|
|
685 |
* Done Sync with no memory allocation\n
|
|
|
686 |
* Parameter Number: 0x0C \n
|
|
|
687 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
688 |
* Async Bit: OFF \n
|
|
|
689 |
* Allocate Bit: OFF \n
|
|
|
690 |
* GET Bit: OFF \n
|
|
|
691 |
* SET Bit: ON \n
|
|
|
692 |
*/
|
|
|
693 |
REGULATORY_DOMAIN_ENABLE_DISABLE_802_11H = SET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0D, /**< Regulatory Domain Enable/Disable 802.11h Parameter (Regulatory Domain Module Set Command): \n
|
|
|
694 |
* Used for enabling/disabling 802.11h (If 802_11h is enabled, enable 802_11d as well)\n
|
|
|
695 |
* Done Sync with no memory allocation\n
|
|
|
696 |
* Parameter Number: 0x0D \n
|
|
|
697 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
698 |
* Async Bit: OFF \n
|
|
|
699 |
* Allocate Bit: OFF \n
|
|
|
700 |
* GET Bit: OFF \n
|
|
|
701 |
* SET Bit: ON \n
|
|
|
702 |
*/
|
|
|
703 |
REGULATORY_DOMAIN_COUNTRY_2_4_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0E | ALLOC_NEEDED_PARAM, /**< Regulatory Domain Country 2-4 Parameter (Regulatory Domain Module Set/Get Command): \n
|
|
|
704 |
* Used for getting Country String or setting the local country IE per band with the Country IE that was detected in the last passive scan\n
|
|
|
705 |
* Done Sync with memory allocation\n
|
|
|
706 |
* Parameter Number: 0x0E \n
|
|
|
707 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
708 |
* Async Bit: OFF \n
|
|
|
709 |
* Allocate Bit: ON \n
|
|
|
710 |
* GET Bit: ON \n
|
|
|
711 |
* SET Bit: ON \n
|
|
|
712 |
*/
|
|
|
713 |
REGULATORY_DOMAIN_COUNTRY_5_PARAM = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x0F | ALLOC_NEEDED_PARAM, /**< Regulatory Domain Country 5 Parameter (Regulatory Domain Module Set/Get Command): \n
|
|
|
714 |
* Used for getting Country String or setting the local country IE per band with the Country IE that was detected in the last passive scan\n
|
|
|
715 |
* Done Sync with memory allocation\n
|
|
|
716 |
* Parameter Number: 0x0F \n
|
|
|
717 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
718 |
* Async Bit: OFF \n
|
|
|
719 |
* Allocate Bit: ON \n
|
|
|
720 |
* GET Bit: ON \n
|
|
|
721 |
* SET Bit: ON \n
|
|
|
722 |
*/
|
|
|
723 |
REGULATORY_DOMAIN_DFS_CHANNELS_RANGE = SET_BIT | GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x10, /**< Regulatory Domain DFS Channels Parameter (Regulatory Domain Module Set/Get Command): \n
|
|
|
724 |
* Used for config manager in order to set/get a parameter received from the OS abstraction layer\n
|
|
|
725 |
* Done Sync with no memory allocation\n
|
|
|
726 |
* Parameter Number: 0x10 \n
|
|
|
727 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
728 |
* Async Bit: OFF \n
|
|
|
729 |
* Allocate Bit: OFF \n
|
|
|
730 |
* GET Bit: ON \n
|
|
|
731 |
* SET Bit: ON \n
|
|
|
732 |
*/
|
|
|
733 |
REGULATORY_DOMAIN_TX_POWER_LEVEL_TABLE_PARAM = GET_BIT | REGULATORY_DOMAIN_MODULE_PARAM | 0x12, /**< Regulatory Domain TX Power Level Table Parameter (Regulatory Domain Module Get Command): \n
|
|
|
734 |
* Used for getting TX Power Level Table from FW\n
|
|
|
735 |
* Done Sync with no memory allocation\n
|
|
|
736 |
* Parameter Number: 0x12 \n
|
|
|
737 |
* Module Number: Regulatory Domain Module Number \n
|
|
|
738 |
* Async Bit: OFF \n
|
|
|
739 |
* Allocate Bit: OFF \n
|
|
|
740 |
* GET Bit: ON \n
|
|
|
741 |
* SET Bit: OFF \n
|
|
|
742 |
*/
|
|
|
743 |
|
|
|
744 |
/* Power Manager params */
|
|
|
745 |
POWER_MGR_POWER_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x01, /**< Power Manager Power Mode Parameter (Power Manager Module Set/Get Command): \n
|
|
|
746 |
* Used for setting/getting the Power Mode to/from Power Manager Module\n
|
|
|
747 |
* Done Sync with no memory allocation\n
|
|
|
748 |
* Parameter Number: 0x01 \n
|
|
|
749 |
* Module Number: Power Manager Module Number \n
|
|
|
750 |
* Async Bit: OFF \n
|
|
|
751 |
* Allocate Bit: OFF \n
|
|
|
752 |
* GET Bit: ON \n
|
|
|
753 |
* SET Bit: ON \n
|
|
|
754 |
*/
|
|
|
755 |
POWER_MGR_POWER_LEVEL_PS = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x02, /**< Power Manager Power Level Power-Save Parameter (Power Manager Module Set/Get Command): \n
|
|
|
756 |
* Used for getting the Power Level Power-Save from Power Manager Module or setting the Power Level Power-Save to Power Manager Module (and to FW if Power-Save is Enabled)\n
|
|
|
757 |
* Done Sync with no memory allocation\n
|
|
|
758 |
* Parameter Number: 0x02 \n
|
|
|
759 |
* Module Number: Power Manager Module Number \n
|
|
|
760 |
* Async Bit: OFF \n
|
|
|
761 |
* Allocate Bit: OFF \n
|
|
|
762 |
* GET Bit: ON \n
|
|
|
763 |
* SET Bit: ON \n
|
|
|
764 |
*/
|
|
|
765 |
POWER_MGR_POWER_LEVEL_DEFAULT = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x03, /**< Power Manager Power Level Default Parameter (Power Manager Module Set/Get Command): \n
|
|
|
766 |
* Used for getting the Power Level Default from Power Manager Module or setting the Power Level Default to Power Manager Module (and to FW if Power-Save is Enabled)\n
|
|
|
767 |
* Done Sync with no memory allocation\n
|
|
|
768 |
* Parameter Number: 0x03 \n
|
|
|
769 |
* Module Number: Power Manager Module Number \n
|
|
|
770 |
* Async Bit: OFF \n
|
|
|
771 |
* Allocate Bit: OFF \n
|
|
|
772 |
* GET Bit: ON \n
|
|
|
773 |
* SET Bit: ON \n
|
|
|
774 |
*/
|
|
|
775 |
POWER_MGR_POWER_LEVEL_DOZE_MODE = SET_BIT | GET_BIT | POWER_MANAGER_PARAM | 0x04, /**< Power Manager Power Level Doze Mode (short-doze / long-doze) Parameter (Power Manager Module Set/Get Command): \n
|
|
|
776 |
* Used for getting the Power Level Doze Mode from Power Manager Module or setting the Power Level Doze Mode to Power Manager Module (and to FW if Power-Save is Enabled)\n
|
|
|
777 |
* Done Sync with no memory allocation\n
|
|
|
778 |
* Parameter Number: 0x04 \n
|
|
|
779 |
* Module Number: Power Manager Module Number \n
|
|
|
780 |
* Async Bit: OFF \n
|
|
|
781 |
* Allocate Bit: OFF \n
|
|
|
782 |
* GET Bit: ON \n
|
|
|
783 |
* SET Bit: ON \n
|
|
|
784 |
*/
|
|
|
785 |
POWER_MGR_KEEP_ALIVE_ENA_DIS = SET_BIT | POWER_MANAGER_PARAM | 0x05, /**< Power Manager Keep Alive Enable/Disable Parameter (Power Manager Module Set Command): \n
|
|
|
786 |
* Used for setting the Keep Alive Enable/Disable to Power Manager and FW\n
|
|
|
787 |
* Done Sync with no memory allocation\n
|
|
|
788 |
* Parameter Number: 0x05 \n
|
|
|
789 |
* Module Number: Power Manager Module Number \n
|
|
|
790 |
* Async Bit: OFF \n
|
|
|
791 |
* Allocate Bit: OFF \n
|
|
|
792 |
* GET Bit: OFF \n
|
|
|
793 |
* SET Bit: ON \n
|
|
|
794 |
*/
|
|
|
795 |
POWER_MGR_KEEP_ALIVE_ADD_REM = SET_BIT | POWER_MANAGER_PARAM | 0x06 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive add REM Parameter (Power Manager Module Set Command): \n
|
|
|
796 |
* Used for setting addition/removal of a template and global enable/disable flag to Power Manager and FW\n
|
|
|
797 |
* Done Sync with memory allocation\n
|
|
|
798 |
* Parameter Number: 0x06 \n
|
|
|
799 |
* Module Number: Power Manager Module Number \n
|
|
|
800 |
* Async Bit: OFF \n
|
|
|
801 |
* Allocate Bit: ON \n
|
|
|
802 |
* GET Bit: OFF \n
|
|
|
803 |
* SET Bit: ON \n
|
|
|
804 |
*/
|
|
|
805 |
POWER_MGR_KEEP_ALIVE_GET_CONFIG = GET_BIT | POWER_MANAGER_PARAM | 0x07 | ALLOC_NEEDED_PARAM, /**< Power Manager Keep Alive Get Configuration Parameter (Power Manager Module Get Command): \n
|
|
|
806 |
* Used for getting the Keep Alive current Configuration\n
|
|
|
807 |
* Done Sync with memory allocation\n
|
|
|
808 |
* Parameter Number: 0x07 \n
|
|
|
809 |
* Module Number: Power Manager Module Number \n
|
|
|
810 |
* Async Bit: OFF \n
|
|
|
811 |
* Allocate Bit: ON \n
|
|
|
812 |
* GET Bit: ON \n
|
|
|
813 |
* SET Bit: OFF \n
|
|
|
814 |
*/
|
|
|
815 |
|
|
|
816 |
/* Robust Security NW (RSN) section */
|
|
|
817 |
RSN_ENCRYPTION_STATUS_PARAM = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x04, /**< Robust Security NW (RSN) Encryption Status Parameter (RSN Module Set/Get Command): \n
|
|
|
818 |
* Used for setting/getting Encryption Status to/from RSN Module\n
|
|
|
819 |
* Done Sync with no memory allocation\n
|
|
|
820 |
* Parameter Number: 0x04 \n
|
|
|
821 |
* Module Number: RSN Module Number \n
|
|
|
822 |
* Async Bit: OFF \n
|
|
|
823 |
* Allocate Bit: OFF \n
|
|
|
824 |
* GET Bit: ON \n
|
|
|
825 |
* SET Bit: ON \n
|
|
|
826 |
*/
|
|
|
827 |
RSN_ADD_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x05, /**< Robust Security NW (RSN) Add Key Parameter (RSN Module Set Command): \n
|
|
|
828 |
* Used for adding RSN Key to FW\n
|
|
|
829 |
* Done Sync with no memory allocation\n
|
|
|
830 |
* Parameter Number: 0x05 \n
|
|
|
831 |
* Module Number: RSN Module Number \n
|
|
|
832 |
* Async Bit: OFF \n
|
|
|
833 |
* Allocate Bit: OFF \n
|
|
|
834 |
* GET Bit: OFF \n
|
|
|
835 |
* SET Bit: ON \n
|
|
|
836 |
*/
|
|
|
837 |
RSN_REMOVE_KEY_PARAM = SET_BIT | RSN_MODULE_PARAM | 0x06, /**< Robust Security NW (RSN) Remove Key Parameter (RSN Module Set Command): \n
|
|
|
838 |
* Used for removing RSN Key from FW\n
|
|
|
839 |
* Done Sync with no memory allocation\n
|
|
|
840 |
* Parameter Number: 0x06 \n
|
|
|
841 |
* Module Number: RSN Module Number \n
|
|
|
842 |
* Async Bit: OFF \n
|
|
|
843 |
* Allocate Bit: OFF \n
|
|
|
844 |
* GET Bit: OFF \n
|
|
|
845 |
* SET Bit: ON \n
|
|
|
846 |
*/
|
|
|
847 |
RSN_EXT_AUTHENTICATION_MODE = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x07, /**< Robust Security NW (RSN) External Authentication Mode Parameter (RSN Module Set/Get Command): \n
|
|
|
848 |
* Used for getting RSN External Authentication Mode from RSN Module or setting RSN External Authentication Mode to FW and RSN Module\n
|
|
|
849 |
* Done Sync with no memory allocation\n
|
|
|
850 |
* Parameter Number: 0x07 \n
|
|
|
851 |
* Module Number: RSN Module Number \n
|
|
|
852 |
* Async Bit: OFF \n
|
|
|
853 |
* Allocate Bit: OFF \n
|
|
|
854 |
* GET Bit: ON \n
|
|
|
855 |
* SET Bit: ON \n
|
|
|
856 |
*/
|
|
|
857 |
RSN_MIXED_MODE = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x08, /**< Robust Security NW (RSN) Mixed Mode Parameter (RSN Module Set/Get Command): \n
|
|
|
858 |
* Used for setting/getting RSN Mixed Mode to/from RSN Module\n
|
|
|
859 |
* Done Sync with no memory allocation\n
|
|
|
860 |
* Parameter Number: 0x08 \n
|
|
|
861 |
* Module Number: RSN Module Number \n
|
|
|
862 |
* Async Bit: OFF \n
|
|
|
863 |
* Allocate Bit: OFF \n
|
|
|
864 |
* GET Bit: ON \n
|
|
|
865 |
* SET Bit: ON \n
|
|
|
866 |
*/
|
|
|
867 |
RSN_DEFAULT_KEY_ID = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x09, /**< Robust Security NW (RSN) Defualt Key ID Parameter (RSN Module Set/Get Command): \n
|
|
|
868 |
* Used for getting RSN defualt Key ID from RSN Module or setting RSN defualt Key ID to FW and RSN Module\n
|
|
|
869 |
* Done Sync with no memory allocation\n
|
|
|
870 |
* Parameter Number: 0x09 \n
|
|
|
871 |
* Module Number: RSN Module Number \n
|
|
|
872 |
* Async Bit: OFF \n
|
|
|
873 |
* Allocate Bit: OFF \n
|
|
|
874 |
* GET Bit: ON \n
|
|
|
875 |
* SET Bit: ON \n
|
|
|
876 |
*/
|
|
|
877 |
RSN_XCC_NETWORK_EAP = SET_BIT | GET_BIT | RSN_MODULE_PARAM | 0x0A, /**< Robust Security NW (RSN) XCC NW EAP Parameter (RSN Module Set/Get Command): \n
|
|
|
878 |
* Used for setting/getting RSN XCC NW EAP to/from RSN Module\n
|
|
|
879 |
* Done Sync with no memory allocation\n
|
|
|
880 |
* Parameter Number: 0x0A \n
|
|
|
881 |
* Module Number: RSN Module Number \n
|
|
|
882 |
* Async Bit: OFF \n
|
|
|
883 |
* Allocate Bit: OFF \n
|
|
|
884 |
* GET Bit: ON \n
|
|
|
885 |
* SET Bit: ON \n
|
|
|
886 |
*/
|
|
|
887 |
|
|
|
888 |
/* TWD Control section */
|
|
|
889 |
TWD_RTS_THRESHOLD_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_RTS_THRESHOLD_PARAM_ID, /**< TWD Control RTS Threshold Parameter (TWD Control Module Set/Get Command): \n
|
|
|
890 |
* Used for getting RTS Threshold from TWD Control Module or setting RTS Threshold to FW and TWD Control Module\n
|
|
|
891 |
* Done Sync with no memory allocation\n
|
|
|
892 |
* Parameter Number: TWD_RTS_THRESHOLD_PARAM_ID \n
|
|
|
893 |
* Module Number: TWD Control Module Number \n
|
|
|
894 |
* Async Bit: OFF \n
|
|
|
895 |
* Allocate Bit: OFF \n
|
|
|
896 |
* GET Bit: ON \n
|
|
|
897 |
* SET Bit: ON \n
|
|
|
898 |
*/
|
|
|
899 |
TWD_FRAG_THRESHOLD_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_FRAG_THRESHOLD_PARAM_ID, /**< TWD Control Fragmentation Threshold Parameter (TWD Control Module Set/Get Command): \n
|
|
|
900 |
* Used for getting Fragmentation Threshold from TWD Control Module or setting Fragmentation Threshold to FW and TWD Control Module\n
|
|
|
901 |
* Done Sync with no memory allocation\n
|
|
|
902 |
* Parameter Number: TWD_FRAG_THRESHOLD_PARAM_ID \n
|
|
|
903 |
* Module Number: TWD Control Module Number \n
|
|
|
904 |
* Async Bit: OFF \n
|
|
|
905 |
* Allocate Bit: OFF \n
|
|
|
906 |
* GET Bit: ON \n
|
|
|
907 |
* SET Bit: ON \n
|
|
|
908 |
*/
|
|
|
909 |
TWD_RSSI_LEVEL_PARAM = GET_BIT | TWD_MODULE_PARAM | TWD_RSSI_LEVEL_PARAM_ID | ASYNC_PARAM, /**< TWD Control RSSI Level Parameter (TWD Control Module Get Command): \n
|
|
|
910 |
* Used for getting RSSI Level From FW\n
|
|
|
911 |
* Done Async with no memory allocation\n
|
|
|
912 |
* Parameter Number: TWD_RSSI_LEVEL_PARAM_ID \n
|
|
|
913 |
* Module Number: TWD Control Module Number \n
|
|
|
914 |
* Async Bit: ON \n
|
|
|
915 |
* Allocate Bit: OFF \n
|
|
|
916 |
* GET Bit: ON \n
|
|
|
917 |
* SET Bit: OFF \n
|
|
|
918 |
*/
|
|
|
919 |
TWD_SNR_RATIO_PARAM = GET_BIT | TWD_MODULE_PARAM | TWD_SNR_RATIO_PARAM_ID | ASYNC_PARAM, /**< TWD Control SNR Radio Parameter (TWD Control Module Get Command): \n
|
|
|
920 |
* Used for getting SNR Radio From FW (same outcome as TWD_RSSI_LEVEL_PARAM)\n
|
|
|
921 |
* Done Async with no memory allocation\n
|
|
|
922 |
* Parameter Number: TWD_SNR_RATIO_PARAM_ID \n
|
|
|
923 |
* Module Number: TWD Control Module Number \n
|
|
|
924 |
* Async Bit: ON \n
|
|
|
925 |
* Allocate Bit: OFF \n
|
|
|
926 |
* GET Bit: ON \n
|
|
|
927 |
* SET Bit: OFF \n
|
|
|
928 |
*/
|
|
|
929 |
|
|
|
930 |
/*for BIP/PLT/Radio Debug Tests --> supports Set + GET*/
|
|
|
931 |
TWD_RADIO_TEST_PARAM = SET_BIT | GET_BIT | TWD_MODULE_PARAM | TWD_RADIO_TEST_PARAM_ID | ASYNC_PARAM, /**< TWD Control SNR Radio Parameter (TWD Control Module Set/Get Command): \n
|
|
|
932 |
* Used for performing BIP/PLT/Radio Debug Tests\n
|
|
|
933 |
* Done Async with no memory allocation\n
|
|
|
934 |
* Parameter Number: TWD_RADIO_TEST_PARAM_ID \n
|
|
|
935 |
* Module Number: TWD Control Module Number \n
|
|
|
936 |
* Async Bit: ON \n
|
|
|
937 |
* Allocate Bit: OFF \n
|
|
|
938 |
* GET Bit: ON \n
|
|
|
939 |
* SET Bit: ON \n
|
|
|
940 |
*/
|
|
|
941 |
|
|
|
942 |
TWD_FM_COEX_PARAM = SET_BIT | TWD_MODULE_PARAM | TWD_FM_COEX_PARAM_ID, /**< TWD Control FM-Coexistence Parameters (TWD Control Module Set/Get Command): \n
|
|
|
943 |
* Used for setting the FM-Coexistence Parameters\n
|
|
|
944 |
* Done Async with no memory allocation\n
|
|
|
945 |
* Parameter Number: TWD_FM_COEX_PARAM_ID \n
|
|
|
946 |
* Module Number: TWD Control Module Number \n
|
|
|
947 |
* Async Bit: ON \n
|
|
|
948 |
* Allocate Bit: OFF \n
|
|
|
949 |
* GET Bit: OFF \n
|
|
|
950 |
* SET Bit: ON \n
|
|
|
951 |
*/
|
|
|
952 |
|
|
|
953 |
/* Roaming manager */
|
|
|
954 |
ROAMING_MNGR_APPLICATION_CONFIGURATION = SET_BIT | GET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x01, /**< Roaming Manager Application Configuration Parameter (Roaming Manager Module Set/Get Command): \n
|
|
|
955 |
* Used for setting/getting Roaming Manager Application Configuration to/from Roaming Manager Module and State-Machine\n
|
|
|
956 |
* Done Sync with no memory allocation\n
|
|
|
957 |
* Parameter Number: 0x01 \n
|
|
|
958 |
* Module Number: Roaming Manager Module Number \n
|
|
|
959 |
* Async Bit: OFF \n
|
|
|
960 |
* Allocate Bit: OFF \n
|
|
|
961 |
* GET Bit: ON \n
|
|
|
962 |
* SET Bit: ON \n
|
|
|
963 |
*/
|
|
|
964 |
ROAMING_MNGR_USER_DEFINED_TRIGGER = SET_BIT | ROAMING_MANAGER_MODULE_PARAM | 0x02, /**< Roaming Manager User Defined Trigger Parameter (Roaming Manager Module Set Command): \n
|
|
|
965 |
* Used for setting user-defined trigger to FW\n
|
|
|
966 |
* Done Sync with no memory allocation\n
|
|
|
967 |
* Parameter Number: 0x02 \n
|
|
|
968 |
* Module Number: Roaming Manager Module Number \n
|
|
|
969 |
* Async Bit: OFF \n
|
|
|
970 |
* Allocate Bit: OFF \n
|
|
|
971 |
* GET Bit: OFF \n
|
|
|
972 |
* SET Bit: ON \n
|
|
|
973 |
*/
|
|
|
974 |
|
|
|
975 |
/* QOS manager params */
|
|
|
976 |
QOS_MNGR_SET_OS_PARAMS = SET_BIT | QOS_MANAGER_PARAM | 0x10, /**< QoS Manager Set OS Parameter (QoS Module Set Command): \n
|
|
|
977 |
* Used for setting Quality Of Service Manager's Parameters\n
|
|
|
978 |
* Done Sync with no memory allocation\n
|
|
|
979 |
* Parameter Number: 0x10 \n
|
|
|
980 |
* Module Number: QoS Module Number \n
|
|
|
981 |
* Async Bit: OFF \n
|
|
|
982 |
* Allocate Bit: OFF \n
|
|
|
983 |
* GET Bit: OFF \n
|
|
|
984 |
* SET Bit: ON \n
|
|
|
985 |
*/
|
|
|
986 |
QOS_MNGR_AP_QOS_PARAMETERS = GET_BIT | QOS_MANAGER_PARAM | 0x11, /**< QoS Manager AP QoS Parameter (QoS Module Get Command): \n
|
|
|
987 |
* Used for getting current AP QoS Parameters from QoS Module\n
|
|
|
988 |
* Done Sync with no memory allocation\n
|
|
|
989 |
* Parameter Number: 0x11 \n
|
|
|
990 |
* Module Number: QoS Module Number \n
|
|
|
991 |
* Async Bit: OFF \n
|
|
|
992 |
* Allocate Bit: OFF \n
|
|
|
993 |
* GET Bit: ON \n
|
|
|
994 |
* SET Bit: OFF \n
|
|
|
995 |
*/
|
|
|
996 |
QOS_MNGR_OS_TSPEC_PARAMS = GET_BIT | QOS_MANAGER_PARAM | 0x12, /**< QoS Manager OS TSPEC Parameter (QoS Module Get Command): \n
|
|
|
997 |
* Used for getting current OS 802.11 QoS TSPEC Parameters from QoS Module\n
|
|
|
998 |
* Done Sync with no memory allocation\n
|
|
|
999 |
* Parameter Number: 0x12 \n
|
|
|
1000 |
* Module Number: QoS Module Number \n
|
|
|
1001 |
* Async Bit: OFF \n
|
|
|
1002 |
* Allocate Bit: OFF \n
|
|
|
1003 |
* GET Bit: ON \n
|
|
|
1004 |
* SET Bit: OFF \n
|
|
|
1005 |
*/
|
|
|
1006 |
QOS_MNGR_AC_STATUS = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x13, /**< QoS Manager AC Status Parameter (QoS Module Set/Get Command): \n
|
|
|
1007 |
* Used for setting/getting SC Status\n
|
|
|
1008 |
* Done Sync with no memory allocation\n
|
|
|
1009 |
* Parameter Number: 0x13 \n
|
|
|
1010 |
* Module Number: QoS Module Number \n
|
|
|
1011 |
* Async Bit: OFF \n
|
|
|
1012 |
* Allocate Bit: OFF \n
|
|
|
1013 |
* GET Bit: ON \n
|
|
|
1014 |
* SET Bit: ON \n
|
|
|
1015 |
*/
|
|
|
1016 |
QOS_MNGR_ADD_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x14, /**< QoS Manager Add TSPEC Request Parameter (QoS Module Set Command): \n
|
|
|
1017 |
* Used for setting TSPEC Parameters to QoS Module\n
|
|
|
1018 |
* Done Sync with no memory allocation\n
|
|
|
1019 |
* Parameter Number: 0x14 \n
|
|
|
1020 |
* Module Number: QoS Module Number \n
|
|
|
1021 |
* Async Bit: OFF \n
|
|
|
1022 |
* Allocate Bit: OFF \n
|
|
|
1023 |
* GET Bit: OFF \n
|
|
|
1024 |
* SET Bit: ON \n
|
|
|
1025 |
*/
|
|
|
1026 |
QOS_MNGR_DEL_TSPEC_REQUEST = SET_BIT | QOS_MANAGER_PARAM | 0x15, /**< QoS Manager Delete TSPEC Request Parameter (QoS Module Set Command): \n
|
|
|
1027 |
* Used for deleting TSPEC Parameters from QoS Module\n
|
|
|
1028 |
* Done Sync with no memory allocation\n
|
|
|
1029 |
* Parameter Number: 0x15 \n
|
|
|
1030 |
* Module Number: QoS Module Number \n
|
|
|
1031 |
* Async Bit: OFF \n
|
|
|
1032 |
* Allocate Bit: OFF \n
|
|
|
1033 |
* GET Bit: OFF \n
|
|
|
1034 |
* SET Bit: ON \n
|
|
|
1035 |
*/
|
|
|
1036 |
QOS_MNGR_GET_DESIRED_PS_MODE = GET_BIT | QOS_MANAGER_PARAM | 0x17, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Get Command): \n
|
|
|
1037 |
* Used for getting the current desired Power-Save Mode from QoS Module\n
|
|
|
1038 |
* Done Sync with no memory allocation\n
|
|
|
1039 |
* Parameter Number: 0x17 \n
|
|
|
1040 |
* Module Number: QoS Module Number \n
|
|
|
1041 |
* Async Bit: OFF \n
|
|
|
1042 |
* Allocate Bit: OFF \n
|
|
|
1043 |
* GET Bit: ON \n
|
|
|
1044 |
* SET Bit: OFF \n
|
|
|
1045 |
*/
|
|
|
1046 |
QOS_SET_RX_TIME_OUT = SET_BIT | QOS_MANAGER_PARAM | 0x18, /**< QoS Manager Get Desired Power-Save Mode Parameter (QoS Module Set Command): \n
|
|
|
1047 |
* Used for setting RX Time Out (PS poll and UPSD) to FW and in QoS Module\n
|
|
|
1048 |
* Done Sync with no memory allocation\n
|
|
|
1049 |
* Parameter Number: 0x18 \n
|
|
|
1050 |
* Module Number: QoS Module Number \n
|
|
|
1051 |
* Async Bit: OFF \n
|
|
|
1052 |
* Allocate Bit: OFF \n
|
|
|
1053 |
* GET Bit: OFF \n
|
|
|
1054 |
* SET Bit: ON \n
|
|
|
1055 |
*/
|
|
|
1056 |
QOS_MNGR_PS_RX_STREAMING = SET_BIT | GET_BIT | QOS_MANAGER_PARAM | 0x19, /**< QoS Manager Set Power-Save RX Streaming Parameter (QoS Module Set/Get Command): \n
|
|
|
1057 |
* Used for getting Power-Save RX Streaming or setting Power-Save RX Streaming to FW and in QoS Module\n
|
|
|
1058 |
* Done Sync with no memory allocation\n
|
|
|
1059 |
* Parameter Number: 0x19 \n
|
|
|
1060 |
* Module Number: QoS Module Number \n
|
|
|
1061 |
* Async Bit: OFF \n
|
|
|
1062 |
* Allocate Bit: OFF \n
|
|
|
1063 |
* GET Bit: ON \n
|
|
|
1064 |
* SET Bit: ON \n
|
|
|
1065 |
*/
|
|
|
1066 |
|
|
|
1067 |
/* Soft Gemini params */
|
|
|
1068 |
SOFT_GEMINI_SET_ENABLE = SET_BIT | SOFT_GEMINI_PARAM | 0x01, /**< Soft Gimini Parameters Set Enable Parameter (Soft Gimini Parameters Module Set Command): \n
|
|
|
1069 |
* Used for configuring Soft Gimini enable Mode (Enable|Disable|Auto) in FW\n
|
|
|
1070 |
* Done Sync with no memory allocation\n
|
|
|
1071 |
* Parameter Number: 0x01 \n
|
|
|
1072 |
* Module Number: Soft Gimini Parameters Module Number \n
|
|
|
1073 |
* Async Bit: OFF \n
|
|
|
1074 |
* Allocate Bit: OFF \n
|
|
|
1075 |
* GET Bit: OFF \n
|
|
|
1076 |
* SET Bit: ON \n
|
|
|
1077 |
*/
|
|
|
1078 |
SOFT_GEMINI_SET_CONFIG = SET_BIT | SOFT_GEMINI_PARAM | 0x03, /**< Soft Gimini Parameters Set Configuration Parameter (Soft Gimini Parameters Module Set Command): \n
|
|
|
1079 |
* Used for setting Soft Gimini Configuration to FW\n
|
|
|
1080 |
* Done Sync with no memory allocation\n
|
|
|
1081 |
* Parameter Number: 0x03 \n
|
|
|
1082 |
* Module Number: Soft Gimini Parameters Module Number \n
|
|
|
1083 |
* Async Bit: OFF \n
|
|
|
1084 |
* Allocate Bit: OFF \n
|
|
|
1085 |
* GET Bit: OFF \n
|
|
|
1086 |
* SET Bit: ON \n
|
|
|
1087 |
*/
|
|
|
1088 |
SOFT_GEMINI_GET_CONFIG = GET_BIT | SOFT_GEMINI_PARAM | 0x04, /**< Soft Gimini Parameters Get Configuration Parameter (Soft Gimini Parameters Module Get Command): \n
|
|
|
1089 |
* Used for getting Soft Gimini Configuration\n
|
|
|
1090 |
* Done Sync with no memory allocation\n
|
|
|
1091 |
* Parameter Number: 0x04 \n
|
|
|
1092 |
* Module Number: Soft Gimini Parameters Module Number \n
|
|
|
1093 |
* Async Bit: OFF \n
|
|
|
1094 |
* Allocate Bit: OFF \n
|
|
|
1095 |
* GET Bit: ON \n
|
|
|
1096 |
* SET Bit: OFF \n
|
|
|
1097 |
*/
|
|
|
1098 |
|
|
|
1099 |
/* REPORT section */
|
|
|
1100 |
REPORT_MODULE_TABLE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x01, /**< Report Module Table Parameter (Report Module Set/Get Command): \n
|
|
|
1101 |
* Used for setting/getting Report Module Table (Tble of all Logged Modules)\n
|
|
|
1102 |
* Done Sync with no memory allocation\n
|
|
|
1103 |
* Parameter Number: 0x01 \n
|
|
|
1104 |
* Module Number: Report Module Number \n
|
|
|
1105 |
* Async Bit: OFF \n
|
|
|
1106 |
* Allocate Bit: OFF \n
|
|
|
1107 |
* GET Bit: ON \n
|
|
|
1108 |
* SET Bit: ON \n
|
|
|
1109 |
*/
|
|
|
1110 |
REPORT_SEVERITY_TABLE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x02, /**< Report Severity Table Parameter (Report Module Set/Get Command): \n
|
|
|
1111 |
* Used for setting/getting the Severity Table (holds availble severity Levels of the event which is reported to user)\n
|
|
|
1112 |
* Done Sync with no memory allocation\n
|
|
|
1113 |
* Parameter Number: 0x02 \n
|
|
|
1114 |
* Module Number: Report Module Number \n
|
|
|
1115 |
* Async Bit: OFF \n
|
|
|
1116 |
* Allocate Bit: OFF \n
|
|
|
1117 |
* GET Bit: ON \n
|
|
|
1118 |
* SET Bit: ON \n
|
|
|
1119 |
*/
|
|
|
1120 |
REPORT_MODULE_ON_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x03, /**< Report Module ON Parameter (Report Module Set/Get Command): \n
|
|
|
1121 |
* Used for setting (Enable) ceratin Logged Module in Report Modules Table or getting the Reported Module Status from Table (Enabled/Disabled)\n
|
|
|
1122 |
* Done Sync with no memory allocation\n
|
|
|
1123 |
* Parameter Number: 0x03 \n
|
|
|
1124 |
* Module Number: Report Module Number \n
|
|
|
1125 |
* Async Bit: OFF \n
|
|
|
1126 |
* Allocate Bit: OFF \n
|
|
|
1127 |
* GET Bit: ON \n
|
|
|
1128 |
* SET Bit: ON \n
|
|
|
1129 |
*/
|
|
|
1130 |
REPORT_MODULE_OFF_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x04, /**< Report Module OFF Parameter (Report Module Set/Get Command): \n
|
|
|
1131 |
* Used for setting (Disable) ceratin Logged Module in Report Modules Table or getting the Reported Module Status from Table (Enabled/Disabled)\n
|
|
|
1132 |
* Done Sync with no memory allocation\n
|
|
|
1133 |
* Parameter Number: 0x04 \n
|
|
|
1134 |
* Module Number: Report Module Number \n
|
|
|
1135 |
* Async Bit: OFF \n
|
|
|
1136 |
* Allocate Bit: OFF \n
|
|
|
1137 |
* GET Bit: ON \n
|
|
|
1138 |
* SET Bit: ON \n
|
|
|
1139 |
*/
|
|
|
1140 |
REPORT_PPMODE_VALUE_PARAM = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x05, /**< Report PP MODE Value Parameter (Report Module Set/Get Command): \n
|
|
|
1141 |
* Used for setting (Enable/Disable) or Getting the Debug Mode flag, which indicates whether debug module should be used or not\n
|
|
|
1142 |
* Done Sync with no memory allocation\n
|
|
|
1143 |
* Parameter Number: 0x05 \n
|
|
|
1144 |
* Module Number: Report Module Number \n
|
|
|
1145 |
* Async Bit: OFF \n
|
|
|
1146 |
* Allocate Bit: OFF \n
|
|
|
1147 |
* GET Bit: ON \n
|
|
|
1148 |
* SET Bit: ON \n
|
|
|
1149 |
*/
|
|
|
1150 |
REPORT_OUTPUT_TO_LOGGER_ON = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x06, /**< Report output ON Parameter (Report Module Set/Get Command): \n
|
|
|
1151 |
* Used for setting the output of logs to the logger application\n
|
|
|
1152 |
* Done Sync with no memory allocation\n
|
|
|
1153 |
* Parameter Number: 0x04 \n
|
|
|
1154 |
* Module Number: Report Module Number \n
|
|
|
1155 |
* Async Bit: OFF \n
|
|
|
1156 |
* Allocate Bit: OFF \n
|
|
|
1157 |
* GET Bit: ON \n
|
|
|
1158 |
* SET Bit: ON \n
|
|
|
1159 |
*/
|
|
|
1160 |
|
|
|
1161 |
REPORT_OUTPUT_TO_LOGGER_OFF = SET_BIT | GET_BIT | REPORT_MODULE_PARAM | 0x07,/**< Report output OFF Parameter (Report Module Set/Get Command): \n
|
|
|
1162 |
* Used for setting OFF the output of logs to the logger application\n
|
|
|
1163 |
* Done Sync with no memory allocation\n
|
|
|
1164 |
* Parameter Number: 0x04 \n
|
|
|
1165 |
* Module Number: Report Module Number \n
|
|
|
1166 |
* Async Bit: OFF \n
|
|
|
1167 |
* Allocate Bit: OFF \n
|
|
|
1168 |
* GET Bit: ON \n
|
|
|
1169 |
* SET Bit: ON \n
|
|
|
1170 |
*/
|
|
|
1171 |
|
|
|
1172 |
|
|
|
1173 |
/* TX data section */
|
|
|
1174 |
TX_CTRL_COUNTERS_PARAM = GET_BIT | TX_CTRL_MODULE_PARAM | 0x01 | ALLOC_NEEDED_PARAM, /**< TX Control Counters Parameter (TX Control Module Get Command): \n
|
|
|
1175 |
* Used for getting TX statistics per Tx-queue\n
|
|
|
1176 |
* Done Sync with memory allocation\n
|
|
|
1177 |
* Parameter Number: 0x01 \n
|
|
|
1178 |
* Module Number: TX Control Module Number \n
|
|
|
1179 |
* Async Bit: OFF \n
|
|
|
1180 |
* Allocate Bit: ON \n
|
|
|
1181 |
* GET Bit: ON \n
|
|
|
1182 |
* SET Bit: OFF \n
|
|
|
1183 |
*/
|
|
|
1184 |
TX_CTRL_RESET_COUNTERS_PARAM = SET_BIT | TX_CTRL_MODULE_PARAM | 0x02, /**< TX Control Reset Counters Parameter (TX Control Module Set Command): \n
|
|
|
1185 |
* Used for Reset all TX statistics per Tx-queue\n
|
|
|
1186 |
* Done Sync with no memory allocation\n
|
|
|
1187 |
* Parameter Number: 0x02 \n
|
|
|
1188 |
* Module Number: TX Control Module Number \n
|
|
|
1189 |
* Async Bit: OFF \n
|
|
|
1190 |
* Allocate Bit: OFF \n
|
|
|
1191 |
* GET Bit: OFF \n
|
|
|
1192 |
* SET Bit: ON \n
|
|
|
1193 |
*/
|
|
|
1194 |
TX_CTRL_SET_MEDIUM_USAGE_THRESHOLD = SET_BIT | TX_CTRL_MODULE_PARAM | 0x03, /**< TX Control Set Medum Usage Threshold Parameter (TX Control Module Set Command): \n
|
|
|
1195 |
* Used for setting Medum Usage Threshold of AC\n
|
|
|
1196 |
* Done Sync with no memory allocation\n
|
|
|
1197 |
* Parameter Number: 0x03 \n
|
|
|
1198 |
* Module Number: TX Control Module Number \n
|
|
|
1199 |
* Async Bit: OFF \n
|
|
|
1200 |
* Allocate Bit: OFF \n
|
|
|
1201 |
* GET Bit: OFF \n
|
|
|
1202 |
* SET Bit: ON \n
|
|
|
1203 |
*/
|
|
|
1204 |
|
|
|
1205 |
/* RX data section */
|
|
|
1206 |
RX_DATA_ENABLE_DISABLE_RX_DATA_FILTERS = SET_BIT | GET_BIT | RX_DATA_MODULE_PARAM | 0x04, /**< RX Data Enable/Disable Filters Parameter (RX Data Module Set/Get Command): \n
|
|
|
1207 |
* Used for Enabling/Disabling Filters in FW or getting the Filters Enabling/Disabling current Status\n
|
|
|
1208 |
* Done Sync with no memory allocation\n
|
|
|
1209 |
* Parameter Number: 0x04 \n
|
|
|
1210 |
* Module Number: RX Data Module Number \n
|
|
|
1211 |
* Async Bit: OFF \n
|
|
|
1212 |
* Allocate Bit: OFF \n
|
|
|
1213 |
* GET Bit: ON \n
|
|
|
1214 |
* SET Bit: ON \n
|
|
|
1215 |
*/
|
|
|
1216 |
RX_DATA_ADD_RX_DATA_FILTER = SET_BIT | RX_DATA_MODULE_PARAM | 0x05, /**< RX Data Add Filter Parameter (RX Data Module Set Command): \n
|
|
|
1217 |
* Used for adding RX Data Filter to FW\n
|
|
|
1218 |
* Done Sync with no memory allocation\n
|
|
|
1219 |
* Parameter Number: 0x05 \n
|
|
|
1220 |
* Module Number: RX Data Module Number \n
|
|
|
1221 |
* Async Bit: OFF \n
|
|
|
1222 |
* Allocate Bit: OFF \n
|
|
|
1223 |
* GET Bit: OFF \n
|
|
|
1224 |
* SET Bit: ON \n
|
|
|
1225 |
*/
|
|
|
1226 |
RX_DATA_REMOVE_RX_DATA_FILTER = SET_BIT | RX_DATA_MODULE_PARAM | 0x06, /**< RX Data Remove Filter Parameter (RX Data Module Set Command): \n
|
|
|
1227 |
* Used for removing RX Data Filter from FW\n
|
|
|
1228 |
* Done Sync with no memory allocation\n
|
|
|
1229 |
* Parameter Number: 0x06 \n
|
|
|
1230 |
* Module Number: RX Data Module Number \n
|
|
|
1231 |
* Async Bit: OFF \n
|
|
|
1232 |
* Allocate Bit: OFF \n
|
|
|
1233 |
* GET Bit: OFF \n
|
|
|
1234 |
* SET Bit: ON \n
|
|
|
1235 |
*/
|
|
|
1236 |
RX_DATA_GET_RX_DATA_FILTERS_STATISTICS = GET_BIT | RX_DATA_MODULE_PARAM | 0x07 | ASYNC_PARAM, /**< RX Data Get RX Data Filter Statistics Parameter (RX Data Module Get Command): \n
|
|
|
1237 |
* Used for getting RX Data Filter Statistics from FW\n
|
|
|
1238 |
* Done Async with no memory allocation\n
|
|
|
1239 |
* Parameter Number: 0x07 \n
|
|
|
1240 |
* Module Number: RX Data Module Number \n
|
|
|
1241 |
* Async Bit: ON \n
|
|
|
1242 |
* Allocate Bit: OFF \n
|
|
|
1243 |
* GET Bit: ON \n
|
|
|
1244 |
* SET Bit: OFF \n
|
|
|
1245 |
*/
|
|
|
1246 |
|
|
|
1247 |
|
|
|
1248 |
/* measurement section */
|
|
|
1249 |
MEASUREMENT_ENABLE_DISABLE_PARAM = SET_BIT | MEASUREMENT_MODULE_PARAM | 0x01, /**< Measurement Enable/Disable Parameter (Measurement Module Set Command): \n
|
|
|
1250 |
* Used for Enabling/Disabling Measurement Management Module\n
|
|
|
1251 |
* Done Sync with no memory allocation\n
|
|
|
1252 |
* Parameter Number: 0x01 \n
|
|
|
1253 |
* Module Number: Measurement Module Number \n
|
|
|
1254 |
* Async Bit: OFF \n
|
|
|
1255 |
* Allocate Bit: OFF \n
|
|
|
1256 |
* GET Bit: OFF \n
|
|
|
1257 |
* SET Bit: ON \n
|
|
|
1258 |
*/
|
|
|
1259 |
MEASUREMENT_MAX_DURATION_PARAM = SET_BIT | MEASUREMENT_MODULE_PARAM | 0x02, /**< Measurement Maximum Duration Parameter (Measurement Module Set Command): \n
|
|
|
1260 |
* Used for updating the Maximum Duration on non serving channel\n
|
|
|
1261 |
* Done Sync with no memory allocation\n
|
|
|
1262 |
* Parameter Number: 0x02 \n
|
|
|
1263 |
* Module Number: Measurement Module Number \n
|
|
|
1264 |
* Async Bit: OFF \n
|
|
|
1265 |
* Allocate Bit: OFF \n
|
|
|
1266 |
* GET Bit: OFF \n
|
|
|
1267 |
* SET Bit: ON \n
|
|
|
1268 |
*/
|
|
|
1269 |
|
|
|
1270 |
/* XCC */
|
|
|
1271 |
XCC_CONFIGURATION = SET_BIT | GET_BIT | XCC_MANAGER_MODULE_PARAM | 0x01, /**< XCC Manager Configuration Parameter (XCC Manager Module Set/Get Command): \n
|
|
|
1272 |
* Used for setting or getting XCC configuration (RogueAP, CCKM, CKIP, All)\n
|
|
|
1273 |
* Done Sync with no memory allocation\n
|
|
|
1274 |
* Parameter Number: 0x01 \n
|
|
|
1275 |
* Module Number: XCC Manager Module Number \n
|
|
|
1276 |
* Async Bit: OFF \n
|
|
|
1277 |
* Allocate Bit: OFF \n
|
|
|
1278 |
* GET Bit: ON \n
|
|
|
1279 |
* SET Bit: ON \n
|
|
|
1280 |
*/
|
|
|
1281 |
|
|
|
1282 |
/* MISC section */
|
|
|
1283 |
DEBUG_ACTIVATE_FUNCTION = SET_BIT | MISC_MODULE_PARAM | 0x03, /**< Debug Activate Function Parameter (MISC Module Set Command): \n
|
|
|
1284 |
* Used for performing debug function\n
|
|
|
1285 |
* Done Sync with no memory allocation\n
|
|
|
1286 |
* Parameter Number: 0x03 \n
|
|
|
1287 |
* Module Number: MISC Module Number \n
|
|
|
1288 |
* Async Bit: OFF \n
|
|
|
1289 |
* Allocate Bit: OFF \n
|
|
|
1290 |
* GET Bit: OFF \n
|
|
|
1291 |
* SET Bit: ON \n
|
|
|
1292 |
*/
|
|
|
1293 |
|
|
|
1294 |
/* Health Monitoring section */
|
|
|
1295 |
HEALTH_MONITOR_CHECK_DEVICE = SET_BIT | HEALTH_MONITOR_MODULE_PARAM | 0x01, /**< Health Monitoring Check Device Parameter (Health Monitoring Module Set Command): \n
|
|
|
1296 |
* Used for sending health check command to FW\n
|
|
|
1297 |
* Done Sync with no memory allocation\n
|
|
|
1298 |
* Parameter Number: 0x01 \n
|
|
|
1299 |
* Module Number: Health Monitoring Module Number \n
|
|
|
1300 |
* Async Bit: OFF \n
|
|
|
1301 |
* Allocate Bit: OFF \n
|
|
|
1302 |
* GET Bit: OFF \n
|
|
|
1303 |
* SET Bit: ON \n
|
|
|
1304 |
*/
|
|
|
1305 |
|
|
|
1306 |
LAST_CMD = 0x00 /**< Last External Parameter - Dummy, Should always stay Last */
|
|
|
1307 |
|
|
|
1308 |
} EExternalParam;
|
|
|
1309 |
|
|
|
1310 |
/* functions */
|
|
|
1311 |
/*************/
|
|
|
1312 |
|
|
|
1313 |
#endif /* _CMD_INTERFACE_CODES_H_ */
|
|
|
1314 |
|