FCL/sf/app/contacts: phonebookengines/contactsmodel/tsrc/Integration/CntPerfTest/Scripts/TestContactViewSuite.Script@0ba2181d7c28

//
// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).
// All rights reserved.
// This component and the accompanying materials are made available
// under the terms of "Eclipse Public License v1.0"
// which accompanies this distribution, and is available
// at the URL "http://www.eclipse.org/legal/epl-v10.html".
//
// Initial Contributors:
// Nokia Corporation - initial contribution.
//
// Contributors:
//
// Description:
//
//! @file
//! @SYMTestSuiteName TestContactViewSuite
//! @SYMScriptTestEnvironment

PRINT Run all TestContactView tests

LOAD_SUITE CntPerfTestServer

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0035-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0035-HP
//! @SYMTestCaseDesc Impact of SyncML operations on Contact views
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct multiple contact views.
//! 2. Initiate a contact import operation.
//! 3. Access the contact views as per 3.1.2.
//! 4. Validate the contact view access results i.e. it is perfectly valid if the contact
//! view access fails with KErrNotFound if the contact item doesn’t exist in the view, But there
//! should not be any invalid error codes or panics as a result of contact view access when a syncml
//! operation is initiated in parallel.
//! @SYMTestExpectedResults SyncML operations doesn’t affect contact view operations
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews35
CONCURRENT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews35_1
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews35_2

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0035-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0002-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0002-HP
//! @SYMTestCaseDesc Construct contact views with different view sort order.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Add contacts in the contacts database.
//! 2. Construct a contact view.
//! 3. During view construction, supply the desired view preference and sort order.
//! 4. Validate the contact views related notifications or events are as per expectations.
//! 5. Validate that the newly constructed view contains the desired view preference and sort order i.e. check that the contact ids in the view are as per the desired sort order. And the contact items in the view meet the desired view preferences.
//! 6. Repeat the above mentioned steps for different view sort order. Refer to 1.2.2.1 for information on contact view sort order
//! @SYMTestExpectedResults It is possible to construct contact views with different view sort order.
//! @SYMTestType CIT

CONSECUTIVE

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_2
END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0002-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0003-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0003-HP
//! @SYMTestCaseDesc contacts view with different contact view preferences
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Add contacts in the contacts database.
//! 2. Construct a contact view.
//! 3. During view construction, supply the desired view preference and sort order.
//! 4. Access the view as per 4.1.1.1.
//! 5. Validate that the newly constructed view possess the desired view preference and sort order
//! i.e. check that the contact ids in the view are as per the desired sort order. And the contact items in the view
//! are as per the desired view preferences.
//! 6. Repeat the above mentioned steps for different view preferences. Refer to 1.2.2.2 for information on view preferences.
//! @SYMTestExpectedResults It is possible to construct contact views with different view preferences.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini createviews2
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews3

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0003-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0007-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0007-HP
//! @SYMTestCaseDesc Construction of a Named Remote view with desired Sort Plug-In
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a named remote view.
//! 2.Specify the desired contacts view preference and sort order.
//! 3.Specify the desired Sort Plugin.
//! 4.Validate the contacts view preference and sort order after the successful completion of the view.
//! 5.Validate that the view elements are sorted as per the desired sort plug-in i.e. check that the contact ids in the view are as per the sort plug-in criteria.
//! @SYMTestExpectedResults It is possible to construct contacts named remote view with a user defined sort plugin
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_7
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini namedremoteviewwithplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0007-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0008-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0008-HP
//! @SYMTestCaseDesc Test the contacts find view for basic view operations.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a find view over an existing local view.
//! 2.Specify the desired search criteria as part of construction.
//! 3.Validate that the view elements meet the search criteria by checking the any of the contact item field contents of the contacts in the view possess the desired search string.
//! @SYMTestExpectedResults It is possible construct and access a contacts find view.
//! @SYMTestType CIT
END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0008-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0010-HP-0001
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0010-HP-0001
//! @SYMTestCaseDesc Update a find view indirectly and access the same
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a find view over an existing local view.
//! 2.Validate that the find view elements meet the search criteria.
//! 3.Modify the underlying Local view.
//! 4.Validate that the updated contact find view items still meets the find criteria i.e. validate that the view elements meet the desired search criteria by checking the any of the contact item field contents of the contacts in the view possess the desired string.
//! @SYMTestExpectedResults The find view is still accessible and updated correctly, even though the underlying view is modified.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_8
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini findviewonlocalview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0010-HP-0001

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0009-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0009-HP
//! @SYMTestCaseDesc Refine the search criteria of a find view and access the same
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Perform test case APPENG-CONTACTS-VIEWS-I-0008-HP.
//! 2.Refine the search criteria.
//! 3.Validate that the updated contact view items meet the find criteria i.e. Validate that the view elements meet the updated search criteria by checking the any of the contact item field contents of the contacts in the view possess the updated desired string.
//! @SYMTestExpectedResults It is possible to perform construct a contacts local or remote and named local view sorted as per user defined sort plug-in
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_9
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini refinefindview9

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0009-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0011-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0011-HP
//! @SYMTestCaseDesc Test the contacts find view built on an underlying remote view for basic view operations.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a find view over an existing remote view.
//! 2.Carry out operation specified in APPENG-CONTACTS-VIEWS-I-0001-HP.
//! 3.Validate that the view elements meet the desired search criteria by checking the any of the contact item field contents of the contacts in the view possess the desired string.
//! @SYMTestExpectedResults It is possible to construct and perform basic contacts view related operations on find view based on underlying remote view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_11
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini findviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0011-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0012-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0012-HP
//! @SYMTestCaseDesc Refine the search criteria of a find view based on existing remote view and access the same.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Perform test case APPENG-CONTACTS-VIEWS-I-0011-HP.
//! 2.Refine the search criteria and validate the view elements again.
//! 3.Validate that the updated contact view items meet the find criteria i.e. Validate that the view elements meet the updated search criteria by checking the any of the contact item field contents of the contacts in the view, to possess the updated desired string
//! @SYMTestExpectedResults It is possible to refine the search criteria of Find view based on an existing remote view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_12
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini refinefindviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0012-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0014-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0014-HP
//! @SYMTestCaseDesc OOM tests for the Find View
//! @SYMFssID
//! @SYMREQ
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Run all find view related tests listed under 3.2.1 to 3.2.6 under OOM conditions.
//! @SYMTestExpectedResults Under OOM conditions, Find view related operations leave with KErrNoMemory.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_14
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews_14

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0014-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0015-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0015-HP
//! @SYMTestCaseDesc Create a Filtered view and access the same
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a Filtered view over a existing local view by specifying a valid contact view filter criteria
//! 2.Carry out the basic operations specified in APPENG-CONTACTS-VIEWS –I-0001-HP.
//! 3.Validate that the contact items in the view meet the view filter criteria i.e. check that the view contacts contains the desired view filter.
//! @SYMTestExpectedResults It is possible to create a filtered view and carry out basic view operations.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_15
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createfilteredview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0015-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0017-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0017-HP
//! @SYMTestCaseDesc Create a filtered view over an existing remote view and access the same
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a Filtered view on the existing remote view by specifying valid filter criteria
//! 2.Carry out the basic operations specified in APPENG-CONTACTS-VIEWS –I-0001-HP.
//! 3.Validate that the contact items in the view meet the view filter criteria i.e. check that the view contacts contains the desired view filter.
//! @SYMTestExpectedResults It is possible to create a filtered view and access the same.
//! @SYMTestType CIT

RUN_TEST_STEP 600 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_17
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createfilteredviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0017-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0019-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0019-HP
//! @SYMTestCaseDesc OOM tests for the Filtered View
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Run all filtered view related tests listed under 3.3.1 to 3.3.4 under OOM Conditions.
//! @SYMTestExpectedResults Under OOM conditions, Find view related operations leave with KErrNoMemory.
//! @SYMTestType CIT

RUN_TEST_STEP 600 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_19
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews_19

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0019-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0020-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0020-HP
//! @SYMTestCaseDesc Create and access a group view over an existing local view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a Group view over an existing local view by specifying valid Group type criteria.
//! 2.Carry out the basic view operations specified in APPENG-CONTACTS-VIEWS –I-0001-HP.
//! 3.Validate that the contact items in the group view meet the group type criteria i.e. check that the view contacts are of desired group type.
//! @SYMTestExpectedResults It is possible to create a group view over an existing local view and carry out basic view operations
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_20
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini creategroupview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0020-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0022-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0022-HP
//! @SYMTestCaseDesc Create and access a group view over an existing remote view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a group view on a existing remote view by specifying a valid group type criteria
//! 2.Carry out the basic operations specified in APPENG-CONTACTS-VIEWS-I-0001-HP.
//! 3.Validate that the contact items in the group view meet the group type criteria.
//! @SYMTestExpectedResults It is possible to create and access a group view built over an existing remote view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_22
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini creategroupviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0022-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0024-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0024-HP
//! @SYMTestCaseDesc OOM tests for the Group View
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Run all group view related tests listed under 3.3.1 to 3.3.4 under OOM Conditions.
//! @SYMTestExpectedResults Under OOM conditions, group view related operations leave with KErrNoMemory
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_24
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews7

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0024-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0025-HP-0001
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0025-HP-0001
//! @SYMTestCaseDesc Create and access a sub view
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a Sub view on the existing local view by specifying valid boundary conditions.
//! 2.Carry out the basic view operations specified in APPENG-CONTACTS-VIEWS-I-0001-HP.
//! 3.Validate that the contact items in the group view meet the boundary criteria.
//! @SYMTestExpectedResults It is possible to create and access a sub view
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_25
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createsubviewonlocalview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0025-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0027-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0027-HP
//! @SYMTestCaseDesc Create and access a sub view based on existing remote view
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a Sub view on the existing remote view by specifying a valid boundary
//! 2.Validate the view elements.
//! @SYMTestExpectedResults It is possible to construct and access a sub view over a remote view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_27
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createsubviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0027-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0029-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0029-HP
//! @SYMTestCaseDesc OOM tests for the Sub View
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Run all sub view related tests listed under 3.3.1 to 3.3.4 under OOM Conditions.
//! @SYMTestExpectedResults Under OOM conditions, sub view related operations leave with KErrNoMemory
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_29
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews_29

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0029-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0030-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0030-HP
//! @SYMTestCaseDesc Construct a Concatenated view
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a Concatenated view over multiple existing views.
//! 2. verify and validate whether the concatenated view is constructed properly
//! @SYMTestExpectedResults View is constructed successfuly
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_30
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini concatenatedview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0030-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0031-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0031-HP
//! @SYMTestCaseDesc User defined sort plug-in
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a Contact local or remote and named local view.
//! 2. During view construction, specify a user-defined sort plug-in
//! 3. Validate that the view is sorted as per the user defined sort plug-in by checking the order of the contact-ids in the view i.e. the indices of the contact ids in the view must meet the sort plug-in criteria.
//! @SYMTestExpectedResults It is possible to perform construct a contacts local or remote and named local view sorted as per user defined sort plug-in
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithuserdefinesortplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0031-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0032-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0032-HP
//! @SYMTestCaseDesc Default sort plug-in not available
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a Contacts local view or remote view or named remote view.
//! 2. During view construction, don’t specify any sort plug-in.
//! 3. At the same time, the default sort plug-must not be available.
//! 4. Validate that the view is sorted by checking the order of the contact-ids in the view
//! i.e. the indices of the contact ids in the view must be sorted using CContactViewBase::CompareFieldsL()
//! which uses TDesC::CompareC().
//! @SYMTestExpectedResults It is possible to construct a contacts local view or remote view or named local view,
//! when the default sort plug-in is unavailable.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithdefaultsortplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0032-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0033-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0033-HP
//! @SYMTestCaseDesc Empty descriptor as sort plug-in
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a Contact local or remote or named remote view.
//! 2. During view construction, specify a Null Descriptor as sort plug-in name.
//! 3. Validate that the view is sorted by checking the order of the contact-ids in the view i.e.
//! the indices of the contact ids in the view must meet the built-in sort criteria which is based on
//! TDesC::CompareC() behaviour.
//! @SYMTestExpectedResults It is possible to construct a contact local or remote or named remote view by specifying an empty descriptor as the sort plug-in name.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithemptysortplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0033-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0034-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0034-HP
//! @SYMTestCaseDesc Default sort plug-in not available
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a Contacts local view or remote view or named remote view.
//! 2. During view construction, don’t specify any sort plug-in.
//! 3. At the same time, the default sort plug-must not be available.
//! 4. Validate that the view is sorted by checking the order of the contact-ids in the view
//! i.e. the indices of the contact ids in the view must be sorted using CContactViewBase::CompareFieldsL()
//! which uses TDesC::CompareC().
//! @SYMTestExpectedResults It is possible to construct a contacts local view or remote view or named local view,
//! when the default sort plug-in is unavailable.
//! @SYMTestType CIT

RUN_TEST_STEP !Error=-1 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithinvalidplugin
END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0034-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0036-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0036-HP
//! @SYMTestCaseDesc Contact views operation under low disk conditions
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct multiple contact views.
//! 2. Set the file system to throw KErrDiskFull using RFs::SetErrorCondition API.
//! 3. Access the contact views as per 3.1.2.
//! 4. Validate the contact view access results i.e. it is perfectly valid if the contact
//! view access which further requires disk access fails with KErrDiskFull, But there should not
//! be any invalid error codes or panics as a result of contact view access under low disk conditions.
//! @SYMTestExpectedResults Contact View access that involves disk access should fail none other than KErrDiskFull error
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini lowdiskcondition

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0036-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0037-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0037-HP
//! @SYMTestCaseDesc Test contact view operations with media not in place.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct multiple contact views.
//! 2.Set the file system to throw KErrNotReady using RFs::SetErrorCondition API.
//! 3.Access the contact views as per 4.1.1.1.
//! 4.Validate the contact view access results i.e. it is perfectly valid if the contact view access which requires disk access fails with KErrNotReady, but there should not be any invalid error codes or panics as a result of contact view access when the media is not present.
//! @SYMTestExpectedResults Contact View access that involves disk access should fail with none other than KErrNotReady error, when the media doesn’t exist.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini disknotreadycondition

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0037-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0038-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0038-HP
//! @SYMTestCaseDesc Multiple views over a local view
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct at least 5 dependent contact views over an existing local view.
//! 2.These dependent views can be any of the following - group view, sub view, concatenated view, filtered view, find view
//! 3.Validate the contact view count
//! @SYMTestExpectedResults It is possible to have multiple views over a local view and access them.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_38
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini multipleviewonlocalview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0038-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0039-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0039-HP
//! @SYMTestCaseDesc Multiple views over an existing remote view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct at least 5 dependent contact views over an existing remote view.
//! 2.These dependent views can be any of the following - group view, sub view, concatenated view, filtered view, find view.
//! 3.Validate the contact view count
//! @SYMTestExpectedResults It is possible to have multiple views over a remote view and access them.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_39
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini multipleviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0039-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0040-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0040-HP
//! @SYMTestCaseDesc Allocate concurrent views and access the same
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Launch concurrent threads and construct all possible contact views in each individual thread.
//! 2.Perform view and database related operations simultaneously in each thread.
//! 3.Validate the results
//! @SYMTestExpectedResults It should be possible to access multiple views in multiple threads concurrently.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_39

CONCURRENT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini concurrentviewsaccess1
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini concurrentviewsaccess2
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini concurrentviewsaccess3

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0040-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0043-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0043-HP
//! @SYMTestCaseDesc Pass valid index in the API and find all the fields of a contact item in the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a local view or group view or find view or filtered view or sub View.
//! 2.After the view is constructed, find all the fields of the contact item in the view by passing the valid index in the API AllFieldsLC().
//! 3.Verify if they are returned correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults All the fields of the contact item in the view are returned correctly
//! @SYMTestType CIT

CONSECUTIVE

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_43
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini findallfieldsincontact

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0043-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0044-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0044-HP
//! @SYMTestCaseDesc Pass invalid index and find all the fields in the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a local view or group view or find view or filtered view or Sub view.
//! 2. After the view is constructed, Call the API AllFieldsLC() by passing the invalid index.
//! @SYMTestExpectedResults The API leaves with error code KErrNotFound.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_43
RUN_TEST_STEP !Error=-1 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews11

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0044-HP

//this test case should only run for urel mode

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0045-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0045-HP
//! @SYMTestCaseDesc Create a sub view and find all the fields of the contact item in the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View. During construction, don’t specify the upper and lower boundaries.
//! 2.After the view is constructed, find all the fields of the contact item by passing the valid index in the API AllFieldsLC().
//! @SYMTestExpectedResults Fields are not returned instead a NULL descriptor is returned for urel builds and panic occurs for udeb builds.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_25
RUN_TEST_STEP !Result=Fail 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini findallfieldsinsubview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0045-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0046-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0046-HP
//! @SYMTestCaseDesc Create any view and retrieve the contact item id present in the particular index of the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, get the contact item Id in the view by passing the valid index in the API AtL().
//! 3.Verify if the contact item id is retrieved correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults Contact item id in the view is retrieved correctly.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini getvalidcontactid

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0046-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0047-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0047-HP
//! @SYMTestCaseDesc Create any view and retrieve the contact item id present in the particular index of the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, Call the API AtL() by passing the invalid index.
//! @SYMTestExpectedResults The AtL () API leaves with error code KErrNotFound if the index is out of bounds or invalid.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_8
RUN_TEST_STEP !Error=-1 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini getinvalidcontactid

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0047-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0048-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0048-HP
//! @SYMTestCaseDesc Create any view and retrieve the contact item present in the particular index of the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, Get the contact item in the view by passing the valid index in the API ContactAtL().
//! 3.Verify whether the contact item is retrieved correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults The contact item is retrieved correctly.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini getvalidcontactitem

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0048-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0049-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0049-HP
//! @SYMTestCaseDesc Create any view and retrieve the contact item present in the particular index of the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, Call the API ContactAtL () by passing the valid index.
//! @SYMTestExpectedResults The API leaves with error code KErrNotFound if the index is out of bounds or invalid.
//! @SYMTestType CIT

RUN_TEST_STEP !Error=-1 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini getcontactatinvalidindex

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0049-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0050-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0050-HP
//! @SYMTestCaseDesc Get the number of contact items id present in the view.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, get the number of contact item ids present in the view.
//! 3.Verify whether the numbers of contacts returned are correct by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults The numbers of contact item ids are returned correctly from the view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_8
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini getnumberofcontactid

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0050-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0051-HP-0001
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0051-HP-0001
//! @SYMTestCaseDesc Pass the valid contact item Id and find the index of the contact item id in the view
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, Find the index of the contact item in the view by passing the valid contact item id in the API FindL().
//! 3.Verify if the index is retrieved correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults The index of the contact item Id is retrieved correctly.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini gettheindexofcontactid

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0051-HP-0001

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0052-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0052-HP
//! @SYMTestCaseDesc Pass the invalid contact item Id and find the index of the contact item id in the view
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a sub View or find view or group view or filtered view or concatenated view.
//! 2.After the view is constructed, Call the API FindL() by passing the invalid contact item id.
//! @SYMTestExpectedResults The API will leave with error code KErrNotFound if an invalid contact item id is passed.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini gettheindexofinvalidcontactid

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0052-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0053-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0053-HP
//! @SYMTestCaseDesc Refine the find view criteria by appending some characters along with the search character used during construction.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a find view by passing a search string.
//! 2. After the view is constructed, refine the find view by appending some more characters
//! along with the search string that was used during construction.
//! 3. Verify whether the find view is refined by retrieving the contact item and comparing it with
//! the expected result that is passed from the ini file.
//! @SYMTestExpectedResults We should be able to refine the find view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_53
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini refinefindview_53

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0053-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0054-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0054-HP
//! @SYMTestCaseDesc Refine the find view criteria with entirely new characters in the search criteria
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a find view by specifying the search string.
//! 2. After the view is constructed, refine the find view by entirely replacing the search
//! string with the new string.
//! 3. Verify whether the find view is refined by retrieving the contact item and comparing it
//! with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults We should be able to refine the find view.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_54
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini refinefindview_54

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0054-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0055-HP-0001
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0055-HP-0001
//! @SYMTestCaseDesc Get the underlying views sort order
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a find view or local view or group view or filtered view or concatenated view or sub view.
//! 2.After the view is constructed, get the underlying view’s sort order.
//! 3.Verify whether the sort order is retrieved correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults The sort order of the view is retrieved correctly.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_2
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini getsortorder

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0055-HP-0001

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0056-HP-0001
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0056-HP-0001
//! @SYMTestCaseDesc Get the contact view preferences
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a find view or local view or group view or filtered view or concatenated view or sub view.
//! 2.After the view is constructed, get the contact view preferences.
//! 3.Verify whether the contact view preference is retrieved correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults The contact view’s preference is retrieved correctly.
//! @SYMTestType CIT

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0056-HP-0001

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0057-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0057-HP
//! @SYMTestCaseDesc Construct a filter view and get the contacts matching the criteria.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a filter view.
//! 2. After the view is constructed, retrieve the contacts matching the specified search string.
//! 3. Verify whether the contacts are retrieved correctly by comparing it with the expected
//! result that is passed from the ini file.
//! @SYMTestExpectedResults The contacts matching the specified search string are retrieved correctly.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_57
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews57

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0057-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0058-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0058-HP
//! @SYMTestCaseDesc Construct a filter view and get the contacts matching the prefix
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a filter view.
//! 2. After the view is constructed, retrieve the contacts where the prefix is matching with
//! the specified search string.
//! 3. Verify whether the contacts are retrieved correctly by comparing it with the expected result
//! that is passed from the ini file.
//! @SYMTestExpectedResults The contacts matching the prefix are retrieved correctly
//! @SYMTestType CIT

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0058-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0059-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0059-HP
//! @SYMTestCaseDesc Construct a filter view and get the contacts matching the prefix
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a filter view.
//! 2.After the view is constructed, Call the API ContactsMatchingPrefixL() where the search string does not match the prefix of the contact.
//! 3.Verify whether the contacts are retrieved correctly by comparing it with the expected result that is passed from the ini file.
//! @SYMTestExpectedResults The contacts are not retrieved where the search string is not matching with the prefix.
//! @SYMTestType CIT

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0059-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0060-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0060-HP
//! @SYMTestCaseDesc Test the View API’s before the view is ready
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1. Construct a local view or group view or find view or filtered view or sub view or concatenated view.
//! 2. Before the view is constructed i.e before the view gets ready, call the API’s FindL, AtL,
//! ContactAtL and AllFieldsLC.
//! 3. Verify if these API’s leave with proper error code.
//! @SYMTestExpectedResults All the API’s leave with error code KErrNotReady
//! @SYMTestType CIT

RUN_TEST_STEP !Error=-18 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews60

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0060-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0061-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0061-HP
//! @SYMTestCaseDesc Construct any view where there are no contacts for the preferences specified in the API construction.
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Construct a local view or group view or find view or filtered view or sub view or concatenated view.
//! 2.After the view is constructed, get the number of contact items by calling the API countL().
//! @SYMTestExpectedResults The countL() API returns zero as there are no contacts matching the preferences.
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviewwithinvalidpref

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0061-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0062-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0062-HP
//! @SYMTestCaseDesc Test view sort during Start-Up
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Add more than thousand contacts in the database i.e. contacts in the database must be in the order of 10000,3000 …. 5000.
//! 2.Construct a local or remote or named remote view.
//! 3.Specify the view preferences and the view sort order such that all the contacts in the database meet the criteria.
//! 4.Check that the contact view elements are in expected sort order by validating that contacts view item indices are in the expected order, specified in the ini file.
//! @SYMTestExpectedResults The contact view elements are sorted as per expected order
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_62
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini mergesortorder

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0062-HP

START_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0063-HP
//! @SYMTestCaseID PIM-APPENG-CONTACTS-VIEWS-I-0063-HP
//! @SYMTestCaseDesc Test view sort during resort
//! @SYMPREQ 1187
//! @SYMTestStatus Implemented
//! @SYMTestPriority High
//! @SYMTestActions 1.Add more than thousand contacts in the database i.e. contacts in the database must be in the order of 10000,3000 …. 5000.
//! 2.Construct a named remote view.
//! 3.Specify the view preferences and the view sort order such that all the contacts in the database meet the criteria.
//! 4.Check that the contact view elements are in expected sort order by validating that contacts view item indices are in the expected order, specified in the ini file.
//! 5.Now change the sort order using ChangeSortOrderL() Api
//! 6.Check that the updated contact view elements are in expected sort order by validating that contacts view item indices are in the expected order, specified in the ini file.
//! @SYMTestExpectedResults The contact view elements are sorted as per expected order
//! @SYMTestType CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_63
RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini sortorderduringresort

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0063-HP

PRINT Completed TestCalInterimApi_Tests

author	Dremov Kirill (Nokia-D-MSW/Tampere) <kirill.dremov@nokia.com>
	Fri, 19 Mar 2010 09:27:18 +0200
changeset 24	0ba2181d7c28
parent 0	e686773b3f54
permissions	-rw-r--r--