//

// Copyright (c) 2009 Nokia Corporation and/or its subsidiary(-ies).

// All rights reserved.

// This component and the accompanying materials are made available

// under the terms of "Eclipse Public License v1.0"

// which accompanies this distribution, and is available

// at the URL "http://www.eclipse.org/legal/epl-v10.html".

//

// Initial Contributors:

// Nokia Corporation - initial contribution.

//

// Contributors:

//

//

//! @file

//! @SYMTestSuiteName	TestContactViewSuite

//! @SYMScriptTestEnvironment

PRINT Run all TestContactView tests

LOAD_SUITE CntPerfTestServer

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0035-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0035-HP

//! @SYMTestCaseDesc 		Impact of SyncML operations on Contact views

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct multiple contact views.

//!				2. Initiate a contact import operation.

//!				3. Access the contact views as per 3.1.2.

//!				4. Validate the contact view access results i.e. it is perfectly valid if the contact 

//!				view access fails with KErrNotFound if the contact item doesn’t exist in the view, But there 

//!				should not be any invalid error codes or panics as a result of contact view access when a syncml 

//!				operation is initiated in parallel. 

//! @SYMTestExpectedResults 	SyncML operations doesn’t affect contact view operations

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews35 

CONCURRENT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews35_1 

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews35_2

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0035-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0002-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0002-HP

//! @SYMTestCaseDesc 		Construct contact views with different view sort order.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Add contacts in the contacts database.

//!				2. Construct a contact view.

//!				3. During view construction, supply the desired view preference and sort order.

//!				4. Validate the contact views related notifications or events are as per expectations.

//!				5. Validate that the newly constructed view contains the desired view preference and sort order i.e. check that the contact ids in the view are as per the desired sort order. And the contact items in the view meet the desired view preferences.

//!				6. Repeat the above mentioned steps for different view sort order. Refer to 1.2.2.1 for information on contact view sort order

//! @SYMTestExpectedResults 	It is possible to construct contact views with different view sort order.

//! @SYMTestType 		CIT

CONSECUTIVE

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_2

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0002-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0003-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0003-HP

//! @SYMTestCaseDesc 		contacts view with different contact view preferences

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Add contacts in the contacts database.

//!				2. Construct a contact view.

//!				3. During view construction, supply the desired view preference and sort order.				

//!				4. Access the view as per 4.1.1.1.

//!				5. Validate that the newly constructed view possess the desired view preference and sort order 

//!				i.e. check that the contact ids in the view are as per the desired sort order. And the contact items in the view

//!				are as per the desired view preferences.

//!				6. Repeat the above mentioned steps for different view preferences. Refer to 1.2.2.2 for information on view preferences.

//! @SYMTestExpectedResults 	It is possible to construct contact views with different view preferences.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini createviews2

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews3

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0003-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0007-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0007-HP

//! @SYMTestCaseDesc 		Construction of a Named Remote view with desired Sort Plug-In

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a named remote view.

//!				2.Specify the desired contacts view preference and sort order.

//!				3.Specify the desired Sort Plugin.

//!				4.Validate the contacts view preference and sort order after the successful completion of the view.

//!				5.Validate that the view elements are sorted as per the desired sort plug-in i.e. check that the contact ids in the view are as per the sort plug-in criteria.

//! @SYMTestExpectedResults 	It is possible to construct contacts named remote view with a user defined sort plugin

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_7

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini namedremoteviewwithplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0007-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0008-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0008-HP

//! @SYMTestCaseDesc 		Test the contacts find view for basic view operations.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a find view over an existing local view.

//!				2.Specify the desired search criteria as part of construction.				

//!				3.Validate that the view elements meet the search criteria by checking the any of the contact item field contents of the contacts in the view possess the desired search string.

//! @SYMTestExpectedResults 	It is possible construct and access a contacts find view.

//! @SYMTestType 		CIT

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0008-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0010-HP-0001

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0010-HP-0001

//! @SYMTestCaseDesc 		Update a find view indirectly and access the same

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a find view over an existing local view.

//!				2.Validate that the find view elements meet the search criteria.

//!				3.Modify the underlying Local view.

//!				4.Validate that the updated contact find view items still meets the find criteria i.e. validate that the view elements meet the desired search criteria by checking the any of the contact item field contents of the contacts in the view possess the desired string.

//! @SYMTestExpectedResults 	The find view is still accessible and updated correctly, even though the underlying view is modified. 

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_8

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini findviewonlocalview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0010-HP-0001

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0009-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0009-HP

//! @SYMTestCaseDesc 		Refine the search criteria of a find view and access the same

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Perform test case APPENG-CONTACTS-VIEWS-I-0008-HP.

//!				2.Refine the search criteria. 

//!				3.Validate that the updated contact view items meet the find criteria i.e. Validate that the view elements meet the updated search criteria by checking the any of the contact item field contents of the contacts in the view possess the updated desired string.

//! @SYMTestExpectedResults 	It is possible to perform construct a contacts local or remote and named local view sorted as per user defined sort plug-in

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_9

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini refinefindview9

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0009-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0011-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0011-HP

//! @SYMTestCaseDesc 		Test the contacts find view built on an underlying remote view for basic view operations.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a find view over an existing remote view.

//!				2.Carry out operation specified in APPENG-CONTACTS-VIEWS-I-0001-HP.

//!				3.Validate that the view elements meet the desired search criteria by checking the any of the contact item field contents of the contacts in the view possess the desired string.

//! @SYMTestExpectedResults 	It is possible to construct and perform basic contacts view related operations on find view based on underlying remote view.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_11

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini findviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0011-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0012-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0012-HP

//! @SYMTestCaseDesc 		Refine the search criteria of a find view based on existing remote view and access the same.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Perform test case APPENG-CONTACTS-VIEWS-I-0011-HP.

//!				2.Refine the search criteria and validate the view elements again.

//!				3.Validate that the updated contact view items meet the find criteria i.e. Validate that the view elements meet the updated search criteria by checking the any of the contact item field contents of the contacts in the view, to possess the updated desired string

//! @SYMTestExpectedResults 	It is possible to refine the search criteria of Find view based on an existing remote view.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_12

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini refinefindviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0012-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0014-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0014-HP

//! @SYMTestCaseDesc 		OOM tests for the Find View

//! @SYMFssID			

//! @SYMREQ				

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Run all find view related tests listed under 3.2.1 to 3.2.6 under OOM conditions.

//! @SYMTestExpectedResults 	Under OOM conditions, Find view related operations leave with KErrNoMemory.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_14

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews_14

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0014-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0015-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0015-HP

//! @SYMTestCaseDesc 		Create a Filtered view and access the same

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a Filtered view over a existing local view by specifying a valid  contact view filter criteria 

//!				2.Carry out the basic operations specified in APPENG-CONTACTS-VIEWS –I-0001-HP.

//!				3.Validate that the contact items in the view meet the view filter criteria i.e. check that the view contacts contains the desired view filter.

//! @SYMTestExpectedResults 	It is possible to create a filtered view and carry out basic view operations.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_15

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createfilteredview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0015-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0017-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0017-HP

//! @SYMTestCaseDesc 		Create a filtered view over an existing remote view and access the same

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a Filtered view on the existing remote view by specifying valid filter criteria 

//!				2.Carry out the basic operations specified in APPENG-CONTACTS-VIEWS –I-0001-HP.

//!				3.Validate that the contact items in the view meet the view filter criteria i.e. check that the view contacts contains the desired view filter.

//! @SYMTestExpectedResults 	It is possible to create a filtered view and access the same.

//! @SYMTestType 		CIT

RUN_TEST_STEP 600 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_17

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createfilteredviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0017-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0019-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0019-HP

//! @SYMTestCaseDesc 		OOM tests for the Filtered View

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Run all filtered view related tests listed under 3.3.1 to 3.3.4 under OOM Conditions.

//! @SYMTestExpectedResults 	Under OOM conditions, Find view related operations  leave with KErrNoMemory.

//! @SYMTestType 		CIT

RUN_TEST_STEP 600 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_19

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews_19

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0019-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0020-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0020-HP

//! @SYMTestCaseDesc 		Create and access a group view over an existing local view.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a Group view over an existing local view by specifying valid Group type criteria.

//!				2.Carry out the basic view operations specified in APPENG-CONTACTS-VIEWS –I-0001-HP.

//!				3.Validate that the contact items in the group view meet the group type criteria i.e. check that the view contacts are of desired group type.

//! @SYMTestExpectedResults 	It is possible to create a group view over an existing local view and carry out basic view operations

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_20

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini creategroupview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0020-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0022-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0022-HP

//! @SYMTestCaseDesc 		Create and access a group view over an existing remote view.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a group view on a existing remote view by specifying a valid group type criteria 

//!				2.Carry out the basic operations specified in APPENG-CONTACTS-VIEWS-I-0001-HP.

//!				3.Validate that the contact items in the group view meet the group type criteria.

//! @SYMTestExpectedResults 	It is possible to create and access a group view built over an existing remote view.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_22

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini creategroupviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0022-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0024-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0024-HP

//! @SYMTestCaseDesc 		OOM tests for the Group View

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Run all group view related tests listed under 3.3.1 to 3.3.4 under OOM Conditions.

//! @SYMTestExpectedResults 	Under OOM conditions, group view related operations leave with KErrNoMemory

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_24

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews7

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0024-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0025-HP-0001

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0025-HP-0001

//! @SYMTestCaseDesc 		Create and access a sub view

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a Sub view on the existing local view by specifying valid boundary conditions.

//!				2.Carry out the basic view operations specified in APPENG-CONTACTS-VIEWS-I-0001-HP.

//!				3.Validate that the contact items in the group view meet the boundary criteria.

//! @SYMTestExpectedResults 	It is possible to create and access a sub view

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_25

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createsubviewonlocalview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0025-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0027-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0027-HP

//! @SYMTestCaseDesc 		Create and access a sub view based on existing remote view

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct a Sub view on the existing remote view by specifying a valid boundary 

//!				2.Validate the view elements.

//! @SYMTestExpectedResults 	It is possible to construct and access a sub view over a remote view.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_27

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createsubviewonremoteview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0027-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0029-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0029-HP

//! @SYMTestCaseDesc 		OOM tests for the Sub View

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Run all sub view related tests listed under 3.3.1 to 3.3.4 under OOM Conditions.

//! @SYMTestExpectedResults 	Under OOM conditions, sub view related operations leave with KErrNoMemory

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_29

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini createviews_29

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0029-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0030-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0030-HP

//! @SYMTestCaseDesc 		Construct a Concatenated view

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct a Concatenated view over multiple existing views.

//!				2. verify and validate whether the concatenated view is constructed properly

//! @SYMTestExpectedResults 	View is constructed successfuly

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_30

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini concatenatedview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0030-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0031-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0031-HP

//! @SYMTestCaseDesc 		User defined sort plug-in 

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct a Contact local or remote and named local view.

//!				2. During view construction, specify a user-defined sort plug-in 

//!				3. Validate that the view is sorted as per the user defined sort plug-in by checking the order of the contact-ids in the view i.e. the indices of the contact ids in the view must meet the sort plug-in criteria.

//! @SYMTestExpectedResults 	It is possible to perform construct a contacts local or remote and named local view sorted as per user defined sort plug-in

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithuserdefinesortplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0031-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0032-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0032-HP

//! @SYMTestCaseDesc 		Default sort plug-in not available

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct a Contacts local view or remote view or named remote view.

//!				2. During view construction, don’t specify any sort plug-in.

//!				3. At the same time, the default sort plug-must not be available.

//!				4. Validate that the view is sorted by checking the order of the contact-ids in the view

//!				i.e. the indices of the contact ids in the view must be sorted using CContactViewBase::CompareFieldsL()

//!				which uses TDesC::CompareC().

//! @SYMTestExpectedResults 	It is possible to construct a contacts local view or remote view or named local view, 

//!				when the default sort plug-in is unavailable.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithdefaultsortplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0032-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0033-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0033-HP

//! @SYMTestCaseDesc 		Empty descriptor as sort plug-in 

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct a Contact local or remote or named remote view.

//!				2. During view construction, specify a Null Descriptor as sort plug-in name.

//!				3. Validate that the view is sorted by checking the order of the contact-ids in the view i.e.

//!				the indices of the contact ids in the view must meet the built-in sort criteria which is based on 

//!				TDesC::CompareC() behaviour.

//! @SYMTestExpectedResults 	It is possible to construct a contact local or remote or named remote view by specifying an empty descriptor as the sort plug-in name.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithemptysortplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0033-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0034-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0034-HP

//! @SYMTestCaseDesc 		Default sort plug-in not available

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct a Contacts local view or remote view or named remote view.

//!				2. During view construction, don’t specify any sort plug-in.

//!				3. At the same time, the default sort plug-must not be available.

//!				4. Validate that the view is sorted by checking the order of the contact-ids in the view

//!				i.e. the indices of the contact ids in the view must be sorted using CContactViewBase::CompareFieldsL()

//!				which uses TDesC::CompareC().

//! @SYMTestExpectedResults 	It is possible to construct a contacts local view or remote view or named local view, 

//!				when the default sort plug-in is unavailable.

//! @SYMTestType 		CIT

RUN_TEST_STEP !Error=-1 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini localviewswithinvalidplugin

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0034-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0036-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0036-HP

//! @SYMTestCaseDesc 		Contact views operation under low disk conditions

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1. Construct multiple contact views.

//!				2. Set the file system to throw KErrDiskFull using RFs::SetErrorCondition API.

//!				3. Access the contact views as per 3.1.2.

//!				4. Validate the contact view access results i.e. it is perfectly valid if the contact 

//!				view access which further requires disk access fails with KErrDiskFull, But there should not 

//!				be any invalid error codes or panics as a result of contact view access under low disk conditions.

//! @SYMTestExpectedResults 	Contact View access that involves disk access should fail none other than KErrDiskFull error

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini lowdiskcondition

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0036-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0037-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0037-HP

//! @SYMTestCaseDesc 		Test contact view operations with media not in place.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct multiple contact views.

//!				2.Set the file system to throw KErrNotReady using RFs::SetErrorCondition API.

//!				3.Access the contact views as per 4.1.1.1.

//!				4.Validate the contact view access results i.e. it is perfectly valid if the contact view access which requires disk access fails with KErrNotReady, but there should not be any invalid error codes or panics as a result of contact view access when the media is not present.

//! @SYMTestExpectedResults 	Contact View access that involves disk access should fail with none other than KErrNotReady error, when the media doesn’t exist.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep c:\cntviewtest\configs\TestContactViewSuite.ini disknotreadycondition

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0037-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0038-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0038-HP

//! @SYMTestCaseDesc 		Multiple views over a local view

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct at least 5 dependent contact views over an existing local view.

//!				2.These dependent views can be any of the following - group view, sub view, concatenated view, filtered view, find view

//!				3.Validate the contact view count

//! @SYMTestExpectedResults 	It is possible to have multiple views over a local view and access them.

//! @SYMTestType 		CIT

RUN_TEST_STEP 300 CntPerfTestServer PrepareDataTestStep c:\cntviewtest\configs\TestContactViewSuite.ini preparedata_38

RUN_TEST_STEP 300 CntPerfTestServer TestContactViewAccessStep C:\Cntviewtest\configs\TestContactViewSuite.ini multipleviewonlocalview

END_TESTCASE PIM-APPENG-CONTACTS-VIEWS-I-0038-HP

START_TESTCASE	PIM-APPENG-CONTACTS-VIEWS-I-0039-HP

//! @SYMTestCaseID		PIM-APPENG-CONTACTS-VIEWS-I-0039-HP

//! @SYMTestCaseDesc 		Multiple views over an existing remote view.

//! @SYMPREQ			1187

//! @SYMTestStatus 		Implemented

//! @SYMTestPriority 		High

//! @SYMTestActions 		1.Construct at least 5 dependent contact views over an existing remote view.