1 /* |
|
2 * Copyright (c) 2002 Nokia Corporation and/or its subsidiary(-ies). |
|
3 * All rights reserved. |
|
4 * This component and the accompanying materials are made available |
|
5 * under the terms of "Eclipse Public License v1.0" |
|
6 * which accompanies this distribution, and is available |
|
7 * at the URL "http://www.eclipse.org/legal/epl-v10.html". |
|
8 * |
|
9 * Initial Contributors: |
|
10 * Nokia Corporation - initial contribution. |
|
11 * |
|
12 * Contributors: |
|
13 * |
|
14 * Description: |
|
15 * This is a localisation file for Phone |
|
16 * A .loc file is the one and only place where the logical strings |
|
17 * to be localised are defined. |
|
18 * |
|
19 */ |
|
20 |
|
21 |
|
22 // LOCALISATION STRINGS |
|
23 |
|
24 // d: It is text shown in a wait note when phone |
|
25 // d: tries to make an emergency call. |
|
26 // l: popup_note_window |
|
27 // w: |
|
28 // |
|
29 #define qtn_emerg_emergency_call_note "Attempting emergency call" |
|
30 |
|
31 // d: It is text shown in an error note when |
|
32 // d: emergency call creation fails. |
|
33 // l: popup_note_window |
|
34 // w: |
|
35 // |
|
36 #define qtn_emerg_call_error_note "Emergency call failed" |
|
37 |
|
38 // d: It is shown in a warning note when |
|
39 // d: user tries to make a normal call and |
|
40 // d: phone is requesting SIM card. |
|
41 // l: popup_note_window |
|
42 // w: |
|
43 // |
|
44 #define qtn_emerg_emergency_only "Emergency calls only" |
|
45 |
|
46 // d: It is text of phone application in application shell grid. |
|
47 // d: When user selects that item, then phone goes to idle state |
|
48 // d: or call related state. |
|
49 // l: cell_app_pane_t1 |
|
50 // w: |
|
51 // |
|
52 #define qtn_apps_phone_grid "Tel" |
|
53 |
|
54 // d: It is text of phone application in application shell list. |
|
55 // d: When user selects that item, then phone goes to idle state |
|
56 // d: or call related state. |
|
57 // l: list_single_large_graphic_pane_t1 |
|
58 // w: |
|
59 // |
|
60 #define qtn_apps_phone_list "Telephone" |
|
61 |
|
62 // d: It is the prompt text in one confirmation query dialog |
|
63 // d: It confirms the user to change the phone line(Toggle primary |
|
64 // d: and alternative phone line) |
|
65 // l: popup_note_window |
|
66 // w: |
|
67 // |
|
68 #define text_als_line_change_query "Change outgoing phone line?" |
|
69 |
|
70 // d: It is possible to change the line by long keypress on # -key |
|
71 // d: when the user has a possibility to use the number entry e.g. |
|
72 // d: in number entry (when there are no other digits included), when |
|
73 // d: the phone is in idle state and while in call. If the line |
|
74 // d: blocking setting is on, then the error note with this string |
|
75 // d: will be shown. |
|
76 // l: popup_note_window |
|
77 // w: |
|
78 // |
|
79 #define qtn_als_line_error_no_line_change "Line cannot be changed. The line blocking is on." |
|
80 |
|
81 // d: If the incoming call is diverted, this information note is shown |
|
82 // d: on the originally called party's phone. |
|
83 // l: popup_note_window |
|
84 // w: |
|
85 // |
|
86 #define qtn_mtcal_diverting_note "Diverting" |
|
87 |
|
88 // d: This message may be sent to the phone by the network at any time. |
|
89 // d: The message means that some supplementary service information has been lost |
|
90 // d: in the network and the user will have to activate her services again. |
|
91 // d: The message is presented as a information Note with this text |
|
92 // l: popup_note_window |
|
93 // w: |
|
94 // |
|
95 #define text_net_info_lost "Check network services" |
|
96 |
|
97 // d: The unit format of the cug soft indicator |
|
98 // l: soft_indicator_pane_t1 |
|
99 // w: |
|
100 // |
|
101 #define qtn_cug_indic_group "Group %N" |
|
102 |
|
103 // d: The confirmation query for the speed dial assignment. If the user tries |
|
104 // d: to create a call to speed dial number which is empty, this query dialog |
|
105 // d: is shown. |
|
106 // l: popup_note_window |
|
107 // w: |
|
108 // |
|
109 #define text_speed_dial_assign_new_qu "Speed dial not assigned. Assign it now?" |
|
110 |
|
111 // d: If user personalize the softkey on Idle state to "New message", when user |
|
112 // d: press softkey on idle state, the popup list dialog is shown on the screen. |
|
113 // d: The first line is this string, indicate user to write a new message. |
|
114 // d: same defination can be found in Message center |
|
115 // l: heading_pane_t1 |
|
116 // w: |
|
117 // |
|
118 #define qtn_mce_pop_up_write "Write:" |
|
119 |
|
120 // d: The format string defines how date are shown on the navi pane of idle state. |
|
121 // d: %0U stands for the week day, and %1U stands for date. |
|
122 // l: navi_text_pane_t1 |
|
123 // w: |
|
124 #define qtn_idle_time_format "%0U %1U" |
|
125 |
|
126 // d: It is template for information note text used to show |
|
127 // d: IMEI code. |
|
128 // d: %U is replaced with IMEI of the phone. |
|
129 // l: popup_note_window |
|
130 // w: |
|
131 // |
|
132 #define text_imei "Serial No.\n%U" |
|
133 |
|
134 // d: It is text shown in error note when empty sim location |
|
135 // d: is recalled in abbreviated dialling code. |
|
136 // l: popup_note_window |
|
137 // w: |
|
138 // |
|
139 #define qtn_simp_note_empty_location "No number stored in location %N" |
|
140 |
|
141 // d: suplement service notification. The network may send a notification |
|
142 // d: to the calling user which tells the CUG index used for the current |
|
143 // d: call. After the notification is received from the network, the phone |
|
144 // d: displays this confirmation note. |
|
145 // l: popup_note_window |
|
146 // w: |
|
147 // |
|
148 #define text_cug_in_use "Closed group %N in use" |
|
149 |
|
150 // d: If the network doesn’t support temporary CLIR suppression, this |
|
151 // d: Non-Phone Error Note is displayed and the call is made without |
|
152 // d: CLIR suppression. |
|
153 // l: popup_note_window |
|
154 // w: |
|
155 // |
|
156 #define text_clir_suppr_reject "Could not send own number" |
|
157 |
|
158 // d: If the call is diverted and the COLP has been activated there may be |
|
159 // d: a notification from the network. The information note with this |
|
160 // d: text is shown, where %U is the connected number. |
|
161 // l: popup_note_window |
|
162 // w: |
|
163 // |
|
164 #define text_colp_connected "Connected to %U" |
|
165 |
|
166 // d: If user tries to initiate a CS call during GPRS connection( attach or |
|
167 // d: context states ), an error note with this text is displayed. |
|
168 // l: popup_note_window |
|
169 // w: |
|
170 // |
|
171 #define qtn_gprs_err_conn_in_progress "End GPRS connection first" |
|
172 |
|
173 // d: When user enters *#2820# to the number entry a bluetooth address |
|
174 // d: is shown in a note. The note has this text before the address. |
|
175 // l: popup_note_window |
|
176 // w: |
|
177 // |
|
178 #define qtn_bt_dev_address "Bluetooth device address: %U" |
|
179 |
|
180 // d: When user enters *#9990# to the number entry and the bluetooth |
|
181 // d: loopback is enabled this text is shown in a note. |
|
182 // l: popup_note_window |
|
183 // w: |
|
184 // |
|
185 #define qtn_bt_loopback_enabled "Bluetooth RF loopback enabled." |
|
186 |
|
187 // d: When user enters *#9990# to the number entry and the bluetooth |
|
188 // d: loopback is disabled this text is shown in a note. |
|
189 // l: popup_note_window |
|
190 // w: |
|
191 // |
|
192 #define qtn_bt_loopback_disabled "Bluetooth RF loopback disabled." |
|
193 |
|
194 // d: If the network always presents calling party’s number to connected party and |
|
195 // d: user has temporarily tried to prevent this by invoking CLIR, the calling is prevented by |
|
196 // d: the operator. A global information note with following text is shown. |
|
197 // l: popup_note_window |
|
198 // w: |
|
199 #define text_clir_change "Activate own number sending" |
|
200 |
|
201 // d: If the user tries to press the volume key while in a TTY call, the following information |
|
202 // d: note is displayed and the volume is unchanged. |
|
203 // l: popup_note_window |
|
204 // w: |
|
205 // |
|
206 #define qtn_tty_info_no_audio_control "TTY call active. Volume control not available" |
|
207 |
|
208 // d: It is template for information note text used to show |
|
209 // d: Life timer code. |
|
210 // d: %U is replaced with Life timer value of the phone. |
|
211 // l: popup_note_window |
|
212 // w: |
|
213 // |
|
214 #define qtn_note_life_timer "Life timer\n%U" |
|
215 |
|
216 // d: Text in title pane in idle state |
|
217 // d: Remote SIM Access Profile is active. SIM or network is not accessible |
|
218 // d: from the terminal. This doesn't relate to normal user profiles like General |
|
219 // d: or Meeting. |
|
220 // l: title_pane_t2/opt9 |
|
221 // w: |
|
222 // r: 3.0 |
|
223 // |
|
224 #define qtn_mode_sap "Remote SIM" |
|
225 |
|
226 // d: It's a menu item. When it's selected, the call isn't |
|
227 // d: rejected, but a unified message editor with soft reject default text is opened. |
|
228 // l: list_single_pane_t1_cp2 |
|
229 // w: |
|
230 // |
|
231 #define qtn_call_soft_reject_option "Soft Reject" |
|
232 |
|
233 // d: It is template for information note text used to show WLAN MAC. |
|
234 // d: %U is replaced with MAC address. |
|
235 // l: popup_note_window |
|
236 // w: |
|
237 // r: 3.0 |
|
238 // |
|
239 #define qtn_wlan_info_mac_address "WLAN MAC address: %U" |
|
240 |
|
241 // d: It is text shown in an error note when |
|
242 // d: fixed dialling active. |
|
243 // l: popup_note_window |
|
244 // w: |
|
245 // r: 3.2 |
|
246 // |
|
247 #define qtn_fdn_call_not_allowed "Call not allowed, fixed dialling active" |
|
248 |
|
249 // d: This cause indicates that the called user cannot be reached because the network |
|
250 // d: through which the call has been routed does not serve the destination desired. |
|
251 // d: No route to destination |
|
252 // l: popup_note_window |
|
253 // w: |
|
254 // r: 5.0 |
|
255 // |
|
256 #define qtn_call_info_cause_value3 "Unable to make video call. Not supported by other phone or network." |
|
257 |
|
258 // d: This cause indicates that the call is being cleared because one of the users |
|
259 // d: involved in the call has requested that the call be cleared. |
|
260 // d: Normal call clearing |
|
261 // l: popup_note_window |
|
262 // w: |
|
263 // r: 5.0 |
|
264 // |
|
265 #define qtn_call_info_cause_value16 "Call ended" |
|
266 |
|
267 // d: This cause is used when a user does not respond to a call establishment |
|
268 // d: message with either an alerting or connect indication within the |
|
269 // d: prescribed period of time allocated. |
|
270 // d: No user responding |
|
271 // l: popup_note_window |
|
272 // w: |
|
273 // r: 5.0 |
|
274 // |
|
275 #define qtn_call_info_cause_value18 "No answer" |
|
276 |
|
277 // d: This cause indicates that the equipment sending this cause does not wish |
|
278 // d: to accept this call, although it could have accepted the call because the |
|
279 // d: equipment sending this cause is neither busy nor incompatible. |
|
280 // d: Call rejected |
|
281 // l: popup_note_window |
|
282 // w: |
|
283 // r: 5.0 |
|
284 // |
|
285 #define qtn_call_info_cause_value21 "Call rejected" |
|
286 |
|
287 // d: This cause is returned to a calling mobile station when the called party number |
|
288 // d: indicated by the calling mobile station is no longer assigned. |
|
289 // d: Number changed |
|
290 // l: popup_note_window |
|
291 // w: |
|
292 // r: 5.0 |
|
293 // |
|
294 #define qtn_call_info_cause_value22 "Number not in use" |
|
295 |
|
296 // d: This cause is used to report a normal event only when no other cause in the |
|
297 // d: normal class applies. |
|
298 // d: Normal, unspecified |
|
299 // l: popup_note_window |
|
300 // w: |
|
301 // r: 5.0 |
|
302 // |
|
303 #define qtn_call_info_cause_value31 "Call ended" |
|
304 |
|
305 // d: This cause indicates that there is no appropriate circuit/channel presently |
|
306 // d: available to handle the call. |
|
307 // d: No circuit/channel available |
|
308 // l: popup_note_window |
|
309 // w: |
|
310 // r: 5.0 |
|
311 // |
|
312 #define qtn_call_info_cause_value34 "Network busy" |
|
313 |
|
314 // d: This cause indicates that the network is not functioning correctly and that the |
|
315 // d: condition is likely to last a relatively long period of time; e.g., immediately |
|
316 // d: re-attempting the call is not likely to be successful. |
|
317 // d: Network out of order |
|
318 // l: popup_note_window |
|
319 // w: |
|
320 // r: 5.0 |
|
321 // |
|
322 #define qtn_call_info_cause_value38 "Unable to make video call. Not supported by other phone or network." |
|
323 |
|
324 // d: This cause indicates that the requested supplementary service could not be |
|
325 // d: provided by the network because the user has no completed the necessary |
|
326 // d: administrative arrangements with its supporting networks. |
|
327 // d: That cause may indicate also that the attempt fails due to the fact that receiving |
|
328 // d: end doesn’t support video call or is out of 3G coverage. |
|
329 // d: Requested facility not subscribed |
|
330 // l: popup_note_window |
|
331 // w: |
|
332 // r: 5.0 |
|
333 // |
|
334 #define qtn_call_info_cause_value50 "Unable to make video call. Not supported by other phone or network." |
|
335 |
|
336 // d: This cause indicates that although the called party is a member of the CUG for |
|
337 // d: the incoming CUG call, incoming calls are not allowed within this CUG. |
|
338 // d: Incoming calls barred within the CUG |
|
339 // l: popup_note_window |
|
340 // w: |
|
341 // r: 5.0 |
|
342 // |
|
343 #define qtn_call_info_cause_value55 "Number barred" |
|
344 |
|
345 // d: This cause indicates that the mobile station has requested a bearer capability |
|
346 // d: which is implemented by the equipment which generated this cause but the |
|
347 // d: mobile station is not authorized to use. |
|
348 // d: Bearer capability not authorized |
|
349 // l: popup_note_window |
|
350 // w: |
|
351 // r: 5.0 |
|
352 // |
|
353 #define qtn_call_info_cause_value57 "Unable to make video call. Not supported by other phone or network." |
|
354 |
|
355 // d: This cause indicates that the mobile station has requested a bearer capability |
|
356 // d: which is implemented by the equipment which generated this cause but which is |
|
357 // d: not available at this time. |
|
358 // d: Bearer capability not presently available |
|
359 // l: popup_note_window |
|
360 // w: |
|
361 // r: 5.0 |
|
362 // |
|
363 #define qtn_call_info_cause_value58 "Unable to make video call. Not supported by other phone or network." |
|
364 |
|
365 // d: This cause indicates that the equipment sending this cause has received a request |
|
366 // d: to establish a call which has low layer compatibility, high layer compatibility, or |
|
367 // d: other compatibility attributes (e.g., data rate) which cannot be accommodated. |
|
368 // d: Incompatible destination |
|
369 // l: popup_note_window |
|
370 // w: |
|
371 // r: 5.0 |
|
372 // |
|
373 #define qtn_call_info_cause_value88 "Unable to make video call. Not supported by other phone or network." |
|
374 |
|
375 // d: This cause indicates that there has been interworking with a network which does |
|
376 // d: not provide causes for actions it takes; thus, the precise cause for a message |
|
377 // d: which is being sent cannot be ascertained. |
|
378 // d: Interworking, unspecified |
|
379 // l: popup_note_window |
|
380 // w: |
|
381 // r: 5.0 |
|
382 // |
|
383 #define qtn_call_info_cause_value127 "Unable to make video call. Not supported by other phone or network." |
|
384 |
|
385 // d: Causes 25, 29, 30, 96, 97, 98, 99 and 102 |
|
386 // l: popup_note_window |
|
387 // w: |
|
388 // r: 5.0 |
|
389 // |
|
390 #define qtn_call_info_not_supported "Unable to make video call. Not supported by other phone or network." |
|
391 |
|
392 // d: Causes 63, 65, 70 and 79 |
|
393 // l: popup_note_window |
|
394 // w: |
|
395 // r: 5.0 |
|
396 // |
|
397 #define qtn_call_info_service_not_available "Unable to make video call. Not supported by other phone or network." |
|
398 |
|
399 // d: Defines wait note text when handover from WLAN->GSM is in progress. |
|
400 // l: popup_note_window |
|
401 // w: |
|
402 // r: 5.0 |
|
403 #define qtn_vcc_wait_ho_from_wlan "Handover from WLAN to GSM" |
|
404 |
|
405 // d: Defines wait note text when handover from GSM->WLAN is in progress. |
|
406 // l: popup_note_window |
|
407 // w: |
|
408 // r: 5.0 |
|
409 #define qtn_vcc_wait_ho_from_gsm "Handover from GSM to WLAN" |
|
410 |
|
411 // d: If handover fails, this note is displayed. |
|
412 // l: popup_note_window |
|
413 // w: |
|
414 // r: 5.0 |
|
415 // |
|
416 #define qtn_vcc_info_ho_failed "Handover failed" |
|
417 |
|
418 // d: Displayed when manual handover item is visible, but handover is not possible. |
|
419 // l: popup_note_window |
|
420 // w: |
|
421 // r: 5.0 |
|
422 // |
|
423 #define qtn_vcc_info_not_allowed "Handover not allowed" |
|
424 |
|
425 // d: Displayed when mobile originated video call gets out of UMTS coverage |
|
426 // l: popup_note_window |
|
427 // w: |
|
428 // r: 5.0 |
|
429 // |
|
430 #define qtn_video_call_only_possible_under_3g_coverage "Videocall only possible under 3G coverage" |
|
431 |
|
432 // d: Displayed when user tries to make a video call to a terminal which does not have a |
|
433 // d: video telephony client |
|
434 // l: popup_note_window |
|
435 // w: |
|
436 // r: 5.0 |
|
437 // |
|
438 #define qtn_unable_to_make_video_call_not_supported_by_other_phone "Unable to make video call. Not supported by other phone." |
|
439 |
|
440 // d: Displayed when user tries to make a video call to a terminal which is out of UMTS coverage |
|
441 // l: popup_note_window |
|
442 // w: |
|
443 // r: 5.0 |
|
444 // |
|
445 #define qtn_phone_out_of_3g_coverage "Phone switched off or out of 3G coverage" |
|
446 |
|
447 // d: Displayed when user tries to make a video call to a terminal which have barred incomin calls |
|
448 // l: popup_note_window |
|
449 // w: |
|
450 // r: 5.0 |
|
451 // |
|
452 #define qtn_called_number_has_barred_incoming_calls "Called number has barred incoming calls" |
|
453 |
|
454 // End of File |
|