--- a/phoneapp/phoneui2/loc/phone.loc	Fri Sep 17 08:29:19 2010 +0300
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,454 +0,0 @@
-/*
-* Copyright (c) 2002 Nokia Corporation and/or its subsidiary(-ies).
-* All rights reserved.
-* This component and the accompanying materials are made available
-* under the terms of "Eclipse Public License v1.0"
-* which accompanies this distribution, and is available
-* at the URL "http://www.eclipse.org/legal/epl-v10.html".
-*
-* Initial Contributors:
-* Nokia Corporation - initial contribution.
-*
-* Contributors:
-*
-* Description:
-*     This is a localisation file for Phone
-*     A .loc file is the one and only place where the logical strings
-*     to be localised are defined.
-*
-*/
-
-
-// LOCALISATION STRINGS
-
-// d: It is text shown in a wait note when phone
-// d: tries to make an emergency call.
-// l: popup_note_window
-// w:
-//
-#define qtn_emerg_emergency_call_note "Attempting emergency call"
-
-// d: It is text shown in an error note when
-// d: emergency call creation fails.
-// l: popup_note_window
-// w:
-//
-#define qtn_emerg_call_error_note "Emergency call failed"
-
-// d: It is shown in a warning note when
-// d: user tries to make a normal call and
-// d: phone is requesting SIM card.
-// l: popup_note_window
-// w:
-//
-#define qtn_emerg_emergency_only "Emergency calls only"
-
-// d: It is text of phone application in application shell grid.
-// d: When user selects that item, then phone goes to idle state
-// d: or call related state.
-// l: cell_app_pane_t1
-// w:
-//
-#define qtn_apps_phone_grid "Tel"
-
-// d: It is text of phone application in application shell list.
-// d: When user selects that item, then phone goes to idle state
-// d: or call related state.
-// l: list_single_large_graphic_pane_t1
-// w:
-//
-#define qtn_apps_phone_list "Telephone"
-
-// d: It is the prompt text in one confirmation query dialog
-// d: It confirms the user to change the phone line(Toggle primary
-// d: and alternative phone line)
-// l: popup_note_window
-// w:
-//
-#define text_als_line_change_query "Change outgoing phone line?"
-
-// d: It is possible to change the line by long keypress on # -key
-// d: when the user has a possibility to use the number entry e.g.
-// d: in number entry (when there are no other digits included), when
-// d: the phone is in idle state and while in call. If the line
-// d: blocking setting is on, then the error note with this string
-// d: will be shown.
-// l: popup_note_window
-// w:
-//
-#define qtn_als_line_error_no_line_change "Line cannot be changed. The line blocking is on."
-
-// d: If the incoming call is diverted, this information note is shown
-// d: on the originally called party's phone.
-// l: popup_note_window
-// w:
-//
-#define qtn_mtcal_diverting_note "Diverting"
-
-// d: This message may be sent to the phone by the network at any time.
-// d: The message means that some supplementary service information has been lost
-// d:  in the network and the user will have to activate her services again.
-// d: The message is presented as a information Note with this text
-// l: popup_note_window
-// w:
-//
-#define text_net_info_lost "Check network services"
-
-// d: The unit format of the cug soft indicator
-// l: soft_indicator_pane_t1
-// w:
-//
-#define qtn_cug_indic_group "Group %N"
-
-// d: The confirmation query for the speed dial assignment. If the user tries
-// d: to create a call to speed dial number which is empty, this query dialog
-// d: is shown.
-// l: popup_note_window
-// w:
-//
-#define text_speed_dial_assign_new_qu "Speed dial not assigned. Assign it now?"
-
-// d: If user personalize the softkey on Idle state to "New message", when user
-// d: press softkey on idle state, the popup list dialog is shown on the screen.
-// d: The first line is this string, indicate user to write a new message.
-// d: same defination can be found in Message center
-// l: heading_pane_t1
-// w:
-//
-#define qtn_mce_pop_up_write "Write:"
-
-// d: The format string defines how date are shown on the navi pane of idle state.
-// d: %0U stands for the week day, and %1U stands for date.
-// l: navi_text_pane_t1
-// w:
-#define qtn_idle_time_format "%0U %1U"
-
-// d: It is template for information note text used to show
-// d: IMEI code.
-// d: %U is replaced with IMEI of the phone.
-// l: popup_note_window
-// w:
-//
-#define text_imei "Serial No.\n%U"
-
-// d: It is text shown in error note when empty sim location
-// d: is recalled in abbreviated dialling code.
-// l: popup_note_window
-// w:
-//
-#define qtn_simp_note_empty_location "No number stored in location %N"
-
-// d: suplement service notification. The network may send a notification
-// d: to the calling user which tells the CUG index used for the current
-// d: call. After the notification is received from the network, the phone
-// d: displays this confirmation note.
-// l: popup_note_window
-// w:
-//
-#define text_cug_in_use "Closed group %N in use"
-
-// d: If the network doesn’t support temporary CLIR suppression, this
-// d: Non-Phone Error Note is displayed and the call is made without
-// d: CLIR suppression.
-// l: popup_note_window
-// w:
-//
-#define text_clir_suppr_reject "Could not send own number"
-
-// d: If the call is diverted and the COLP has been activated there may be
-// d: a notification from the network. The information note with this
-// d: text is shown, where %U is the connected number.
-// l: popup_note_window
-// w:
-//
-#define text_colp_connected "Connected to %U"
-
-// d: If user tries to initiate a CS call during GPRS connection( attach or
-// d: context states ), an error note with this text is displayed.
-// l: popup_note_window
-// w:
-//
-#define qtn_gprs_err_conn_in_progress "End GPRS connection first"
-
-// d: When user enters *#2820# to the number entry a bluetooth address
-// d: is shown in a note. The note has this text before the address.
-// l: popup_note_window
-// w:
-//
-#define qtn_bt_dev_address "Bluetooth device address: %U"
-
-// d: When user enters *#9990# to the number entry and the bluetooth
-// d: loopback is enabled this text is shown in a note.
-// l: popup_note_window
-// w:
-//
-#define qtn_bt_loopback_enabled "Bluetooth RF loopback enabled."
-
-// d: When user enters *#9990# to the number entry and the bluetooth
-// d: loopback is disabled this text is shown in a note.
-// l: popup_note_window
-// w:
-//
-#define qtn_bt_loopback_disabled "Bluetooth RF loopback disabled."
-
-// d: If the network always presents calling party’s number to connected party and
-// d: user has temporarily tried to prevent this by invoking CLIR, the calling is prevented by
-// d: the operator. A global information note with following text is shown.
-// l: popup_note_window
-// w:
-#define text_clir_change "Activate own number sending"
-
-// d: If the user tries to press the volume key while in a TTY call, the following information
-// d: note is displayed and the volume is unchanged.
-// l: popup_note_window
-// w:
-//
-#define qtn_tty_info_no_audio_control "TTY call active. Volume control not available"
-
-// d: It is template for information note text used to show
-// d: Life timer code.
-// d: %U is replaced with Life timer value of the phone.
-// l: popup_note_window
-// w:
-//
-#define qtn_note_life_timer "Life timer\n%U"
-
-// d: Text in title pane in idle state
-// d: Remote SIM Access Profile is active. SIM or network  is not accessible
-// d: from the terminal. This doesn't relate to normal user profiles like General
-// d: or Meeting.
-// l: title_pane_t2/opt9
-// w:
-// r: 3.0
-//
-#define qtn_mode_sap "Remote SIM"
-
-// d: It's a menu item. When it's selected, the call isn't
-// d: rejected, but a unified message editor with soft reject default text is opened.
-// l: list_single_pane_t1_cp2
-// w:
-//
-#define qtn_call_soft_reject_option "Soft Reject"
-
-// d: It is template for information note text used to show WLAN MAC.
-// d: %U is replaced with MAC address.
-// l: popup_note_window
-// w:
-// r: 3.0
-//
-#define qtn_wlan_info_mac_address "WLAN MAC address: %U"
-
-// d: It is text shown in an error note when
-// d: fixed dialling active.
-// l: popup_note_window
-// w:
-// r: 3.2
-//
-#define qtn_fdn_call_not_allowed "Call not allowed, fixed dialling active"
-
-// d: This cause indicates that the called user cannot be reached because the network
-// d: through which the call has been routed does not serve the destination desired.
-// d: No route to destination
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value3 "Unable to make video call. Not supported by other phone or network."
-
-// d: This cause indicates that the call is being cleared because one of the users
-// d: involved in the call has requested that the call be cleared.
-// d: Normal call clearing
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value16 "Call ended"
-
-// d: This cause is used when a user does not respond to a call establishment
-// d: message with either an alerting or connect indication within the
-// d: prescribed period of time allocated.
-// d: No user responding
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value18 "No answer"
-
-// d: This cause indicates that the equipment sending this cause does not wish
-// d: to accept this call, although it could have accepted the call because the
-// d: equipment sending this cause is neither busy nor incompatible.
-// d: Call rejected
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value21 "Call rejected"
-
-// d: This cause is returned to a calling mobile station when the called party number
-// d: indicated by the calling mobile station is no longer assigned.
-// d: Number changed
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value22 "Number not in use"
-
-// d: This cause is used to report a normal event only when no other cause in the
-// d: normal class applies.
-// d: Normal, unspecified
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value31 "Call ended"
-
-// d: This cause indicates that there is no appropriate circuit/channel presently
-// d: available to handle the call.
-// d: No circuit/channel available
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value34 "Network busy"
-
-// d: This cause indicates that the network is not functioning correctly and that the
-// d: condition is likely to last a relatively long period of time; e.g., immediately
-// d: re-attempting the call is not likely to be successful.
-// d: Network out of order
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value38 "Unable to make video call. Not supported by other phone or network."
-
-// d: This cause indicates that the requested supplementary service could not be
-// d: provided by the network because the user has no completed the necessary
-// d: administrative arrangements with its supporting networks.
-// d: That cause may indicate also that the attempt fails due to the fact that receiving
-// d: end doesn’t support video call or is out of 3G coverage.
-// d: Requested facility not subscribed
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value50 "Unable to make video call. Not supported by other phone or network."
-
-// d: This cause indicates that although the called party is a member of the CUG for
-// d: the incoming CUG call, incoming calls are not allowed within this CUG.
-// d: Incoming calls barred within the CUG
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value55 "Number barred"
-
-// d: This cause indicates that the mobile station has requested a bearer capability
-// d: which is implemented by the equipment which generated this cause but the
-// d: mobile station is not authorized to use.
-// d: Bearer capability not authorized
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value57 "Unable to make video call. Not supported by other phone or network."
-
-// d: This cause indicates that the mobile station has requested a bearer capability
-// d: which is implemented by the equipment which generated this cause but which is
-// d: not available at this time.
-// d: Bearer capability not presently available
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value58 "Unable to make video call. Not supported by other phone or network."
-
-// d: This cause indicates that the equipment sending this cause has received a request
-// d: to establish a call which has low layer compatibility, high layer compatibility, or
-// d: other compatibility attributes (e.g., data rate) which cannot be accommodated.
-// d: Incompatible destination
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value88 "Unable to make video call. Not supported by other phone or network."
-
-// d: This cause indicates that there has been interworking with a network which does
-// d: not provide causes for actions it takes; thus, the precise cause for a message
-// d: which is being sent cannot be ascertained.
-// d: Interworking, unspecified
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_cause_value127 "Unable to make video call. Not supported by other phone or network."
-
-// d: Causes 25, 29, 30, 96, 97, 98, 99 and 102
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_not_supported "Unable to make video call. Not supported by other phone or network."
-
-// d: Causes 63, 65, 70 and 79
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_call_info_service_not_available "Unable to make video call. Not supported by other phone or network."
-
-// d: Defines wait note text when handover from WLAN->GSM is in progress.
-// l: popup_note_window
-// w:
-// r: 5.0
-#define qtn_vcc_wait_ho_from_wlan "Handover from WLAN to GSM"
-
-// d: Defines wait note text when handover from GSM->WLAN is in progress.
-// l: popup_note_window
-// w:
-// r: 5.0
-#define qtn_vcc_wait_ho_from_gsm "Handover from GSM to WLAN"
-
-// d: If handover fails, this note is displayed.
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_vcc_info_ho_failed "Handover failed"
-
-// d: Displayed when manual handover item is visible, but handover is not possible.
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_vcc_info_not_allowed "Handover not allowed"
-
-// d: Displayed when mobile originated video call gets out of UMTS coverage
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_video_call_only_possible_under_3g_coverage "Videocall only possible under 3G coverage"
-
-// d: Displayed when user tries to make a video call to a terminal which does not have a
-// d: video telephony client
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_unable_to_make_video_call_not_supported_by_other_phone "Unable to make video call. Not supported by other phone."
-
-// d: Displayed when user tries to make a video call to a terminal which is out of UMTS coverage
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_phone_out_of_3g_coverage "Phone switched off or out of 3G coverage"
-
-// d: Displayed when user tries to make a video call to a terminal which have barred incomin calls
-// l: popup_note_window
-// w:
-// r: 5.0
-//
-#define qtn_called_number_has_barred_incoming_calls "Called number has barred incoming calls"
-
-// End of File