# Copyright (c) 2004-2009 Nokia Corporation and/or its subsidiary(-ies).

# All rights reserved.

# This component and the accompanying materials are made available

# under the terms of the License "Symbian Foundation License v1.0"

# which accompanies this distribution, and is available

# at the URL "http://www.symbianfoundation.org/legal/sfl-v10.html".

#

# Initial Contributors:

# Nokia Corporation - initial contribution.

#

# Contributors:

#

# Description:

# //    route.ini - a configuration file for ipadm

# THIS IS AN EXAMPLE FILE

# This file should be located in C:\Data\IpAdm\route.ini.

# This file is processed by IpAdm when you push the

# Add Routes -button.

# Each line starting with route-add followed by positional

# parameters is directly used as a KSoInetAddRoute parameter:

# route-add <dest> <netmask> <metric> <gateway> [interface]

# If optional parameter interface is omitted, gateway address

# determines the interface. With this command you can add static

# routes into the routing table.

# Some 6to4 route examples

# route-add 2001:: ffff:: 1 2002:c171:3a50::c171:3a50

# route-add 3ffe:: ffff:: 1 2002:c171:3a50::c171:3a50

# route-add 2001:: ffff:: 1 2002:836b:4179::836b:4179

# route-add 3ffe:: ffff:: 1 2002:836b:4179::836b:4179

# Some other examples

# route-add 172.21.40.1 255.255.254.0 1 - 172.21.40.106

# route-add 3ffe:501:fffff:ff05:: ffff:ffff:ffff:ffff:: 1 3ffe:501:ffff:ff03:200:ff:fe00:a0a0 fe80::260:63ff:fe01:d6a9

# To add a default route, use zero address and prefix

# route-add :: :: 1 3ffe:501:ffff:ff03:200:ff:fe00:a0a0 fe80::260:63ff:fe01:d6a9

# route-add 0.0.0.0 0.0.0.0 1 172.21.40.1 182.21.40.106

# Similarly you can configure interfaces with ifconfig

# ifconfig <if> <prefix> prefix <prefixlen> ["alias"] ["up"/"down"] ["delete"]

# ifconfig ethernet 10.0.5.3 alias

# ifconfig ethernet 3ffe:501:ffff:100:: prefix 64 alias

# ifconfig ethernet fe80::200:ff:f00:a0a0 prefix 64 delete

# ifconfig ethernet fe80::260:63ff:fe01:d6a9 prefix 64 up

# If you want to initiate DAD on the fly you need to remove

# all addresses of specific interface identifier from an interface

# and then define a new interface identifier to be checked by DAD:

# ifconfig ethernet 3ffe:501:ffff:100:200:ff:fe00:a0a0 prefix 64 delete

# ifconfig ethernet fe80::200:ff:fe00:a0a0 prefix 64 delete

# ifconfig ethernet fe80::260:63ff:fe01:d6a9 prefix 64 delete

# ifconfig ethernet fe80::260:63ff:fe01:d6a9 prefix 64 up

# The above method is handy for example when running the TAHI

# stateless address autoconfiguration tests requiring frequently

# all addresses to be removed and DAD to be performed for link-local

# address. With EPOC you don't need to reboot, just have appropriate

# settings in route.ini and push the Add Routes button in IpAdm.

#