/*

* Copyright (c) 2001-2006 Nokia Corporation and/or its subsidiary(-ies).

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of the License "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  EAP and WLAN authentication protocols.

*

*/

/*

* %version: 7 %

*/

#if !defined(_ABS_EAP_SESSION_CORE_H_)

#define _ABS_EAP_SESSION_CORE_H_

#include "eap_header.h"

#include "eap_array.h"

#if defined(USE_EAP_SIMPLE_CONFIG)

	#include "abs_eap_configuration_if.h"

#endif // #if defined(USE_EAP_SIMPLE_CONFIG)

#include "eapol_key_types.h"

class eap_am_network_id_c;

class eap_buf_chain_wr_c;

class eap_configuration_field_c;

class eap_variable_data_c;

class abs_eap_base_type_c;

class abs_eap_state_notification_c;

class eap_base_type_c;

class eap_rogue_ap_entry_c;

class eap_master_session_key_c;

/// This class defines the interface the eap_core_c class

/// will use with the partner class (lower layer).

class EAP_EXPORT abs_eap_session_core_c

#if defined(USE_EAP_SIMPLE_CONFIG)

: public abs_eap_configuration_if_c

#endif // #if defined(USE_EAP_SIMPLE_CONFIG)

{

private:

	//--------------------------------------------------

	//--------------------------------------------------

protected:

	//--------------------------------------------------

	//--------------------------------------------------

public:

	//--------------------------------------------------

	/**

	 * The destructor of the abs_eap_core class does nothing special.

	 */

	virtual ~abs_eap_session_core_c()

	{

	}

	/**

	 * The constructor of the abs_eap_core class does nothing special.

	 */

	abs_eap_session_core_c()

	{

	}

	/**

	 * The derived class could send packets to partner class with this function.

	 * @see abs_eap_base_type_c::packet_send().

	 */

	virtual eap_status_e packet_send(

		const eap_am_network_id_c * const network_id,

		eap_buf_chain_wr_c * const sent_packet,

		const u32_t header_offset,

		const u32_t data_length,

		const u32_t buffer_length) = 0;

	/**

	 * The get_header_offset() function obtains the header offset of EAP-packet.

	 * @see abs_eap_base_type_c::get_header_offset().

	 */

	virtual u32_t get_header_offset(

		u32_t * const MTU,

		u32_t * const trailer_length) = 0;

	/**

	 * The load_module() function function indicates the lower level to

	 * load new module of EAP-type.

	 * @param type is the requested EAP-type.

	 * @param partner is pointer to the caller object.

	 * The partner of the new created EAP-type object is the caller object.

	 * @param eap_type is a pointer to a pointer of EAP-type object.

	 * Adaptation module sets eap_type pointer to created EAP-type object.

	 * @param is_client_when_true parameter indicates whether the network entity should

	 * act as a client (true) or server (false), in terms of EAP-protocol whether

	 * this network entity is EAP-supplicant (true) or EAP-authenticator (false).

	 * @param receive_network_id includes the addresses (network identity) and packet type.

	 */

	virtual eap_status_e load_module(

		const eap_type_value_e type,

		const eap_type_value_e /* tunneling_type */,

		abs_eap_base_type_c * const partner,

		eap_base_type_c ** const eap_type,

		const bool is_client_when_true,

		const eap_am_network_id_c * const receive_network_id) = 0;

	/**

	 * The unload_module() function unloads the module of a EAP-type. 

	 * @param eap_type is the requested EAP-type.

	 */

	virtual eap_status_e unload_module(const eap_type_value_e eap_type) = 0;

	/**

	 * The session calls the restart_authentication() function

	 * when EAP-authentication is needed with another peer.

	 * This is also used when session restarts authentication.

	 * @param receive_network_id includes the addresses (network identity) and packet type.

	 * @param is_client_when_true indicates whether the EAP-type should act as a client or server,

	 * in terms of EAP-protocol whether this network entity is EAP-supplicant (true) or EAP-authenticator (false).

	 * @param force_clean_restart this selects whether the server removes this session (true) or not (false).

	 * @param from_timer tells whether the timer calls this function (true) or not (false).

	 */

	virtual eap_status_e restart_authentication(

		const eap_am_network_id_c * const receive_network_id,

		const bool is_client_when_true,

		const bool force_clean_restart,

		const bool from_timer = false) = 0;

	/**

	 * Note this function is just an example. Parameters will change later.

	 * The packet_data_crypto_keys() function gives the generated keys to lower level.

	 * After EAP-authentication has generated the keys it calls this function

	 * to offer the keys to lower level.

	 * @see abs_eap_base_type_c::packet_data_crypto_keys().

	 */

	virtual eap_status_e packet_data_crypto_keys(

		const eap_am_network_id_c * const send_network_id,

		const eap_master_session_key_c * const master_session_key

		) = 0;

	/**

	 * The read_configure() function reads the configuration data identified

	 * by the field string of field_length bytes length. Adaptation module must direct

	 * the query to some persistent store.

	 * @see abs_eap_base_type_c::read_configure().

	 */

	virtual eap_status_e read_configure(

		const eap_configuration_field_c * const field,

		eap_variable_data_c * const data) = 0;

	/**

	 * The write_configure() function writes the configuration data identified

	 * by the field string of field_length bytes length. Adaptation module must direct

	 * the action to some persistent store.

	 * @see abs_eap_base_type_c::write_configure().

	 */

	virtual eap_status_e write_configure(

		const eap_configuration_field_c * const field,

		eap_variable_data_c * const data) = 0;

	/**

	 * This is notification of internal state transition.

	 * This is used for notifications, debugging and protocol testing.

	 * The primal notifications are eap_state_variable_e::eap_state_authentication_finished_successfully

	 * and eap_state_variable_e::eap_state_authentication_terminated_unsuccessfully.

	 * These two notifications are sent from EAP-protocol layer (eap_protocol_layer_e::eap_protocol_layer_eap).

	 * These two notifications tells the end state of authentication session. These are the only

	 * reliable indications of the final status of authentication session.

	 * You MUST NOT make decision based on the return value of abs_eap_stack_interface_c::packet_process().

	 */

	virtual void state_notification(

		const abs_eap_state_notification_c * const state) = 0;

	/**

	 * The set_timer() function initializes timer to be elapsed after time_ms milliseconds.

	 * @param initializer is pointer to object which timer_expired() function will

	 * be called after timer elapses.

	 * @param id is identifier which will be returned in timer_expired() function.

	 * The user selects and interprets the id for this timer.

	 * @param data is pointer to any user selected data which will be returned in timer_expired() function.

	 * @param time_ms is the time of timer in milli seconds.

	 *

	 * Adaptation module internally implements the timer.

	 */

	virtual eap_status_e set_timer(

		abs_eap_base_timer_c * const initializer, 

		const u32_t id, 

		void * const data,

		const u32_t time_ms) = 0;

	/**

	 * The cancel_timer() function cancels the timer id initiated by initializer.

	 * @param initializer is pointer to object which set the cancelled timer.

	 * @param id is identifier which will be returned in timer_expired() function.

	 * The user selects and interprets the id for this timer.

	 *

	 * Adaptation module internally implements the timer.

	 */

	virtual eap_status_e cancel_timer(

		abs_eap_base_timer_c * const initializer, 

		const u32_t id) = 0;

	/**

	 * This function queries the validity of EAP-type.

	 * Lower layer should return eap_status_ok if this EAP-type is supported.

	 * @param eap_type is the requested EAP-type.

	 */

	virtual eap_status_e check_is_valid_eap_type(const eap_type_value_e eap_type) = 0;

	/**

	 * This function queries the list of supported EAP-types.

	 * Lower layer should return eap_status_ok if this call succeeds.

	 * @param eap_type_list will include the list of supported EAP-types. Each value in list

	 * is type of u32_t and represent one supported EAP-type. List consists of subsequent u32_t type values.

	 */

	virtual eap_status_e get_eap_type_list(

		eap_array_c<eap_type_value_e> * const eap_type_list) = 0;

	virtual eap_status_e add_rogue_ap(eap_array_c<eap_rogue_ap_entry_c> & rogue_ap_list) = 0;

	/**

	 * The set_session_timeout() function changes the session timeout timer to be elapsed after session_timeout_ms milliseconds.

	 */

	virtual eap_status_e set_session_timeout(

		const u32_t session_timeout_ms) = 0;

	virtual eap_status_e complete_get_802_11_authentication_mode(

		const eap_status_e completion_status,

		const eap_am_network_id_c * const receive_network_id,

		const eapol_key_802_11_authentication_mode_e mode) = 0;

	virtual eap_status_e complete_remove_eap_session(

		const bool complete_to_lower_layer,

		const eap_am_network_id_c * const receive_network_id) = 0;

	//--------------------------------------------------

}; // class abs_eap_session_core_c

#endif //#if !defined(_ABS_EAP_SESSION_CORE_H_)

//--------------------------------------------------

// End.