/*

* Copyright (c) 2001-2006 Nokia Corporation and/or its subsidiary(-ies).

* All rights reserved.

* This component and the accompanying materials are made available

* under the terms of the License "Eclipse Public License v1.0"

* which accompanies this distribution, and is available

* at the URL "http://www.eclipse.org/legal/epl-v10.html".

*

* Initial Contributors:

* Nokia Corporation - initial contribution.

*

* Contributors:

*

* Description:  EAP and WLAN authentication protocols.

*

*/

/*

*/

#if !defined(_ABS_SIMPLE_CONFIG_BASE_RECORD_H_)

#define _ABS_SIMPLE_CONFIG_BASE_RECORD_H_

#include "eap_header.h"

#include "simple_config_types.h"

class eap_buf_chain_wr_c;

class eap_variable_data_c;

class abs_eap_state_notification_c;

class abs_eap_base_timer_c;

class abs_eap_base_type_c;

class eap_base_type_c;

class eap_network_id_selector_c;

class eap_am_network_id_c;

class eap_rogue_ap_entry_c;

class eap_master_session_key_c;

/// The class is the interface to partner class of the simple_config_base_record_c class.

/// This declares the pure virtual member functions simple_config_base_record_c class could call.

class EAP_EXPORT abs_simple_config_base_record_c

{

private:

	//--------------------------------------------------

	//--------------------------------------------------

protected:

	//--------------------------------------------------

	//--------------------------------------------------

public:

	//--------------------------------------------------

	/**

	 * The destructor of the abs_simple_config_base_record_c class does nothing special.

	 */

	virtual ~abs_simple_config_base_record_c()

	{

	}

	/**

	 * The constructor of the abs_simple_config_base_record_c class does nothing special.

	 */

	abs_simple_config_base_record_c()

	{

	}

	/**

	 * The derived class could send packets to partner class with this function.

	 * @param sent_packet includes the buffer for the whole packet and initialized 

	 * SIMPLE_CONFIG-packet in correct offset.

	 * @param message_type is the type of the SIMPLE_CONFIG message indicated by the higher layer.

	 */

	virtual eap_status_e simple_config_packet_send(

		eap_buf_chain_wr_c * const sent_packet,

		const simple_config_Message_Type_e message_type) = 0;

	/**

	 * The get_header_offset() function obtains the header offset of SIMPLE_CONFIG-packet.

	 * @param MTU_length is pointer to variable to store the maximum transfer unit (MTU).

	 * MTU is the maximum SIMPLE_CONFIG-packet length in bytes

	 * @param trailer_length is pointer to the variable to store length

	 * of trailer needed by lower levels.

	 * @return Function returns the offset of SIMPLE_CONFIG-header.

	 *

	 * The needed buffer length is ((offset) + (SIMPLE_CONFIG-packet length) + (trailer)) bytes.

	 * Each layer adds the length of the header to offset.

	 * Each layer removes the length of the header and trailer from MTU.

	 *

	 * Now some ascii graphics follows.

	 * @code

	 * |<-------------------------buffer length----------------------------------------->|

	 * |                                                                                 |

	 * |                           +-----+---------------------------------+             |

	 * |                           | SIMPLE_CONFIG | data                            |             |

	 * |                           +-----+---------------------------------+             |

	 * |<----offset--------------->|<----MTU------------------------------>|<--trailer-->|

	 * |                           |                                       |             |

	 * |                           |                                       |             |

	 * |                     +-----+---------------------------------------+             |

	 * |                     | EAP |  data                                 |             |

	 * |                     +-----+---------------------------------------+             |

	 * |<----offset--------->|<----MTU------------------------------------>|<--trailer-->|

	 * |                     |                                             |             |

	 * |             +-------+---------------------------------------------+             |

	 * |             | EAPOL |  data                                       |             |

	 * |             +-------+---------------------------------------------+             |

	 * |<--offset--->|<----MTU-------------------------------------------->|<--trailer-->|

	 * |             |                                                     |             |

	 * +-------------+-----------------------------------------------------+-------------+

	 * |  ETHERNET   |  data                                               |  trailer    |

	 * +-------------+-----------------------------------------------------+-------------+

	 * |<----MTU------------------------------------------------------------------------>|

	 * @endcode

	 *

	 */

	virtual u32_t get_header_offset(

		u32_t * const MTU_length,

		u32_t * const trailer_length) = 0;

	/**

	 * This function restarts authentication to send_network_id.

	 * @param receive_network_id is network identity of source.

	 * @param is_client_when_true indicates whether this object should act as a client (true)

	 * or server (false), in terms of EAP-protocol whether this network entity is EAP-supplicant (true)

	 * or EAP-authenticator (false).

	 * @param force_clean_restart causes authentication restart even the current authentication is on going.

	 * @param from_timer indicates whether this was called from timer (true).

	 */

	virtual eap_status_e restart_authentication(

		const eap_am_network_id_c * const receive_network_id,

		const bool is_client_when_true,

		const bool force_clean_restart,

		const bool from_timer) = 0;

	/**

	 * The read_configure() function reads the configuration data identified

	 * by the field string of field_length bytes length. Adaptation module must direct

	 * the query to some persistent store.

	 * @param field is generic configure string idenfying the required configure data.

	 * @param field_length is length of the field string.

	 * @param data is pointer to existing eap_variable_data object.

	 * 

	 * EAP-type should store it's parameters to an own database. The own database should be accessed

	 * through adaptation module of EAP-type. See eap_am_type_simple_config_simulator_c::type_configure_read.

	 */

	virtual eap_status_e read_configure(

		const eap_configuration_field_c * const field,

		eap_variable_data_c * const data) = 0;

	/**

	 * The write_configure() function writes the configuration data identified

	 * by the field string of field_length bytes length. Adaptation module must direct

	 * the action to some persistent store.

	 * @param field is generic configure string idenfying the required configure data.

	 * @param field_length is length of the field string.

	 * @param data is pointer to existing eap_variable_data object.

	 * 

	 * EAP-type should store it's parameters to an own database. The own database should be accessed

	 * through adaptation module of EAP-type. See eap_am_type_simple_config_simulator_c::type_configure_write.

	 */

	virtual eap_status_e write_configure(

		const eap_configuration_field_c * const field,

		eap_variable_data_c * const data) = 0;

	/**

	 * This is notification of internal state transition.

	 * This is used for notifications, debugging and protocol testing.

	 * The primal notifications are eap_state_variable_e::eap_state_authentication_finished_successfully

	 * and eap_state_variable_e::eap_state_authentication_terminated_unsuccessfully. EAP-type MUST send these

	 * two notifications to lower layer.

	 * These two notifications are sent using EAP-protocol layer (eap_protocol_layer_e::eap_protocol_layer_eap).

	 * See also eap_state_notification_c.

	 */

	virtual void state_notification(

		const abs_eap_state_notification_c * const state) = 0;

	/**

	 * The set_timer() function initializes timer to be elapsed after p_time_ms milliseconds.

	 * @param initializer is pointer to object which timer_expired() function will

	 * be called after timer elapses.

	 * @param id is identifier which will be returned in timer_expired() function.

	 * The user selects and interprets the id for this timer.

	 * @param data is pointer to any user selected data which will be returned in timer_expired() function.

	 *

	 * Adaptation module internally implements the timer.

	 */

	virtual eap_status_e set_timer(

		abs_eap_base_timer_c * const initializer, 

		const u32_t id, 

		void * const data,

		const u32_t p_time_ms) = 0;

	/**

	 * The cancel_timer() function cancels the timer id initiated by initializer.

	 *

	 * Adaptation module internally implements the timer.

	 */

	virtual eap_status_e cancel_timer(

		abs_eap_base_timer_c * const initializer, 

		const u32_t id) = 0;

	/**

	 * This is needed by PEAP type.

	 * The load_module() function function indicates the lower level to

	 * load new module of EAP-type.

	 * @param type is the requested EAP-type.

	 * @param partner is pointer to the caller object.

	 * The partner of the new created EAP-type object is the caller object.

	 * @param eap_type is a pointer to a pointer of EAP-type object.

	 * Adaptation module sets eap_type pointer to created EAP-type object.

	 * @param is_client_when_true parameter indicates whether the network entity should

	 * act as a client (true) or server (false), in terms of EAP-protocol whether

	 * this network entity is EAP-supplicant (true) or EAP-authenticator (false).

	 */

	virtual eap_status_e load_module(

		const eap_type_value_e type,

		const eap_type_value_e /* tunneling_type */,

		abs_eap_base_type_c * const partner,

		eap_base_type_c ** const eap_type,

		const bool is_client_when_true,

		const eap_am_network_id_c * const receive_network_id) = 0;

	/**

	 * This is needed by PEAP type.

	 * The unload_module() function unloads the module of a EAP-type. 

	 * @param type is the requested EAP-type.

	 */

	virtual eap_status_e unload_module(const eap_type_value_e type) = 0;

	/**

	 * Note this function is just an example. Parameters will change later.

	 * The packet_data_crypto_keys() function gives the generated keys to lower level.

	 * After EAP-authentication has generated the keys it calls this function

	 * to offer the keys to lower level.

	 * @param master_session_key is pointer to the first byte of the master session key.

	 * @param master_session_length is count of bytes in the master session key.

	 */

	virtual eap_status_e packet_data_crypto_keys(

		const eap_am_network_id_c * const send_network_id,

		const eap_master_session_key_c * const master_session_key

		) = 0;

	/**

	 * This is needed by PEAP type.

	 * This function queries the validity of EAP-type.

	 * Lower layer should return eap_status_ok if this EAP-type is supported.

	 */

	virtual eap_status_e check_is_valid_eap_type(const eap_type_value_e eap_type) = 0;

	/**

	 * This function queries the list of supported EAP-types.

	 * Lower layer should return eap_status_ok if this call succeeds.

	 * @param eap_type_list will include the list of supported EAP-types. Each value in list

	 * is type of u32_t and represent one supported EAP-type. List consists of subsequent u32_t type values.

	 */

	virtual eap_status_e get_eap_type_list(

		eap_array_c<eap_type_value_e> * const eap_type_list) = 0;

	/**

	 * The set_session_timeout() function changes the session timeout timer to be elapsed after session_timeout_ms milliseconds.

	 */

	virtual eap_status_e set_session_timeout(

		const u32_t session_timeout_ms) = 0;

	virtual eap_status_e add_rogue_ap(eap_array_c<eap_rogue_ap_entry_c> & rogue_ap_list) = 0;

	//--------------------------------------------------

}; // class abs_simple_config_base_record_c

#endif //#if !defined(_ABS_SIMPLE_CONFIG_BASE_RECORD_H_)

//--------------------------------------------------

// End.