<!-- ssyreference_config_template.xml -->

<!-- SsyReference configuration file template -->

<!-- ************************************************************* -->

<!-- * NOTE. DO NOT LEAVE ANY COMMENTS IN THE ACTUAL CONFIG FILE * -->

<!-- ************************************************************* -->

<SsyReferenceConfig>

    <SsyGeneralInformation>

        <!-- General information for SSY itself -->

        <Properties>

        <!-- General properties of the sensor -->

    	  <!-- TSensrvProperty. Each property has its own item defined in here -->

        	<!-- Property example 1 -->

        	<PropertyItem PropertyId="TSensrvPropertyId"

        	    ItemIndex="Item index in channel data structure"

        		PropertyValue="Value of the property"

        		MaxValue="Maximum value of data"

        		MinValue="Minimum value of data"

        		ReadOnly="Read only or modifiable"

        		PropertyType="TSensrvPropertyType">

            </PropertyItem>

            <!-- Property example 2 -->

        	<PropertyItem PropertyId="TSensrvPropertyId"

        		ItemIndex="Item index in channel data structure"

        		PropertyValue="Value of the property"

        		MaxValue="Maximum value of data"

        		MinValue="Minimum value of data"

        		ReadOnly="Read only or modifiable"

        		PropertyType="TSensrvPropertyType">

            </PropertyItem>

        </Properties>

    </SsyGeneralInformation>

    <ChannelInformationGroup ChannelCount="2">

    	<!-- Channel definitions. Each channel item contains all information of one channel -->

    	<!-- Channel example 1 -->

    	<ChannelItem 

    		ChannelId="This value is updated runtime when Sensrv has defined channel IDs" 

    		ContextType="TSensrvContextType" 

    		Quantity="TSensrvQuantity" 

    		ChannelType="TSensrvChannelTypeId" 

    		Location="Location of the sensor" 

    		Vendor="Vendor ID"

    		DataTypeId="data type ID identifies data type defined here. See sensrvchanneldatatypes.h">

    		  <!-- One channel definition. Each channel has its own item block -->

        	<!-- TSensrvChannelInfo. Contains information of this channel; Context type, Quantity etc. --> 

        	<!-- Contains properties of this channel. -->

        	<Properties>

        	  <!-- TSensrvProperty. Each property has its own item defined in here -->

        		<!-- Property example 3 -->

    		    <PropertyItem PropertyId="TSensrvPropertyId"

    		      ItemIndex="Item index in channel data structure"

    		      PropertyValue="Value of the property"

    		      MaxValue="Maximum value of data"

    		      MinValue="Minimum value of data"

    		      ReadOnly="Read only or modifiable"

    		      PropertyType="TSensrvPropertyType">

        		</PropertyItem>

    		    <!-- Property example 4 -->

    		    <PropertyItem PropertyId="TSensrvPropertyId"

    		      ItemIndex="Item index in channel data structure"

    		      PropertyValue="Value of the property"

    		      MaxValue="Maximum value of data"

    		      MinValue="Minimum value of data"

    		      ReadOnly="Read only or modifiable"

    		      PropertyType="TSensrvPropertyType">

        		</PropertyItem>

        	</Properties>

            <!-- Channel data. Information of generated data by this channel.  -->

            <!-- There may be several different (yet same type) data items. Next data item is added to  -->

            <!-- buffer after the previous data items (all according to count) are added and last Interval is passed -->

            <ChannelData StartIntervalMs="Time in milliseconds to start filling buffer after StartChannelData()">

                <ChannelDataItem DataTypeId="data type ID identifies data type defined here. See sensrvchanneldatatypes.h" count="Number of this data items to be added into buffer (with the same values)" 

    			     									 IntervalMs="Time in milliseconds after next data item is added into buffer">

                    <!-- Content of this channel item is dependent on the type of this channel. It must be one and only one of the following -->

                    <SsyRefChannelDataAxis XAxis="Integer value of X Axis" YAxis="Integer value of Y Axis" ZAxis="Integer value of Z Axis" ><!-- This type has DataTypeID 0x00010001 --></SsyRefChannelDataAxis>

                    <SsyRefChannelDataTapping Direction="direction of tapping"><!-- This type has DataTypeID 0x00010002 --></SsyRefChannelDataTapping>

                </ChannelDataItem>

                <!-- Next channel data item -->

                <ChannelDataItem DataTypeId="data type ID identifies data type defined here. See sensrvchanneldatatypes.h" count="Number of this data items to be added into buffer (with the same values)" 

    			     									 IntervalMs="Time in milliseconds after next data item is added into buffer">

                    <!-- Content of this channel item is dependent on the type of this channel. It must be one and only one of the following -->

                    <SsyRefChannelDataAxis XAxis="Integer value of X Axis" YAxis="Integer value of Y Axis" ZAxis="Integer value of Z Axis" ><!-- This type has DataTypeID 0x00010001 --></SsyRefChannelDataAxis>

                    <SsyRefChannelDataTapping Direction="direction of tapping"><!-- This type has DataTypeID 0x00010002 --></SsyRefChannelDataTapping>

                </ChannelDataItem>

            </ChannelData>

    	</ChannelItem>

    	<!-- Channel example 2 -->

    	<ChannelItem 

    		ChannelId="This value is updated runtime when Sensrv has defined channel IDs" 

    		ContextType="TSensrvContextType" 

    		Quantity="TSensrvQuantity" 

    		ChannelType="TSensrvChannelTypeId" 

    		Location="Location of the sensor" 

    		Vendor="Vendor ID"

    		DataTypeId="data type ID identifies data type defined here. See sensrvchanneldatatypes.h">

    		<!-- One channel definition. Each channel has its own item block -->

        	<!-- TSensrvChannelInfo. Contains information of this channel; Context type, Quantity etc. -->

            <!-- Contains properties of this channel. -->

        	<Properties>

        	  	 <!-- TSensrvProperty. Each property has its own item defined in here -->

        		 <!-- Property example 5 -->

    		    <PropertyItem PropertyId="TSensrvPropertyId"

    		      ItemIndex="Item index in channel data structure"

    		      PropertyValue="Value of the property"

    		      MaxValue="Maximum value of data"

    		      MinValue="Minimum value of data"

    		      ReadOnly="Read only or modifiable"

    		      PropertyType="TSensrvPropertyType">

        		</PropertyItem>

        		<!-- Property example 6 -->

    		    <PropertyItem PropertyId="TSensrvPropertyId"

    		      ItemIndex="Item index in channel data structure"

    		      PropertyValue="Value of the property"

    		      MaxValue="Maximum value of data"

    		      MinValue="Minimum value of data"

    		      ReadOnly="Read only or modifiable"

    		      PropertyType="TSensrvPropertyType">

        	    </PropertyItem>

        	</Properties>

            <!-- Channel data. Information of generated data by this channel.  -->

            <!-- There may be several different (yet same type) data items. Next data item is added to  -->

            <!-- buffer after the previous data items (all according to count) are added and last Interval is passed -->

            <ChannelData StartIntervalMs="Time in milliseconds to start filling buffer after StartChannelData()">

                <ChannelDataItem DataTypeId="data type ID identifies data type defined here. See sensrvchanneldatatypes.h" count="Number of this data items to be added into buffer (with the same values)" 

    			     									 IntervalMs="Time in milliseconds after next data item is added into buffer">

                    <!-- Content of this channel item is dependent on the type of this channel. It must be one and only one of the following -->

                    <SsyRefChannelDataAxis XAxis="Integer value of X Axis" YAxis="Integer value of Y Axis" ZAxis="Integer value of Z Axis" ><!-- This type has DataTypeID 0x00010001 --></SsyRefChannelDataAxis>

                    <SsyRefChannelDataTapping Direction="direction of tapping"><!-- This type has DataTypeID 0x00010002 --></SsyRefChannelDataTapping>

                    </ChannelDataItem>

                <!-- Next channel data item -->

                <ChannelDataItem DataTypeId="data type ID identifies data type defined here. See sensrvchanneldatatypes.h" count="Number of this data items to be added into buffer (with the same values)" 

    			     									 IntervalMs="Time in milliseconds after next data item is added into buffer">

                    <!-- Content of this channel item is dependent on the type of this channel. It must be one and only one of the following -->

                    <SsyRefChannelDataAxis XAxis="Integer value of X Axis" YAxis="Integer value of Y Axis" ZAxis="Integer value of Z Axis" ><!-- This type has DataTypeID 0x00010001 --></SsyRefChannelDataAxis>

                    <SsyRefChannelDataTapping Direction="direction of tapping"><!-- This type has DataTypeID 0x00010002 --></SsyRefChannelDataTapping>

                </ChannelDataItem>

            </ChannelData>

    	</ChannelItem>

    </ChannelInformationGroup>

</SsyReferenceConfig>