/****************************************************************************

**

** Copyright (C) 2009 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the Qt3Support module of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

#include "qplatformdefs.h"

#ifndef QT_NO_MIME

#include "q3dragobject.h"

#include "qpixmap.h"

#include "qevent.h"

#include "qfile.h"

#include "qtextcodec.h"

#include "qapplication.h"

#include "qpoint.h"

#include "qwidget.h"

#include "qbuffer.h"

#include "qimagereader.h"

#include "qimagewriter.h"

#include "qimage.h"

#include "qregexp.h"

#include "qdir.h"

#include "qdrag.h"

#include "q3strlist.h"

#include "q3cstring.h"

#include <private/qobject_p.h>

#include <ctype.h>

#if defined(Q_OS_WINCE)

#include <winsock.h>

#include "qfunctions_wince.h"

#endif

QT_BEGIN_NAMESPACE

static QWidget *last_target = 0;

class QDragMime;

class Q3DragObjectPrivate : public QObjectPrivate

{

    Q_DECLARE_PUBLIC(Q3DragObject)

public:

    Q3DragObjectPrivate(): hot(0,0),pm_cursor(0) {}

    QPixmap pixmap;

    QPoint hot;

    // store default cursors

    QPixmap *pm_cursor;

};

class Q3TextDragPrivate : public Q3DragObjectPrivate

{

    Q_DECLARE_PUBLIC(Q3TextDrag)

public:

    Q3TextDragPrivate() { setSubType(QLatin1String("plain")); }

    void setSubType(const QString & st) {

        subtype = st;

        fmt = "text/" + subtype.toLatin1();

    }

    QString txt;

    QString subtype;

    QByteArray fmt;

};

class Q3StoredDragPrivate : public Q3DragObjectPrivate

{

    Q_DECLARE_PUBLIC(Q3StoredDrag)

public:

    Q3StoredDragPrivate() {}

    const char* fmt;

    QByteArray enc;

};

class Q3ImageDragPrivate : public Q3DragObjectPrivate

{

    Q_DECLARE_PUBLIC(Q3ImageDrag)

public:

    QImage img;

    QList<QByteArray> ofmts;

};

class QDragMime : public QMimeData

{

public:

    QDragMime(Q3DragObject *parent) : QMimeData(), dragObject(parent) { }

    ~QDragMime();

    QByteArray data(const QString &mimetype) const;

    bool hasFormat(const QString &mimetype) const;

    QStringList formats() const;

    QPointer<Q3DragObject> dragObject;

};

QDragMime::~QDragMime()

{

    delete dragObject;

}

QByteArray QDragMime::data(const QString &mimetype) const

{

    return dragObject->encodedData(mimetype.latin1());

}

bool QDragMime::hasFormat(const QString &mimetype) const

{

    return dragObject->provides(mimetype.latin1());

}

QStringList QDragMime::formats() const

{

    int i = 0;

    const char *format;

    QStringList f;

    while ((format = dragObject->format(i))) {

        f.append(QLatin1String(format));

        ++i;

    }

    return f;

}

/*!

    Constructs a drag object called \a name with a parent \a

    dragSource.

    Note that the drag object will be deleted when the \a dragSource is

    deleted.

*/

Q3DragObject::Q3DragObject(QWidget * dragSource, const char * name)

    : QObject(*(new Q3DragObjectPrivate), dragSource)

{

    setObjectName(QLatin1String(name));

}

/*! \internal */

Q3DragObject::Q3DragObject(Q3DragObjectPrivate &dd, QWidget *dragSource)

    : QObject(dd, dragSource)

{

}

/*!

    Destroys the drag object, canceling any drag and drop operation in

    which it is involved.

*/

Q3DragObject::~Q3DragObject()

{

}

#ifndef QT_NO_DRAGANDDROP

/*!

    Set the pixmap, \a pm, to display while dragging the object. The

    platform-specific implementation will use this where it can - so

    provide a small masked pixmap, and do not assume that the user

    will actually see it.

    The \a hotspot is the point on (or off) the pixmap that should be

    under the cursor as it is dragged. It is relative to the top-left

    pixel of the pixmap.

    \warning We have seen problems with drag cursors on different

    graphics hardware and driver software on Windows. Setting the

    graphics acceleration in the display settings down one tick solved

    the problems in all cases.

*/

void Q3DragObject::setPixmap(QPixmap pm, const QPoint& hotspot)

{

    Q_D(Q3DragObject);

    d->pixmap = pm;

    d->hot = hotspot;

}

/*!

    \overload

    Uses a hotspot that positions the pixmap below and to the right of

    the mouse pointer. This allows the user to clearly see the point

    on the window where they are dragging the data.

*/

void Q3DragObject::setPixmap(QPixmap pm)

{

    setPixmap(pm,QPoint(-10, -10));

}

/*!

    Returns the currently set pixmap, or a null pixmap if none is set.

    \sa QPixmap::isNull()

*/

QPixmap Q3DragObject::pixmap() const

{

    return d_func()->pixmap;

}

/*!

    Returns the currently set pixmap hotspot.

    \sa setPixmap()

*/

QPoint Q3DragObject::pixmapHotSpot() const

{

    return d_func()->hot;

}

/*!

    Starts a drag operation using the contents of this object, using

    DragDefault mode.

    The function returns true if the caller should delete the original

    copy of the dragged data (but see target()); otherwise returns

    false.

    If the drag contains \e references to information (e.g. file names

    in a Q3UriDrag are references) then the return value should always

    be ignored, as the target is expected to directly manipulate the

    content referred to by the drag object. On X11 the return value should

    always be correct anyway, but on Windows this is not necessarily

    the case; e.g. the file manager starts a background process to

    move files, so the source \e{must not} delete the files!

    Note that on Windows the drag operation will start a blocking modal

    event loop that will not dispatch any QTimers.

*/

bool Q3DragObject::drag()

{

    return drag(DragDefault);

}

/*!

    After the drag completes, this function will return the QWidget

   which received the drop, or 0 if the data was dropped on another

    application.

    This can be useful for detecting the case where drag and drop is

    to and from the same widget.

*/

QWidget *Q3DragObject::target()

{

    return last_target;

}

/*!

    Starts a drag operation using the contents of this object, using

    \c DragMove mode. Be sure to read the constraints described in

    drag().

    Returns true if the data was dragged as a \e move, indicating that

    the caller should remove the original source of the data (the drag

    object must continue to have a copy); otherwise returns false.

    \sa drag() dragCopy() dragLink()

*/

bool Q3DragObject::dragMove()

{

    return drag(DragMove);

}

/*!

    Starts a drag operation using the contents of this object, using

    \c DragCopy mode. Be sure to read the constraints described in

    drag().

    \sa drag() dragMove() dragLink()

*/

void Q3DragObject::dragCopy()

{

    (void)drag(DragCopy);

}

/*!

    Starts a drag operation using the contents of this object, using

    \c DragLink mode. Be sure to read the constraints described in

    drag().

    \sa drag() dragCopy() dragMove()

*/

void Q3DragObject::dragLink()

{

    (void)drag(DragLink);

}

/*!

    \enum Q3DragObject::DragMode

    This enum describes the possible drag modes.

    \value DragDefault     The mode is determined heuristically.

    \value DragCopy        The data is copied.

    \value DragMove        The data is moved.

    \value DragLink        The data is linked.

    \value DragCopyOrMove  The user chooses the mode by using the

                           \key{Shift} key to switch from the default

                           copy mode to move mode.

*/

/*!

    \overload

    Starts a drag operation using the contents of this object.

    At this point, the object becomes owned by Qt, not the

    application. You should not delete the drag object or anything it

    references. The actual transfer of data to the target application

    will be done during future event processing - after that time the

    drag object will be deleted.

    Returns true if the dragged data was dragged as a \e move,

    indicating that the caller should remove the original source of

    the data (the drag object must continue to have a copy); otherwise

    returns false.

    The \a mode specifies the drag mode (see

    \l{Q3DragObject::DragMode}.) Normally one of the simpler drag(),

    dragMove(), or dragCopy() functions would be used instead.

*/

bool Q3DragObject::drag(DragMode mode)

{

    Q_D(Q3DragObject);

    QDragMime *data = new QDragMime(this);

    int i = 0;

    const char *fmt;

    while ((fmt = format(i))) {

        data->setData(QLatin1String(fmt), encodedData(fmt));

        ++i;

    }

    QDrag *drag = new QDrag(qobject_cast<QWidget *>(parent()));

    drag->setMimeData(data);

    drag->setPixmap(d->pixmap);

    drag->setHotSpot(d->hot);

    Qt::DropActions allowedOps;

    Qt::DropAction defaultOp = Qt::IgnoreAction;

    switch(mode) {

    default:

    case DragDefault:

    case DragCopyOrMove:

        allowedOps = Qt::CopyAction|Qt::MoveAction;

        defaultOp = Qt::IgnoreAction;

        break;

    case DragCopy:

        allowedOps = Qt::CopyAction;

        defaultOp = Qt::CopyAction;

        break;

    case DragMove:

        allowedOps = Qt::MoveAction;

        defaultOp = Qt::MoveAction;

        break;

    case DragLink:

        allowedOps = Qt::LinkAction;

        defaultOp = Qt::LinkAction;

        break;

    }

    bool retval = (drag->exec(allowedOps, defaultOp) == Qt::MoveAction);

    last_target = drag->target();

    return retval;

}

#endif

/*!

    Returns a pointer to the widget where this object originated (the drag

    source).

*/

QWidget * Q3DragObject::source()

{

    if (parent() && parent()->isWidgetType())

        return (QWidget *)parent();

    else

        return 0;

}

/*!

    \class Q3DragObject

    \brief The Q3DragObject class encapsulates MIME-based data

    transfer.

    \compat

    Q3DragObject is the base class for all data that needs to be

    transferred between and within applications, both for drag and

    drop and for the clipboard.

    See the \link dnd.html Drag and drop documentation\endlink for an

    overview of how to provide drag and drop in your application.

    See the QClipboard documentation for an overview of how to provide

    cut and paste in your application.

    The drag() function is used to start a drag operation. You can

    specify the \l DragMode in the call or use one of the convenience

    functions dragCopy(), dragMove(), or dragLink(). The drag source

    where the data originated is retrieved with source(). If the data

    was dropped on a widget within the application, target() will

    return a pointer to that widget. Specify the pixmap to display

    during the drag with setPixmap().

*/

static

void stripws(QByteArray& s)

{

    int f;

    while ((f = s.indexOf(' ')) >= 0)

        s.remove(f,1);

}

/*!

    \class Q3TextDrag

    \brief The Q3TextDrag class is a drag and drop object for

    transferring plain and Unicode text.

    \compat

    Plain text is passed in a QString which may contain multiple lines

    (i.e. may contain newline characters). The drag target will receive

    the newlines according to the runtime environment, e.g. LF on Unix,

    and CRLF on Windows.

    Qt provides no built-in mechanism for delivering only a single-line.

    For more information about drag and drop, see the Q3DragObject class

    and the \link dnd.html drag and drop documentation\endlink.

*/

/*!

    Constructs a text drag object with the given \a name, and sets its data

    to \a text. The \a dragSource is the widget that the drag operation started

    from.

*/

Q3TextDrag::Q3TextDrag(const QString &text, QWidget * dragSource, const char * name)

    : Q3DragObject(*new Q3TextDragPrivate, dragSource)

{

    setObjectName(QLatin1String(name));

    setText(text);

}

/*!

    Constructs a default text drag object with the given \a name.

    The \a dragSource is the widget that the drag operation started from.

*/

Q3TextDrag::Q3TextDrag(QWidget * dragSource, const char * name)

    : Q3DragObject(*(new Q3TextDragPrivate), dragSource)

{

    setObjectName(QLatin1String(name));

}

/*! \internal */

Q3TextDrag::Q3TextDrag(Q3TextDragPrivate &dd, QWidget *dragSource)

    : Q3DragObject(dd, dragSource)

{

}

/*!

    Destroys the text drag object.

*/

Q3TextDrag::~Q3TextDrag()

{

}

/*!

    \fn void Q3TextDrag::setSubtype(const QString &subtype)

    Sets the MIME \a subtype of the text being dragged. The default subtype

    is "plain", so the default MIME type of the text is "text/plain".

    You might use this to declare that the text is "text/html" by calling

    setSubtype("html").

*/

void Q3TextDrag::setSubtype(const QString & st)

{

    d_func()->setSubType(st);

}

/*!

    Sets the \a text to be dragged. You will need to call this if you did

    not pass the text during construction.