/****************************************************************************

**

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the QtNetwork module of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

//#define QABSTRACTSOCKET_DEBUG

/*!

    \class QAbstractSocket

    \brief The QAbstractSocket class provides the base functionality

    common to all socket types.

    \reentrant

    \ingroup network

    \inmodule QtNetwork

    QAbstractSocket is the base class for QTcpSocket and QUdpSocket

    and contains all common functionality of these two classes. If

    you need a socket, you have two options:

    \list

    \i  Instantiate QTcpSocket or QUdpSocket.

    \i  Create a native socket descriptor, instantiate

        QAbstractSocket, and call setSocketDescriptor() to wrap the

        native socket.

    \endlist

    TCP (Transmission Control Protocol) is a reliable,

    stream-oriented, connection-oriented transport protocol. UDP

    (User Datagram Protocol) is an unreliable, datagram-oriented,

    connectionless protocol. In practice, this means that TCP is

    better suited for continuous transmission of data, whereas the

    more lightweight UDP can be used when reliability isn't

    important.

    QAbstractSocket's API unifies most of the differences between the

    two protocols. For example, although UDP is connectionless,

    connectToHost() establishes a virtual connection for UDP sockets,

    enabling you to use QAbstractSocket in more or less the same way

    regardless of the underlying protocol. Internally,

    QAbstractSocket remembers the address and port passed to

    connectToHost(), and functions like read() and write() use these

    values.

    At any time, QAbstractSocket has a state (returned by

    state()). The initial state is UnconnectedState. After

    calling connectToHost(), the socket first enters

    HostLookupState. If the host is found, QAbstractSocket enters

    ConnectingState and emits the hostFound() signal. When the

    connection has been established, it enters ConnectedState and

    emits connected(). If an error occurs at any stage, error() is

    emitted. Whenever the state changes, stateChanged() is emitted.

    For convenience, isValid() returns true if the socket is ready for

    reading and writing, but note that the socket's state must be

    ConnectedState before reading and writing can occur.

    Read or write data by calling read() or write(), or use the

    convenience functions readLine() and readAll(). QAbstractSocket

    also inherits getChar(), putChar(), and ungetChar() from

    QIODevice, which work on single bytes. The bytesWritten() signal

    is emitted when data has been written to the socket (i.e., when

    the client has read the data). Note that Qt does not limit the

    write buffer size. You can monitor its size by listening to this

    signal.

    The readyRead() signal is emitted every time a new chunk of data

    has arrived. bytesAvailable() then returns the number of bytes

    that are available for reading. Typically, you would connect the

    readyRead() signal to a slot and read all available data there.

    If you don't read all the data at once, the remaining data will

    still be available later, and any new incoming data will be

    appended to QAbstractSocket's internal read buffer. To limit the

    size of the read buffer, call setReadBufferSize().

    To close the socket, call disconnectFromHost(). QAbstractSocket enters

    QAbstractSocket::ClosingState. After all pending data has been written to

    the socket, QAbstractSocket actually closes the socket, enters

    QAbstractSocket::ClosedState, and emits disconnected(). If you want to

    abort a connection immediately, discarding all pending data, call abort()

    instead. If the remote host closes the connection, QAbstractSocket will

    emit error(QAbstractSocket::RemoteHostClosedError), during which the socket

    state will still be ConnectedState, and then the disconnected() signal

    will be emitted.

    The port and address of the connected peer is fetched by calling

    peerPort() and peerAddress(). peerName() returns the host name of

    the peer, as passed to connectToHost(). localPort() and

    localAddress() return the port and address of the local socket.

    QAbstractSocket provides a set of functions that suspend the

    calling thread until certain signals are emitted. These functions

    can be used to implement blocking sockets:

    \list

    \o waitForConnected() blocks until a connection has been established.

    \o waitForReadyRead() blocks until new data is available for

    reading.

    \o waitForBytesWritten() blocks until one payload of data has been

    written to the socket.

    \o waitForDisconnected() blocks until the connection has closed.

    \endlist

    We show an example:

    \snippet doc/src/snippets/network/tcpwait.cpp 0

    If \l{QIODevice::}{waitForReadyRead()} returns false, the

    connection has been closed or an error has occurred.

    Programming with a blocking socket is radically different from

    programming with a non-blocking socket. A blocking socket doesn't

    require an event loop and typically leads to simpler code.

    However, in a GUI application, blocking sockets should only be

    used in non-GUI threads, to avoid freezing the user interface.

    See the \l network/fortuneclient and \l network/blockingfortuneclient

    examples for an overview of both approaches.

    QAbstractSocket can be used with QTextStream and QDataStream's

    stream operators (operator<<() and operator>>()). There is one

    issue to be aware of, though: You must make sure that enough data

    is available before attempting to read it using operator>>().

    \sa QFtp, QNetworkAccessManager, QTcpServer

*/

/*!

    \fn void QAbstractSocket::hostFound()

    This signal is emitted after connectToHost() has been called and

    the host lookup has succeeded.

    \sa connected()

*/

/*!

    \fn void QAbstractSocket::connected()

    This signal is emitted after connectToHost() has been called and

    a connection has been successfully established.

    \sa connectToHost(), disconnected()

*/

/*!

    \fn void QAbstractSocket::disconnected()

    This signal is emitted when the socket has been disconnected.

    \warning If you need to delete the sender() of this signal in a slot connected

    to it, use the \l{QObject::deleteLater()}{deleteLater()} function.

    \sa connectToHost(), disconnectFromHost(), abort()

*/

/*!

    \fn void QAbstractSocket::error(QAbstractSocket::SocketError socketError)

    This signal is emitted after an error occurred. The \a socketError

    parameter describes the type of error that occurred.

    QAbstractSocket::SocketError is not a registered metatype, so for queued

    connections, you will have to register it with Q_DECLARE_METATYPE() and

    qRegisterMetaType().

    \sa error(), errorString(), {Creating Custom Qt Types}

*/

/*!

    \fn void QAbstractSocket::stateChanged(QAbstractSocket::SocketState socketState)

    This signal is emitted whenever QAbstractSocket's state changes.

    The \a socketState parameter is the new state.

    QAbstractSocket::SocketState is not a registered metatype, so for queued

    connections, you will have to register it with Q_REGISTER_METATYPE() and

    qRegisterMetaType().

    \sa state(), {Creating Custom Qt Types}

*/

/*!

    \fn void QAbstractSocket::proxyAuthenticationRequired(const QNetworkProxy &proxy, QAuthenticator *authenticator)

    \since 4.3

    This signal can be emitted when a \a proxy that requires

    authentication is used. The \a authenticator object can then be

    filled in with the required details to allow authentication and

    continue the connection.

    \note It is not possible to use a QueuedConnection to connect to

    this signal, as the connection will fail if the authenticator has

    not been filled in with new information when the signal returns.

    \sa QAuthenticator, QNetworkProxy

*/

/*!

    \enum QAbstractSocket::NetworkLayerProtocol

    This enum describes the network layer protocol values used in Qt.

    \value IPv4Protocol IPv4

    \value IPv6Protocol IPv6

    \value UnknownNetworkLayerProtocol Other than IPv4 and IPv6

    \sa QHostAddress::protocol()

*/

/*!

    \enum QAbstractSocket::SocketType

    This enum describes the transport layer protocol.

    \value TcpSocket TCP

    \value UdpSocket UDP

    \value UnknownSocketType Other than TCP and UDP

    \sa QAbstractSocket::socketType()

*/

/*!

    \enum QAbstractSocket::SocketError

    This enum describes the socket errors that can occur.

    \value ConnectionRefusedError The connection was refused by the

           peer (or timed out).

    \value RemoteHostClosedError The remote host closed the

           connection. Note that the client socket (i.e., this socket)

           will be closed after the remote close notification has

           been sent.

    \value HostNotFoundError The host address was not found.

    \value SocketAccessError The socket operation failed because the

           application lacked the required privileges.

    \value SocketResourceError The local system ran out of resources

           (e.g., too many sockets).

    \value SocketTimeoutError The socket operation timed out.

    \value DatagramTooLargeError The datagram was larger than the

           operating system's limit (which can be as low as 8192

           bytes).

    \value NetworkError An error occurred with the network (e.g., the

           network cable was accidentally plugged out).

    \value AddressInUseError The address specified to QUdpSocket::bind() is

           already in use and was set to be exclusive.

    \value SocketAddressNotAvailableError The address specified to

           QUdpSocket::bind() does not belong to the host.

    \value UnsupportedSocketOperationError The requested socket operation is

           not supported by the local operating system (e.g., lack of

           IPv6 support).

    \value ProxyAuthenticationRequiredError The socket is using a proxy, and

           the proxy requires authentication.

    \value SslHandshakeFailedError The SSL/TLS handshake failed, so

           the connection was closed (only used in QSslSocket)

    \value UnfinishedSocketOperationError Used by QAbstractSocketEngine only,

           The last operation attempted has not finished yet (still in progress in

            the background).

    \value ProxyConnectionRefusedError Could not contact the proxy server because

           the connection to that server was denied

    \value ProxyConnectionClosedError The connection to the proxy server was closed

           unexpectedly (before the connection to the final peer was established)

    \value ProxyConnectionTimeoutError The connection to the proxy server timed out

           or the proxy server stopped responding in the authentication phase.

    \value ProxyNotFoundError The proxy address set with setProxy() (or the application

           proxy) was not found.

    \value ProxyProtocolError The connection negotiation with the proxy server

           because the response from the proxy server could not be understood.

    \value UnknownSocketError An unidentified error occurred.

    \sa QAbstractSocket::error()

*/

/*!

    \enum QAbstractSocket::SocketState

    This enum describes the different states in which a socket can be.

    \value UnconnectedState The socket is not connected.

    \value HostLookupState The socket is performing a host name lookup.

    \value ConnectingState The socket has started establishing a connection.

    \value ConnectedState A connection is established.

    \value BoundState The socket is bound to an address and port (for servers).

    \value ClosingState The socket is about to close (data may still

    be waiting to be written).

    \value ListeningState For internal use only.

    \omitvalue Idle

    \omitvalue HostLookup

    \omitvalue Connecting

    \omitvalue Connected

    \omitvalue Closing

    \omitvalue Connection

    \sa QAbstractSocket::state()

*/

/*!

    \enum QAbstractSocket::SocketOption

    \since 4.6

    This enum represents the options that can be set on a socket.

    If desired, they can be set after having received the connected() signal from

    the socket or after having received a new socket from a QTcpServer.

    \value LowDelayOption Try to optimize the socket for low latency. For a QTcpSocket

    this would set the TCP_NODELAY option and disable Nagle's algorithm. Set this to 1

    to enable.

    \value KeepAliveOption Set this to 1 to enable the SO_KEEPALIVE socket option

    \sa QAbstractSocket::setSocketOption(), QAbstractSocket::socketOption()

*/

#include "qabstractsocket.h"

#include "qabstractsocket_p.h"

#include <qabstracteventdispatcher.h>

#include <qdatetime.h>

#include <qhostaddress.h>

#include <qhostinfo.h>

#include <qmetaobject.h>

#include <qpointer.h>

#include <qtimer.h>

#ifndef QT_NO_OPENSSL

#include <QtNetwork/qsslsocket.h>

#endif

#include <private/qthread_p.h>

#ifdef QABSTRACTSOCKET_DEBUG

#include <qdebug.h>

#endif

#include <time.h>

#define Q_CHECK_SOCKETENGINE(returnValue) do { \

    if (!d->socketEngine) { \

        return returnValue; \

    } } while (0)

#ifndef QABSTRACTSOCKET_BUFFERSIZE

#define QABSTRACTSOCKET_BUFFERSIZE 32768

#endif

#define QT_CONNECT_TIMEOUT 30000

#define QT_TRANSFER_TIMEOUT 120000

QT_BEGIN_NAMESPACE

#if defined QABSTRACTSOCKET_DEBUG

QT_BEGIN_INCLUDE_NAMESPACE

#include <qstring.h>

#include <ctype.h>

QT_END_INCLUDE_NAMESPACE

/*

    Returns a human readable representation of the first \a len

    characters in \a data.

*/

static QByteArray qt_prettyDebug(const char *data, int len, int maxLength)

{

    if (!data) return "(null)";

    QByteArray out;

    for (int i = 0; i < len; ++i) {

        char c = data[i];

        if (isprint(int(uchar(c)))) {

            out += c;

        } else switch (c) {

        case '\n': out += "\\n"; break;

        case '\r': out += "\\r"; break;

        case '\t': out += "\\t"; break;

        default:

            QString tmp;

            tmp.sprintf("\\%o", c);

            out += tmp.toLatin1();

        }

    }

    if (len < maxLength)

        out += "...";

    return out;

}

#endif

static bool isProxyError(QAbstractSocket::SocketError error)

{

    switch (error) {

    case QAbstractSocket::ProxyAuthenticationRequiredError:

    case QAbstractSocket::ProxyConnectionRefusedError:

    case QAbstractSocket::ProxyConnectionClosedError:

    case QAbstractSocket::ProxyConnectionTimeoutError:

    case QAbstractSocket::ProxyNotFoundError:

    case QAbstractSocket::ProxyProtocolError:

        return true;

    default:

        return false;

    }

}

/*! \internal

    Constructs a QAbstractSocketPrivate. Initializes all members.

*/

QAbstractSocketPrivate::QAbstractSocketPrivate()

    : readSocketNotifierCalled(false),

      readSocketNotifierState(false),

      readSocketNotifierStateSet(false),

      emittedReadyRead(false),

      emittedBytesWritten(false),

      abortCalled(false),

      closeCalled(false),

      pendingClose(false),

      port(0),

      localPort(0),

      peerPort(0),

      socketEngine(0),

      cachedSocketDescriptor(-1),

#ifdef Q_OS_LINUX

      addToBytesAvailable(0),

#endif

      readBufferMaxSize(0),

      readBuffer(QABSTRACTSOCKET_BUFFERSIZE),

      writeBuffer(QABSTRACTSOCKET_BUFFERSIZE),

      isBuffered(false),

      blockingTimeout(30000),

      connectTimer(0),

      disconnectTimer(0),

      connectTimeElapsed(0),

      hostLookupId(-1),

      socketType(QAbstractSocket::UnknownSocketType),

      state(QAbstractSocket::UnconnectedState),

      socketError(QAbstractSocket::UnknownSocketError)

{

}

/*! \internal

    Destructs the QAbstractSocket. If the socket layer is open, it

    will be reset.

*/

QAbstractSocketPrivate::~QAbstractSocketPrivate()

{

}

/*! \internal

    Resets the socket layer, clears the read and write buffers and

    deletes any socket notifiers.

*/

void QAbstractSocketPrivate::resetSocketLayer()

{

#if defined (QABSTRACTSOCKET_DEBUG)

    qDebug("QAbstractSocketPrivate::resetSocketLayer()");

#endif

    if (socketEngine) {

        socketEngine->close();

        socketEngine->disconnect();

        delete socketEngine;

        socketEngine = 0;

        cachedSocketDescriptor = -1;

    }

    if (connectTimer)

        connectTimer->stop();

    if (disconnectTimer)

        disconnectTimer->stop();

}

/*! \internal

    Initializes the socket layer to by of type \a type, using the

    network layer protocol \a protocol. Resets the socket layer first

    if it's already initialized. Sets up the socket notifiers.

*/

bool QAbstractSocketPrivate::initSocketLayer(QAbstractSocket::NetworkLayerProtocol protocol)

{

#ifdef QT_NO_NETWORKPROXY

    // this is here to avoid a duplication of the call to createSocketEngine below

    static const QNetworkProxy &proxyInUse = *(QNetworkProxy *)0;

#endif

    Q_Q(QAbstractSocket);

#if defined (QABSTRACTSOCKET_DEBUG)

    QString typeStr;