/****************************************************************************

**

** Copyright (C) 2010 Nokia Corporation and/or its subsidiary(-ies).

** All rights reserved.

** Contact: Nokia Corporation (qt-info@nokia.com)

**

** This file is part of the QtMultimedia module of the Qt Toolkit.

**

** $QT_BEGIN_LICENSE:LGPL$

** No Commercial Usage

** This file contains pre-release code and may not be distributed.

** You may use this file in accordance with the terms and conditions

** contained in the Technology Preview License Agreement accompanying

** this package.

**

** GNU Lesser General Public License Usage

** Alternatively, this file may be used under the terms of the GNU Lesser

** General Public License version 2.1 as published by the Free Software

** Foundation and appearing in the file LICENSE.LGPL included in the

** packaging of this file.  Please review the following information to

** ensure the GNU Lesser General Public License version 2.1 requirements

** will be met: http://www.gnu.org/licenses/old-licenses/lgpl-2.1.html.

**

** In addition, as a special exception, Nokia gives you certain additional

** rights.  These rights are described in the Nokia Qt LGPL Exception

** version 1.1, included in the file LGPL_EXCEPTION.txt in this package.

**

** If you have questions regarding the use of this file, please contact

** Nokia at qt-info@nokia.com.

**

**

**

**

**

**

**

**

** $QT_END_LICENSE$

**

****************************************************************************/

#include <QtMultimedia/qaudio.h>

#include <QtMultimedia/qaudiodeviceinfo.h>

#include <QtMultimedia/qaudioengine.h>

#include <QtMultimedia/qaudioinput.h>

#include "qaudiodevicefactory_p.h"

QT_BEGIN_NAMESPACE

/*!

    \class QAudioInput

    \brief The QAudioInput class provides an interface for receiving audio data from an audio input device.

    \inmodule QtMultimedia

    \ingroup  multimedia

    \since 4.6

    You can construct an audio input with the system's

    \l{QAudioDeviceInfo::defaultInputDevice()}{default audio input

    device}. It is also possible to create QAudioInput with a

    specific QAudioDeviceInfo. When you create the audio input, you

    should also send in the QAudioFormat to be used for the recording

    (see the QAudioFormat class description for details).

    To record to a file:

    QAudioInput lets you record audio with an audio input device. The

    default constructor of this class will use the systems default

    audio device, but you can also specify a QAudioDeviceInfo for a

    specific device. You also need to pass in the QAudioFormat in

    which you wish to record.

    Starting up the QAudioInput is simply a matter of calling start()

    with a QIODevice opened for writing. For instance, to record to a

    file, you can:

    \code

      QFile outputFile;   // class member.

      QAudioInput* audio; // class member.

    \endcode

    \code

    {

      outputFile.setFileName("/tmp/test.raw");

      outputFile.open( QIODevice::WriteOnly | QIODevice::Truncate );

      QAudioFormat format;

      // set up the format you want, eg.

      format.setFrequency(8000);

      format.setChannels(1);

      format.setSampleSize(8);

      format.setCodec("audio/pcm");

      format.setByteOrder(QAudioFormat::LittleEndian);

      format.setSampleType(QAudioFormat::UnSignedInt);

      QAudioDeviceInfo info = QAudioDeviceInfo::defaultInputDevice();

      if (!info.isFormatSupported(format)) {

          qWarning()<<"default format not supported try to use nearest";

          format = info.nearestFormat(format);

      }

      audio = new QAudioInput(format, this);

      QTimer::singleShot(3000, this, SLOT(stopRecording()));

      audio->start(&outputFile);

      // Records audio for 3000ms

    }

    \endcode

    This will start recording if the format specified is supported by

    the input device (you can check this with

    QAudioDeviceInfo::isFormatSupported(). In case there are any

    snags, use the error() function to check what went wrong. We stop

    recording in the \c stopRecording() slot.

    \code

    void stopRecording()

    {

      audio->stop();

      outputFile->close();

      delete audio;

    }

    \endcode

    At any point in time, QAudioInput will be in one of four states:

    active, suspended, stopped, or idle. These states are specified by

    the QAudio::State enum. You can request a state change directly through

    suspend(), resume(), stop(), reset(), and start(). The current

    state is reported by state(). QAudioOutput will also signal you

    when the state changes (stateChanged()).

    QAudioInput provides several ways of measuring the time that has

    passed since the start() of the recording. The \c processedUSecs()

    function returns the length of the stream in microseconds written,

    i.e., it leaves out the times the audio input was suspended or idle.

    The elapsedUSecs() function returns the time elapsed since start() was called regardless of

    which states the QAudioInput has been in.

    If an error should occur, you can fetch its reason with error().

    The possible error reasons are described by the QAudio::Error

    enum. The QAudioInput will enter the \l{QAudio::}{StoppedState} when

    an error is encountered.  Connect to the stateChanged() signal to

    handle the error:

    \snippet doc/src/snippets/audio/main.cpp 0

    \sa QAudioOutput, QAudioDeviceInfo

    \section1 Symbian Platform Security Requirements

    On Symbian, processes which use this class must have the

    \c UserEnvironment platform security capability.  If the client

    process lacks this capability, calls to either overload of start()

    will fail.

    This failure is indicated by the QAudioInput object setting

    its error() value to \l{QAudio::OpenError} and then emitting a

    \l{stateChanged()}{stateChanged}(\l{QAudio::StoppedState}) signal.

    Platform security capabilities are added via the

    \l{qmake-variable-reference.html#target-capability}{TARGET.CAPABILITY}

    qmake variable.

*/

/*!

    Construct a new audio input and attach it to \a parent.

    The default audio input device is used with the output

    \a format parameters.

*/

QAudioInput::QAudioInput(const QAudioFormat &format, QObject *parent):

    QObject(parent)

{

    d = QAudioDeviceFactory::createDefaultInputDevice(format);

    connect(d, SIGNAL(notify()), SIGNAL(notify()));

    connect(d, SIGNAL(stateChanged(QAudio::State)), SIGNAL(stateChanged(QAudio::State)));

}

/*!

    Construct a new audio input and attach it to \a parent.

    The device referenced by \a audioDevice is used with the input

    \a format parameters.

*/

QAudioInput::QAudioInput(const QAudioDeviceInfo &audioDevice, const QAudioFormat &format, QObject *parent):

    QObject(parent)

{

    d = QAudioDeviceFactory::createInputDevice(audioDevice, format);

    connect(d, SIGNAL(notify()), SIGNAL(notify()));

    connect(d, SIGNAL(stateChanged(QAudio::State)), SIGNAL(stateChanged(QAudio::State)));

}

/*!

    Destroy this audio input.

*/

QAudioInput::~QAudioInput()

{

    delete d;

}

/*!

     Uses the \a device as the QIODevice to transfer data.

     Passing a QIODevice allows the data to be transfered without any extra code.

     All that is required is to open the QIODevice.

     If able to successfully get audio data from the systems audio device the

     state() is set to either QAudio::ActiveState or QAudio::IdleState,

     error() is set to QAudio::NoError and the stateChanged() signal is emitted.

     If a problem occurs during this process the error() is set to QAudio::OpenError,

     state() is set to QAudio::StoppedState and stateChanged() signal is emitted.

     \sa {Symbian Platform Security Requirements}

     \sa QIODevice

*/

void QAudioInput::start(QIODevice* device)

{

    d->start(device);

}

/*!

    Returns a pointer to the QIODevice being used to handle the data

    transfer. This QIODevice can be used to read() audio data

    directly.

    If able to access the systems audio device the state() is set to

    QAudio::IdleState, error() is set to QAudio::NoError

    and the stateChanged() signal is emitted.

    If a problem occurs during this process the error() is set to QAudio::OpenError,

    state() is set to QAudio::StoppedState and stateChanged() signal is emitted.

    \sa {Symbian Platform Security Requirements}

    \sa QIODevice

*/

QIODevice* QAudioInput::start()

{

    return d->start(0);

}

/*!

    Returns the QAudioFormat being used.

*/

QAudioFormat QAudioInput::format() const

{

    return d->format();

}

/*!

    Stops the audio input, detaching from the system resource.

    Sets error() to QAudio::NoError, state() to QAudio::StoppedState and

    emit stateChanged() signal.

*/

void QAudioInput::stop()

{

    d->stop();

}

/*!

    Drops all audio data in the buffers, resets buffers to zero.

*/

void QAudioInput::reset()

{

    d->reset();

}

/*!

    Stops processing audio data, preserving buffered audio data.

    Sets error() to QAudio::NoError, state() to QAudio::SuspendedState and

    emit stateChanged() signal.

*/

void QAudioInput::suspend()

{

    d->suspend();

}

/*!

    Resumes processing audio data after a suspend().

    Sets error() to QAudio::NoError.

    Sets state() to QAudio::ActiveState if you previously called start(QIODevice*).

    Sets state() to QAudio::IdleState if you previously called start().

    emits stateChanged() signal.

*/

void QAudioInput::resume()

{

     d->resume();

}

/*!

    Note: This function can be called anytime before start(), calls to this

    are ignored after start(). It should not be assumed that the buffer size

    set is the actual buffer size used, calling bufferSize() anytime after start()

    will return the actual buffer size being used.

*/

void QAudioInput::setBufferSize(int value)

{

    d->setBufferSize(value);

}

/*!

    If called before start(), returns platform default value.

    If called before start() but setBufferSize() was called prior, returns value set by setBufferSize().

    If called after start(), returns the actual buffer size being used. This may not be what was set previously

    by setBufferSize().

*/

int QAudioInput::bufferSize() const

{

    return d->bufferSize();

}

/*!

    Returns the amount of audio data available to read in bytes.

    NOTE: returned value is only valid while in QAudio::ActiveState or QAudio::IdleState

    state, otherwise returns zero.

*/

int QAudioInput::bytesReady() const

{

    /*

    -If not ActiveState|IdleState, return 0

    -return amount of audio data available to read

    */

    return d->bytesReady();

}

/*!

    Returns the period size in bytes.

    Note: This is the recommended read size in bytes.

*/

int QAudioInput::periodSize() const

{

    return d->periodSize();

}

/*!

    Sets the interval for notify() signal to be emitted.

    This is based on the \a ms of audio data processed

    not on actual real-time.

    The minimum resolution of the timer is platform specific and values

    should be checked with notifyInterval() to confirm actual value

    being used.

*/

void QAudioInput::setNotifyInterval(int ms)

{

    d->setNotifyInterval(ms);

}

/*!

    Returns the notify interval in milliseconds.

*/

int QAudioInput::notifyInterval() const

{

    return d->notifyInterval();

}

/*!

    Returns the amount of audio data processed since start()

    was called in microseconds.

*/

qint64 QAudioInput::processedUSecs() const

{

    return d->processedUSecs();

}

/*!

    Returns the microseconds since start() was called, including time in Idle and

    Suspend states.

*/

qint64 QAudioInput::elapsedUSecs() const

{

    return d->elapsedUSecs();

}

/*!

    Returns the error state.

*/

QAudio::Error QAudioInput::error() const

{

    return d->error();

}

/*!

    Returns the state of audio processing.

*/

QAudio::State QAudioInput::state() const

{

    return d->state();

}

/*!

    \fn QAudioInput::stateChanged(QAudio::State state)

    This signal is emitted when the device \a state has changed.

*/

/*!

    \fn QAudioInput::notify()

    This signal is emitted when x ms of audio data has been processed

    the interval set by setNotifyInterval(x).

*/

QT_END_NAMESPACE